This document provides commands to check various components and statuses in RNC and Node B equipment. Some examples include checking site status in RNC, E1 status and errors in Node B, Iub status of a site, alarms in RNC and Node B, hardware status in Node B, license status in Node B, and more. Instructions are given on using commands like lt, st, pget, altk, and others.

1. $$ To check the status all sites in the RNC.
RNC>> lt all
RNC>> strt
$$ To reload IUB link
Acc 0 manualrestart
$$ To Locke the particular site
RNC>> lt all
RNC>> bl <site name>
$$ To unlocke the particular site
RNC>> lt all
RNC>> deb <site name>
$$ To reload the cv of the site.
Node B>> lt all
Node B>> cv cu
Node B>>cv set (cv name )
Node B>> reload

2. $$ To check the E1 Status in the Node B
Node B>> lt all
Node B>> st e1
$$ To check the error in the E1 in Node B
Node B>> lt all
Node B>> pget e1
{We got three values and all these values should be constant , on multiple time by
typing this command , if values are constant , means no error . If the valves are not
constant , means there will be error in the E1.}
$$ To check the Iub status of particular site in the RNC.
RNC>> lt all

3. RNC>> get <site name> iub
RNC>> lk iub_ <iub>
$$ To check the Ima group of particular site in the RNC.
RNC>>lt all
RNC>> lst imagroup=<port detail>
(Ex- RNC>> lst imagroup=ES1 21-1 Vc 12-15)
$$ To check the alarms in the RNC.
RNC>> lt all
RNC>> altk

4. $$ To check the E1 quality , RNC to Node B
RNC>> lt all
RNC>> get <site name> iub
RNC>> lk iub_ <iub>
RNC>> st os155 (it will show all port detail , select at which u wants to check)
RNC>> lst <port detail> {(Ex- RNC>>lst os155spiTtp=MS-2-20) It will show all
the E1 and their proxy ID on this port}
RNC>> lpget <proxy id>
( We get three values and all should be constant on multiple typing this command ,
If values are constant , means no error . If the valves are not constant , means there
will be error in the E1.)

5. $$ To check the alarms in the Node B
Node B>> lt all
Node B>> altk
$$ To check the vswr values in the Node B
Node B>> lt all
Node B>> lh ru fui get vswr
$$ To check the hardware status in the Node B.
Node B>> lt all
Node B>> cabx

6. $$ To check the license status in the Node B.
Node B>> lt all
Node B>> license server
$$ To get the finger prints of the Node B.
Node B>> lt all
Node B>> get 6
$$ To check the alarms log in the Node B.
Node B>> lt all
Node B>> lgvesm
$$ To Remove the Antenna Branch B alarm in the Node B.
Node B>>lt all
Node B>> get . antennasupervision

7. Node B>> pr antennabranch=B
Node B>> set <brabch B proxy id> antennasupervisionthreshold
$$ To check the outage of the particular site.
RNC>> lt all
RNC>> pmx utrancell=<site name> pmcelldowntimeauto -m 5 ( 5 indicate
hours)
$$ To check the License .
RBS>> license status
$$ To check the neighbor relation .
RNC>> lpr utrancell=(mo name with sector)
$$ To check the alarm in the RNC at a particular node B.
RNC>> al | grep iub
$$ To check the VCID.

8. RNC>> get (site name) iub
RNC>> lk (iub)
RNC>> get (proxy id of atm cross connection)
$$ To check the alarm log .
RBS>> lga
$$ To check alarms date to date .
RBS >> lga -s date -e date
$$ To check the restart time of Node B.
RBS>> lgd -m days
$$ To Resolve the Password File Fault alarm.
RBS >> passwd;rbs;rbs
$$ To check the neighbors relation of the site .
RNC>> lget utrancell= (mo name) utranrelation
$$ To check the neighbors of the site .
RNC>> lpr utrancell= (mo name)

9. $$ To activate the emergency state in Node B.
RBS >> get 6
RBS >> acc 6 setemergencystate 1
$$ To check the NTP server IP.
RBS>> get 1
$$ To check the aal2 routing case value.
RBS>> get aal2sp
$$ To check the performance .
RBS>> pmr
RNC >> pmr
$$ To check the performance .
RBS>> pmxh -m 24 Iubdatastreams pmCapAllocIubHsLimitingRatioSpi02
$$ To Check the latency .
>telnet ip
>lhsh 000100 or >lhsh 000200
>000100>>EtHostMo_startPing –d (ntp server ip) –h 1 –c (packet no) –s 1400

10. $$ To Activate emergency state.
RBS>> acc 6 setemergencystate 1
$$ To check the RRC .
RNC>> pmx utrancell=mo rrc
Node B Feature state:-
set . featurestate16Qam 1
y
set . featurestateHsdpaFlexibleScheduler 1
y
set . featurestateHsdpaIncrementalRedundancy 1
y
set . featurestateEul2msTti 1
y
set . featurestateEnhancedLayer2 1
y
set . featurestate64Qam 1
y
set . featurestateGrake 1
y
set . featurestateDlPowerControlEul 1
y
set . featurestateHsdpaImprovedLinkAdaptation 1
y
set . featurestateHsdpaDynamicCodeAllocation 1
y
set . maxNumHsPdschCodes 14
y
set . maxNumEulUsers 16
y
set . maxhsrate 400
ipr uprade
lh ru nodeid read to check finger print
lh ru nodeid actual fingerprint write to change finger print

11. To change cp ip
1. Login RNC
2. Lst mo name
3. Get moname iub
4. Get iublink
5. Set 12919 remotecpipaddress1 ip
y
set numhscoderesources 2
y
NTP IPs
RNC ntpServerAddressPrimary ntpServerAddressSecondary
Gurgaon: 10.2.202.130 10.2.202.131
Noida: 10.2.203.59 10.2.203.60
Vikaspuri: 10.2.202.221 10.2.202.222
Okhla 10.2.203.130 10.2.203.131