This document provides an overview of coaxial cable construction. It discusses the various materials that make up a coaxial cable, including the conductor, dielectric, shielding, and jacket. For the conductor, it describes the different material options of copper, tinned copper, and copper-covered steel. It also discusses solid versus stranded conductors. For the dielectric, it explains solid versus foamed dielectric constructions and common dielectric materials like polyethylene and teflon. It details the different shielding options of foil, braid, and combination shielding. Finally, it briefly discusses common jacket materials and factors to consider for the cable jacket.
Basic Difference Between Wires and CablesDr.Raja R
Basic Difference Between Wires and Cables
What’s the basic difference between Wires and Cables?
List some of the basic differences between Wires and Cables
Different uses of Wire and Cable
Types of Wire and Cable
Different advantages of using Wire and Cable
Wire Manufacturer In Pune - Elcab Conductorsbizporto.com
Elcab Conductors was established in Pune in 1994 by Mr. Anil Jhamtani, an engineer from the coveted College of Engineering, Pune. As one of the leading engineering corporations, Elcab Conductors provides end-to-end solutions, helping its customers use electrical energy effectively and increase productivity with sustainability. Elcab Conductors is consistently growing, having two well equipped plants with state-of-the-art manufacturing equipment & technology for manufacturing tinned copper braids and cables.
Basic Difference Between Wires and CablesDr.Raja R
Basic Difference Between Wires and Cables
What’s the basic difference between Wires and Cables?
List some of the basic differences between Wires and Cables
Different uses of Wire and Cable
Types of Wire and Cable
Different advantages of using Wire and Cable
Wire Manufacturer In Pune - Elcab Conductorsbizporto.com
Elcab Conductors was established in Pune in 1994 by Mr. Anil Jhamtani, an engineer from the coveted College of Engineering, Pune. As one of the leading engineering corporations, Elcab Conductors provides end-to-end solutions, helping its customers use electrical energy effectively and increase productivity with sustainability. Elcab Conductors is consistently growing, having two well equipped plants with state-of-the-art manufacturing equipment & technology for manufacturing tinned copper braids and cables.
Construction of cables
Parts of a cable
Properties of cable insulators
Properties of conductors
Types of cables
Underground cables
Methods of laying underground cables
Types of cable faults
Comparison between overhead and underground cables
Xiamen Winlink Cable Factory, is a professional manufacturer of electronic electronics & communication cables, relative patch cords and accessories.
Our products cover spheres of CCTV, MATV, Ethernet network, audio & video and automatic control etc.
Product Series:
Coaxial cable for satellite TV, CATV, CCTV like RG6/RG59/RG58/RG11/RG8 etc;
Cat5e/Cat6/Cat7 Lan cable etc for Telecommunication Network;
Electrical cable, Speaker cable, Control cable and cable accessory.
Contact us at:
danniesliuy@gmail.com
Complete Description of High Quality Tempsens Make Instrumentation, Control, Signal and Mineral Insulated (MI) Cables and Wires
And Insulation offered on wires and cables.
These Cables and wires covers wide areas of applications in different types of process industries and OEMs.
Construction of cables
Parts of a cable
Properties of cable insulators
Properties of conductors
Types of cables
Underground cables
Methods of laying underground cables
Types of cable faults
Comparison between overhead and underground cables
Xiamen Winlink Cable Factory, is a professional manufacturer of electronic electronics & communication cables, relative patch cords and accessories.
Our products cover spheres of CCTV, MATV, Ethernet network, audio & video and automatic control etc.
Product Series:
Coaxial cable for satellite TV, CATV, CCTV like RG6/RG59/RG58/RG11/RG8 etc;
Cat5e/Cat6/Cat7 Lan cable etc for Telecommunication Network;
Electrical cable, Speaker cable, Control cable and cable accessory.
Contact us at:
danniesliuy@gmail.com
Complete Description of High Quality Tempsens Make Instrumentation, Control, Signal and Mineral Insulated (MI) Cables and Wires
And Insulation offered on wires and cables.
These Cables and wires covers wide areas of applications in different types of process industries and OEMs.
Different Cable Wires And Their ApplicationsCabcon India
Electrical wires are the foundation of every electrical circuit we observe. When these are linked to the correct terminals, they create enough power to run them. A multitude of factors influences the type of cable to be used, depending on the application.
1. Coaxial Cable Construction
This section provides an introduction to understanding coaxial cable construction. These fundamentals will allow you to understand the basic
materials that are used in the construction of a coaxial cable. A coax cable type is determined by the specifications of the system installed, basic
electronic principles, environment, and regulatory agencies. These various criteria dictate the type of conductor, gauge of wire, type of insulation,
shielding, and type of jacket. A basic understanding of coaxial cable construction should be helpful in selecting and installing the proper cable
for a particular system.
Conductors
Conductors for coaxial cables can vary greatly from stranded conductors for
maximum flexibility to copper covered steel which provides a stronger cable
that will withstand a greater physical strain than copper. The American Society
For Testing and Materials (ASTM) standards are followed for all of West Penn
Wire conductor materials. The ASTM Standard defines standard requirements such
as tensile strength, elongation, resistivity, dimensions, permissible variations, fin-
ish, inspection and testing.
Dielectric
Conductor Material A coaxial cables dielectric is a highly resistive material that is applied to the
There are several types of material that conduct electricity well (aluminum, conductor to resist the flow of electric current to the shield. It also sets up a
nickel, gold, silver). However, copper is the most popular due to its excellent cables electrical characteristics. There are several types of insulation materials
conductivity compared to other material cost. West Penn Wire uses a variety of and constructions used and each has its advantages and limitations. The type of
conductors in our cable. Material used can be bare copper, tinned copper, and insulation selected is based upon the application of the cable. Insulation is also
copper covered steel. The conductor can consist of solid or stranded construction. referred to as the dielectric of a cable.
The type of conductor selected is determined by the application the cable will be
used for. Solid Dielectric ConstructionA
solid dielectric construction uses a process of extruding a solid material over
Solid Conductors the center conductor of a coaxial cable. It provides good electricals, added cable
A copper rod provides a solid conductor for a wire. A solid conductor offers strength and uniformity of termination. However, a solid dielectric provides
lower cost and is easily formed to any shape desired. A solid conductor does poorer electricals and less velocity of propagation than cellular designs.
not have much flexibility and may break if flexed too much in one place. Foamed (Cellular) Dielectric Construction
For these reasons, a solid conductor is best suited for use in a fixed or A cellular dielectric construction uses a process of extruding a cellular material
permanent installation. over the center conductor of a coaxial cable. This improves the dielectric constant
Stranded Conductors of the dielectric material which improves the electricals of a coaxial cable. The
By combining several strands together, a stranded conductor can be formed. dielectric material exhibits a lower capacitance, which in turn provides lower loss.
A stranded conductor is easy to pull, is flexible and is less likely to break if This dielectric material also provides a higher velocity of propagation. With the
subjected to frequent bending. The finer the strands and the more strands advent of the "Gas Injection" process, cable manufacturers are able to improve
used to assemble a conductor the more flexible the conductor becomes. their cellular design and provide a lower loss cable with higher velocity of
Therefore, stranded cable is ideal for installations where frequent movement propagation values.
of the cable is required.
Bare and Tinned Conductors Dielectric Materials
Conductors can be either tinned or plain bare copper. Most electronic connectors Polyethylene
today are designed to be used with bare copper. In cables that are terminated This compound offers excellent electrical properties providing for low loss of a
with soldered connectors, tinned plated conductors can help in soldering the wire signal. However, it can only be used on a non-plenum rated cable because the
to the connector. compound has a poor flame and smoke retardancy.
Copper-Covered Steel Teflon® (FEP)
This type of conductor uses a steel conductor covered with copper. This type of A premium insulation that provides excellent electrical and mechanical proper-
conductor make-up is used for RF applications that require a cable to withstand ties. This compound is widely used as a dielectric for coaxial cables providing
added tension. The steel provides added strength and the copper provides good low loss and the ability to withstand high temperatures and also having low
conductivity for higher RF signals such as CATV. This type of conductor is not good flame and smoke characteristics.
for low frequency transmission, such as CCTV.
2. Coaxial Cable Construction
Shielding Foil/Braid
There are basically three types of shielding techniques: This is the most common type of combination shielding. The aluminum foil is
placed around the dielectric and then a braided shield is applied over top the
1. Foil Shielding, 2. Braid Shielding, 3. Combination Shielding aluminum foil. The metallic side of the foil shield is usually in contact with the
Shielding is utilized to prevent radiation and signal loss of high frequencies used braid. The braid is then used for shielding as well as ground termination elimi-
in electronic circuits and to reduce EMI/RFI interference. However, shielding nating the need for a drain wire. There are various types of shieldings offered
tends to increase the overall capacitance of the cable. on West Penn Wire coaxial cable:
Foil Shield 1. Quad Shield - A Foil-Braid-Foil-Braid combination shield construction.
Foil shields are usually made of a thin layer of aluminum bonded to a polyester This provides maximum shielding against EMI/RFI interference.
film. A foil shield allows for 100% coverage if applied with an appropriate
2. Tri-Shield - A Foil-Braid-Foil combination
overlap construction. It is very good in reducing Radio Frequency (RF)
interference, but does not perform as well in blocking Electro Magnetic 3. Triaxial - A Braid-Separator-Braid combination shield construction.
Interference (EMI). Foil shields do provide easy termination and low cost
protection, although they are fragile (low tensile strength and impact resistance).
BiFoil
This type of foil shield allows for added protection by increasing the metallic
coverage without adding increased thickness to the diameter of the cable.
Mainly, used in coaxial cables, the BiFoil shield is an aluminum-polyester-
aluminum tape with 100% coverage.
Bonded BiFoil
This type of foil shield has the same aluminum-polyester-aluminum construction
as the BiFoil shield, but is also bonded to the dielectric with adhesive. This allows Jackets
for better shielding capabilities and also provides excellent ease of stripping and The cable jacket is for strength, integrity, and overall protection of the other
termination because the foil does not pull away from the dielectric. components inside the jacket. There are a variety of jacketing materials that
are used in cable construction. Standard compounds and special variations of
Braid Shield
these compounds can be used in making the jacket. The selection of cable with
Braided shields can be constructed in various coverages (95% - 98% being about
the proper jacket and conditions of the environment the cable will be installed
the highest coverage available with this type of shielding). The material can be
in are important considerations. Environmental parameters that should be
bare copper, tinned copper, or aluminum. Depending on the amount of coverage,
considered include temperature variations, chemical reactance, sunlight
braid shields reduce EMI interference well, but are not as effective in the RF
resistance, mechanical and abrasion impact. Jackets are sometimes made up
range. Copper braided shields also allow for a much lower shield D.C.
of the same material as insulation used on a dielectric. To learn more about
resistance than foil shields.
various compound properties, please refer to the Dielectric Section.
Combination Shielding
This technique offers the best of both types of shielding. First a foil shield is
applied around the dielectric and then a braided shield is placed on top of the
foil shield. This allows for greater coverage in blocking both EMI and RFI
signals. There are also several versions of this basic technique such as triaxial
and quad shielding.