CNZKING INDUSTRIAL PUMP PRODUCT BROCHUR0705.pdf

PRODUCT BROCHUR
As a professional Industrial / Slurry Pump manufacture,
ZKing always give top priority to products quality and
follow the instructions of ISO9001 faithfully.
ZKING INDUSTRIAL
SLURRY PUMP
www.kingslurrypump.com

02 Product Description
03 Zking Project
04 Company Vision
COMPANY
01 Company introduction

1
As a professional Industrial / Slurry Pump
manufacture, ZKing always give top priority to
products quality.
The main products such as Slurry Pump, Dredging
Pump, Froth Pump,Desulfurization Pump,and
Feeding Pump for Filter Press are widely used
in Mineral processing, Metallurgy, Coal industry,
Electric power, Petrochemical
industry,Dredging,Stack gas desulfurization, and
Environmental protection industries.
ABOUT ZKING

ZH Series Slurry Pump ZG(H) Sand Pump
ZV(R) Submerged Slurry Pump
PRODUCT CATEGORIES
ZHH Series Slurry Pump

ZHF(R) Foam Slurry Pump
PRODUCT CATEGORIES
ZF/QV Vertical Froth Pump
ZJ Series Slurry Pump
ZGB/ZGB(P) Slurry Pump

PRODUCT CATEGORIES
Submersible Sewage Pump Submersible Slurry Pump
Double Suction Water Pump
Single Stage Water Pump

Product Features
Structure type
Type ZH/ZHR/ZHH/ZL slurry pumps are double shell cantilever horizontal centrifugal pump.
Transport materials
They are designed for conveying strong corrosion and high
concentration slag slurry.
Applications
They are widely used in metallurgy, mining, petroleum,
chemical industry, coal, electric power, transportation,
river dredging, building materials and municipal engineering etc.
Lining Materials
Wear resistant metal lining and rubber lining , they can be
used interchangeably.
Transmission Mode
DCZ direct drive, CRZ parallel belt drive , ZVZ upper and
lower belt drive, CV belt drive.
Shaft Seal Mode
Packing Seal, Expeller Seal,Mechanical Seal,etc
ZH/ZHR/ZHH/ZL Slurry Pump

Construction Design

Shaft Seal Module Design
Packing Seal，Expeller Seal，Mechanical Seal

Eight Exit Directions
The same inlet can have eight outlet directions of ABCDEFGK.
B bracket has only four mounting angles of ACEG.
B outlet pipe direction is not suitable for CV drive.

Four Transmission Modes

ZG(H) Gravel Pump
Product Features
Structure type
It adopts the single pump shell structure connected by clamp belt, which is a single-stage single suction cantilever
horizontal centrifugal pump.
Transport materials
This type of pump has a large overflow channel and is suitable for conveying gravel, mud and slag slurry with large
solid particles.
Applications
It is mainly used for the transportation of large particle
slurry commonly used in river sand dredgers and river
dredging dredgers. Also beneficiations, coal washing,
metal smelting，slag blasting and other processes.

ZG(H) Gravel Pump
Product Features
Flow passage componnts
Hard nickel, high chromium and other wear-resistant materials are adopted, which has good wear resistance,
corrosion resistance and high reliability
Transmission Mode
Shaft seal mode
Packing Seal,Expeller Seal,Mechanical Seal,etc.

ZG(H) Gravel Pump
Pump outlet diameter 100~400
Flow Q（m³/h） 36~3384
Head of delivery H (m) 7~79.50
ZG/ZG（H）Applicable parameter range

Product Features
Structure type
It is a vertical centrifugal slurry pump.
Transport materials
It’s suitable for conveying abrasive or corrosive slag slurry.
Applications
It is widely used in metallurgical, mining, coal, electric power, building materials, chemical and
other industrial departments. The submerged slurry pump is divided into
ZV type and ZVR type, with the same structure. ZV type submerged slurry pump, the flow passage parts
and shaft are made of wear-resistant metal, which is suitable for conveying abrasive slurry.
ZVR type rubber lined submerged slurry pump, the flow passage parts are lined with corrosion-resistant
rubber, which is suitable for conveying acidic or corrosive slurry.
The letter L contained in the model is the extended shaft series submerged slurry pump, which can be
applied to the working condition under deep water

Product Features
Transmission Mode
DC direct drive or BD belt drive can be adopted, and the
sheaves can be easily replaced
Installation and usage
It can work in the pool or pit without any shaft seal or shaft
seal water.

Anatomical drawing

Product Features
Structure type
Horizontal double pump casing structure is adopted.
Applications Transport materials
It is mainly used in metallurgy, mines, coal, chemical plants and flotation plants to
treat some corrosive slag slurry with large foam content. The pump can effectively
eliminate the foam in the slurry and is an ideal product for conveying foam slurry.
Product design
With the unique semi open foam guide impeller design, the
foam can be effectively introduced into the slurry pump,so
the viscous slurry can be treated more efficiently. The
enlarged high-efficiency front sheath can maximize the
inlet size and reduce the necessary NPSH.

Product Features
Transmission mode
Flow passage components
The pump head structure is a double pump shell structure.
According to different transmission media, the overflow
parts can be made of metal or rubber materials.
Sealing mode
Packing seal, Expeller seal, Mechanical seal.

Anatomical drawing

ZF/QV Vertical Froth Pump
Product Features
● Material: A05 high chrome iron alloy
● Function: Delivering foam slurries
● Type: Vertical
● Theory:CentrifugalApplications Transport materials
The ‘ZF’ range is available in sizes ranging from 50mm up to 200mm discharge diameter.
Applications:
It is widely used in metallurgy, mining, coal, chemical and other industrial sectors.
It is suitable for conveying abrasive or corrosive slurry containing foam.
This series of pumps can effectively eliminate foam in the slurry during operation. It can still work normally in the case of
insufficient incoming materials, especially suitable for various flotation processes,
and it is an ideal product for conveying foam slurry.

ZF/QV Foam Slurry Pump
Structural Features
1. This type of pump is used in SP, SPR, PNL type bearing assemblies.
The bearing body is equipped with a motor seat or a motor frame,
which can be directly driven or indirectly driven, and the pulley can be
easily replaced to change the speed of the pump to meet the Working conditions change.
2. The material box is made of steel structure or stainless steel, steel lined with rubber, etc.
It is equipped with a tangential feeding port and an overflow box. The overflow
box can easily send the excess incoming material back to the material pool,
and the tangential inlet can make the material quickly into the pump and
eliminate some of the foam.
3. The pump head structure is a double pump shell structure. According
to the different conveying medium, the flow parts can be made of metal, rubber, or other non-metallic materials.

ZF/QV Vertical Foam Pump
Anatomical drawing
1.Frame Plate
2.Cover Plate
3.Cover Plate Liner Insert
4.Volute Liner
5.Impeller
6.Frame Plate Liner
7.Tank
8.Shaft
9.Bearing Box

ZJ Slurry Pump
Product Features
Structure type
ZJ/ZJL type slurry pump is a single-stage single-suction centrifugal slurry pump, inside and outside
the double shell structure, the pump shell vertical in open type, the outlet position can be rotated
by 45 degrees interval 8 different angle installation use.
Transported material
It is suitable for hydraulic ash removal in hydropower plants, metallurgical beneficiation slurry
transportation, coal slurry and heavy medium transportation in coal washing plants, etc.
Application
Widely used in metallurgy, coal, electric power, building materials and other industries.
Lining material
Abrasion resistant metal liners Abrasion resistant metal cross-flow parts
Drive type
Direct drive

ZJ Slurry Pump
Technical parameters
Outlet diameter (mm) 40~350
Flow rate (Q)
4.50~2826
Head (H)
9.10~133.70
Shaft seal type
Packing seal, expeller seal, mechanical seal and other sealing methods
Installation and use
The pump can be installed at 45 degree intervals and rotated at eight different angles as required.
The pump can also be used in series with multiple stages.

Product characteristics
Structure type
ZGBP/ZGB(P) type slurry pump is a horizontal, single-stage, single-suction, cantilever
centrifugal slurry pump
Conveying material
Containing corrosive or corrosive slurry, especially suitable for power plant ash slurry
conveying
Installation and use
The pump can be installed at 45 degree intervals and rotated at eight different
angles according to the pump's outlet position. This type of pump can also be used
in series with multiple stages.
Application scope
Metallurgy, mineral processing, mining, electric power, coal, building materials,
chemical industry, etc.

Lining material
Anti-abrasive metal lining Anti-abrasive metal overflow parts
Transmission mode
Direct transmission
Shaft seal mode
Packing seal, expeller seal, mechanical seal and other sealing methods
Technical parameters
Pump outlet diameter (mm) 65~300
Flow rate (Q) 37.80~1631.90
Head (H) 25.40~95.50

IS series single-stage single-suction Centrifugal Water Pump
Model meaning: e.g.
IS80-65-160A
IS: Single-stage single-suction clean water centrifugal pump
80: Pump inlet diameter (mm)
65: Pump outlet diameter (mm)
160: Impeller diameter (mm)
A: The first cutting of the outer diameter of the impeller
B: Indicates the second cutting of the outer diameter of the impeller
Performance parameters:
Suction diameter (mm): 50-300
Discharge diameter (mm): 32-250
Flow range (m³/h): 3.4-1200
Lift range (m): 3.7-133
With power (KW): 0.55-132

Double Suction Water Pump
Production type: SH
Application: Double suction pumps are used for pump stations.
Model meaning:
Model meaning: e.g.
10SH-13A(B)
10: The suction diameter is multiplied by 25 (that is, the suction diameter is 250mm)
SH: single stage double suction centrifugal pump
13: The specific revolution is multiplied by 10 (that is, the specific revolution is 130)
A: The first cut of the outer diameter of the impeller
B: The second cutting of the outer diameter of the impeller
Suction diameter (mm): 150-1200
Flow range (m³/h): 112-14400
Lift range (m): 6-140
With power (KW): 22-3450

Conveying material:
1. Urban sewage, industrial sewage, waste water, mixed water.
2. Surface water, raw water (river water containing solid and fibrous substances).
3. Untreated mud water, active sediment, industrial sediment.
4. Purified water
Submersible Sewage Pump
Application areas:
1. Drainage of buildings, ditches, dams, tunnels and land.
2. Pumping and discharging of raw water, mixed water, natural sewage and mud water.
3. Treatment and extraction of sewage sediment recycling fluid and garbage.
4. Pumping, irrigation and drainage, surface treatment, water source protection, water level
control in open-pit mining.

Flow (m³/h): 7-3000
Head (m): 5.6-46
With power (KW): 0.75-200
Model meaning: e.g.
ZWQ40-30-7.5
ZWQ: Submersible Sewage Pump
40: Pump design point flow (m³/h)
30: Design point single-stage head (m)
7.5: Motor power (KW)
ZWBQ40-30-7.5
ZWBQ: Submersible sewage pump with automatic protection device
30: Design point single-stage head (m)
7.5: Motor power (KW)
Submersible Sewage Pump

Applications:
This product is suitable for conveying slurry containing abrasive particles such as sand,cinder,tailings,etc. It is
mainly used in metallurgy, mining, electric power, chemical industry,environmental protection, river dredging,
sand pumping, municipal engineering and other industries. This product is easy to install and move, has high
slag extraction efficiency,and can run for a long time under harsh working conditions.
Model meaning: e.g.
ZZQ40-30-7.5
ZZQ: submersible slurry pump
30: Pump design point single-stage lift (m) 7.5: Motor power (KW)
ZZBQ40-30-7.5
ZZBQ: Submersible slurry pump with automatic protection device
30: Pump design point single-stage lift (m) 7.5: Motor power (KW)
Submersible Slurry Pump

Applicable Conditions:
1. Power supply 380V, 50HZ (voltage and frequency can be customized according to requirements).
2. The temperature of the medium generally does not exceed 60℃, the PH value is 4-10, and the weight of the
medium is ≤1300kg/m³.
3. Suitable for medium with strong abrasive solid particles and mildly corrosive sewage slurry.
4. The diameter of the solids in the medium should not be larger than 80% of the minimum flow channel size
of the pump.
Flow (m³/h): 35-3000
Head (m): 5.7-44.5
With power (KW): 4-220
Submersible Slurry Pump

Pictures of Common Accessories

ZKing Workshop Pictures

Zking Industrial Pump Installation Pictures

+86-13903116635
Contact Us
sales11@kingslurrypump.com
Email
Web.
Northeast of Lingshou Economic Development
Zone,Shijiazhuang,Hebei,China
Add.

Thanks!

CNZKING INDUSTRIAL PUMP PRODUCT BROCHUR0705.pdf

Recommended

Recommended

More Related Content

Similar to CNZKING INDUSTRIAL PUMP PRODUCT BROCHUR0705.pdf

Similar to CNZKING INDUSTRIAL PUMP PRODUCT BROCHUR0705.pdf (20)

Recently uploaded

Recently uploaded (20)

CNZKING INDUSTRIAL PUMP PRODUCT BROCHUR0705.pdf