This document is from the website of Hebei Muyuan Pump Industry Co., Ltd. It summarizes their high head slurry pump model called the MH pump. Some key details include:
- The MH pump is a horizontal, centrifugal slurry pump designed for high head applications requiring heads from 12 to 95 meters.
- It can be adopted as a single pump rather than requiring series pumping, reducing capital costs while maintaining efficiency and wear life.
- The document provides specifications for flow rates from 16 to 1125 cubic meters per hour and discharge sizes from 1 to 6 inches.
- It describes seal options, wear resistant liner materials, and includes a selection chart and specifications for different M
The MG series gravel pumps are designed for continuously handling the most difficult higher abrasive slurries which contain too big solids to be pumped by a common pump. The pumps are suitable for delivering slurries in mining, explosive sludge in metal melting, dredging and so on. Single casing with exceeded passage and lowered NPSHr makes MG pumps as a best selection for dredging, delivering sludge I mining plant.
The removal
of abrasive slurry, an essential operation
in many industries, makes heavy demands
on
slurry pumps. Designed to solve the specific problems
of pumping high-density slurry, 5100/5150,
the latest generation
of submersible slurry pumps
from Xylem, is a cost-effective solution offering
true reliability.
This industrial training flyer (Helical rotor pumps - benefits and limitations) is from our CD with 150 Maintenance training flyers on it.
If you want to see what free maintenance flyers might come up in the future, or want to purchase all 150 today, please see the product page below.
http://www.bin95.com/ebooks/CD_contents.htm
Vertical, single-stage or two stage submersible motor pump made of wear-resistant industrial materials in close-coupled design, for wet installation, stationary and transportable version.
Irrigation and pumping stations, handling of raw and clean water, of cooling water in power stations and industrial plants, industrial water supply systems, water pollution and flood control systems, aquaculture. Handling of water without stringy substances in irrigation and drainage pumping systems, general water supply systems, water pollution and flood control systems.
The MG series gravel pumps are designed for continuously handling the most difficult higher abrasive slurries which contain too big solids to be pumped by a common pump. The pumps are suitable for delivering slurries in mining, explosive sludge in metal melting, dredging and so on. Single casing with exceeded passage and lowered NPSHr makes MG pumps as a best selection for dredging, delivering sludge I mining plant.
The removal
of abrasive slurry, an essential operation
in many industries, makes heavy demands
on
slurry pumps. Designed to solve the specific problems
of pumping high-density slurry, 5100/5150,
the latest generation
of submersible slurry pumps
from Xylem, is a cost-effective solution offering
true reliability.
This industrial training flyer (Helical rotor pumps - benefits and limitations) is from our CD with 150 Maintenance training flyers on it.
If you want to see what free maintenance flyers might come up in the future, or want to purchase all 150 today, please see the product page below.
http://www.bin95.com/ebooks/CD_contents.htm
Vertical, single-stage or two stage submersible motor pump made of wear-resistant industrial materials in close-coupled design, for wet installation, stationary and transportable version.
Irrigation and pumping stations, handling of raw and clean water, of cooling water in power stations and industrial plants, industrial water supply systems, water pollution and flood control systems, aquaculture. Handling of water without stringy substances in irrigation and drainage pumping systems, general water supply systems, water pollution and flood control systems.
Chemical Industry Case Study: High Speed Dispersion of BentoniteMatt Smith
Find the solution for one of the toughest mixing applications in the chemical industry, dispersing bentonite. Read this case study on the Process, the Problem and the Solution.
Metal bridge decks must be perfectly waterproofed to protect the sheet metal from corrosion.
If in addition the bridge is subjected to heavy, intense traffic, the surface course will also be
required to withstand traffic-induced stresses such as rutting. Few processes can withstand such
treatment. The complex stresses to which these metal structures are subject make it very difficult
to devise a suitable technical solution.
Eurovia has developed an exclusive solution that can meet the most stringent requirements:Orthoplast.
AL TEROUS With 12 years extensive experience & know-how, we offers engineered systems, applications, components and service especially in Water Wastewater Treatment range
mechanical seals are an integral part on all fluid pumps and are a viable alternative for lip seals as well as packed glands. In practical applications, using these seals has been proven to increase pump longevity and make them usable for extended periods of time. http://www.sealsales.com/
ZJQ submersible slurry pump e catalogue in Non-clogging site conditionMarina Xu
ZJQ submersible slurry pump usually suitable for conveying liquid with solid of gravel, cinders, tailings, etc. 3.It’s mainly used in metallurgical industry, mining, coal-fired power plants, etc.
Medium & Light Duty Slurry Pump MM & ML
Pump type ML is the standard light duty slurry pump which designed for the continuous pumping of light abrasive, light density slurries with minimal maintenance requirements. The maintain high efficiencies over the wear life of its components and typical used in process plant transfers, wet waste processes recycling-washing plant, sad plant duties, heav minerals processing, mineral recovery and chemical process plant.
Pump type MA is the standard heavy duty slurry pump which designed for the continuous pumping of highly abrasive, high density slurries with minmal maintenance requirements. It maintains components. This type of pump typically used in process plant transfers, wet waste processes, recycling-washing plant, sand plant duties, heavy minerals processing, mineral recovery and chemical process plant.
The heavy duty sump pump MV is designed for applications requiring great reliability and durability. The bearing assembly allows the pump to operate in the “snore” condition without damage to the bearings, it is designed for handling abrasive slurries and corrosive fluids by using either elastomer or alloy lined wet ends components. The pump is suitable for mining, chemical treatment, waste water treatment, gravel and general process application.
Chemical Industry Case Study: High Speed Dispersion of BentoniteMatt Smith
Find the solution for one of the toughest mixing applications in the chemical industry, dispersing bentonite. Read this case study on the Process, the Problem and the Solution.
Metal bridge decks must be perfectly waterproofed to protect the sheet metal from corrosion.
If in addition the bridge is subjected to heavy, intense traffic, the surface course will also be
required to withstand traffic-induced stresses such as rutting. Few processes can withstand such
treatment. The complex stresses to which these metal structures are subject make it very difficult
to devise a suitable technical solution.
Eurovia has developed an exclusive solution that can meet the most stringent requirements:Orthoplast.
AL TEROUS With 12 years extensive experience & know-how, we offers engineered systems, applications, components and service especially in Water Wastewater Treatment range
mechanical seals are an integral part on all fluid pumps and are a viable alternative for lip seals as well as packed glands. In practical applications, using these seals has been proven to increase pump longevity and make them usable for extended periods of time. http://www.sealsales.com/
ZJQ submersible slurry pump e catalogue in Non-clogging site conditionMarina Xu
ZJQ submersible slurry pump usually suitable for conveying liquid with solid of gravel, cinders, tailings, etc. 3.It’s mainly used in metallurgical industry, mining, coal-fired power plants, etc.
Medium & Light Duty Slurry Pump MM & ML
Pump type ML is the standard light duty slurry pump which designed for the continuous pumping of light abrasive, light density slurries with minimal maintenance requirements. The maintain high efficiencies over the wear life of its components and typical used in process plant transfers, wet waste processes recycling-washing plant, sad plant duties, heav minerals processing, mineral recovery and chemical process plant.
Pump type MA is the standard heavy duty slurry pump which designed for the continuous pumping of highly abrasive, high density slurries with minmal maintenance requirements. It maintains components. This type of pump typically used in process plant transfers, wet waste processes, recycling-washing plant, sand plant duties, heavy minerals processing, mineral recovery and chemical process plant.
The heavy duty sump pump MV is designed for applications requiring great reliability and durability. The bearing assembly allows the pump to operate in the “snore” condition without damage to the bearings, it is designed for handling abrasive slurries and corrosive fluids by using either elastomer or alloy lined wet ends components. The pump is suitable for mining, chemical treatment, waste water treatment, gravel and general process application.
A GENERAL VIEW ON MECHANICAL CENTRIFUGAL PUMP A CLASS OF HYDRAULIC MACHINE & MECHANICAL SEALS ON THE OVERVIEW AFTER INDUSTRY VISIT & CLOSE OBSERVATION ON ITS PERFOMANCE
We are a factory that has been producing slurry pumps and spare parts for over 11 years, with nearly 10 years’ export experience and with GOOD prices.
We specialize in:
1. AH/AHR/L/LR/M/HH series Slurry Pumps 2. G/GH series Sand Gravel Pumps 3. SP/SPR Vertical Sump Pumps 4. AF/AHF Froth Pumps 5. Replacement Parts 6. OEM Pump and Parts.
Plus, we have Mission Magnum XP 14/12-22.
Welcome to contact us for more information.
Shijiazhuang Minerals Equipment Co., Ltd(CNSME)
Tel: +8631166692398 Fax:+8631166692011
WhatsApp: +8615033351675
E-mail: sales66@cnmineralsequipment.com
Website: www.slurrypump.co
PEC's MPT series high pressure Triplex Plunger Pumps. Generally used for Car Washer, Reverse Osmosis, Chemical Injection, Boilers Feed Service, Hydraulic Testing, Cleaning of heat exchangers, Boilers, Towers, Chemical Vassels and Shop Floors under high pressure.
Capacity UP TO 300 M3/hr.
Pressure UP TO 1000 Kg/Cm2.
Sales7(at)tobeepump.com
Tobee® G/GH Sand Gravel Pumps are designed specifically for continuous pumping of extremely aggressive slurries, gavels, and sands. with a wide particle size distribution. Capable of handling large particles at consistently high efficiencies results in low cost of ownership. The large volume internal profile of the casing reduces associated velocities further increasing component life.
Design Features:
√ The unique segmented clamp ring on larger size units and solid on smaller pumps, facilitates casing rotation to any angle, reducing the need for costly high wearing bends. Minimal maintenance is required.
√ Impeller expulsion vanes reduce gland pressure and intrusion of high concentrations of solids in the gland area. Efficiency is maintained by minimising suction side recirculation.
√ Specially designed and shaped impeller vanes allow the handling of extraordinarily large particles. The unique casing design and sealing vanes prevent abrasive solids intrusion at the sealing faces.
√ The large, robust casing has been designed to reduce internal velocities resulting in minimum efficiency loss and improved casing wear life. The casing is made up of three components to reduce maintenance time and costs associated with a onepiece design. (Except the 6/4 DG which has two components)
√ Tobee heavy-duty grease lubricated taper roller bearing assemblies are fitted as standard. A rigid large diameter shaft with reduced overhang minimises deflection and vibration under all conditions ensuring trouble free operation. Unusually high service factors enable the assembly to carry all radial and axial thrusts.
√ A unique “-10” (dash 10) end cover assembly comprising of V-seals, double piston rings and an external flinger with grease lubricated labyrinths are standard with all warman pumps .
Tobee® G/GH Sand Gravel Pumps Applications:
G/GH heavy-duty sand & gravel pump design typically caters for high head high volume duties, The Gravel pumps are best suited to Sand & Gravels, Dredging, Cutter Suction Dredger, Sand Excavation, Coal Washing, Tunnels, Power Plant, Mineral Processing Plants, Higher head cyclone feed or Long distance pipeline duties and Other industries.
The slurry is one of the challenging fluids to pump. Learn how & why slurry pump selection can improve the long-term performance of these centrifugal pumps
We at Cosmos Pumps are on a mission to be the number one choice for all dewatering needs across the globe. And we are fulfilling this need by manufacturing state of the art dewatering pumps and providing top-notch sales, rental and turnkey services of dewatering pumps all over.
Why are multi springs used for mechanical seals?LEAK-PACK
Multi-spring mechanical seals are unbalanced and single-acting. Thus, a multi-spring mechanical seal is an important part of centrifugal and other pumps.
Introduction to Different Types of End Suction PumpsFlowmore Pumps
End suction pumps are perhaps the most well-known type of pumps. Practical and solid, they are reasonable for the scope of pumping applications. They are quite often single-stage pumps, meaning they have just a single impeller.
MATHEMATICS BRIDGE COURSE (TEN DAYS PLANNER) (FOR CLASS XI STUDENTS GOING TO ...PinkySharma900491
Class khatm kaam kaam karne kk kabhi uske kk innings evening karni nnod ennu Tak add djdhejs a Nissan s isme sniff kaam GCC bagg GB g ghan HD smart karmathtaa Niven ken many bhej kaam karne Nissan kaam kaam Karo kaam lal mam cell pal xoxo
NO1 Uk Amil Baba In Lahore Kala Jadu In Lahore Best Amil In Lahore Amil In La...Amil baba
Contact with Dawood Bhai Just call on +92322-6382012 and we'll help you. We'll solve all your problems within 12 to 24 hours and with 101% guarantee and with astrology systematic. If you want to take any personal or professional advice then also you can call us on +92322-6382012 , ONLINE LOVE PROBLEM & Other all types of Daily Life Problem's.Then CALL or WHATSAPP us on +92322-6382012 and Get all these problems solutions here by Amil Baba DAWOOD BANGALI
#vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore#blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #blackmagicforlove #blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #Amilbabainuk #amilbabainspain #amilbabaindubai #Amilbabainnorway #amilbabainkrachi #amilbabainlahore #amilbabaingujranwalan #amilbabainislamabad
1. www.muyuan-pump.com
HEBEI MUYUAN PUMP INDUSTRY CO., LTD
Add: No.8 Guangming Road, Industrial Park, Xingtang County, Shijiazhuang, Hebei, China.
Website: www.muyuan-pump.com
Tel: +86-311-80781587
Fax: +86-311-87706011
E-mail: sales@cnmuyuan.com
2. Mill Discharge
Coarse Sand
Tailings
Mineral Concentration
Heavy Media
Coal Washing
Phosphoric Acld
Process Chemical
Bottom/Fly Ash
Metal Smelting
Typical Application
The MH high head slurry pump is cantilevered, horizontal, centrifugal slurry pump, which is specifically designed to combat the need to run
conventional design slurry pumps at excessive speeds to generate high heads often required in many modern slurry pumping applications. Single
pump unit rather than series pumping can be adopted, at greatly reduced capital cost, while still offering optimum wear life and efficiency.
3
Flow Rate (m /h)
Flow Rate(US gpm)
Discharge Size:1" to 6"
3
Capacity:16 to 1125 m /h
Head:12 to 95 m
MH Pump Quick Selection Chart
MH-High Head Heavy Duty Slurry Pump
Total
head
(meters)
Total
head
(feet)
5 10 2 3 4 6 8 100 2 3 4 6 8 1000 2000
20
40
6 8
5
10000
4
0
3 5 6 6
8 8
20 100
2 2
3 3
4 4
5
1000
60
100
200
300
500
400
80
100
140
120
1.5/1-MH
3/2-MH
4/3-MH
6/4-MH
8/6-MH
4 / 3 E - MH
High Head Heavy Duty Slurry Pump
Base Type
About MUYUAN
Hebei Muyuan Pump Industry was established in 2005, and it
covers an area of 75,000 square meters. It set up foundry shop,
machining shop, assembly shop, pump research & testing center.
Muyuan Pump focuses primarily on the production and supply of
high quality slurry pump, centrifugal clear water pump, and
petrochemical process pumps. With an annul output of 8,000 sets
of pumps, 20,000 tons of wear-resistant parts, which are widely
used for the mining, mineral processing, power plant, chemical and
other industries.
With years of experiences in developing innovative wear resistance
products for varies industries, Hebei Muyuan offers excellence fluid
handling solutions for mining, dredging, mineral processing,
chemical process and related industry.
Muyuan not only specialized in providing kinds of pumps and wear
resistant products, but also be your local “Personal Tailor” to fully
provide you with customized innovative design, products support
and on site services.
3. Shaft
Sleeve
Shaft
Spacer
Centrifugal Seal or Expeller Seal or Dynamic Seal-The centrifugal seal consists of expelling vanes on the back of the impeller and an
expeller which rotates in unison with the impeller. The expeller is located in a separate chamber behind the impeller. The expeller acts
as a turbine to reduce the pressure of the slurry attempting to escape around the back of the impeller. The expeller forms a pressure
ring within the expeller chamber and prevents the slurry from passing into the secondary seal area.
Gland Seal-The gland seal comprises a number of soft packing rings, compressed in a chamber (stuffing box) against a protective wear
sleeve which fitted to the pump shaft. This type of seal requires continuous clean flushing water lubrication and cooling between the
rotating shaft sleeve and the compressed packing, to prevent over heating due to the friction.
Mechanical Seal-When it is essential for the leakage to be prevented entirely, then mechanical seals should provide a solution. The
mechanical seal consists of a stationary and rotating face pressed together under mechanical and hydraulic pressure to prevent leakage.
Seal Options
Base
Mechanical Seal Assy
Mechanical
Seals Housing
Mechanical Seals
Expeller Seal Assy
High chrome alloy liners provide superior abrasion resistance & erosion resistance and maximum wear life
Large diameter, high efficiency impellers designed to meet high head requirement, maximum wear life and low operating cost
High head & high pressure
Discharge branch can be positioned at intervals of 45 degrees
The pump can be installed in multi-stage high pressure operation
Easy to maintain
Volute Liner
4. U
E
A
D
T
S M
C
V
F
K
L
N
B
H
G
J
Alloy M05 is particularly suited for greater impact load and fair
corrosion resistance, and it is used when pH range is 5-12.
Alloy M07 has lower wear resistance but higher impact resistance
than Alloy M05. It is used when pH range is 5-12.
Alloy M49 has certain erosion resistance and better corrosion and
abrasion resistance, which is used in mild acid application with pH =4,
particularly suitable for Flu Gas Desulphurization (FGD) applications.
Alloy M33 excels in erosion resistance and corrosion resistance, which
can be used in oxidizing medium with pH =1, such as delivery of
phosphogypsum and nitric acid, sulfuric acid and phosphoric acid, etc.
Alloy M12 has better wear resistance than Alloy M05, but it is not best
suited for corrosion application. It can be selected when pH ranges of
6-14, where Alloy M05 provides fair wear life.
Alloy M61 has better toughness compared to Alloy M12. Alloy M61
can be further hardened by adjusting heat treatment, thereby improve
its wear resistance. It is suitable for high abrasive slurry with fine
particles with pH ranges of 6-14.
06
1.5/1C-MH
3/2D-MH
4/3E-MH
4/3R-MH
6/4F-MH
8/6G-MH
Pump Size
759
986
1240
1284
1556
2070
406
492
622
680
857
1219
311
364
448
590
635
876
255
331
458
353
610
852
42
65
80
85
100
140
12×8
18×11
22×14
22×14
28×16
36×20
125
163
222
216
281
360
269
390
492
490
584
841
270
384
490
490
617
835
194
254
330
330
413
584
254
368
432
432
546
813
-
-
3
-
-
42.3
10
50
-
101
26
-
175
213
257
490
349
749
356
432
546
560
762
815
148
186
244
242
279
445
48
64
76
70
98
152
32
38
54
50
95
63.5
318
615
1208
1405
2526
7500
A B C D E F G H J K L M N V T S
U
mm
Key
Size
Weight
(KG)
Metal
Note: All the dimensions are in millimeter (mm).
Type CV, ZV (Z), CR (Z)/CL (Z) apply belt drive, the auxiliary equipment includes motor mount, pulley, belt, belt guard and fasteners.
Type DC (Z) is motor direct drive, the auxiliary equipment includes coupling, guard and fasteners.
Z means base included
CV
A major advantage of the slurry pump is the number of optional materials avaliable. This enables a pump to be constructed with the
most appropriate materials specifically to meet the duty requirements.
Further assistance with specific material selections, please contact with MUYUAN PUMP.