CMT-Revised Storyboard
•Download as PPTX, PDF•
0 likes•140 views
Debra wanted to get a unique tattoo but was disappointed with the designs from three different tattoo parlors. She almost gave up until learning about Createmytatoo.com, a website that may provide her with a tattoo design that better matches her vision. The document describes Debra's journey to find a tattoo artist that could bring her custom sketch to life in a way she would be happy with.
Report
Share
Report
Share
Recommended
6. the production process of the band’s logo
The document discusses the creation of a logo for a band called Invoke. Various fonts were tried before settling on the Riven font. The band's name Invoke is used as the logo, written in the Riven font, without additional design elements. Riven is described as an old-style serif font that is commonly used for rock band logos and is well-suited for the simple and attractive logo design. Different color combinations and backgrounds were tested before finalizing the logo design.
The production process of the band’s logo
The document discusses the creation of a logo for a band called Invoke. Various fonts were tried before settling on the font Riven. Riven was used to write the band's name in the logo, with no additional design elements. As the band also has a record label called Invoke, both logos ended up being quite similar. Riven is described as an old-style serif font that is commonly used for rock band logos due to its simple yet attractive appearance. The logo was kept purely textual rather than including artwork in order to maintain a clean, simple style.
class presentation
The document discusses the design choices made for the features page of a magazine. Fonts were selected to distinguish the questions from the artist's answers and keep the page from looking too busy. Pictures of the artist were taken against various backgrounds to seem edgy and posed in a non-typical way. Colors like black, white and dark purple were used throughout for contrast, to represent the rock image, and create a brand identity since purple is not a common magazine color.
Conventions and analysing
This document discusses conventions for magazine front covers, contents pages, and double page spreads. It analyzes examples from Vibe, Blender, Q, and Top of the Pops magazines. Key points made include liking the simplicity and color choices of Vibe and Blender covers, as well as Q's elegant contents page with few pictures. Examples of double page spreads show interviews and photos following conventions like credits, columns, and quotes. Overall the document examines magazine design elements to help create a professional student magazine.
John quintero
The blog post introduces third grade students to the main places in their city of Medellín through activities that allow them to identify locations, match words and images, unscramble place names, and label pictures. The goal is for students to become familiar with the key sites in their hometown through interactive exercises featuring images and names of places provided by their teacher.
Masthead Evaluation
The author has chosen the title "Encounter" for their indie rock magazine because it suggests unexpected musical discoveries. They selected fonts like "Edo SZ" and "Whisky Lickers" that reflect the genre. After evaluating different styles, "Edo SZ" stood out as clear, readable, and fitting for the magazine's masthead. The author will design the final masthead using "Edo SZ" in Photoshop to represent their new indie publication.
Zaragoza turismo 204
La Feria del Libro de Zaragoza se celebrará del 31 de mayo al 9 de junio en la Plaza de Aragón, con presentaciones, debates y firmas de libros con los mejores autores. El 28 de mayo, la Orquesta Sinfónica del Estado de Moscú ofrecerá un concierto en el Auditorio de Zaragoza. La banda británica The Barracudas actuará el 1 de junio en la Sala López con sus éxitos de rock garage y surf punk de las décadas de 1960 y 1970.
Design of 17-Bit Audio Band Delta-Sigma Analog to Digital Converter
• Systematically designed a delta sigma ADC with CIFF modular architecture in MATLAB Simulink with an ENOB of 19-bits.
• Designed a decimation filter to remove noise in the digital output of the delta sigma modulator.
• Observed the effect of non-idealities on the modulator such as finite gain, finite bandwidth, slew rate, analog noise and capacitor mismatch.
Recommended
6. the production process of the band’s logo
The document discusses the creation of a logo for a band called Invoke. Various fonts were tried before settling on the Riven font. The band's name Invoke is used as the logo, written in the Riven font, without additional design elements. Riven is described as an old-style serif font that is commonly used for rock band logos and is well-suited for the simple and attractive logo design. Different color combinations and backgrounds were tested before finalizing the logo design.
The production process of the band’s logo
The document discusses the creation of a logo for a band called Invoke. Various fonts were tried before settling on the font Riven. Riven was used to write the band's name in the logo, with no additional design elements. As the band also has a record label called Invoke, both logos ended up being quite similar. Riven is described as an old-style serif font that is commonly used for rock band logos due to its simple yet attractive appearance. The logo was kept purely textual rather than including artwork in order to maintain a clean, simple style.
class presentation
The document discusses the design choices made for the features page of a magazine. Fonts were selected to distinguish the questions from the artist's answers and keep the page from looking too busy. Pictures of the artist were taken against various backgrounds to seem edgy and posed in a non-typical way. Colors like black, white and dark purple were used throughout for contrast, to represent the rock image, and create a brand identity since purple is not a common magazine color.
Conventions and analysing
This document discusses conventions for magazine front covers, contents pages, and double page spreads. It analyzes examples from Vibe, Blender, Q, and Top of the Pops magazines. Key points made include liking the simplicity and color choices of Vibe and Blender covers, as well as Q's elegant contents page with few pictures. Examples of double page spreads show interviews and photos following conventions like credits, columns, and quotes. Overall the document examines magazine design elements to help create a professional student magazine.
John quintero
The blog post introduces third grade students to the main places in their city of Medellín through activities that allow them to identify locations, match words and images, unscramble place names, and label pictures. The goal is for students to become familiar with the key sites in their hometown through interactive exercises featuring images and names of places provided by their teacher.
Masthead Evaluation
The author has chosen the title "Encounter" for their indie rock magazine because it suggests unexpected musical discoveries. They selected fonts like "Edo SZ" and "Whisky Lickers" that reflect the genre. After evaluating different styles, "Edo SZ" stood out as clear, readable, and fitting for the magazine's masthead. The author will design the final masthead using "Edo SZ" in Photoshop to represent their new indie publication.
Zaragoza turismo 204
La Feria del Libro de Zaragoza se celebrará del 31 de mayo al 9 de junio en la Plaza de Aragón, con presentaciones, debates y firmas de libros con los mejores autores. El 28 de mayo, la Orquesta Sinfónica del Estado de Moscú ofrecerá un concierto en el Auditorio de Zaragoza. La banda británica The Barracudas actuará el 1 de junio en la Sala López con sus éxitos de rock garage y surf punk de las décadas de 1960 y 1970.
Design of 17-Bit Audio Band Delta-Sigma Analog to Digital Converter
• Systematically designed a delta sigma ADC with CIFF modular architecture in MATLAB Simulink with an ENOB of 19-bits.
• Designed a decimation filter to remove noise in the digital output of the delta sigma modulator.
• Observed the effect of non-idealities on the modulator such as finite gain, finite bandwidth, slew rate, analog noise and capacitor mismatch.
GG Films-Updated Storyboard
The document summarizes the origins and evolution of the term "hashtag". It begins by introducing the setting of the "Word Facts Tower" where the Word Facts Investigator declares they will research the word "hashtag". It then discusses how the symbol now known as a hashtag originated from the Latin sign for "pound by weight" and was previously called the "pound sign" or "number sign". It also mentions how in the early 1900s, the term "hash mark" was used by military officers to refer to service stripes on uniforms. Finally, it notes how the term "hash" became widely used in the 1960s to refer to the symbol, and how computer programmers adopted it in the 1980s, leading to hashtags becoming
CMT-Updated Storyboard
The document discusses a service that allows customers to crowdsource tattoo designs from over 22,000 artists. For a butterfly tattoo, the customer's design request would be put to the artists to submit competing designs. The customer then selects the best design and avoids regretting a design chosen solely by the tattoo artist. The service aims to give customers control over their permanent tattoo design.
Ao Docs-Updated Storyboard
AODocs allows organizations to implement document management regulations and business processes within Google Drive to control document sharing and growth. It combines Google Drive's ease of use and accessibility with enterprise-grade features like customizable views, workflows and integration with other applications. AODocs also facilitates importing documents from other systems and accessing Office files directly from Drive. More than 1 million users globally leverage AODocs to securely collaborate on Drive while building cost-effective business applications.
Project presentation
1) The document describes a project to modulate an audio signal onto a LED by varying the current through the LED.
2) The authors designed a summing amplifier circuit to modulate the audio signal onto the LED current and analyzed the input, modulated, and transmitted signals.
3) Their results showed they were successfully able to modulate the audio signal and transmit it across the LED, though the transmitted signal strength was low which could be addressed with a current amplifier.
Feliz cumpleaños nenito
Este documento es una felicitación de cumpleaños para Ricardo Larrea Fernández. Le desea que los años no pasen en vano y que logre grandes metas a través de trabajo duro. También valora la amistad verdadera y los momentos en familia. Le desea que Dios lo bendiga y que triunfe tanto en lo profesional como personal siendo un hombre de bien.
Ece523 folded cascode design
• Designed a single stage folded cascode op-amp which had atleast 50 dB gain and 135 MHz Unity Gain Bandwidth for the three temperature corners (typical, slow and fast), in Cadence.
• The op-amp had a phase margin of atleast 64º and an output swing of atleast 1.46 V for the temperature corners (27,-40,100).
• Designed a common mode feedback for the amplifier and achieved a common mode accuracy of 0.01 V.
Digital Voltmeter displaying voltage level on a seven segment display and com...
• Coded an Altera FPGA board in System Verilog such that it could use the on board ADC to convert the voltage signal into a digital signal, that was displayed on a seven segment display as well as on a computer screen.
• Utilized a UART (USB to serial) to receive the voltage signal that was to be displayed on a computer.
• Controlled the selection of channel for analog input by transmitting the serial data through the UART from the computer keyboard.
Ece593 project1 chien_chun_yao_and_karthikvel_rathinavel
• Designed a Wilkinson Combiner at 30 GHz using microstrip transmission line and then at 60 GHz using coplanar waveguide.
• Simulated the Layout of the testbench using the EM Simulator at RF.
ECE 626 project report Switched Capacitor
Designed a Switched Capacitor Low Pass Filter with a sampling frequency of 60 Hz.
Simulated the filter to have a ripple within 0.2 dB under 3.6 MHz and a stopband attenuation of atleast -51 dB after 7.2 MHz.
Applied dynamic range optimization, Dynamic Range Scaling and Chip Area scaling to get maximum output swing while occupying minimum area on chip.
Tested the filter with non-idealities of the amplifier, such as finite gain, bandwidth, offset voltage, charge injection, etc.
Transmitting Digital Signal through Light Pulses
1. The document describes a project that transmits digital signals through light pulses using LEDs and photodiodes. A microcontroller generates pulses that drive an LED, transmitting the signal through light. A photodiode receives the light and the microcontroller interprets and plots the signal.
2. The transmitter code generates pulses by alternating the output pin between high and low with delays. The receiver reads the photodiode voltage and sends it to a computer to plot the square wave signal graphically, showing accurate signal transmission.
3. Testing without the LED showed noise in the receiver between 1.28-1.32 volts, demonstrating the need for an optical signal to transmit data distinctly.
Ece 523 project – fully differential two stage telescopic op amp
• Designed a two stage op-amp with first stage as a telescopic amplifier and second stage being a common source, in Cadence.
• Simulated the loop characteristics of the amplifier to have atleast 100 MHz Unity Gain Bandwidth, 65 dB gain and 60º phase margin (both differential loop and Common Mode) for three temperature (27,-40,100) corners.
• Extracted the layout of the design in Virtuoso (after passing DRC an LVS) and simulated the differential loop performances of the extracted netlist.
• Designed a third order Butterworth filter with 100 KHz corner frequency using the op-amp.
Project Report
1) The document describes a project using an audio signal to modulate the intensity of an LED. A summing amplifier combines the audio signal with a bias voltage to vary the LED's brightness accordingly.
2) Light from the LED falls on a phototransistor, which amplifies the signal. With headphones, the transmitted audio could be heard clearly, demonstrating successful wireless transmission.
3) While proof-of-concept was achieved, the document discusses using lasers and fiber optics to transmit signals over greater distances with higher information content.
Sine Wave Generator with controllable frequency displayed on a seven segment ...
• Designed a Sine Wave Generator Hardware, whose frequency could be controlled using a quadrature encoder.
• Coded the FPGA board in System Verilog to display a count (going from 0 to 9999) on to a seven segment board. This count that was displayed, was same as the frequency of the sine wave generated.
• Incorporated a brightness control feature for all the digits being displayed. This was done by changing the duty cycle using a push button for the PWM control.
• Included an additional feature of increasing the count and the frequency by tens, hundreds or thousands, instead of increasing by just one.
Low Noise Amplifier at 2 GHz using the transistor NE85639 in ADS
• Systematically designed a LNA and its biasing using non-ideal components such as Microstrip TLs resistors, capacitors etc.
• Calculated the S parameters of the Transistor and simulated the gain and bandwidth to be 10 dB and 1 GHz respectively.
• Achieved a Noise Figure of 3.2 dB and s11 of -20 dB in the final design.
Two stage folded cascode op amp design in Cadence
Op-Amp with differential input differential output. Design approach is a two stage folded cascode with an open circuit gain of 94 dB.
Continuous Low Pass Filter Realization using Cascaded stages of Tow-Thomas Bi...
Designed a Continuous Low Pass Filter using three stages of cascaded Tow-Thomas Bi-quads which met the following specifications:-
Pass band: DC to fp = 20 kHz, gain between 0 dB & 1 dB.
Stop band: f > fs = 40 kHz, gain below -50 dB
Found the transfer function, poles and zeros of the required filter using MATLAB. Used Cadence to plot the frequency response of the gain of the overall transfer function using ideal op-amps and non-ideal op-amps.Used dynamic optimization and dynamic range scaling of the elements (resistors and capacitors) such that the output of each stage had a good output swing.
Differntial Input to Single Ended Output, Two stage Op-amp
This document summarizes a project to design a differential input, single ended output two-stage operational amplifier. The design approach was to bring all transistors into saturation at a common mode voltage of 0V and meet gain, phase margin, and unity gain frequency specifications. A compensation capacitor was increased to move the dominant pole in while a nulling resistor eliminated the effect of a zero, improving phase margin and unity gain frequency. Simulation results met all specifications, with an open loop gain of 67.97dB, phase margin of 75.3 degrees, and unity gain frequency of 15.29MHz. The input common mode range was -0.852V to 0.181V and output swing was -0.771V to 0
Loyalty Card-Updated storyboard
This document discusses how businesses can use mobile apps and loyalty programs to increase sales and retain customers. It outlines features of a mobile app platform that allows businesses to create digital loyalty cards, prepaid packages, and payment options to engage customers anytime through their phones. The platform provides data tracking, customization, and marketing tools to help businesses run promotions, manage inventory, and stay connected to customers through social media and location-based features. The solution aims to help small businesses grow their customer base, sales, and revenues with a cost-effective monthly subscription model.
Security System-Updated Storyboard
The system works by placing a camera sensor in the area to be protected. When an alarm is triggered by an intruder entering the area, the sensor will trigger the alarm and the camera will begin recording and transmitting video to a 24 hour monitoring station. The monitoring station will then contact the user and send the video directly to their phone or computer so they can take appropriate action. The system can begin protecting an area within minutes without needing any wiring or tools.
Loyalty Card-Updated Storyboard
This document discusses how businesses can use mobile apps and loyalty programs to increase sales and retain customers. It outlines features of potential mobile app solutions like eLoyalty, ePackage, and ePursez that allow businesses to create digital loyalty programs, prepaid packages, and credit systems. These solutions help businesses collect customer data, securely manage transactions, and provide a flexible way to promote their business through features like online storefronts and social media integration. The document suggests these mobile solutions can help businesses secure future sales at a low cost compared to traditional advertising and paper-based programs.
1loyalty card-Storyboard
A business survives through sales, but even good products and services don't always boost sales. For small-to-medium businesses, retaining loyal customers and repeat sales is the top priority. Traditional loyalty cards are simple and proven to earn more business for less than advertising, but they lack flexibility, control, and the ability to track customer data. A mobile loyalty card app provides a digital solution that allows businesses to develop and manage loyalty programs without programming, retaining existing customers and attracting new ones to significantly increase sales.
4Loyaltycard-EpursezStoryboard
This document describes the features of ePursez mobile payment tabs, including launching pre-paid tabs instantly, reloading eDollars, collecting and managing customer data in real-time through cloud backup, enabling accurate, secure, and trackable transactions. It also mentions creating an online marketplace, customizing product photos and descriptions, setting delivery and tax fees, streamlining management and payments, using GPS tabs to direct customers, allowing click-to-call on multiple numbers, and sharing via social media through tell-a-friend functionality.
More Related Content
Viewers also liked
GG Films-Updated Storyboard
The document summarizes the origins and evolution of the term "hashtag". It begins by introducing the setting of the "Word Facts Tower" where the Word Facts Investigator declares they will research the word "hashtag". It then discusses how the symbol now known as a hashtag originated from the Latin sign for "pound by weight" and was previously called the "pound sign" or "number sign". It also mentions how in the early 1900s, the term "hash mark" was used by military officers to refer to service stripes on uniforms. Finally, it notes how the term "hash" became widely used in the 1960s to refer to the symbol, and how computer programmers adopted it in the 1980s, leading to hashtags becoming
CMT-Updated Storyboard
The document discusses a service that allows customers to crowdsource tattoo designs from over 22,000 artists. For a butterfly tattoo, the customer's design request would be put to the artists to submit competing designs. The customer then selects the best design and avoids regretting a design chosen solely by the tattoo artist. The service aims to give customers control over their permanent tattoo design.
Ao Docs-Updated Storyboard
AODocs allows organizations to implement document management regulations and business processes within Google Drive to control document sharing and growth. It combines Google Drive's ease of use and accessibility with enterprise-grade features like customizable views, workflows and integration with other applications. AODocs also facilitates importing documents from other systems and accessing Office files directly from Drive. More than 1 million users globally leverage AODocs to securely collaborate on Drive while building cost-effective business applications.
Project presentation
1) The document describes a project to modulate an audio signal onto a LED by varying the current through the LED.
2) The authors designed a summing amplifier circuit to modulate the audio signal onto the LED current and analyzed the input, modulated, and transmitted signals.
3) Their results showed they were successfully able to modulate the audio signal and transmit it across the LED, though the transmitted signal strength was low which could be addressed with a current amplifier.
Feliz cumpleaños nenito
Este documento es una felicitación de cumpleaños para Ricardo Larrea Fernández. Le desea que los años no pasen en vano y que logre grandes metas a través de trabajo duro. También valora la amistad verdadera y los momentos en familia. Le desea que Dios lo bendiga y que triunfe tanto en lo profesional como personal siendo un hombre de bien.
Ece523 folded cascode design
• Designed a single stage folded cascode op-amp which had atleast 50 dB gain and 135 MHz Unity Gain Bandwidth for the three temperature corners (typical, slow and fast), in Cadence.
• The op-amp had a phase margin of atleast 64º and an output swing of atleast 1.46 V for the temperature corners (27,-40,100).
• Designed a common mode feedback for the amplifier and achieved a common mode accuracy of 0.01 V.
Digital Voltmeter displaying voltage level on a seven segment display and com...
• Coded an Altera FPGA board in System Verilog such that it could use the on board ADC to convert the voltage signal into a digital signal, that was displayed on a seven segment display as well as on a computer screen.
• Utilized a UART (USB to serial) to receive the voltage signal that was to be displayed on a computer.
• Controlled the selection of channel for analog input by transmitting the serial data through the UART from the computer keyboard.
Ece593 project1 chien_chun_yao_and_karthikvel_rathinavel
• Designed a Wilkinson Combiner at 30 GHz using microstrip transmission line and then at 60 GHz using coplanar waveguide.
• Simulated the Layout of the testbench using the EM Simulator at RF.
ECE 626 project report Switched Capacitor
Designed a Switched Capacitor Low Pass Filter with a sampling frequency of 60 Hz.
Simulated the filter to have a ripple within 0.2 dB under 3.6 MHz and a stopband attenuation of atleast -51 dB after 7.2 MHz.
Applied dynamic range optimization, Dynamic Range Scaling and Chip Area scaling to get maximum output swing while occupying minimum area on chip.
Tested the filter with non-idealities of the amplifier, such as finite gain, bandwidth, offset voltage, charge injection, etc.
Transmitting Digital Signal through Light Pulses
1. The document describes a project that transmits digital signals through light pulses using LEDs and photodiodes. A microcontroller generates pulses that drive an LED, transmitting the signal through light. A photodiode receives the light and the microcontroller interprets and plots the signal.
2. The transmitter code generates pulses by alternating the output pin between high and low with delays. The receiver reads the photodiode voltage and sends it to a computer to plot the square wave signal graphically, showing accurate signal transmission.
3. Testing without the LED showed noise in the receiver between 1.28-1.32 volts, demonstrating the need for an optical signal to transmit data distinctly.
Ece 523 project – fully differential two stage telescopic op amp
• Designed a two stage op-amp with first stage as a telescopic amplifier and second stage being a common source, in Cadence.
• Simulated the loop characteristics of the amplifier to have atleast 100 MHz Unity Gain Bandwidth, 65 dB gain and 60º phase margin (both differential loop and Common Mode) for three temperature (27,-40,100) corners.
• Extracted the layout of the design in Virtuoso (after passing DRC an LVS) and simulated the differential loop performances of the extracted netlist.
• Designed a third order Butterworth filter with 100 KHz corner frequency using the op-amp.
Project Report
1) The document describes a project using an audio signal to modulate the intensity of an LED. A summing amplifier combines the audio signal with a bias voltage to vary the LED's brightness accordingly.
2) Light from the LED falls on a phototransistor, which amplifies the signal. With headphones, the transmitted audio could be heard clearly, demonstrating successful wireless transmission.
3) While proof-of-concept was achieved, the document discusses using lasers and fiber optics to transmit signals over greater distances with higher information content.
Sine Wave Generator with controllable frequency displayed on a seven segment ...
• Designed a Sine Wave Generator Hardware, whose frequency could be controlled using a quadrature encoder.
• Coded the FPGA board in System Verilog to display a count (going from 0 to 9999) on to a seven segment board. This count that was displayed, was same as the frequency of the sine wave generated.
• Incorporated a brightness control feature for all the digits being displayed. This was done by changing the duty cycle using a push button for the PWM control.
• Included an additional feature of increasing the count and the frequency by tens, hundreds or thousands, instead of increasing by just one.
Low Noise Amplifier at 2 GHz using the transistor NE85639 in ADS
• Systematically designed a LNA and its biasing using non-ideal components such as Microstrip TLs resistors, capacitors etc.
• Calculated the S parameters of the Transistor and simulated the gain and bandwidth to be 10 dB and 1 GHz respectively.
• Achieved a Noise Figure of 3.2 dB and s11 of -20 dB in the final design.
Two stage folded cascode op amp design in Cadence
Op-Amp with differential input differential output. Design approach is a two stage folded cascode with an open circuit gain of 94 dB.
Continuous Low Pass Filter Realization using Cascaded stages of Tow-Thomas Bi...
Designed a Continuous Low Pass Filter using three stages of cascaded Tow-Thomas Bi-quads which met the following specifications:-
Pass band: DC to fp = 20 kHz, gain between 0 dB & 1 dB.
Stop band: f > fs = 40 kHz, gain below -50 dB
Found the transfer function, poles and zeros of the required filter using MATLAB. Used Cadence to plot the frequency response of the gain of the overall transfer function using ideal op-amps and non-ideal op-amps.Used dynamic optimization and dynamic range scaling of the elements (resistors and capacitors) such that the output of each stage had a good output swing.
Differntial Input to Single Ended Output, Two stage Op-amp
This document summarizes a project to design a differential input, single ended output two-stage operational amplifier. The design approach was to bring all transistors into saturation at a common mode voltage of 0V and meet gain, phase margin, and unity gain frequency specifications. A compensation capacitor was increased to move the dominant pole in while a nulling resistor eliminated the effect of a zero, improving phase margin and unity gain frequency. Simulation results met all specifications, with an open loop gain of 67.97dB, phase margin of 75.3 degrees, and unity gain frequency of 15.29MHz. The input common mode range was -0.852V to 0.181V and output swing was -0.771V to 0
Viewers also liked (17)
Digital Voltmeter displaying voltage level on a seven segment display and com...
Digital Voltmeter displaying voltage level on a seven segment display and com...
Ece593 project1 chien_chun_yao_and_karthikvel_rathinavel
Ece593 project1 chien_chun_yao_and_karthikvel_rathinavel
Ece 523 project – fully differential two stage telescopic op amp
Ece 523 project – fully differential two stage telescopic op amp
Sine Wave Generator with controllable frequency displayed on a seven segment ...
Sine Wave Generator with controllable frequency displayed on a seven segment ...
Low Noise Amplifier at 2 GHz using the transistor NE85639 in ADS
Low Noise Amplifier at 2 GHz using the transistor NE85639 in ADS
Continuous Low Pass Filter Realization using Cascaded stages of Tow-Thomas Bi...
Continuous Low Pass Filter Realization using Cascaded stages of Tow-Thomas Bi...
Differntial Input to Single Ended Output, Two stage Op-amp
Differntial Input to Single Ended Output, Two stage Op-amp
More from ariasollylabs
Loyalty Card-Updated storyboard
This document discusses how businesses can use mobile apps and loyalty programs to increase sales and retain customers. It outlines features of a mobile app platform that allows businesses to create digital loyalty cards, prepaid packages, and payment options to engage customers anytime through their phones. The platform provides data tracking, customization, and marketing tools to help businesses run promotions, manage inventory, and stay connected to customers through social media and location-based features. The solution aims to help small businesses grow their customer base, sales, and revenues with a cost-effective monthly subscription model.
Security System-Updated Storyboard
The system works by placing a camera sensor in the area to be protected. When an alarm is triggered by an intruder entering the area, the sensor will trigger the alarm and the camera will begin recording and transmitting video to a 24 hour monitoring station. The monitoring station will then contact the user and send the video directly to their phone or computer so they can take appropriate action. The system can begin protecting an area within minutes without needing any wiring or tools.
Loyalty Card-Updated Storyboard
This document discusses how businesses can use mobile apps and loyalty programs to increase sales and retain customers. It outlines features of potential mobile app solutions like eLoyalty, ePackage, and ePursez that allow businesses to create digital loyalty programs, prepaid packages, and credit systems. These solutions help businesses collect customer data, securely manage transactions, and provide a flexible way to promote their business through features like online storefronts and social media integration. The document suggests these mobile solutions can help businesses secure future sales at a low cost compared to traditional advertising and paper-based programs.
1loyalty card-Storyboard
A business survives through sales, but even good products and services don't always boost sales. For small-to-medium businesses, retaining loyal customers and repeat sales is the top priority. Traditional loyalty cards are simple and proven to earn more business for less than advertising, but they lack flexibility, control, and the ability to track customer data. A mobile loyalty card app provides a digital solution that allows businesses to develop and manage loyalty programs without programming, retaining existing customers and attracting new ones to significantly increase sales.
4Loyaltycard-EpursezStoryboard
This document describes the features of ePursez mobile payment tabs, including launching pre-paid tabs instantly, reloading eDollars, collecting and managing customer data in real-time through cloud backup, enabling accurate, secure, and trackable transactions. It also mentions creating an online marketplace, customizing product photos and descriptions, setting delivery and tax fees, streamlining management and payments, using GPS tabs to direct customers, allowing click-to-call on multiple numbers, and sharing via social media through tell-a-friend functionality.
Ao docs-Revised Storyboard
AODocs allows organizations to implement document management regulations and business processes within Google Drive to control document sharing and growth. It combines Google Drive's ease of use and accessibility with enterprise-grade features like customizable views, workflows and integration with other applications. AODocs also facilitates importing documents from other systems and accessing documents from Drive as if they were local. More than 1 million users globally leverage AODocs for secure collaboration and building apps on the Google Drive platform.
Flynk-Updated Storyboard
Alisha is concerned about her son's late school bus and her daughter's safety traveling alone. Her husband Chris wants to better connect with customers across geographies. Their friend Maya introduces them to the Flynk app, which allows location tracking, mapping customers, and connecting with friends. It allows Alisha to know when her son's bus arrives, and lets her and Chris track their daughter's location when traveling. Chris can also track customers on the go. Flynk provides these features while maintaining user privacy and control over data.
Security System-First draft of storyboard
The system works by placing a camera sensor in the area to be protected. When an alarm code is entered into the keypad and the area is left, the sensor will trigger an alarm if a violator enters. The camera will then begin recording and transmitting video to a 24 hour monitoring station. This station will immediately contact the owner and send the video of the intrusion directly to their phone or computer so they can take appropriate action. The system can begin protecting an area within minutes without needing any wiring or tools.
Markono-Updated Storyboard
Bob is a publisher who believes bulk printing will reduce production costs. However, he does not realize that when supply exceeds demand and inventory becomes obsolete, it significantly impacts the bottom line. Studies show over 30% of printed books are eventually pulped, wasting millions in inventory, storage, and holding costs. But Bob's friend Jim introduces him to Markono's print-on-demand capability, which connects directly to ordering systems and automatically prints books as orders are placed, avoiding wasted inventory issues.
Ao Docs-Updated Storyboard
AODocs allows organizations to implement document management regulations and business processes within Google Drive to control document sharing and growth. It combines Google Drive's ease of use and accessibility with enterprise-grade features like customizable views, workflows and integration with other applications. AODocs also facilitates importing documents from other systems and accessing Office files directly from Drive. More than 1 million users globally leverage AODocs to securely collaborate on Drive while building cost-effective business applications.
More from ariasollylabs (10)
Recently uploaded
Game Concept Presentation for Ukrainian Mythology Based Game With Designs
The Game Concept created as a Final Project piece for college. Creative Media year 2 student
UNIT IV-VISUAL STYLE AND MOBILE INTERFACES.pptx
Visual Style and Aesthetics: Basics of Visual Design
Visual Design for Enterprise Applications
Range of Visual Styles.
Mobile Interfaces:
Challenges and Opportunities of Mobile Design
Approach to Mobile Design
Patterns
一比一原版(UW毕业证)西雅图华盛顿大学毕业证如何办理
UW毕业证学历书【微信95270640】做UW文凭、办UW文凭、买UW文凭Q微信95270640买办国外文凭UW毕业证买学历咨询/代办美国毕业证成绩单文凭、办澳洲文凭毕业证、办加拿大大学毕业证文凭英国毕业证学历认证-毕业证文凭成绩单、假文凭假毕业证假学历书制作仿制、改成绩、教育部学历学位认证、毕业证、成绩单、文 凭、UW学历文凭、UW假学位证书、毕业证文凭、、文凭毕业证、毕业证认证、留服认证、使馆认证、使馆证明 、使馆留学回国人员证明、留学生认证、学历认证、文凭认证、学位认证
(诚招代理)办理国外高校毕业证成绩单文凭学位证,真实使馆公证（留学回国人员证明）真实留信网认证国外学历学位认证雅思代考国外学校代申请名校保录开请假条改GPA改成绩ID卡
1.高仿业务:【本科硕士】毕业证,成绩单（GPA修改）,学历认证（教育部认证）,大学Offer,,ID,留信认证,使馆认证,雅思,语言证书等高仿类证书；
2.认证服务: 学历认证（教育部认证）,大使馆认证（回国人员证明）,留信认证（可查有编号证书）,大学保录取,雅思保分成绩单。
3.技术服务：钢印水印烫金激光防伪凹凸版设计印刷激凸温感光标底纹镭射速度快。
办理西雅图华盛顿大学西雅图华盛顿大学毕业证假文凭流程：
1客户提供办理信息：姓名生日专业学位毕业时间等（如信息不确定可以咨询顾问：我们有专业老师帮你查询）；
2开始安排制作毕业证成绩单电子图；
3毕业证成绩单电子版做好以后发送给您确认；
4毕业证成绩单电子版您确认信息无误之后安排制作成品；
5成品做好拍照或者视频给您确认；
6快递给客户（国内顺丰国外DHLUPS等快读邮寄）
-办理真实使馆公证（即留学回国人员证明）
-办理各国各大学文凭（世界名校一对一专业服务,可全程监控跟踪进度）
-全套服务：毕业证成绩单真实使馆公证真实教育部认证。让您回国发展信心十足！
（详情请加一下 文凭顾问+微信:95270640）欢迎咨询！实伙伴平时山娃上学阿黑也摇头晃脑地跟去暑假用不着上学阿黑更是天天围着山娃转山娃上山除了察看埋下的野兽铁夹子看护早上逐上山的大黄牛外也觅着采草药摘红菇积攒起来拿到镇上卖山娃知道母亲身体不好家里盖新房也欠了不少钱总想趁假期赚点钱在校寄宿时用不着老向爷爷奶奶要盛夏的乡村仍旧清凉清清爽爽的山娃也过得自由自在不知为啥山娃总情不自禁地思念起城里的父亲每年暑假瞅见远乡近邻的小伙伴都争先恐后地往城里跑山娃就更思片
Connect Conference 2022: Passive House - Economic and Environmental Solution...
Passive House: The Economic and Environmental Solution for Sustainable Real Estate. Lecture by Tim Eian of TE Studio Passive House Design in November 2022 in Minneapolis.
- The Built Environment
- Let's imagine the perfect building
- The Passive House standard
- Why Passive House targets
- Clean Energy Plans?!
- How does Passive House compare and fit in?
- The business case for Passive House real estate
- Tools to quantify the value of Passive House
- What can I do?
- Resources
Timeless Principles of Good Design
Timeless Principles of Good Design from my 2015 Presentation at TYPO SF
UNIT V ACTIONS AND COMMANDS, FORMS AND CONTROLS.pptx
Actions and Commands:
Tap, Swipe, and Pinch
Rotate and Shake -Buttons -Menu Bars – Menus
Toolbars - Links- Action Panels
Hover Tools - Keyboard Actions- Drag-and-Drop
Typed Commands-Affordance-Direct Manipulation.
Forms and Controls:
Basics of Form Design
Patterns.
Divertidamente SLIDE.pptxufururururuhrurid8dj
Hsuehebvdhdueuw8wiiwieih3udud8e8wisbdydvw7wbidj38ehehdheuwjhdiwjwieheheueurhryrurhrgryd7eueue
Storytelling For The Web: Integrate Storytelling in your Design Process
In this slides I explain how I have used storytelling techniques to elevate websites and brands and create memorable user experiences. You can discover practical tips as I showcase the elements of good storytelling and its applied to some examples of diverse brands/projects..
SECURING BUILDING PERMIT CITY OF CALOOCAN.pdf
How to apply for building permit in the city of Caloocan?
What is a building permit?
Who applies for building permit?
Maximize Your Content with Beautiful Assets : Content & Asset for Landing Page
Figma is a cloud-based design tool widely used by designers for prototyping, UI/UX design, and real-time collaboration. With features such as precision pen tools, grid system, and reusable components, Figma makes it easy for teams to work together on design projects. Its flexibility and accessibility make Figma a top choice in the digital age.
Practical eLearning Makeovers for Everyone
Welcome to Practical eLearning Makeovers for Everyone. In this presentation, we’ll take a look at a bunch of easy-to-use visual design tips and tricks. And we’ll do this by using them to spruce up some eLearning screens that are in dire need of a new look.
定制美国西雅图城市大学毕业证学历证书原版一模一样
原版一模一样【微信：741003700 】【美国西雅图城市大学毕业证学历证书】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Top Interior Designers in Bangalore.pdf1
Decormart Studio is widely recognized as one of the best interior designers in Bangalore, known for their exceptional design expertise and ability to create stunning, functional spaces. With a strong focus on client preferences and timely project delivery, Decormart Studio has built a solid reputation for their innovative and personalized approach to interior design.
Graphic Design Tools and Software .pptx
Explore the essential graphic design tools and software that can elevate your creative projects. Discover industry favorites and innovative solutions for stunning design results.
一比一原版(Columbia毕业证)哥伦比亚大学毕业证如何办理
Columbia毕业证offer【微信95270640】☀《哥伦比亚大学毕业证购买》Q微信95270640《Columbia毕业证文凭补》文凭、本科、硕士、研究生学历都可以做,留信认证的作用：
1：该专业认证可证明留学生真实留学身份。
2：同时对留学生所学专业等级给予评定。
3：国家专业人才认证中心颁发入库证书
4：这个入网证书并且可以归档到地方
5：凡是获得留信网入网的信息将会逐步更新到个人身份内，将在网内查询个人身份证信息后，同步读取人才网入库信息。
6：个人职称评审加20分。
7：个人信誉贷款加10分。
8：在国家人才网主办的全国网络招聘大会中纳入资料，供国家500强等高端企业选择人才《文凭Columbia毕业证书原版制作Columbia成绩单》仿制Columbia毕业证成绩单哥伦比亚大学学位证书pdf电子图》。
办国外哥伦比亚大学哥伦比亚大学毕业证录取书教育部学历学位认证留信认证大使馆认证留学回国人员证明修改成绩单信封申请学校offer录取通知书在读证明offer letter。
快速办理高仿国外毕业证成绩单：
1哥伦比亚大学毕业证+成绩单+留学回国人员证明+教育部学历认证（全套留学回国必备证明材料给父母及亲朋好友一份完美交代）;
2雅思成绩单托福成绩单OFFER在读证明等留学相关材料（申请学校转学甚至是申请工签都可以用到）。
3.毕业证 #成绩单等全套材料从防伪到印刷从水印到钢印烫金高精仿度跟学校原版100%相同。
专业服务请勿犹豫联系我！联系人微信号：95270640诚招代理：本公司诚聘当地代理人员如果你有业余时间有兴趣就请联系我们。
国外哥伦比亚大学哥伦比亚大学毕业证录取书办理过程：
1客户提供办理信息：姓名生日专业学位毕业时间等（如信息不确定可以咨询顾问：我们有专业老师帮你查询）；
2开始安排制作毕业证成绩单电子图；
3毕业证成绩单电子版做好以后发送给您确认；
4毕业证成绩单电子版您确认信息无误之后安排制作成品；
5成品做好拍照或者视频给您确认；
6快递给客户（国内顺丰国外DHLUPS等快读邮寄）。我们的亲人生我养我的父母您们的年迈的苍老换来了我们新一代的新鲜与活力无论我们在哪里父母对我们的爱和思念为我们的生命增加了光彩给予我们自由追求的力量生活的力量我们也不忘感恩正因为这股感恩的线牵着我们使我们在一年的结束时刻义无反顾的踏上了回家的旅途人们常说父母恩最难回报愿我能以当年爸爸妈妈对待小时候的我们那样耐心温柔地对待我将渐渐老去的父母体谅他们以反哺之心奉敬父母以感恩之心孝顺父母哪怕只为父母换洗的
PDF SubmissionDigital Marketing Institute in Noida
https://www.safalta.com/online-digital-marketing/advance-digital-marketing-training-in-noidaTop Digital Marketing Institute in Noida: Boost Your Career Fast
[3:29 am, 30/05/2024] +91 83818 43552: Safalta Digital Marketing Institute in Noida also provides advanced classes for individuals seeking to develop their expertise and skills in this field. These classes, led by industry experts with vast experience, focus on specific aspects of digital marketing such as advanced SEO strategies, sophisticated content creation techniques, and data-driven analytics.
Impact of Fonts: in Web and Apps Design
Fonts play a crucial role in both User Interface (UI) and User Experience (UX) design. They affect readability, accessibility, aesthetics, and overall user perception.
Heuristics Evaluation - How to Guide.pdf
This guide helps identify potential issues related to navigation, clarity, consistency, and other factors that can affect user experience.
Recently uploaded (20)
Game Concept Presentation for Ukrainian Mythology Based Game With Designs
Game Concept Presentation for Ukrainian Mythology Based Game With Designs
Connect Conference 2022: Passive House - Economic and Environmental Solution...
Connect Conference 2022: Passive House - Economic and Environmental Solution...
UNIT V ACTIONS AND COMMANDS, FORMS AND CONTROLS.pptx
UNIT V ACTIONS AND COMMANDS, FORMS AND CONTROLS.pptx
Storytelling For The Web: Integrate Storytelling in your Design Process
Storytelling For The Web: Integrate Storytelling in your Design Process
Maximize Your Content with Beautiful Assets : Content & Asset for Landing Page
Maximize Your Content with Beautiful Assets : Content & Asset for Landing Page
PDF SubmissionDigital Marketing Institute in Noida
PDF SubmissionDigital Marketing Institute in Noida
CMT-Revised Storyboard
- 1. VO: Debra wanted to get, a tattoo. Note: Background appear and shop scale down to up and character come form outside.
- 2. VO: Many of her friends had them, but Debra wanted to make a statement with something unique. Note: her friend come from other side.
- 3. VO: She had an idea and made a little sketch to take to a local tattoo parlor. Note: thought bubble appear & tattoo and paper appear in character of hand.
- 4. VO: The tattoo artist worked with her design, Note: Create design of tattoo by machine.
- 5. VO: but it wasn’t anything like she expected. Note: Excretions change sad face
- 6. VO:- Three tattoo parlors later, Note:- Shops scale down to up and character come from left side.
- 7. VO:- Debra wanted to give up… until she heard about Note:- character come from left to right and standing.
- 8. VO:- Createmytatoo.com Note:- Logo appears and text type according to VO.