Group 1 presented their civil engineering project which involved designing roads, stormwater, sewer, and water networks for a site. They outlined the individual responsibilities of group members and the scope of inserting all civil services. They discussed the design standards used, constraints such as using Civil Designer software and time constraints due to student protests. The group confirmed they produced the required deliverables which included plans and longitudinal sections for stormwater, sewer, and roads designs.

1. Civil Engineering Project
Presentation
Group 1
2 November 2015

2. Contents
• Group introduction including individual responsibilities.
• Project scope
• Design standards used
• Constraints and challenges relating to the design.
• Deliverables produced (confirm that you did everything you were supposed to)

3. Group Members and Responsibilities
 Brendan Hein-Water Reticulation Design
 Fabrice Kamdem-Sewer Reticulation Design
 Jean v.dVyver- Roads Service Design
 Ali Ibrahim- Stormwater Design

4. Scope:
Insertion of All Civil Services
• Design the roads (vertical and horizontal alignment);
• Design the internal stormwater reticulation;
• Design a sewerage reticulation network;
• Design a water reticulation network.

5. Roads Design

6. Stormwater Design

7. Sewer Design

8. Water Reticulation Design

9. Design Standards Used
• Nelson Mandela

10. Constraints and Challenges Relating to the
Design
• Civil Designer software;
• Relating the theory case seen in class to practical case of design;
• Implementing the Guidelines;
• Time constraint due student protest.

11. Deliverables Produced
Stormwater layout Plan Sewer reticulation Layout Plan

12. Deliver Produced
Stormwater Longitudinal section Sewer Longitudinal Section

13. Deliver Produced
Roads Longitudinal & Cross-Section