Choice level glass mgo board
•
0 likes•11 views
Magnesium oxide fireproof boards are a building material made of magnesium oxide, magnesium chloride, and alkali glass fiber net. They are available in sizes from 1,220x2,440mm to 900x2,400mm and thicknesses from 3mm to 18mm. Magnesium oxide boards have outstanding fireproof performance due to their density, flexibility, durability, antisepsis, heat preservation, sound insulation, and environmental friendliness as they contain no asbestos. Beijing Hocreboard Building Materials Co.,Ltd manufactures and sells these boards.
Report
Share
Report
Share
Download to read offline
Recommended
ceramic fibers
This document discusses ceramic fibers, including their definition, properties, and applications. Ceramic fibers are inorganic, crystalline materials made from metal and non-metal compounds. They have properties like high compressive strength, good dimensional stability, and high melting points. Ceramic fibers are used in glass, ceramics, electronics, textiles, aerospace, and other industries due to their heat resistance, strength, and durability. Some key applications include armor, engine components, brake discs, insulation, and bulletproof vests.
Ceramic fibres
Ceramic fibers are high-temperature fibers made from alumina-silica materials. They offer properties like high-temperature stability, low thermal conductivity, thermal shock resistance, and light weight. The fibers are manufactured then used in applications like ceramic knife blades which won't corrode and retain their edge, brake discs which can be made of ceramic composites, bulletproof vests, and watch cases for their durability and scratch resistance.
High tech materials #SciChallenge2017
High-tech materials discusses carbon fiber, graphene, and magnesium alloys. Carbon fiber is strong, light, and resistant to heat and chemicals. It is made from polymers through carbonization and is used in vehicles, aircraft, and sports equipment to reduce weight. Graphene is the thinnest known material, with unprecedented strength and conductivity. It is being researched for applications in electronics, filtration, and composites. Magnesium alloys have high strength to weight ratios and are used in cameras, cars, sports gear, and aircraft to lower component weights. The document concludes that advanced materials have driven major technological advances and can be recycled to reduce resource usage.
Ceramic fibers
This document discusses ceramic fibers, including their production, properties, and uses. Ceramic fibers are man-made heat resistant fibers produced through direct or indirect processes involving precursor materials and high-temperature treatment. They have properties like high strength and thermal resistance at high temperatures. Common types include oxide and non-oxide fibers. Ceramic fibers are used as reinforcements in high-temperature composite materials and for thermal insulation and fire protection.
Ceramic ppt
The document summarizes information about silicon nitride and barium titanate ceramic materials. Silicon nitride has high strength and fracture toughness even at high temperatures, making it useful for applications like engines and bearings. It is also biocompatible and used in orthopedic implants. Barium titanate has a perovskite structure and exhibits ferroelectric and piezoelectric properties. It can be used in capacitors and transducers due to these properties. Both materials have potential medical applications and are generally biocompatible.
Carbon fiber
Carbon fiber is a thin strand composed mainly of carbon atoms that is very strong for its weight. It has high compressive strength, low weight, and resistance to heat and corrosion. Carbon fiber is used to reinforce composite materials and in applications that require strength at high temperatures, such as aircraft and cars. It is created through a process of spinning, stabilizing, carbonizing, and sizing acrylonitrile fibers. Carbon fiber has applications in alternative energy, fuel efficient vehicles, construction, and oil exploration due to its light weight and strength.
Ceramic fibres for composite applications
Ceramic fibres for composite applications are discussed. NEXTEL, NICALON, FIBRE FRAX, FIBRE FP and Silicon Nitride processing and properties are discussed. The polymer route to produce ceramic whiskers and fibres is also discussed.
The main content of zircon brick - zr o2
ZrO2 is the main oxide of zirconium, and it is a white crystalline which is difficult to dissolve in water, hydrochloric acid and dilute sulfuric acid. ZrO2 is an important material of refractory with the characteristics of high melting point, high resistance coefficient, high refractive index and low thermal expansion coefficient.
Recommended
ceramic fibers
This document discusses ceramic fibers, including their definition, properties, and applications. Ceramic fibers are inorganic, crystalline materials made from metal and non-metal compounds. They have properties like high compressive strength, good dimensional stability, and high melting points. Ceramic fibers are used in glass, ceramics, electronics, textiles, aerospace, and other industries due to their heat resistance, strength, and durability. Some key applications include armor, engine components, brake discs, insulation, and bulletproof vests.
Ceramic fibres
Ceramic fibers are high-temperature fibers made from alumina-silica materials. They offer properties like high-temperature stability, low thermal conductivity, thermal shock resistance, and light weight. The fibers are manufactured then used in applications like ceramic knife blades which won't corrode and retain their edge, brake discs which can be made of ceramic composites, bulletproof vests, and watch cases for their durability and scratch resistance.
High tech materials #SciChallenge2017
High-tech materials discusses carbon fiber, graphene, and magnesium alloys. Carbon fiber is strong, light, and resistant to heat and chemicals. It is made from polymers through carbonization and is used in vehicles, aircraft, and sports equipment to reduce weight. Graphene is the thinnest known material, with unprecedented strength and conductivity. It is being researched for applications in electronics, filtration, and composites. Magnesium alloys have high strength to weight ratios and are used in cameras, cars, sports gear, and aircraft to lower component weights. The document concludes that advanced materials have driven major technological advances and can be recycled to reduce resource usage.
Ceramic fibers
This document discusses ceramic fibers, including their production, properties, and uses. Ceramic fibers are man-made heat resistant fibers produced through direct or indirect processes involving precursor materials and high-temperature treatment. They have properties like high strength and thermal resistance at high temperatures. Common types include oxide and non-oxide fibers. Ceramic fibers are used as reinforcements in high-temperature composite materials and for thermal insulation and fire protection.
Ceramic ppt
The document summarizes information about silicon nitride and barium titanate ceramic materials. Silicon nitride has high strength and fracture toughness even at high temperatures, making it useful for applications like engines and bearings. It is also biocompatible and used in orthopedic implants. Barium titanate has a perovskite structure and exhibits ferroelectric and piezoelectric properties. It can be used in capacitors and transducers due to these properties. Both materials have potential medical applications and are generally biocompatible.
Carbon fiber
Carbon fiber is a thin strand composed mainly of carbon atoms that is very strong for its weight. It has high compressive strength, low weight, and resistance to heat and corrosion. Carbon fiber is used to reinforce composite materials and in applications that require strength at high temperatures, such as aircraft and cars. It is created through a process of spinning, stabilizing, carbonizing, and sizing acrylonitrile fibers. Carbon fiber has applications in alternative energy, fuel efficient vehicles, construction, and oil exploration due to its light weight and strength.
Ceramic fibres for composite applications
Ceramic fibres for composite applications are discussed. NEXTEL, NICALON, FIBRE FRAX, FIBRE FP and Silicon Nitride processing and properties are discussed. The polymer route to produce ceramic whiskers and fibres is also discussed.
The main content of zircon brick - zr o2
ZrO2 is the main oxide of zirconium, and it is a white crystalline which is difficult to dissolve in water, hydrochloric acid and dilute sulfuric acid. ZrO2 is an important material of refractory with the characteristics of high melting point, high resistance coefficient, high refractive index and low thermal expansion coefficient.
Manufacturing of honeycomb materials
The document discusses elastomers and reinforced plastics. It defines elastomers as polymers with elastic properties and describes common elastomers like natural rubber, synthetic rubbers, and thermoplastic elastomers. It also discusses the manufacturing processes for elastomers including polymerization, compounding, extrusion, molding, and curing. For reinforced plastics, it describes common reinforcing fibers like glass, carbon, and aramid fibers and the processes used to manufacture fiber reinforced plastics like resin transfer molding. It compares the advantages of fiber reinforced plastics to metals and discusses applications of these materials in Pakistan.
Glass Fibre
Glass fiber is a material consisting of extremely fine glass fibers. It is produced through a two-stage process - glass manufacture involving melting raw materials and fiber drawing where the melt is passed through bushings to produce continuous fibers. There are different types of glass fibers based on their composition, including soda-lime, borosilicate, and quartz fibers. Glass fiber has properties like high tensile strength, electrical insulation, and heat and corrosion resistance, making it useful for applications such as thermal and sound insulation, reinforcement of materials, and FRP tanks.
CARBON FIBRE, GLASS FIBRE AND OPTICAL FIBRE
Carbon fibers are composed of carbon atoms bonded together in sheets, similar to graphite. They were first created in 1958 and are made by heating rayon or petroleum pitch. Carbon fibers have high strength and stiffness but low density, and are used in aerospace, automotive, sports equipment, and other applications.
Suresh seminr ppt final
The document summarizes an investigation into brazing BZT-Ti6Al4V and Alumina-Ti6Al4V for RF window applications under high vacuum conditions. BZT ceramic pellets were prepared via conventional solid-state reaction and sintering. Brazing was performed with active (Ticusil, Cusil-ABA) and non-active (BAg8) brazing alloys under high vacuum. Optical microscopy, SEM-EDS, and shear testing were used to characterize the brazed joints. The results showed formation of reaction layers, metallurgical bonding between ceramic and metal, and shear strengths sufficient for the intended application.
Lecture 2 17_08_2021
This document provides information about a Material Science and Engineering course including the course name and code, credits, delivery details, faculty, proposed date, and program outcomes. It then summarizes the different types of materials classified as plastics, wood, composites, ceramics, metals, fabrics, and smart materials. Examples are given for each classification along with brief descriptions. Assessment criteria for the course are also listed.
Glass fibers composite manufacturing processes
This document discusses glass fibers, including their history, compositions, manufacturing process, products, and properties. It notes that ancient Egyptians used glass fibers decoratively but Owens Corning first mass produced continuous glass fibers in the 1930s. The major constituent of glass fibers is silica. Different glass compositions including E-glass, S-2 glass, and AR-glass are outlined. The manufacturing process involves batch mixing, melting, fiberizing the molten glass through bushings, and applying a sizing. Common products include roving, woven roving, mats, fabrics, and yarns. Glass fibers provide strength, stiffness, chemical resistance, and are non-flammable. Their applications include transportation, electronics,
The profile of zirconium oxide
Zirconium oxide plays an important role in glass refractory and it is an important chemical composition of zircon related refractory, such as fused cast azs block, zircon brick, fused cast high zirconia brick and zircon mullite brick . Zirconium oxide is a white crystalline which is difficult to dissolve in water, hydrochloric acid and dilute sulfuric acid. Zirconium oxide has the characteristics of high melting point, high resistance coefficient, high refractive index and low thermal expansion coefficient.
Important Ceramics and their uses
Ceramics are inorganic materials known for their strength and heat resistance. They are formed through processes involving heating such as firing or sintering. Common ceramics include alumina, silicon carbide, and zirconia. Alumina is produced from bauxite and used in armor and abrasives. Silicon carbide is very hard and thermally conductive, making it useful for brakes, electronics, and furnace parts. Zirconia is used to make cubic zirconia gems and oxygen sensors. Ceramic composites like carbon-carbon are also used where high heat resistance is required. However, ceramic engines have not been commercially produced due to the difficulty of preventing cracks from forming.
Glass fiber in modern world
A brief presentation on Glass fiber by students of Ahsanullah University of Science and Technology (AUST)
Fiber glass basics
Fiberglass is a material made of thin glass threads used for textiles and insulation. It exists in two main types, S-glass which is high strength but expensive, and E-glass which is cheaper. Fiberglass is used in many industries like automotive, textiles, and construction for items like car parts, clothing, and reinforcement of structures due to its durability and heat resistance.
IRJET- Comparision of AL203 + SIO2 and AL203 Coating as Thermal Barrier in AI...
The document discusses a study that coated AISI 4140 steel with thermal barrier coatings (TBC) made of Al2O3-SiO2 composites to improve its thermal resistance for use in rocket nozzles. Different ratios of Al2O3 and SiO2 were tested via flame spraying along with varying numbers of coating layers/plies. Characterization of the coatings found that a 50% Al2O3 - 50% SiO2 ratio with 6 plies achieved the highest adhesive strength of 16 MPa. Mullite formation, which improves thermal resistance, initially occurred with a 70% Al2O3 - 30% SiO2 ratio. The coatings were analyzed using SEM, XRD,
Glass fibres
This document discusses different types of high performance fibers, including E-glass and S-glass fibers. E-glass fibers are made of alumina-calcium-borosilicate glasses and are used as a general purpose fiber where strength and electrical resistivity are required. S-glass fibers have 30-40% higher tensile strength and 16-20% higher modulus than E-glass due to their magnesium aluminosilicate composition. S-glass fibers are used in applications requiring high strength and performance, such as aerospace and marine industries. The document describes the manufacturing and properties of E-glass and S-glass fibers.
preparatory techniques of metals in laboratory
This document discusses different mounting and preparation techniques for specimens to be examined under a microscope. It describes hot and cold mounting, polishing, grinding, and mesh size. It also discusses the importance of etching, including optimal etching time depending on the system. Microstructures of pure iron, low carbon steel, and 314L stainless steel are described. The principles of a metallurgical microscope and precautions for etching are provided.
Presentation on glass fiber
This document summarizes information about glass fiber, including its history, manufacturing process, properties, applications, and end products. Glass fiber is made of extremely fine glass fibers and is produced through a process of heating and drawing glass into fibers. It has good strength, durability, and electrical resistivity. Major applications of glass fiber include composites for transportation, electronics, construction, infrastructure, aerospace, and medical products. Glass fiber has comparable mechanical properties to carbon fiber but is cheaper and less brittle. It has a bright future due to its unique physical properties.
THERMAL BARRIER COATING seminar report Nagesh bhagwan shejol
The desired to reach higher efficiencies, lower specific fuel consumption and reduced emission in modern engines has becomes the primary focus of engine researches and manufactures over the past three decades. Ceramic coating is a solution to such problem as they provide good thermal barrier properties for designers. In the design of adiabatic engines, reducing in cylinder heat rejection requires very special thermal barrier coatings on the engine combustion chamber. Partial Thermal barrier coatings (TBC) on the top surface of the piston is considered as a solution for reduction of unburned Hydrocarbon (HC) emission produce by incomplete combustion with respect to crevice volume when engines start. The TBC on the top piston surface decreases the thermal conductivity and increases the unburned charged oxidation, so that the metallic substrates will be exposed to lower peak temperature thereby reducing the thermal stress in engines components. Also thermal barrier coatings on other elements of combustion chamber of internal combustion engine offer advantages including fuel efficiency, multi fuel capacity and high power density. Therefore, thermal barrier coating (TBC) technology is successfully applied to the internal combustion engines, in particular to the combustion chamber.
Thermal barier coating
This document discusses thermal barrier coatings (TBCs) used to protect metallic parts from high temperatures. It provides information on the structure and processing of TBCs as well as their failure mechanisms. TBCs have a multi-layer structure consisting of a metallic bond coat and ceramic top coat to provide thermal insulation. Failure typically occurs through spallation of the top coat due to stresses from the growth of an oxide layer at the interface. The document reviews approaches to improve TBC performance and durability through heat treatments of the bond coat and developing gradient coatings.
Glass fiber
This document provides information about glass fiber, including its composition, types, chemical and physical properties, uses, and structure. There are two main types of glass fiber produced commercially, known as E glass and C glass. Glass fiber is made of extremely fine fibers of glass and consists of sodium, calcium, and silicate substances. It has good tensile strength and resilience but poor elasticity and ability to resist friction. Its key uses include in aircraft/aerospace, appliances, construction, consumer goods, and more.
themal barrier coating report
Thermal barrier coatings (TBCs) were first applied to gas turbine engine blades in the late 1980s to increase engine efficiency and temperatures. TBCs lower the metal surface temperature of superalloy components, protecting them from oxidation and corrosion allowing for higher operating temperatures. A typical TBC system uses a bond coat that forms a protective thermally grown oxide layer and a ceramic top coat with low thermal conductivity to further insulate the metal underneath. New fabrication methods for thicker, more uniformly porous top coats and diffusion strengthened bond coats have improved TBC performance and efficiency.
Glass fiber & Carbon fiber
The document discusses different types of glass fibers and their properties and uses. It describes four main types: A-glass which is similar to window glass, C-glass which has better chemical resistance, E-glass which has good electrical insulation and strength, and AE-glass which is alkali resistant. The document outlines the properties of glass fibers, including high strength, corrosion resistance, good thermal and sound insulation properties. It also discusses uses of glass fibers in civil engineering, such as reinforcing cement and concrete.
Carbon fibers in automotive and aircraft applications
Carbon fibers have several advantages including high stiffness, high tensile strength, low weight, high chemical resistance, high temperature tolerance and low thermal expansion. These properties have made carbon fiber very popular in aerospace, civil engineering, military, and motor sports, along with other competition sports.
High quality mgo waterproof sip panels for building
MGO waterproof SIP panels are a lightweight, fireproof, waterproof building material composed of magnesium oxide boards with a core material like polystyrene foam or rock wool. The panels come in various sizes from 4-20cm thick and weigh 15-30kg/m2, making them lighter than other wall panels. They have a fireproof rating of Class A and can withstand soaking in water for days without losing integrity. MGO panels also provide soundproofing of up to 36dB and insulation. They are 100% environmentally friendly and easy to install through cutting, planning, drilling, and other common techniques.
Fireproof mgo gray board substitute for gypsum panel
Edge: Squre, Taper, Beveled,Grooved
Standard Size(mm): 1200x2400mm/1220x2440mm
1200x2700mm/1220x2745mm
1200x3000mm/1220x3050mm
Max. Width(mm):1220mm
Max. Length(mm) 3660,,
Thickness range(mm) 3-25mm
More Related Content
What's hot
Manufacturing of honeycomb materials
The document discusses elastomers and reinforced plastics. It defines elastomers as polymers with elastic properties and describes common elastomers like natural rubber, synthetic rubbers, and thermoplastic elastomers. It also discusses the manufacturing processes for elastomers including polymerization, compounding, extrusion, molding, and curing. For reinforced plastics, it describes common reinforcing fibers like glass, carbon, and aramid fibers and the processes used to manufacture fiber reinforced plastics like resin transfer molding. It compares the advantages of fiber reinforced plastics to metals and discusses applications of these materials in Pakistan.
Glass Fibre
Glass fiber is a material consisting of extremely fine glass fibers. It is produced through a two-stage process - glass manufacture involving melting raw materials and fiber drawing where the melt is passed through bushings to produce continuous fibers. There are different types of glass fibers based on their composition, including soda-lime, borosilicate, and quartz fibers. Glass fiber has properties like high tensile strength, electrical insulation, and heat and corrosion resistance, making it useful for applications such as thermal and sound insulation, reinforcement of materials, and FRP tanks.
CARBON FIBRE, GLASS FIBRE AND OPTICAL FIBRE
Carbon fibers are composed of carbon atoms bonded together in sheets, similar to graphite. They were first created in 1958 and are made by heating rayon or petroleum pitch. Carbon fibers have high strength and stiffness but low density, and are used in aerospace, automotive, sports equipment, and other applications.
Suresh seminr ppt final
The document summarizes an investigation into brazing BZT-Ti6Al4V and Alumina-Ti6Al4V for RF window applications under high vacuum conditions. BZT ceramic pellets were prepared via conventional solid-state reaction and sintering. Brazing was performed with active (Ticusil, Cusil-ABA) and non-active (BAg8) brazing alloys under high vacuum. Optical microscopy, SEM-EDS, and shear testing were used to characterize the brazed joints. The results showed formation of reaction layers, metallurgical bonding between ceramic and metal, and shear strengths sufficient for the intended application.
Lecture 2 17_08_2021
This document provides information about a Material Science and Engineering course including the course name and code, credits, delivery details, faculty, proposed date, and program outcomes. It then summarizes the different types of materials classified as plastics, wood, composites, ceramics, metals, fabrics, and smart materials. Examples are given for each classification along with brief descriptions. Assessment criteria for the course are also listed.
Glass fibers composite manufacturing processes
This document discusses glass fibers, including their history, compositions, manufacturing process, products, and properties. It notes that ancient Egyptians used glass fibers decoratively but Owens Corning first mass produced continuous glass fibers in the 1930s. The major constituent of glass fibers is silica. Different glass compositions including E-glass, S-2 glass, and AR-glass are outlined. The manufacturing process involves batch mixing, melting, fiberizing the molten glass through bushings, and applying a sizing. Common products include roving, woven roving, mats, fabrics, and yarns. Glass fibers provide strength, stiffness, chemical resistance, and are non-flammable. Their applications include transportation, electronics,
The profile of zirconium oxide
Zirconium oxide plays an important role in glass refractory and it is an important chemical composition of zircon related refractory, such as fused cast azs block, zircon brick, fused cast high zirconia brick and zircon mullite brick . Zirconium oxide is a white crystalline which is difficult to dissolve in water, hydrochloric acid and dilute sulfuric acid. Zirconium oxide has the characteristics of high melting point, high resistance coefficient, high refractive index and low thermal expansion coefficient.
Important Ceramics and their uses
Ceramics are inorganic materials known for their strength and heat resistance. They are formed through processes involving heating such as firing or sintering. Common ceramics include alumina, silicon carbide, and zirconia. Alumina is produced from bauxite and used in armor and abrasives. Silicon carbide is very hard and thermally conductive, making it useful for brakes, electronics, and furnace parts. Zirconia is used to make cubic zirconia gems and oxygen sensors. Ceramic composites like carbon-carbon are also used where high heat resistance is required. However, ceramic engines have not been commercially produced due to the difficulty of preventing cracks from forming.
Glass fiber in modern world
A brief presentation on Glass fiber by students of Ahsanullah University of Science and Technology (AUST)
Fiber glass basics
Fiberglass is a material made of thin glass threads used for textiles and insulation. It exists in two main types, S-glass which is high strength but expensive, and E-glass which is cheaper. Fiberglass is used in many industries like automotive, textiles, and construction for items like car parts, clothing, and reinforcement of structures due to its durability and heat resistance.
IRJET- Comparision of AL203 + SIO2 and AL203 Coating as Thermal Barrier in AI...
The document discusses a study that coated AISI 4140 steel with thermal barrier coatings (TBC) made of Al2O3-SiO2 composites to improve its thermal resistance for use in rocket nozzles. Different ratios of Al2O3 and SiO2 were tested via flame spraying along with varying numbers of coating layers/plies. Characterization of the coatings found that a 50% Al2O3 - 50% SiO2 ratio with 6 plies achieved the highest adhesive strength of 16 MPa. Mullite formation, which improves thermal resistance, initially occurred with a 70% Al2O3 - 30% SiO2 ratio. The coatings were analyzed using SEM, XRD,
Glass fibres
This document discusses different types of high performance fibers, including E-glass and S-glass fibers. E-glass fibers are made of alumina-calcium-borosilicate glasses and are used as a general purpose fiber where strength and electrical resistivity are required. S-glass fibers have 30-40% higher tensile strength and 16-20% higher modulus than E-glass due to their magnesium aluminosilicate composition. S-glass fibers are used in applications requiring high strength and performance, such as aerospace and marine industries. The document describes the manufacturing and properties of E-glass and S-glass fibers.
preparatory techniques of metals in laboratory
This document discusses different mounting and preparation techniques for specimens to be examined under a microscope. It describes hot and cold mounting, polishing, grinding, and mesh size. It also discusses the importance of etching, including optimal etching time depending on the system. Microstructures of pure iron, low carbon steel, and 314L stainless steel are described. The principles of a metallurgical microscope and precautions for etching are provided.
Presentation on glass fiber
This document summarizes information about glass fiber, including its history, manufacturing process, properties, applications, and end products. Glass fiber is made of extremely fine glass fibers and is produced through a process of heating and drawing glass into fibers. It has good strength, durability, and electrical resistivity. Major applications of glass fiber include composites for transportation, electronics, construction, infrastructure, aerospace, and medical products. Glass fiber has comparable mechanical properties to carbon fiber but is cheaper and less brittle. It has a bright future due to its unique physical properties.
THERMAL BARRIER COATING seminar report Nagesh bhagwan shejol
The desired to reach higher efficiencies, lower specific fuel consumption and reduced emission in modern engines has becomes the primary focus of engine researches and manufactures over the past three decades. Ceramic coating is a solution to such problem as they provide good thermal barrier properties for designers. In the design of adiabatic engines, reducing in cylinder heat rejection requires very special thermal barrier coatings on the engine combustion chamber. Partial Thermal barrier coatings (TBC) on the top surface of the piston is considered as a solution for reduction of unburned Hydrocarbon (HC) emission produce by incomplete combustion with respect to crevice volume when engines start. The TBC on the top piston surface decreases the thermal conductivity and increases the unburned charged oxidation, so that the metallic substrates will be exposed to lower peak temperature thereby reducing the thermal stress in engines components. Also thermal barrier coatings on other elements of combustion chamber of internal combustion engine offer advantages including fuel efficiency, multi fuel capacity and high power density. Therefore, thermal barrier coating (TBC) technology is successfully applied to the internal combustion engines, in particular to the combustion chamber.
Thermal barier coating
This document discusses thermal barrier coatings (TBCs) used to protect metallic parts from high temperatures. It provides information on the structure and processing of TBCs as well as their failure mechanisms. TBCs have a multi-layer structure consisting of a metallic bond coat and ceramic top coat to provide thermal insulation. Failure typically occurs through spallation of the top coat due to stresses from the growth of an oxide layer at the interface. The document reviews approaches to improve TBC performance and durability through heat treatments of the bond coat and developing gradient coatings.
Glass fiber
This document provides information about glass fiber, including its composition, types, chemical and physical properties, uses, and structure. There are two main types of glass fiber produced commercially, known as E glass and C glass. Glass fiber is made of extremely fine fibers of glass and consists of sodium, calcium, and silicate substances. It has good tensile strength and resilience but poor elasticity and ability to resist friction. Its key uses include in aircraft/aerospace, appliances, construction, consumer goods, and more.
themal barrier coating report
Thermal barrier coatings (TBCs) were first applied to gas turbine engine blades in the late 1980s to increase engine efficiency and temperatures. TBCs lower the metal surface temperature of superalloy components, protecting them from oxidation and corrosion allowing for higher operating temperatures. A typical TBC system uses a bond coat that forms a protective thermally grown oxide layer and a ceramic top coat with low thermal conductivity to further insulate the metal underneath. New fabrication methods for thicker, more uniformly porous top coats and diffusion strengthened bond coats have improved TBC performance and efficiency.
Glass fiber & Carbon fiber
The document discusses different types of glass fibers and their properties and uses. It describes four main types: A-glass which is similar to window glass, C-glass which has better chemical resistance, E-glass which has good electrical insulation and strength, and AE-glass which is alkali resistant. The document outlines the properties of glass fibers, including high strength, corrosion resistance, good thermal and sound insulation properties. It also discusses uses of glass fibers in civil engineering, such as reinforcing cement and concrete.
Carbon fibers in automotive and aircraft applications
Carbon fibers have several advantages including high stiffness, high tensile strength, low weight, high chemical resistance, high temperature tolerance and low thermal expansion. These properties have made carbon fiber very popular in aerospace, civil engineering, military, and motor sports, along with other competition sports.
What's hot (20)
IRJET- Comparision of AL203 + SIO2 and AL203 Coating as Thermal Barrier in AI...
IRJET- Comparision of AL203 + SIO2 and AL203 Coating as Thermal Barrier in AI...
THERMAL BARRIER COATING seminar report Nagesh bhagwan shejol
THERMAL BARRIER COATING seminar report Nagesh bhagwan shejol
Carbon fibers in automotive and aircraft applications
Carbon fibers in automotive and aircraft applications
Similar to Choice level glass mgo board
High quality mgo waterproof sip panels for building
MGO waterproof SIP panels are a lightweight, fireproof, waterproof building material composed of magnesium oxide boards with a core material like polystyrene foam or rock wool. The panels come in various sizes from 4-20cm thick and weigh 15-30kg/m2, making them lighter than other wall panels. They have a fireproof rating of Class A and can withstand soaking in water for days without losing integrity. MGO panels also provide soundproofing of up to 36dB and insulation. They are 100% environmentally friendly and easy to install through cutting, planning, drilling, and other common techniques.
Fireproof mgo gray board substitute for gypsum panel
Edge: Squre, Taper, Beveled,Grooved
Standard Size(mm): 1200x2400mm/1220x2440mm
1200x2700mm/1220x2745mm
1200x3000mm/1220x3050mm
Max. Width(mm):1220mm
Max. Length(mm) 3660,,
Thickness range(mm) 3-25mm
Sanded or sanding fireproof mgo board
Sanded/sanding fireproof mgo board is a new type of building material made from magnesium oxide and other materials like perlite and fiberglass. It has properties of being non-toxic, safe, and eco-friendly. It is available in standard sizes from 1200x2400mm up to 1200x3000mm and thicknesses ranging from 3mm to 25mm. The board has high compressive strength, impact resistance, density, and is fireproof and water resistant.
Fireproof grade e sanding surface mgo board
This document provides specifications for fireproof grade E+ sanding waterproof bathroom wall panels made of magnesium oxide and other materials. The panels have 270 minutes of fire resistance, are waterproof, lightweight, easy to install, tough, and non-toxic. They can be used for partitions, interior/exterior walls, ceilings, floors, and fireproof doors. The panels have a fireproof rating of A, are moisture resistant, provide heat and sound insulation, and are impact resistant while being light weight.
En13501 fireproof magnesium oxide board for drywall
Magnesium oxide board is a fireproof drywall material made of magnesium oxide, fiberglass mesh, and other additives. It has many advantages including being waterproof, fireproof, soundproof, and environmentally friendly. Magnesium oxide board meets various international fire safety standards and can be used for walls, ceilings, partitions, and other applications in buildings. It has good mechanical properties like density, bending strength, and moisture resistance according to test results.
STMAT flexible mica sheet
Flexible mica sheet is made from mica paper and silicone resin through high temperature lamination and pressing to produce an electrical insulation material. It exists in two categories - muscovite and phlogopite - which have different heat resistance levels. Flexible mica sheet is mainly used for internal electrical insulation in appliances like hair dryers and space heaters due to its flexibility which allows it to be wound or folded unlike rigid mica sheets. It provides insulation at a lower cost than mica tape which has reinforcing fibers but is more expensive.
Magnesium oxide board benefits
RockMaxpan providing chloride free Magnesium oxide board is made of magnesium oxide cement and foam particle, mostly used for interior construction or renovation project, Sandwich insulation panel, Marine decoration, Fireplaces Pad, Fire resistant door and more.
Day ch e ngineering companies presentation
This document provides information on building materials and products offered by Day Ch Engineering, an ISO certified company. It lists various types of partitions, ceilings, ceiling tiles, prefab houses, raised flooring, insulation materials, roofing products, and wall cladding. Details are provided on gypsum boards, metal framing, grid systems, direct application plaster, fiber and mineral wool insulation, rubber for sound absorption, and colour coated and cement roofing sheets. Various branded products and specifications are mentioned. The company welcomes project requirements and positive responses.
Good quality 18mm mgo floor board
This document summarizes the properties and uses of MGO floor boards. MGO boards are made of magnesium oxide and other materials, making them fireproof, waterproof, soundproof, and environmentally friendly. They can withstand high temperatures and moisture without damage. MGO boards are used in construction for walls, ceilings, partitions, and doors due to their fire resistance and durability. They are available in various sizes for different applications.
Bylaws
This document discusses gypsum and its use as a building material. Some key points:
- Gypsum is a mineral composed of calcium sulfate dihydrate that is widely used in construction.
- Common gypsum products used in buildings include gypsum plaster boards, gypsum plaster, and gypsum blocks.
- Gypsum provides properties like fire resistance, acoustic insulation, and moderate thermal insulation.
- Indian Standards cover specifications for gypsum plaster boards, coated/laminated boards, and reinforced boards.
- Common applications of gypsum include interior partitions, wall and ceiling linings, decorative plaster, and tiles.
Polycarbonate sheets Details
This document provides an introduction and overview of polycarbonate materials. It discusses the discovery and early production of polycarbonate in the 1950s. It also outlines the key properties of polycarbonate including its impact strength, thermal insulation, fire resistance, UV protection, and weather resistance. Finally, it describes the various types and applications of polycarbonate sheets, including hollow, solid, corrugated, and other styles.
Nano tech
Nanotechnology involves manipulating materials at the nanoscale to enhance their properties. In concrete, nanosilica and carbon nanotubes are used to improve strength and durability. Carbon nanotubes are cylindrical structures that can strengthen concrete. Nanosilica controls degradation and improves water resistance. Nanoparticles in paint provide insulation and corrosion protection. Nanoparticles in glass coatings sterilize surfaces and prevent fouling. Nanoparticles in wood and stone coatings protect from dirt and weathering while allowing surfaces to breathe. In steel, nanoparticles at grain boundaries increase corrosion and weld resistance.
Fireproof waterprof light weight eps cement sandwich wall panel for prefab house
Fireproof waterprof light weight eps cement sandwich wall panel for prefab houseBeijing Hocreboard Building Materials Co.,Ltd
Fireproof Waterprof Light Weight EPS Cement Sandwich Wall Panel for Prefab House are cement foam boards with a core of cement, EPS, silicate, glass fiber, and foam. They have thicknesses between 50-150mm, densities of 450-650kg/m3, and thermal conductivity of 0.4-0.8w/m.k. They are used for exterior insulation, have fire retardant and waterproof properties, and are lightweight. Typical applications include prefabricated houses, hospitals, and offices.Fireproof waterprof light weight eps cement sandwich wall panel for prefab house
Fireproof waterprof light weight eps cement sandwich wall panel for prefab houseBeijing Hocreboard Building Materials Co.,Ltd
The document describes a fireproof and waterproof lightweight EPS cement sandwich wall panel for prefabricated houses. The panel is 50-150mm thick with a density of 450-650kg/m3. It has double 4mm fiber cement boards on the faces and an EPS foam core. The panel has thermal insulation, waterproof, and flame retardant properties and is widely used in construction for its light weight, easy installation, and suitability for places with special requirements.Acoustics Material Study - Architectural Acoustics - NIT Trichy
This document discusses various materials used for acoustic treatment of noise, including acoustic foams, polyurethane foams, asbestos products, balsa wood, brickwork, clinker block, concrete, lightweight concrete, glass, foamed glass, glass fibre wool, gypsum, mineral wool, lead sheets, lead/foam sandwiches, lead-loaded plastic sheets, and leaded plastics. It provides details on the sound absorbing and insulating properties of these materials.
12mm thickness water resistant decorative interior wall mgo board
12mm thickness water resistant decorative interior wall mgo boardBeijing Hocreboard Building Materials Co.,Ltd
This document provides information about 12mm thickness water resistant decorative interior wall Mgo board. It describes the material as made from magnesium oxide, anti-alkali fiber mesh, perlite and other materials. Technical data on an 8mm thickness board is given including flexural strength, water absorption rates, nail holding force and shock resistance. Various thickness, sizes and edge types are listed for application to walls, ceilings, floors and other interior surfaces. Contact information is provided for the manufacturer.Metallised films
M/S Patidar Corporation manufactures and markets metallized films for packaging applications. It has extensive lamination capabilities for metallized films with materials like paper, board, and plastic films. The company has the capacity to process 100 tons of foil per month. Metallized films are polymer films coated with a very thin layer of metal, usually aluminum, which provides a glossy metallic appearance at lower weight and cost than aluminum foil. Patidar Corporation offers various metallized film products for applications like packaging, insulation, and electronics. It provides laminated products using metallized films with materials like woven fabrics, non-woven fabrics, paper, and various plastic films.
4x9 feet fireproof mgo partition wall board
This document describes a 4x9 feet fireproof MGO partition wall board. It is made from magnesia and magnesium chloride through a manufacturing process involving preparing and mixing raw materials, laying and cold rolling the material, drying, demolding, cutting, and edging to produce the final product. The board can be used for wall paneling, partitions, ceilings, and tile backing. It is offered in various standard and customizable sizes, thicknesses, colors, and has square edges.
Nano in civil
This document discusses the use of nanotechnology in civil engineering applications. It begins by defining nanotechnology and nanoscale materials like carbon nanotubes and nano-silica. It then discusses several uses of nanotechnology in concrete to improve strength, durability, and permeability. The document also discusses uses of nanotechnology in steel, wood, stone, and coatings/paints to provide benefits like increased strength, corrosion resistance, self-cleaning properties, and insulation. Specific products discussed include Cuore concrete, SandvikNanoflex steel, MMFX2 steel, and the Nansulate insulation coating.
Floating Concrete Research Paper
This document presents an experimental study on producing floating concrete using thermocol beads as a substitute for fine aggregates. Floating concrete contains lightweight materials that reduce its density to less than the density of water (1000 kg/m3), allowing it to float. In this study, fine aggregate is replaced with thermocol beads at different proportions (0-20%) to produce lightweight floating concrete. Specimens are tested at 7 and 28 days to determine compressive strength, density, and water absorption. Test results show that compressive strength and density decrease as the proportion of thermocol beads increases and water-cement ratio decreases.
Similar to Choice level glass mgo board (20)
High quality mgo waterproof sip panels for building
High quality mgo waterproof sip panels for building
Fireproof mgo gray board substitute for gypsum panel
Fireproof mgo gray board substitute for gypsum panel
En13501 fireproof magnesium oxide board for drywall
En13501 fireproof magnesium oxide board for drywall
Fireproof waterprof light weight eps cement sandwich wall panel for prefab house
Fireproof waterprof light weight eps cement sandwich wall panel for prefab house
Fireproof waterprof light weight eps cement sandwich wall panel for prefab house
Fireproof waterprof light weight eps cement sandwich wall panel for prefab house
Acoustics Material Study - Architectural Acoustics - NIT Trichy
Acoustics Material Study - Architectural Acoustics - NIT Trichy
12mm thickness water resistant decorative interior wall mgo board
12mm thickness water resistant decorative interior wall mgo board
Recently uploaded
Stainless Steel Conveyor Manufacturers Chennai
https://conveyorManufacturersManufacturers.com/
#bangalore #hyderabad #cochin #chennai #munnar #ooty #mysore #alappuzha #pondicherry #madurai #karnataka #tirupati #visakhapatnam #coimbatore #kerala #thanjavur #thiruvananthapuram #andhra #telangana #tamilnadu #andamanandnicobar #lakshadweep #hubli #secunderabad #kozhikode #mangaluru #trichy #palakkad #dharwad #kurnool #kottayam #raichur #amravati #vijayawada #kanyakumari #rameshwaram #warangal #mahabalipuram #mumbai #pune #nashik
➒➌➎➏➑➐➋➑➐➐ Satta Matka Dpboss Matka Guessing Indian Matka KALYAN MATKA |
➒➌➎➏➑➐➋➑➐➐ Satta Matka Dpboss Matka Guessing Indian Matka KALYAN MATKA |➒➌➎➏➑➐➋➑➐➐Dpboss Matka Guessing Satta Matka Kalyan Chart Indian Matka
➒➌➎➏➑➐➋➑➐➐ Satta Matka Dpboss Matka Guessing Indian Matka
KALYAN MATKA | MATKA RESULT | KALYAN MATKA TIPS | SATTA MATKA | MATKA.COM | MATKA PANA JODI TODAY | BATTA SATKA | MATKA PATTI JODI NUMBER | MATKA RESULTS | MATKA CHART | MATKA JODI | SATTA COM | FULL RATE GAME | MATKA GAME | MATKA WAPKA | ALL MATKA RESULT LIVE ONLINE | MATKA RESULT | KALYAN MATKA RESULT | DPBOSS MATKA 143 | MAIN MATKASatta Matka Dpboss Kalyan Matka Results Kalyan Chart
SATTA MATKA DPBOSS KALYAN MATKA RESULTS KALYAN CHART KALYAN MATKA MATKA RESULT KALYAN MATKA TIPS SATTA MATKA MATKA COM MATKA PANA JODI TODAY BATTA SATKA MATKA PATTI JODI NUMBER MATKA RESULTS MATKA CHART MATKA JODI SATTA COM INDIA SATTA MATKA MATKA TIPS MATKA WAPKA ALL MATKA RESULT LIVE ONLINE MATKA RESULT KALYAN MATKA RESULT DPBOSS MATKA 143 MAIN MATKA KALYAN MATKA RESULTS KALYAN CHART
Pro Tips for Effortless Contract Management
Tired of chasing down expiring contracts and drowning in paperwork? Mastering contract management can significantly enhance your business efficiency and productivity. This guide unveils expert secrets to streamline your contract management process. Learn how to save time, minimize risk, and achieve effortless contract management.
➒➌➎➏➑➐➋➑➐➐ Satta Matka Dpboss Matka Guessing Indian Matka
➒➌➎➏➑➐➋➑➐➐ Satta Matka Dpboss Matka Guessing Indian Matka➒➌➎➏➑➐➋➑➐➐Dpboss Matka Guessing Satta Matka Kalyan Chart Indian Matka
➒➌➎➏➑➐➋➑➐➐ Satta Matka Dpboss Matka Guessing Indian Matka Satta Matta Matka KALYAN MATKA | MATKA RESULT | KALYAN MATKA TIPS | SATTA MATKA | MATKA.COM | MATKA PANA JODI TODAY | BATTA SATKA | MATKA PATTI JODI NUMBER | MATKA RESULTS | MATKA CHART | MATKA JODI | SATTA COM | FULL RATE GAME | MATKA GAME | MATKA WAPKA | ALL MATKA RESULT LIVE ONLINE | MATKA RESULT | KALYAN MATKA RESULT | DPBOSS MATKA 143 ➒➌➎➏➑➐➋➑➐➐ Satta Matka Dpboss Matka Guessing Indian Matka
➒➌➎➏➑➐➋➑➐➐ Satta Matka Dpboss Matka Guessing Indian Matka➒➌➎➏➑➐➋➑➐➐Dpboss Matka Guessing Satta Matka Kalyan Chart Indian Matka
➒➌➎➏➑➐➋➑➐➐ Satta Matka Dpboss Matka Guessing Indian Matka KALYAN MATKA | MATKA RESULT | KALYAN MATKA TIPS | SATTA MATKA | MATKA.COM | MATKA PANA JODI TODAY | BATTA SATKA | MATKA PATTI JODI NUMBER | MATKA RESULTS | MATKA CHART | MATKA JODI | SATTA COM | FULL RATE GAME | MATKA GAME | MATKA WAPKA | ALL MATKA RESULT LIVE ONLINE | MATKA RESULT | KALYAN MATKA RESULT | DPBOSS MATKA 143 | MAIN MATKAL'indice de performance des ports à conteneurs de l'année 2023
Une évaluation comparable de la performance basée sur le temps d'escale des navires
L'objectif de l'ICPP est d'identifier les domaines d'amélioration qui peuvent en fin de compte bénéficier à toutes les parties concernées, des compagnies maritimes aux gouvernements nationaux en passant par les consommateurs. Il est conçu pour servir de point de référence aux principaux acteurs de l'économie mondiale, notamment les autorités et les opérateurs portuaires, les gouvernements nationaux, les organisations supranationales, les agences de développement, les divers intérêts maritimes et d'autres acteurs publics et privés du commerce, de la logistique et des services de la chaîne d'approvisionnement.
Le développement de l'ICPP repose sur le temps total passé par les porte-conteneurs dans les ports, de la manière expliquée dans les sections suivantes du rapport, et comme dans les itérations précédentes de l'ICPP. Cette quatrième itération utilise des données pour l'année civile complète 2023. Elle poursuit le changement introduit l'année dernière en n'incluant que les ports qui ont eu un minimum de 24 escales valides au cours de la période de 12 mois de l'étude. Le nombre de ports inclus dans l'ICPP 2023 est de 405.
Comme dans les éditions précédentes de l'ICPP, la production du classement fait appel à deux approches méthodologiques différentes : une approche administrative, ou technique, une méthodologie pragmatique reflétant les connaissances et le jugement des experts ; et une approche statistique, utilisant l'analyse factorielle (AF), ou plus précisément la factorisation matricielle. L'utilisation de ces deux approches vise à garantir que le classement des performances des ports à conteneurs reflète le plus fidèlement possible les performances réelles des ports, tout en étant statistiquement robuste.
High-Quality IPTV Monthly Subscription for $15
Experience high-quality entertainment with our IPTV monthly subscription for just $15. Access a vast array of live TV channels, movies, and on-demand shows with crystal-clear streaming. Our reliable service ensures smooth, uninterrupted viewing at an unbeatable price. Perfect for those seeking premium content without breaking the bank. Start streaming today!
https://rb.gy/f409dk
Enhancing Adoption of AI in Agri-food: Introduction
Introduction to the Panel on: Pathways and Challenges: AI-Driven Technology in Agri-Food, AI4Food, University of Guelph
“Enhancing Adoption of AI in Agri-food: a Path Forward”, 18 June 2024
2024.06 CPMN Cambridge - Beyond Now-Next-Later.pdf
Slides presented by Phil Hornby, Founder and Director of "for product people", at Cambridge Product Management Network, on Monday 17th June 2024.
Kalyan Chart Satta Matka Dpboss Kalyan Matka Results
KALYAN CHART SATTA MATKA DPBOSS KALYAN MATKA RESULTS KALYAN MATKA MATKA RESULT KALYAN MATKA TIPS SATTA MATKA MATKA COM MATKA PANA JODI TODAY BATTA SATKA MATKA PATTI JODI NUMBER MATKA RESULTS MATKA CHART MATKA JODI SATTA COM INDIA SATTA MATKA MATKA TIPS MATKA WAPKA ALL MATKA RESULT LIVE ONLINE MATKA RESULT KALYAN MATKA RESULT DPBOSS MATKA 143 MAIN MATKA KALYAN MATKA RESULTS KALYAN CHART
Satta Matka Dpboss Kalyan Matka Results Kalyan Chart
SATTA MATKA DPBOSS KALYAN MATKA RESULTS KALYAN CHART KALYAN MATKA MATKA RESULT KALYAN MATKA TIPS SATTA MATKA MATKA COM MATKA PANA JODI TODAY BATTA SATKA MATKA PATTI JODI NUMBER MATKA RESULTS MATKA CHART MATKA JODI SATTA COM INDIA SATTA MATKA MATKA TIPS MATKA WAPKA ALL MATKA RESULT LIVE ONLINE MATKA RESULT KALYAN MATKA RESULT DPBOSS MATKA 143 MAIN MATKA KALYAN MATKA RESULTS KALYAN CHART INDIA MATKA KALYAN SATTA MATKA 420 INDIAN MATKA SATTA KING MATKA FIX JODI FIX FIX FIX SATTA NAMBAR MATKA INDIA SATTA BATTA
Satta Matka Dpboss Kalyan Matka Results Kalyan Chart
SATTA MATKA DPBOSS KALYAN MATKA RESULTS KALYAN CHART KALYAN MATKA MATKA RESULT KALYAN MATKA TIPS SATTA MATKA MATKA COM MATKA PANA JODI TODAY BATTA SATKA MATKA PATTI JODI NUMBER MATKA RESULTS MATKA CHART MATKA JODI SATTA COM INDIA SATTA MATKA MATKA TIPS MATKA WAPKA ALL MATKA RESULT LIVE ONLINE MATKA RESULT KALYAN MATKA RESULT DPBOSS MATKA 143 MAIN MATKA KALYAN MATKA RESULTS KALYAN CHART
Satta Matka Dpboss Kalyan Matka Results Kalyan Chart
SATTA MATKA DPBOSS KALYAN MATKA RESULTS KALYAN CHART KALYAN MATKA MATKA RESULT KALYAN MATKA TIPS SATTA MATKA MATKA COM MATKA PANA JODI TODAY BATTA SATKA MATKA PATTI JODI NUMBER MATKA RESULTS MATKA CHART MATKA JODI SATTA COM INDIA SATTA MATKA MATKA TIPS MATKA WAPKA ALL MATKA RESULT LIVE ONLINE MATKA RESULT KALYAN MATKA RESULT DPBOSS MATKA 143 MAIN MATKA KALYAN MATKA RESULTS KALYAN CHART
Kirill Klip GEM Royalty TNR Gold Copper Presentation
Tesla Energy rEVolution And The Golden Age For Copper: Kirill Klip GEM Royalty TNR Gold Copper Presentation
欧洲杯投注-欧洲杯投注外围盘口-欧洲杯投注盘口app|【网址🎉ac22.net🎉】
【网址🎉ac22.net🎉】欧洲杯投注是体育博彩和在线赌场之一，得益于UKGC的三项许可。 成立之初是三名博彩公司将40家博彩商店的合并的结果，共同创建一家名为欧洲杯投注的公司。 欧洲杯投注在线赌场为游戏爱好者提供了300多种游戏，其中200多种老虎机，其他游戏包括二十一点，轮盘，真人荷官和真人赌场等。
Satta Matka Dpboss Kalyan Matka Results Kalyan Chart
SATTA MATKA DPBOSS KALYAN MATKA RESULTS KALYAN MATKA MATKA RESULT KALYAN MATKA TIPS SATTA MATKA MATKA COM MATKA PANA JODI TODAY BATTA SATKA MATKA PATTI JODI NUMBER MATKA RESULTS MATKA CHART MATKA JODI SATTA COM INDIA SATTA MATKA MATKA TIPS MATKA WAPKA ALL MATKA RESULT LIVE ONLINE MATKA RESULT KALYAN MATKA RESULT DPBOSS MATKA 143 MAIN MATKA KALYAN MATKA RESULTS KALYAN CHART KALYAN CHART
Recently uploaded (20)
➒➌➎➏➑➐➋➑➐➐ Satta Matka Dpboss Matka Guessing Indian Matka KALYAN MATKA |
➒➌➎➏➑➐➋➑➐➐ Satta Matka Dpboss Matka Guessing Indian Matka KALYAN MATKA |
Satta Matka Dpboss Kalyan Matka Results Kalyan Chart
Satta Matka Dpboss Kalyan Matka Results Kalyan Chart
➒➌➎➏➑➐➋➑➐➐ Satta Matka Dpboss Matka Guessing Indian Matka
➒➌➎➏➑➐➋➑➐➐ Satta Matka Dpboss Matka Guessing Indian Matka
➒➌➎➏➑➐➋➑➐➐ Satta Matka Dpboss Matka Guessing Indian Matka
➒➌➎➏➑➐➋➑➐➐ Satta Matka Dpboss Matka Guessing Indian Matka
L'indice de performance des ports à conteneurs de l'année 2023
L'indice de performance des ports à conteneurs de l'année 2023
Enhancing Adoption of AI in Agri-food: Introduction
Enhancing Adoption of AI in Agri-food: Introduction
2024.06 CPMN Cambridge - Beyond Now-Next-Later.pdf
2024.06 CPMN Cambridge - Beyond Now-Next-Later.pdf
Kalyan Chart Satta Matka Dpboss Kalyan Matka Results
Kalyan Chart Satta Matka Dpboss Kalyan Matka Results
Satta Matka Dpboss Kalyan Matka Results Kalyan Chart
Satta Matka Dpboss Kalyan Matka Results Kalyan Chart
Satta Matka Dpboss Kalyan Matka Results Kalyan Chart
Satta Matka Dpboss Kalyan Matka Results Kalyan Chart
Satta Matka Dpboss Kalyan Matka Results Kalyan Chart
Satta Matka Dpboss Kalyan Matka Results Kalyan Chart
Kirill Klip GEM Royalty TNR Gold Copper Presentation
Kirill Klip GEM Royalty TNR Gold Copper Presentation
Satta Matka Dpboss Kalyan Matka Results Kalyan Chart
Satta Matka Dpboss Kalyan Matka Results Kalyan Chart
Choice level glass mgo board
- 1. Choice level Glass MGO board Brief introduction Magnesium Oxide Fireproof Board(usually called magnesium oxide board) is the building material widely used in the construction area. The stable magnesium colloid is reinforced by middle alkali glass fiber net and stuffed by light material then becomes new frameless decorative material. 100% no Asbestos Contained and no radioactivity.. Composition The materials of paper magnesium fireproof board are Magnesia(MgO), Magnesium Chlorid(MgCl2) and Alkali glass fiber net. Detailed Product Description 1) Sizes: 1,220 *2,440mm, 915*1800mm, 900*2400mm 2) Thickness: 3mm- 18mm. As for MGO foam board will be between 33mm to 50mm 3) Other specifications available 4) 100% asbestos free Outstanding fireproof performance 1. With density about 0.9 g/cm3 -1.2 g/cm3 . 2. Flexible and easy to make proper sculpt and designs. 3. Perdurable and great duration of life. 4. Antisepsis, mothproof, ant proof 5. Heat preservation, heat insulation, sound insulation 6. Scientific prescription, real green and environmental material 1. 100% no Asbestos Contained
- 2. 2. It is applicable to other designs of decoration and quadric process Contact Information: Beijing Hocreboard Building Materials Co.,Ltd Tel: 86 15001321220 Fax: 86 62151268 Web: www.hocre-board.com Email: info@hocre-board.com Skype: susan.wei1 WhatsApp:+8615001321220