This document discusses different methods of measuring matter, including counting, mass, and volume. It then explains how to convert between units using the factor-label method. A mole is defined as 6.02x1023 representative particles of an element or compound. The mass of one mole of a substance is called its molar mass. Molar mass can be used to convert between moles and grams. The volume of one mole of gas at standard temperature and pressure is 22.4 L.
A Strategic Approach: GenAI in EducationPeter Windle
Artificial Intelligence (AI) technologies such as Generative AI, Image Generators and Large Language Models have had a dramatic impact on teaching, learning and assessment over the past 18 months. The most immediate threat AI posed was to Academic Integrity with Higher Education Institutes (HEIs) focusing their efforts on combating the use of GenAI in assessment. Guidelines were developed for staff and students, policies put in place too. Innovative educators have forged paths in the use of Generative AI for teaching, learning and assessments leading to pockets of transformation springing up across HEIs, often with little or no top-down guidance, support or direction.
This Gasta posits a strategic approach to integrating AI into HEIs to prepare staff, students and the curriculum for an evolving world and workplace. We will highlight the advantages of working with these technologies beyond the realm of teaching, learning and assessment by considering prompt engineering skills, industry impact, curriculum changes, and the need for staff upskilling. In contrast, not engaging strategically with Generative AI poses risks, including falling behind peers, missed opportunities and failing to ensure our graduates remain employable. The rapid evolution of AI technologies necessitates a proactive and strategic approach if we are to remain relevant.
Macroeconomics- Movie Location
This will be used as part of your Personal Professional Portfolio once graded.
Objective:
Prepare a presentation or a paper using research, basic comparative analysis, data organization and application of economic information. You will make an informed assessment of an economic climate outside of the United States to accomplish an entertainment industry objective.
Biological screening of herbal drugs: Introduction and Need for
Phyto-Pharmacological Screening, New Strategies for evaluating
Natural Products, In vitro evaluation techniques for Antioxidants, Antimicrobial and Anticancer drugs. In vivo evaluation techniques
for Anti-inflammatory, Antiulcer, Anticancer, Wound healing, Antidiabetic, Hepatoprotective, Cardio protective, Diuretics and
Antifertility, Toxicity studies as per OECD guidelines
Safalta Digital marketing institute in Noida, provide complete applications that encompass a huge range of virtual advertising and marketing additives, which includes search engine optimization, virtual communication advertising, pay-per-click on marketing, content material advertising, internet analytics, and greater. These university courses are designed for students who possess a comprehensive understanding of virtual marketing strategies and attributes.Safalta Digital Marketing Institute in Noida is a first choice for young individuals or students who are looking to start their careers in the field of digital advertising. The institute gives specialized courses designed and certification.
for beginners, providing thorough training in areas such as SEO, digital communication marketing, and PPC training in Noida. After finishing the program, students receive the certifications recognised by top different universitie, setting a strong foundation for a successful career in digital marketing.
A review of the growth of the Israel Genealogy Research Association Database Collection for the last 12 months. Our collection is now passed the 3 million mark and still growing. See which archives have contributed the most. See the different types of records we have, and which years have had records added. You can also see what we have for the future.
Acetabularia Information For Class 9 .docxvaibhavrinwa19
Acetabularia acetabulum is a single-celled green alga that in its vegetative state is morphologically differentiated into a basal rhizoid and an axially elongated stalk, which bears whorls of branching hairs. The single diploid nucleus resides in the rhizoid.
Read| The latest issue of The Challenger is here! We are thrilled to announce that our school paper has qualified for the NATIONAL SCHOOLS PRESS CONFERENCE (NSPC) 2024. Thank you for your unwavering support and trust. Dive into the stories that made us stand out!
Exploiting Artificial Intelligence for Empowering Researchers and Faculty, In...Dr. Vinod Kumar Kanvaria
Exploiting Artificial Intelligence for Empowering Researchers and Faculty,
International FDP on Fundamentals of Research in Social Sciences
at Integral University, Lucknow, 06.06.2024
By Dr. Vinod Kumar Kanvaria
Exploiting Artificial Intelligence for Empowering Researchers and Faculty, In...
Ch 10 PPT...The Mole.pptx
1. Measuring Matter
● You often measure the amount of
something by one of three different
methods:
1. Count
2. Mass
3. Volume
2. Conversions
● 12 apples = 1 dozen apples Count
12 apples
1dozen apples
1 dozen apples = .20 bushel Volume
1 dozen apples
.20 bushel
1 dozen apples = 2.0 kg Mass
1 dozen apples
2.0 kg
3. Let’s learn how to
convert units by the
Factor-Label Method!!!
6. What is a Mole?
Just as 12 eggs is a dozen ( a specific
number of particles), a mole is 6.02 x 10 23
particles.
This number of representative particles is
called Avogadro’s number.
*That’s Avogadro, not
Avocado!!!!
7. What is meant by “representative particles”?
Representative particles are whatever you are talking
about: atoms, molecules, or formula units (ions).
The representative particle of most elements is the atom.
Seven elements exist as diatomic molecules, and, as such,
its representative particle is the molecule.
The seven: H2, N2, O2, F2, Cl2, Br2, I2.
8. OK, so now we know that a mole is 6.02 x1023
representative particles. So how many atoms are in
one mole of an compound, or how many moles are in
6.02 x 1023 atoms?
Example:
How many moles are in 6.02 x 1023 atoms of silver?
Solution:
1. Determine the conversion factor.
1 mole = 6.02 x 1023 representative particles
1 mol representative particles
6.02 x 1023 particles
9. 6.02 x 1023 Ag atoms x
1 mol Ag
6.02 x 1023 Ag atoms
10. To find the number of atoms in a mole of a compound,
you must determine the number of atoms in a
representative formula of that compound.
Example:
How many oxygen atoms are in a mole of CO2?
6.02 x 1023 molecules CO2
1 mole CO2
2 oxygen atoms
1 molecule CO2
x
1 mole CO2 x
= 12.04 x 1023 atoms O2; or, 1.204 x 1024 atoms O2.
11. Sec 10.2 Mass and The Mole
How many representative
Particles are in one mole??
12. When discussing the mole, using atoms leads to very
large numbers. An easier way to discuss moles is to work
with grams of atoms instead.
The gram atomic mass (gam) is the atomic mass of an
element expressed in grams.
For carbon, the gam is 12.0 g. For atomic hydrogen, the
gam is 1.0 g.
What is the gam for iron and mercury?
(55.85 g & 200.6 g)
How many atoms are contained in the gram atomic mass
of an element?
The gam contains one mole of atoms (6.02 x 1023 atoms)
of that element.
13. Thus, if 12.0 g of carbon is the gam of carbon, 12.0 g is 1
mol of carbon, and has 6.02 x 1023 atoms.
What is the mass of a mole of a compound?
To answer this you must know the formula of the
compound. The formula tells you the number of atoms of
each element in a representative particle of that
compound.
You calculate the mass of a mole of a compound by
adding together the atomic masses of the atoms making
up the compound.
This is called gram molecular mass (gmm)
Example:
What is the molecular mass of SO3?
14. Molar mass
● The mass of one mole is called “molar mass”
● E.g. 1 mol Li = 6.94 g Li
● This is expressed as 6.94 g/mol
● What are the following molar masses?
S SO2
Cu3(BO3)2
32.06 g/mol 64.06 g/mol
308.27 g/mol
Calculate molar masses (to 2 decimal places)
CaCl2
(NH4)2CO3
O2
Pb3(PO4)2
C6H12O6
Cu x 3 = 63.55 x 3 =
190.65
B x 2 = 10.81 x 2 =
21.62
O x 6 = 16.00 x 6 =
15. Molar mass
● The mass of one mole is called “molar mass”
● E.g. 1 mol Li = 6.94 g Li
● This is expressed as 6.94 g/mol
● What are the following molar masses?
S SO2
Cu3(BO3)2
32.06 g/mol 64.06 g/mol
308.27 g/mol
Calculate molar masses (to 2 decimal places)
CaCl2
(NH4)2CO3
O2
Pb3(PO4)2
C6H12O6
110.98 g/mol (Cax1, Clx2)
96.11 g/mol (Nx2, Hx8, Cx1, O
x3)
32.00 g/mol (Ox2)
811.54 g/mol (Pbx3, Px2, Ox8)
16. Example:
How many grams are in 7.20 mol of N2O3?
N2 = 28.0 g
O3 = 48.0 g
1 mole N2O3 = 76.0 g
7.20 mol N2O3 x
76.0 g N2O3
1 mol N2O3
= 547.2 g N2O3
= 5.47 x 102 g N2O3
You Try It!
1. How many grams in .720 mol Be?
2. How many moles in 2.40 g N2?
6.48 g
0.086 mol
18. Example
● If I have 2.00 moles of C13H18O2, how many
moles of each atom would I have?
19. Formula Mass
● mass of a molecule, ion, or formula unit
● sum of mass of all atoms in the chemical formula
● in amu
● Ex: H2O
● 18.01528 amu
● formula mass = molecular mass for molecular
compound
20. Example
● Find formula mass of potassium chlorate.
● KClO3
● 1(39.0983) + 1(35.4527) + 3(15.9994)
● 122.549 amu
21. Molar Masses
● mass of one mole of pure substance
● numerically equal to formula mass
● units: g/mol
● Find molar mass of barium nitrate.
● Ba(NO3)2
● 1(137.327) + 2(14.00674) + 6(15.9994)
● 261.337 g/mol
22. Molar Mass in Conversions
● can be used as a conversion factor
● between grams and moles
● What is the mass in grams of 2.50 mol of
oxygen gas?
23. Example
● Ibuprofen, C13H18O2, is the active
ingredient in many pain relievers.
● Find molar mass:
(13 x 12.011) + (18 x 1.00794) + (2 x 15.9994)
=206.29 g/mol
24. Example
● If the tablets in a bottle contain a total of 33 g
of ibuprofen, how many moles are in one
bottle?
● How many molecules of ibuprofen are in the
bottle?
25. Example
● What is the number of moles of carbon in
that bottle?
● What is the total mass in grams of carbon
in the bottle?
26. The Amount of A Mole of Gas
We have seen that one-mole amounts of liquids or solids
have different volumes than other solids or liquids. What
about the volume of gas?
Moles of gases have very predictable volumes.
Changing temperature or pressure of a gas can vary the
volume. That is why the volume of a gas is measured at a
standard temperature and pressure (STP).
Standard temperature is 0°C. Standard pressure is
101.2 kPa or 1 atmosphere (atm)
At STP, 1 mol of any gas occupies a volume of
22.4 L.
27. 22.4 L is known as the molar volume of a gas which
means it contains 6.02 x 1023 representative particles of
that gas.
Example:
Determine the volume, in liters, of 0.600 mol of SO2 gas
at STP.
0.600 mol SO2 x
22.4 L SO2
1 mol SO2
= 13.4 L SO2
Assuming STP, how many moles are in 67.2 L SO2?
67.2 L SO2 x
1 mole SO2
22.4 L SO2
= 3 mol SO2
28. Review:
1. What volume, in liters, will 0.680 mol of a
certain gas occupy?
2. How many moles is 1.33 x 104 mL of O2 at STP?
29. Mass/Density of a Gas
Would 22.4 L of one gas also have the same mass as 22.4 L
of another gas at STP?
Probably not. A mole of one gas have a mass equal to its
gfm. Different gases usually have different gfm’s.
Measuring the volume of a gas is preferred to measuring
mass. Knowing the volume can also help find the density of
the gas.
Density is found by dividing the mass of a gas by its
volume. Because volume can change with a change in
temperature, density is measured at STP.
30. Density (at STP) =
molar mass
molar volume
=
g/mol
22.4 L/mol
=
g
L
Example:
What is the density of oxygen gas at STP? (in
grams per liter.)
D =
molar mass
molar volume
=
32 g/mol
22.4 L/mol
= 1.43 g/L
31. Percent Composition
To keep your lawn healthy, wealthy, and wise you need to
use fertilizer. You can’t just use any ol’ fertilizer. You
need to use one that has the right mixture of elements or
compounds depending on what you need to do.
You need to know the relative amount of each nutrient.
This is the same in the laboratory. When you make a new
compound, you need to determine its formula by finding
the relative amounts of elements in the compound.
The relative amounts are expressed as the percent
composition, the percent by mass of each element in a
compound.
32. There are as many percent values as there are elements in
the compound.
The percentages must add up to 100%.
% mass of element X =
grams of element X
grams of compound
x 100%
Example:
An 8.20-g piece of magnesium combines with a
5.40-g sample of oxygen completely to form a
compound. What is the percent composition of
this compound?
33. 1. Find mass of compound.
13.60 g = mass of compound (8.20 g + 5.40 g)
2. Find % of each element
% Mg =
mass Mg
mass cmpd.
=
8.20 g
13.6 g
= 60.3%
% O =
mass O
mass cmpd.
=
5.40 g
13.6 g
= 39.7 %
34. Once you determine the percent composition of a
compound you can determine the number of grams of an
element in a specific amount of compound.
Example:
Calculate the mass of carbon in 82.0 g of propane,
C3H8.
1. Determine % composition of C3H8.
C3H8 = 44.0 g
C:
36 g
44 g
= 81.8 %
H:
8 g
44 g
= 18.2 % H
35. 2. Use conversion factor based on percent by mass
of carbon in ethane.
a. 81.8 % C means that for every 100 g
C3H8, 81.8 g will be C.
82 g C3H8 x
81.8 g C
100 g C3H8
= 67.1 g C
Check to see if 67.1/82 = 81.8 %
36. Problems:
Calculate the amount of hydrogen in:
a. 350 g C2H6.
b. 20.2 g NaHSO4
c. 124 g Ca(C2H3O2) 2
d. 378 g HCN
e. 100 g H2O
37. Empirical Formulas
Once you make a new compound in the laboratory, you
can determine the percent composition information. Once
you know the percent composition, you can determine the
empirical formula of the compound.
The empirical formula gives the lowest whole number
ratio of the atoms of the elements in a compound.
CO2 is an empirical formula because it is the lowest
whole-number ratio. N2H4 (an explosive) has an empirical
formula of NH2.
38. What is the empirical formula of a compound that is
25.9% N and 74.1% O?
1. Remember % composition means that in 100 g
of that compound each % equals that many
grams.
2. Change g to moles
25.9 g N x
1 mol N
14.0 g N
= 1.85 mol N
74.1 g O x
1 mol O
16.0 g O
= 4.63 mol O
N1.85O4.63 = mole ratio
Not empirical formula because needs
to be whole-numbers.
39. 3. Divide both molar values by smallest
value to give you a “1” for element with
smallest value.
1.85 mol N
1.85
= 1 mol N
4.63 mol O
1.85
= 2.50 mol O
Is N1O2.5 correct? No, not a whole number.
Just multiply both values by a number to make a
whole number.
1 x 2 = 2 mol N; 2.50 x 2 = 5 mol O
Now you have whole numbers.
empirical formula: N2O5
40. If grams are already given to you, just convert to moles.
Example:
Analysis of a compound indicates it contains 2.08 g K,
1.40 g Cr, and 1.74 g O. Find its empirical formula.
2.08 g K x
1 mol K
39.1 g K
= .053 mol K
1.40 g Cr x
1 mol Cr
52 g Cr
= .027 mol Cr
1.74 g O x
1 mol O
16.00 g O
= .109 mol O
41. Then divide by smallest mole number to get mole ratio.
Multiply if you need to.
42. Molecular Formula
Determining the empirical formula does not always tell
you the actual molecular formula.
An example is methanol and glucose.
CH2O = methanol (empirical and molecular)
C6H12O6 = glucose (molecular)
Same empirical; different molecular formula.
Well, then, how do you know if you have empirical or
molecular?
You need to know the molar mass of the compound.
43. The molecular formula is some multiple of the empirical
formula based on their masses.
(simplest formula)x = molecular formula,
where “x” = whole-number multiple
(simplest-formula mass)x = molecular-formula mass
44. Example:
The simplest formula of a compound containing
phosphorus and oxygen was found to be P2O5. The
molar mass of this compound is 283.889 g/mol. What
is the molecular formula of this compound?
(simplest-formula mass)x = molecular-formula mass
x =
molecular-formula mass
simplest-formula mass
=
283.889 g/mol
141.945 g/mol
= 1.999
(P2O5)2 = molecular formula
= P4O10