The document contains a 14 question multiple choice test on topics in civil engineering. The questions cover topics such as limits, probability, differential equations, mechanics, materials, soils, hydrology, and hydraulics. For each question there are 4 possible answer choices labeled A, B, C, or D.
M A T E R I A L S C I E N C E F O R C H E M I C A L E N G I N E E R I N G J ...guest3f9c6b
This document contains 8 questions related to material science for a chemical engineering exam. The questions cover topics such as crystal structures, dislocations, solid solutions, phase transformations, and the mechanical properties of metals. Some questions have multiple parts asking students to calculate properties of crystal structures, explain concepts in material deformation and failure, derive expressions, or interpret phase diagrams. The exam tests students' understanding of fundamental materials science principles as well as their ability to apply this knowledge to solve quantitative and qualitative problems.
This document provides instructions and questions for a final examination in electromagnetic field theory. It consists of 5 questions testing concepts such as electric and magnetic fields, Maxwell's equations, boundary conditions, wave propagation, and vector calculus identities. The examination is for a course taught in the 2009/2010 semester and covers topics including electrostatics, magnetostatics, and time-varying fields. Students have 2 hours and 30 minutes to answer 4 out of the 5 questions.
This document contains a sample exam question paper for the GATE 2010 exam in Electronics and Communication Engineering. It includes 13 multiple choice questions related to topics like properties of matrices, Fourier series, differential equations, electrical circuits, transistors, CMOS technology, logic gates, and computer architecture. The questions are from different areas of electronics and communication engineering and assess concepts as well as calculations.
Module 13 Gradient And Area Under A Graphguestcc333c
1) The document provides examples and questions related to calculating gradient, area under graphs, speed, velocity, and distance from speed-time and distance-time graphs.
2) It includes 10 multi-part questions testing concepts like calculating rate of change of speed, uniform speed, total distance, meeting time, and average speed.
3) Detailed step-by-step answers are provided for each question at the end to demonstrate how to apply the concepts to calculate the requested values.
Introduction to chemical engineering Jntu Model Paper{Www.Studentyogi.Com}guest3f9c6b
This document contains questions from an Introduction to Chemical Engineering exam. It includes questions on various chemical engineering topics like:
- Dimensional analysis and significance of dimensionless numbers
- Psychrometrics and humidity calculations
- Fluid flow concepts like one dimensional and three dimensional flow
- Heat transfer concepts like log mean temperature and area
- Mass transfer processes like diffusion, absorption and distillation
- Reactor types like packed bed and fluidized bed reactors
The document provides four sets of questions with varying levels of difficulty on fundamental chemical engineering principles and unit operations. Students would need to answer five questions out of the eight provided in each set within the allotted time of three hours.
Engineering Physics Jntu Model Paper{Www.Studentyogi.Com}guest3f9c6b
This document contains information about an engineering physics exam for a Bachelor of Technology program. It lists 8 questions that students could answer, with each question having 3 parts. The questions cover topics in engineering physics including interference of light, architectural acoustics, ferromagnetism, crystal structures, lasers, optical fibers, lattice vibrations in solids, and transmission electron microscopy. The exam is 3 hours long and worth a total of 80 marks. Students must answer any 5 of the 8 questions on the exam.
A Novel Solution Of Linear CongruencesJeffrey Gold
This document presents a novel method for solving linear congruences of the form cx ≡ a (mod b) using remodulization. The key steps are:
1) Remodulize the congruence by factor c to obtain an equivalent congruence with modulus that is a multiple of c.
2) One of the residues in the remodulized form will be divisible by c and yield the solution.
3) The solution space consists of d distinct solutions if gcd(c,b)=d and d divides a.
4) The general solution is given by x ≡ (1 - φ(c)/b)−1a (mod b) where φ is the Euler
M A S S T R A N S F E R O P E R A T I O N S I J N T U M O D E L P A P E...guest3f9c6b
This document contains questions from a Mass Transfer Operations exam. It includes 8 questions related to various mass transfer topics like classification of mass transfer operations, diffusion, distillation design, and mass transfer correlations. The questions involve calculations related to diffusion rates, mass transfer coefficients, distillation column design parameters, and phase equilibrium data.
M A T E R I A L S C I E N C E F O R C H E M I C A L E N G I N E E R I N G J ...guest3f9c6b
This document contains 8 questions related to material science for a chemical engineering exam. The questions cover topics such as crystal structures, dislocations, solid solutions, phase transformations, and the mechanical properties of metals. Some questions have multiple parts asking students to calculate properties of crystal structures, explain concepts in material deformation and failure, derive expressions, or interpret phase diagrams. The exam tests students' understanding of fundamental materials science principles as well as their ability to apply this knowledge to solve quantitative and qualitative problems.
This document provides instructions and questions for a final examination in electromagnetic field theory. It consists of 5 questions testing concepts such as electric and magnetic fields, Maxwell's equations, boundary conditions, wave propagation, and vector calculus identities. The examination is for a course taught in the 2009/2010 semester and covers topics including electrostatics, magnetostatics, and time-varying fields. Students have 2 hours and 30 minutes to answer 4 out of the 5 questions.
This document contains a sample exam question paper for the GATE 2010 exam in Electronics and Communication Engineering. It includes 13 multiple choice questions related to topics like properties of matrices, Fourier series, differential equations, electrical circuits, transistors, CMOS technology, logic gates, and computer architecture. The questions are from different areas of electronics and communication engineering and assess concepts as well as calculations.
Module 13 Gradient And Area Under A Graphguestcc333c
1) The document provides examples and questions related to calculating gradient, area under graphs, speed, velocity, and distance from speed-time and distance-time graphs.
2) It includes 10 multi-part questions testing concepts like calculating rate of change of speed, uniform speed, total distance, meeting time, and average speed.
3) Detailed step-by-step answers are provided for each question at the end to demonstrate how to apply the concepts to calculate the requested values.
Introduction to chemical engineering Jntu Model Paper{Www.Studentyogi.Com}guest3f9c6b
This document contains questions from an Introduction to Chemical Engineering exam. It includes questions on various chemical engineering topics like:
- Dimensional analysis and significance of dimensionless numbers
- Psychrometrics and humidity calculations
- Fluid flow concepts like one dimensional and three dimensional flow
- Heat transfer concepts like log mean temperature and area
- Mass transfer processes like diffusion, absorption and distillation
- Reactor types like packed bed and fluidized bed reactors
The document provides four sets of questions with varying levels of difficulty on fundamental chemical engineering principles and unit operations. Students would need to answer five questions out of the eight provided in each set within the allotted time of three hours.
Engineering Physics Jntu Model Paper{Www.Studentyogi.Com}guest3f9c6b
This document contains information about an engineering physics exam for a Bachelor of Technology program. It lists 8 questions that students could answer, with each question having 3 parts. The questions cover topics in engineering physics including interference of light, architectural acoustics, ferromagnetism, crystal structures, lasers, optical fibers, lattice vibrations in solids, and transmission electron microscopy. The exam is 3 hours long and worth a total of 80 marks. Students must answer any 5 of the 8 questions on the exam.
A Novel Solution Of Linear CongruencesJeffrey Gold
This document presents a novel method for solving linear congruences of the form cx ≡ a (mod b) using remodulization. The key steps are:
1) Remodulize the congruence by factor c to obtain an equivalent congruence with modulus that is a multiple of c.
2) One of the residues in the remodulized form will be divisible by c and yield the solution.
3) The solution space consists of d distinct solutions if gcd(c,b)=d and d divides a.
4) The general solution is given by x ≡ (1 - φ(c)/b)−1a (mod b) where φ is the Euler
M A S S T R A N S F E R O P E R A T I O N S I J N T U M O D E L P A P E...guest3f9c6b
This document contains questions from a Mass Transfer Operations exam. It includes 8 questions related to various mass transfer topics like classification of mass transfer operations, diffusion, distillation design, and mass transfer correlations. The questions involve calculations related to diffusion rates, mass transfer coefficients, distillation column design parameters, and phase equilibrium data.
This document contains information about chemical bonding and molecular geometry:
1) It discusses different types of bonding including ionic bonds, covalent bonds, and hydrogen bonding. Bond angles are given for NH3 and NH4+.
2) Molecular formulas and charges are provided for the compounds WY and XZ2.
3) The intermolecular forces present in CH3Cl, CH4, and CH3OH are identified as dipole-dipole attractions, van der Waals forces, and hydrogen bonding respectively.
4) The solubility of C4H10, C2H5Cl, (CH3)2CO, and C3H7OH in water is explained in
This document contains solutions to chemistry questions from the IIT-JEE 2009 exam. It includes multiple choice, matrix match, and integer answer questions covering topics like thermodynamics, organic chemistry reactions, and coordination compounds. The questions assess understanding of concepts like reaction mechanisms, isomerism, redox potentials, and calorimetry calculations.
This document presents a new modified F-expansion method to obtain traveling wave solutions of the Benjamin-Bona-Mahony (BBM) equation and modified BBM equation. The method is applied to these nonlinear partial differential equations. Specifically:
1) The traveling wave solutions of the BBM equation are considered by substituting a transformation.
2) The solution is assumed to have the form of a polynomial in F(ξ) and its derivatives, where F(ξ) satisfies a Riccati equation.
3) Three explicit solutions for the BBM equation are obtained in terms of hyperbolic and trigonometric functions.
This document contains solutions to chemistry questions from the IIT-JEE 2009 exam. It provides the questions, explanations of the correct answers, and in some cases diagrams. The questions cover topics like electrolytes, isotopes, acid strength, IUPAC naming, gas laws, intermolecular forces, chemical reactions, isomerism, and defects in solids.
Engineering Chemistry 1 Jntu Model Paper{Www.Studentyogi.Com}guest3f9c6b
This document appears to contain an exam for an Engineering Chemistry course, with 8 multi-part questions covering various topics in chemistry. It provides the exam code, date, course details, instructions to answer 5 of the 8 questions, and then lists the 8 questions which cover topics such as water analysis, corrosion, fuels, polymers, lubrication, and refractories. Each question has between 2-4 parts requiring explanations of concepts, processes, comparisons, or calculations.
05212201 C A L I B R A T I O N A N D E L E C T R O N I C M E A S U R E ...guestd436758
This document contains information about an exam for a calibration and electronic measurements course, including 8 multiple choice questions. Question 1 involves calculating statistics like mean, standard deviation, and error from a set of voltage measurements. Question 2 defines SI units for conductance, magnetic flux, flux density, and inductance, and calculates flux density given magnetic flux. Question 3 provides short note questions on topics like testing, calibration, reliability, and traceability.
An O(log^2 k)-approximation algorithm for k-vertex connected spanning subgraphlbundit
The algorithm finds a low-cost survivable network using a technique called covering fragments. It starts with connectivity of 1 and incrementally increases the connectivity by covering fragments. The algorithm works as follows:
1. It identifies small fragments called cores and the halo-sets containing each core.
2. It adds edges to cover all fragments in the halo-set of each core. This decreases the number of cores by at least half in each iteration.
3. The algorithm repeats until no cores remain, indicating the network is survivable.
The analysis shows that each iteration decreases the number of cores by half while paying cost of at most 4 times the optimal. Therefore, the overall approximation ratio is O(
1) The document contains an exam for engineering chemistry with multiple choice and long answer questions.
2) Questions cover topics like batteries, fuel cells, corrosion, electrochemistry, and polymers.
3) Students are instructed to answer 5 full questions by choosing at least 2 from each part, and to answer objective questions on a separate OMR sheet.
11903 Electromagnetic Waves And Transmission Linesguestd436758
This document contains information about an electromagnetic waves and transmission lines exam for a fourth semester engineering course. It includes 8 questions covering topics like Maxwell's equations, electric and magnetic fields, wave propagation, transmission lines, and waveguides. Students were instructed to answer any 5 of the 8 questions in the exam, which would be graded out of 80 total marks. The questions involve both theoretical concepts and calculations.
The document summarizes a lecture on packet routing algorithms for hypercubes, including analyzing the expected time for a random routing algorithm to route packets from source to destination in two phases. It then discusses primal-dual algorithms for solving multi-commodity flow problems on networks and how they maintain constraints for both the primal and dual optimization problems through an iterative process of adjusting primal and dual variables.
The document presents a modal analysis of a new type of non-conventional optical waveguide with a trapezoidal cross-section and metallic cladding. It derives the characteristic equations using Goell's point matching method under the weak-guidance approximation. It obtains the dispersion curves for different cases of the proposed trapezoidal waveguide and compares them to those of a standard square waveguide with metallic cladding. The analysis shows that distorting a square waveguide into a trapezoidal shape with metallic cladding shifts the lowest cut-off value to a higher value and increases the number of modes.
The document contains 30 multiple choice questions related to mathematics. The questions cover a range of topics including algebra, geometry, trigonometry, calculus, and probability. Each question is followed by 4 possible answer choices.
Ringkasan dokumen tersebut adalah:
Riset ini bertujuan untuk mengevaluasi dampak bahan pelatihan In-Service Learning 1 PPCKS terhadap pelaksanaan tugas kepala sekolah pemula melalui survei 250 kepala sekolah dan wawancara mendalam 50 kepala sekolah. Hasil riset diharapkan dapat merevisi bahan pelatihan untuk meningkatkan kompetensi calon kepala sekolah.
The document discusses the company's plans to launch a new line of smart home devices next year. It details three new products - a smart speaker, smart thermostat, and smart door lock - that will be introduced at CES and available for purchase in early 2023. The smart speaker will respond to voice commands and allow hands-free control of other smart devices throughout the home.
This document contains 69 multiple choice questions from various topics including mathematics, probability, geometry and more. The questions range in difficulty and cover concepts such as sums, ratios, percentages, coordinate geometry and other topics. The correct answers to each question are provided as options a, b, c or d.
Evaluasi pelaksanaan Piloting 74 + 5 Kab/Kota yang dibiayai oleh SSQ-AusAID. Hasil evaluasi ini menghasilkan sejumlah rekomendasi perbaikan Sistem PPCKS dan sudah ditindaklanjuti dengan merevisi Juklak dan Juknis PPCKS
The document provides guidance on creating a long range plan (LRP) for teaching. It outlines 5 steps to develop an LRP: 1) selecting a topic, 2) creating objectives, 3) developing content, 4) creating procedures for teaching and learning experiences, and 5) evaluating effectiveness. The LRP should set goals and objectives, include engaging content and activities, and be flexible based on children's needs.
Hasil focus group discussion (FGD) mengenai dampak modul pelatihan kepala sekolah pemula (PPCKS) menunjukkan bahwa materi penyusunan rencana kerja sekolah, pengelolaan tenaga kependidikan, dan pengelolaan peserta didik dinilai paling bermanfaat. Sementara itu, materi yang perlu perbaikan struktur dan isinya antara lain pengelolaan sarana prasarana, keuangan, dan pemanfaatan TIK. Grafik yang disajikan menggambarkan
Google Shopping conversions are up to 2x higher than traditional search conversions. As a result, cost per clicks have continued to grow for Google Shopping while stabilizing for traditional search. Advertisers are bidding aggressively for Google Shopping placements since the revenue from clicks is 74% higher compared to traditional search. Shopping also generates 39% more revenue for Google than text ads alone on product pages. New bidding strategies are needed for Shopping to maximize bottom line profitability given differences in traffic and revenue reactions to bid changes.
This document contains information about chemical bonding and molecular geometry:
1) It discusses different types of bonding including ionic bonds, covalent bonds, and hydrogen bonding. Bond angles are given for NH3 and NH4+.
2) Molecular formulas and charges are provided for the compounds WY and XZ2.
3) The intermolecular forces present in CH3Cl, CH4, and CH3OH are identified as dipole-dipole attractions, van der Waals forces, and hydrogen bonding respectively.
4) The solubility of C4H10, C2H5Cl, (CH3)2CO, and C3H7OH in water is explained in
This document contains solutions to chemistry questions from the IIT-JEE 2009 exam. It includes multiple choice, matrix match, and integer answer questions covering topics like thermodynamics, organic chemistry reactions, and coordination compounds. The questions assess understanding of concepts like reaction mechanisms, isomerism, redox potentials, and calorimetry calculations.
This document presents a new modified F-expansion method to obtain traveling wave solutions of the Benjamin-Bona-Mahony (BBM) equation and modified BBM equation. The method is applied to these nonlinear partial differential equations. Specifically:
1) The traveling wave solutions of the BBM equation are considered by substituting a transformation.
2) The solution is assumed to have the form of a polynomial in F(ξ) and its derivatives, where F(ξ) satisfies a Riccati equation.
3) Three explicit solutions for the BBM equation are obtained in terms of hyperbolic and trigonometric functions.
This document contains solutions to chemistry questions from the IIT-JEE 2009 exam. It provides the questions, explanations of the correct answers, and in some cases diagrams. The questions cover topics like electrolytes, isotopes, acid strength, IUPAC naming, gas laws, intermolecular forces, chemical reactions, isomerism, and defects in solids.
Engineering Chemistry 1 Jntu Model Paper{Www.Studentyogi.Com}guest3f9c6b
This document appears to contain an exam for an Engineering Chemistry course, with 8 multi-part questions covering various topics in chemistry. It provides the exam code, date, course details, instructions to answer 5 of the 8 questions, and then lists the 8 questions which cover topics such as water analysis, corrosion, fuels, polymers, lubrication, and refractories. Each question has between 2-4 parts requiring explanations of concepts, processes, comparisons, or calculations.
05212201 C A L I B R A T I O N A N D E L E C T R O N I C M E A S U R E ...guestd436758
This document contains information about an exam for a calibration and electronic measurements course, including 8 multiple choice questions. Question 1 involves calculating statistics like mean, standard deviation, and error from a set of voltage measurements. Question 2 defines SI units for conductance, magnetic flux, flux density, and inductance, and calculates flux density given magnetic flux. Question 3 provides short note questions on topics like testing, calibration, reliability, and traceability.
An O(log^2 k)-approximation algorithm for k-vertex connected spanning subgraphlbundit
The algorithm finds a low-cost survivable network using a technique called covering fragments. It starts with connectivity of 1 and incrementally increases the connectivity by covering fragments. The algorithm works as follows:
1. It identifies small fragments called cores and the halo-sets containing each core.
2. It adds edges to cover all fragments in the halo-set of each core. This decreases the number of cores by at least half in each iteration.
3. The algorithm repeats until no cores remain, indicating the network is survivable.
The analysis shows that each iteration decreases the number of cores by half while paying cost of at most 4 times the optimal. Therefore, the overall approximation ratio is O(
1) The document contains an exam for engineering chemistry with multiple choice and long answer questions.
2) Questions cover topics like batteries, fuel cells, corrosion, electrochemistry, and polymers.
3) Students are instructed to answer 5 full questions by choosing at least 2 from each part, and to answer objective questions on a separate OMR sheet.
11903 Electromagnetic Waves And Transmission Linesguestd436758
This document contains information about an electromagnetic waves and transmission lines exam for a fourth semester engineering course. It includes 8 questions covering topics like Maxwell's equations, electric and magnetic fields, wave propagation, transmission lines, and waveguides. Students were instructed to answer any 5 of the 8 questions in the exam, which would be graded out of 80 total marks. The questions involve both theoretical concepts and calculations.
The document summarizes a lecture on packet routing algorithms for hypercubes, including analyzing the expected time for a random routing algorithm to route packets from source to destination in two phases. It then discusses primal-dual algorithms for solving multi-commodity flow problems on networks and how they maintain constraints for both the primal and dual optimization problems through an iterative process of adjusting primal and dual variables.
The document presents a modal analysis of a new type of non-conventional optical waveguide with a trapezoidal cross-section and metallic cladding. It derives the characteristic equations using Goell's point matching method under the weak-guidance approximation. It obtains the dispersion curves for different cases of the proposed trapezoidal waveguide and compares them to those of a standard square waveguide with metallic cladding. The analysis shows that distorting a square waveguide into a trapezoidal shape with metallic cladding shifts the lowest cut-off value to a higher value and increases the number of modes.
The document contains 30 multiple choice questions related to mathematics. The questions cover a range of topics including algebra, geometry, trigonometry, calculus, and probability. Each question is followed by 4 possible answer choices.
Ringkasan dokumen tersebut adalah:
Riset ini bertujuan untuk mengevaluasi dampak bahan pelatihan In-Service Learning 1 PPCKS terhadap pelaksanaan tugas kepala sekolah pemula melalui survei 250 kepala sekolah dan wawancara mendalam 50 kepala sekolah. Hasil riset diharapkan dapat merevisi bahan pelatihan untuk meningkatkan kompetensi calon kepala sekolah.
The document discusses the company's plans to launch a new line of smart home devices next year. It details three new products - a smart speaker, smart thermostat, and smart door lock - that will be introduced at CES and available for purchase in early 2023. The smart speaker will respond to voice commands and allow hands-free control of other smart devices throughout the home.
This document contains 69 multiple choice questions from various topics including mathematics, probability, geometry and more. The questions range in difficulty and cover concepts such as sums, ratios, percentages, coordinate geometry and other topics. The correct answers to each question are provided as options a, b, c or d.
Evaluasi pelaksanaan Piloting 74 + 5 Kab/Kota yang dibiayai oleh SSQ-AusAID. Hasil evaluasi ini menghasilkan sejumlah rekomendasi perbaikan Sistem PPCKS dan sudah ditindaklanjuti dengan merevisi Juklak dan Juknis PPCKS
The document provides guidance on creating a long range plan (LRP) for teaching. It outlines 5 steps to develop an LRP: 1) selecting a topic, 2) creating objectives, 3) developing content, 4) creating procedures for teaching and learning experiences, and 5) evaluating effectiveness. The LRP should set goals and objectives, include engaging content and activities, and be flexible based on children's needs.
Hasil focus group discussion (FGD) mengenai dampak modul pelatihan kepala sekolah pemula (PPCKS) menunjukkan bahwa materi penyusunan rencana kerja sekolah, pengelolaan tenaga kependidikan, dan pengelolaan peserta didik dinilai paling bermanfaat. Sementara itu, materi yang perlu perbaikan struktur dan isinya antara lain pengelolaan sarana prasarana, keuangan, dan pemanfaatan TIK. Grafik yang disajikan menggambarkan
Google Shopping conversions are up to 2x higher than traditional search conversions. As a result, cost per clicks have continued to grow for Google Shopping while stabilizing for traditional search. Advertisers are bidding aggressively for Google Shopping placements since the revenue from clicks is 74% higher compared to traditional search. Shopping also generates 39% more revenue for Google than text ads alone on product pages. New bidding strategies are needed for Shopping to maximize bottom line profitability given differences in traffic and revenue reactions to bid changes.
Pengantar kegiatan penyusunan proyeksi kebutuhan kepala sekolah di 12 kab/kota daerah implementasi yang dibiayai apbn tahun 2014. Kegiatan dilaksanakan di LPPKS.
Program penyiapan calon kepala sekolah meliputi proses seleksi, pelatihan, dan sertifikasi untuk memastikan calon memiliki kompetensi kepemimpinan sebagai kepala sekolah sesuai standar yang ditetapkan.
SMX London – Reverse Engineering Google ShoppingCrealytics
Reverse Engineering Google Shopping
Google Shopping delivers great results, but many AdWords advertisers haven't found ways to differentiate themselves from the competition. So how to escape from mediocrity?
We setup tests, analysed data from Shopping Campaigns across the globe and will provide our results and actionable insights within these slide:
1. How does bidding impact the click volume, search query impressions, traffic quality and ROI?
2. How do Google Shopping campaign priorities influence your performance?
3. Should you really spend time optimising product descriptions in your feed?
4. How important is the correct categorisation of your products (Google Product Category) in the feed?
5. How does Shopping react when you rewrite your product titles?
Enjoy!
Dokumen ini merangkum penutupan pelatihan Master Trainer dan Asesor PPCKS yang diselenggarakan oleh LPPKS Indonesia pada 16 Februari 2014. Dokumen ini juga menyoroti visi dan misi LPPKS, tantangan untuk meningkatkan implementasi PPCKS di seluruh Kabupaten/Kota di Indonesia, serta tugas Master Trainer dan Asesor untuk terus meningkatkan kapasitas diri mereka dalam mendukung program PPCKS.
The document discusses a report from a committee on developing instruments for school principal assessment (PPK). It provides background on the assessors for PPK, which number over 3,000 people produced by LPPKS and LPMP, with about 10% having previous assessment experience. It also discusses estimates of assessors' experience levels, the need for professional judgment standards, assessment calibration efforts, and plans for refresher and development training involving national and regional assessors, school principals, and responses to scenarios.
This document provides the GATE question paper from 2010 for the Civil Engineering exam. It contains 51 questions in total, with questions 1-25 carrying 1 mark each and questions 26-51 carrying 2 marks each. The questions cover topics in mathematics, structural analysis, geotechnical engineering, water resources engineering, transportation engineering, and environmental engineering. Sample questions assess knowledge of limits, probability, differential equations, bending moments, soil classification, flow in channels, traffic signs, and noise pollution standards. The document is a source of past exam questions to help civil engineering students prepare for the GATE exam.
The document contains 8 multiple choice questions related to engineering concepts. Question 1 asks about the definition of a skew symmetric matrix. Question 2 asks about calculating the gradient of a scalar function. Question 3 asks about the singularities of an analytic function. Question 4 asks about calculating hoop stress in a cylindrical pressure vessel. Question 5 asks about the modulus of rupture of concrete related to its compressive strength. Question 6 asks about the term used for the ratio of plastic moment to yield moment in plastic bending theory. Question 7 asks about partial safety factors for design strength of concrete and reinforcing steel. Question 8 asks about the point through which the resultant of external loading must pass to ensure pure bending without twisting.
Vidyamandir Classes provides practice tests to help students prepare for the AIEEE exam. This document describes a practice test from 2012 that covers physics, chemistry, and mathematics. It provides instructions for taking the test, which contains 90 multiple-choice questions across three sections. The test is designed to help students practice for the AIEEE exam, which evaluates students' preparedness for admission to engineering colleges in India.
The document is a sample physics test with multiple choice and numerical questions covering various physics topics. It contains 8 objective questions, 4 reasoning questions, and 2 passages with 4 questions each related to the passages. It also includes 2 matrix matching questions and 2 numerical/subjective questions requiring numeric answers. The test examines concepts in mechanics, thermodynamics, electromagnetism, and other core areas of physics.
This document contains 8 multiple choice questions related to engineering topics such as matrices, functions, pressure vessels, concrete strength, plastic bending of beams, and loading on beams. The questions cover concepts like skew symmetric matrices, gradients of scalar functions, singularities of analytic functions, hoop stress in thin walled pressure vessels, modulus of rupture of concrete, plastic section modulus, partial safety factors for design strength, and resultant loading for pure bending.
1. The decimal expansion of π is non-terminating and recurring.
2. If one diagonal of a trapezium divides the other in the ratio 1:3, then one of the parallel sides is three times the other.
3. The mode of the data with classes 50-60, 60-70, 70-80, 80-90, 90-100 and frequencies 9, 12, 20, 11, 10 respectively is 70-80.
This document contains a sample question paper for the GATE 2016 General Aptitude Test. It consists of 10 multiple choice questions in the first section carrying 1 mark each. The topics covered include English grammar, data interpretation, mathematical word problems and logic. The second section contains 5 more complex questions carrying 2 marks each related to data analysis, logical reasoning and mathematics. Sample questions on topics like interest rates, logical inferences, sets and geometry are given. The paper is aimed at testing candidates' general aptitude and logical thinking abilities.
(Www.entrance exam.net)-gate civil engineering sample paper 4gulaaab
This document appears to be a past paper for the GATE (Graduate Aptitude Test in Engineering) exam in Civil Engineering from 2007. It contains 75 multiple choice questions testing various topics in civil engineering, including structural analysis, geotechnical engineering, transportation engineering, environmental engineering, and construction materials. The questions range from basic definitions and calculations to more complex problems involving matrices, differential equations, stress analysis, fluid mechanics, and other topics.
At Apex Institute, we endeavour to amalgamate the ancient values of uttermost dedication and responsibility that gave teaching a very pious and sacred status, with latest teaching methodologies so as to make the act of learning, a delectable experience. The arduous task is accomplished by a team of diligent academicians and entrepreneurs, who with the years of experience have mastered the techniques to transform even the most abstruse topics easy to comprehend.
Great emphasis is laid on the concepts and fundamentals with a smooth and systematic transition to the advanced levels of teaching. The interaction between students and teachers is always encouraged so as to provide a very healthy environment for growth and learning. During the process of training the students for IIT-JEE/Engg./Medical entrance examinations, great emphasis is laid on the fundamentals so as to excel in the CBSE examination also.
Illustrious faculty and excellent teaching techniques provide you will an infallible approach to success only at Apex Institute.
Our Mission
Generating excellence both in academic and competitive aspects thereby training the youth for most gruelling entrance level exams viz. IIT-JEE/Engg.& Medical entrance.
Our Vision
Generating excellence in academic, exploring creative areas of the dormant self, nurturing talent & aptitude & including perseverance among the students to keep themselves abreast of the latest developments in the field of competitive examinations.
Our Objectives
1. Striving for the best possible education to ambitious students aspiring to join corporate world as medical professionals.
2. Creating a comprehensive understanding of the subjects & help developing strategies to meet arduous competitions among the students to match, excel & ameliorate the competition oriented education.
1) The document contains a sample question paper for the GATE 2018 General Aptitude exam, with 10 multiple choice questions covering topics like English grammar, mathematics, data interpretation, and logical reasoning.
2) The questions are either single mark or two mark questions.
3) The paper tests concepts like filling blanks in sentences, number patterns, ratios, data interpretation, and logical inferences.
The document contains 50 multiple choice questions testing mathematical concepts such as algebra, geometry, statistics, and trigonometry. The questions cover a wide range of topics including: simplifying expressions, solving equations, finding values based on graphs/tables, properties of shapes, percentages, and probability.
The document is a sample question paper containing multiple choice questions from the GATE 2016 exam in general aptitude and production engineering. It contains 10 single mark questions and 10 two mark questions covering topics like algebra, calculus, probability, mechanics, materials science, manufacturing processes, thermodynamics etc. The paper tests concepts fundamental to engineering and their application to solve numerical problems.
This document provides information about a 60-minute exam containing 20 multiple choice questions testing various physics concepts. The exam is divided into 4 sections. Section I contains 4 single-answer multiple choice questions worth 3 marks each. Section II contains 5 multi-answer multiple choice questions worth 4 marks each. Section III contains 3 passages of 2 questions each based on the passage. Section IV contains 2 matrix-matching questions worth 2 marks each for correct matches. The total marks for the exam are 80.
This document provides instructions for a 120-minute, 120 multiple choice question civil engineering exam. Each question has 4 answer choices marked A, B, C or D. Questions carry 1 mark each and there are no penalties for wrong answers. The booklet contains 16 pages and candidates should notify the invigilator if any pages are missing or defective. Answers must be marked on the OMR answer sheet using a blue or black pen as per the instructions on the sheet. The answer sheet must be returned to the invigilator before leaving the exam hall. Calculators and mobile devices are not allowed. No pages should be detached from the booklet, and the seal should only be opened after an instruction is given.
This document contains instructions for a 120-minute, 120 multiple choice question exam with questions about nano technology. Each question has 4 answer choices and carries 1 mark. There are no negative marks for wrong answers. Candidates should fill out answers on the provided OMR answer sheet using a blue or black pen. Calculators and electronic devices are not allowed. The exam booklet should not be detached or damaged.
This document contains instructions for a 120-question multiple choice exam to be completed in 120 minutes. Each question has 4 answer choices marked A, B, C or D. Questions must be answered on the provided OMR answer sheet using a blue or black ballpoint pen. The OMR sheet and sealed booklet should be returned to the invigilator after the exam. Calculators and electronic devices are not allowed.
This is GATE 2019 mechanical question paper. The answer key is available at https://prepare.prepleaf.com. For more such content visit- https://www.prepleaf.com.
Multiple Choice Questions for GATE 2015CIVILENGINEERING
Topic wise questions
Prepared by Expert Team, Department of Civil Engineering, MIT Moradabad
-akbansal288@gmail.com
-kumarpradeepbit@gmail.com
This document appears to be a practice test containing 50 multiple choice questions related to various topics in electronics and communication engineering. The questions cover topics like flip-flops, memory addressing, Boolean logic, transistors, diodes, modulation, communications systems, transforms, and data interpretation. The full answer key is not provided.
Dear Students/Parents
We at 'Apex Institute' are committed to provide our students best quality education with ethics. Moving in this direction, we have decided that unlike other expensive and 5star facility type institutes who are huge investors and advertisers, we shall not invest huge amount of money in advertisements. It shall rather be invested on the betterment, enhancement of quality and resources at our center.
We are just looking forward to have 'word-of-mouth' publicity instead. Because, there is only a satisfied student and his/her parents can judge an institute's quality and it's faculty members coaching.
Those coaching institutes, who are investing highly on advertisements, are actually, wasting their money on it, in a sense. Rather, the money should be invested on highly experienced faculty members and on teaching gears.
We all at 'Apex' are taking this initiative to improve the quality of education along-with each student's development and growth.
Committed to excellence...
With best wishes.
S . Iqbal
( Motivator & Mentor)
This presentation was provided by Rebecca Benner, Ph.D., of the American Society of Anesthesiologists, for the second session of NISO's 2024 Training Series "DEIA in the Scholarly Landscape." Session Two: 'Expanding Pathways to Publishing Careers,' was held June 13, 2024.
Chapter wise All Notes of First year Basic Civil Engineering.pptxDenish Jangid
Chapter wise All Notes of First year Basic Civil Engineering
Syllabus
Chapter-1
Introduction to objective, scope and outcome the subject
Chapter 2
Introduction: Scope and Specialization of Civil Engineering, Role of civil Engineer in Society, Impact of infrastructural development on economy of country.
Chapter 3
Surveying: Object Principles & Types of Surveying; Site Plans, Plans & Maps; Scales & Unit of different Measurements.
Linear Measurements: Instruments used. Linear Measurement by Tape, Ranging out Survey Lines and overcoming Obstructions; Measurements on sloping ground; Tape corrections, conventional symbols. Angular Measurements: Instruments used; Introduction to Compass Surveying, Bearings and Longitude & Latitude of a Line, Introduction to total station.
Levelling: Instrument used Object of levelling, Methods of levelling in brief, and Contour maps.
Chapter 4
Buildings: Selection of site for Buildings, Layout of Building Plan, Types of buildings, Plinth area, carpet area, floor space index, Introduction to building byelaws, concept of sun light & ventilation. Components of Buildings & their functions, Basic concept of R.C.C., Introduction to types of foundation
Chapter 5
Transportation: Introduction to Transportation Engineering; Traffic and Road Safety: Types and Characteristics of Various Modes of Transportation; Various Road Traffic Signs, Causes of Accidents and Road Safety Measures.
Chapter 6
Environmental Engineering: Environmental Pollution, Environmental Acts and Regulations, Functional Concepts of Ecology, Basics of Species, Biodiversity, Ecosystem, Hydrological Cycle; Chemical Cycles: Carbon, Nitrogen & Phosphorus; Energy Flow in Ecosystems.
Water Pollution: Water Quality standards, Introduction to Treatment & Disposal of Waste Water. Reuse and Saving of Water, Rain Water Harvesting. Solid Waste Management: Classification of Solid Waste, Collection, Transportation and Disposal of Solid. Recycling of Solid Waste: Energy Recovery, Sanitary Landfill, On-Site Sanitation. Air & Noise Pollution: Primary and Secondary air pollutants, Harmful effects of Air Pollution, Control of Air Pollution. . Noise Pollution Harmful Effects of noise pollution, control of noise pollution, Global warming & Climate Change, Ozone depletion, Greenhouse effect
Text Books:
1. Palancharmy, Basic Civil Engineering, McGraw Hill publishers.
2. Satheesh Gopi, Basic Civil Engineering, Pearson Publishers.
3. Ketki Rangwala Dalal, Essentials of Civil Engineering, Charotar Publishing House.
4. BCP, Surveying volume 1
Elevate Your Nonprofit's Online Presence_ A Guide to Effective SEO Strategies...TechSoup
Whether you're new to SEO or looking to refine your existing strategies, this webinar will provide you with actionable insights and practical tips to elevate your nonprofit's online presence.
Leveraging Generative AI to Drive Nonprofit InnovationTechSoup
In this webinar, participants learned how to utilize Generative AI to streamline operations and elevate member engagement. Amazon Web Service experts provided a customer specific use cases and dived into low/no-code tools that are quick and easy to deploy through Amazon Web Service (AWS.)
Temple of Asclepius in Thrace. Excavation resultsKrassimira Luka
The temple and the sanctuary around were dedicated to Asklepios Zmidrenus. This name has been known since 1875 when an inscription dedicated to him was discovered in Rome. The inscription is dated in 227 AD and was left by soldiers originating from the city of Philippopolis (modern Plovdiv).
Gender and Mental Health - Counselling and Family Therapy Applications and In...PsychoTech Services
A proprietary approach developed by bringing together the best of learning theories from Psychology, design principles from the world of visualization, and pedagogical methods from over a decade of training experience, that enables you to: Learn better, faster!
Level 3 NCEA - NZ: A Nation In the Making 1872 - 1900 SML.pptHenry Hollis
The History of NZ 1870-1900.
Making of a Nation.
From the NZ Wars to Liberals,
Richard Seddon, George Grey,
Social Laboratory, New Zealand,
Confiscations, Kotahitanga, Kingitanga, Parliament, Suffrage, Repudiation, Economic Change, Agriculture, Gold Mining, Timber, Flax, Sheep, Dairying,
This document provides an overview of wound healing, its functions, stages, mechanisms, factors affecting it, and complications.
A wound is a break in the integrity of the skin or tissues, which may be associated with disruption of the structure and function.
Healing is the body’s response to injury in an attempt to restore normal structure and functions.
Healing can occur in two ways: Regeneration and Repair
There are 4 phases of wound healing: hemostasis, inflammation, proliferation, and remodeling. This document also describes the mechanism of wound healing. Factors that affect healing include infection, uncontrolled diabetes, poor nutrition, age, anemia, the presence of foreign bodies, etc.
Complications of wound healing like infection, hyperpigmentation of scar, contractures, and keloid formation.