The document discusses joint cost allocation methods for products from multi-output processes. It describes two main methods:
1) The sales value at splitoff method allocates joint costs based on the relative sales value of products at the splitoff point.
2) The net realizable value method allocates joint costs based on final sales value minus separable costs. The document also discusses treatment of byproducts which have relatively low sales value compared to joint products.
This is an attempt to explain the broad concept of and rationale behind Transfer Pricing Regulations. Also gives a high level view of the scheme of Indian Transfer Pricing Regulations as on date. Points out the TP controversies in India. Above all gives a well spirited guidance on dealing with TP in India.
The Cost Of Production - Dealing with Cost - Explicit and Implicit Cost - Eco...FaHaD .H. NooR
Economics #UCP
What is 'Production Cost'
Production cost refers to the cost incurred by a business when manufacturing a good or providing a service. Production costs include a variety of expenses including, but not limited to, labor, raw materials, consumable manufacturing supplies and general overhead. Additionally, any taxes levied by the government or royalties owed by natural resource extracting companies are also considered production costs.
BREAKING DOWN 'Production Cost'
Also referred to as the cost of production, production costs include expenditures relating to the manufacturing or creation of goods or services. For a cost to qualify as a production cost it must be directly tied to the generation of revenue for the company. Manufacturers experience product costs relating to both the materials required to create an item as well as the labor need to create it. Service industries experience production costs in regards to the labor required to provide the service as well as any materials costs involved in providing the aforementioned service.
In production, there are direct costs and indirect costs. For example, direct costs for manufacturing an automobile are materials such as the plastic and metal materials used as well as the labor required to produce the finished product. Indirect costs include overhead such as rent, administrative salaries or utility expenses.
Deriving Unit Costs for Product Pricing
To figure out the cost of production per unit, the cost of production is divided by the number of units produced. Once the cost per unit is determined, the information can be used to help develop an appropriate sales price for the completed item. In order to break even, the sales price must cover the cost per unit. Amounts above the cost per unit are often seen as profit while amounts below the cost per unit result in losses.
This is an attempt to explain the broad concept of and rationale behind Transfer Pricing Regulations. Also gives a high level view of the scheme of Indian Transfer Pricing Regulations as on date. Points out the TP controversies in India. Above all gives a well spirited guidance on dealing with TP in India.
The Cost Of Production - Dealing with Cost - Explicit and Implicit Cost - Eco...FaHaD .H. NooR
Economics #UCP
What is 'Production Cost'
Production cost refers to the cost incurred by a business when manufacturing a good or providing a service. Production costs include a variety of expenses including, but not limited to, labor, raw materials, consumable manufacturing supplies and general overhead. Additionally, any taxes levied by the government or royalties owed by natural resource extracting companies are also considered production costs.
BREAKING DOWN 'Production Cost'
Also referred to as the cost of production, production costs include expenditures relating to the manufacturing or creation of goods or services. For a cost to qualify as a production cost it must be directly tied to the generation of revenue for the company. Manufacturers experience product costs relating to both the materials required to create an item as well as the labor need to create it. Service industries experience production costs in regards to the labor required to provide the service as well as any materials costs involved in providing the aforementioned service.
In production, there are direct costs and indirect costs. For example, direct costs for manufacturing an automobile are materials such as the plastic and metal materials used as well as the labor required to produce the finished product. Indirect costs include overhead such as rent, administrative salaries or utility expenses.
Deriving Unit Costs for Product Pricing
To figure out the cost of production per unit, the cost of production is divided by the number of units produced. Once the cost per unit is determined, the information can be used to help develop an appropriate sales price for the completed item. In order to break even, the sales price must cover the cost per unit. Amounts above the cost per unit are often seen as profit while amounts below the cost per unit result in losses.
Cost Vs Budget PowerPoint Presentation SlidesSlideTeam
This deck consists of total of twenty slides. It has PPT slides highlighting important topics of Cost Vs Budget PowerPoint Presentation Slides. This deck comprises of amazing visuals with thoroughly researched content. Each template is well crafted and designed by our PowerPoint experts. Our designers have included all the necessary PowerPoint layouts in this deck. From icons to graphs, this PPT deck has it all. The best part is that these templates are easily customizable. Just click the DOWNLOAD button shown below. Edit the colour, text, font size, add or delete the content as per the requirement. Download this deck now and engage your audience with this ready made presentation. http://bit.ly/2vMBtbd
1Break-Even AnalysisMarketers need to understand break.docxaulasnilda
1
Break-Even Analysis
Marketers need to understand break-even
analysis because it helps them choose the
best pricing strategy and make smart
decisions about the short- and long-term
profitability of the product.
This is an analysis that tells you how many
products you need to sell to cover your costs.
Profitability
Profitability Definitions
Revenue the money we take in from sales
Cost the money it costs us to make and sell our product
Profit the money we have left over from our revenue
after we pay all of our costs
Revenue - Costs = Profit
Price the money a consumer pays for one unit of product
the money we take in from one unit of product
Price x Units = Revenue
Revenue/Units = Price
2
Exercise 1
Product
Units Sold in
August
Price per
Unit
Cost per Unit
Bulletin Board 400 $3.00 $1.00
Magnetic White Board 600 $4.00 $3.00
Combination Board 250 $5.00 $3.50
Exercise 1
1. What was Stick-It-Up’s total sales revenue in August?
2. What was Stick-It-Up’s total profit in August?
3. What product contributed the most to sales revenue in August?
What percentage of the sales revenue did it contribute?
4. What product contributed the most to profit in August? What
percentage of the profit did it contribute?
5. If sales of magnetic white boards went up by 20%, how much
more would it contribute to sales revenue? To profits?
6. Suppose that increasing sales of magnetic white boards by 20%
would cost the company $500 per month in advertising expenses.
Should they spend the $500 per month on additional advertising?
Exercise 1
What was Stick-It-Up’s total revenue in August?
Revenue from:
Bulletin Boards 400 x $3.00 $1,200.00
Magnetic White Boards 600 x $4.00 $2,400.00
Combination Boards 250 x $5.00 $1,250.00
Total Revenue $4,850.00
Product
Units Sold in
August
Price per
Unit
Cost per Unit
Bulletin Board 400 $3.00 $1.00
Magnetic White Board 600 $4.00 $3.00
Combination Board 250 $5.00 $3.50
3
Exercise 1
What was Stick-It-Up’s total profit in August?
Cost of:
Bulletin Boards 400 x $1.00 $400.00
Magnetic White Boards 600 x $3.00 $1,800.00
Combination Boards 250 x $3.50 $875.00
Total Cost $3,075.00
Profit = Total Revenue - Total Cost = $4,850 - $3,075 = $1,775
Product
Units Sold in
August
Price per
Unit
Cost per Unit
Bulletin Board 400 $3.00 $1.00
Magnetic White Board 600 $4.00 $3.00
Combination Board 250 $5.00 $3.50
Exercise 1
What was Stick-It-Up’s total profit in August?
Profit on:
Bulletin Boards 400 x ($3.00-$1.00) $800.00
Magnetic White Boards 600 x ($4.00-$3.00) $600.00
Combination Boards 250 x ($5.00-$3.50) $375.00
Total Profit $1,775.00
Product
Units Sold in
August
Price per
Unit
Cost per Unit
Bulletin Board 400 $3.00 $1.00
Magnetic White Board 600 $4.00 $3.00
Combination Board 250 $5.00 $3.50
Exercise 1
What product contributed the most to revenue in August? What
percentage did it contribute?
Bulletin Boards $1,200.00
Magnetic White Boards $2,400 ...
This PPT deck displays twentyone slides with in depth research. Our Budget Variance Powerpoint Presentation Slides presentation deck is a helpful tool to plan, prepare, document and analyse the topic with a clear approach. We provide a ready to use deck with all sorts of relevant topics subtopics templates, charts and graphs, overviews, analysis templates. Outline all the important aspects without any hassle. It showcases of all kind of editable templates infographics for an inclusive and comprehensive Budget Variance Powerpoint Presentation Slides presentation. Professionals, managers, individual and team involved in any company organization from any field can use them as per requirement.
Budget Vs Actual Variance Analysis PowerPoint Presentation SlidesSlideTeam
Enhance your audiences knowledge with this well researched complete deck. Showcase all the important features of the deck with perfect visuals. This deck comprises of total of twenty slides with each slide explained in detail. Each template comprises of professional diagrams and layouts. Our professional PowerPoint experts have also included icons, graphs and charts for your convenience. All you have to do is DOWNLOAD the deck. Make changes as per the requirement. Yes, these PPT slides are completely customizable. Edit the colour, text and font size. Add or delete the content from the slide. And leave your audience awestruck with the professionally designed Budget Vs Actual Variance Analysis Powerpoint Presentation Slides complete deck.
Actual Vs Budget Variance PowerPoint Presentation SlidesSlideTeam
This PPT deck displays twentyone slides with in depth research. Our Actual Vs Budget Variance Powerpoint Presentation Slides presentation deck is a helpful tool to plan, prepare, document and analyse the topic with a clear approach. We provide a ready to use deck with all sorts of relevant topics subtopics templates, charts and graphs, overviews, analysis templates. Outline all the important aspects without any hassle. It showcases of all kind of editable templates infographics for an inclusive and comprehensive Actual Vs Budget Variance Powerpoint Presentation Slides presentation. Professionals, managers, individual and team involved in any company organization from any field can use them as per requirement.
Buy Verified PayPal Account | Buy Google 5 Star Reviewsusawebmarket
Buy Verified PayPal Account
Looking to buy verified PayPal accounts? Discover 7 expert tips for safely purchasing a verified PayPal account in 2024. Ensure security and reliability for your transactions.
PayPal Services Features-
🟢 Email Access
🟢 Bank Added
🟢 Card Verified
🟢 Full SSN Provided
🟢 Phone Number Access
🟢 Driving License Copy
🟢 Fasted Delivery
Client Satisfaction is Our First priority. Our services is very appropriate to buy. We assume that the first-rate way to purchase our offerings is to order on the website. If you have any worry in our cooperation usually You can order us on Skype or Telegram.
24/7 Hours Reply/Please Contact
usawebmarketEmail: support@usawebmarket.com
Skype: usawebmarket
Telegram: @usawebmarket
WhatsApp: +1(218) 203-5951
USA WEB MARKET is the Best Verified PayPal, Payoneer, Cash App, Skrill, Neteller, Stripe Account and SEO, SMM Service provider.100%Satisfection granted.100% replacement Granted.
India Orthopedic Devices Market: Unlocking Growth Secrets, Trends and Develop...Kumar Satyam
According to TechSci Research report, “India Orthopedic Devices Market -Industry Size, Share, Trends, Competition Forecast & Opportunities, 2030”, the India Orthopedic Devices Market stood at USD 1,280.54 Million in 2024 and is anticipated to grow with a CAGR of 7.84% in the forecast period, 2026-2030F. The India Orthopedic Devices Market is being driven by several factors. The most prominent ones include an increase in the elderly population, who are more prone to orthopedic conditions such as osteoporosis and arthritis. Moreover, the rise in sports injuries and road accidents are also contributing to the demand for orthopedic devices. Advances in technology and the introduction of innovative implants and prosthetics have further propelled the market growth. Additionally, government initiatives aimed at improving healthcare infrastructure and the increasing prevalence of lifestyle diseases have led to an upward trend in orthopedic surgeries, thereby fueling the market demand for these devices.
More Related Content
Similar to CCOST ALLOCATION: JOINT PRODUCTS AND BYPRODUCTS
Cost Vs Budget PowerPoint Presentation SlidesSlideTeam
This deck consists of total of twenty slides. It has PPT slides highlighting important topics of Cost Vs Budget PowerPoint Presentation Slides. This deck comprises of amazing visuals with thoroughly researched content. Each template is well crafted and designed by our PowerPoint experts. Our designers have included all the necessary PowerPoint layouts in this deck. From icons to graphs, this PPT deck has it all. The best part is that these templates are easily customizable. Just click the DOWNLOAD button shown below. Edit the colour, text, font size, add or delete the content as per the requirement. Download this deck now and engage your audience with this ready made presentation. http://bit.ly/2vMBtbd
1Break-Even AnalysisMarketers need to understand break.docxaulasnilda
1
Break-Even Analysis
Marketers need to understand break-even
analysis because it helps them choose the
best pricing strategy and make smart
decisions about the short- and long-term
profitability of the product.
This is an analysis that tells you how many
products you need to sell to cover your costs.
Profitability
Profitability Definitions
Revenue the money we take in from sales
Cost the money it costs us to make and sell our product
Profit the money we have left over from our revenue
after we pay all of our costs
Revenue - Costs = Profit
Price the money a consumer pays for one unit of product
the money we take in from one unit of product
Price x Units = Revenue
Revenue/Units = Price
2
Exercise 1
Product
Units Sold in
August
Price per
Unit
Cost per Unit
Bulletin Board 400 $3.00 $1.00
Magnetic White Board 600 $4.00 $3.00
Combination Board 250 $5.00 $3.50
Exercise 1
1. What was Stick-It-Up’s total sales revenue in August?
2. What was Stick-It-Up’s total profit in August?
3. What product contributed the most to sales revenue in August?
What percentage of the sales revenue did it contribute?
4. What product contributed the most to profit in August? What
percentage of the profit did it contribute?
5. If sales of magnetic white boards went up by 20%, how much
more would it contribute to sales revenue? To profits?
6. Suppose that increasing sales of magnetic white boards by 20%
would cost the company $500 per month in advertising expenses.
Should they spend the $500 per month on additional advertising?
Exercise 1
What was Stick-It-Up’s total revenue in August?
Revenue from:
Bulletin Boards 400 x $3.00 $1,200.00
Magnetic White Boards 600 x $4.00 $2,400.00
Combination Boards 250 x $5.00 $1,250.00
Total Revenue $4,850.00
Product
Units Sold in
August
Price per
Unit
Cost per Unit
Bulletin Board 400 $3.00 $1.00
Magnetic White Board 600 $4.00 $3.00
Combination Board 250 $5.00 $3.50
3
Exercise 1
What was Stick-It-Up’s total profit in August?
Cost of:
Bulletin Boards 400 x $1.00 $400.00
Magnetic White Boards 600 x $3.00 $1,800.00
Combination Boards 250 x $3.50 $875.00
Total Cost $3,075.00
Profit = Total Revenue - Total Cost = $4,850 - $3,075 = $1,775
Product
Units Sold in
August
Price per
Unit
Cost per Unit
Bulletin Board 400 $3.00 $1.00
Magnetic White Board 600 $4.00 $3.00
Combination Board 250 $5.00 $3.50
Exercise 1
What was Stick-It-Up’s total profit in August?
Profit on:
Bulletin Boards 400 x ($3.00-$1.00) $800.00
Magnetic White Boards 600 x ($4.00-$3.00) $600.00
Combination Boards 250 x ($5.00-$3.50) $375.00
Total Profit $1,775.00
Product
Units Sold in
August
Price per
Unit
Cost per Unit
Bulletin Board 400 $3.00 $1.00
Magnetic White Board 600 $4.00 $3.00
Combination Board 250 $5.00 $3.50
Exercise 1
What product contributed the most to revenue in August? What
percentage did it contribute?
Bulletin Boards $1,200.00
Magnetic White Boards $2,400 ...
This PPT deck displays twentyone slides with in depth research. Our Budget Variance Powerpoint Presentation Slides presentation deck is a helpful tool to plan, prepare, document and analyse the topic with a clear approach. We provide a ready to use deck with all sorts of relevant topics subtopics templates, charts and graphs, overviews, analysis templates. Outline all the important aspects without any hassle. It showcases of all kind of editable templates infographics for an inclusive and comprehensive Budget Variance Powerpoint Presentation Slides presentation. Professionals, managers, individual and team involved in any company organization from any field can use them as per requirement.
Budget Vs Actual Variance Analysis PowerPoint Presentation SlidesSlideTeam
Enhance your audiences knowledge with this well researched complete deck. Showcase all the important features of the deck with perfect visuals. This deck comprises of total of twenty slides with each slide explained in detail. Each template comprises of professional diagrams and layouts. Our professional PowerPoint experts have also included icons, graphs and charts for your convenience. All you have to do is DOWNLOAD the deck. Make changes as per the requirement. Yes, these PPT slides are completely customizable. Edit the colour, text and font size. Add or delete the content from the slide. And leave your audience awestruck with the professionally designed Budget Vs Actual Variance Analysis Powerpoint Presentation Slides complete deck.
Actual Vs Budget Variance PowerPoint Presentation SlidesSlideTeam
This PPT deck displays twentyone slides with in depth research. Our Actual Vs Budget Variance Powerpoint Presentation Slides presentation deck is a helpful tool to plan, prepare, document and analyse the topic with a clear approach. We provide a ready to use deck with all sorts of relevant topics subtopics templates, charts and graphs, overviews, analysis templates. Outline all the important aspects without any hassle. It showcases of all kind of editable templates infographics for an inclusive and comprehensive Actual Vs Budget Variance Powerpoint Presentation Slides presentation. Professionals, managers, individual and team involved in any company organization from any field can use them as per requirement.
Buy Verified PayPal Account | Buy Google 5 Star Reviewsusawebmarket
Buy Verified PayPal Account
Looking to buy verified PayPal accounts? Discover 7 expert tips for safely purchasing a verified PayPal account in 2024. Ensure security and reliability for your transactions.
PayPal Services Features-
🟢 Email Access
🟢 Bank Added
🟢 Card Verified
🟢 Full SSN Provided
🟢 Phone Number Access
🟢 Driving License Copy
🟢 Fasted Delivery
Client Satisfaction is Our First priority. Our services is very appropriate to buy. We assume that the first-rate way to purchase our offerings is to order on the website. If you have any worry in our cooperation usually You can order us on Skype or Telegram.
24/7 Hours Reply/Please Contact
usawebmarketEmail: support@usawebmarket.com
Skype: usawebmarket
Telegram: @usawebmarket
WhatsApp: +1(218) 203-5951
USA WEB MARKET is the Best Verified PayPal, Payoneer, Cash App, Skrill, Neteller, Stripe Account and SEO, SMM Service provider.100%Satisfection granted.100% replacement Granted.
India Orthopedic Devices Market: Unlocking Growth Secrets, Trends and Develop...Kumar Satyam
According to TechSci Research report, “India Orthopedic Devices Market -Industry Size, Share, Trends, Competition Forecast & Opportunities, 2030”, the India Orthopedic Devices Market stood at USD 1,280.54 Million in 2024 and is anticipated to grow with a CAGR of 7.84% in the forecast period, 2026-2030F. The India Orthopedic Devices Market is being driven by several factors. The most prominent ones include an increase in the elderly population, who are more prone to orthopedic conditions such as osteoporosis and arthritis. Moreover, the rise in sports injuries and road accidents are also contributing to the demand for orthopedic devices. Advances in technology and the introduction of innovative implants and prosthetics have further propelled the market growth. Additionally, government initiatives aimed at improving healthcare infrastructure and the increasing prevalence of lifestyle diseases have led to an upward trend in orthopedic surgeries, thereby fueling the market demand for these devices.
Taurus Zodiac Sign_ Personality Traits and Sign Dates.pptxmy Pandit
Explore the world of the Taurus zodiac sign. Learn about their stability, determination, and appreciation for beauty. Discover how Taureans' grounded nature and hardworking mindset define their unique personality.
Memorandum Of Association Constitution of Company.pptseri bangash
www.seribangash.com
A Memorandum of Association (MOA) is a legal document that outlines the fundamental principles and objectives upon which a company operates. It serves as the company's charter or constitution and defines the scope of its activities. Here's a detailed note on the MOA:
Contents of Memorandum of Association:
Name Clause: This clause states the name of the company, which should end with words like "Limited" or "Ltd." for a public limited company and "Private Limited" or "Pvt. Ltd." for a private limited company.
https://seribangash.com/article-of-association-is-legal-doc-of-company/
Registered Office Clause: It specifies the location where the company's registered office is situated. This office is where all official communications and notices are sent.
Objective Clause: This clause delineates the main objectives for which the company is formed. It's important to define these objectives clearly, as the company cannot undertake activities beyond those mentioned in this clause.
www.seribangash.com
Liability Clause: It outlines the extent of liability of the company's members. In the case of companies limited by shares, the liability of members is limited to the amount unpaid on their shares. For companies limited by guarantee, members' liability is limited to the amount they undertake to contribute if the company is wound up.
https://seribangash.com/promotors-is-person-conceived-formation-company/
Capital Clause: This clause specifies the authorized capital of the company, i.e., the maximum amount of share capital the company is authorized to issue. It also mentions the division of this capital into shares and their respective nominal value.
Association Clause: It simply states that the subscribers wish to form a company and agree to become members of it, in accordance with the terms of the MOA.
Importance of Memorandum of Association:
Legal Requirement: The MOA is a legal requirement for the formation of a company. It must be filed with the Registrar of Companies during the incorporation process.
Constitutional Document: It serves as the company's constitutional document, defining its scope, powers, and limitations.
Protection of Members: It protects the interests of the company's members by clearly defining the objectives and limiting their liability.
External Communication: It provides clarity to external parties, such as investors, creditors, and regulatory authorities, regarding the company's objectives and powers.
https://seribangash.com/difference-public-and-private-company-law/
Binding Authority: The company and its members are bound by the provisions of the MOA. Any action taken beyond its scope may be considered ultra vires (beyond the powers) of the company and therefore void.
Amendment of MOA:
While the MOA lays down the company's fundamental principles, it is not entirely immutable. It can be amended, but only under specific circumstances and in compliance with legal procedures. Amendments typically require shareholder
Accpac to QuickBooks Conversion Navigating the Transition with Online Account...PaulBryant58
This article provides a comprehensive guide on how to
effectively manage the convert Accpac to QuickBooks , with a particular focus on utilizing online accounting services to streamline the process.
3.0 Project 2_ Developing My Brand Identity Kit.pptxtanyjahb
A personal brand exploration presentation summarizes an individual's unique qualities and goals, covering strengths, values, passions, and target audience. It helps individuals understand what makes them stand out, their desired image, and how they aim to achieve it.
Improving profitability for small businessBen Wann
In this comprehensive presentation, we will explore strategies and practical tips for enhancing profitability in small businesses. Tailored to meet the unique challenges faced by small enterprises, this session covers various aspects that directly impact the bottom line. Attendees will learn how to optimize operational efficiency, manage expenses, and increase revenue through innovative marketing and customer engagement techniques.
Cracking the Workplace Discipline Code Main.pptxWorkforce Group
Cultivating and maintaining discipline within teams is a critical differentiator for successful organisations.
Forward-thinking leaders and business managers understand the impact that discipline has on organisational success. A disciplined workforce operates with clarity, focus, and a shared understanding of expectations, ultimately driving better results, optimising productivity, and facilitating seamless collaboration.
Although discipline is not a one-size-fits-all approach, it can help create a work environment that encourages personal growth and accountability rather than solely relying on punitive measures.
In this deck, you will learn the significance of workplace discipline for organisational success. You’ll also learn
• Four (4) workplace discipline methods you should consider
• The best and most practical approach to implementing workplace discipline.
• Three (3) key tips to maintain a disciplined workplace.
Attending a job Interview for B1 and B2 Englsih learnersErika906060
It is a sample of an interview for a business english class for pre-intermediate and intermediate english students with emphasis on the speking ability.
Enterprise Excellence is Inclusive Excellence.pdfKaiNexus
Enterprise excellence and inclusive excellence are closely linked, and real-world challenges have shown that both are essential to the success of any organization. To achieve enterprise excellence, organizations must focus on improving their operations and processes while creating an inclusive environment that engages everyone. In this interactive session, the facilitator will highlight commonly established business practices and how they limit our ability to engage everyone every day. More importantly, though, participants will likely gain increased awareness of what we can do differently to maximize enterprise excellence through deliberate inclusion.
What is Enterprise Excellence?
Enterprise Excellence is a holistic approach that's aimed at achieving world-class performance across all aspects of the organization.
What might I learn?
A way to engage all in creating Inclusive Excellence. Lessons from the US military and their parallels to the story of Harry Potter. How belt systems and CI teams can destroy inclusive practices. How leadership language invites people to the party. There are three things leaders can do to engage everyone every day: maximizing psychological safety to create environments where folks learn, contribute, and challenge the status quo.
Who might benefit? Anyone and everyone leading folks from the shop floor to top floor.
Dr. William Harvey is a seasoned Operations Leader with extensive experience in chemical processing, manufacturing, and operations management. At Michelman, he currently oversees multiple sites, leading teams in strategic planning and coaching/practicing continuous improvement. William is set to start his eighth year of teaching at the University of Cincinnati where he teaches marketing, finance, and management. William holds various certifications in change management, quality, leadership, operational excellence, team building, and DiSC, among others.
What are the main advantages of using HR recruiter services.pdfHumanResourceDimensi1
HR recruiter services offer top talents to companies according to their specific needs. They handle all recruitment tasks from job posting to onboarding and help companies concentrate on their business growth. With their expertise and years of experience, they streamline the hiring process and save time and resources for the company.
1. CHAPTER 16
COST ALLOCATION: JOINT PRODUCTS AND BYPRODUCTS
161 Exhibit 161 presents many examples of joint products from four different general
industries. These include:
Industry Separable Products at the Splitoff Point
Food Processing:
• Lamb • Lamb cuts, tripe, hides, bones, fat
• Turkey • Breasts, wings, thighs, poultry meal
Extractive:
• Petroleum • Crude oil, natural gas
162 A joint cost is a cost of a production process that yields multiple products simultaneously.
A separable cost is a cost incurred beyond the splitoff point that is assignable to each of the
specific products identified at the splitoff point.
163 The distinction between a joint product and a byproduct is based on relative sales value.
A joint product is a product from a joint production process (a process that yields two or more
products) that has a relatively high total sales value. A byproduct is a product that has a relatively
low total sales value compared to the total sales value of the joint (or main) products.
164 A product is any output that has a positive sales value (or an output that enables a
company to avoid incurring costs). In some jointcost settings, outputs can occur that do not have
a positive sales value. The offshore processing of hydrocarbons yields water that is recycled back
into the ocean as well as yielding oil and gas. The processing of mineral ore to yield gold and
silver also yields dirt as an output, which is recycled back into the ground.
165 The chapter lists the following six reasons for allocating joint costs:
1. Computation of inventoriable costs and cost of goods sold for financial accounting
purposes and reports for income tax authorities.
2. Computation of inventoriable costs and cost of goods sold for internal reporting purposes.
3. Cost reimbursement under contracts when only a portion of a business's products or
services is sold or delivered under costplus contracts.
4. Insurance settlement computations for damage claims made on the basis of cost
information of joint products or byproducts.
5. Rate regulation when one or more of the jointlyproduced products or services are subject
to price regulation.
6. Litigation in which costs of joint products are key inputs.
166 The joint production process yields individual products that are either sold this period or
held as inventory to be sold in subsequent periods. Hence, the joint costs need to be allocated
between total production rather than just those sold this period.
167 This situation can occur when a production process yields separable outputs at the splitoff
point that do not have selling prices available until further processing. The result is that selling
prices are not available at the splitoff point to use the sales value at splitoff method. Examples
include processing in integrated pulp and paper companies and in petrochemical operations.
161
2. 168 Both methods use market sellingprice data in allocating joint costs, but they differ in
which salesprice data they use. The sales value at splitoff method allocates joint costs to joint
products on the basis of the relative total sales value at the splitoff point of the total production of
these products during the accounting period. The net realizable value method allocates joint costs
to joint products on the basis of the relative net realizable value (the final sales value minus the
separable costs of production and marketing) of the total production of the joint products during
the accounting period.
169 Limitations of the physical measure method of jointcost allocation include:
a. The physical weights used for allocating joint costs may have no relationship to the
revenueproducing power of the individual products.
b. The joint products may not have a common physical denominator––for example, one
may be a liquid while another a solid with no readily available conversion factor.
1610 The NRV method can be simplified by assuming (a) a standard set of postsplitoff point
processing steps, and (b) a standard set of selling prices. The use of (a) and (b) achieves the same
benefits that the use of standard costs does in costing systems.
1611 The constant grossmargin percentage NRV method takes account of the postsplitoff
point “profit” contribution earned on individual products, as well as joint costs, when making
cost assignments to joint products. In contrast, the sales value at splitoff point and the NRV
methods allocate only the joint costs to the individual products.
1612 No. Any method used to allocate joint costs to individual products that is applicable to
the problem of joint productcost allocation should not be used for management decisions
regarding whether a product should be sold or processed further. When a product is an inherent
result of a joint process, the decision to process further should not be influenced by either the
size of the total joint costs or by the portion of the joint costs assigned to particular products.
Joint costs are irrelevant for these decisions. The only relevant items for these decisions are the
incremental revenue and the incremental costs beyond the splitoff point.
1613 No. The only relevant items are incremental revenues and incremental costs when
making decisions about selling products at the splitoff point or processing them further.
Separable costs are not always identical to incremental costs. Separable costs are costs incurred
beyond the splitoff point that are assignable to individual products. Some separable costs may
not be incremental costs in a specific setting (e.g., allocated manufacturing overhead for post
splitoff processing that includes depreciation).
1614 Two methods to account for byproducts are:
a. Production method—recognizes byproducts in the financial statements at the time
production is completed.
b. Sales method—delays recognition of byproducts until the time of sale.
1615 The sales byproduct method enables a manager to time the sale of byproducts to affect
reported operating income. A manager who was below the targeted operating income could
adopt a “firesale” approach to selling byproducts so that the reported operating income exceeds
the target. This illustrates one dysfunctional aspect of the sales method for byproducts.
162
3. 1616 (2030 min.) Jointcost allocation, insurance settlement.
1. (a) Sales value at splitoff method:
Pounds Wholesale Sales Weighting: Joint Allocated
of Selling Price Value Sales Value Costs Costs per
Product per Pound at Splitoff at Splitoff Allocated Pound
Breasts 100 $0.55 $55.00 0.675 $33.75 0.3375
Wings 20 0.20 4.00 0.049 2.45 0.1225
Thighs 40 0.35 14.00 0.172 8.60 0.2150
Bones 80 0.10 8.00 0.098 4.90 0.0613
Feathers 10 0.05 0.50 0.006 0.30 0.0300
250 $81.50 1.000 $50.00
Costs of Destroyed Product
Breasts: $0.3375 per pound ´ 40 pounds = $13.50
Wings: $0.1225 per pound ´ 15 pounds = 1.84
$15.34
b. Physical measure method:
Pounds Weighting: Joint Allocated
of Physical Costs Costs per
Product Measures Allocated Pound
Breasts 100 0.400 $20.00 $0.200
Wings 20 0.080 4.00 0.200
Thighs 40 0.160 8.00 0.200
Bones 80 0.320 16.00 0.200
Feathers 10 0.040 2.00 0.200
250 1.000 $50.00
Costs of Destroyed Product
Breast: $0.20 per pound ´ 40 pounds = $ 8
Wings: $0.20 per pound ´ 15 pounds = 3
$11
Note: Although not required, it is useful to highlight the individual product profitability figures:
Sales Value at Physical
Splitoff Method Measures Method
Sales Joint Costs Gross Joint Costs Gross
Product Value Allocated Income Allocated Income
Breasts $55.00 $33.75 $21.25 $20.00 $35.00
Wings 4.00 2.45 1.55 4.00 0.00
Thighs 14.00 8.60 5.40 8.00 6.00
Bones 8.00 4.90 3.10 16.00 (8.00)
Feathers 0.50 0.30 0.20 2.00 (1.50)
163
4. 2. The salesvalue at splitoff method captures the benefitsreceived criterion of cost
allocation and is the preferred method. The costs of processing a chicken are allocated to
products in proportion to the ability to contribute revenue. Quality Chicken’s decision to process
chicken is heavily influenced by the revenues from breasts and thighs. The bones provide
relatively few benefits to Quality Chicken despite their high physical volume.
The physical measures method shows profits on breasts and thighs and losses on bones
and feathers. Given that Quality Chicken has to jointly process all the chicken products, it is non
intuitive to single out individual products that are being processed simultaneously as making
losses while the overall operations make a profit. Quality Chicken is processing chicken mainly
for breasts and thighs and not for wings, bones, and feathers, while the physical measure method
allocates a disproportionate amount of costs to wings, bones and feathers.
1617 (10 min.) Joint products and byproducts (continuation of 1616).
1. Ending inventory:
Breasts 15 ´ $0.3375 = $5.0625
Wings 4 ´ 0.1225 = 0.4900
Thighs 6 ´ 0.2150 = 1.2900
Bones 5 ´ 0.0613 = 0.3065
Feathers 2 ´ 0.0300 = 0.0600
$7.2090
2.
Joint products Byproducts Net Realizable Values of
byproducts:
Breasts Wings Wings $ 4.00
Thighs Bones Bones 8.00
Feathers Feathers 0.50
$12.50
Joint costs to be allocated:
Joint costs – Net Realizable Values of byproducts = $50 – $12.50 = $37.50
Pounds Wholesale Sales Weighting: Joint Allocated
of Selling Price Value Sales Value Costs Costs Per
Product per Pound at Splitoff at Splitoff Allocated Pound
Breast 100 $0.55 $55 55 ÷ 69 $29.89 $0.2989
Thighs 40 0.35 14 14 ÷ 69 7.61 0.1903
$69 $37.50
Ending inventory:
Breasts 15 ´ $0.2989 $4.4835
Thighs 6 ´ 0.1903 1.1418
$5.6253
3. Treating all products as joint products does not require judgments as to whether a product
is a joint product or a byproduct. Joint costs are allocated in a consistent manner to all products
for the purpose of costing and inventory valuation. In contrast, the approach in requirement 2
lowers the joint cost by the amount of byproduct net realizable values and results in inventory
values being shown for only two of the five products, the ones (perhaps arbitrarily) designated as
being joint products.
164
5. 1618 (10 min.) Net realizable value method.
A diagram of the situation is in Solution Exhibit 1618.
Corn Syrup Corn Starch Total
Final sales value of total production,
12,500 ´ $50; 6,250 ´ $25 $625,000 $156,250 $781,250
Deduct separable costs 375,000 93,750 468,750
Net realizable value at splitoff point $250,000 $ 62,500 $312,500
Weighting, $250,000; $62,500 ¸ $312,500 0.8 0.2
Joint costs allocated, 0.8; 0.2 ´ $325,000 $260,000 $ 65,000 $325,000
SOLUTION EXHIBIT 1618 (all numbers are in thousands)
Joint Costs Separable Costs
Processing Corn Syrup:
12,500 cases at
$375,000 $50 per case
Processing
$325,000
Processing Corn Starch:
6,250 cases at
$93,750 $25 per case
Splitoff
Point
165
6. 1619 (40 min.) Alternative jointcostallocation methods, furtherprocess decision.
A diagram of the situation is in Solution Exhibit 1619.
1. Methanol Turpentine Total
Physical measure of total production (gallons) 2,500 7,500 10,000
Weighting, 2,500; 7,500 ¸ 10,000 0.25 0.75
Joint costs allocated, 0.25; 0.75 ´ $120,000 $ 30,000 $ 90,000 $120,000
2. Methanol Turpentine Total
Final sales value of total production,
2,500 ´ $21.00; 7,500 ´ $14.00 $ 52,500 $105,000 $157,500
Deduct separable costs,
2,500 ´ $3.00; 7,500 ´ $2.00 7,500 15,000 22,500
Net realizable value at splitoff point $ 45,000 $ 90,000 $135,000
Weighting, $45,000; $90,000 ¸ $135,000 1/3 2/3
Joint costs allocated, 1/3; 2/3 ´ $120,000 $ 40,000 $ 80,000 $120,000
3. a. Physicalmeasure (gallons) method:
Methanol Turpentine Total
Revenues $52,500 $105,000 $157,500
Cost of goods sold:
Joint costs 30,000 90,000 120,000
Separable costs 7,500 15,000 22,500
Total cost of goods sold 37,500 105,000 142,500
Gross margin $15,000 $ 0 $ 15,000
b. Estimated net realizable value method:
Methanol Turpentine Total
Revenues $52,500 $105,000 $157,500
Cost of goods sold:
Joint costs 40,000 80,000 120,000
Separable costs 7,500 15,000 22,500
Total cost of goods sold 47,500 95,000 142,500
Gross margin $ 5,000 $ 10,000 $ 15,000
166
7. 4.
Alcohol Bev. Turpentine Total
Final sales value of total production,
2,500 ´ $60.00; 7,500 ´ $14.00 $150,000 $105,000 $255,000
Deduct separable costs,
(2,500 ´ $12.00) + (0.20 ´ $150,000);
7,500 ´ $2.00 60,000 15,000 75,000
Net realizable value at splitoff point $ 90,000 $ 90,000 $180,000
Weighting, $90,000; $90,000 ¸ $180,000 0.50 0.50
Joint costs allocated, 0.5; 0.5 ´ $120,000 $ 60,000 $ 60,000 $120,000
An incremental approach demonstrates that the company should use the new process:
Incremental revenue,
($60.00 – $21.00) ´ 2,500 $ 97,500
Incremental costs:
Added processing, $9.00 ´ 2,500 $22,500
Taxes, (0.20 ´ $60.00) ´ 2,500 30,000 (52,500)
Incremental operating income from
further processing $ 45,000
Proof: Total sales of both products $255,000
Joint costs 120,000
Separable costs 75,000
Cost of goods sold 195,000
New gross margin 60,000
Old gross margin 15,000
Difference in gross margin $ 45,000
SOLUTION EXHIBIT 1619
Joint Costs Separable Costs
Methanol:
2,500 Processing 2,500 gallons
gallons $3 per gallon at $21 per gallon
Processing
$120,000
for 10,000
gallons
Turpentine:
7,500 Processing 7,500 gallons
gallons $2 per gallon at $14 per gallon
Splitoff
Point
167
8. 1620 (40 min.) Alternative methods of jointcost allocation, ending inventories.
Total production for the year was:
Ending Total
Sold Inventories Production
X 120 180 300
Y 340 60 400
Z 475 25 500
A diagram of the situation is in Solution Exhibit 1620.
1. a. Net realizable value (NRV) method:
X Y Z Total
Final sales value of total production,
300 ´ $1,500; 400 ´ $1,000; 500 ´ $700 $450,000 $400,000 $350,000 $1,200,000
Deduct separable costs –– –– 200,000 200,000
Net realizable value at splitoff point $450,000 $400,000 $150,000 $1,000,000
Weighting, $450; $400; $150 ¸ $1,000 0.45 0.40 0.15
Joint costs allocated,
0.45, 0.40, 0.15 ´ $400,000 $180,000 $160,000 $ 60,000 $ 400,000
Ending Inventory Percentages:
X Y Z
Ending inventory 180 60 25
Total production 300 400 500
Ending inventory percentage 60% 15% 5%
Income Statement
X Y Z Total
Revenues,
120 ´ $1,500; 340 ´ $1,000; 475 ´ $700 $180,000 $340,000 $332,500 $852,500
Cost of goods sold:
Joint costs allocated 180,000 160,000 60,000 400,000
Separable costs –– –– 200,000 200,000
Production costs 180,000 160,000 260,000 600,000
Deduct ending inventory,
60%; 15%; 5% of production costs 108,000 24,000 13,000 145,000
Cost of goods sold 72,000 136,000 247,000 455,000
Gross margin $108,000 $204,000 $ 85,500 $397,500
Grossmargin percentage 60% 60% 25.71%
168
9. b. Constant grossmargin percentage NRV method:
Step 1:
Final sales value of prodn., (300 ´ $1,500) + (400 ´ $1,000) + (500 ´ $700) $1,200,000
Deduct joint and separable costs, $400,000 + $200,000 600,000
Gross margin $ 600,000
Grossmargin percentage, $600,000 ÷ $1,200,000 50%
Step 2:
X Y Z Total
Final sales value of total production,
300 ´ $1,500; 400 ´ $1,000; 500 ´ $700 $450,000 $400,000 $350,000 $1,200,000
Deduct gross margin, using overall
grossmargin percentage of sales, 50% 225,000 200,000 175,000 600,000
Total production costs 225,000 200,000 175,000 600,000
Step 3: Deduct separable costs — — 200,000 200,000
Joint costs allocated $225,000 $200,000 $(25,000) $ 400,000
The negative jointcost allocation to Product Z illustrates one “unusual” feature of the
constant grossmargin percentage NRV method: some products may receive negative cost
allocations so that all individual products have the same grossmargin percentage.
Income Statement
X Y Z Total
Revenues, 120 ´ $1,500;
340 ´ $1,000; 475 ´ $700 $180,000 $340,000 $332,500 $852,500
Cost of goods sold:
Joint costs allocated 225,000 200,000 (25,000) 400,000
Separable costs 200,000 200,000
Production costs 225,000 200,000 175,000 600,000
Deduct ending inventory,
60%; 15%; 5% of production costs 135,000 30,000 8,750 173,750
Cost of goods sold 90,000 170,000 166,250 426,250
Gross margin $ 90,000 $170,000 $166,250 $426,250
Grossmargin percentage 50% 50% 50% 50%
169
10. Summary
X Y Z Total
a. NRV method:
Inventories on balance sheet $108,000 $ 24,000 $ 13,000 $145,000
Cost of goods sold on income statement 72,000 136,000 247,000 455,000
$600,000
b. Constant grossmargin
percentage NRV method
Inventories on balance sheet $135,000 $ 30,000 $ 8,750 $173,750
Cost of goods sold on income statement 90,000 170,000 166,250 426,250
$600,000
2. Grossmargin percentages:
X Y Z
NRV method 60% 60% 25.71%
Constant grossmargin percentage NRV 50% 50% 50.00%
SOLUTION EXHIBIT 1620
Joint Costs Separable Costs
Product X:
300 tons at
$1,500 per ton
Joint
Product Y:
Processing
400 tons at
Costs
$1,000 per ton
$400,000
Product Z:
Processing
500 tons at
$200,000 $700 per ton
Splitoff
Point
1610
12. 2. The operatingincome amounts for each product using each method is:
(a) Physical Measure Method
Crude Oil NGL Gas Total
Revenues $2,700 $750 $1,040 $4,490
Cost of goods sold
Joint costs 270 90 1,440 1,800
Separable costs 175 105 210 490
Total cost of goods sold 445 195 1,650 2,290
Gross margin $2,255 $555 $ (610) $2,200
(b) NRV Method
Crude Oil NGL Gas Total
Revenues $2,700.00 $750.00 $1,040.00 $4,490.00
Cost of goods sold
Joint costs 1,136.25 290.25 373.50 1,800.00
Separable costs 175.00 105.00 210.00 490.00
Total cost of goods sold 1,311.25 395.25 583.50 2,290.00
Gross margin $1,388.75 $354.75 $ 456.50 $2,200.00
3. Neither method should be used for product emphasis decisions. It is inappropriate to use
jointcostallocated data to make decisions regarding dropping individual products, or pushing
individual products, as they are joint by definition. Productemphasis decisions should be made
based on relevant revenues and relevant costs. Each method can lead to product emphasis
decisions that do not lead to maximization of operating income.
4. Since crude oil is the only product subject to taxation, it is clearly in Sinclair’s best
interest to use the NRV method since it leads to a lower profit for crude oil and, consequently, a
smaller tax burden. A letter to the taxation authorities could stress the conceptual superiority of
the NRV method. Chapter 16 argues that, using a benefitsreceived cost allocation criterion,
marketbased joint cost allocation methods are preferable to physicalmeasure methods. A
meaningful common denominator (revenues) is available when the sales value at splitoff point
method or NRV method is used. The physicalmeasures method requires nonhomogeneous
products (liquids and gases) to be converted to a common denominator.
1612
13. 1622 (30 min.) Jointcost allocation, sales value, physical measure, NRV methods.
1a.
Special B/ Special S/
PANEL A: Allocation of Joint Costs using Sales Value at Beef Shrimp
Splitoff Method Ramen Ramen Total
Sales value of total production at splitoff point
(10,000 tons ´ $10 per ton; 20,000 ´ $15 per ton) $100,000 $300,000 $400,000
Weighting ($100,000; $300,000 ÷ $400,000) 0.25 0.75
Joint costs allocated (0.25; 0.75 ´ $240,000) $60,000 $180,000 $240,000
PANEL B: ProductLine Income Statement for June 2009 Special B Special S Total
Revenues
(12,000 tons ´ $18 per ton; 24,000 ´ $25 per ton) $216,000 $600,000 $816,000
Deduct joint costs allocated (from Panel A) 60,000 180,000 240,000
Deduct separable costs 48,000 168,000 216,000
Gross margin $108,000 $252,000 $360,000
Gross margin percentage 50% 42% 44%
1b.
Special B/ Special S/
PANEL A: Allocation of Joint Costs using PhysicalMeasure Beef Shrimp
Method Ramen Ramen Total
Physical measure of total production (tons) 10,000 20,000 30,000
Weighting (10,000 tons; 20,000 tons ÷ 30,000 tons) 33% 67%
Joint costs allocated (0.33; 0.67 ´ $240,000) $80,000 $160,000 $240,000
PANEL B: ProductLine Income Statement for June 2009 Special B Special S Total
Revenues
(12,000 tons ´ $18 per ton; 24,000 ´ $25 per ton) $216,000 $600,000 $816,000
Deduct joint costs allocated (from Panel A) 80,000 160,000 240,000
Deduct separable costs 48,000 168,000 216,000
Gross margin $ 88,000 $272,000 $360,000
Gross margin percentage 41% 45% 44%
1c.
PANEL A: Allocation of Joint Costs using Net Realizable
Value Method Special B Special S Total
Final sales value of total production during accounting period
(12,000 tons ´ $18 per ton; 24,000 tons ´ $25 per ton) $216,000 $600,000 $816,000
Deduct separable costs 48,000 168,000 216,000
Net realizable value at splitoff point $168,000 $432,000 $600,000
Weighting ($168,000; $432,000 ÷ $600,000) 28% 72%
Joint costs allocated (0.28; 0.72 ´ $240,000) $67,200 $172,800 $240,000
PANEL B: ProductLine Income Statement for June 2009 Special B Special S Total
Revenues (12,000 tons ´ $18 per ton; 24,000 tons ´ $25 per ton) $216,000 $600,000 $816,000
Deduct joint costs allocated (from Panel A) 67,200 172,800 240,000
Deduct separable costs 48,000 168,000 216,000
Gross margin $100,800 $259,200 $360,000
Gross margin percentage 46.7% 43.2% 44.1%
1613
14. 2. Sherrie Dong probably performed the analysis shown below to arrive at the net loss of
$2,228 from marketing the stock:
Special B/ Special S/
PANEL A: Allocation of Joint Costs using Beef Shrimp
Sales Value at Splitoff Ramen Ramen Stock Total
Sales value of total production at splitoff point
(10,000 tons ´ $10 per ton; 20,000 ´ $15 per
ton; 4,000 ´ $5 per ton) $100,000 $300,000 $20,000 $420,000
Weighting
($100,000; $300,000; $20,000 ÷ $420,000) 23.8095% 71.4286% 4.7619% 100%
Joint costs allocated
(0.238095; 0.714286; 0.047619 ´ $240,000) $57,143 $171,429 $11,428 $240,000
PANEL B: ProductLine Income Statement
for June 2009 Special B Special S Stock Total
Revenues
(12,000 tons ´ $18 per ton; 24,000 ´ $25 per ton;
4,000 ´ $5 per ton) $216,000 $600,000 $20,000 $836,000
Separable processing costs 48,000 168,000 0 216,000
Joint costs allocated (from Panel A) 57,143 171,429 11,428 240,000
Gross margin $110,857 $260,571 8,572 380,000
Deduct marketing costs 10,800 10,800
Operating income $ (2,228) $369,200
In this (misleading) analysis, the $240,000 of joint costs are reallocated between Special B,
Special S, and the stock. Irrespective of the method of allocation, this analysis is wrong. Joint
costs are always irrelevant in a processfurther decision. Only incremental costs and revenues
past the splitoff point are relevant. In this case, the correct analysis is much simpler: the
incremental revenues from selling the stock are $20,000, and the incremental costs are the
marketing costs of $10,800. So, Instant Foods should sell the stock—this will increase its
operating income by $9,200 ($20,000 – $10,800).
1614
15. 1623 (20 min.) Joint cost allocation: sell immediately or process further.
1.
a. Sales value at splitoff method:
Cookies/ Soyola/ Total
Soymeal Soy Oil
Sales value of total production at splitoff,
500lbs × $1; 100 gallons × $4 $500 $400 $900
Weighting, $500; $400 ¸ $900 0.556 0.444
Joint costs allocated,
0.556; 0.444 ´ $500 $278 $222 $500
b. Net realizable value method:
Cookies Soyola Total
Final sales value of total production,
600lbs × $2; 400qts × $1.25 $1,200 $500 $1,700
Deduct separable costs 300 200 500
Net realizable value $ 900 $300 $1,200
Weighting, $900; $300 ¸ $1,200 0.75 0.25
Joint costs allocated,
0.75; 0.25 ´ $500 $ 375 $125 $ 500
2.
Cookies/Soy Meal Soyola/Soy Oil
a
Revenue if sold at splitoff $500 $ 400 b
Process further NRV 900 c 300 d
Profit (Loss) from processing further $400 $(100)
a
500 lbs × $1 = $500
b
100 gal × $4 = $400
c
600 lbs × $2 – $300 = $900
d
400 qts × $1.25 – $200 = $300
ISP should process the soy meal into cookies because it increases profit by $400 (900500).
However, they should sell the soy oil as is, without processing it into the form of Soyola, because
profit will be $100 (400300) higher if they do. Since the total joint cost is the same under both
allocation methods, it is not a relevant cost to the decision to sell at splitoff or process further.
1615
16. 1624 (30 min.) Accounting for a main product and a byproduct.
Production Sales
Method Method
1. Revenues
a
Main product $640,000 $640,000
d
Byproduct ––__ 28,000
Total revenues 640,000 668,000
Cost of goods sold
Total manufacturing costs 480,000 480,000
b
Deduct value of byproduct production 40,000 0
Net manufacturing costs 440,000 480,000
c e
Deduct main product inventory 88,000 96,000
Cost of goods sold 352,000 384,000
Gross margin $288,000 $284,000
a
32,000 ´ $20.00 d
b 5,600 ´ $5.00
8,000 ´ $5.00 e
c (8,000/40,000) × $480,000 = $96,000
(8,000/40,000) × $440,000 = $88,000
Production Sales
Method Method
2. Main Product $88,000 $96,000
a
Byproduct 12,000 0
a
Ending inventory shown at unrealized selling price.
BI + Production – Sales = EI
0 + 8,000 – 5,600 = 2,400 pounds
Ending inventory = 2,400 pounds ´ $5 per pound = $12,000
1616
17. 1625 (3545 min.) Joint costs and byproducts.
1. Computing byproduct deduction to joint costs:
Revenues from C, 20,000 ´ $3 $ 60,000
Deduct:
Gross margin, 10% of revenues 6,000
Marketing costs, 25% of revenues 15,000
Peanut Butter Department separable costs 10,000
Net realizable value (less gross margin) of C $ 29,000
Joint costs $160,000
Deduct byproduct contribution 29,000
Net joint costs to be allocated $131,000
Deduct Net
Unit Final Separable Realizable Allocation of
Sales Sales Processing Value at $131,000
Quantity Price Value Cost Splitoff Weighting Joint Costs
A 10,000 $10 $100,000 $20,000 $ 80,000 40% $ 52,400
B 60,000 2 120,000 –– 120,000 60% 78,600
Totals $220,000 $20,000 $200,000 $131,000
Add Separable
Joint Costs Processing
Allocation Costs Total Costs Units Unit Cost
A $ 52,400 $20,000 $ 72,400 10,000 $7.24
B 78,600 –– 78,600 60,000 1.31
Totals $131,000 $20,000 $151,000 70,000
Unit cost for C: $1.45 ($29,000 ÷ 20,000) + $0.50 ($10,000 ÷ 20,000) = $1.95,
or $3.00 – $0.30 (10% ´ $3) – $0.75 (25% ´ $3) = $1.95.
1617
18. 2. If all three products are treated as joint products:
Deduct Net
Unit Final Separable Realizable Allocation
Sales Sales Processing Value at of $160,000
Quantity Price Value Cost Splitoff Weighting Joint Costs
A 10,000 $10 $100,000 $20,000 $ 80,000 80 ÷ 235 $ 54,468
B 60,000 2 120,000 ─ 120,000 120 ÷ 235 81,702
C 20,000 3 60,000 25,000 35,000 35 ÷ 235 23,830
Totals $280,000 $45,000 $235,000 $160,000
Add Separable
Joint Costs Processing
Allocation Costs Total Costs Units Unit Cost
A $ 54,468 $20,000 $ 74,468 10,000 $7.45
B 81,702 –– 81,702 60,000 1.36
C 23,830 10,000 33,830 20,000 1.69
Totals $160,000 $30,000 $190,000 90,000
Call the attention of students to the different unit “costs” resulting from the two assumptions
about the relative importance of Product C. The point is that costs of individual products depend
heavily on which assumptions are made and which accounting methods and techniques are used.
1626 (25 min.) Accounting for a byproduct.
1. Byproduct recognized at time of production:
Joint cost = $1,500
Joint cost to be charged to main product = Joint Cost NRV of Byproduct = $1,500 (50 lbs. × $1.20)
= $1,440
$1440
Inventoriable cost of main product = = $3.60 per container
400 containers
Inventoriable cost of byproduct = NRV = $1.20 per pound
Gross Margin Calculation under Production Method
Revenues
Main product: Water (600/2 containers × $8) $2,400
Byproduct: Sea Salt 0
2,400
Cost of goods sold
Main product: Water (300 containers × $3.60) 1,080
Gross margin $1,320
Grossmargin percentage ($1,320 ÷ $2,400) 55.00%
Inventoriable costs (end of period):
Main product: Water (100 containers × $3.60) = $360
Byproduct: Sea Salt (10 pounds × $1.20) = $12
1618
19. 2. Byproduct recognized at time of sale:
Joint cost to be charged to main product = Total joint cost = $1,500
$1500
Inventoriable cost of main product = = $3.75 per container
400 containers
Inventoriable cost of byproduct = $0
Gross Margin Calculation under Sales Method
Revenues
Main product: Water (600/2 containers × $8) $2,400
Byproduct: Sea Salt (40 pounds × $1.20) 48
2,448
Cost of goods sold
Main product: Water (300 containers × $3.75) 1,125
Gross margin $1,323
Grossmargin percentage ($1,323 ÷ $2,448) 54.04%
Inventoriable costs (end of period):
Main product: Water (100 containers × $3.75) = $375
Byproduct: Sea Salt (10 pounds × $0) = $0
3. The production method recognizes the byproduct cost as inventory in the period it is
produced. This method sets the cost of the byproduct inventory equal to its net realizable
value. When the byproduct is sold, inventory is reduced without being expensed through the
income statement. The sales method associates all of the production cost with the main
product. Under this method, the byproduct has no inventoriable cost and is recognized only
when it is sold.
1619
20. 1627 (40 min.) Alternative methods of jointcost allocation, productmix decisions.
A diagram of the situation is in Solution Exhibit 1627.
1. Computation of jointcost allocation proportions:
a. Sales Value of
Total Production Allocation of $100,000
at Splitoff Weighting Joint Costs
A $ 50,000 50 ÷ 200 = 0.25 $ 25,000
B 30,000 30 ÷ 200 = 0.15 15,000
C 50,000 50 ÷ 200 = 0.25 25,000
D 70,000 70 ÷ 200 = 0.35 35,000
$200,000 1.00 $100,000
b.
Physical Measure Allocation of $100,000
of Total Production Weighting Joint Costs
A 300,000 gallons 300 ÷ 500 = 0.60 $ 60,000
B 100,000 gallons 100 ÷ 500 = 0.20 20,000
C 50,000 gallons 50 ÷ 500 = 0.10 10,000
D 50,000 gallons 50 ÷ 500 = 0.10 10,000
500,000 gallons 1.00 $100,000
c.
Final Sales Net Allocation
Value of Realizable of
Total Separable Value at $100,000
Production Costs Splitoff Weighting Joint Costs
Super A $300,000 $200,000 $100,000 100 ÷ 200 = 0.50 $ 50,000
Super B 100,000 80,000 20,000 20 ÷ 200 = 0.10 10,000
C 50,000 – 50,000 50 ÷ 200 = 0.25 25,000
Super D 120,000 90,000 30,000 30 ÷ 200 = 0.15 15,000
$200,000 1.00 $100,000
1620
21. Computation of grossmargin percentages:
a. Sales value at splitoff method:
Super A Super B C Super D Total
Revenues $300,000 $100,000 $50,000 $120,000 $570,000
Joint costs 25,000 15,000 25,000 35,000 100,000
Separable costs 200,000 80,000 0 90,000 370,000
Total cost of goods sold 225,000 95,000 25,000 125,000 470,000
Gross margin $ 75,000 $ 5,000 $25,000 $ (5,000) $100,000
Grossmargin percentage 25% 5% 50% (4.17%) 17.54%
b. Physicalmeasure method:
Super A Super B C Super D Total
Revenues $300,000 $100,000 $50,000 $120,000 $570,000
Joint costs 60,000 20,000 10,000 10,000 100,000
Separable costs 200,000 80,000 0 90,000 370,000
Total cost of goods sold 260,000 100,000 10,000 100,000 470,000
Gross margin $ 40,000 $ 0 $40,000 $ 20,000 $100,000
Grossmargin percentage 13.33% 0% 80% 16.67% 17.54%
c. Net realizable value method:
Super A Super B C Super D Total
Revenues $300,000 $100,000 $50,000 $120,000 $570,000
Joint costs 50,000 10,000 25,000 15,000 100,000
Separable costs 200,000 80,000 0 90,000 370,000
Total cost of goods sold 250,000 90,000 25,000 105,000 470,000
Gross margin $ 50,000 $ 10,000 $25,000 $ 15,000 $100,000
Grossmargin percentage 16.67% 10% 50% 12.5% 17.54%
Summary of grossmargin percentages:
JointCost
Allocation Method Super A Super B C Super D
Sales value at splitoff 25.00% 5% 50% (4.17)%
Physical measure 13.33% 0% 80% 16.67%
Net realizable value 16.67% 10% 50% 12.50%
1621
22. 2. Further Processing of A into Super A:
Incremental revenue, $300,000 – $50,000 $250,000
Incremental costs 200,000
Incremental operating income from further processing $ 50,000
Further processing of B into Super B:
Incremental revenue, $100,000 – $30,000 $ 70,000
Incremental costs 80,000
Incremental operating loss from further processing $ (10,000)
Further Processing of D into Super D:
Incremental revenue, $120,000 – $70,000 $ 50,000
Incremental costs 90,000
Incremental operating loss from further processing $ (40,000)
Operating income can be increased by $50,000 if both B and D are sold at their splitoff point
rather than processed further into Super B and Super D.
SOLUTION EXHIBIT 1627
Revenues at Splitoff
Joint Costs
and Separable Costs
A, 300,000 gallons
Processing Super A
Revenue = $50,000
$200,000 $300,000
B, 100,000 gallons Processing Super B
Revenue = $30,000 $80,000 $100,000
Processing
$100,000
C, 50,000 gallons
Revenue = $50,000
D, 50,000 gallons Processing Super D
Revenue = $70,000 $90,000 $120,000
Splitoff
Point
1622
23. 1628 (40–60 min.) Comparison of alternative jointcost allocation methods, further
processing decision, chocolate products.
Joint Costs Separable Costs
$30,000
Chocolate Processing Chocolate
Powder Liquor $12,750 Powder
Base
Cocoa
Beans
Processing
Milk
Processing
MilkChocolate Chocolate
$26,250
Liquor Base
SPLITOFF
POINT
1a. Sales value at splitoff method:
Chocolate Milk
Powder/ Chocolate/ Total
Liquor Base Liquor Base
Sales value of total production at splitoff,
600 ´ $21; 900 ´ $26 $12,600 $23,400 $36,000
Weighting, $12,600; $23,400 ¸ $36,000 0.35 0.65
Joint costs allocated,
0.35; 0.65 ´ $30,000 $10,500 $19,500 $30,000
1b.
Physicalmeasure method:
Physical measure of total production
(15,000 ¸ 1,500) ´ 60; 90 600 gallons 900 gallons 1,500 gallons
Weighting, 600; 900 ¸ 1,500 0.40 0.60
Joint costs allocated,
0.40; 0.60 ´ $30,000 $12,000 $18,000 $30,000
1623
24. 1c. Net realizable value method:
Chocolate Milk
Powder Chocolate Total
Final sales value of total production,
6,000 ´ $4; 10,200 ´ $5 $24,000 $51,000 $75,000
Deduct separable costs 12,750 26,250 39,000
Net realizable value at splitoff point $11,250 $24,750 $36,000
Weighting, $11,250; $24,750 ¸ $36,000 0.3125 0.6875
Joint costs allocated,
0.3125; 0.6875 ´ $30,000 $ 9,375 $20,625 $30,000
d. Constant grossmargin percentage NRV method:
Step 1:
Final sales value of total production, (6,000 ´ $4) + (10,200 ´ $5) $75,000
Deduct joint and separable costs, ($30,000 + $12,750 + $26,250) 69,000
Gross margin $ 6,000
Grossmargin percentage ($6,000 ÷ $75,000) 8%
Step 2:
Chocolate Milk
Powder Chocolate Total
Final sales value of total production,
6,000 ´ $4; 10,200 ´ $5 $24,000 $51,000 $75,000
Deduct gross margin, using overall
grossmargin percentage of sales (8%) 1,920 4,080 6,000
Total production costs 22,080 46,920 69,000
Step 3:
Deduct separable costs 12,750 26,250 39,000
Joint costs allocated $ 9,330 $20,670 $30,000
1624
25. 2. Chocolate Milk
Powder Chocolate Total
a. Revenues $24,000 $51,000 $75,000
Joint costs 10,500 19,500 30,000
Separable costs 12,750 26,250 39,000
Total cost of goods sold 23,250 45,750 69,000
Gross margin $ 750 $ 5,250 $ 6,000
Grossmargin percentage 3.125% 10.294% 8%
b. Revenues $24,000 $51,000 $75,000
Joint costs 12,000 18,000 30,000
Separable costs 12,750 26,250 39,000
Total cost of goods sold 24,750 44,250 69,000
Gross margin $ (750) $ 6,750 $ 6,000
Grossmargin percentage (3.125)% 13.235% 8%
c. Revenues $24,000 $51,000 $75,000
Joint costs 9,375 20,625 30,000
Separable costs 12,750 26,250 39,000
Total cost of goods sold 22,125 46,875 69,000
Gross margin $ 1,875 $ 4,125 $ 6,000
Grossmargin percentage 7.812% 8.088% 8%
d. Revenues $24,000 $51,000 $75,000
Joint costs 9,330 20,670 30,000
Separable costs 12,750 26,250 39,000
Total cost of goods sold 22,080 46,920 69,000
Gross margin $ 1,920 $ 4,080 $ 6,000
Grossmargin percentage 8% 8% 8%
3. Further processing of chocolatepowder liquor base into chocolate powder:
Incremental revenue, $24,000 – $12,600 $11,400
Incremental costs 12,750
Incremental operating income from further processing $ (1,350)
Further processing of milkchocolate liquor base into milk chocolate:
Incremental revenue, $51,000 – $23,400 $27,600
Incremental costs 26,250
Incremental operating income from further processing $ 1,350
Chocolate Factory could increase operating income by $1,350 (to $7,350) if chocolatepowder
liquor base is sold at the splitoff point and if milkchocolate liquor base is further processed into
milk chocolate.
1625
26. 1629 (30 min.) Jointcost allocation, process further or sell.
A diagram of the situation is in Solution Exhibit 1629.
1.
a. Sales value at splitoff method.
Monthly Selling Sales Value
Unit Price of Total Prodn. Joint Costs
Output Per Unit at Splitoff Weighting Allocated
Studs (Building) 75,000 $ 8 $ 600,000 46.1539% $ 461,539
Decorative Pieces 5,000 60 300,000 23.0769 230,769
Posts 20,000 20 400,000 30.7692 307,692
Totals $1,300,000 100.0000% $1,000,000
b. Physical measure method.
Physical
Measure of Joint Costs
Total Prodn. Weighting Allocated
Studs (Building) 75,000 75.00% $ 750,000
Decorative Pieces 5,000 5.00 50,000
Posts 20,000 20.00 200,000
Totals 100,000 100.00% $1,000,000
c. Net realizable value method.
Fully
Processed Net
Monthly Selling Realizable
Units of Price Value at Joint Costs
Total Prodn. per Unit Splitoff Weighting Allocated
Studs (Building) 75,000 $ 8 $ 600,000 44.4445% $ 444,445
Decorative Pieces 4,500a 100 350,000b 25.9259 259,259
Posts 20,000 20 400,000 29.6296 296,296
Totals $1,350,000 100.0000% $1,000,000
a
5,000 monthly units of output – 10% normal spoilage = 4,500 good units.
b
4,500 good units ´ $100 = $450,000 – Further processing costs of $100,000 = $350,000
2. Presented below is an analysis for Sonimad Sawmill, Inc., comparing the processing of
decorative pieces further versus selling the roughcut product immediately at splitoff:
Units Dollars
Monthly unit output 5,000
Less: Normal further processing shrinkage 500
Units available for sale 4,500
Final sales value (4,500 units ´ $100 per unit) $450,000
Less: Sales value at splitoff 300,000
Incremental revenue 150,000
Less: Further processing costs 100,000
Additional contribution from further processing $ 50,000
1626
27. 3. Assuming Sonimad Sawmill, Inc., announces that in six months it will sell the roughcut
product at splitoff due to increasing competitive pressure, behavior that may be demonstrated by
the skilled labor in the planing and sizing process include the following:
· lower quality,
· reduced motivation and morale, and
· job insecurity, leading to nonproductive employee time looking for jobs elsewhere.
Management actions that could improve this behavior include the following:
· Improve communication by giving the workers a more comprehensive explanation as
to the reason for the change so they can better understand the situation and bring out a
plan for future operation of the rest of the plant.
· The company can offer incentive bonuses to maintain quality and production and
align rewards with goals.
· The company could provide job relocation and internal job transfers.
SOLUTION EXHIBIT 1629
Joint Costs Separable Costs
$1,000,000
Studs
$8 per unit
Raw Decorative Decorative
Processing Pieces
Processing Pieces
$100,000 $100 per unit
$60 per unit
Posts
$20 per unit
Splitoff
Point
1627
28. 1630 (40 min.) Jointcost allocation.
1.
Joint Costs Separable Costs
$20,000
Butter Processing Spreadable
$0.50 per Butter
pound
Milk
Processing
Processing
Buttermilk $0.25 per Buttermilk
pint
SPLITOFF
POINT
a.
Physicalmeasure method:
Butter Buttermilk Total
Physical measure of total production
(10,000 lbs × 2; 20,000 qts × 4) 20,000 cups 80,000 cups 100,000 cups
Weighting, 20,000; 80,000 ¸ 100,000 0.20 0.80
Joint costs allocated,
0.20; 0.80 × $20,000 $4,000 $16,000 $20,000
b. Sales value at splitoff method:
Butter Buttermilk Total
Sales value of total production at splitoff,
10,000 × $2; 20,000 × $1.5 $20,000 $30,000 $50,000
Weighting, $20,000; $30,000 ¸ $50,000 0.40 0.60
Joint costs allocated,
0.40; 0.60 ´ $20,000 $ 8,000 $12,000 $20,000
1628
29. c. Net realizable value method:
Butter Buttermilk Total
Final sales value of total production,
20,000 ´ $2.50; 20,000 ´ $1.50 $50,000 $30,000 $80,000
Deduct separable costs 5,000 0 5,000
Net realizable value $45,000 $30,000 $75,000
Weighting, $45,000; $30,000 ¸ $75,000 0.60 0.40
Joint costs allocated,
0.60; 0.40 ´ $20,000 $12,000 $ 8,000 $20,000
d. Constant grossmargin percentage NRV method:
Step 1:
Final sales value of total production, $80,000
Deduct joint and separable costs, ($20,000 + $5,000) 25,000
Gross margin $55,000
Grossmargin percentage ($55,000 ÷ $80,000) 68.75%
Step 2:
Butter Buttermilk Total
Final sales value of total
production (see 1c.) $50,000 $30,000 $80,000
Deduct gross margin, using overall
grossmargin percentage of sales (68.75%) 34,375 20,625 55,000
Total production costs 15,625 9,375 25,000
Step 3:
Deduct separable costs 5,000 0 5,000
Joint costs allocated $10,625 $ 9,375 $20,000
1629
30. 2. Advantages and disadvantages:
PhysicalMeasure
Advantage: Low information needs. Only knowledge of joint cost and physical
distribution is needed.
Disadvantage: Allocation is unrelated to the revenuegenerating ability of products.
Sales Value at Splitoff
Advantage: Considers market value of products as basis for allocating joint cost. Relative
sales value serves as a proxy for relative benefit received by each product from the joint
cost.
Disadvantage: Uses selling price at the time of splitoff even if product is not sold by the
firm in that form. Selling price may not exist for product at splitoff.
Net Realizable Value
Advantages: Allocates joint costs using ultimate net value of each product; applicable
when the option to process further exists
Disadvantages: High information needs; Makes assumptions about expected outcomes of
future processing decisions
Constant GrossMargin percentage method
Advantage: Since it is necessary to produce all joint products, they all look equally
profitable.
Disadvantages: High information needs. All products are not necessarily equally
profitable; method may lead to negative cost allocations so that unprofitable products are
subsidized by profitable ones.
3. When selling prices for all products exist at splitoff, the sales value at split off method is the
preferred technique. It is a relatively simple technique that depends on a common basis for cost
allocation – revenues. It is better than the physical method because it considers the relative
market values of the products generated by the joint cost when seeking to allocate it (which is a
surrogate for the benefits received by each product from the joint cost). Further, the sales value
at splitoff method has advantages over the NRV method and the constant gross margin
percentage method because it does not penalize managers by charging more for developing
profitable products using the output at splitoff, and it requires no assumptions about future
processing activities and selling prices.
1630
31. 1631 (10 min.) Further processing decision (continuation of 1630).
1.and 2. The decision about which combination of products to produce is not affected by the
method of joint cost allocation. For both the sales value at splitoff and physical measure
methods, the relevant comparisons are as shown below:
Butter Buttermilk
Revenue if sold at splitoff $20,000 a $30,000 b
Process further NRV 45,000 c 26,000 d
Profit (Loss) from processing further $25,000 $(4,000)
a
10,000 lbs × $2 = $20,000
b
20,000 qts × $1.5 = $30,000
c
20,000 tubs × $2.5 – 10,000lbs × $.5 = $45,000
d
40,000 pints × $.9 – 40,000 pints × $.25 = $26,000
To maximize profits, Elsie should process butter further into spreadable butter. However, Elsie
should sell the buttermilk at the splitoff point in quart containers. The extra cost to convert to
pint containers ($0.25 per pint × 2 pints per quart = $0.50 per quart) exceeds the increase in
selling price ($0.90 per pint × 2 pints per quart = $1.80 per quart – $1.50 original price = $0.30
per quart) and leads to a loss of $4,000.
3. The decision to sell a product at split off or to process it further should have nothing to do
with the allocation method chosen. For each product, you need to compare the revenue from
selling the product at split off to the NRV from processing the product further. Other things
being equal, management should choose the higher alternative. The total joint cost is the same
regardless of the alternative chosen and is therefore irrelevant to the decision.
1631
32. 1632 (20 min.) Jointcost allocation with a byproduct.
1. Sales value at splitoff method: Byproduct recognized at time of production method
Joint cost to be charged to joint products = Joint Cost – NRV of Byproduct
= $10,000 – 1000 tons × 20% × 0.25 vats × $60
= $10,000 – 50 vats × $60
= $ 7,000
Grade A Grade B Total
Coal Coal
Sales value of coal at splitoff,
1,000 tons × 0.4 × $100; 1,000 tons × 0.4 × $60 $40,000 $24,000 $64,000
Weighting, $40,000; $24,000 ¸ $64,000 0.625 0.375
Joint costs allocated,
0.625; 0.375 × $7,000 $ 4,375 $ 2,625 $ 7,000
Gross margin (Sales revenue ─ Allocated cost) $35,625 $21,375 $57,000
2. Sales value at splitoff method: Byproduct recognized at time of sale method
Joint cost to be charged to joint products = Total Joint Cost = $10,000
Grade A Grade B Total
Coal Coal
Sales value of coal splitoff,
1,000 tons × .4 × $100; 1,000 tons × .4 × $60 $40,000 $24,000 $64,000
Weighting, $40,000; $24,000 ¸ $64,000 0.625 0.375
Joint costs allocated,
0.625; 0.375 × $10,000 $ 6,250 $ 3,750 $10,000
Gross margin (Sales revenue ─ Allocated cost) $33,750 $20,250 $54,000
Since the entire production is sold during the period, the overall gross margin is the same
under the production and sales methods. In particular, under the sales method, the $3,000
received from the sale of the coal tar is added to the overall revenues, so that Cumberland’s
overall gross margin is $57,000, as in the production method.
3. The production method of accounting for the byproduct is only appropriate if
Cumberland is positive they can sell the byproduct and positive of the selling price.
Moreover, Cumberland should view the byproduct’s contribution to the firm as material
enough to find it worthwhile to record and track any inventory that may arise. The sales
method is appropriate if either the disposition of the byproduct is unsure or the selling price
is unknown, or if the amounts involved are so negligible as to make it economically
infeasible for Cumberland to keep track of byproduct inventories.
1632
33. 1633 (15 min.) Byproduct journal entries (continuation of 1632).
1. Byproduct – production method journal entries
i) At time of production:
Workinprocess Inventory 10,000
Accounts Payable, etc. 10,000
For byproduct:
Finished Goods Inv – Coal tar 3,000
Workinprocess Inventory 3,000
For Joint Products
Finished Goods Inv – Grade A 4,375
Finished Goods Inv – Grade B 2,625
Workinprocess Inventory 7,000
ii) At time of sale:
For byproduct
Cash or A/R 3,000
Finished Goods Inv – Coal Tar 3,000
For Joint Products
Cash or A/R 64,000
Sales Revenue – Grade A 40,000
Sales Revenue – Grade B 24,000
Cost of goods sold Grade A 4,375
Cost of goods sold Grade B 2,625
Finished Goods Inv – Grade A 4,375
Finished Goods Inv – Grade B 2,625
1633
34. 2. Byproduct – sales method journal entries
i) At time of production:
Workinprocess Inventory 10,000
Accounts Payable, etc. 10,000
For byproduct:
No entry
For Joint Products
Finished Goods Inv – Grade A 6,250
Finished Goods Inv – Grade B 3,750
Work in process inventory 10,000
ii) At time of sale
For byproduct
Cash or A/R 3,000
Sales Revenue – Coal Tar 3,000
For Joint Products
Cash or A/R 64,000
Sales Revenue – Grade A 40,000
Sales Revenue – Grade B 24,000
Cost of goods sold Grade A 6,250
Cost of goods sold Grade B 3,750
Finished Goods Inv – Grade A 6,250
Finished Goods Inv – Grade B 3,750
1634
35. 1634 (40 min.) Process further or sell, byproduct.
1. The analysis shown below indicates that it would be more profitable for Newcastle
Mining Company to continue to sell bulk raw coal without further processing. This analysis
ignores any value related to coal fines. It also assumes that the costs of loading and shipping the
bulk raw coal on river barges will be the same whether Newcastle sells the bulk raw coal directly
or processes it further.
Incremental sales revenues:
a
Sales revenue after further processing (9,400,000 tons ´ $36) $338,400,000
Sales revenue from bulk raw coal (10,000,000 tons ´ $27) 270,000,000
Incremental sales revenue 68,400,000
Incremental costs:
Direct labor 800,000
Supervisory personnel 200,000
Heavy equipment costs ($25,000 ´ 12 months) 300,000
Sizing and cleaning (10,000,000 tons ´ $3.50) 35,000,000
Outbound rail freight (9,400,000 tons ¸ 60 tons) ´ $240 per car 37,600,000
Incremental costs 73,900,000
Incremental gain (loss) $ (5,500,000)
a
10,000,000 tons ´ (1– 0.06)
2. The cost of producing the raw coal is irrelevant to the decision to process further or not.
As we see from requirement 1, the cost of producing raw coal does not enter any of the
calculations related to either the incremental revenues or the incremental costs of further
processing. The answer would the same as in requirement 1: do not process further.
3. The analysis shown below indicates that the potential revenue from the coal fines
byproduct would result in additional revenue, ranging between $4,950,000 and $9,900,000,
depending on the market price of the fines.
Coal fines = 75% of 6% of raw bulk tonnage
= 0.75 ´ (10,000,000 ´ .06)
= 450,000 tons
Potential incremental income from preparing and selling the coal fines:
Minimum Maximum
Incremental income per ton $11 ($15 – $4) $22 ($24 – $2)
(Market price – Incremental costs)
Incremental income ($11; $22 ´ 450,000) $4,950,000 $9,900,000
The incremental loss from sizing and cleaning the raw coal is $5,500,000, as calculated in
requirement 1. Analysis indicates that relative to selling bulk raw coal, the effect of further
processing and selling coal fines is only slightly negative at the minimum incremental gain
1635
36. ($4,950,000 – $5,500,000 = – $550,000) and very beneficial at the maximum incremental gain
($9,900,000 – $5,500,000 = $4,400,000). NMC will benefit from further processing and selling
the coal fines as long as its incremental income per ton of coal fines is at least $12.22
($5,500,000 ¸ 450,000 tons). Hence, further processing is preferred.
Note that other than the financial implications, some factors that should be considered in
evaluating a sellorprocessfurther decision include:
· Stability of the current customer market for raw coal and how it compares to the
market for sized and cleaned coal.
· Storage space needed for the coal fines until they are sold and the handling costs of
coal fines.
· Reliability of cost (e.g., rail freight rates) and revenue estimates, and the risk of
depending on these estimates.
· Timing of the revenue stream from coal fines and impact on the need for liquidity.
· Possible environmental problems, i.e., dumping of waste and smoke from
unprocessed coal.
1635 (30 min.) Accounting for a byproduct.
1. Byproduct recognized at time of production:
Joint cost = ($300 × 50) + $10,000 = $25,000
Joint cost charged to main product = Joint cost – NRV of byproduct
= $25,000 – (6 × 50 scarves × $25)
= $25,000 – (300 scarves × $25)
= $17,500
$17,500
Inventoriable cost of main product = = $11.67 per blouse
1,500 blouses
Inventoriable cost of byproduct = NRV = $25 per scarf
Gross Margin Calculation under Production Method
Revenues
Main product: Blouses (1,200 blouses × $90) $108,000
Byproduct: Scarves 0
108,000
Cost of goods sold
Main product: Blouses (1,200 blouses × $11.67) 14,000
Gross margin $ 94,000
Grossmargin percentage ($94,000 ÷ $108,000) 87.04%
Inventoriable costs (end of period):
Main product: Blouses (300 blouses × $11.67) = $3,500
Byproduct: Scarves (40 scarves × $25) = $1,000
1636