Disponemos de la siguiente gama de producto: cables coaxiales 50Ω y 75Ω, tipos RG, LMR y cables RF 50 Ω FOAM y Air Dielectric, diseñados para cubrir las instalaciones de radio telefonía celular y Broadcast, TV y Radio, disponibles en cuarrugado aluminio y cobre, con cubiertas en PE, LSZH, PVC y Z, resistente al fuego.
El cable coaxial Silexst, sus conectores y accesorios están diseñados para proporcionar una óptima comunicación para toda la gama de aplicaciones en radiofrecuencia.
Cables radiantes, también denominados Leaky Feeder o Radiating Cable. Con esta tecnología va a permitir disponer de frecuencia banda ancha a lo largo de todo el recorrido donde vaya instalado el cable. Normalmente se instalan en túneles, minas, bien un parking o cualquier otro lugar donde se requiera de cobertura movil o radio.
T&D are distributors for ABB Kabeldon High Voltage Cable Joints, Cable Terminations and Screened Separable Connectors for high voltage XLPE cable terminating and jointing 11kV, 24kV and 33kV. ABB HV cable connectors are premolded screened separable connectors for terminating and connecting XLPE insulated single or three core cables with copper or aluminium conductors, 11-24kV-33kV, into high voltage switchgear and transformers.
ABB connectors terminate high voltage cables with copper wire and copper tape screens, with or without aluminium (AWA) or steel wire armour (SWA) inot switchgear and transformers.
Cables radiantes, también denominados Leaky Feeder o Radiating Cable. Con esta tecnología va a permitir disponer de frecuencia banda ancha a lo largo de todo el recorrido donde vaya instalado el cable. Normalmente se instalan en túneles, minas, bien un parking o cualquier otro lugar donde se requiera de cobertura movil o radio.
T&D are distributors for ABB Kabeldon High Voltage Cable Joints, Cable Terminations and Screened Separable Connectors for high voltage XLPE cable terminating and jointing 11kV, 24kV and 33kV. ABB HV cable connectors are premolded screened separable connectors for terminating and connecting XLPE insulated single or three core cables with copper or aluminium conductors, 11-24kV-33kV, into high voltage switchgear and transformers.
ABB connectors terminate high voltage cables with copper wire and copper tape screens, with or without aluminium (AWA) or steel wire armour (SWA) inot switchgear and transformers.
Cable Glands, Connectors and Accessories Exd/Exe
PX2K Flameproof Ex d, Increased Safety Ex e, Restricted Breathing Ex nR Compound Barrier Cable Gland
E1FW Globally Approved, Explosive
Atmosphere Cable Gland
For all types of Steel & Aluminium Wire
Armoured Cables
CMP PX2K Cable Glands (Barrier Glands Exd Flameproof with ATEX Certification for Hazardous Areas)
Cable Gland Size 20S/16 (M20) 1/2" NPT Entry Thread Standard, 3/4" NPT Optional
Cable Gland Suits Cable Diameters 6.1mm-11.5mm
CMP PX2K barrier cable glands are ATEX certified and suitable for use with all forms of equipment protection permitted in Zone 1, Zone 2, Zone 21 and Zone 22. Flameproof compound filled barrier glands for cable terminations within ATEX areas are supplied with a "universal" reversible armour ring to suit all types of armoured cables - this includes steel wire armoured (SWA), steel tape armoured (STA) and wire braided cables for installation within hazardous areas. Barrier cable glands provide a compound barrier seal around the cable conductors and an environmental seal on the cable outer sheath. The CMP PX2K cable gland provides a mechanical cable retention and electrical continuity via the cable armour termination. A combined detachable armour cone and compound tube, together with AnyWay universal cable clamping ring arrangement allows the cable to be easily disconnected from the electrical equipment and easily re-connected. This cable gland feature facilitates remote make off procedures when the cable termination is to be conducted in confined spaces or in areas of restricted access.
Cable Glands are suitable for following cable types - Wire Braid Armour, Single Steel Wire Armour (SWA), Screened Flexible Wire Braid (eg CY or SY), Steel Tape Armour (STA), Pliable Wire Armour (PWA)
Cable Sealing Area - Inner Compound Barrier and Cable Outer Sheath
CMP PX2K cable glands with offshore and marine approvals including Lloyds, DNV and ABS are available - LSF cable gland shrouds available for low smoke and fume cable terminations.
Craig and Derricott Isolators
Isolation Equipment and Switch Disconnectors
Moulded Plastic Isolators & Switch Disconnectors IP65 20A-63A
Mild Steel Isolators & Switch Disconnectors IP65 20A-63A
Stainless Steel Isolators & Switch Disconnectors IP65 20A-63A
Die Cast Isolators & Switch Disconnectors IP65 20A-63A
Sheet Steel Isolators & Switch Disconnectors IP41 32A-630A
Sheet Steel Isolators & Switch Disconnectors IP65 32A-1000A
ATEX Zone 22 Isolators& Switch Disconnectors Cat 3D
Fire Rated Isolators & Switch Disconnectors 20A-125A
Isolation Equipment and Switch Disconnectors
Craig & Derricott Section 12 London Underground Isolators
Craig & Derricott Stainless Steel Water Utility Isolators
Lucy Lighting Street Lighting Trojan Isolators
Switch Disconnectors (Isolators) provide the means to safely disconnect or isolate an item of electrical equipment from the power supply - primarily designed to provide a means of local isolation when an elecrical item may need maintenance or repair. Switch Disconnectors also i) provide an effective clearance between the supply and the electrical load appropriate to the voltage applied, ii) provide a means of "locking off" (padlocking), iii) provide true indication of contact state, iv) provide a safe electrical disconnection from the power supply even under fault conditions.
RG58 and LMR400 all coax cables. This article is going to talk about the detailed information about RG58 and LMR400, and interpret the differences between them.
If you want to learn more, try to follow the below link to see the article.
https://www.utmel.com/components/rg58-vs-lmr400-which-one-is-better?id=1492
Gleam Electric and Power Company was incepted in 2013 and is supplying, trading, distributing and wholesaling a diverse range of Electrical Power Cables & Wires. Our product range is regarded by our clients for being interesting and includes Power Cables, Electrical Cables and Copper Flexible Wires. These cables are known for being long lasting, perfect in terms of finish, resistant to wear & tear and non corrosive.
Nexans Euromold 400 series screened separable connectors are EPDM pre-moulded,high voltage cable terminations for 6.6kV, 11kV, 15kV, 24kV and 33kV electrical equipment including switchgear, transformers and motors.
Nexans Euromold 400 series separable connectors include Euromold elbow connectors, Euromold tee connectors, Euromold bushings (oil insulated) and Euromold surge arresters to protect electrical equipment up to 33kV.
Nexans Euromold Separable Elbow Connectors 400 Series, 400TB 440TB Features :
Connector for terminating high voltage polymeric (XLPE EPR) cables, 11-33kV
Plug in bolted tee connectors with current rating 630amps and 1250amps
Conductive EPDM jacket provides a touch safe screened termination
Suits copper wire and copper tape screened cable, 35-300sqmm
Type C 630A interface to CENELEC EN50180
T&D UK with the support of Nexans provide installation training and certification for experienced high voltage cable jointers up to 33kV.
Cable Glands, Connectors and Accessories Exd/Exe
PX2K Flameproof Ex d, Increased Safety Ex e, Restricted Breathing Ex nR Compound Barrier Cable Gland
E1FW Globally Approved, Explosive
Atmosphere Cable Gland
For all types of Steel & Aluminium Wire
Armoured Cables
CMP PX2K Cable Glands (Barrier Glands Exd Flameproof with ATEX Certification for Hazardous Areas)
Cable Gland Size 20S/16 (M20) 1/2" NPT Entry Thread Standard, 3/4" NPT Optional
Cable Gland Suits Cable Diameters 6.1mm-11.5mm
CMP PX2K barrier cable glands are ATEX certified and suitable for use with all forms of equipment protection permitted in Zone 1, Zone 2, Zone 21 and Zone 22. Flameproof compound filled barrier glands for cable terminations within ATEX areas are supplied with a "universal" reversible armour ring to suit all types of armoured cables - this includes steel wire armoured (SWA), steel tape armoured (STA) and wire braided cables for installation within hazardous areas. Barrier cable glands provide a compound barrier seal around the cable conductors and an environmental seal on the cable outer sheath. The CMP PX2K cable gland provides a mechanical cable retention and electrical continuity via the cable armour termination. A combined detachable armour cone and compound tube, together with AnyWay universal cable clamping ring arrangement allows the cable to be easily disconnected from the electrical equipment and easily re-connected. This cable gland feature facilitates remote make off procedures when the cable termination is to be conducted in confined spaces or in areas of restricted access.
Cable Glands are suitable for following cable types - Wire Braid Armour, Single Steel Wire Armour (SWA), Screened Flexible Wire Braid (eg CY or SY), Steel Tape Armour (STA), Pliable Wire Armour (PWA)
Cable Sealing Area - Inner Compound Barrier and Cable Outer Sheath
CMP PX2K cable glands with offshore and marine approvals including Lloyds, DNV and ABS are available - LSF cable gland shrouds available for low smoke and fume cable terminations.
Craig and Derricott Isolators
Isolation Equipment and Switch Disconnectors
Moulded Plastic Isolators & Switch Disconnectors IP65 20A-63A
Mild Steel Isolators & Switch Disconnectors IP65 20A-63A
Stainless Steel Isolators & Switch Disconnectors IP65 20A-63A
Die Cast Isolators & Switch Disconnectors IP65 20A-63A
Sheet Steel Isolators & Switch Disconnectors IP41 32A-630A
Sheet Steel Isolators & Switch Disconnectors IP65 32A-1000A
ATEX Zone 22 Isolators& Switch Disconnectors Cat 3D
Fire Rated Isolators & Switch Disconnectors 20A-125A
Isolation Equipment and Switch Disconnectors
Craig & Derricott Section 12 London Underground Isolators
Craig & Derricott Stainless Steel Water Utility Isolators
Lucy Lighting Street Lighting Trojan Isolators
Switch Disconnectors (Isolators) provide the means to safely disconnect or isolate an item of electrical equipment from the power supply - primarily designed to provide a means of local isolation when an elecrical item may need maintenance or repair. Switch Disconnectors also i) provide an effective clearance between the supply and the electrical load appropriate to the voltage applied, ii) provide a means of "locking off" (padlocking), iii) provide true indication of contact state, iv) provide a safe electrical disconnection from the power supply even under fault conditions.
RG58 and LMR400 all coax cables. This article is going to talk about the detailed information about RG58 and LMR400, and interpret the differences between them.
If you want to learn more, try to follow the below link to see the article.
https://www.utmel.com/components/rg58-vs-lmr400-which-one-is-better?id=1492
Gleam Electric and Power Company was incepted in 2013 and is supplying, trading, distributing and wholesaling a diverse range of Electrical Power Cables & Wires. Our product range is regarded by our clients for being interesting and includes Power Cables, Electrical Cables and Copper Flexible Wires. These cables are known for being long lasting, perfect in terms of finish, resistant to wear & tear and non corrosive.
Nexans Euromold 400 series screened separable connectors are EPDM pre-moulded,high voltage cable terminations for 6.6kV, 11kV, 15kV, 24kV and 33kV electrical equipment including switchgear, transformers and motors.
Nexans Euromold 400 series separable connectors include Euromold elbow connectors, Euromold tee connectors, Euromold bushings (oil insulated) and Euromold surge arresters to protect electrical equipment up to 33kV.
Nexans Euromold Separable Elbow Connectors 400 Series, 400TB 440TB Features :
Connector for terminating high voltage polymeric (XLPE EPR) cables, 11-33kV
Plug in bolted tee connectors with current rating 630amps and 1250amps
Conductive EPDM jacket provides a touch safe screened termination
Suits copper wire and copper tape screened cable, 35-300sqmm
Type C 630A interface to CENELEC EN50180
T&D UK with the support of Nexans provide installation training and certification for experienced high voltage cable jointers up to 33kV.
400 Series Interface B Nexans Euromold Cable Connectors and Bushings connect and terminate HV cables to Interface B bushings on switchgear and transformers.
Nexans Euromold provide high voltage cable accessories to suit the 7 main bushing interfaces : A, B, C (Compact), C (Symmetrical), D, E and F.
Nexans Euromold cable joints, cable terminations, epoxy bushings, angled (elbow) and straight plug-in or bolted separable connectors for connecting, jointing and terminating high voltage cables.
400 Series Interface C Nexans Euromold Cable Connectors and Bushings connect and terminate HV cables to Interface C bushings on switchgear and transformers.
Nexans Euromold provide high voltage cable accessories to suit the 7 main bushing interfaces : A, B, C (Compact), C (Symmetrical), D, E and F.
Nexans Euromold cable joints, cable terminations, epoxy bushings, angled (elbow) and straight plug-in or bolted separable connectors for connecting, jointing and terminating high voltage cables.
Datwyler universal safety fire fiber cabel info tech middle eastAli Shoaee
Datwyler Universal Fiber Optic Fire Safety cable E30 - 30 minutes System Circuit Integrity ..
Metal-free, water resistant, rodent protection,
in accordance with IEC 60332.1 and IEC 60332.3 C
30 minutes System Circuit Integrity according to DIN 4102-12
Application :
Safety applications in tunnels, underground railways, banks, insurance companies, large-scale industry , Public Area , Mall , Towers .
Fiber optic LAN backbone.
Indoor and outdoor cabling.
Can be installed in cable platforms, trays, ducts and vertical shafts.
Can be spliced in FO distributors.
Zero halogen, no corrosive gases :
IEC 60754-1/-2, EN 60754-1/-2, VDE 0482-754-1/-2
Flame propagation:
IEC 60332-1/-2, EN 60332-1-2, VDE 0482-332-1-2
Flame spread:
IEC 60332.3 C, EN 50266-2-4, VDE 0482-266-2-4
Smoke density:
IEC 61034-1/-2, EN 61034-1/-2 (EN 50268-1/-2), VDE 0482-1034-1/-2 (VDE 0482-268-1/-2)
Circuit Integrity (FE180):
IEC 60331-11, IEC 60331-25, VDE 0472 part 814, EN 50200 PH 90, EN 50362, VDE 0482-200, VDE 0482-362:
System circuit integrity
according to DIN 4102 part 12, VKF Fire Safety Application No. 24176
Please Contact Info Tech Middle East for more Detail : Info@InfoTechME.ws
Nexans Euromold Connectors Interface D 600 Series
Nexans Euromold 675LR Connector
1250A 11kV Dead Break Connectors 35-800sqmm
Nexans Euromold 675LR connector suits 11kV/12kV polymeric insulated cables (XLPE EPR), rated up to 1250amps with copper or aluminium conductors 35-800sqmm.
Interface type D Nexans Euromold 5/8" bolted tee connector, for high voltage cable connecting and termination applications up to 24kV. 1250amp (copper stud) application separable connector is designed to connect polymeric (XLPE EPR) cables to a 5/8" copper, 600 series bushings.
Nexans Euromold Connectors Interface D 600 Series
Nexans Euromold 650LR Connector
800A 11kV Dead Break Connectors 35-630sqmm
Interface type D Nexans Euromold 5/8" bolted tee connector, for high voltage cable connecting and termination applications up to 24kV. 800amp (aluminium stud) application separable connector is designed to connect polymeric (XLPE EPR) cables to a 5/8" aluminium stud, 600 series bushings.
Nexans Euromold K650LR connector suits 24kV polymeric insulated cables (XLPE EPR), rated up to 800amps with copper or aluminium conductors 35-630sqmm.
Interface type D Nexans Euromold 5/8" bolted tee connector, for high voltage cable connecting and termination applications up to 24kV. 800amp (aluminium stud) application separable Nexans Euromold connector is designed to connect polymeric (XLPE EPR) cables to a 5/8" aluminium stud, 600 series bushings.
Nexans Euromold 600 series screened separable connectors are EPDM pre-moulded, high voltage cable terminations for 6.6kV, 11kV, 15kV and 24kV electrical equipment including switchgear, transformers and motors.
Nexans Euromold 600 series separable connectors include Nexans Euromold bolted tee connectors and Nexans Euromold bushings (oil and air insulated) for electrical equipment up to 24kV - 1250A. Nexans Euromold 600 series connectors are specified to terminate and connect polymeric (XLPE or EPR) screened (copper tape and wire) cables to ANSI-style Interface Type D (800amp) bushings with either copper or aluminium 5/8" bolted connection.
State of ICS and IoT Cyber Threat Landscape Report 2024 previewPrayukth K V
The IoT and OT threat landscape report has been prepared by the Threat Research Team at Sectrio using data from Sectrio, cyber threat intelligence farming facilities spread across over 85 cities around the world. In addition, Sectrio also runs AI-based advanced threat and payload engagement facilities that serve as sinks to attract and engage sophisticated threat actors, and newer malware including new variants and latent threats that are at an earlier stage of development.
The latest edition of the OT/ICS and IoT security Threat Landscape Report 2024 also covers:
State of global ICS asset and network exposure
Sectoral targets and attacks as well as the cost of ransom
Global APT activity, AI usage, actor and tactic profiles, and implications
Rise in volumes of AI-powered cyberattacks
Major cyber events in 2024
Malware and malicious payload trends
Cyberattack types and targets
Vulnerability exploit attempts on CVEs
Attacks on counties – USA
Expansion of bot farms – how, where, and why
In-depth analysis of the cyber threat landscape across North America, South America, Europe, APAC, and the Middle East
Why are attacks on smart factories rising?
Cyber risk predictions
Axis of attacks – Europe
Systemic attacks in the Middle East
Download the full report from here:
https://sectrio.com/resources/ot-threat-landscape-reports/sectrio-releases-ot-ics-and-iot-security-threat-landscape-report-2024/
GraphRAG is All You need? LLM & Knowledge GraphGuy Korland
Guy Korland, CEO and Co-founder of FalkorDB, will review two articles on the integration of language models with knowledge graphs.
1. Unifying Large Language Models and Knowledge Graphs: A Roadmap.
https://arxiv.org/abs/2306.08302
2. Microsoft Research's GraphRAG paper and a review paper on various uses of knowledge graphs:
https://www.microsoft.com/en-us/research/blog/graphrag-unlocking-llm-discovery-on-narrative-private-data/
Slack (or Teams) Automation for Bonterra Impact Management (fka Social Soluti...Jeffrey Haguewood
Sidekick Solutions uses Bonterra Impact Management (fka Social Solutions Apricot) and automation solutions to integrate data for business workflows.
We believe integration and automation are essential to user experience and the promise of efficient work through technology. Automation is the critical ingredient to realizing that full vision. We develop integration products and services for Bonterra Case Management software to support the deployment of automations for a variety of use cases.
This video focuses on the notifications, alerts, and approval requests using Slack for Bonterra Impact Management. The solutions covered in this webinar can also be deployed for Microsoft Teams.
Interested in deploying notification automations for Bonterra Impact Management? Contact us at sales@sidekicksolutionsllc.com to discuss next steps.
UiPath Test Automation using UiPath Test Suite series, part 4DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 4. In this session, we will cover Test Manager overview along with SAP heatmap.
The UiPath Test Manager overview with SAP heatmap webinar offers a concise yet comprehensive exploration of the role of a Test Manager within SAP environments, coupled with the utilization of heatmaps for effective testing strategies.
Participants will gain insights into the responsibilities, challenges, and best practices associated with test management in SAP projects. Additionally, the webinar delves into the significance of heatmaps as a visual aid for identifying testing priorities, areas of risk, and resource allocation within SAP landscapes. Through this session, attendees can expect to enhance their understanding of test management principles while learning practical approaches to optimize testing processes in SAP environments using heatmap visualization techniques
What will you get from this session?
1. Insights into SAP testing best practices
2. Heatmap utilization for testing
3. Optimization of testing processes
4. Demo
Topics covered:
Execution from the test manager
Orchestrator execution result
Defect reporting
SAP heatmap example with demo
Speaker:
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
Builder.ai Founder Sachin Dev Duggal's Strategic Approach to Create an Innova...Ramesh Iyer
In today's fast-changing business world, Companies that adapt and embrace new ideas often need help to keep up with the competition. However, fostering a culture of innovation takes much work. It takes vision, leadership and willingness to take risks in the right proportion. Sachin Dev Duggal, co-founder of Builder.ai, has perfected the art of this balance, creating a company culture where creativity and growth are nurtured at each stage.
Key Trends Shaping the Future of Infrastructure.pdfCheryl Hung
Keynote at DIGIT West Expo, Glasgow on 29 May 2024.
Cheryl Hung, ochery.com
Sr Director, Infrastructure Ecosystem, Arm.
The key trends across hardware, cloud and open-source; exploring how these areas are likely to mature and develop over the short and long-term, and then considering how organisations can position themselves to adapt and thrive.
LF Energy Webinar: Electrical Grid Modelling and Simulation Through PowSyBl -...DanBrown980551
Do you want to learn how to model and simulate an electrical network from scratch in under an hour?
Then welcome to this PowSyBl workshop, hosted by Rte, the French Transmission System Operator (TSO)!
During the webinar, you will discover the PowSyBl ecosystem as well as handle and study an electrical network through an interactive Python notebook.
PowSyBl is an open source project hosted by LF Energy, which offers a comprehensive set of features for electrical grid modelling and simulation. Among other advanced features, PowSyBl provides:
- A fully editable and extendable library for grid component modelling;
- Visualization tools to display your network;
- Grid simulation tools, such as power flows, security analyses (with or without remedial actions) and sensitivity analyses;
The framework is mostly written in Java, with a Python binding so that Python developers can access PowSyBl functionalities as well.
What you will learn during the webinar:
- For beginners: discover PowSyBl's functionalities through a quick general presentation and the notebook, without needing any expert coding skills;
- For advanced developers: master the skills to efficiently apply PowSyBl functionalities to your real-world scenarios.
Let's dive deeper into the world of ODC! Ricardo Alves (OutSystems) will join us to tell all about the new Data Fabric. After that, Sezen de Bruijn (OutSystems) will get into the details on how to best design a sturdy architecture within ODC.
Connector Corner: Automate dynamic content and events by pushing a buttonDianaGray10
Here is something new! In our next Connector Corner webinar, we will demonstrate how you can use a single workflow to:
Create a campaign using Mailchimp with merge tags/fields
Send an interactive Slack channel message (using buttons)
Have the message received by managers and peers along with a test email for review
But there’s more:
In a second workflow supporting the same use case, you’ll see:
Your campaign sent to target colleagues for approval
If the “Approve” button is clicked, a Jira/Zendesk ticket is created for the marketing design team
But—if the “Reject” button is pushed, colleagues will be alerted via Slack message
Join us to learn more about this new, human-in-the-loop capability, brought to you by Integration Service connectors.
And...
Speakers:
Akshay Agnihotri, Product Manager
Charlie Greenberg, Host
4. Página
| 4
Coaxial Cable - Comparison of different cable types
The product range includes high- frequency coaxial connectors and cables, RF- test & measurement products, as well as
infrastructure site solutions, connectors, cables or accessories for radio base stations.
Image Overview Type Section Inner conductor Outer conductor Jacket options Order number
Superflexible Cables SilexFlex
1/4" Copper-Clad Aluminum Wire Corrugated Copper Tube
PE
LCF14HR
HL-FR-Z LCF14HRZ
3/8" Copper-Clad Aluminum Wire Corrugated Copper Tube
PE LCF38HR
HL-FR-Z LCF38HRZ
1/2" Copper-Clad Aluminum Wire Corrugated Copper Tube
PE LCF12HR
HL-FR-Z LCF12HRZ
Flexible Cooper Cables SilexStd
1/4" Copper-Clad Aluminum Wire Corrugated Copper Tube
PE LCF14STD
HL-FR-Z LCF14STDZ
3/8" Copper-Clad Aluminum Wire Corrugated Copper Tube
PE LCF38STD
HL-FR-Z LCF38STDZ
1/2" Copper-Clad Aluminum Wire Corrugated Copper Tube
PE LCF12STD
HL-FR-Z LCF12STDZ
5/8" Smooth Copper Tube Corrugated Copper Tube
PE LCF58STD
HL-FR-Z LCF58STDZ
7/8" Smooth Copper Tube Corrugated Copper Tube
PE LCF78STD
HL-FR-Z LCF78STDZ
1-1/4" Smooth Copper Tube Corrugated Copper Tube
PE LCF114STD
HL-FR-Z LCF114STDZ
1-5/8" Helical Copper Tube Corrugated Copper Tube
PE LCF158STD
HL-FR-Z LCF158STDZ
2-1/4" Helical Copper Tube Corrugated Copper Tube
PE LCF214STD
HL-FR-Z LCF214STDZ
Flexible Aluminum
Cables
SilexStl
1/2" Copper-Clad Aluminum Wire
Corrugated Aluminium
Tube
PE LCF12STL
HL-FR-Z LCF12STLZ
7/8" Smooth Copper Tube
Corrugated Aluminium
Tube
PE LCF78STL
HL-FR-Z LCF78STLZ
1-1/4" Smooth Copper Tube
Corrugated Aluminium
Tube
PE LCF114STL
HL-FR-Z LCF114STLZ
1-5/8" Helical Copper Tube
Corrugated Aluminium
Tube
PE LCF158STL
HL-FR-Z LCF158STLZ
Jacket: PE
Standard Polyethylene, PE, Metalhydroxite Filling, UV resistant PE jacket, halogen free according to IEC 60754
Jacket: HL-FR-Z
Halogen Free & Fire resistant (Z)
Test on flammability of single cables Test in accordance with: IEC 60332-1-2 EN 60332-1-2
Test on flammability of cable bundles Test in accordance with: IEC 60332-3 Cat. C EN 50266-2-4 Cat. C
Test on smoke density Test in accordance with: IEC 61034-1 and -2 EN 61034-1 and -2
Test on corrosive gas emissions Test in accordance with: IEC 60754-2 EN 50267-2-2
Test on insulation integrity Test in accordance with: IEC 60331-23 VDE 0472 Part 814
5. Página
| 5
General
LCF12STD(Z)
LCF12STD(Z), Silexstd ® RF Low Density Foam Coaxial Cable 1/2", corrugated
copper, 1/2 in, Black PE or Low Smoke Halogen-free Fire-retardant (Z).
Type HCAAY(Z)-50-12
Construction Materials
Inner Conductor Copper-Clad Aluminum Wire
Dielectric Physical Foam Polyethylene
Outer Conductor Corrugated Copper Tube
Jacket Black PE or Low Smoke Halogen-free Fire-retardant
Physical Dimensions
Inner Conductor Diameter 4.80 mm
Dielectric Diameter 12.30 mm
Outer Conductor Diameter 13.80 mm
Diameter Over Jacket 15.70 mm
Mechanical Specifications
Minimum Bending Radius
Single Bending 50 mm
Repeated Bending 125 mm
Minimum Number of Bends 15
Tensile Strength 1100 N (247 lb)
Electrical Specifications
Capacitance 76.0 pF/m (23.2 pF/ft)
Impedance 50 ± 1 O
Velocity 88%
RF Peak Voltage 1.60 kV
Peak Power Rating 40 kW
Cut-o" Frequency 18.8 GHz
Shielding E"ectiveness>10MHz >120 dB
Insulation resistance 5000M Ω-Km
VSWR
0.8~1.0 GHz ≤1.10
1.7~2.2 GHz ≤1.10
2.2~2.7 GHz ≤1.13
6. Página
| 6
Environmental Specifications
Storage Temperature -55 ˚C ~ +85 ˚C
Installation Temperature -40 ˚C ~ +60 ˚C
Operation Temperature -55 ˚C ~ +85 ˚C
Perforance - Attenuation
Frequency Attenuation Attenuation Average
MHz dB/100 m dB/100 ft Power Rating (kW)
100,00 3,42 1,04 2,23
150,00 4,22 1,29 1,81
200,00 4,90 1,49 1,56
280,00 6,00 1,83 1,27
450,00 7,50 2,29 1,02
800,00 10,20 3,11 0,75
900,00 10,90 3,32 0,71
1000,00 11,60 3,54 0,67
1500,00 14,40 4,39 0,53
1800,00 16,00 4,88 0,48
2000,00 17,00 5,18 0,46
2200,00 17,90 5,46 0,43
2400,00 18,70 5,70 0,42
2500,00 19,30 5,88 0,41
3000,00 21,30 6,49 0,37
Standard Conditions
For Attenuation: VSWR 1.0, Cable temperature 20 °C (68 °F)
For Average Power: VSWR 1.0, Ambient temperature 40 °C (104 °F)
Inner Conductor temperature 100 °C (212 °F). No solar loading.
Maximum attenuation value shall be 105% of the nominal attenuation value.
7. Página
| 7
General
LCF12HR(Z)
LCF12HR(Z), Silexflex ® RF SuperFlexible Foam Coaxial Cable 1/2", corrugated
copper, 1/2 in, Black PE or Low Smoke Halogen-free Fire-retardant (Z).
Type HRCAY(Z)-50-9
Construction Materials
Inner Conductor Copper-Clad Aluminum Wire
Dielectric Physical Foam Polyethylene
Outer Conductor Corrugated Copper Tube
Jacket Black PE or Low Smoke Halogen-free Fire-retardant
Physical Dimensions
Inner Conductor Diameter 3.60 mm
Dielectric Diameter 8.70 mm
Outer Conductor Diameter 12.00 mm
Diameter Over Jacket 13.30 mm
Mechanical Specifications
Minimum Bending Radius
Single Bending 15 mm
Repeated Bending 30 mm
Minimum Number of Bends 15
Tensile Strength 650 N (143 lb)
Electrical Specifications
Capacitance 80.0 pF/m (24.4 pF/ft)
Impedance 50 ± 1 Ω
Velocity 83%
RF Peak Voltage 1.13 kV
Peak Power Rating 19 kW
Cut-off Frequency 12.50 GHz
Shielding Effectiveness>10MHz >120 Db
Insulation resistance 5000M Ω-Km
VSWR
0.8~1.0 GHz ≤1.10
1.7~2.2 GHz ≤1.10
2.2~2.7 GHz ≤1.13
8. Página
| 8
Environmental Specifications
Storage Temperature -55 ˚C ~ +85 ˚C
Installation Temperature -40 ˚C ~ +60 ˚C
Operation Temperature -55 ˚C ~ +85 ˚C
Perforance - Attenuation
Frequency Attenuation Attenuation Average
MHz dB/100 m dB/100 ft Power Rating (kW)
100,00 3,22 0,98 3,03
150,00 4,05 1,23 2,39
200,00 4,65 1,42 2,11
280,00 5,65 1,72 1,69
450,00 7,20 2,19 1,37
800,00 9,86 3,01 1,00
900,00 10,56 3,22 0,94
1000,00 11,15 3,40 0,88
1500,00 13,80 4,21 0,70
1800,00 15,55 4,74 0,63
2000,00 16,40 5,00 0,59
2200,00 17,35 5,29 0,56
2400,00 18,10 5,52 0,53
2500,00 18,50 5,64 0,52
3000,00 20,90 6,37 0,48
Standard Conditions
For Attenuation: VSWR 1.0, Cable temperature 20 °C (68 °F)
For Average Power: VSWR 1.0, Ambient temperature 40 °C (104 °F)
Inner Conductor temperature 100 °C (212 °F). No solar loading.
Maximum attenuation value shall be 105% of the nominal attenuation value
.
9. Página
| 9
General
LCF78STD(Z)
LCF78STD(Z), Silexstd ® RF Low Density Foam Coaxial Cable 7/8”, corrugated
copper, 7/8 in, Black PE or Low Smoke Halogen-free Fire-retardant (Z).
Type HCTAY (Z)-50-22
Construction Materials
Inner Conductor Smooth Copper Tube
Dielectric Physical Foam Polyethylene
Outer Conductor Corrugated Copper Tube
Jacket Black PE or Low Smoke Halogen-free Fire-retardant
Physical Dimensions
Inner Conductor Diameter 9.00 mm
Dielectric Diameter 22.30 mm
Outer Conductor Diameter 24.90 mm
Diameter Over Jacket 27.50 mm
Mechanical Specifications
Minimum Bending Radius
Single Bending 90 mm
Repeated Bending 250 mm
Minimum Number of Bends 15
Tensile Strength 1470 N (330 lb)
Electrical Specifications
Capacitance 75.0 pF/m (22.9 pF/ft)
Impedance 50 ± 1 Ω
Velocity 89%
RF Peak Voltage 3.00 kV
Peak Power Rating 91 kW
Cut-off Frequency 5.20 GHz
Shielding Effectiveness>10MHz >120 dB
Insulation resistance 5000M Ω-Km
VSWR
0.8~1.0 GHz ≤1.10
1.7~2.2 GHz ≤1.10
2.2~2.7 GHz ≤1.13
10. Página
| 10
Environmental Specifications
Storage Temperature -55 ˚C ~ +85 ˚C
Installation Temperature -40 ˚C ~ +60 ˚C
Operation Temperature -55 ˚C ~ +85 ˚C
Perforance - Attenuation
Frequency Attenuation Attenuation Average
MHz dB/100 m dB/100 ft Power Rating (kW)
100,00 1,19 0,36 8,62
150,00 1,47 0,45 7,20
200,00 1,71 0,52 5,99
280,00 2,05 0,62 4,94
450,00 2,64 0,80 3,88
800,00 3,62 1,10 2,83
900,00 3,87 1,18 2,65
1000,00 4,10 1,25 2,50
1500,00 5,16 1,57 1,99
1800,00 5,73 1,75 1,79
2000,00 6,09 1,86 1,68
2200,00 6,44 1,96 1,59
2400,00 6,78 2,07 1,54
2500,00 6,95 2,12 1,50
3000,00 7,74 2,36 1,33
Standard Conditions
For Attenuation: VSWR 1.0, Cable temperature 20 °C (68 °F)
For Average Power: VSWR 1.0, Ambient temperature 40 °C (104 °F)
Inner Conductor temperature 100 °C (212 °F). No solar loading.
Maximum attenuation value shall be 105% of the nominal attenuation value.
11. Página
| 11
General
LCF158STD(Z)
LCF158STD(Z), Silexstd ® RF Low Density Foam Coaxial Cable 1-5/8",
corrugated copper, 1-5/8 in, Black PE or Low Smoke Halogen-free Fire-
retardant (Z).
Type HHTAY(Z)-50-42
Construction Materials
Inner Conductor Helical Copper Tube
Dielectric Physical Foam Polyethylene
Outer Conductor Corrugated Copper Tube
Jacket Black PE or Low Smoke Halogen-free Fire-retardant
Physical Dimensions
Inner Conductor Diameter 17.40 mm
Dielectric Diameter 42.80 mm
Outer Conductor Diameter 46.50 mm
Diameter Over Jacket 49.50 mm
Mechanical Specifications
Minimum Bending Radius
Single Bending 200 mm
Repeated Bending 510 mm
Minimum Number of Bends 15
Tensile Strength 3300 N (750 lb)
Electrical Specifications
Capacitance 76.0 pF/m (23.2 pF/ft)
Impedance 50 ± 1 Ω
Velocity 88%
RF Peak Voltage 5.70 kV
Peak Power Rating 320 kW
Cut-off Frequency 2.80 GHz
Shielding Effectiveness>10MHz >120 dB
Insulation resistance 5000M Ω-Km
VSWR
0.8~1.0 GHz ≤1.10
1.7~2.2 GHz ≤1.10
2.2~2.7 GHz ≤1.13
12. Página
| 12
Environmental Specifications
Storage Temperature -55 ˚C ~ +85 ˚C
Installation Temperature -40 ˚C ~ +60 ˚C
Operation Temperature -55 ˚C ~ +85 ˚C
Perforance - Attenuation
Frequency Attenuation Attenuation Average
MHz dB/100 m dB/100 ft Power Rating (kW)
100,00 0,67 0,20 16,90
150,00 0,84 0,26 13,48
200,00 0,98 0,30 11,60
280,00 1,20 0,37 9,47
450,00 1,53 0,47 7,36
800,00 2,12 0,65 5,26
900,00 2,28 0,69 4,93
1000,00 2,42 0,74 4,61
1500,00 3,09 0,94 3,64
1800,00 3,45 1,05 3,27
2000,00 3,68 1,12 3,00
2200,00 3,91 1,19 2,85
2400,00 4,13 1,26 2,70
2500,00 4,24 1,29 2,61
Standard Conditions
For Attenuation: VSWR 1.0, Cable temperature 20 °C (68 °F)
For Average Power: VSWR 1.0, Ambient temperature 40 °C (104 °F)
Inner Conductor temperature 100 °C (212 °F). No solar loading.
Maximum attenuation value shall be 105% of the nominal attenuation value.
13. Página
| 13
General
LCF12STL(Z)
LCF12STL(Z), Silexstl ® RF Low Density Foam Coaxial Cable 1/2", corrugated
Aluminium, 1/2 in, Black PE or Low Smoke Halogen-free Fire-retardant (Z).
Type HCAAY-L(Z)-50-12
Construction Materials
Inner Conductor Copper-Clad Aluminum Wire
Dielectric Physical Foam Polyethylene
Outer Conductor Corrugated Aluminium Tube
Jacket Black PE or Low Smoke Halogen-free Fire-retardant
Physical Dimensions
Inner Conductor Diameter 4.80 mm
Dielectric Diameter 12.30 mm
Outer Conductor Diameter 13.80 mm
Diameter Over Jacket 15.70 mm
Mechanical Specifications
Minimum Bending Radius
Single Bending 50 mm
Repeated Bending 125 mm
Minimum Number of Bends 15
Tensile Strength 1000 N
Electrical Specifications
Capacitance 76.0 pF/m (23.2 pF/ft)
Impedance 50 ± 1 O
Velocity 88%
RF Peak Voltage 1.60 kV
Peak Power Rating 36 kW
Cut-o" Frequency 8.8 GHz
Shielding E"ectiveness>10MHz >120 dB
Insulation resistance 5000M Ω-Km
VSWR
0.8~1.0 GHz ≤1.10
1.7~2.2 GHz ≤1.10
2.2~2.7 GHz ≤1.13
14. Página
| 14
Environmental Specifications
Storage Temperature -55 ˚C ~ +85 ˚C
Installation Temperature -40 ˚C ~ +60 ˚C
Operation Temperature -55 ˚C ~ +85 ˚C
Perforance - Attenuation
Frequency Attenuation Attenuation Average
MHz dB/100 m dB/100 ft Power Rating (kW)
100,00 2.40 (0.73) 3,58
200,00 3.45 (1.05) 2,50
450,00 5.25 (1.60) 1,64
800,00 7.15 (2.18) 1,21
900,00 7.65 (2.33) 1,14
1000,00 8.10 (2.47) 1,07
1500,00 10.10 (3.08) 0,86
1800,00 11.15 (3.40) 0,78
2000,00 11.85 (3.61) 0,74
2200,00 12.50 (3.81) 0,70
2400,00 13.05 (3.98) 0,68
2500,00 13.40 (4.08) 0,66
3000,00 14.80 (4.51) 0,59
Standard Conditions
For Attenuation: VSWR 1.0, Cable temperature 20 °C (68 °F)
For Average Power: VSWR 1.0, Ambient temperature 40 °C (104 °F)
Inner Conductor temperature 100 °C (212 °F). No solar loading.
Maximum attenuation value shall be 105% of the nominal attenuation value.
15. Página
| 15
General
LCF78STL(Z)
LCF78STL(Z), Silexstl ® RF Low Density Foam Coaxial Cable 7/8", corrugated
Aluminium, 7/8 in, Black PE or Low Smoke Halogen-free Fire-retardant (Z).
Type HCTAY-L (Z)-50-22
Construction Materials
Inner Conductor Smooth Copper Tube
Dielectric Physical Foam Polyethylene
Outer Conductor Corrugated Aluminium Tube
Jacket Black PE or Low Smoke Halogen-free Fire-retardant
Physical Dimensions
Inner Conductor Diameter 9.00 mm
Dielectric Diameter 22.30 mm
Outer Conductor Diameter 24.90 mm
Diameter Over Jacket 27.50 mm
Mechanical Specifications
Minimum Bending Radius
Single Bending 130 mm
Repeated Bending 250 mm
Minimum Number of Bends 15
Tensile Strength 1350 N
Electrical Specifications
Capacitance 75 pF/m(22.9 pF/ft)
Impedance 50 ± 1 Ω
Velocity 88%
RF Peak Voltage 3.00 kV
Peak Power Rating 82 kW
Cut-off Frequency 5.20 GHz
Shielding Effectiveness>10MHz >120 dB
Insulation resistance 5000M Ω-Km
VSWR
0.8~1.0 GHz ≤1.10
1.7~2.2 GHz ≤1.10
2.2~2.7 GHz ≤1.13
16. Página
| 16
Environmental Specifications
Storage Temperature -55 ˚C ~ +85 ˚C
Installation Temperature -40 ˚C ~ +60 ˚C
Operation Temperature -55 ˚C ~ +85 ˚C
Perforance - Attenuation
Frequency Attenuation Attenuation Average
MHz dB/100 m dB/100 ft Power Rating (kW)
100 MHz 1.25 (0.38) 6,50
200 MHz 1.80 (0.55) 4,50
450 MHz 2.77 (0.84) 3,00
800 MHz 3.83 (1.17) 2,20
900 MHz 4.08 (1.24) 2,10
1000 MHz 4.30 (1.31) 2,00
1500 MHz 5.45 (1.66) 1,70
1800 MHz 6.05 (1.84) 1,60
2000 MHz 6.45 (1.97) 1,50
2200 MHz 6.85 (2.09) 1,40
2400 MHz 7.15 (2.18) 1,30
2500 MHz 7.35 (2.24) 1,20
3000 MHz 8.20 (2.50) 1,10
Standard Conditions
For Attenuation: VSWR 1.0, Cable temperature 20 °C (68 °F)
For Average Power: VSWR 1.0, Ambient temperature 40 °C (104 °F)
Inner Conductor temperature 100 °C (212 °F). No solar loading.
Maximum attenuation value shall be 105% of the nominal attenuation value.
17. Página
| 17
General
LCF158STL(Z)
LCF158STL(Z), Silexstl ® RF Coaxial Cable 1-5/8", corrugated Aluminium, 1-5/8 in,
Black PE or Low Smoke Halogen-free Fire-retardant (Z).
Type HHTAY-L (Z)-50-42
Construction Materials
Inner Conductor Helical Copper Tube
Dielectric Physical Foam Polyethylene
Outer Conductor Corrugated Aluminum Tube
Jacket Black PE or Low Smoke Halogen-free Fire-retardant
Physical Dimensions
Inner Conductor Diameter 17.40 mm
Dielectric Diameter 42.80 mm
Outer Conductor Diameter 46.50 mm
Diameter Over Jacket 49.50 mm
Mechanical Specifications
Minimum Bending Radius
Single Bending 200 mm
Repeated Bending 510 mm
Minimum Number of Bends 15
Tensile Strength 3000 N
Electrical Specifications
Capacitance 76.0 pF/m (23.2 pF/ft)
Impedance 50 ± 1 Ω
Velocity 88%
RF Peak Voltage 5.70 kV
Peak Power Rating 290 kW
Cut-off Frequency 2.80 GHz
Shielding Effectiveness>10MHz >120 dB
Insulation resistance 5000M Ω-Km
VSWR
0.8~1.0 GHz ≤1.10
1.7~2.2 GHz ≤1.10
2.2~2.7 GHz ≤1.13
18. Página
| 18
Environmental Specifications
Storage Temperature -55 ˚C ~ +85 ˚C
Installation Temperature -40 ˚C ~ +60 ˚C
Operation Temperature -55 ˚C ~ +85 ˚C
Perforance - Attenuation
Frequency Attenuation Attenuation Average
MHz dB/100 m dB/100 ft Power Rating (kW)
100 MHz 0.76 (0.23) 15,55
200 MHz 1.09 (0.33) 10,27
450 MHz 1.72 (0.52) 6,46
800 MHz 2.40 (0.73) 4,62
900 MHz 2.58 (0.79) 4,30
1000 MHz 2.74 (0.84) 4,05
1500 MHz 3.50 (1.07) 3,17
1800 MHz 3.94 (1.20) 2,83
2000 MHz 4.20 (1.28) 2,65
2200 MHz 4.46 (1.36) 2,49
2400 MHz 4.74 (1.44) 2,34
2500 MHz 4.86 (1.48) 2,28
3000 MHz - -
Standard Conditions
For Attenuation: VSWR 1.0, Cable temperature 20 °C (68 °F)
For Average Power: VSWR 1.0, Ambient temperature 40 °C (104 °F)
Inner Conductor temperature 100 °C (212 °F). No solar loading.
Maximum attenuation value shall be 105% of the nominal attenuation value.
19. Página
| 19
General Specifications
LCF12STD-xxM-DINF-DINF
Low PIM |-160 dBc
Jumper 1/2" Standard type LCFSTD Silexjpx ® Jumper with interface types
7/16 DIN Female straight to 7/16 DIN Female Low PIM, (xx) Length
Jumpers feature specially designed connectors which are soldered-on in a strictly controlled industrial process. The connector
design and manufacturing process has been optimized to produce premium PIM3, VSWR and IM levels.
The low PIM coaxial jumper cable assemblies have an injection molded boot on each connector which provides added strain relief
and weather sealing ensuring long term durability. Available in 1/2" flexible and 1/2" superflexible coaxial cables, Silexjpx low PIM
coax cables can be ordered in standard and custom lengths with 7/16 DIN and Type N connectors to meet your specific
requirements.
Cable assembly
Series connector 1 7/16
Interface 1 jack straight female
Cable, Nominal Size 1/2〃Standard LCF Type
Series connector 2 7/16
Interface 2 jack straight female
Outline Drawing
Construction Materials
Cable Type 1/2" LCF
Jacket PE or (Z) Fire Retardancy Test Method IEC 60332-1 flame retardant | IEC 60332-3C-24 fire retardant
Smoke Index Test Method IEC 61034 low smoke
Toxicity Index Test Method IEC 60754-1 | IEC 60754-2 smoke emission: halogen free, non corrosive
Connector 1 7/16 DIN Female straight
Connector 1 7/16 DIN Female straight
Specifications Connector Inner Conductor Pin Brass/Silver Plating
Inner Conductor Socket Tin Bronze /Silver Plating
Insulator PTFE or TPX
Body & Outer Conductor Brass/Trimetal plating
Gasket Silicon Rubber
Durability >500 cycle
Sealing class IP68
20. Página
| 20
Electrical Specifications
Frequency Range DC to 3 GHz
Impedance Ohms 50 Ω
Maximum VSWR 1.15:1
Velocity Propagation 83%
RFShielding 120 dB
PeakPower 16 KWatts
Passive Intermodulation -160 dBc
VSWR (Return Loss, dB) 1.065 (30) @ 1710 - 1990 MHz
1.065 (30) @ 2000 - 2200 MHz
1.083 (28) @ 2200 - 2700 MHz
Environmental Specifications
Installation Temperature, °C(°F) -25 to 60 (-13 to 140 )
Operation Temperature, °C(°F) -50 to 85 (-58 to 185 )
Storage Temperature, °C(°F) -70 to 85 (-94 to 185 )
Jumper Assembly Sample
Example Order Number: LCF12STD4M DINMA DINM
Cable
Types
Length in
Inches Connector 1 - Connector 2 = LCF12STD 4M DINMA DINM
Type Connector
LCF12STD M DIN Male DINM
HCF12STD M DIN Female DINF
LMR240 M
DIN Male Right
Angle DINMA
LMR300 M N Male NM
LMR400 M N Female NF
RG8 M N Male Right Angle NMA Connector 1:DIN Male Right Angle
RG59 M Connector 1: DIN Male 7/16
RG213 M Length: 4 metres
RG214 M Cable Type: LCF12STD
21. Página
| 21
General Specifications
LCF12HR-xxM-DINMA-DINM
Low PIM |-160 dBc
Jumper 1/2" Standard type LCFSTD Silexjpx ® Jumper with interface types
7/16 DIN Male right angle to 7/16 DIN Male straight Low PIM, (xx) Length
Jumpers feature specially designed connectors which are soldered-on in a strictly controlled industrial process. The connector
design and manufacturing process has been optimized to produce premium PIM3, VSWR and IM levels.
The low PIM coaxial jumper cable assemblies have an injection molded boot on each connector which provides added strain relief
and weather sealing ensuring long term durability. Available in 1/2" flexible and 1/2" superflexible coaxial cables, Silexjpx low PIM
coax cables can be ordered in standard and custom lengths with 7/16 DIN and Type N connectors to meet your specific
requirements.
Cable assembly
Series connector 1 7/16
Interface 1 jack right angle
Cable, Nominal Size 1/2〃Superflex HR Type
Series connector 2 7/16
Interface 2 jack straight
Jumper Assembly Sample
Example Order Number: LCF12STD4M DINMA DINM
Cable
Types
Length in
Inches Connector 1 - Connector 2 = LCF12STD 4M DINMA DINM
Type Connector
LCF12STD M DIN Male DINM
HCF12STD M DIN Female DINF
LMR240 M
DIN Male Right
Angle DINMA
LMR300 M N Male NM
LMR400 M N Female NF
RG8 M N Male Right Angle NMA Connector 1:DIN Male Right Angle
RG59 M Connector 1: DIN Male 7/16
RG213 M Length: 4 metres
RG214 M Cable Type: LCF12STD
22. Página
| 22
Outline Drawing
Construction Materials
Cable Type 1/2" LCF
Jacket PE or (Z) Fire Retardancy Test Method IEC 60332-1 flame retardant | IEC 60332-3C-24 fire retardant
Smoke Index Test Method IEC 61034 low smoke
Toxicity Index Test Method IEC 60754-1 | IEC 60754-2 smoke emission: halogen free, non corrosive
Connector 1 7/16 DIN Male right angle
Connector 1 7/16 DIN Male straigth
Specifications Connector Inner Conductor Pin Brass/Silver Plating
Inner Conductor Socket Tin Bronze /Silver Plating
Insulator PTFE or TPX
Body & Outer Conductor Brass/Trimetal plating
Gasket Silicon Rubber
Durability >500 cycle
Sealing class IP68
Electrical Specifications
Frequency Range DC to 2.7 GHz
Impedance Ohms 50 Ω
Maximum VSWR 1.11:1
Velocity Propagation 83%
RFShielding 120 dB
PeakPower 16 KWatts
Passive Intermodulation -160 dBc
VSWR (Return Loss, dB) 1.065 (30) @ 1710 - 1990 MHz
1.065 (30) @ 2000 - 2200 MHz
1.083 (28) @ 2200 - 2700 MHz
Environmental Specifications
Installation Temperature, °C(°F) -25 to 60 (-13 to 140 )
Operation Temperature, °C(°F) -50 to 85 (-58 to 185 )
Storage Temperature, °C(°F) -70 to 85 (-94 to 185 )
23. Página
| 23
General Specifications
GROUNDING KITS
SLXGKM 3/8", 1/2", 7/8", 1-5/8
This Grounding Kit has been developed for copper and aluminum
cable series. The Grounding Kit body facilitates a proper attachment
to the coaxial cable, ensuring that the performance of the coaxial cable.
The tin plated copper mesh provides a secure, low resistance contact to the cable outer conductor. The installation is
fast and simple.
Electrical Specifications
Item SLXGKM Type
Grounding Wire Length 1 m or Customized
Cable Section Acreage 16/25 mm2
Electric Pressure >500 N
Contact Material Tinned Copper
Wire Braiding
Waterproof Material -
Resistance ≤3 mΩ
Voltage Resistance 80 kA
Power Frequency Withstand
Voltage 35 kV
Insulation Resistance 10 GΩ
Earth Resistance 2 mΩ
Durability >10 years
Suitable Cable 3/8", 1/2", 7/8", 1-5/8
24. Página
| 24
General Specifications
FEEDER CLAMPS
SLXCL Through Type Feeder Clamp
Stainless steel clamps are applicable to fix feeder cables for microwave and
mobile communication; they are made up of excellent anti-acid steel, will
never rust under weather conditions.
Parts Specifications Materials
C-clamp 5mm SUS304
Towl washer 1mm SUS304
Bolt M8*45 SUS304
Nut Ø8 SUS304
Threaded rod M8*80 SUS304
Plastic clamp 1/2", 7/8'', 1-5/8” PP
Nut Ø8 SUS304
Flat washer Ø8 SUS304
Outdoor clamp for 1/2" Tower CLE Feeder Clamp
SXCL121E SXCL122E SXCL123E SXCL124E
30. Página
| 30
Connector 7/16 & N Types
SilexConnector offers a variety of connector types for Sliex Cablex Coaxial. Silexst® connectors are
engineered and manufactured to the highest standards, achieving maximum performance.
Silexst® connectors are available in both the male and female versions of type N and type 7/16 DIN
connectors. Can be installed on coaxial cable quickly, easily and consistently.
Precision Products for Demanding Applications
SilexConnect™ high performance connectors are designed for use with both Silexstd® corrugated copper and
Silexstl® corrugated aluminum cables.
They are designed specifically to provide the highest quality connector-cable interface while simplifying and
speeding up connector attachment.
Advantages of Silexst® Connectors & Adaptors
• Ease of Installation
• Completely Weatherproof and Consistent
• Long Life
• Low Intermodulation and VSWR
• Corrosion Resistant
• Silver-plated bodies and silver-plated electrical
• Low PIM
31. Página
| 31
General
CCF12STD716M
CCF12STD716M SilexConnect ® RF 7/16 Din Male Connector for 1/2” Coaxial
Cable
Type DINM-1/2"L
Nominal size 1/2" in
Interface 7/16 DIN Male
Body Style Straight
Mounting cable Models: copper LCF12STD, aluminum LCF12STL, HCAAY-50-12
Technical Specifications
Characteristics DIN Type
Impedance 50 Ω
Operating Voltage 2700 V
Frequency Range ≤7.5 GHz
Shielding Effectiveness >115 dB
Inner Contact Resistance ≤0.4 MΩ
Outer Contact Resistance ≤0.2 MΩ
Intermodulation ≤-155 dBc
Insulation Resistance >10000 MΩ
Dielectric Withstanding Voltage 3000 V
Insertion Loss ≤0.08 dB
VSWR
0.8 ~ 1.0GHz ≤1.08
1.7 ~ 2.5GHz ≤1.10
Inner Conductor Pin Brass/Silver Plating
Inner Conductor Socket Tin Bronze/Silver Plating
Insulator PTFE or TPX
Body & Outer Conductor Brass/Trimetal Plating
Gasket Silicon Rubber
Durability >500 cycle
Environmental Specifications
Temperature Range -65 ºC ~ +165ºC
Immersion Test Method IEC 60529:2001, IP65
Moisture Resistance Test Method IEC 60068-2-3
Mechanical Shock Test Method IEC 60068-2-27
Thermal Shock Test Method IEC 60068-2-14
Vibration Test Method IEC 60068-2-6
Corrosion Test Method IEC 60068-2-11
Standard Conditions
Attenuation, Ambient Temperature 20 °C | 68 °F
Average Power, Ambient Temperature 40 °C | 104 °F
32. Página
| 32
General
CCF12STD716F
CCF12STD716F SilexConnect ® RF 7/16 Din Female Connector for 1/2” Coaxial Cable
Type DINF-1/2"L
Nominal size 1/2" in
Interface 7/16 DIN Female
Body Style Straight
Mounting cable Models: copper LCF12STD, aluminum LCF12STL, HCAAY-50-12
Technical Specifications
Characteristics DIN Type
Impedance 50 Ω
Operating Voltage 2700 V
Frequency Range ≤7.5 GHz
Shielding Effectiveness >115 dB
Inner Contact Resistance ≤0.4 MΩ
Outer Contact Resistance ≤0.2 MΩ
Intermodulation ≤-155 dBc
Insulation Resistance >10000 MΩ
Dielectric Withstanding Voltage 3000 V
Insertion Loss =0.08 dB
VSWR
0.8 ~ 1.0GHz ≤1.08
1.7 ~ 2.5GHz ≤1.10
Inner Conductor Pin Brass/Silver Plating Brass/Silver Plating
Inner Conductor Socket Tin Bronze /Silver Plating Tin Bronze/Silver Plating
Insulator PTFE or TPX PTFE or TPX
Body & Outer Conductor Brass/Trimetal plating Brass/Trimetal Plating
Gasket Silicon Rubber Silicon Rubber
Durability >500 cycle >500 cycle
Environmental Specifications
Temperature Range -65 ºC ~ +165ºC
Immersion Depth -
Immersion Test Method IEC 60529:2001, IP65
Moisture Resistance Test Method IEC 60068-2-3
Mechanical Shock Test Method IEC 60068-2-27
Thermal Shock Test Method IEC 60068-2-14
Vibration Test Method IEC 60068-2-6
Corrosion Test Method IEC 60068-2-11
Standard Conditions
Attenuation, Ambient Temperature 20 °C | 68 °F
Average Power, Ambient Temperature 40 °C | 104 °F
33. Página
| 33
General
CCF12STD716MA
CCF12STD716MA SilexConnect ® RF 7/16 Din Male Connector for 1/2” Coaxial
Cable
Type DINMA-1/2”L
Nominal size 1/2" in
Interface 7/16 DIN Male
Body Style Right angle
Mounting cable Models: copper LCF12STD, aluminum LCF12STL, HCAAY-50-12
Technical Specifications
Characteristics DIN Type
Impedance 50 Ω
Operating Voltage 2700 V
Frequency Range ≤7.5 GHz
Shielding Effectiveness >115 dB
Inner Contact Resistance ≤0.4 MΩ
Outer Contact Resistance ≤0.2 MΩ
Intermodulation ≤-155 dBc
Insulation Resistance >10000 MΩ
Dielectric Withstanding Voltage 3000 V
Insertion Loss =0.08 dB
VSWR
0.8 ~ 1.0GHz ≤1.08
1.7 ~ 2.5GHz ≤1.10
Inner Conductor Pin Brass/Silver Plating Brass/Silver Plating
Inner Conductor Socket Tin Bronze /Silver Plating Tin Bronze/Silver Plating
Insulator PTFE or TPX PTFE or TPX
Body & Outer Conductor Brass/Trimetal plating Brass/Trimetal Plating
Gasket Silicon Rubber Silicon Rubber
Durability >500 cycle >500 cycle
Environmental Specifications
Temperature Range -65 ºC ~ +165ºC
Immersion Depth -
Immersion Test Method IEC 60529:2001, IP65
Moisture Resistance Test Method IEC 60068-2-3
Mechanical Shock Test Method IEC 60068-2-27
Thermal Shock Test Method IEC 60068-2-14
Vibration Test Method IEC 60068-2-6
Corrosion Test Method IEC 60068-2-11
Standard Conditions
Attenuation, Ambient Temperature 20 °C | 68 °F
Average Power, Ambient Temperature 40 °C | 104 °F
34. Página
| 34
General
CCF12STDNM
CCF12STDNM SilexConnect ® RF N Male Connector for 1/2” Coaxial Cable
Type DINNM-1/2”L
Nominal size 1/2" in
Interface N Male
Body Style Straight
Mounting cable Models: copper LCF12STD, aluminum LCF12STL, HCAAY-50-12
Technical Specifications
Characteristics N Type
Impedance 50 Ω
Operating Voltage 1500 V
Frequency Range ≤18.0 GHz
Shielding Effectiveness >115 Db
Inner Contact Resistance ≤0.8 MΩ
Outer Contact Resistance ≤0.25 MΩ
Intermodulation ≤-155 dBc
Insulation Resistance >5000 MΩ
Dielectric Withstanding Voltage 2500 V
Insertion Loss =0.1 dB
VSWR
0.8 ~ 1.0GHz ≤1.08
1.7 ~ 2.5GHz ≤1.10
Inner Conductor Pin Brass/Silver Plating Brass/Silver Plating
Inner Conductor Socket Tin Bronze /Silver Plating Tin Bronze/Silver Plating
Insulator PTFE or TPX PTFE or TPX
Body & Outer Conductor Brass/Trimetal plating Brass/Trimetal Plating
Gasket Silicon Rubber Silicon Rubber
Durability >500 cycle >500 cycle
Environmental Specifications
Temperature Range -65 ºC ~ +165ºC
Immersion Depth -
Immersion Test Method IEC 60529:2001, IP65
Moisture Resistance Test Method IEC 60068-2-3
Mechanical Shock Test Method IEC 60068-2-27
Thermal Shock Test Method IEC 60068-2-14
Vibration Test Method IEC 60068-2-6
Corrosion Test Method IEC 60068-2-11
Standard Conditions
Attenuation, Ambient Temperature 20 °C | 68 °F
Average Power, Ambient Temperature 40 °C | 104 °F
Outline Drawing
35. Página
| 35
General
CCF12STDNF
CCF12STDNF SilexConnect ® RF N Female Connector for 1/2” Coaxial Cable
Type DINNF-1/2” L
Nominal size 1/2" in
Interface N Female
Body Style Straight
Mounting cable Models: copper LCF12STD, aluminum LCF12STL, HCAAY-50-12
Technical Specifications
Characteristics N Type
Impedance 50 Ω
Operating Voltage 1500 V
Frequency Range ≤18.0 GHz
Shielding Effectiveness >115 Db
Inner Contact Resistance ≤0.8 MΩ
Outer Contact Resistance ≤0.25 MΩ
Intermodulation ≤-155 dBc
Insulation Resistance >5000 MΩ
Dielectric Withstanding Voltage 2500 V
Insertion Loss =0.1 dB
VSWR
0.8 ~ 1.0GHz ≤1.08
1.7 ~ 2.5GHz ≤1.10
Inner Conductor Pin Brass/Silver Plating Brass/Silver Plating
Inner Conductor Socket Tin Bronze /Silver Plating Tin Bronze/Silver Plating
Insulator PTFE or TPX PTFE or TPX
Body & Outer Conductor Brass/Trimetal plating Brass/Trimetal Plating
Gasket Silicon Rubber Silicon Rubber
Durability >500 cycle >500 cycle
Environmental Specifications
Temperature Range -65 ºC ~ +165ºC
Immersion Depth -
Immersion Test Method IEC 60529:2001, IP65
Moisture Resistance Test Method IEC 60068-2-3
Mechanical Shock Test Method IEC 60068-2-27
Thermal Shock Test Method IEC 60068-2-14
Vibration Test Method IEC 60068-2-6
Corrosion Test Method IEC 60068-2-11
Standard Conditions
Attenuation, Ambient Temperature 20 °C | 68 °F
Average Power, Ambient Temperature 40 °C | 104 °F
36. Página
| 36
General
CCF12STDNMA
CCF12STD716NMA SilexConnect ® RF N Male Connector for 1/2” Coaxial
Cable
Type DINNMA-1/2”L
Nominal size 1/2" in
Interface N Male
Body Style Right angle
Mounting cable Models: copper LCF12STD, aluminum LCF12STL, HCAAY-50-12
Technical Specifications
Characteristics N Type
Impedance 50 Ω
Operating Voltage 1500 V
Frequency Range ≤18.0 GHz
Shielding Effectiveness >115 Db
Inner Contact Resistance ≤0.8 MΩ
Outer Contact Resistance ≤0.25 MΩ
Intermodulation ≤-155 dBc
Insulation Resistance >5000 MΩ
Dielectric Withstanding Voltage 2500 V
Insertion Loss =0.1 dB
VSWR
0.8 ~ 1.0GHz ≤1.08
1.7 ~ 2.5GHz ≤1.10
Inner Conductor Pin Brass/Silver Plating
Inner Conductor Socket Tin Bronze /Silver Plating
Insulator PTFE or TPX
Body & Outer Conductor Brass/Trimetal plating
Gasket Silicon Rubber
Durability >500 cycle
Environmental Specifications
Temperature Range -65 ºC ~ +165ºC
Immersion Depth -
Immersion Test Method IEC 60529:2001, IP65
Moisture Resistance Test Method IEC 60068-2-3
Mechanical Shock Test Method IEC 60068-2-27
Thermal Shock Test Method IEC 60068-2-14
Vibration Test Method IEC 60068-2-6
Corrosion Test Method IEC 60068-2-11
Standard Conditions
Attenuation, Ambient Temperature 20 °C | 68 °F
Average Power, Ambient Temperature 40 °C | 104 °F
37. Página
| 37
General
CCF12HR716M
CCF12HR716M SilexConnect ® RF 7/16 Din Male Connector for 1/2” Coaxial
Superflex Cable
Type DINM-1/2"H
Nominal size 1/2" in
Interface 7/16 DIN Male
Body Style Straight
Mounting cable Model LCF12HR, HCAAY-50-09
Technical Specifications
Characteristics DIN Type
Impedance 50 Ω
Operating Voltage 2700 V
Frequency Range ≤7.5 GHz
Shielding Effectiveness >115 dB
Inner Contact Resistance ≤0.4 MΩ
Outer Contact Resistance ≤0.2 MΩ
Intermodulation ≤-155 dBc
Insulation Resistance >10000 MΩ
Dielectric Withstanding Voltage 3000 V
Insertion Loss =0.08 dB
VSWR
0.8 ~ 1.0GHz ≤1.08
1.7 ~ 2.5GHz ≤1.10
Inner Conductor Pin Brass/Silver Plating Brass/Silver Plating
Inner Conductor Socket Tin Bronze /Silver Plating Tin Bronze/Silver Plating
Insulator PTFE or TPX PTFE or TPX
Body & Outer Conductor Brass/Trimetal plating Brass/Trimetal Plating
Gasket Silicon Rubber Silicon Rubber
Durability >500 cycle >500 cycle
Environmental Specifications
Temperature Range -65 ºC ~ +165ºC
Immersion Depth -
Immersion Test Method IEC 60529:2001, IP65
Moisture Resistance Test Method IEC 60068-2-3
Mechanical Shock Test Method IEC 60068-2-27
Thermal Shock Test Method IEC 60068-2-14
Vibration Test Method IEC 60068-2-6
Corrosion Test Method IEC 60068-2-11
Standard Conditions
Attenuation, Ambient Temperature 20 °C | 68 °F
Average Power, Ambient Temperature 40 °C | 104 °F
38. Página
| 38
General
CCF12HR716F
CCF12HR716F SilexConnect ® RF 7/16 Din Female Connector for 1/2” Coaxial
Superflex Cable
Type DINF-1/2"H
Nominal size 1/2" in
Interface 7/16 DIN Female
Body Style Straight
Mounting cable Model LCF12HR, HCAAY-50-09
Technical Specifications
Characteristics DIN Type
Impedance 50 Ω
Operating Voltage 2700 V
Frequency Range ≤7.5 GHz
Shielding Effectiveness >115 dB
Inner Contact Resistance ≤0.4 MΩ
Outer Contact Resistance ≤0.2 MΩ
Intermodulation ≤-155 dBc
Insulation Resistance >10000 MΩ
Dielectric Withstanding Voltage 3000 V
Insertion Loss =0.08 dB
VSWR
0.8 ~ 1.0GHz ≤1.08
1.7 ~ 2.5GHz ≤1.10
Inner Conductor Pin Brass/Silver Plating Brass/Silver Plating
Inner Conductor Socket Tin Bronze /Silver Plating Tin Bronze/Silver Plating
Insulator PTFE or TPX PTFE or TPX
Body & Outer Conductor Brass/Trimetal plating Brass/Trimetal Plating
Gasket Silicon Rubber Silicon Rubber
Durability >500 cycle >500 cycle
Environmental Specifications
Temperature Range -65 ºC ~ +165ºC
Immersion Depth -
Immersion Test Method IEC 60529:2001, IP65
Moisture Resistance Test Method IEC 60068-2-3
Mechanical Shock Test Method IEC 60068-2-27
Thermal Shock Test Method IEC 60068-2-14
Vibration Test Method IEC 60068-2-6
Corrosion Test Method IEC 60068-2-11
Standard Conditions
Attenuation, Ambient Temperature 20 °C | 68 °F
Average Power, Ambient Temperature 40 °C | 104 °F
39. Página
| 39
General
CCF12HR716MA
CCF12HR716MA SilexConnect ® RF 7/16 Din Male Connector for 1/2” Coaxial
Superflex Cable
Type DINMA-1/2”H
Nominal size 1/2" in
Interface 7/16 DIN Male
Body Style Right angle
Mounting cable Model LCF12HR, HCAAY-50-09
Technical Specifications
Characteristics DIN Type
Impedance 50 Ω
Operating Voltage 2700 V
Frequency Range ≤7.5 GHz
Shielding Effectiveness >115 dB
Inner Contact Resistance ≤0.4 MΩ
Outer Contact Resistance ≤0.2 MΩ
Intermodulation ≤-155 dBc
Insulation Resistance >10000 MΩ
Dielectric Withstanding Voltage 3000 V
Insertion Loss =0.08 dB
VSWR
0.8 ~ 1.0GHz ≤1.08
1.7 ~ 2.5GHz ≤1.10
Inner Conductor Pin Brass/Silver Plating Brass/Silver Plating
Inner Conductor Socket Tin Bronze /Silver Plating Tin Bronze/Silver Plating
Insulator PTFE or TPX PTFE or TPX
Body & Outer Conductor Brass/Trimetal plating Brass/Trimetal Plating
Gasket Silicon Rubber Silicon Rubber
Durability >500 cycle >500 cycle
Environmental Specifications
Temperature Range -65 ºC ~ +165ºC
Immersion Depth -
Immersion Test Method IEC 60529:2001, IP65
Moisture Resistance Test Method IEC 60068-2-3
Mechanical Shock Test Method IEC 60068-2-27
Thermal Shock Test Method IEC 60068-2-14
Vibration Test Method IEC 60068-2-6
Corrosion Test Method IEC 60068-2-11
Standard Conditions
Attenuation, Ambient Temperature 20 °C | 68 °F
Average Power, Ambient Temperature 40 °C | 104 °F
40. Página
| 40
General
CCF12HRNM
CCF12HRNM SilexConnect ® RF N Male Connector for 1/2” Coaxial Superflex
Cable
Type DINNM-1/2”H
Nominal size 1/2" in
Interface N Male
Body Style Straight
Mounting cable Model LCF12HR, HCAAY-50-09
Technical Specifications
Characteristics N Type
Impedance 50 Ω
Operating Voltage 1500 V
Frequency Range ≤18.0 GHz
Shielding Effectiveness >115 Db
Inner Contact Resistance ≤0.8 MΩ
Outer Contact Resistance ≤0.25 MΩ
Intermodulation ≤-155 dBc
Insulation Resistance >5000 MΩ
Dielectric Withstanding Voltage 2500 V
Insertion Loss =0.1 dB
VSWR
0.8 ~ 1.0GHz ≤1.08
1.7 ~ 2.5GHz ≤1.10
Inner Conductor Pin Brass/Silver Plating
Inner Conductor Socket Tin Bronze /Silver Plating
Insulator PTFE or TPX
Body & Outer Conductor Brass/Trimetal plating
Gasket Silicon Rubber
Durability >500 cycle
Environmental Specifications
Temperature Range -65 ºC ~ +165ºC
Immersion Depth -
Immersion Test Method IEC 60529:2001, IP65
Moisture Resistance Test Method IEC 60068-2-3
Mechanical Shock Test Method IEC 60068-2-27
Thermal Shock Test Method IEC 60068-2-14
Vibration Test Method IEC 60068-2-6
Corrosion Test Method IEC 60068-2-11
Standard Conditions
Attenuation, Ambient Temperature 20 °C | 68 °F
Average Power, Ambient Temperature 40 °C | 104 °F
41. Página
| 41
General
CCF12HRNF
CCF12HRNF SilexConnect ® RF N Female Connector for 1/2” Coaxial Superflex
Cable
Type DINNF-1/2” H
Nominal size 1/2" in
Interface N Female
Body Style Straight
Mounting cable Model LCF12HR, HCAAY-50-09
Technical Specifications
Characteristics N Type
Impedance 50 Ω
Operating Voltage 1500 V
Frequency Range ≤18.0 GHz
Shielding Effectiveness >115 Db
Inner Contact Resistance ≤0.8 MΩ
Outer Contact Resistance ≤0.25 MΩ
Intermodulation ≤-155 dBc
Insulation Resistance >5000 MΩ
Dielectric Withstanding Voltage 2500 V
Insertion Loss =0.1 dB
VSWR
0.8 ~ 1.0GHz ≤1.08
1.7 ~ 2.5GHz ≤1.10
Inner Conductor Pin Brass/Silver Plating
Inner Conductor Socket Tin Bronze /Silver Plating
Insulator PTFE or TPX
Body & Outer Conductor Brass/Trimetal plating
Gasket Silicon Rubber
Durability >500 cycle
Environmental Specifications
Temperature Range -65 ºC ~ +165ºC
Immersion Depth -
Immersion Test Method IEC 60529:2001, IP65
Moisture Resistance Test Method IEC 60068-2-3
Mechanical Shock Test Method IEC 60068-2-27
Thermal Shock Test Method IEC 60068-2-14
Vibration Test Method IEC 60068-2-6
Corrosion Test Method IEC 60068-2-11
Standard Conditions
Attenuation, Ambient Temperature 20 °C | 68 °F
Average Power, Ambient Temperature 40 °C | 104 °F
42. Página
| 42
General
CCF12HRNMA
CCF12HRNMA SilexConnect ® RF N Male Connector for 1/2” Coaxial Superflex
Cable
Type DINNMA-1/2”H
Nominal size 1/2" in
Interface N Male
Body Style Right angle
Mounting cable Model LCF12HR, HCAAY-50-09
Technical Specifications
Characteristics N Type
Impedance 50 Ω
Operating Voltage 1500 V
Frequency Range ≤18.0 GHz
Shielding Effectiveness >115 Db
Inner Contact Resistance ≤0.8 MΩ
Outer Contact Resistance ≤0.25 MΩ
Intermodulation ≤-155 dBc
Insulation Resistance >5000 MΩ
Dielectric Withstanding Voltage 2500 V
Insertion Loss =0.1 dB
VSWR
0.8 ~ 1.0GHz ≤1.08
1.7 ~ 2.5GHz ≤1.10
Inner Conductor Pin Brass/Silver Plating
Inner Conductor Socket Tin Bronze /Silver Plating
Insulator PTFE or TPX
Body & Outer Conductor Brass/Trimetal plating
Gasket Silicon Rubber
Durability >500 cycle
Environmental Specifications
Temperature Range -65 ºC ~ +165ºC
Immersion Depth -
Immersion Test Method IEC 60529:2001, IP65
Moisture Resistance Test Method IEC 60068-2-3
Mechanical Shock Test Method IEC 60068-2-27
Thermal Shock Test Method IEC 60068-2-14
Vibration Test Method IEC 60068-2-6
Corrosion Test Method IEC 60068-2-11
Standard Conditions
Attenuation, Ambient Temperature 20 °C | 68 °F
Average Power, Ambient Temperature 40 °C | 104 °F
43. Página
| 43
General
CCF78STD716M
CCF78STD716M SilexConnect ® RF 7/16 Din Male Connector for 7/8” Coaxial
Cable
Type DINM-7/8”L
Nominal size 7/8" in
Interface 7/16 DIN Male
Body Style Straight
Mounting cable Models: copper LCF78STD, aluminum LCF78STL, HCTAY-50-22
Technical Specifications
Characteristics DIN Type
Impedance 50 Ω
Operating Voltage 2700 V
Frequency Range ≤7.5 GHz
Shielding Effectiveness >115 dB
Inner Contact Resistance ≤0.4 MΩ
Outer Contact Resistance ≤0.2 MΩ
Intermodulation ≤-155 dBc
Insulation Resistance >10000 MΩ
Dielectric Withstanding Voltage 3000 V
Insertion Loss =0.08 dB
VSWR
0.8 ~ 1.0GHz ≤1.08
1.7 ~ 2.5GHz ≤1.10
Inner Conductor Pin Brass/Silver Plating
Inner Conductor Socket Tin Bronze/Silver Plating
Insulator PTFE or TPX
Body & Outer Conductor Brass/Trimetal Plating
Gasket Silicon Rubber
Durability >500 cycle
Environmental Specifications
Temperature Range -65 ºC ~ +165ºC
Immersion Depth -
Immersion Test Method IEC 60529:2001, IP65
Moisture Resistance Test Method IEC 60068-2-3
Mechanical Shock Test Method IEC 60068-2-27
Thermal Shock Test Method IEC 60068-2-14
Vibration Test Method IEC 60068-2-6
Corrosion Test Method IEC 60068-2-11
Standard Conditions
Attenuation, Ambient Temperature 20 °C | 68 °F
Average Power, Ambient Temperature 40 °C | 104 °F
44. Página
| 44
General
CCF78STD716F
CCF78STD716F SilexConnect ® RF 7/16 Din Female Connector for 7/8” Coaxial Cable
Type DINF-7/8"L
Nominal size 7/8" in
Interface 7/16 DIN Female
Body Style Straight
Mounting cable Models: copper LCF78STD, aluminum LCF78STL, HCTAY-50-22
Technical Specifications
Characteristics DIN Type
Impedance 50 Ω
Operating Voltage 2700 V
Frequency Range ≤7.5 GHz
Shielding Effectiveness >115 dB
Inner Contact Resistance ≤0.4 MΩ
Outer Contact Resistance ≤0.2 MΩ
Intermodulation ≤-155 dBc
Insulation Resistance >10000 MΩ
Dielectric Withstanding Voltage 3000 V
Insertion Loss =0.08 dB
VSWR
0.8 ~ 1.0GHz ≤1.08
1.7 ~ 2.5GHz ≤1.10
Inner Conductor Pin Brass/Silver Plating
Inner Conductor Socket Tin Bronze/Silver Plating
Insulator PTFE or TPX
Body & Outer Conductor Brass/Trimetal Plating
Gasket Silicon Rubber
Durability >500 cycle
Environmental Specifications
Temperature Range -65 ºC ~ +165ºC
Immersion Depth -
Immersion Test Method IEC 60529:2001, IP65
Moisture Resistance Test Method IEC 60068-2-3
Mechanical Shock Test Method IEC 60068-2-27
Thermal Shock Test Method IEC 60068-2-14
Vibration Test Method IEC 60068-2-6
Corrosion Test Method IEC 60068-2-11
Standard Conditions
Attenuation, Ambient Temperature 20 °C | 68 °F
Average Power, Ambient Temperature 40 °C | 104 °F
45. Página
| 45
General
CCF78STD716MA
CCF78STD716MA SilexConnect ® RF7/16 Din Male Connector for 7/8” Coaxial
Cable
Type DINMA-7/8”L
Nominal size 7/8" in
Interface 7/16 DIN Male
Body Style Right angle
Mounting cable Models: copper LCF78STD, aluminum LCF78STL, HCTAY-50-22
Technical Specifications
Characteristics DIN Type
Impedance 50 Ω
Operating Voltage 2700 V
Frequency Range ≤7.5 GHz
Shielding Effectiveness >115 dB
Inner Contact Resistance ≤0.4 MΩ
Outer Contact Resistance ≤0.2 MΩ
Intermodulation ≤-155 dBc
Insulation Resistance >10000 MΩ
Dielectric Withstanding Voltage 3000 V
Insertion Loss =0.08 dB
VSWR
0.8 ~ 1.0GHz ≤1.08
1.7 ~ 2.5GHz ≤1.10
Inner Conductor Pin Brass/Silver Plating
Inner Conductor Socket Tin Bronze/Silver Plating
Insulator PTFE or TPX
Body & Outer Conductor Brass/Trimetal Plating
Gasket Silicon Rubber
Durability >500 cycle
Environmental Specifications
Temperature Range -65 ºC ~ +165ºC
Immersion Depth -
Immersion Test Method IEC 60529:2001, IP65
Moisture Resistance Test Method IEC 60068-2-3
Mechanical Shock Test Method IEC 60068-2-27
Thermal Shock Test Method IEC 60068-2-14
Vibration Test Method IEC 60068-2-6
Corrosion Test Method IEC 60068-2-11
Standard Conditions
Attenuation, Ambient Temperature 20 °C | 68 °F
Average Power, Ambient Temperature 40 °C | 104 °F
46. Página
| 46
General
CCF78STDNM
CCF78STDNM SilexConnect ® RF N Male Connector for 7/8” Coaxial Cable
Type DINNM-7/8”L
Nominal size 7/8" in
Interface N Male
Body Style Straight
Mounting cable Models: copper LCF78STD, aluminum LCF78STL, HCTAY-50-22
Technical Specifications
Characteristics N Type
Impedance 50 Ω
Operating Voltage 1500 V
Frequency Range ≤18.0 GHz
Shielding Effectiveness >115 Db
Inner Contact Resistance ≤0.8 MΩ
Outer Contact Resistance ≤0.25 MΩ
Intermodulation ≤-155 dBc
Insulation Resistance >5000 MΩ
Dielectric Withstanding Voltage 2500 V
Insertion Loss =0.1 dB
VSWR
0.8 ~ 1.0GHz ≤1.08
1.7 ~ 2.5GHz ≤1.10
Inner Conductor Pin Brass/Silver Plating
Inner Conductor Socket Tin Bronze /Silver Plating
Insulator PTFE or TPX
Body & Outer Conductor Brass/Trimetal plating
Gasket Silicon Rubber
Durability >500 cycle
Environmental Specifications
Temperature Range -65 ºC ~ +165ºC
Immersion Depth -
Immersion Test Method IEC 60529:2001, IP65
Moisture Resistance Test Method IEC 60068-2-3
Mechanical Shock Test Method IEC 60068-2-27
Thermal Shock Test Method IEC 60068-2-14
Vibration Test Method IEC 60068-2-6
Corrosion Test Method IEC 60068-2-11
Standard Conditions
Attenuation, Ambient Temperature 20 °C | 68 °F
Average Power, Ambient Temperature 40 °C | 104 °F
47. Página
| 47
General
CCF78STDNF
CCF78STDNF SilexConnect ® RF N Female Connector for 7/8” Coaxial Cable
Type DINNF-7/8”L
Nominal size 7/8" in
Interface N Female
Body Style Straight
Mounting cable Models: copper LCF78STD, aluminum LCF78STL, HCTAY-50-22
Technical Specifications
Characteristics N Type
Impedance 50 Ω
Operating Voltage 1500 V
Frequency Range ≤18.0 GHz
Shielding Effectiveness >115 Db
Inner Contact Resistance ≤0.8 MΩ
Outer Contact Resistance ≤0.25 MΩ
Intermodulation ≤-155 dBc
Insulation Resistance >5000 MΩ
Dielectric Withstanding Voltage 2500 V
Insertion Loss =0.1 dB
VSWR
0.8 ~ 1.0GHz ≤1.08
1.7 ~ 2.5GHz ≤1.10
Inner Conductor Pin Brass/Silver Plating
Inner Conductor Socket Tin Bronze /Silver Plating
Insulator PTFE or TPX
Body & Outer Conductor Brass/Trimetal plating
Gasket Silicon Rubber
Durability >500 cycle
Environmental Specifications
Temperature Range -65 ºC ~ +165ºC
Immersion Depth -
Immersion Test Method IEC 60529:2001, IP65
Moisture Resistance Test Method IEC 60068-2-3
Mechanical Shock Test Method IEC 60068-2-27
Thermal Shock Test Method IEC 60068-2-14
Vibration Test Method IEC 60068-2-6
Corrosion Test Method IEC 60068-2-11
Standard Conditions
Attenuation, Ambient Temperature 20 °C | 68 °F
Average Power, Ambient Temperature 40 °C | 104 °F
48. Página
| 48
General
CCF158STD716M
CCF158STD716M SilexConnect ® RF 7/16 Din Male Connector for 1-5/8”
Coaxial Cable
Type DINM-1-5/8”L
Nominal size 1-5/8" in
Interface 7/16 DIN Male
Body Style Straight
Mounting cable Models: copper LCF158STD, aluminum LCF158STL, HCTAY-50-42
Technical Specifications
Characteristics DIN Type
Impedance 50 Ω
Operating Voltage 2700 V
Frequency Range ≤7.5 GHz
Shielding Effectiveness >115 dB
Inner Contact Resistance ≤0.4 MΩ
Outer Contact Resistance ≤0.2 MΩ
Intermodulation ≤-155 dBc
Insulation Resistance >10000 MΩ
Dielectric Withstanding Voltage 3000 V
Insertion Loss =0.08 dB
VSWR
0.8 ~ 1.0GHz ≤1.08
1.7 ~ 2.5GHz ≤1.10
Inner Conductor Pin Brass/Silver Plating
Inner Conductor Socket Tin Bronze/Silver Plating
Insulator PTFE or TPX
Body & Outer Conductor Brass/Trimetal Plating
Gasket Silicon Rubber
Durability >500 cycle
Environmental Specifications
Temperature Range -65 ºC ~ +165ºC
Immersion Depth -
Immersion Test Method IEC 60529:2001, IP65
Moisture Resistance Test Method IEC 60068-2-3
Mechanical Shock Test Method IEC 60068-2-27
Thermal Shock Test Method IEC 60068-2-14
Vibration Test Method IEC 60068-2-6
Corrosion Test Method IEC 60068-2-11
Standard Conditions
Attenuation, Ambient Temperature 20 °C | 68 °F
Average Power, Ambient Temperature 40 °C | 104 °F
49. Página
| 49
General
CCF158STD716F
CCF158STD716F SilexConnect ® RF 7/16 Din Female Connector for 1-5/8”
Coaxial Cable
Type DINF-1-5/8"L
Nominal size 1-5/8" in
Interface 7/16 DIN Female
Body Style Straight
Mounting cable Models: copper LCF158STD, aluminum LCF158STL, HCTAY-50-42
Technical Specifications
Characteristics DIN Type
Impedance 50 Ω
Operating Voltage 2700 V
Frequency Range ≤7.5 GHz
Shielding Effectiveness >115 dB
Inner Contact Resistance ≤0.4 MΩ
Outer Contact Resistance ≤0.2 MΩ
Intermodulation ≤-155 dBc
Insulation Resistance >10000 MΩ
Dielectric Withstanding Voltage 3000 V
Insertion Loss =0.08 dB
VSWR
0.8 ~ 1.0GHz ≤1.08
1.7 ~ 2.5GHz ≤1.10
Inner Conductor Pin Brass/Silver Plating
Inner Conductor Socket Tin Bronze/Silver Plating
Insulator PTFE or TPX
Body & Outer Conductor Brass/Trimetal Plating
Gasket Silicon Rubber
Durability >500 cycle
Environmental Specifications
Temperature Range -65 ºC ~ +165ºC
Immersion Depth -
Immersion Test Method IEC 60529:2001, IP65
Moisture Resistance Test Method IEC 60068-2-3
Mechanical Shock Test Method IEC 60068-2-27
Thermal Shock Test Method IEC 60068-2-14
Vibration Test Method IEC 60068-2-6
Corrosion Test Method IEC 60068-2-11
Standard Conditions
Attenuation, Ambient Temperature 20 °C | 68 °F
Average Power, Ambient Temperature 40 °C | 104 °F
50. Página
| 50
General
CCF158STDNM
CCF158STDNM SilexConnect ® RF N Male Connector for 1-5/8” Coaxial Cable
Type DINNM-1-5/8”L
Nominal size 1-5/8" in
Interface N Male
Body Style Straight
Mounting cable Models: copper LCF158STD, aluminum LCF158STL, HCTAY-50-42
Technical Specifications
Characteristics N Type
Impedance 50 Ω
Operating Voltage 1500 V
Frequency Range ≤18.0 GHz
Shielding Effectiveness >115 Db
Inner Contact Resistance ≤0.8 MΩ
Outer Contact Resistance ≤0.25 MΩ
Intermodulation ≤-155 dBc
Insulation Resistance >5000 MΩ
Dielectric Withstanding Voltage 2500 V
Insertion Loss =0.1 dB
VSWR
0.8 ~ 1.0GHz ≤1.08
1.7 ~ 2.5GHz ≤1.10
Inner Conductor Pin Brass/Silver Plating
Inner Conductor Socket Tin Bronze /Silver Plating
Insulator PTFE or TPX
Body & Outer Conductor Brass/Trimetal plating
Gasket Silicon Rubber
Durability >500 cycle
Environmental Specifications
Temperature Range -65 ºC ~ +165ºC
Immersion Depth -
Immersion Test Method IEC 60529:2001, IP65
Moisture Resistance Test Method IEC 60068-2-3
Mechanical Shock Test Method IEC 60068-2-27
Thermal Shock Test Method IEC 60068-2-14
Vibration Test Method IEC 60068-2-6
Corrosion Test Method IEC 60068-2-11
Standard Conditions
Attenuation, Ambient Temperature 20 °C | 68 °F
Average Power, Ambient Temperature 40 °C | 104 °F
51. Página
| 51
General
CCF58STDNF
CCF158STDNF SilexConnect ® RF N Female Connector for 1-5/8” Coaxial Cable
Type DINNF-1-5/8”L
Nominal size 1-5/8" in
Interface N Female
Body Style Straight
Mounting cable Models: copper LCF158STD, aluminum LCF158STL, HCTAY-50-42
Technical Specifications
Characteristics N Type
Impedance 50 Ω
Operating Voltage 1500 V
Frequency Range ≤18.0 GHz
Shielding Effectiveness >115 Db
Inner Contact Resistance ≤0.8 MΩ
Outer Contact Resistance ≤0.25 MΩ
Intermodulation ≤-155 dBc
Insulation Resistance >5000 MΩ
Dielectric Withstanding Voltage 2500 V
Insertion Loss =0.1 dB
VSWR
0.8 ~ 1.0GHz ≤1.08
1.7 ~ 2.5GHz ≤1.10
Inner Conductor Pin Brass/Silver Plating
Inner Conductor Socket Tin Bronze /Silver Plating
Insulator PTFE or TPX
Body & Outer Conductor Brass/Trimetal plating
Gasket Silicon Rubber
Durability >500 cycle
Environmental Specifications
Temperature Range -65 ºC ~ +165ºC
Immersion Depth -
Immersion Test Method IEC 60529:2001, IP65
Moisture Resistance Test Method IEC 60068-2-3
Mechanical Shock Test Method IEC 60068-2-27
Thermal Shock Test Method IEC 60068-2-14
Vibration Test Method IEC 60068-2-6
Corrosion Test Method IEC 60068-2-11
Standard Conditions
Attenuation, Ambient Temperature 20 °C | 68 °F
Average Power, Ambient Temperature 40 °C | 104 °F
52. Página
| 52
General
GLQ14DINKK627T
Arrestors DINM–DINF 2700 Connector 7/16
Arrestors DINF–DINF 2700 Connector 7/16
Type DIN716
Surge arrestors are designed to protect wireless base stations, switching centers and
transmission lines from the damaging effects of extreme high voltage surges caused by lightning strikes.
We our lightning protection devices are designed and tested to the most demanding specifications.
Their rugged construction utilizes solid metal housing, and superior plating, which results in outstanding system protection and
operating continuity
• Superior IM performance for reliable long-term operation
• Excellent electrical performance, low VSWR, low insertion loss
• Waterproof to IP68
• Including grounding wire kit
• Totally maintenance free
Technical Specifications
Surge Arrestor Type Quarter Wave
Design 90° Stub
Coaxial Cable Type Foam Dielectric
Connector Interface 7-16 DIN
Frequency Range - MHz 690 - 2700
Minimum Return Loss, VSWR (dB) 690-2700 MHz: 1.19 (21)
Insertion Loss, dB (Max) 0.10
3rd Order IM Product @ 2x20 Watts, dBc < -160
Center Contact Connector A Brass, silver plated
Outer Contact Connector A Brass, white bronze
Center Contact Connector B Brass, silver plated
Outer Contact Connector B Brass, white bronze
Body Brass, white bronze
Dielectric PTFE
Gasket Silicone
Sealing class IP68
Operation Temperature, °C(°F) -45 to 85 (-49 to 185)
Mounting / Grounding Bulkhead; Thread for grounding M8
Drill Hole Size, mm (in) M8
53. Página
| 53
Tools Feeder Cutting
1/2" Standard Feeder Cutting Tool
Product Model: T-1/2"-EM
Body Material: Hard Aluminium Alloy
Match Cable: 1/2" Standard Feeder Cable
Cut Inner Conductor: 6.0~11.5mm
Stripper jacket: 15.0 & 20.0±1.0mm (Dual-Use)
Working Style: Electric Pistol Drill or Manual Operation
1/2" Superflex Feeder Cutting Tool
Product Model: TOL-1/2"SF-EM
Body Material: Hard Aluminium Alloy
Match Cable: 1/2" Standard Feeder Cable
Cut Inner Conductor: 6.0~11.5mm ***
Keep Dielectric: 2mm (Insulator Dielectric)
Stripper jacket: 20.0±1.0mm (Stripper jacket)
Working Style: Electric Pistol Drill or Manual Operation
1/2" Standard Feeder Cutting Tool
Item Name: 1/2" Standard Feeder Cutting Tool
Product Model: T-1/2-RS
1/2" Superflex Feeder Cutting Tool
Item Name: 1/2" Superflex Feeder Cutting Tool
Product Model: T-1/2SF-RS
7/8" Feeder Cutting Tool
Product Model: TOL-7/8-HXC
Body Material: PP Injection Molding
Match Cable: 7/8" Feeder Cable
Working Style: Manual Operation