2. WHO WE ARE?
Cam Flick Group is registered with Ministry of
Commerce under the law of Cambodia.
Cam Flick Group was founded in 1997 aim to
provide construction services, construction
materials and equipment to all partner,
subcontractors and engineers and workers.
We also provide technical training support to
workers who want become construction leader,
subcontractors…
3. WHAT WE DO?
Formworks, Materials, Tools and
Equipment
Product set up training
Construction
Design
4. Film Faced Plywood,
Plywood for Construction
PONY TEST is a large-scale comprehensive testing organization with service branches around
the country. Our inspection scope covers Factory Audit, Initial Production Check ,First Article
Inspection, Sampling, During Production Inspection, Pre-Shipment Inspection(PSI), Container
Loading Supervision. The inspection product categories included Hard goods, Soft goods, Auto
parts.
Waterproof, wear-resisting, balanced strength, not easy to distort,
not cracking, wide range of size, surface modeling easier, etc.
A:ISO9001 and ISO14001
8. RID WASHER NUT SET
Purpose and Characteristics:
1. Suitable for wood formworks support system, such as wall,
beam abd column cast-in-place reinforced concrete
member.
2. Keep concrete in uniform thickness, metope is flat
3. After the work the metope smooth, mortar plastering
thickness decrease, or no need to plaster, so it can reduce
the cost of plaster(the cost of raw materials and artificial)
4. Waterproof effect is better if increased water stopper lip for
basement, exterior wall, templates support
Rid Washer suitable for steel reinforcement. It can be used
repeatedly.
10. RID WASHER NUT SET
1. Position support template spacing, keep the
component thickness. It can be re-use
2. Separator connection P Cone, it is thickness of
the walls and Pillars.
3. Separator through adopting new materials,
special craft processing, wire diameter 6.9 mm,
tensile strength reached more thans 23 kn
4. Padding concrete is used to fill the P Cone
grooves, simple and easy to construction
16. KKL Washer, 2 P form tie, P cone,
Separator
1. Position support template spacing, keep the
component thickness. It can be re-use
2. Separator connection P Cone, it is thickness of
the walls and Pillars.
3. Separator through adopting new materials,
special craft processing, wire diameter 6.9 mm,
tensile strength reached more thans 23 kn
4. Padding concrete is used to fill the P Cone
grooves, simple and easy to construction
27. Next-Generation system formworks
TZ SYSTEM
Use and Characteristic:
1. Suitable for aluminum panel, plastic
panel and steel form
2. The P cone can remove and re-use
3. Dual-side separator with water stopper
lip, it is effect to water-proof.
29. PINCER STYLE INSERT
Characteristic:
Pre-construction- It is easy to implement and fast
in installation. Easily hammered in
Pincer style insert stay in place with concrete.
Can sue with screw bar and pipe clip
Characteristic:
Using pre-construction anchors can reduce the total cost in construction sharply.
Punching of concrete is not need like when the post-construction anchors
33. Wall Joint- Scaffolding Insert
Use and Characteristic:
1. Wall joint and scaffold insert is easy to implement and fast in
installation. After taking down temporary construction, cover
the hole with specific cap
2. Scaffolding insert stay in place with concrete
3. Wall Joint and Scaffolding insert will connect scaffolding. It is
to implement and fast in installation after,
4. Tensile strength to reach more than 880kg compression
resistance to reach 440kg.
5. I can be re-used
35. Wall Joint- Scaffolding Insert
Example in China
1. Hole is made to match scaffolding support pipe
2. It is cost time, labor, and materials if mend pipe
hole
3. If not taking down, it will affect the later
bricklaying, but taking down it will pose a safety
hazard
36. Wall Joint- Scaffolding Insert
Marks are wall joint points (recommended)
Please change construction pitch conforming to various condition such as
size and height of construction
Examples of wall joint Construction place
37. Combined top and bottom space ,
Bottom Space
Uses and Characteristic:
1. Bottom reinforcing steel keep the cover in correct
2. Fixed spacing between bottom and top. To meet the design
requirement
3. Can be fastened to spacer by binding wire to ensure it’s
never dislocated even when pouring concrete.
4. Base made of plastic, so it does not rust
5. 100-300kg Steel axis does not changing shape nor
deteriorate by heat.
39. Spacer with Levee Crown Point
Uses and Characteristic:
1. Can restore tis vertical standing against external
pressure because of its spring structure.
2. Yellow cap marks the edge of levee crown point,
so it is easy to locate
3. Combined with spacer to prevent dislocation even
when pouring concrete
40. Using of Spacer with Levee Crown Point
Set up bottom bar,
Set up top bar
Adjust the elevation
Pour Concrete
Cut Mark
External Layer
41. LEVEE CROWN POINT
Uses and Characteristic:
1. Can restore tis vertical standing against external
pressure because of its spring structure.
2. Yellow cap marks the edge of levee crown point,
so it is easy to locate
3. Combined with spacer to prevent dislocation even
when pouring concrete
42. Polyester edge timber balk catcher
Purpose and Characteristic:
1. Structure panels have difference and support
mode. Such as elevation difference of the
bathroom floor and indoor floor.
2. Base made of plastic so it does not rust
3. No need for nail disposal effort because of its
pincers type design
43. P Piece with Nail
(S type , L type)
Purpose and Characteristic:
1. Suitable for the over the lateral templates straightening
fixed
2. Ensure that the lateral template in a line
3. Nails are specially designed to fasten composite panel
4. Nail base will be stripped together with composite panel
when formwork is disassemble.
44. TG Net Bracket
Uses and Characteristic:
1. Suitable for between outer layer and the
main building
2. Prevent falling objects because cantilever
hanging nets
3. Does not interfere with wall construction
its stand up design
4. Easy to store because it can be folded in
compact size , also re-use
45. Simple Frame
Uses and Characteristic:
Suitable for exterior scaffolding. It is lightweight, easy to implement
and fast in installation , the safety performance is high.
Composition: Simple frame + Crossing stripe + Safety bar + V +
connection pin
Qualified by Scaffolding and construction Equipment
Association of Japan
46. Exterior Wall Scaffolding
Safety of construction is born from quality. This bar is certified by Scaffolding
and Construction Equipment Association of Japan(SCEA). Safety qualification
provided by SCEA.
Testing Procedure: attach bottom rail to testing jig, and impose a load to central
port.
Loading direction: 3 ways (vertically, extrorsely horizontal cross at right angle,
introrsely horizontal cross at right angle)
Test1 : Bending under pressure of 60 kgf should be less than 100 mm to same
Test 2: Must with stand pressure of 116kgf for 30 seconds.