Atecon products focus on solving the dilemma on how to guarantee the proper cover or distancing between the metallic structure (rebar) and the terrain or formwork.
In any type of of construction site our Accessories will help you achieve better efficiencies, security and productivity
Gurgaon ✡️9711147426✨Call In girls Gurgaon Sector 51 escort service
Atecon product catalogue 2017
1.
2. ATECON®, was created over 20 years ago, with the sole purpose of creating products
and services, which will help you achieve perfect coating heights on your steel rebar
structures. Our product will keep your coating heights always in line with the designs
laid out by your structural engineering staff; increase your productivity by making your
construction site more industrialized, prolonging your construction useful life cycle
and enhancing seismic resistance.
Our products comply with the NTC (Colombia) and NMX (Mexico) technical guidelines
for steel rebar coating elements, making our spacers your best choice for building
under the highest international construction standards. Our unique patented designs
achieve a total compatibility with the concrete used, feature which commonly used
plastic positioners don’t offer, in addition to these technical advantages, we have
economic factors working in our favor, mainly because you will need less units of our
positioners per square meter built.
Please remember fellow civil engineer that insuring the coating height, prevents exter-
nal attacks of gases (carbonation) and liquids on steel and concrete structures, which
in turn disturbs the normal P.H. of concrete, degrading it and finally taking the rebar’s
into a corrosion process, we as civil engineers must guarantee the durability and re-
sistance of the structures we build, these two characteristics are a result of the double
protective action that the concrete mass exercises on steel, on one hand the recover
height creates a physical barrier and on the other hand the elevated alkalinity of
concrete builds a passivating layer which protects the steel rebar’s against corrosion.
Only if we succeed in assuring that the coating height pointed out by the structural
engineer is the right one, can we be sure that the structure will last the years that it
was designed for and in the context of rising recover and durability problems found
in all kinds of constructions all around the world, which in many cases have corroded
until the point of collapse, we present to you our product line.
www.rebarspacerchair.com
Our Company
We guarantee
the recover heights
for steel rebar’s
3. www.rebarspacerchair.com
Horizontal Recover Applications
Clip Mortar (CM):
• This product is one of our clients favorites, because
Atecon® is the only company in America which of-
fers an exclusive patented design of concrete on
the lower part of the spacer (allowing it to blend
seamlessly with the concrete and giving it a high
compression resistance) and a plastic clip restraint
system (which allows a quick and firm hold onto the
rebar), these two characteristic’s give this product
resistance and versatility. It works fine for horizon-
tal as well as vertical formwork applications and can
hold steel rods from ¼” up to 5/8”. Recover heights
go from 20 to 75mm.
• Another advantage of this product in comparison to
plastic or handmade spacers is that our lower ab-
scesses allow the aggregate to flow freely through
them and allow for a uniform consolidation of the
concrete around the spacer, making the Clip Mortar
invisible when the formworks are removed, saving
you time and money in patching labors. Thanks to
their high resistance to big weights you will only
need 1.5 units per square meter.
Exclusive
patented design
4. www.rebarspacerchair.com
Clip Pincers (CP):
• This product works under the same parameters as
the CM, only that its special plastic clip restraint
system, allows a quick and firm hold onto mesh
wires and rods from 3mm up to ¼”, it works for both
horizontal and vertical applications (ideal for hy-
draulic construction). Coating heights range from
20mm up to 75mm. Just as in the CM series, the
CP has lower abscesses which allow the aggregate
to flow freely through them and allow for a uniform
consolidation of the concrete around the spacer,
making the Clip Pincers invisible when the for-
mworks are removed, saving you time and money
in patching labors.
Idealfor mesh or thin rebar’s
Horizontal Recover Applications
5. www.rebarspacerchair.com
Mortar Chair (MC):
• It’s mostly used for foundations, slabs and floors.
It can hold all kinds of steel rods, from thin mesh to
high caliber rebar’s, their coating height go from 20
up to 75mm. their designed to hold up great struc-
tural weight, also to handle high traffic of personnel,
loads, and even machinery, without collapsing, and
of course offering complete compatibility with the
concrete. Average consumption is about 1 and 1.5
units per square meter (half of what you would use
with plastic or handmade rebar chairs).
heavy weights
Designed to
withstand
Horizontal Recover Applications
6. www.rebarspacerchair.com
Vertical Recover Applications
Wheel Spacers /Positioners
(WP and WPD):
• At Atecon® we understand that insuring the correct
recovering diameters is equally important in walls,
columns and pilings as in floors and slabs, this is
why we created the WP and WPD series for these
kinds of vertical applications, the first is used for
¼” up to 5/8” steel rebar’s and the WPD series is
used when steel diameters are lower than ¼”, these
division in our references is made for assuring that
the positioner will have the best possible grip on the
metal structure, allowing for a better fit, reducing
therefore spoilage and failures of these elements
in the concrete pouring procedures while keeping
your steel structure centralized.
• Our wheel spacers are made from high quality
polypropylene, guaranteeing strength and stability
around the central axis of these elements, be-
sides our exclusive designs and quality of materials
used, allow for an auto-lockdown of these spacers
around the periphery of the rebar. They vary in ra-
dius from 25mm up to 75mm (this last diameter is
highly recommended for piling procedures).
High Quality
materials
7. www.rebarspacerchair.com
Double Cage Bridge (DC):
• It’s the perfect solution for achieving constant re-
cover heights for double steel structure applications
(containment walls, industrialized construction sys-
tems, etc…). Their made from the same high quality
materials as our WP and WPD series, allowing the
central axis to lock down firmly on the rebar periph-
ery (auto-lockdown process) and providing excellent
impact resistance in pouring procedures. Average
consumption is about 1.5 units per square meter.
Their length ranges from 100 to 250mm and they
can accommodate rebar’s up to 3/8”.
steel structures
Idealfor double
Vertical Recover Applications
8. www.rebarspacerchair.com
Protective Caps (PC):
• Atecon® wants to help you insure the safety of your
personnel; this is why we developed our protective
caps made from flexible PVC, helping you prevent
common workplace accidents as cutting and pierc-
ing due to exposed ends of the rebar. In addition to
this, these elements will help avoid oxidation at the
end of the mash or rod, and the consequent color-
ing of the concrete with oxidation marks.
Snap Tie (ST):
• They act as form spreaders, allowing for a constant
distance between two form plates. Our snap ties
are made from high carbon steel, which provides
up to 2000kg in resistance, keeping the usage per
linear foot of this element low in contrast with other
similar products. The nicks on each side of the tie
will help making the job of breaking the end of them
an easy job for your workers.
Accessories
Helping you keep
the construction
site safe
Perfect andconstant
wall thickness
Width of
the device
Snap tie
Width of Formwork
Wedge
16mm
thick board
Maximum recommended charge 2000kg
9. www.rebarspacerchair.com
Protective Holsters (PH):
• It’s a great solution for protecting the metal platens in
charge of delimitating the formwork thickness before
beginning concrete pouring procedures on walls.
• It used to be common practice to wrap these
platens in plastic bags and apply a small layer of
lubricant (diesel, kerosene) to prevent this element
from getting trapped inside the concrete structure
once the wall dried, but this method never works
at a 100% rate, and you will have your workers
exposed to flammable materials which can be ex-
tremely dangerous.
• This problem is easily solved by using our expanded
poliethilene holster, which will always work as
intended, allowing easy removal of the platens at
any time.
removal
Easyplaten
Accessories
10. www.rebarspacerchair.com
Accessories
Titulo: Formwork Cones (FC)
• Our plastic formwork cones serve as a guide (to-
gether with a PVC tube) for the tie rod or she bolt
(responsible for tensing your form plates) to go
through easily. Additionally because of their coni-
cal shape they prevent fresh concrete from pouring
out of your walls, creating a seal while you do the
pouring procedures, once the concrete has dried,
you only have to pull them out with a pair of pliers
and proceed to the next wall.
• These cones have a one inch canal diameter, to be
used with 1" thick PVC tubes.
Avoidspills
concrete
11. Atecon® is committed to the quality of its products, therefore if any of our elements
fail, we will replace it with a new one free of charge, making spoilage a thing of the past
in your construction site.
Our Quality
COLOMBIA
Bogotá DC
Carrera 106 # 16 H - 29
Tel.: 4181896
Fax: 2980625
www.rebarspacerchair.com
Email: sales@rebarspacerchair.com
Our Offices
MEXICO
Distrito Federal
Av. Guadalupe Posadas Mz.40 Lt.3
Col. Dario Martinez
Valle de Chalco, Edo de Mex
Tel.: 16431605
www.rebarspacerchair.com
Email: sales@rebarspacerchair.com
Our Versatility
At Atecon® we are conscious that each project holds different recover challenges, so
if you feel that none of our product matches your needs; feel free to contact us, so
that we can create a new solution that will accommodate you.
www.rebarspacerchair.comvisit our web page:
engineering articles
To get information on
our newest products
and selected