Planta pra "Cam Clamp" (grampo)
•
1 like•641 views
Cam clamps are a simple and inexpensive alternative to traditional clamps that take less time to use. They can be easily built at home from wood stock and hardware. The document provides instructions for building cam clamps, including a list of materials needed and step-by-step directions for cutting the pieces, drilling holes, assembling the cam and jaws, and finishing touches like adding cork. With just an evening's work, someone can construct a dozen cam clamps that can exert 200-300 pounds of pressure with just a flick of the wrist.
Report
Share
Report
Share
Download to read offline
Recommended
Entrastamento de Forma Simples!!
This tutorial provides instructions for refretting a fretboard. It describes leveling the fretboard surface using sandpaper up to 2000 grit, checking for straightness and radius with a fretting caul and radius block. The document outlines deepening fret slots if needed using a slotting saw after leveling removes depth. It also details fretting the first 12-14 frets using a neck support caul and arbor press, then trimming excess fret wire. Overall, the tutorial gives a step-by-step process for refretting a fretboard from preparing the surface to fretting and dressing the frets.
Construção de Violões
This document provides a step-by-step guide to building a laminated body Selmer-Maccaferri guitar, detailing each step of the construction process from selecting wood and tools to finishing touches. It covers topics such as producing the body mold, laminating wood layers, assembling internal bracing, binding edges, installing the fingerboard and neck, and final setup. Over 275 photos and 75 diagrams supplement the text to illustrate techniques for novice builders.
Machine Your Fishing Reel - Mechanix Illustrated
This document provides instructions for machining your own fishing reel from aluminum and steel components. It begins by outlining the necessary materials and components, which include aluminum sheets for the back plate, spools, and ring, as well as steel for the ratchet hub and pawl. It then describes constructing a combination jig and fixture from steel to ensure precise alignment during machining. The following sections provide detailed instructions for machining each component through operations like drilling, tapping, turning, and filing. It concludes by describing final assembly of the reel components and adjusting the tension of the spring. With the provided plans and instructions, an enthusiastic fisherman with access to machining tools can construct a top-notch fishing re
Wood reel - bamboo journal 6 - italian bamboo rodmakers association
This document provides details from Enzo Bardus about his process for manufacturing wooden reels for fly fishing rods. It describes:
- Enzo's passion for fly fishing and how he started the hobby as a child using homemade equipment.
- The process for selecting and preparing hardwoods like olive, allowing them to dry for two years before working.
- The step-by-step process for turning the wood on a lathe to create the reel case, including cutting grooves, drilling holes, and shaping.
- Additional steps like adding a copper thread for reinforcement and aluminum strips to prevent abrasion from the line.
Construindo um Violino
Derek Roberts selects wood and prepares the plates for a violin. He flattens and joints the front and back plates from spruce and maple. Derek then glues blocks to a mould and shapes them. Rib structures are built up on the mould with bent maple ribs glued between the blocks. Linings are added to strengthen the ribs. Derek marks and saws out the back plates, rough arching them with gouges. He then marks, saws and arches the front plates. Derek also begins preparing the neck block from maple with carving of the scroll to follow later.
Installing the deck railing
This document provides instructions for installing a deck railing. It begins with an overview of why railings are important for safety and aesthetics and notes that railings must comply with local building codes. It then outlines the steps to install posts, run balusters between posts spaced no more than 6 inches apart, and add top and bottom rails. The instructions estimate project timelines for different skill levels and include cut diagrams. A shop list of needed materials and tools is also provided.
Welcome to Accent Metals, Inc
This document lists various metals, shapes, sizes, and finishes available from a supplier. The metals included are stainless steels, bronzes, brass, aluminum, and nickel silver. Standard shapes are sheets, bars, tubes, squares, angles, tees, channels, and extrusions in maximum sizes up to 102" x 360" for sheets and 12" diameters for round tubing. Finishes range from highly polished mirror finishes to various satin finishes to a matte sandblasted option.
Measuring device
This document provides instructions for creating several homemade devices:
1. A wind turbine generator made from cardboard, dowels, rubber bands, and tape that uses Savonius-style vertical blades to harness wind power. The instructions describe cutting blades and disks, marking angles, and assembling the turbine.
2. A small portable gravitational shield made from a conductive non-ferromagnetic tube and rare earth magnets that are inserted inside to create a field.
3. An improvised measuring device made from common household items like string, a ruler or measuring tape, and weights that can measure the depth of pools or distances without specialized equipment. The instructions explain tying knots in the string and using weights to take accurate underwater
Recommended
Entrastamento de Forma Simples!!
This tutorial provides instructions for refretting a fretboard. It describes leveling the fretboard surface using sandpaper up to 2000 grit, checking for straightness and radius with a fretting caul and radius block. The document outlines deepening fret slots if needed using a slotting saw after leveling removes depth. It also details fretting the first 12-14 frets using a neck support caul and arbor press, then trimming excess fret wire. Overall, the tutorial gives a step-by-step process for refretting a fretboard from preparing the surface to fretting and dressing the frets.
Construção de Violões
This document provides a step-by-step guide to building a laminated body Selmer-Maccaferri guitar, detailing each step of the construction process from selecting wood and tools to finishing touches. It covers topics such as producing the body mold, laminating wood layers, assembling internal bracing, binding edges, installing the fingerboard and neck, and final setup. Over 275 photos and 75 diagrams supplement the text to illustrate techniques for novice builders.
Machine Your Fishing Reel - Mechanix Illustrated
This document provides instructions for machining your own fishing reel from aluminum and steel components. It begins by outlining the necessary materials and components, which include aluminum sheets for the back plate, spools, and ring, as well as steel for the ratchet hub and pawl. It then describes constructing a combination jig and fixture from steel to ensure precise alignment during machining. The following sections provide detailed instructions for machining each component through operations like drilling, tapping, turning, and filing. It concludes by describing final assembly of the reel components and adjusting the tension of the spring. With the provided plans and instructions, an enthusiastic fisherman with access to machining tools can construct a top-notch fishing re
Wood reel - bamboo journal 6 - italian bamboo rodmakers association
This document provides details from Enzo Bardus about his process for manufacturing wooden reels for fly fishing rods. It describes:
- Enzo's passion for fly fishing and how he started the hobby as a child using homemade equipment.
- The process for selecting and preparing hardwoods like olive, allowing them to dry for two years before working.
- The step-by-step process for turning the wood on a lathe to create the reel case, including cutting grooves, drilling holes, and shaping.
- Additional steps like adding a copper thread for reinforcement and aluminum strips to prevent abrasion from the line.
Construindo um Violino
Derek Roberts selects wood and prepares the plates for a violin. He flattens and joints the front and back plates from spruce and maple. Derek then glues blocks to a mould and shapes them. Rib structures are built up on the mould with bent maple ribs glued between the blocks. Linings are added to strengthen the ribs. Derek marks and saws out the back plates, rough arching them with gouges. He then marks, saws and arches the front plates. Derek also begins preparing the neck block from maple with carving of the scroll to follow later.
Installing the deck railing
This document provides instructions for installing a deck railing. It begins with an overview of why railings are important for safety and aesthetics and notes that railings must comply with local building codes. It then outlines the steps to install posts, run balusters between posts spaced no more than 6 inches apart, and add top and bottom rails. The instructions estimate project timelines for different skill levels and include cut diagrams. A shop list of needed materials and tools is also provided.
Welcome to Accent Metals, Inc
This document lists various metals, shapes, sizes, and finishes available from a supplier. The metals included are stainless steels, bronzes, brass, aluminum, and nickel silver. Standard shapes are sheets, bars, tubes, squares, angles, tees, channels, and extrusions in maximum sizes up to 102" x 360" for sheets and 12" diameters for round tubing. Finishes range from highly polished mirror finishes to various satin finishes to a matte sandblasted option.
Measuring device
This document provides instructions for creating several homemade devices:
1. A wind turbine generator made from cardboard, dowels, rubber bands, and tape that uses Savonius-style vertical blades to harness wind power. The instructions describe cutting blades and disks, marking angles, and assembling the turbine.
2. A small portable gravitational shield made from a conductive non-ferromagnetic tube and rare earth magnets that are inserted inside to create a field.
3. An improvised measuring device made from common household items like string, a ruler or measuring tape, and weights that can measure the depth of pools or distances without specialized equipment. The instructions explain tying knots in the string and using weights to take accurate underwater
Tying Bass Poppers Soft foam bodies
1. Soft closed-cell foam popper bodies are tough, durable, and their color never fades. They are difficult to shape without a rotary tool like a Dremel.
2. The document describes how to shape foam popper bodies using a Dremel as a lathe. Foam cylinders are mounted on a mandrel and shaped using sandpaper.
3. Guidelines are provided for selecting the appropriate hook style based on the shaped profile and ensuring the hook is unobstructed. Short shank hooks are best for curved profiles to reduce obstruction of the hook gap.
11. How to paint a shed
The document provides instructions for painting a shed in 6 steps: 1) Clean surfaces and set nail heads, 2) Prime unprimed surfaces, 3) Caulk nail heads and cracks, 4) Paint exterior trim starting from the top down, 5) Cut in the main color around the trim, and 6) Paint the main body using a roller from top to bottom in overlapping strokes. The instructions emphasize starting at the top and working down to avoid drips, applying two coats of paint, and overlapping wet paint.
Making a seiza meditation bench
This document provides instructions for making a simple meditation bench for sitting in the seiza position. It lists the necessary materials which include wood, screws, drill bits, clamps, and sandpaper. It then explains how to cut the wood into legs and a seat, attach reinforcement pieces inside the legs, drill pilot and countersink holes, apply glue and clamp everything together. Some finishing touches like sanding, staining or varnishing are suggested. Sitting on extra pillows for hand support is also recommended.
Wall and floor tiling tools and equipment
This document provides information on tools and equipment used for wall and floor tiling. It discusses planning and preparing for jobs, identifying and selecting both hand and power tools, using tools safely, and cleaning up. Specific tools are defined and their purposes explained, including cutters, levels, hammers, chisels, and other equipment. Safety is emphasized, such as using earth leakage circuit breakers with power tools and following instructions for safe tool use.
Table saw1
The document provides safety instructions for operating a table saw, describing proper procedures for blade height, body placement, kickback prevention, and use of guards, fences, push sticks and offbearers to guide the wood and keep hands away from the blade. Common operations like ripping, cross-cutting and beveling are outlined as well as blade parts, setup, and cleaning up when finished.
7. How to build shed roof
Step by step instruction on how to build a shed. This presentation shows you how to build a shed roof.
Types of Saw
Make use of my presentation with a twist. Learn how this presentation works. It has a game in it. Enjoy and make your students learn on different types of saw :)
9. How to install asphalt roofing on a shed
Step by step instruction on how to build a shed. This presentation shows you how to install asphalt roofing on a shed
Use wall and floor tiling tools and equipment
This document provides information on tools and equipment used for wall and floor tiling. It discusses planning and preparing for jobs, identifying and selecting both hand and power tools for projects. Safety is emphasized, including proper use of tools and safety gear. Specific tools are defined and their purposes explained, including cutters, levels, hammers, chisels and other tools used in tiling work. Proper procedures are outlined for safely cutting tiles by hand.
Carpentary.pptx
This document provides information about carpentry tools and woodworking joints. It discusses various tools used in carpentry like rulers, try squares, marking gauges, saws, planes, mallets and wood lathes. It explains different types of saws including crosscut saws, rip saws, backsaws, compass saws and dovetail saws. It also describes common woodworking joints like halving joints, mortise and tenon joints, housing joints, corner joints, dowel joints and bridle joints.
How to tile a floor
This document provides step-by-step instructions for tiling a floor from start to finish. It begins with safety precautions and preparation steps like measuring the space and selecting tiles. It then outlines the layout process including centering a "key tile" and dry-fitting tiles. Subsequent steps include applying adhesive, laying tiles from the key tile outward, cutting edge tiles, waiting 24 hours, filling edges, grouting, cleaning, and sealing. The overall process takes planning but results in an attractive and durable tiled floor.
Timber decking
This document provides instructions for constructing a timber deck. It discusses measuring and cutting the wood, wearing protective equipment, and disposing of materials properly. Deck boards can be laid out in various patterns that determine joist placement. The frame is then constructed and posts, rails, and spindles are added for safety and appearance. Finally, deck boards are laid out with gaps in between and fastened to complete the surface.
HOW TO DO EASY DIY: Hanging A Door
Whether you're a DIY whizz kid or you'll do anything to avoid doing-it-yourself, we've put together this short how-to guide to helping you with the easy-when-you-know-how task of hanging a door in your home.
Enjoy.
Top Shape Square Edged Work Surfaces
TopShape is a unique, flexible and innovative worktop, combining high quality materials and vibrant colours to create cutting edge designs.
Featuring a contemporary square-edge profile, TopShape will revolutionize your kitchen and bathroom designs.
Table saw safety
The document provides safety instructions for using a table saw. It details specific safety rules like keeping fingers at least 5 inches from the blade and using push sticks. Proper procedures are outlined for ripping stock using the rip fence and crosscutting stock using the miter gauge. Operational techniques like beveling, rabbeting, and dado cuts are also defined.
F-F-Fiddle Assembly Instructions
I've updated the F-F-Fiddle Assembly Instructions with new photos, some improved procedures, and better 3D print quality!
F-F-Fiddle Assembly Instructions
This document provides assembly instructions for an open-source 3D-printable electric violin called the FFF. The summary is:
The assembly involves 17 steps including preparing parts like the neck, bout, bridge and truss rod. Machine heads are installed and strings are run through the neck and attached. Pickups and an amp plug are wired and soldered. Finally, the bridge is installed and the strings are tuned.
4. How to build shed roof rafters
Step by step instruction on how to build a shed. This presentation shows you how to build shed roof rafters.
Glamour princess party_kit_wand
Apply glue to the tabs on one side of the star shape cutout. Align and attach the tabs to the interior edge of the opposite side to form the star. Fold the star to give it shape using mountain and valley folds. Fold and roll part of the remaining paper several times to form the wand handle base. Apply glue along one edge and tightly curl the rest of the paper around the folded base to form the wand handle, attaching the glued edge as it curls around. Insert the handle into the star and let the glue dry to complete the princess wand.
4 classic roubo-style-workbench
I've had a Roubo-style workbench at the top of my
wish-list for quite a while after reading through
Christopher Schwarz's Workbenches: From Design &
Theory to Construction & Use. And, as luck would
have it, three years ago I helped a friend mill several
large trees that they had taken down and, in return,
he was nice enough to give me a bunch of really nice,
thick lumber to use for a workbench. So while that
finishes drying, I thought I'd build a bench from
common construction-grade lumber and experiment
with some design and construction ideas that I've
come across over the years.
Design and Build a Woodworking Workbench: Page 1
Intermediate Level Project
Start
Cola quente animal
Este documento fornece instruções para fazer cola quente animal caseira usando gelatina em pó, água e um banho-maria. A cola é feita misturando gelatina e água e aquecendo a mistura em banho-maria até ficar transparente como uma calda. Ela pode ser usada com um pincel para colagens e deve secar completamente em 24 horas.
Planta de Guitarra Romântica Modelo Stauffer
Planta de guitarra Romântica que segue o modelo de Stauffer
More Related Content
What's hot
Tying Bass Poppers Soft foam bodies
1. Soft closed-cell foam popper bodies are tough, durable, and their color never fades. They are difficult to shape without a rotary tool like a Dremel.
2. The document describes how to shape foam popper bodies using a Dremel as a lathe. Foam cylinders are mounted on a mandrel and shaped using sandpaper.
3. Guidelines are provided for selecting the appropriate hook style based on the shaped profile and ensuring the hook is unobstructed. Short shank hooks are best for curved profiles to reduce obstruction of the hook gap.
11. How to paint a shed
The document provides instructions for painting a shed in 6 steps: 1) Clean surfaces and set nail heads, 2) Prime unprimed surfaces, 3) Caulk nail heads and cracks, 4) Paint exterior trim starting from the top down, 5) Cut in the main color around the trim, and 6) Paint the main body using a roller from top to bottom in overlapping strokes. The instructions emphasize starting at the top and working down to avoid drips, applying two coats of paint, and overlapping wet paint.
Making a seiza meditation bench
This document provides instructions for making a simple meditation bench for sitting in the seiza position. It lists the necessary materials which include wood, screws, drill bits, clamps, and sandpaper. It then explains how to cut the wood into legs and a seat, attach reinforcement pieces inside the legs, drill pilot and countersink holes, apply glue and clamp everything together. Some finishing touches like sanding, staining or varnishing are suggested. Sitting on extra pillows for hand support is also recommended.
Wall and floor tiling tools and equipment
This document provides information on tools and equipment used for wall and floor tiling. It discusses planning and preparing for jobs, identifying and selecting both hand and power tools, using tools safely, and cleaning up. Specific tools are defined and their purposes explained, including cutters, levels, hammers, chisels, and other equipment. Safety is emphasized, such as using earth leakage circuit breakers with power tools and following instructions for safe tool use.
Table saw1
The document provides safety instructions for operating a table saw, describing proper procedures for blade height, body placement, kickback prevention, and use of guards, fences, push sticks and offbearers to guide the wood and keep hands away from the blade. Common operations like ripping, cross-cutting and beveling are outlined as well as blade parts, setup, and cleaning up when finished.
7. How to build shed roof
Step by step instruction on how to build a shed. This presentation shows you how to build a shed roof.
Types of Saw
Make use of my presentation with a twist. Learn how this presentation works. It has a game in it. Enjoy and make your students learn on different types of saw :)
9. How to install asphalt roofing on a shed
Step by step instruction on how to build a shed. This presentation shows you how to install asphalt roofing on a shed
Use wall and floor tiling tools and equipment
This document provides information on tools and equipment used for wall and floor tiling. It discusses planning and preparing for jobs, identifying and selecting both hand and power tools for projects. Safety is emphasized, including proper use of tools and safety gear. Specific tools are defined and their purposes explained, including cutters, levels, hammers, chisels and other tools used in tiling work. Proper procedures are outlined for safely cutting tiles by hand.
Carpentary.pptx
This document provides information about carpentry tools and woodworking joints. It discusses various tools used in carpentry like rulers, try squares, marking gauges, saws, planes, mallets and wood lathes. It explains different types of saws including crosscut saws, rip saws, backsaws, compass saws and dovetail saws. It also describes common woodworking joints like halving joints, mortise and tenon joints, housing joints, corner joints, dowel joints and bridle joints.
How to tile a floor
This document provides step-by-step instructions for tiling a floor from start to finish. It begins with safety precautions and preparation steps like measuring the space and selecting tiles. It then outlines the layout process including centering a "key tile" and dry-fitting tiles. Subsequent steps include applying adhesive, laying tiles from the key tile outward, cutting edge tiles, waiting 24 hours, filling edges, grouting, cleaning, and sealing. The overall process takes planning but results in an attractive and durable tiled floor.
Timber decking
This document provides instructions for constructing a timber deck. It discusses measuring and cutting the wood, wearing protective equipment, and disposing of materials properly. Deck boards can be laid out in various patterns that determine joist placement. The frame is then constructed and posts, rails, and spindles are added for safety and appearance. Finally, deck boards are laid out with gaps in between and fastened to complete the surface.
HOW TO DO EASY DIY: Hanging A Door
Whether you're a DIY whizz kid or you'll do anything to avoid doing-it-yourself, we've put together this short how-to guide to helping you with the easy-when-you-know-how task of hanging a door in your home.
Enjoy.
Top Shape Square Edged Work Surfaces
TopShape is a unique, flexible and innovative worktop, combining high quality materials and vibrant colours to create cutting edge designs.
Featuring a contemporary square-edge profile, TopShape will revolutionize your kitchen and bathroom designs.
Table saw safety
The document provides safety instructions for using a table saw. It details specific safety rules like keeping fingers at least 5 inches from the blade and using push sticks. Proper procedures are outlined for ripping stock using the rip fence and crosscutting stock using the miter gauge. Operational techniques like beveling, rabbeting, and dado cuts are also defined.
F-F-Fiddle Assembly Instructions
I've updated the F-F-Fiddle Assembly Instructions with new photos, some improved procedures, and better 3D print quality!
F-F-Fiddle Assembly Instructions
This document provides assembly instructions for an open-source 3D-printable electric violin called the FFF. The summary is:
The assembly involves 17 steps including preparing parts like the neck, bout, bridge and truss rod. Machine heads are installed and strings are run through the neck and attached. Pickups and an amp plug are wired and soldered. Finally, the bridge is installed and the strings are tuned.
4. How to build shed roof rafters
Step by step instruction on how to build a shed. This presentation shows you how to build shed roof rafters.
Glamour princess party_kit_wand
Apply glue to the tabs on one side of the star shape cutout. Align and attach the tabs to the interior edge of the opposite side to form the star. Fold the star to give it shape using mountain and valley folds. Fold and roll part of the remaining paper several times to form the wand handle base. Apply glue along one edge and tightly curl the rest of the paper around the folded base to form the wand handle, attaching the glued edge as it curls around. Insert the handle into the star and let the glue dry to complete the princess wand.
4 classic roubo-style-workbench
I've had a Roubo-style workbench at the top of my
wish-list for quite a while after reading through
Christopher Schwarz's Workbenches: From Design &
Theory to Construction & Use. And, as luck would
have it, three years ago I helped a friend mill several
large trees that they had taken down and, in return,
he was nice enough to give me a bunch of really nice,
thick lumber to use for a workbench. So while that
finishes drying, I thought I'd build a bench from
common construction-grade lumber and experiment
with some design and construction ideas that I've
come across over the years.
Design and Build a Woodworking Workbench: Page 1
Intermediate Level Project
Start
What's hot (20)
Viewers also liked
Cola quente animal
Este documento fornece instruções para fazer cola quente animal caseira usando gelatina em pó, água e um banho-maria. A cola é feita misturando gelatina e água e aquecendo a mistura em banho-maria até ficar transparente como uma calda. Ela pode ser usada com um pincel para colagens e deve secar completamente em 24 horas.
Planta de Guitarra Romântica Modelo Stauffer
Planta de guitarra Romântica que segue o modelo de Stauffer
Planta de Guitarra Semi Acústica (archtop) nº1
This document contains templates for building an archtop guitar including fretboards, neck profiles, rim, resonator and headstocks. It was modified in January 2004 to include a new stainless steel truss rod style. The templates are scaled at 1:1 and are for a 650mm scale length guitar with fret position markings for the nut, 5th, 12th and 17th frets at a depth of 25mm. It also includes templates for the fretboard radius, bridge, pick guard and other guitar components.
Construção de Cavaquinho
O documento descreve as técnicas e materiais utilizados na construção do cavaquinho, um instrumento musical brasileiro de cordas. Detalha os processos de fabricação do braço, da caixa acústica e da finalização do instrumento, utilizando madeiras como o cedro, o curupixá e o roxinho. A construção do cavaquinho requer habilidade manual e precisão para obter um instrumento de boa qualidade sonora.
Planta de Guitarra Romântica Modelo "La Prevotte"
Planta de Guitarra romântica que segue o modelo "La Prevotte"
Guia dos Roadies
Este documento discute o papel e as responsabilidades de roadies e técnicos de palco. Apresenta as diferentes funções necessárias para montar e operar equipamentos de áudio, iluminação, instrumentos musicais e outras tarefas relacionadas a shows ao vivo. Também fornece informações sobre ferramentas, questões trabalhistas e a importância da profissionalização destes cargos para assegurar o sucesso de apresentações musicais.
Marcenaria basica senai
O documento descreve as principais partes e características de uma plaina desengrossadeira, incluindo a capa protetora, barra traseira, cilindros de avanço e guiamento da madeira, e mesa regulável. Explica como esses componentes interagem para conduzir e pressionar a madeira contra as facas durante o processo de plainagem.
Secagem de Madeiras
1) O documento discute um secador solar desenvolvido para secar madeira na região amazônica, onde as altas taxas de umidade dificultam a secagem ao ar livre.
2) O secador utiliza energia solar para aquecer e circular o ar através de pilhas de madeira, removendo a umidade de forma eficiente.
3) Testes mostraram que o secador pode reduzir a umidade da madeira para níveis adequados para a indústria de móveis em cerca de 3 semanas.
Viewers also liked (12)
Similar to Planta pra "Cam Clamp" (grampo)
Mega Collection of Southwest Inspired Metal Work Jewelry Tutorials
All tutorials are by Judy Larson. Please check www.beadinggem.co for more tutorials and inspirations.
Juguete 03 piezas
The document provides assembly instructions for making an elastic-powered paper turtle model, including cutting out parts along dotted lines and folding along mountain and valley folds before gluing parts together. It recommends scoring fold lines in advance for a neater model and cautions keeping scissors and glue away from small children.
TRU-FIT
This document provides detailed instructions for a new technique called "Tru-Fit Fuselage Construction" developed by Robin Hunt and his son Robby Hunt. The technique allows for molded fuselage shells and a fuselage structure ("crutch") that are perfectly matched without gaps. The instructions explain how to make templates and mold bucks to produce top and bottom fuselage shells that will precisely fit the internal fuselage structure. Multiple templates, plates and mold bucks are cut from materials like balsa, plywood and foam to create molds that yield perfectly fitting shell components for complex fuselage shapes.
Build-It: Bicycle Hacksaw
This document provides instructions for building a bicycle hacksaw. The goals are for participants to learn basic tool use and welding skills. The project involves using a hacksaw, drill, files and other hand tools to cut and shape bicycle parts into a functional hacksaw frame. Key steps include cutting a bicycle handlebar to form the hacksaw body, attaching tensioning systems made from bicycle caliper arms, and drilling/welding everything together. With about 1.5 hours of work, participants will construct a working hacksaw they can take home while gaining practical workshop experience.
Tying Bass Poppers Tool box
This chapter describes the tools and instruments needed to shape popper bodies from balsa wood, cork, high-density foam, and soft foam. The instruments used to attach tail and body materials are also discussed.
Handmade key grips
This project will show how you can make these one-of-a-kind
wooden key grips over an afternoon – with hand tools only
Ten tipstocustomizeyourreelkit
This document provides 10 tips for customizing reel kits, including how to patina brass, drill holes in thin metal sheets, add details to screws and washers, make a click drag, unique grips, raised pillar frames, electroplating, flame polishing Delrin, preventing galvanic corrosion, and adding millgraining. It includes instructions, materials lists, diagrams, and photos to illustrate each technique. The tips were originally published in the author's newsletter and compiled into an eBook to share handy customization ideas for reelsmiths and metalworkers.
Woodworking projects
Instant Access To 16,000 Woodworking Designs, DIY Patterns & Crafts | Popular Woodworking Kits, Ideas and Furniture Plans
400 proyectos de_mini_reloj[1]
This document provides instructions for making miniature clock projects using scroll saw patterns. It begins with an introduction to the book and project themes. Next, it provides tips and techniques for scroll sawing, including using repositionable spray adhesive, selecting wood types, copying patterns, choosing blades, and adding an auxiliary table. The document concludes with directions for sanding, drilling starter holes, stack cutting, sawing thin woods, veining, adding silhouette backing, choosing bases, finishing, and assembling the clock projects.
접이식 자가제작 베틀제작 도면
This document provides instructions to build a collapsible counter-balance floor loom. It details all the materials and tools needed, and provides step-by-step instructions to construct the frame, beams, pedals, lams, harnesses and heddles. Color coding and string attachments are used to connect the pedals to lams and lams to harnesses, allowing the user to control the raising and lowering of the harnesses through foot pedals to create weaving patterns. Once completed, the loom can be used to measure warp threads and weave fabric.
Building a Cedar Strip Canoe
Using basic woodworking skills and tools, building a cedar strip canoe can be completed in 6 easy steps. The process involves constructing a strongback, cutting station molds and strips, nailing the strips to the molds, gluing and sanding, adding fiberglass, and finishing with seats and hardware. With the right plans and materials, one can build their own beautiful cedar strip canoe.
소형베틀도면
This document provides instructions for building a tabletop loom and making its essential components. It can be summarized as follows:
The document instructs the reader on how to cut and assemble wood pieces to construct the basic frame, side rails, and castle of the loom. It then describes cutting rollers and knobs to mount the warp and cloth rollers. Finally, it explains making string heddles and a reed to complete the essential functioning parts of the loom.
Ch 3 Hand Tools.ppt
This chapter discusses basic automotive hand tools. It describes common tools like wrenches, sockets, screwdrivers, pliers, hammers, chisels and punches. Safety rules and proper use and storage of tools is emphasized. A well-organized toolbox and keeping tools maintained is important. Knowing which tool is best for each job allows technicians to work efficiently.
Assemble pocket holes
The document provides instructions for assembling a table with tapered legs and aprons. The steps include making pocket holes using a Kreg jig, laying out and numbering the legs, positioning the legs on the upside down table top with 1x spacers, measuring and cutting the aprons to length, drilling pocket holes in the aprons using the Kreg jig, assembling the table base by screwing the aprons to the legs with coarse thread screws, adding an apron under the top for recessed support, gluing and clamping the base together while checking for square, and finishing by screwing the table top to the base.
AE Hand Tools.pptx
This chapter discusses basic automotive hand tools. It describes common tools like wrenches, sockets, screwdrivers, pliers, hammers, chisels and punches. Safety rules and proper use and storage of tools is emphasized. A well-organized toolbox and keeping tools maintained is important. Knowing which tool is best for each job allows technicians to work efficiently.
Victory rig
The document provides details on constructing the masts, yards and booms of H.M.S Victory from 1805. It describes making the foremast, mainmast and mizzenmast with octagonal sections, as well as the yards and booms. Painting instructions are given with the lower portions of masts painted yellow and the upper portions painted black, and some parts left natural stained walnut. Construction of the bowsprit and other rigging elements is also outlined.
Make your own equipment (Archery)
The document provides instructions for how to make various archery equipment at home, including bow risers, limbs, strings, and other accessories. It describes the necessary materials, tools, and steps to construct each item. Specific directions are given for cutting, shaping, and assembling bamboo limbs and attaching them to a wooden riser. The string construction section outlines using a string jig and winding Dacron strands evenly while maintaining equal tension across all strands.
Measuring and marking
This document provides instructions for accurately measuring and marking materials for woodworking and construction projects. It discusses:
- Using a tape measure, ruler, or sliding bevel to take measurements and transfer them to the material.
- Marking measurements with a pencil, knife, or gauge for cutting.
- Checking measurements for accuracy by measuring diagonals or using a square.
- Dividing materials into equal parts by marking across the grain with a ruler.
- Taking care with tools like retractable rules and marking knives.
AG_1107_01_n.pdf
This document provides an overview of common workshop tools. It identifies and describes various hand tools including hammers, wrenches, pliers, chisels, saws, sandpaper, files and screwdrivers. It emphasizes the importance of using tools properly and keeping them well maintained. The document also discusses power tools, measuring instruments, fasteners like nuts and bolts, and drill bits. Proper tool selection and care are highlighted to perform tasks safely and effectively.
Similar to Planta pra "Cam Clamp" (grampo) (20)
Mega Collection of Southwest Inspired Metal Work Jewelry Tutorials
Mega Collection of Southwest Inspired Metal Work Jewelry Tutorials
More from Gabriel Vandresen
Regulagem de Guitarras Eletricas
Este documento fornece instruções básicas sobre regulagem de guitarra, incluindo preparação da guitarra, troca de cordas, ajuste do tensor, trêmolo e ação. Recomenda-se adquirir a versão completa do manual para instruções detalhadas sobre cada etapa da regulagem.
Madeiras para Guitarras
Este trabalho avalia o potencial de madeiras brasileiras para fabricação de guitarras elétricas, visando substituir espécies importadas e reduzir custos. Foram pré-selecionadas 30 espécies de acordo com suas propriedades e testadas acusticamente. As espécies com melhores propriedades acústicas foram selecionadas para cada parte da guitarra (corpo, braço e escala), indicando seu potencial para fabricação do instrumento.
Base para Micro Retifica
Este documento fornece instruções para construir uma base para micro retífica Dremel utilizando materiais como MDF e conexões de PVC. Ele explica como furar as placas de MDF, cortá-las no formato correto e conectar as peças usando parafusos e porcas. A base resultante pode ser usada para fazer incrustrações em escalas de guitarra e outros trabalhos de marcenaria fina.
Bancadas
Este documento fornece instruções detalhadas para construir uma bancada de marcenaria, incluindo uma lista de materiais, planos de corte, dimensões de peças e etapas de montagem. A bancada terá estrutura robusta de peroba para suportar ferramentas elétricas, tampo de trabalho de 145x55cm e três morsas para fixar peças de madeira durante a fabricação.
Um Estudo sobre a Viola Caipira
O documento discute as relações entre cultura, design e artesanato, apresentando definições destes termos. Em seguida, aborda a luthieria, definindo-a como o ofício de fazer instrumentos musicais e estudando especificamente a luthieria da viola caipira no Brasil. Por fim, analisa as funções da viola caipira e como alterações estéticas podem afetá-las.
Manual de Luteria
Este documento apresenta um manual sobre lutheria, com informações sobre a evolução do violão, cuidados com o ambiente e ferramentas de trabalho, identificação de madeiras e suas aplicações na confecção de instrumentos musicais.
Como Limpar seu Instrumento Musical
O documento fornece instruções sobre como limpar instrumentos musicais de forma segura para preservar o verniz e a madeira. Ele recomenda usar panos úmidos para limpezas leves e pastas polidoras especiais para instrumentos para encardidos, além de limpar com frequência, especialmente após tocar.
Construção de uma Guitarra Havaina
Este documento proporciona instrucciones detalladas para construir una guitarra hawaiana, incluyendo una lista de materiales necesarios como madera, herrajes y accesorios. Explica cómo cortar y dar forma al clavijero y cuerpo de la guitarra usando herramientas como sierra japonesa y cepillo de carpintero. También describe cómo taladrar agujeros para las clavijas y otros pasos para el montaje de la guitarra.
Avaliação de Madeiras Amasônicas para uso em Luteria
O documento descreve um estudo sobre a avaliação de 59 espécies de madeira amazônica para uso em instrumentos musicais. O estudo analisou as propriedades físicas, mecânicas e acústicas das madeiras, testando sua frequência natural de vibração e decaimento, e comparando com espécies tradicionalmente usadas. O objetivo é encontrar alternativas sustentáveis às madeiras ameaçadas atualmente utilizadas e reduzir os custos da indústria musical brasileira.
Escalas Mais Comuns nos instrumentos Eletricos
Medidas de escalas e trastes mais comuns na luteria de elétricos.
Marchetaria
Marchetaria é a técnica de incrustar peças de madeira, marfim ou metal em móveis para formar desenhos. Lâminas de madeira muito finas são usadas para revestir móveis. A Itália é um grande produtor de lâminas de alta qualidade, embora a China também seja uma importante fonte. Móveis populares modernos são produzidos em série com menor qualidade usando madeira aglomerada e laminados impressos.
Madeiras Brasileiras para Luteria
Esta lista preliminar apresenta madeiras da Amazônia potencialmente úteis para guitarras, com densidade entre 0,45-0,65 g/cm3 e contração volumétrica abaixo de 15%. São listadas 71 espécies com informações sobre local de coleta, nome comum e científico, densidade seca, verde e básica, além de taxas de contração. Uma segunda seção lista madeiras acima de 0,8 g/cm3 para escalas.
Construção do Violão Espanhol
El documento describe el proceso de construcción de una guitarra española. Explica cómo se construyeron las herramientas necesarias, incluida una plantilla mediante la cual se trazó la silueta de la guitarra. Luego detalla los pasos para construir el fondo, la tapa armónica, el mástil y los flancos, antes de ensamblar todas las piezas. El autor basó su investigación en un libro y documentó fotográficamente cada etapa del proceso experimental.
O violão de João Gilberto
O documento descreve o violão Di Giorgio Tárrega usado por João Gilberto, incluindo detalhes sobre sua construção e madeiras. O violão foi construído especialmente para João Gilberto nos anos 1960 e ele demorou horas escolhendo o instrumento na loja. Apesar de algumas imperfeições, João Gilberto desenvolveu grande controle e técnica para produzir seu som característico.
Construção do Violão Clássico por Irvin Sloane
A empresa de tecnologia está lançando um novo produto no mercado. O produto é um dispositivo móvel que permite acesso à internet e aplicativos. A empresa espera que o dispositivo seja popular entre os consumidores e gere receita significativa.
Amplificador Valvulado de 100 pratas.
Este documento apresenta o projeto de um amplificador valvulado de baixo custo chamado "100Buck Amp". O amplificador utiliza uma válvula EF184 na pré-amplificação e uma válvula 25L6 como potência, alimentadas por um transformador de 30V + 30V. O projeto custa aproximadamente R$100 reais para ser construído e fornece cerca de 2,2W de potência. Instruções detalhadas sobre componentes, esquema elétrico e layout são fornecidas.
Madeiras para Instrumentos Musicais
O documento discute as propriedades da madeira, incluindo sua classificação na Alemanha como um "Universalrohstoff" ou matéria-prima universal da qual se pode retirar qualquer coisa. Explora também a anisotropia da madeira e sua higroscopicidade, biodegradabilidade e durabilidade. Fornece exemplos das variações dimensionais em diferentes cortes de madeira e imagens microscópicas ilustrando as estruturas de várias espécies de madeira.
Serras e Serrotes
Existem dois tipos principais de dentes em serrotes: dentes rip, em formato de formão para cortes longitudinais, e dentes crosscut, em formato de ponta de faca para cortes transversais. Cada tipo de dente é mais eficiente para o corte correspondente, pois os dentes rip cortam fibras da madeira de forma longitudinal enquanto os dentes crosscut cortam as fibras transversalmente.
Planta para Guitarra Semi acústica (archtop) nº4
This document provides templates for building a mandolin including fretboards, neck profiles, rim, resonator and bridges from January 2004. It has been modified from the original truss rod to a new Watson Bailey-style stainless steel rod and has a 650mm scale length. The document contains templates for fret positions at the nut, 5th, 12th and 17th frets with a bridge depth of 25mm.
Planta para Mandolin n°2
This document contains templates for building mandolins including fretboard profiles, neck shapes, body molds, and bridges. It was last modified in December 2003 to replace the original truss rod design with a new stainless steel rod designed by Watson Bailey. The scale length for the mandolin is 364.8mm.
More from Gabriel Vandresen (20)
Avaliação de Madeiras Amasônicas para uso em Luteria
Avaliação de Madeiras Amasônicas para uso em Luteria
Recently uploaded
Business storytelling: key ingredients to a story
Storytelling is an incredibly valuable tool to share data and information. To get the most impact from stories there are a number of key ingredients. These are based on science and human nature. Using these elements in a story you can deliver information impactfully, ensure action and drive change.
Unveiling the Dynamic Personalities, Key Dates, and Horoscope Insights: Gemin...
Explore the fascinating world of the Gemini Zodiac Sign. Discover the unique personality traits, key dates, and horoscope insights of Gemini individuals. Learn how their sociable, communicative nature and boundless curiosity make them the dynamic explorers of the zodiac. Dive into the duality of the Gemini sign and understand their intellectual and adventurous spirit.
Call8328958814 satta matka Kalyan result satta guessing
Satta Matka Kalyan Main Mumbai Fastest Results
Satta Matka ❋ Sattamatka ❋ New Mumbai Ratan Satta Matka ❋ Fast Matka ❋ Milan Market ❋ Kalyan Matka Results ❋ Satta Game ❋ Matka Game ❋ Satta Matka ❋ Kalyan Satta Matka ❋ Mumbai Main ❋ Online Matka Results ❋ Satta Matka Tips ❋ Milan Chart ❋ Satta Matka Boss❋ New Star Day ❋ Satta King ❋ Live Satta Matka Results ❋ Satta Matka Company ❋ Indian Matka ❋ Satta Matka 143❋ Kalyan Night Matka..
Dpboss Matka Guessing Satta Matta Matka Kalyan Chart Indian Matka
Dpboss Matka Guessing Satta Matta Matka Kalyan Chart Indian Matka➒➌➎➏➑➐➋➑➐➐Dpboss Matka Guessing Satta Matka Kalyan Chart Indian Matka
9356872877Sattamatka.satta.matka.satta matka.kalyan weekly chart.kalyan chart.kalyan jodi chart.kalyan penal chart.kalyan today.kalyan open.fix satta.fix fix fix Satta matka nambar.The APCO Geopolitical Radar - Q3 2024 The Global Operating Environment for Bu...
The Radar reflects input from APCO’s teams located around the world. It distils a host of interconnected events and trends into insights to inform operational and strategic decisions. Issues covered in this edition include:
Innovation Management Frameworks: Your Guide to Creativity & Innovation
Innovation Management Frameworks: Your Guide to Creativity & InnovationOperational Excellence Consulting
[To download this presentation, visit:
https://www.oeconsulting.com.sg/training-presentations]
This PowerPoint compilation offers a comprehensive overview of 20 leading innovation management frameworks and methodologies, selected for their broad applicability across various industries and organizational contexts. These frameworks are valuable resources for a wide range of users, including business professionals, educators, and consultants.
Each framework is presented with visually engaging diagrams and templates, ensuring the content is both informative and appealing. While this compilation is thorough, please note that the slides are intended as supplementary resources and may not be sufficient for standalone instructional purposes.
This compilation is ideal for anyone looking to enhance their understanding of innovation management and drive meaningful change within their organization. Whether you aim to improve product development processes, enhance customer experiences, or drive digital transformation, these frameworks offer valuable insights and tools to help you achieve your goals.
INCLUDED FRAMEWORKS/MODELS:
1. Stanford’s Design Thinking
2. IDEO’s Human-Centered Design
3. Strategyzer’s Business Model Innovation
4. Lean Startup Methodology
5. Agile Innovation Framework
6. Doblin’s Ten Types of Innovation
7. McKinsey’s Three Horizons of Growth
8. Customer Journey Map
9. Christensen’s Disruptive Innovation Theory
10. Blue Ocean Strategy
11. Strategyn’s Jobs-To-Be-Done (JTBD) Framework with Job Map
12. Design Sprint Framework
13. The Double Diamond
14. Lean Six Sigma DMAIC
15. TRIZ Problem-Solving Framework
16. Edward de Bono’s Six Thinking Hats
17. Stage-Gate Model
18. Toyota’s Six Steps of Kaizen
19. Microsoft’s Digital Transformation Framework
20. Design for Six Sigma (DFSS)
To download this presentation, visit:
https://www.oeconsulting.com.sg/training-presentationsPart 2 Deep Dive: Navigating the 2024 Slowdown
Introduction
The global retail industry has weathered numerous storms, with the financial crisis of 2008 serving as a poignant reminder of the sector's resilience and adaptability. However, as we navigate the complex landscape of 2024, retailers face a unique set of challenges that demand innovative strategies and a fundamental shift in mindset. This white paper contrasts the impact of the 2008 recession on the retail sector with the current headwinds retailers are grappling with, while offering a comprehensive roadmap for success in this new paradigm.
Income Tax exemption for Start up : Section 80 IAC
A presentation on the concept of Exemption of Profits of Start ups from Income Tax
一比一原版(QMUE毕业证书)英国爱丁堡玛格丽特女王大学毕业证文凭如何办理
永久可查学历认证【微信：A575476】【(QMUE毕业证书)英国爱丁堡玛格丽特女王大学毕业证成绩单Offer】【微信：A575476】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：A575476】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：A575476】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
Taurus Zodiac Sign: Unveiling the Traits, Dates, and Horoscope Insights of th...
Dive into the steadfast world of the Taurus Zodiac Sign. Discover the grounded, stable, and logical nature of Taurus individuals, and explore their key personality traits, important dates, and horoscope insights. Learn how the determination and patience of the Taurus sign make them the rock-steady achievers and anchors of the zodiac.
Best Forex Brokers Comparison in INDIA 2024
Navigating the world of forex trading can be challenging, especially for beginners. To help you make an informed decision, we have comprehensively compared the best forex brokers in India for 2024. This article, reviewed by Top Forex Brokers Review, will cover featured award winners, the best forex brokers, featured offers, the best copy trading platforms, the best forex brokers for beginners, the best MetaTrader brokers, and recently updated reviews. We will focus on FP Markets, Black Bull, EightCap, IC Markets, and Octa.
Digital Marketing with a Focus on Sustainability
Digital Marketing best practices including influencer marketing, content creators, and omnichannel marketing for Sustainable Brands at the Sustainable Cosmetics Summit 2024 in New York
Zodiac Signs and Food Preferences_ What Your Sign Says About Your Taste
Know what your zodiac sign says about your taste in food! Explore how the 12 zodiac signs influence your culinary preferences with insights from MyPandit. Dive into astrology and flavors!
How MJ Global Leads the Packaging Industry.pdf
MJ Global's success in staying ahead of the curve in the packaging industry is a testament to its dedication to innovation, sustainability, and customer-centricity. By embracing technological advancements, leading in eco-friendly solutions, collaborating with industry leaders, and adapting to evolving consumer preferences, MJ Global continues to set new standards in the packaging sector.
❼❷⓿❺❻❷❽❷❼❽ Dpboss Matka Result Satta Matka Guessing Satta Fix jodi Kalyan Fin...
❼❷⓿❺❻❷❽❷❼❽ Dpboss Matka Result Satta Matka Guessing Satta Fix jodi Kalyan Fin...❼❷⓿❺❻❷❽❷❼❽ Dpboss Kalyan Satta Matka Guessing Matka Result Main Bazar chart
❼❷⓿❺❻❷❽❷❼❽ Dpboss Matka Result Satta Matka Guessing Satta Fix jodi Kalyan Final ank Satta Matka Dpbos Final ank Satta Matta Matka 143 Kalyan Matka Guessing Final Matka Final ank Today Matka 420 Satta Batta Satta 143 Kalyan Chart Main Bazar Chart vip Matka Guessing Dpboss 143 Guessing Kalyan night DearbornMusic-KatherineJasperFullSailUni
My powerpoint presentation for my Music Retail and Distribution class at Full Sail University
Hamster Kombat' Telegram Game Surpasses 100 Million Players—Token Release Sch...
Hamster Kombat' Telegram Game Surpasses 100 Million Players—Token Release Schedule Unveiled
Recently uploaded (20)
Unveiling the Dynamic Personalities, Key Dates, and Horoscope Insights: Gemin...
Unveiling the Dynamic Personalities, Key Dates, and Horoscope Insights: Gemin...
Call8328958814 satta matka Kalyan result satta guessing
Call8328958814 satta matka Kalyan result satta guessing
Dpboss Matka Guessing Satta Matta Matka Kalyan Chart Indian Matka
Dpboss Matka Guessing Satta Matta Matka Kalyan Chart Indian Matka
The APCO Geopolitical Radar - Q3 2024 The Global Operating Environment for Bu...
The APCO Geopolitical Radar - Q3 2024 The Global Operating Environment for Bu...
Innovation Management Frameworks: Your Guide to Creativity & Innovation
Innovation Management Frameworks: Your Guide to Creativity & Innovation
Income Tax exemption for Start up : Section 80 IAC
Income Tax exemption for Start up : Section 80 IAC
Taurus Zodiac Sign: Unveiling the Traits, Dates, and Horoscope Insights of th...
Taurus Zodiac Sign: Unveiling the Traits, Dates, and Horoscope Insights of th...
Zodiac Signs and Food Preferences_ What Your Sign Says About Your Taste
Zodiac Signs and Food Preferences_ What Your Sign Says About Your Taste
❼❷⓿❺❻❷❽❷❼❽ Dpboss Matka Result Satta Matka Guessing Satta Fix jodi Kalyan Fin...
❼❷⓿❺❻❷❽❷❼❽ Dpboss Matka Result Satta Matka Guessing Satta Fix jodi Kalyan Fin...
Hamster Kombat' Telegram Game Surpasses 100 Million Players—Token Release Sch...
Hamster Kombat' Telegram Game Surpasses 100 Million Players—Token Release Sch...
Planta pra "Cam Clamp" (grampo)
- 1. Tip #115 Make Your Own Cam Clamps If you're like most woodworkers, sometimes you just never seem to have enough clamps. And the clamps you do have take forever to unscrew and tighten down again. Here's one possible solution for your problem: cam clamps. They’re simple and inexpensive to build - you can make a dozen of them in an evening - and they’re even simpler to use. Just one flick of the wrist and you can exert 200-300 pounds of pres- sure. Plan of Procedure 1. Cut all stock to size. Take special care to cut the bar stock accurately. Cut out the cam with your Bandsaw or Scroll Saw and carefully sand the flat spot shown in the drawing, using your Disc Sander. 2. Drill all holes, except for those in the bar. Clamp jaws together and cut the recess by making a series of 3/8" holes. Use the same technique to cut the bar slots. Use a rasp or file to smooth the inside of the recess and the slots. 3. Using your Dado set-up to cut the dado for the cam in the sliding jaw...then wsitch to a regular saw blade to cut the long saw kerf. This kerf allows the cam to open and close the jaw, exerting pressure on the pieces being clamped. Assemble the cam to the jaw, using a 3/8” diameter dowel pin as a pivot. IMPORTANT: Do not apply glue to the full length of the dowel pin, as it has to rotate in the clamp body in order for the cam to move and do its job. 4. Round the edge of the bar with a shaper or plane. A Radi-Plane is the ideal tool for this job. Assemble the stationary jaw to the bar, drill holes in the bar (using jaw holes as guides), and insert dowel pins. 5. Assemble the sliding jaw to the bar, drill a hole in the end of the bar opposite the stationary jaw, and insert a dowel pin as a stop peg. 6. Glue cork onto the jaw faces. To use, simply slide the jaw to the desired opening, place the piece to be clamped in between the jaw faces and flip the cam lever. Bill of Materials (in inches) Use Rock Maple, Beech, Ash or Oak A. Jaws(2) 1-1/4 x 1-1/4 x 7 B. Cam 1-1/4 x 4-1/4 x 3/8 C. Bar 1-1/4 x 3/8 x 40(or shorter) D. Pegs (4) 1-1/4 x 3/8 dia. E. Cork (2) 1-1/4 x 1-1/4 x 1/16