This document provides an overview of the chemistry of ingredients used in pastries, cakes, and doughnuts. It discusses the sources, types, properties and functionality of various ingredients including flour, salt, sugar, aerating agents like baking powder and yeast. For each ingredient, the document outlines their composition, suitability for different products, proper storage conditions, and how they impact characteristics like volume, texture and flavor. The focus is on how an understanding of ingredient chemistry can ensure balanced recipes and uniform, high quality baked goods.
INTRODUCTION:
BREAD is a dietary product obtained from the fermentation and the subsequent baking of a dough mainly made of cereal flour and water, made in many different ways and sometimes enriched with typical regional ingredients.
Ingredients of bread:
Flour is the bulking ingredient of bread, it forms the structure of the product,contains gluten which helps to form an elastic stretchy dough.
Yeast is a raising agent. Yeast produces gases to make the bread rise.
Salt is required to bring out flavour in the bread, it is used in small quantities.Too much of this ingredient will stop the yeast from growing.
Yeast needs energy to grow. Sugar provides the food for the yeast; it is needed to help the yeast grow.
Water is used to bind the flour together and helps to form the structure of the bread.
Fats or oils improve the texture of the bread, preventing it from going stale quickly.
Starter culture:
Baker's yeast is the common name for the strains of yeast commonly used as a leavening agent in baking bread and bakery products, where it converts the fermentable sugars present in the dough into carbon dioxide and ethanol. Baker's yeast is of the species Saccharomyces cerevisiae, which is the same species (but a different strain) commonly used in alcoholic fermentation which is called brewer's yeast.
Bread Making Process
Mixing has two functions: to evenly distribute the various ingredients and allow the development of a protein (gluten) network to give the best bread possible.
Once the bread is mixed it is then left to rise (ferment).
Any large gas holes that may have formed during rising are released by kneading.
Moulding the dough into desired loaf shape.
During the final rising the loaf fills with more bubbles of gas, and once this has proceeded far enough they are transferred to the oven for baking.
The loaf is then placed in a preheated oven to bake. Such a high heat will kill the yeast, thus stopping its process of rising and growth.
The whole loaf is cooled to about 35°C before slicing and wrapping can occur without damaging the loaf.
Types of Bread
1. White Bread
2. Brown Bread
3. Wholemeal bread
4. Rye bread
Apart from above there are several types like Crisp bread, Flatbread is often simple, made with flour, water, and salt.
Microbial spoilage
Molds are the primary spoilage organisms in baked goods, with Aspergillus, Penicillium, and Eurotium being the most commonly isolated genera.
Quality control
As a foodstuff, bread is subject to stringent government food processing regulations, including, but not limited to the percent of additives allowed, sterilization of plant equipment, and cleanliness of plant workers. In addition to adhering to these regulations, processors control the quality of their products to meet consumer expectations by installing checkpoints are various stages of the processing.
Widely used bakery raw materials which helps to make bakery and confectionary product. will assist to learn the required raw materials of bakery. learners can understand the basics of bakery department.
Fermentation of bakery products involves yeast converting carbohydrates into carbon dioxide, alcohol, and other compounds. This causes dough to rise and develops flavors. During baking, the alcohol evaporates while other volatile compounds contribute taste. Optimal fermentation softens dough for handling, improves gas retention, and yields a soft texture with fermented flavors in the final product. Key factors that influence fermentation are time, temperature, water content, sugar and salt levels, and dough pH.
Wheat flour products documents various wheat flour products including wheat bread, pasta, and cookies. It discusses the key ingredients and production processes for each. For wheat bread, the three main production methods are described as the sponge and dough process, the straight dough method, and the no-time dough method. The document also outlines the functions of various bread ingredients and enrichment standards. Pasta production involves extruding semolina dough through dies to shape the pasta, which is then dried. Cookie production uses soft wheat flour and controls gluten development to achieve the proper dough consistency.
Fermentation of bakery products group 2 morningsajid ali
This document discusses the fermentation process of bakery products. It begins by defining fermentation as the chemical breakdown of substances by microorganisms like yeast and bacteria. For bakery products, yeast converts sugars in flour into carbon dioxide and alcohol, allowing dough to rise. The document then covers the history of fermented bread, common bakery items, ingredients, the role of leavening agents like yeast, and the chemistry and methods involved in bread making. Both advantages like improved digestibility and nutrition, and disadvantages like possible trans fat and acid production are summarized.
Britannia Industries Limited has been operating since 1892 and is a leading Indian bakery company. It has a 38% market share in India and produces over 400,000 tonnes of biscuits annually. The document provides details about Britannia's Rudrapur production facility, including an overview of the biscuit manufacturing process from receiving ingredients to packaging. Key steps include premixing, creaming, mixing, moulding, cutting, baking, cooling, inspection, stacking and packaging. The facility uses modern machinery and exports biscuits to over 30 international markets.
Bread is the product of baking a mixture of flour, water, salt, yeast and other ingredients. The basic process involves mixing of ingredients until the flour is converted into a stiff paste or.
How bread is made step by step?
How is bread produced?
What is the process of making bread?
Where is bread produced?
bread manufacturing process flow diagram
bread manufacturing process
bread making process in factory
how bread is made in a bakery
how is bread made in factories
how is bread processed
production of bread by fermentation
process of making bread from wheat
INTRODUCTION:
BREAD is a dietary product obtained from the fermentation and the subsequent baking of a dough mainly made of cereal flour and water, made in many different ways and sometimes enriched with typical regional ingredients.
Ingredients of bread:
Flour is the bulking ingredient of bread, it forms the structure of the product,contains gluten which helps to form an elastic stretchy dough.
Yeast is a raising agent. Yeast produces gases to make the bread rise.
Salt is required to bring out flavour in the bread, it is used in small quantities.Too much of this ingredient will stop the yeast from growing.
Yeast needs energy to grow. Sugar provides the food for the yeast; it is needed to help the yeast grow.
Water is used to bind the flour together and helps to form the structure of the bread.
Fats or oils improve the texture of the bread, preventing it from going stale quickly.
Starter culture:
Baker's yeast is the common name for the strains of yeast commonly used as a leavening agent in baking bread and bakery products, where it converts the fermentable sugars present in the dough into carbon dioxide and ethanol. Baker's yeast is of the species Saccharomyces cerevisiae, which is the same species (but a different strain) commonly used in alcoholic fermentation which is called brewer's yeast.
Bread Making Process
Mixing has two functions: to evenly distribute the various ingredients and allow the development of a protein (gluten) network to give the best bread possible.
Once the bread is mixed it is then left to rise (ferment).
Any large gas holes that may have formed during rising are released by kneading.
Moulding the dough into desired loaf shape.
During the final rising the loaf fills with more bubbles of gas, and once this has proceeded far enough they are transferred to the oven for baking.
The loaf is then placed in a preheated oven to bake. Such a high heat will kill the yeast, thus stopping its process of rising and growth.
The whole loaf is cooled to about 35°C before slicing and wrapping can occur without damaging the loaf.
Types of Bread
1. White Bread
2. Brown Bread
3. Wholemeal bread
4. Rye bread
Apart from above there are several types like Crisp bread, Flatbread is often simple, made with flour, water, and salt.
Microbial spoilage
Molds are the primary spoilage organisms in baked goods, with Aspergillus, Penicillium, and Eurotium being the most commonly isolated genera.
Quality control
As a foodstuff, bread is subject to stringent government food processing regulations, including, but not limited to the percent of additives allowed, sterilization of plant equipment, and cleanliness of plant workers. In addition to adhering to these regulations, processors control the quality of their products to meet consumer expectations by installing checkpoints are various stages of the processing.
Widely used bakery raw materials which helps to make bakery and confectionary product. will assist to learn the required raw materials of bakery. learners can understand the basics of bakery department.
Fermentation of bakery products involves yeast converting carbohydrates into carbon dioxide, alcohol, and other compounds. This causes dough to rise and develops flavors. During baking, the alcohol evaporates while other volatile compounds contribute taste. Optimal fermentation softens dough for handling, improves gas retention, and yields a soft texture with fermented flavors in the final product. Key factors that influence fermentation are time, temperature, water content, sugar and salt levels, and dough pH.
Wheat flour products documents various wheat flour products including wheat bread, pasta, and cookies. It discusses the key ingredients and production processes for each. For wheat bread, the three main production methods are described as the sponge and dough process, the straight dough method, and the no-time dough method. The document also outlines the functions of various bread ingredients and enrichment standards. Pasta production involves extruding semolina dough through dies to shape the pasta, which is then dried. Cookie production uses soft wheat flour and controls gluten development to achieve the proper dough consistency.
Fermentation of bakery products group 2 morningsajid ali
This document discusses the fermentation process of bakery products. It begins by defining fermentation as the chemical breakdown of substances by microorganisms like yeast and bacteria. For bakery products, yeast converts sugars in flour into carbon dioxide and alcohol, allowing dough to rise. The document then covers the history of fermented bread, common bakery items, ingredients, the role of leavening agents like yeast, and the chemistry and methods involved in bread making. Both advantages like improved digestibility and nutrition, and disadvantages like possible trans fat and acid production are summarized.
Britannia Industries Limited has been operating since 1892 and is a leading Indian bakery company. It has a 38% market share in India and produces over 400,000 tonnes of biscuits annually. The document provides details about Britannia's Rudrapur production facility, including an overview of the biscuit manufacturing process from receiving ingredients to packaging. Key steps include premixing, creaming, mixing, moulding, cutting, baking, cooling, inspection, stacking and packaging. The facility uses modern machinery and exports biscuits to over 30 international markets.
Bread is the product of baking a mixture of flour, water, salt, yeast and other ingredients. The basic process involves mixing of ingredients until the flour is converted into a stiff paste or.
How bread is made step by step?
How is bread produced?
What is the process of making bread?
Where is bread produced?
bread manufacturing process flow diagram
bread manufacturing process
bread making process in factory
how bread is made in a bakery
how is bread made in factories
how is bread processed
production of bread by fermentation
process of making bread from wheat
The document discusses using dried plums as ingredients in animal protein products like meat and poultry. It provides research showing dried plums can extend shelf life, retain moisture, act as an antimicrobial and antioxidant, and replace phosphates. Dried plums come in forms like puree, powder and fiber that can be added to meat in processing or marinades to improve quality without characterizing flavor.
This document discusses several types of fermented Asian foods including soy sauce, miso, sufu, natto, and idli. It describes the key ingredients and fermentation processes for each food. Soy sauce is produced from fermented soybeans, wheat, and saltwater using molds and bacteria. Miso is made from fermented soybeans with rice or barley and varies in taste depending on ingredients and fermentation time. Sufu involves drying and air fermenting tofu cubes with molds. Natto is made by fermenting soybeans with Bacillus subtilis. Idli involves the bacterial fermentation of rice and black gram dhal batter.
Food ingredients and additives prepared by fermentation andPremson Jp
This document provides information about fermented food ingredients and additives. It discusses how fermentation is used to preserve foods and enhance nutritional value. Specific fermented ingredients from Northeast India are described, including ngari (fermented fish) and hawaijar (fermented soybeans). The document outlines the traditional production processes for these foods. Health benefits of fermented ingredients are noted such as increased digestion and probiotic content. Common fermented food additives like vinegar are also explained, including how vinegar is produced through alcohol fermentation and acetic acid bacteria.
Encapsulation techniques are used to preserve and protect ingredients in foods. Microencapsulation coats droplets of liquids, solids or gases in thin films that control release under different conditions. This allows controlled release of flavors and protects ingredients. Encapsulation finds applications in foods like dry beverage mixes and chewing gum where it prolongs flavor sensation and shelf life. There is also increased demand for encapsulation of vitamins and nutraceutical ingredients to mask strong flavors. Nanocapsules provide targeted delivery systems to carry and release flavors or nutrients when desired. Fabricated and instant foods incorporate encapsulated ingredients to add nutrition and convenience.
This document discusses bread and fermented rice products. It provides definitions of bread as a staple food made from flour, water, and yeast that is baked. The bread making process involves mixing, kneading, fermentation, shaping, baking, and packaging. Fermentation is performed by yeast and lactic acid bacteria, including Saccharomyces cerevisiae and Leuconostoc mesenteroides. These microorganisms produce gases and acids that cause dough to rise and develop flavor. The document also discusses the production of puto, a Filipino rice cake, and bibingka, noting they involve a natural fermentation process similar to bread.
Fermented foods have long been used in Asia to preserve foods using natural processes like lactic acid fermentation. The document categorizes common Asian fermented foods and provides examples from each category, including cereals like idli and mantou, legumes like tempeh and natto, dairy products like yogurt and lassi, and vegetables like kimchi, suan-tsai, and atchara. Many of these foods are important parts of Asian diets and cultures.
This document discusses the role of ingredients in the bakery industry. It identifies major ingredients like flour, water, sugar, leavening agents, and yeast and minor ingredients like milk, eggs, shortening, and emulsifiers. It provides details on the purpose and function of each ingredient. Flour provides structure, water hydrates flour for gluten formation, and sugar adds sweetness and tenderizes. Leavening agents like baking soda and powder produce carbon dioxide to make products rise. Yeast is a living organism that produces carbon dioxide and alcohol during fermentation to allow dough to rise. The document also discusses bread improvers and emulsifiers occasionally added to bakery products.
The document defines various technical terms related to baking science and technology. It includes definitions for ingredients like flours, leaveners, fats, sugars, and other additives. It also defines baking processes, equipment, and tests used to analyze flour and dough properties important for producing quality baked goods. The terms cover topics in baking chemistry, ingredient functions, and production methods.
Britannia Industries Limited (BIL) is a leading Indian food company established in 1892. It has a 38% market share in the Indian bakery industry and an annual production capacity of 433,000 tonnes from its 600,000 retail outlets across India. BIL uses wheat flour, water, fats and oils, sugar, and other ingredients like salt, milk products, flavors and colors to manufacture its popular biscuit brands through processes like premixing, creaming, mixing, moulding, baking, cooling, stacking, and packaging. The company exports around 60 tonnes of biscuits per month to over 30 countries.
The document discusses various fermented soy products and how they are produced. It describes the natural brewing process of soy sauce which involves three steps - koji making by mixing soybeans and wheat with a mold culture, brine fermentation where the koji is mixed with additional ingredients and fermented for months, and refining the liquid into finished soy sauce. It also summarizes the production processes and health benefits of other fermented soy foods like tempeh, miso, and natto. The document emphasizes that traditional fermentation methods improve the digestibility and enhance the nutritional profile of soybeans.
The General process involved in making alcoholic drink from sorghum. This drink is native to Africa especially, west Africa. popularly consumed in Ghana, Nigeria , Togo etc
By products from pulse milling and its utilizationrooshi mk
Pulses are rich in proteins and are mainly consumed after milling, which removes the outer husk and splits the grain. Byproducts of milling include husk, peel, germ, and brokens. Dry milling produces brokens that can be used to make ready-to-fry snacks by cleaning, powdering, sieving, seasoning, kneading, cooking, and extruding. The husk can be used for solid state fermentation to produce tannin acyl hydrolase using red gram husk through inoculation, fermentation, extraction, immobilization, and purification by chromatography. Other byproducts include papad mixes, flour mixes, and animal/cattle feed produced through various preparation
Starch and glucose production in large scaleAlif Hossain
The document describes the process for manufacturing corn starch. It involves the following key steps:
1. Cleaned corn kernels are soaked or "steeped" in water with sulfur dioxide for 24-48 hours to soften them.
2. The steeped kernels are then ground to separate out the germ, which is dried and used to make corn oil.
3. The remaining slurry is further ground and separated using screens and centrifuges to remove fiber, gluten, and produce a purified starch slurry.
4. The starch slurry can then be dried to produce unmodified corn starch or treated to produce modified starches, dextrins, or broken down into glucose.
Biscuit manufacturing process & Quality control.SHAMSHER ALI
The document provides an overview of the biscuit manufacturing process, including:
- Raw materials used such as maida, sugar, HVO, SMP, colors, flavors, and leavening agents.
- Quality control parameters for raw materials like maida and sugar to check for moisture, ash content, acidity, and other factors.
- The biscuit manufacturing process which involves sieving and weighing raw materials, mixing, molding, baking, cooling, packing.
- Equipment layout and manpower requirements are also addressed. Trials were conducted and observations/suggestions were noted.
The document discusses the various raw materials used in bakeries such as flour, sugar, fats, eggs, salt, leavening agents, moistening agents, and emulsifiers. It provides details on the types, sources, and functions of each raw material ingredient. Key raw materials include flour as the backbone, sugar for sweetness and texture, fats for tenderness and shelf life, and yeast for leavening in yeast-raised goods.
This document provides information about the confectionery industry of Z.A. Food, including their products, ingredients, equipment, and processing methods. Z.A. Food is a leading manufacturer of confectionery products in Faisalabad, Pakistan. They produce items like lollipops, center-filled candies, bubble gum, toffees, and sixers. The document describes the ingredients and processing steps for making these different confectionery products.
Parboiling , brewing and their biochemical changesJasmineJuliet
Parboiling rice involves soaking, steaming, and drying rice to improve its flavor, texture and storage properties. It activates enzymes that change the rice's biochemical composition, increasing reducing sugars and nutrients in the endosperm. Brewing beer is also a biochemical process where malted barley and other ingredients are mashed to release sugars, boiled with hops, fermented with yeast to produce alcohol and flavors, and conditioned to create the final product. Both processes rely on enzymatic reactions and microbial activity to transform raw materials into improved foodstuffs.
This document discusses different types of bread spoilage including moldiness, ropiness, and chalky bread. It describes the causes and methods to prevent each type of spoilage. The document also covers theories of bread staling including starch retrogradation, water migration and redistribution, protein-starch interaction, and gluten transformations. Prevention methods for bread staling include using enzymes, shortenings, emulsifiers, reheating, packaging, soy addition, malting, fermentation, and high fiber flour.
Quality control is about inspecting products and trying to take the defective products out. The alternative is a thing called quality assurance. This isn't about inspection, its about putting business processes in place that assure the quality of outputs. Quality control and quality assurance sounds similar but they are quite different.
Fermented alcoholic beverages can be broadly categorized into sugar-based or starch-based types. Sugar-based types include fruit wines, basi (Philippine sugarcane wine), and lambanog (Philippine coconut wine). Their production involves preparing and fermenting various fruits or plant saps. Starch-based types include rice wines like tapuy and sake, beer, and whiskey. Tapuy is a traditional Philippine rice wine while sake is a Japanese rice wine made from fermented steamed rice. Beer is produced from malted barley, water, hops and yeast through mashing, boiling, fermenting and packaging processes. Whiskey involves distilling fermented grains like corn or
BAKERY AND CONFECTIONERY TECHNOLOGY notesMohit Jindal
This document provides an overview of the contents and topics covered in a course on Bakery and Confectionery Technology. The key topics discussed include:
- Raw materials used in bakery products like flour, sugar, shortening, yeast, and leavening agents. The roles and specifications of these raw materials are outlined.
- Manufacturing processes for various bakery products like bread, biscuits, cakes, and other products. Methods for preparation, quality evaluation, and causes of staling are addressed.
- Introduction to confectionery products, ingredients, and industry. Classification of confectionery and details about common sweeteners are provided.
- Layout, hygienic conditions,
This document discusses bread, including its basic ingredients, types, production process, and microbes involved. It notes that bread is made from fermented dough containing flour, water, yeast, and sometimes sugar or salt. The production process involves mixing, kneading, leavening as yeast produces gases, and baking. Saccharomyces cerevisiae is the most common yeast used which raises the dough during fermentation. Molds are the main spoilage microbes in bread if it is not properly stored.
The document discusses using dried plums as ingredients in animal protein products like meat and poultry. It provides research showing dried plums can extend shelf life, retain moisture, act as an antimicrobial and antioxidant, and replace phosphates. Dried plums come in forms like puree, powder and fiber that can be added to meat in processing or marinades to improve quality without characterizing flavor.
This document discusses several types of fermented Asian foods including soy sauce, miso, sufu, natto, and idli. It describes the key ingredients and fermentation processes for each food. Soy sauce is produced from fermented soybeans, wheat, and saltwater using molds and bacteria. Miso is made from fermented soybeans with rice or barley and varies in taste depending on ingredients and fermentation time. Sufu involves drying and air fermenting tofu cubes with molds. Natto is made by fermenting soybeans with Bacillus subtilis. Idli involves the bacterial fermentation of rice and black gram dhal batter.
Food ingredients and additives prepared by fermentation andPremson Jp
This document provides information about fermented food ingredients and additives. It discusses how fermentation is used to preserve foods and enhance nutritional value. Specific fermented ingredients from Northeast India are described, including ngari (fermented fish) and hawaijar (fermented soybeans). The document outlines the traditional production processes for these foods. Health benefits of fermented ingredients are noted such as increased digestion and probiotic content. Common fermented food additives like vinegar are also explained, including how vinegar is produced through alcohol fermentation and acetic acid bacteria.
Encapsulation techniques are used to preserve and protect ingredients in foods. Microencapsulation coats droplets of liquids, solids or gases in thin films that control release under different conditions. This allows controlled release of flavors and protects ingredients. Encapsulation finds applications in foods like dry beverage mixes and chewing gum where it prolongs flavor sensation and shelf life. There is also increased demand for encapsulation of vitamins and nutraceutical ingredients to mask strong flavors. Nanocapsules provide targeted delivery systems to carry and release flavors or nutrients when desired. Fabricated and instant foods incorporate encapsulated ingredients to add nutrition and convenience.
This document discusses bread and fermented rice products. It provides definitions of bread as a staple food made from flour, water, and yeast that is baked. The bread making process involves mixing, kneading, fermentation, shaping, baking, and packaging. Fermentation is performed by yeast and lactic acid bacteria, including Saccharomyces cerevisiae and Leuconostoc mesenteroides. These microorganisms produce gases and acids that cause dough to rise and develop flavor. The document also discusses the production of puto, a Filipino rice cake, and bibingka, noting they involve a natural fermentation process similar to bread.
Fermented foods have long been used in Asia to preserve foods using natural processes like lactic acid fermentation. The document categorizes common Asian fermented foods and provides examples from each category, including cereals like idli and mantou, legumes like tempeh and natto, dairy products like yogurt and lassi, and vegetables like kimchi, suan-tsai, and atchara. Many of these foods are important parts of Asian diets and cultures.
This document discusses the role of ingredients in the bakery industry. It identifies major ingredients like flour, water, sugar, leavening agents, and yeast and minor ingredients like milk, eggs, shortening, and emulsifiers. It provides details on the purpose and function of each ingredient. Flour provides structure, water hydrates flour for gluten formation, and sugar adds sweetness and tenderizes. Leavening agents like baking soda and powder produce carbon dioxide to make products rise. Yeast is a living organism that produces carbon dioxide and alcohol during fermentation to allow dough to rise. The document also discusses bread improvers and emulsifiers occasionally added to bakery products.
The document defines various technical terms related to baking science and technology. It includes definitions for ingredients like flours, leaveners, fats, sugars, and other additives. It also defines baking processes, equipment, and tests used to analyze flour and dough properties important for producing quality baked goods. The terms cover topics in baking chemistry, ingredient functions, and production methods.
Britannia Industries Limited (BIL) is a leading Indian food company established in 1892. It has a 38% market share in the Indian bakery industry and an annual production capacity of 433,000 tonnes from its 600,000 retail outlets across India. BIL uses wheat flour, water, fats and oils, sugar, and other ingredients like salt, milk products, flavors and colors to manufacture its popular biscuit brands through processes like premixing, creaming, mixing, moulding, baking, cooling, stacking, and packaging. The company exports around 60 tonnes of biscuits per month to over 30 countries.
The document discusses various fermented soy products and how they are produced. It describes the natural brewing process of soy sauce which involves three steps - koji making by mixing soybeans and wheat with a mold culture, brine fermentation where the koji is mixed with additional ingredients and fermented for months, and refining the liquid into finished soy sauce. It also summarizes the production processes and health benefits of other fermented soy foods like tempeh, miso, and natto. The document emphasizes that traditional fermentation methods improve the digestibility and enhance the nutritional profile of soybeans.
The General process involved in making alcoholic drink from sorghum. This drink is native to Africa especially, west Africa. popularly consumed in Ghana, Nigeria , Togo etc
By products from pulse milling and its utilizationrooshi mk
Pulses are rich in proteins and are mainly consumed after milling, which removes the outer husk and splits the grain. Byproducts of milling include husk, peel, germ, and brokens. Dry milling produces brokens that can be used to make ready-to-fry snacks by cleaning, powdering, sieving, seasoning, kneading, cooking, and extruding. The husk can be used for solid state fermentation to produce tannin acyl hydrolase using red gram husk through inoculation, fermentation, extraction, immobilization, and purification by chromatography. Other byproducts include papad mixes, flour mixes, and animal/cattle feed produced through various preparation
Starch and glucose production in large scaleAlif Hossain
The document describes the process for manufacturing corn starch. It involves the following key steps:
1. Cleaned corn kernels are soaked or "steeped" in water with sulfur dioxide for 24-48 hours to soften them.
2. The steeped kernels are then ground to separate out the germ, which is dried and used to make corn oil.
3. The remaining slurry is further ground and separated using screens and centrifuges to remove fiber, gluten, and produce a purified starch slurry.
4. The starch slurry can then be dried to produce unmodified corn starch or treated to produce modified starches, dextrins, or broken down into glucose.
Biscuit manufacturing process & Quality control.SHAMSHER ALI
The document provides an overview of the biscuit manufacturing process, including:
- Raw materials used such as maida, sugar, HVO, SMP, colors, flavors, and leavening agents.
- Quality control parameters for raw materials like maida and sugar to check for moisture, ash content, acidity, and other factors.
- The biscuit manufacturing process which involves sieving and weighing raw materials, mixing, molding, baking, cooling, packing.
- Equipment layout and manpower requirements are also addressed. Trials were conducted and observations/suggestions were noted.
The document discusses the various raw materials used in bakeries such as flour, sugar, fats, eggs, salt, leavening agents, moistening agents, and emulsifiers. It provides details on the types, sources, and functions of each raw material ingredient. Key raw materials include flour as the backbone, sugar for sweetness and texture, fats for tenderness and shelf life, and yeast for leavening in yeast-raised goods.
This document provides information about the confectionery industry of Z.A. Food, including their products, ingredients, equipment, and processing methods. Z.A. Food is a leading manufacturer of confectionery products in Faisalabad, Pakistan. They produce items like lollipops, center-filled candies, bubble gum, toffees, and sixers. The document describes the ingredients and processing steps for making these different confectionery products.
Parboiling , brewing and their biochemical changesJasmineJuliet
Parboiling rice involves soaking, steaming, and drying rice to improve its flavor, texture and storage properties. It activates enzymes that change the rice's biochemical composition, increasing reducing sugars and nutrients in the endosperm. Brewing beer is also a biochemical process where malted barley and other ingredients are mashed to release sugars, boiled with hops, fermented with yeast to produce alcohol and flavors, and conditioned to create the final product. Both processes rely on enzymatic reactions and microbial activity to transform raw materials into improved foodstuffs.
This document discusses different types of bread spoilage including moldiness, ropiness, and chalky bread. It describes the causes and methods to prevent each type of spoilage. The document also covers theories of bread staling including starch retrogradation, water migration and redistribution, protein-starch interaction, and gluten transformations. Prevention methods for bread staling include using enzymes, shortenings, emulsifiers, reheating, packaging, soy addition, malting, fermentation, and high fiber flour.
Quality control is about inspecting products and trying to take the defective products out. The alternative is a thing called quality assurance. This isn't about inspection, its about putting business processes in place that assure the quality of outputs. Quality control and quality assurance sounds similar but they are quite different.
Fermented alcoholic beverages can be broadly categorized into sugar-based or starch-based types. Sugar-based types include fruit wines, basi (Philippine sugarcane wine), and lambanog (Philippine coconut wine). Their production involves preparing and fermenting various fruits or plant saps. Starch-based types include rice wines like tapuy and sake, beer, and whiskey. Tapuy is a traditional Philippine rice wine while sake is a Japanese rice wine made from fermented steamed rice. Beer is produced from malted barley, water, hops and yeast through mashing, boiling, fermenting and packaging processes. Whiskey involves distilling fermented grains like corn or
BAKERY AND CONFECTIONERY TECHNOLOGY notesMohit Jindal
This document provides an overview of the contents and topics covered in a course on Bakery and Confectionery Technology. The key topics discussed include:
- Raw materials used in bakery products like flour, sugar, shortening, yeast, and leavening agents. The roles and specifications of these raw materials are outlined.
- Manufacturing processes for various bakery products like bread, biscuits, cakes, and other products. Methods for preparation, quality evaluation, and causes of staling are addressed.
- Introduction to confectionery products, ingredients, and industry. Classification of confectionery and details about common sweeteners are provided.
- Layout, hygienic conditions,
This document discusses bread, including its basic ingredients, types, production process, and microbes involved. It notes that bread is made from fermented dough containing flour, water, yeast, and sometimes sugar or salt. The production process involves mixing, kneading, leavening as yeast produces gases, and baking. Saccharomyces cerevisiae is the most common yeast used which raises the dough during fermentation. Molds are the main spoilage microbes in bread if it is not properly stored.
This document provides information on the manufacturing processes for various fermented foods including bread, beer, and cheese. It discusses the roles of bacteria, yeast, and moulds in food fermentation and describes the fermentation of specific foods like bread, beer, cheese, and soy sauce. The document also outlines the benefits of fermented foods for consumers and provides details on industries involved in bread manufacturing.
Bread is one of humanity's oldest foods obtained from fermented and baked dough made from cereal flour and water. The basic ingredients in bread are flour, water, yeast, and salt. Yeast produces gases that cause the bread to rise during baking. Different types of bread exist depending on ingredients used and production method. The bread making process involves mixing ingredients, kneading, rising, baking, and cooling. Yeast and bacteria play important roles in leavening and developing flavor. Care must be taken to ensure proper moisture, pH, temperature and salt levels to allow yeast to grow and bread to rise properly while preventing spoilage during storage.
Bread is one of humanity's oldest foods obtained from fermented and baked dough made from cereal flour and water. The basic ingredients in bread are flour, water, yeast, and salt. Yeast produces gases that cause the bread to rise during baking. Different types of bread exist depending on ingredients used and production method. Proper moisture, pH, temperature, and water conditions are required for yeast growth and fermentation. Microbes like yeast and bacteria play an important role in leavening, flavor development, and potential spoilage if conditions are not suitable. The baking process sets the loaf structure, kills yeast, and develops flavors through chemical reactions like Maillard browning.
The document discusses the key ingredients and processes involved in bread making. It provides information on various flour parameters like moisture content, protein content, ash content, and how they impact bread quality. It also discusses the roles of other ingredients like water, salt, sugar and yeast. Water is important for gluten formation and fermentation. Salt strengthens gluten and improves flavor while sugar feeds the yeast. Yeast is the main leavening agent and produces carbon dioxide through fermentation. The document outlines the fermentation process and optimal conditions for yeast activity.
Baking relies on chemical interactions between ingredients like flour, yeast, fat, sugar, and leavening agents. Flour provides structure from gluten proteins. Yeast feeds on starches to produce carbon dioxide that aeras the dough. Fat and sugar contribute tenderness, while baking soda and powder produce carbon dioxide through chemical reactions to cause rising. Laboratories precisely test ingredients and finished products to ensure consistent quality and performance of commercial baked goods.
bread processing ( alok roy patowari).pptxNisarHossain
This document provides information about a seminar presentation on bread processing. It introduces bread as a dietary product made from fermented dough containing cereal flour and water. The key ingredients in bread and their functions are described, including flour, yeast, salt, water, and optional ingredients like sugar and fat. Various bread making methods and the steps in the bread production process are outlined, from sieving and weighing ingredients to shaping, proofing, baking, cooling and packaging the finished bread. Common defects in bread like lack of volume or coarse grain are identified along with their potential causes.
Britannia Industries is India's largest biscuit manufacturer with a market share of 38%. This document outlines the manufacturing processes for Good Day butter biscuits and bourbon biscuits at Britannia's Uttaranchal plant. It describes the key ingredients for each biscuit type, from wheat flour and sugar to fats and flavors. The processing steps include premixing, creaming, mixing, molding, baking, cooling, and packaging. Baking is a multi-zone process to set the structure, release ammonia, remove moisture, and develop color and flavor.
This document provides information about bread processing and production. It discusses the key ingredients in bread such as flour, yeast, sugar, fat, salt, and water. It outlines different types of bread like pan breads, flatbreads, and rye bread. The document then describes the various steps involved in bread making, including pre-fermentation, dough mixing, rounding, proofing, baking, and cooling. It also discusses different bread making systems like the straight dough process, sponge dough process, and Chorleywood bread process.
This document provides an overview of a chapter on basic baking that covers the history of baking, major ingredients used in baking and their functions, basic tools and equipment, and principles of baking. It begins with discussing how baking originated from grinding grains and includes the earliest biblical references to baking. It then classifies and describes the major ingredients used in baking such as flours, liquids, fats, sugars, leavening agents, and eggs. The document also identifies and explains various tools and equipment used in baking processes and ovens. Finally, it outlines basic principles of baking including accurately measuring ingredients, using the exact ingredients specified in recipes, and following correct mixing and baking procedures.
understanding ingridients in baking.pptxJODETHNAVAJA
This document discusses ingredients used in baking breads. It focuses on flour and sugar, describing their properties and types. For flour, it explains that wheat is the principal source and different types include bread, cake, all-purpose, and pastry flour. It also discusses the properties that determine a flour's strength like color, gluten content, absorption capacity and texture. For sugar, it explains that sugar provides sweetness, tenderness and browning and lists common types like granulated, brown, confectioners' and syrups.
Baking involves cooking food using dry heat. Different types of flour are used for different baked goods, such as wheat flour for bread making due to its high protein content. Sugars include granulated, confectioners, and brown sugar. Leavening agents that cause dough to rise include yeast, baking soda, baking powder, and mechanical methods like creaming. Fats used include butter, vegetable oils, shortening, and lard. Technical terms include gluten, wheat, crumb, and fermentation. Key ingredients are flour, eggs, sugar, shortening agents, and leavening agents.
ARUL PRABHA V BREAD MAKING - ROLE OF INGREDIENTS.pptxArulSubha
Bread is made from a dough of flour, water, and other ingredients that is baked. Flour provides structure and contains proteins like glutenin and gliadin that form strands and bridges when kneaded to form gluten, giving bread its structure. Water hydrates ingredients and produces steam during baking to increase volume. Additional ingredients like sugar, yeast, salt, milk, and shortening provide flavor, nutrition, and texture properties. Yeast produces gas through fermentation to make the dough rise before baking.
baking ingredients and its functions [Autosaved].pptxMariaManoaGantala
This document provides an introduction to basic baking ingredients. It lists the major ingredients like flour, sugar, leavening agents, eggs, shortening, and liquid. It then describes each major ingredient in more detail, covering their functions, types, and proper handling and storage. The document aims to help readers identify and understand the key components used in baking.
This document discusses various baking ingredients and their properties, focusing on wheat flour. It defines flour as a finely ground powder made from grains. Wheat flour is the most common type and is milled from wheat kernels. There are three main types of wheat flour available in the Philippines - all-purpose flour, bread flour, and pastry flour. The document outlines the properties of flour, including moisture content, protein content, enzymes, lipids, and starch. It also discusses the classification, types, and market forms of wheat used to produce various flours.
Fenix Gluten Free products from Klasje Celje Slovenia (EU)Tadej Sadar
The document discusses gluten-free products made by the Fenix brand in Slovenia. It provides information on the company KLASJE CELJE, which has produced Fenix brand products since 1982. It offers a wide selection of gluten-free baked goods, pastas, and cookies made from ingredients like millet, quinoa, rice and maize flour. The products aim to provide tasty, healthy options for those with gluten intolerance or sensitivity. Nutrition information and ingredients are provided for several product examples like bread blend, tagliatelle pasta, and cookies with various fillings.
The document discusses various topics related to bread science and technology. It covers different types of bread like white bread, wholemeal bread, multigrain bread, and flatbreads. It describes the basic steps in the bread making process and discusses key ingredients like wheat flour, yeast, and minor additives. The document also covers the nutritional composition and qualities of different breads.
1. THE CHEMISTRY OF
PASTRY, CAKES AND DOUGHNUT
By
Dr. J. Obiora Onuora
Presented at
NIFST IN-HOUSE WORKSHOP ON THE
“SCIENCE AND TECHNOLOGY OF PASTIE AND
CAKE PRODUCTION”
FOR UAC FOODS CENTRAL KITCHEN
MANAGERS.
2. ON MAY 21 -22, 2007
AT Ojota, Lagos
Ingredients Chemistry
A simple account of the sources, types, composition, properties and functionality of various ingredients used in
pastries, cakes and doughnuts.
2.1 Flour and meals
SOURCE
Flour is obtained from the cereal wheat. A grain of wheat consists of three main parts, the endosperm, bran and germ:
1. Endosperm is the white part of the wheat grain from which white flour is obtained.
2. Bran is the outside skin of the wheat grain and is blended with the endosperm to produce brown flours.
3. Germ is located inside the wheat grain and is the embryo from which wheat can reproduce itself. The germ is
used in germ meal and wholemeal flour.
The main wheat exporting countries are Canada, USA, and Argentina.
FLOUR MILLING
Flour millers clean the grains of wheat and bring them to the appropriate condition for the milling process. The grains
are arranged into appropriate blends, and are separated and reduced during the milling process into very fine particles.
The extraction rate is the quantity of flour that is obtained from a given amount of wheat; for example:
• If a flour miller obtains 70 kg of white flour from 100 kg of wheat, the extraction rate equals 70%.
• If the flour miller obtains 100 kg of wholemeal (whole wheat) flour from 100 kg of wheat, the extraction rate equals
100%.
CONSTITUENTS OF FLOUR
1. White flour – see Table 1.
Table 1 Constituents of white flour
2
3. Strong flour % Constituents Soft flour %
69.00 Starch 71.50
13.00 Insoluble gluten forming proteins 8.30
13.00 Moisture 14.50
2.50 Sugar 2.20
1.00 Fat 1.50
1.00 Soluble proteins 1.00
0.50 Mineral salts 1.00
2. Brown flour and meals – the Bread and Flour (Amended) Regulations 1972 states that
• Brown flour contains a minimum of 0.6% fibre
• Wholemeal flour contains 100% of the wheat grain.
• Germ meal contains a minimum of 10% wheat germ
INSOLUBLE GLUTEN FORMING PROTEINS
The insoluble proteins are known as gluten which is produced in bread dough for example, when water has been added and the dough
has been mixed sufficiently to develop the gluten. The suitability of flour for bakery products is determined by the quality of gluten and
in some cases the quantity it contains. Flour that contains good quality gluten is known as strong flour; flour that contains low quality
gluten is known as soft flour.
TYPES
The type of flours used to make bakery products can be classified into five categories:
1. Strong flours.
2. Medium flours.
3. Soft flours.
4. Special white flours.
5. Brown flours and meals.
PROPERTIES
Flour is a major structural agent and has an important effect upon the formation of these characteristics of a product.
• volume
• colour
• eating qualities
• texture
• flavour
• nutritional value
SUITABILITY FOR THE PRODUCT
1. Strong flours are used to make bread and fermented products and puff pastry.
2. Medium flours are used to make short pastries, powder aerated products and some fruit cakes.
3. Soft flours are used to make cake and sponge products.
4. Special white flours are known as high ratio cake flour and high protein cake flour. High ratio flour is used to make cakes that
contain a high level of sugar and liquid to the quantity of flour. High protein is used to make cakes that contain a high level of
fruit to the quantity of flour.
5. Brown flours and meals are used to make bread and fermented products, short pastry, power aerated products, and cake
and sponge products. These flours and meals contain larger particles than white flour because of the presence of bran and
germ. They confer a pronounced flavour to a product and are particularly popular with consumers who follow a healthy diet.
Note: Flour is an important dusting material which prevents sticking during processing methods, and can be used as a finish for
products prior to baking.
FEATURES OF GOOD CONDITION
Flours and meals are fit to use if:
• free from infestation
• free from physical contamination (for example, metal objects)
• free from excess moisture
• free from rancidity
3
4. • used within the recommended period.
ACCURATE WEIGHING
Flour must be weighted accurately to ensure that
• the recipe remains balanced
• a uniform product is obtained
• the correct yield is obtained
• faults are prevented
PREPARATON FOR USE
All flours and meals must be sieved prior to use, using a fine sieve for white flour and a coarse sieve for meals. The reasons for sieving
flours and meals are:
• to remove lumps
• to remove physical contamination (for example, metal objects)
• to blend with other dry ingredients
• to lighten and assist the mixing process
SUITABLE STORAGE CONDITIONS
Flours and meals should be stored in the following appropriate conditions to prevent deterioration, leading to wastage:
1. Temperature: 10 – 16
o
C (50 – 60
o
F).
2. Environment: dry conditions.
3. Time limit:
White flours – 3 to 6 months.
Brown flours – 3 months
Meals – 2 weeks.
Use strict stock rotation.
2.2 Salt
SOURCE
Salt is a natural mineral that is found in many part of the world.
♦ 40% sodium
♦ 60% chlorine.
The chemical name for salt is sodium chloride
TYPES
There are two types of salt
1. Vacuum salt
2. Sea salt.
PROPERTIES
Salt possesses the following properties and benefits for use in bakery products:
♦ Control the rate of fermentation within doughs and the final volume
♦ Strengthens the gluten
♦ Enhances the flavour and eating quality
♦ Improves crust and crumb colour
♦ Improves crumb stability
♦ Improves the shelf life.
SUITABILITY FOR THE PRODUCT
Small percentages of salt are used in the production of bread and fermented goods, savoury paste and filling, puff paste, powder
aerated products and some cakes.
4
5. FEATURES OF GOOD CONDITION
Salt is fit to use if:
♦ free from physical contamination (for example, metal objects).
♦ Free from excess moisture and free running.
ACCURATE WEIGHING
Salt must be weighed accurately to ensure that:
♦ the recipe remains balanced
♦ a uniform product is obtained
♦ the correct yield is obtained
♦ faults are prevented.
Note: Excess salt in a dough or filling can have a disastrous effect upon the final product, rendering it inedible.
PREPARATION FOR USE
Salt must be sieved prior to use in order to blend with other dry ingredients and to remove any physical contamination.
SUITABLE STORAGE CONDITIONS
Salt is hygroscopic and should be stored in the following appropriate conditions to prevent the retention of moisture:
1. Temperature 14 – 21
o
C (57 – 70
o
F).
2. Environment: dry, airtight conditions.
3. Time limit: keeps indefinitely.
2.3 Sugar
SOURCE
Sugar is obtained from two sources: cane and beet sugar. They are natural substances and belong to the chemical group of
carbohydrates which consist of carbon, hydrogen and oxygen. During and after the refining of sugar, it can be categorized into two
divisions:
♦ grains
♦ syrups
TYPES
1. Grains:
<> caster sugar – fine crystals
<> granulated – coarse crystals
<> nib sugar – large crystals
<> cube sugar
<> brown sugar – fine to coarse crystals
<> icing sugars – fine powder
2. Syrups:
<> golden syrup
<> treacle
<> glucose
PROPERTIES
Sugar and syrups possess the following properties and benefits for use in bakery products:
♦ sweeten
♦ shorten, lift and lighten the crumb
♦ enhance the flavour and eating quality
♦ caramelize and provide crust colour
♦ improve the shelf life
♦ important yeast food during the fermentation of doughs.
SUITABILITY FOR THE PRODUCT
The importance and versatility of sugar to the baker is demonstrated by its use in the production of fermented products, sweet pastries,
enriched pastes, powder aerated products, cakes and sponges.
5
6. FEATURES OF GOOD CONDITION
Sugar and syrups are fit to use if:
♦ free from physical contamination
♦ free from excess moisture
ACCURATE WEIGHING
Sugar and syrup must be weighed accurately to ensure that:
♦ the recipe remains balanced.
♦ A uniform product is obtained
♦ The correct yield is obtained
♦ Faults are prevented
PREPARATION FOR USE
The method of preparing sugar for addition to a recipe depends upon the mixing process. It can be added in the following ways:
♦ dissolved in liquid prior to addition
♦ sieved with dry ingredients.
SUITABLE STORAGE CONDITIONS
Sugar is hygroscopic and should be stored in the appropriate conditions below to prevent the retention of moisture:
1. Temperature: 14 – 21
o
C (57 – 70
o
F).
2. Environment: dry, airtight conditions.
3. Time limit: keeps indefinitely.
2.4 Aerating Agents
2.4.1 Chemical Leaveners
2.4.1.1 Baking powder
SOURCE
Baking powder is a mixture of acid and alkali. The acid content can be Cream of tartar or Cream Powder and the alkali content is
Bicarbonate of Soda. They are mixed together in the following ratios:
♦ 2.25 parts of Cream of Tartar with 1 part Bicarbonate of Soda
♦ 2 parts of Cream Powder with 1 part Bicarbonate of Soda.
Preparation involves sieving together the two chemicals several times to ensure thorough dispersal. Of course, ready - made baking
powder is available and preferred by most bakers.
TYPES
Generally, baking powder is a standard raw material.
PROPERTIES
Baking powder is responsible for the aeration, final volume and crumb structure of a product. When baking powder becomes moist
during the mixing process and heated in the oven, there is a reaction between the acid and alkali which produces carbon dioxide gas.
The gas is present and retained throughout the fabric of the mixture. It lifts the product to its final volume which is maintained until the
baking process is complete.
Note: The generation of gas from the reaction between the acid and alkali when subjected to moisture and heat only occurs once – it
cannot be repeated. For this reason, mixtures containing baking powder must be kept cool (21
o
C) (70
o
F) and below) prior to baking.
This will ensure that the production of carbon dioxide gas following the reaction will happen in the oven, and this will result in the
aeration of the product.
SUITABILITY FOR THE PRODUCT
Small percentages of baking powder are used in the production of sweet pastry, enriched pastes, powder aerated products and cakes.
FEATURES OF GOOD CONDITION
Baking powder is fit to use if:
♦ acid and alkali content are thoroughly dispersed
♦ free from physical contamination (for example, metal objects)
6
7. ♦ free from excess moisture
♦ used within the recommended period
ACCURATE WEIGHING
Baking powder must be weighed accurately to ensure that:
♦ the recipe remains balanced
♦ a uniform product is obtained
♦ the correct yield is obtained
♦ faults are prevented.
Note: Excess baking powder in a mixture can have a disastrous effect upon the final product, rendering it inedible.
PREPARATION FOR USE
Baking powder may require sieving several times prior to weighing, to ensure that the contents are thoroughly dispersed. The reasons
for sieving baking powder are:
♦ to remove lumps
♦ to remove any physical contamination (for example, metal objects)
♦ to blend with other dry ingredients.
SUITABLE STORAGE CONDITIONS
Baking powder is hygroscopic and should be stored in the appropriate conditions below to prevent the retention of moisture:
1. Temperature: 10 – 16
o
C (50 – 61
o
F).
2. Environment: dry, airtight conditions.
3. Time limit: 6 to 12 months.
Use in strict stock rotation.
2.4.2 Yeast
SOURCE
Yeast is a species belonging to the fungi family of plants. The strain used by the baker is Saccharomyces Cerevisiae.
Structure
Yeast is a living single cell organism, oval in shape that can only be seen under a microscope.
The average composition of a yeast cell is:
♦ 71% moisture
♦ 14% protein
♦ 10% carbohydrates
♦ 3% mineral matter
♦ 2% fat
Reproduction
Yeast has two methods of reproduction:
♦ Budding – occurs when conditions are favourable
♦ Sporulation – occurs when conditions are unfavourable.
♦ Budding Under favourable conditions, yeast cells will reproduce by the process of budding. The favourable
conditions are:
♦ sufficient food and simple sugars
♦ ample moisture
♦ warmth – 27 to 29
o
C (80 to 84
o
F)
♦ adequate time.
A small bud appears on the wall of the yeast cell and continues to grow until it becomes equal in size to the original cell. At the same
time, the constituents of the cell move towards the new cell, before they divide equally between the original and newly formed cell.
When the process has been completed, the new cell breaks away and the reproduction process continues.
7
8. Sporulation Under unfavourable conditions, yeast cells will reproduce by sporulation. The unfavourable conditions are:
♦ insufficient food
♦ lack of moisture
♦ unsuitable temperature
When food and moisture are not available in sufficient quantities, the nucleus will use up all the food that is present within the
cytoplasm. The nucleus then divides, usually into four, and the cell wall thickens to offer greater protection to the yeast spores. The
yeast spores are able to survive in this condition for very long periods of time until they regain favourable conditions and reproduce by
the budding process.
TYPES
Yeast is available in these forms:
1. Compressed
2. Dried
3. Liquid
PROPERTIES
The activity of yeast within a dough is called fermentation. During fermentation, simple sugars are produced as food for the yeast. The
yeast cells are able to absorb and use the food to produce large quantities of carbon dioxide gas and a small amount of alcohol. As a
result of the fermentation process, yeast has effect upon the following characteristics of a product:
♦ the expansion and final volume
♦ the mellowing of the gluten to obtain a uniform shape and soft crumb
♦ flavour produced during the fermentation process.
Generally, for yeast to perform effectively during the fermentation process and obtain the product characteristics, the temperature
of the dough should be between 26 – 30
o
C (79 – 86
o
F).
EFEFCTS OF TEMPERATURE AND INGREDIENTS
Temperature
Ingredients
1. Salt Salt slows down the activity of yeast. It therefore controls and stabilizes the rate of fermentation within a dough when used
at the appropriate level. High levels of salt will retard or destroy the yeast. You should never allow yeast to come into direct
contact with salt.
2. Sugar Yeast works effectively in solutions that contain no more than 13% sugar. Doughs that contain sugar above this
level will experience a reduced rate of fermentation. Very high concentration of sugar will retard or destroy the yeast. You should
never allow yeast to come into direct contact with sugar.
3. Fats High levels of fat have a retarding effect upon the activity of yeast.
4. Spices High-levels of spices have a retarding effect upon the activity of yeast.
Note: It may be necessary to use the ferment and dough process to make a dough that contains a high level of sugar, fat and
spices. This is to encourage and promote the activity of yeast and to avoid the retarding effect that these ingredients have upon the
yeast.
SUITABILITY FOR THE PRODUCT
Yeast is used in the production of bread and fermented products, such as doughnuts.
ACCURATE WEIGHING
Yeast must be weighed accurately to ensure that:
♦ the recipe remains balanced
♦ a uniform product is obtained
8
9. ♦ the correct yield is obtained
♦ faults are prevented.
PREPARATION FOR USE
The most common method of adding yeast to a dough is to disperse it in the tempered water to ensure thorough dispersal. However,
yeast can be added in the dry state during the high speed mixing process.
SUITABLE STORAGE CONDITIONS
Yeast should be stored in the appropriate conditions below to prevent deterioration leading to wastage:
1. Temperature: 2 – 4
o
C (35 - 39
o
F).
2. Environment: dry conditions.
3. Time limit: up to 1 month
Use in strict stock rotation
Stacking
As yeast is a living organism, it has the ability to generate heat. To prevent the generation of heat leading to deterioration and
reduction in activity, boxes of yeast must be stacked with some space between the boxes. This will allow the cool air to circulate and
prevent a rise in temperature.
2.5 Milk Powder
SOURCE
Milk powder is produced by removing the moisture content from cow’s milk.
TYPES
Milk powder is available as:
1. Full cream.
2. Semi-skimmed
3. Skimmed
Table 2 Constituents of milk powder
Full cream % Constituents Skimmed %
27.50 fat 1.00
26.50 proteins 36.00
2.50 moisture 3.00
37.50 lactose 52.00
6.00 minerals 8.00
PROPERTIES
Milk powder has a beneficial effect on the following characteristics of a product:
♦ texture
♦ colour
♦ flavour
♦ eating qualities
♦ shelf life
♦ nutritional value
Crust colour on bread and fermented products
9
10. The sugar naturally present in milk powder is known as lactose. Yeast is unable to use lactose as a food, therefore, when milk powder
is includes in a dough, it remains present for the baking process. During the baking process, the heat caramelizes the lactose on the
surface of the product and a golden brown colour is obtained.
Note: Milk powder can be reconstituted to return to liquid milk.
SUITABILITY FOR THE PRODUCT
The versatility of milk powder to the baker is demonstrated by its use in the production of bread and fermented products, sweet pastry,
enriched pastes, powder aerated products and cakes and sponges.
FEATURES OF GOOD CONDITION
Milk powders are fit to use if:
♦ free from infestation
♦ free from physical contamination (for example, metal objects)
♦ free from excess moisture
♦ free from rancidity
♦ used within the recommended period
ACCURATE WEIGHING
Milk powder must be weighed accurately to ensure that:
♦ the recipe remains balanced
♦ a uniform product is obtained
♦ the correct yield is obtained
♦ faults are prevented.
PREPARATION FOR USE
Milk powder must be sieved prior to use:
♦ to remove lumps
♦ to remove any physical contamination (for example, metal objects)
♦ to blend with other dry ingredients.
Reconstitution of milk powders
Milk powder can be returned into liquid milk by adding water. The correct ratios are:
♦ full cream milk:
8 parts water to 1 part powder
1 litre (2 1b 3.75 oz) water to 125 g (4.5 oz) powder.
♦ skimmed milk:
10 parts water to 1 part powder
1 litre (2 1b 3.75 oz) water to 100 g (3.5 oz) powder.
Reconstitute as follows using warm water:
1. Add the milk powder to a small amount of the water content and mix to a paste.
2. Using a whisk, add the remaining water slowly. Whisk continuously until all of the water has been added.
3. Whisk thoroughly to ensure thoroughly dispersed.
4. Chill to reduce the temperature to 4
o
C (39
o
F) and treat as fresh milk.
Reconstitution should be done at least 1 hour before use.
SUITABLE STORAGE CONDITIONS
Milk powder is hygroscopic and should be stored in the appropriate conditions below to prevent the retention of moisture:
1. Temperature: 4 – 10
o
C (40 – 50
o
F).
2. Environment: dry, airtight conditions.
3. Time limit:
full cream – up to 2 months
skimmed – up to 6 months
10
11. 2.6 Dough conditioners
Dough conditioners contain a mixture of natural and chemical substances. These substances include:
♦ L-Cysteine a powerful chemical which modifies and relaxes gluten
♦ Soya – flour – can be used alone for its general improving qualities or as a carrier for other substances that are used in
very small quantities
♦ Ascorbic acid – an oxidizing agent that stabilizes the gas cells in a dough which results in a baked crumb with uniform
cell size.
♦ Fat – assists in the retention of gas within a dough which helps to achieve maximum volume in the baked product.
♦ Yeast foods – simple sugars such as dextrose can be included as food for the yeast to help it produce carbon dioxide
gas.
♦ Mould inhibitors – acids such as propionic acid and calcium propionate can be included to prevent premature
development of mould.
♦ Emulsifiers – produce a softer crumb and increase the shelf life
♦ Gypsum – keeps a dough conditioner free-flowing.
2.7 Malt
SOURCE
Malt flour and malt products are obtained from barley and wheat that have undergone a controlled process known as malting.
The malting process
This begins after the grains have been cleaned. Germination now takes place in an environment that has a controlled level of humidity
and temperature. During this period, the starch within the grain is converted into simple sugars. The germination process is halted
when the grains are subjected to heat during the dying stage of the process.
The malting process can take up to two weeks to complete.
After completion, the malted grains are ready to be processed into various malt products.
TYPES
The malt products that are available are:
1. Malt flour
2. Dried malt extract
3. Malt extract syrup
2.8 Fats and Oils
SOURCE
Fats and oils are obtained from the following sources:
♦ vegetables
♦ animals
♦ milk
♦ marine
TYPES
The most common types of fats and oils are:
♦ butter
♦ cake margarine
♦ shortening
♦ lard
♦ pastry margarine
♦ high ratio shortening
♦ vegetable oil
♦ emulsions
11
12. Example of constituents
Table 4 Sample constituents of fats and oils
Butter % Constituents Cake margarine %
82.00 fat 83.00
15.00 moisture 14.00
1.60 curd 1.50
1.40 minerals 1.50
PROPERTIES
Fats and oils possess the following properties in the production of bakery products:
1. Aeration The ability to incorporate air during the mixing process, which contributes to the aeration and final volume of a
product.
2. Shortening The ability to surround the insoluble gluten forming proteins of flour during the mixing process. Liquids
then have restricted access to the gluten which does not become fully developed; the result is a shortness to the eating
quality of the final product.
3. Laminating The ability to withstand the rolling and folding process of lamination. They allow layers of dough and fat
to be built up which helps to achieve the final volume of the product.
4. Emulsifying The ability to assist in the formation of a smooth, clear dough, paste or batter.
5. Frying The ability to withstand high temperatures without smoking and igniting during the cooking of a product.
6. Flavour the ability to contribute directly to the flavour of a product.
7. Eating quality A pleasing effect upon the general eating quality (for example, soft crumb).
9. keeping qualities he softening, emulsifying and enriching properties of fats and oils help to extend the shelf life of a
product.
See Table 5, for the properties of fats and oils.
Note: Emulsions are mixtures containing water and oil, and are used to grease baking tins and trays to ensure the easy release of
baked products.
2.8 Fruit
SOURCE
The many fruits used by the baker are grown from the following sources:
♦ tree (eg apples)
♦ vine (eg grapes)
♦ plant (eg strawberries)
♦ bush (eg blackberries)
After harvesting, the fruits are processed and are available in these forms:
♦ fresh
♦ tinned
♦ dried
♦ sugar preserved
♦ frozen
TYPES
The types of fruits in common use are:
1. Fresh apples, strawberries, pears, bananas, grapes, kiwi, raspberries and blackberries.
2. Tinned apple, pineapple, mandarin orange, peaches, cherries, raspberries, blackberries, apricots and pears.
3. Dried currants, sultanas, raisins and dates.
4. Sugar preserved cherries, pineapples, orange and lemon peel.
12
13. 5. Frozen strawberries, raspberries and blackberries.
PROPERTIES
Fruit will confer some of the following properties to bakery products:
♦ flavour
♦ colour
♦ texture
♦ moisture
♦ visual appeal
♦ variety
♦ eating qualities
♦ keeping qualities
♦ nutritional value.
SUITABILITY FOR THE PRODUCT
1 Fresh, tinned and frozen fruit: Most of the types of fruit listed in these categories are suitable to be used as follows:
<> in unbaked mixtures
<> in fillings
<> as a decorative material.
2. Dried fruit: The types of fruit listed in this category are suitable to be used as follows:
<> in unbaked mixtures
<> in fillings
3. Sugar preserved fruit: The types of fruit listed in this category are suitable to be used as follows:
<> in unbaked mixtures
<> as a decorative material
Fruits are used in the production of most categories of bakery products, with little exception.
FEATURES OF GOOD CONDITION
Fruits are fit to use if:
♦ free from decomposition
♦ free from infestation and moulds
♦ free from physical contamination (for example, metal objects)
♦ free from excess moisture
♦ used within the recommended period.
2.9 Egg
SOURCE
The egg used by the baker is obtained from chickens.
TYPES
The types of egg in common use are:
1. Shell egg.
2. Chilled liquid egg.
3. Frozen egg.
4. Frozen egg whites.
5. Dried egg white.
Note: Egg whites are known as albumen
Table 8 Constituents of whole egg, albumen and yolk
Constituents % Whole egg % Albumen % Yolk
Moisture 74 87 50
Protein 12.5 12.25 16
Fat 12 0.25 32
Minerals 1 0.5 1
13
14. Organic matter 0.5 nil 1
PROPERTIES
Egg possesses the following properties in the production of bakery products:
1. Moisturizng Egg contains 74% water and has the ability to moisturize its own weight in flour.
2. Aeration Whisked egg can incorporate air and increase in volume. It has the ability to aerate its own weight in flour. A stiff
foam is obtained when egg whites and sugar incorporate air during whisking (for example, meringues).
3. Structural Egg is distributed throughout the fabric of a mixture. When egg is subjected to heat during the baking process, it
expands, the proteins coagulate and the structure is established.
4. Emulsifying Egg yolk contains a natural emulsifying agent known as lecithin. The lecithin assists in the formation of a
smooth, clear mixture.
5. Nutritional value Egg contains a high level of protein and fat which contribute to the nutritional value of egg.
6. Flavouring Egg has its own characteristics flavour which is conferred to bakery products.
7. Colouring Egg confers a yellow colour to bakery products. When used alone, egg whites confer a white colour to bakery
products.
8. Glazing When egg is mixed with an appropriate quantity of milk, it can be used to glaze the top surface of many
bakery products.
9. Eating quality Egg confers lightness, moisture and flavour to the eating qualities of bakery products.
10. Keeping qualities The moisturizing, emulsifying, enriching and general softness properties of the egg will help to extend the
shelf life of a product.
SUITABILITY FOR THE PRODUCT
♦ Whole egg (whether shell, liquid or frozen) is used in the production of bread and fermented products, sweet pastries,
enriched pastes, powder aerated products, cakes and sponges.
♦ Frozen egg whites and reconstituted dried egg whites are used in the production of cakes, biscuits, almond goods,
meringues, and royal icing.
FEATURES OF GOOD CONDITION
Egg and egg whites are fit to use if:
♦ the smell is fresh
♦ the colour is normal
♦ free from physical contamination 9for example, metal objects)
♦ used within the recommended period.
ACCURATE WEIGHING
Egg and egg whites must be weighed accurately to ensure that:
♦ the recipe remains balanced
♦ a uniform product is obtained
♦ the correct yield is obtained
♦ faults are prevented
PREPARATION FOR USE
Defrosting
Prior to use, frozen egg and egg whites must be defrosted gently. Defrosting can be achieved by standing the containers in a room
overnight at a temperature of between 16 – 21
o
C (61 – 70
o
F).
Tempering
1. To incorporate egg into some mixtures (in particular, cake batters), it must be warmed to 21
o
C (70
o
F) to prevent the
batter from curding.
2. Some mixtures need to be cool (in particular, scone doughs) to prevent baking powder from working. The egg must
therefore be in a chilled condition, 4
o
C (39
o
F).
14
15. Vehicle for other ingredients
Ingredients that are used in small quantities can be mixed through the egg content prior to addition, in order to ensure thorough
dispersal. Some examples of these ingredients are:
♦ glycerine
♦ essences
♦ colours
♦ flavours
♦ compounds
Reconstitution of dried egg whites
Dried egg whites are returned to liquid form by adding water. The correct ratio of water to dried egg white is:
7 parts water to 1 part powder
1 litre (21b 3.5 oz) water to 143 g (5 oz) powder
Reconstitute as follows, using water:
1. Add the dried egg white to a small amount of the water content and mix to a paste
2. Using a whisk, add the remaining water slowly, whisk continuously until all the water has been added.
3. Whisk thoroughly to ensure through dispersal.
4. Chill to reduce the temperature to 4
o
C (39
o
F) and treat as fresh egg whites.
Reconstitution should be done at least 1 hour before use.
Improving whipping powder
The whipping powder of egg whites can be improved by using one of the following methods:
1. Allow to stand in the refrigerator to obtain a slight acidic nature.
2. Add a small amount of weak acid. The acids that are suitable are Citric, Acetic and Tartaric.
SUITABLE STORAGE CONDITIONS
Egg is prone to contamination by salmonella bacteria, therefore liquid egg, frozen egg, frozen egg whites and dried egg whites are
pasteurized by the supplier. Egg should be stored in the appropriate conditions in table 9 to prevent premature deterioration leading to
wastage.
Table 9 Suitable storage conditions for eggs
Type Temperature Conditions Time limit
Shell 4
o
C (39
o
F) Clean container 3 – 4 weeks
Liquid 4
o
C (39
o
F) Sealed container 2 – 3 days
Frozen -22
o
C (-7
o
F) Sealed container 6 – 12 months
Frozen egg whites -22
o
C (-7
o
F) Sealed container 6 – 12 months
Dried egg whites 4-10
o
C (39-50
o
F) Dry, airtight 2 – 3 months
2.10 Food Colours and Flavouring
Food colours
SOURCE
Food colours are obtained from natural and artificial sources, for example:
1. Natural:
<> yellow from egg yolk
<> red from insects known as cochineal
<> chocolate from the cocoa bean
2. Artificial: Water soluble preparations produced from chemicals
TYPES
A full range of food colours are available from lemon to black in liquid, paste and powder form.
15
16. Note: A colour can be combined with an appropriate flavour; this is known as a compound.
PROPERTIES
Food colours have a beneficial effect upon the following characteristics of a product:
♦ crumb colour
♦ crust colour
♦ overall appearance
SUITABILITY FOR THE PRODUCT
Food colours can be used in the production of fermented products, sweet pastries, enriched pastries, cakes and sponges, powder
aerated products and almond products.
FEATURES OF GOOD CONDITION
Food colours are fit to use if:
♦ free from fermentation and mould
♦ free from physical contamination (for example, metal objects)
♦ used within the recommended period.
ACCURATE WEIGHING
Food colours must be weighed accurately to ensure that:
♦ the correct shade is obtained
♦ a uniform product is obtained
♦ there is no unnecessary wastage of food colours and products.
PREPARATION FOR USE
Dough, paste and batter
To ensure food colours are thoroughly dispersed, they should be mixed through one of the other ingredients in the recipe, eg. Egg,
prior to addition to the dough, paste or batter.
Finishing materials
Food colours can be added directly to finishing materials such as fondant and buttercream.
SUITABLE STORAGE CONDITION
Food colours should be stored in the appropriate conditions below to prevent deterioration leading to wastage:
1 Temperature: 10 – 16
o
C (50 – 61
o
F).
2 Environment: dark, dry, airtight conditions.
3 Time limit: up to 12 months.
Food Flavourings
SOURCES
Food flavourings are obtained from natural and artificial sources, eg:
1. Natural:
<> fruit
<> plants
<> herbs
<> spices
2. Artificial: Organic acids are combined with alcohol to form esters that taste just like the real thing.
3. Nature identical: Produced from chemicals to obtain a flavouring which is chemically identical to the natural material
TYPES
A full range of food flavourings are available from vanilla to savoury and spicy in these forms:
16
17. 1. Liquid
2. Paste
3. Powder
Note: A flavour can be combined with an appropriate colour; this is known as a compound
PROPERTIES
Food flavourings have a beneficial effect upon the following characteristics of a product:
♦ flavour
♦ eating qualities
♦ colour
SUITABILITY FOR THE PRODUCT
Food flavourings can be used in the production of fermented products, sweet pastries, short pastries, enriched pastries, cakes and
sponges, powder aerated products, almond products and sandwiches.
FEATURES OF GOOD CONDITION
Food flavourings are fit to use if:
♦ free from fermentation and mould
♦ free from physical contamination (for example, metal objects)
♦ used within the recommended period
ACCURATE WEIGHING
Food flavourings must be weighed accurately to ensure that:
♦ a palatable taste is obtained
♦ a uniform product is obtained
♦ there is no unnecessary wastage of food flavourings and products.
PREPARATION FOR USE
Dough, paste and batter
To ensure food flavourings are thorough dispersed, they should be mixed through one of the other ingredients in the recipe, eg egg,
flour, etc, prior to addition to the dough, paste or batter.
Finishing materials
Food flavourings can be added directly to finishing materials such as fondant and buttercream
SUITABLE STORAGE CONDITIONS
Food flavourings should be stored in the appropriate conditions below to prevent deterioration leading to wastage:
1 Temperature: 10 – 16
o
C (50 – 61
o
F).
2 Environment: dark, dry, airtight conditions.
3 Time limit: up to 12 months.
CHEMISTRY OF CAKES AND DOUGHNUTS MAKING
3.0 Cakemaking Processes
3.1 CHARACTERISTICS OF CAKE
Most cakes will have some of the following characteristics
♦ a good volume and uniform shape
♦ an even crust colour
♦ a think crust
♦ a clean and bright crumb colour
♦ regular and evenly distributed cells to form a mellow crumb structure
♦ sufficient moisture to the crumb to make a cake enjoyable to the palate
♦ a fine flavour and aroma.
Categories of cake products
17
18. Cake products can be broadly divided into four categories
1. Plain cake – eg Genoese, Angel Cake.
2. Lightly fruited cake – eg Sultana Cake, Cherry Cake.
3. Heavily fruited cake – eg Dundee Cake, Wedding Cake.
4. Decorated cake – eg Fondant Dips, Bar Gateaux.
Cakes for occasions
Certain occasions and event throughout the year demand a particular type of decorated cake. Here are some examples:
♦ Birthday Cakes
♦ Wedding Cakes
♦ Novelty Cakes
♦ Anniversary Cakes
♦ Christening Cakes
♦ Valentine Cakes
♦ Mothers Day Cakes
♦ Christmas Cakes
♦ Simnel cakes for Easter
3.2 THE PROCESSES
Skill knowledge and judgement are required to produce cake successfully. A command of the most common mixing processes is
essential.
We shall consider two processes:
♦ the Sugar Barter Process
♦ the Blending Process
The aim of mixing
♦ to disperse and dissolve all ingredients
♦ to form an emulsion
♦ to incorporate air into the batter or sponge
Basic ingredients
The basic ingredients required to make cake products are:
♦ soft flour
♦ soft fat
♦ sugar
♦ egg
♦ baking powders
Chemistry of Baking Powders
Baking powders are mixtures of substances which produce carbon dioxide when water is added and they are heated. The carbon
dioxide gas causes baked goods to rise.
The most usual type of baking powder contained sodium bicarbonate and an acid ingredient. On the addition of water the acid reacts
with the bicarbonate, producing a salt, water and carbon dioxide.
NaHCO3 + HX NaX + H2O + CO2
Sodium acid salt water carbon
bicarbonate dioxide
One of the most usual acid ingredients is potassium hydrogen tartrate (cream of tartar). This is an acid salt of tartaric acid, since it still
retains some replaceable hydrogen.
Sodium Potassium Sodium Carbon
18
19. Bicarbonate + hydrogen potassium + Water + dioxide
tartrate
Other acid ingredients, which are used, include tartaric acid, acid calcium phosphate (ACP) and acid sodium pyrophosphate (ASP).
Tartaric acid, cream of tartar and ACP are used in quick-acting baking powders, in which most of the carbon dioxide is produced when
water is added. ASP is used in slow-acting baking powders, which produce most of their carbon dioxide during baking. Most
commercial baking powder contain both slow-and quick-acting ingredients. Hey also contain a filler, usually corn starch, which helps to
keep the ingredients dry and prevents them reacting with each other before baking.
The acid ingredient ma be supplied by a food. The best example of this is the use of sour milk, containing lactic acid, in the making of
soda bread. Vinegar or lemon juice may also be used to provide acids.
Bicarbonates or carbonates can be used on their own without an acid ingredient; they release carbon dioxide on heating. If sodium
bicarbonate is used alone, sodium carbonate, carbon dioxide and water are produced.
2NaHCO3 Na2CO3 + H2O + CO2
Sodium sodium water carbon
bicarbonate carbonate dioxide
Sodium carbonate is present in the baked product as an alkaline residue, which is yellow in colour and slightly bitter in taste. In a dark,
strongly flavoured product, such as gingerbread, this does not matter.
Ammonium bicarbonate and carbonate are used commercially in the production of some biscuits. They do not leave an alkaline
residue. Ammonia is released as a vapour during baking.
NH4HCO3 NH3 + H2O + CO2
Ammonium ammonia water carbon
bicarbonate dioxide
(NH4) 2CO3 NH3 + H2O + CO2
Ammonium ammonia water carbon
carbonate dioxide
Batter temperature
To ensure that a cake batter is a stable emulsion, the final batter temperature should 18 – 21
o
C (64 – 70
o
F). it is therefore necessary to
increase the temperature of the egg and other liquids to 21
o
C (70
o
F) before addition.
3.3 MIXING METHODS
This is an outline for each of the mixing methods used to make cake batters. A more detailed description of each method can be found
in the recipes for cakes and sponge products
SUGAR BATTER METHOD
1. Beat together the sugar and fat until light.
2. All the egg in five additions. Beat each addition in thoroughly.
3. Sieve together the dry ingredients, add to above and mix through until a smooth clear batter is obtained.
Note: Milk and fruit should be added when the batter is half clear.
BLENDING METHOD
1. Sieve together the dry ingredients. Add the fat and mix to a crumble or paste consistency.
2. Add the milk and mix until a paste is formed.
3. Add the egg slowly and mix until a smooth batter is obtained
4. Add fruit and mix through until thoroughly dispersed.
HIGH SPEED METHOD
Using a high speed mixing machine, place all of the ingredients into the mixing chamber and mix for 15 – 20 seconds. Fruits should be
added and mixed through during the final 5 seconds of the mixing time.
19
20. Points to consider when processing cakes
1. Prepare all ingredients correctly before addition.
2. Strictly adhere to the mixing speed and times.
3. Scrape down regularly to ensure a smooth, lump free batter is obtained
4. Once the flour has been added to the mix, do not overmix and toughen.
5. Large bowls of cake batter should be scraped down throughout the scaling process to prevent discoloration and streaks
occurring in the cake crumb of the final number of cakes scaled off.
6. Prepare tins correctly to ensure the product can be released without damage
7. Accurate scaling is essential to ensure the yield is obtained and a uniform product is produced.
Baking of Cakes
A general guide to the baking temperature of cake products is:
♦ 170
o
C (340
o
F) – Wedding Cake, Angel Cake
♦ 182
o
C (360
o
F) – Madeira Cake
♦ 190
o
C (374
o
F) – American Muffins
♦ 204
o
C (400
o
F) – Sponge Cakes
DURING THE BAKING PROCESS
During the baking of cake and sponge products, the heat will penetrate the batter. The heat causes the incorporated air and egg to
expand, and activates the moistened baking powder which then produces carbon dioxide gas. Together they steadily lift the product to
its full volume. The batter gelatinizes and coagulates, and the crust colour emerges as the sugar begins to caramelize until the product
is thoroughly baked. The baking process can take as short as time as 7 minutes to as long as 4½ hours. However, the final objective
is always the same: to produce a moist product with a pleasant flavour.
To achieve this objective, the appropriate baking temperature should be used and this will depend upon the following considerations.
♦ shape, size and depth
♦ density
♦ sugar content
♦ product characteristics
In conjunction with the appropriate baking temperature, a fully loaded oven can benefit the baking process. The humidity generated
from the products assist in obtaining a good shape and an even bake.
PROTECTION DURING BAKING
Large cakes such as Genoa Slab and Christmas Cake take a long time to bake and therefore protection from the heat. The protection
will ensure the interior is fully baked while a good even crust colour is obtained. The areas of the cake which require protection are the
base and sides. They should be protected as follows:
1. Base – Hardboard, cardboard or thick paper placed on the baking tray under the cake tin, hoop or slab frame.
2. Sides – Card or thick paper secured around the outside of the tin or hoop.
Note: Cake frames made from wood do not require any protection during the baking process.
Finally, great care must be taken to avoid disturbing cake products during the baking process, which could cause them to collapse.
Cooling
On withdrawal from the oven, cake and sponge products should be allowed to cool on the tray in the tin, hoop or frame until they can
handled without being damaged. Cakes and sponges which are to be wrapped or finished must be thoroughly cooled prior to
processing.
20
21. Final decoration
Cake products are decorated with suitable finishing materials to enhance their appearance, add flavour and improve the general eating
qualities. Finishing techniques range from the most simple to highly intricate designs. Nevertheless, the practical application of the
finish or design should be reproduced consistently to a good standard to maintain the quality and appeal of the product.
4. DOUGHNUTS
Doughnut is made from a dough of wheat flour, salt, yeast and other ingredients. Addition of water to the flour causes the wheat
proteins, glutenin and gladin to form gluten which is viscoelastic. Kneading develops a network of gluten in the dough.
Before being fried, the dough is left to rise. During this stage the dough increases in volume due to the production of carbon dioxide, a
result of the fermentation of sugars by the yeast present in the dough:
C6H12O6 2 C2H5OH + 2CO2
glucose ethanol carbon
dioxide
The gluten network traps the gas and during frying the gluten coagulates thus fixing the size and shape of the doughnut.
Mixing Method
1. Sieve together the flour, salt and dough conditioner.
2. Using a spiral or conventional mixer, add the shortening and rub through the dry ingredients on slow speed.
3. Disperse the yeast into tempered water, dissolve the sugar, then add to the above ingredients.
4. Using a spiral and conventional mixer, mix on slow speed for 2 minutes.
5. Check for extremes in consistency and adjust as necessary.
6. To complete the mixing method follow the appropriate mixing process.
<> spiral mixer – mix on fast speed for 6-8 minutes
<> conventional mixer – mix on speed 1 for 20 minutes or speed 2 for 10 minutes.
7. After the completion of the mixing method, the dough is ready to be scaled and processed.
Processing methods
1. Scale 24 at 50 g (1.75 oz) and mould around.
2. Rest for 8 – 10 minutes to allow the dough pieces to recover.
3. Now form one of the following shapes:
Ring Doughnut
i. Pin out the dough piece to a flat round shape, 1.25cm (0.5”) deep.
ii. Cut and remove the centre using a 2 cm (0.75”) diameter plain cutter.
Round Doughnut
Re-mould the dough piece into a ball shape.
Finger Doughnut
Roll the dough piece to a finger shape 10 cm
(4”) long
4. Place the dough pieces onto a warm, lightly-oiled perforated tray.
5. Prove at 38 – 40
o
C (100 – 104
o
F) in humid conditions for min.
6. Fry the doughnuts at 190
o
C (347
o
F) for 2 – 4 minutes.
7. After frying, roll the doughnuts into caster sugar immediately.
Note: Ring doughnuts can be served plain. It is common practice for round and finger doghnuts to be finished and decorated with
jam, curds, cream, custard, fruit and chocolate.
Chemistry of Frying
1. Behaviour of the Frying Oil
The following classes of compounds are produced from the oil during frying.
Volatiles: saturated and unsaturated aldehydes ketones, hydrocarbons, lactones, alcohols, acids and esters are produced
during frying from oxidative reactions involving the formation and decomposition of hydroperoxide.
Nonpolymetic polar compounds of moderate volatility eg hydroxyl – and epoxy – acid
21
22. Dimeric and polymeric acids and glycerides: Occur from thermal and oxidative free radical combinations. Polymerization
results in a substantial increase in frying oil viscosity.
Free fatty acid: Arise from the hydrolysis of triacylglycerols in the presence of heat and water.
These reactions cause the following physical and chemical changes: increase in viscosity and free fatty acid content,
development of a dark colour, decrease in iodine value, changes in refractive index, a decrease in surface tension and an
increase tendency of the oil to foam.
2. Behaviour of the Food During Frying
Food is involved in the following occurrences during frying:
Water is continuously released from the food into the hot oil. This produces a steam-distillation effect, sweeping volatile
oxidative products from the oil. The released moisture also agitates the oil and hastens hydrolysis, resulting in increased
amounts of free fatty acids. During frying, volatiles may develop in the food itself or from the interaction between the food
and the oil. Food absorbs varying amounts of oil from deep-fat fryers, resulting in the need for frequent or continuous
addition of fresh oil. The food itself releases some of its endogenous lipids into the fryer. The oxidative stability of the new
mixture may be different from that of the original frying fat. The presence of food causes the oil to darken at an accelerated
rate.
3. Chemical and Physical Changes
As described above, a variety of chemical and physical changes take place in both the oil and the food during the frying
process. It should be pointed out that these changes are not to be automatically construed as signs of undesirable or
harmful deteriorations. In fact, some of these changes are sought by the frying process to provide the sensory qualities
typical of fried food. On the other hand, extensive decomposition, resulting from lack of adequate control of the frying
operation, can be a potential source of damage not only to the sensory quality of the fried product but also to its nutritional
value.
The chemical and physical changes in the frying fat are influenced by a number of frying parameters. Obviously, the
compounds formed depend on the composition of both the oil and the food being fried. High temperature, long frying times,
and metal contaminants favour extensive decomposition of the oil. The design and type of the fryer (pan, deep-fat batch, or
deep-fat continuous) is also important. Oxidation of the oil will occur faster at large surface-volume ratios. Other factors of
concern are turnover rate of the oil, the heating pattern (continuous or intermittent), and whether antioxidants are present.
4. HEALTH ASPECTS
Degraded molecules and residues are responsible for the non-lethal toxic properties of frying oils. Polymers are non-
nutritive, and produce bowel urgency similar to the effect of non-absorbable fat replacers. Acrolein vapour arising from the
dehydration of glycerine residues is a severe environmental pollutant and irritant to fryer operators.
Oxidized fatty acids cause symptoms such as headache and gastric disturbances. Aldehydes and ketones formed from breakdown of
oxidized fatty acids are responsible for off-odours.
For these and the hazard control reasons, there are regulations and guidelines to control the amount of TPM (total polar materials),
which are the non triglycerides formed in frying oil. Some specific chemical markers of the oil degradation among the TPM, such as
free fatty acids, water emulsion titrables, peroxide and beta-aldehydes are frequently monitored to decide, in special situations, when to
discard oils from process lines.
5. GMPs
1. Choice of frying oil of good quality and consistent stability.
2. Use of properly designed equipment.
3. Selection of the lowest frying temperature consistent with producing a fried product of good quality.
4. Frequent filtering of the oil to remove food particles
5. Frequent shutdown and cleaning of equipment.
6. Replacement of oil as needed to maintain high quality.
7. Consideration of antioxidant use. In some cases the level of antioxidant decreases significantly after a short processing time.
8. Adequate training of personnel.
22
23. 9. Frequent testing of the oil throughout the frying process.
REFERENCES
BLUMENTHAL, M.M. (1997). The science and technology of frying, Food Technology International. pp 69 – 70.
CONNELLY, P. and PITTAM P. (1997). “Practical Bakery”. Hodder & Stoughton
GAMAN, P.M. and SHERRINGTON K.B (1977). “The Science of Food”, Pergamon Press, Oxford
NAWAR, W.W. ( ). Lipids, In Fenema, O.R. ed. “Ford Chemistry”, 2
nd
edn., Marcel Dekker Inc., New York.
PENFIELD, M.P. and CAMPBELL A.M. (1990). Experimental Food Science. 3
rd
edn. Academic Press, Inc. New York.
23