If you are looking for a company that can provide a wide selection of curtains and blinds Auckland, you have found your partner in Curtain Creations. Call us now and ask for Christmas and New Year special offers.
Orthodontic Pliers Orthodontic Instruments Distal end cutter, ligature cutter...Sajeel Anwar
The document describes Medical Design, a company that manufactures and exports dental implants and orthodontic instruments. It lists over 30 orthodontic instruments that Medical Design produces, including pliers, cutters, band removers, and more. Contact and ordering information is provided at the end.
I make this ppt for engineering students to help us the Hand tool understand about the Hand tool For better understanding we made about hand tools for engineering and fitter trainees. This ppt is on Basics of Mechanical Engineer's Hand Tool. Students and teachers understand basic handling tools and are most effective in style.
This document summarizes three main types of knitting needles: bearded needles, latch needles, and compound needles. It describes the key features and parts of each type. Bearded needles are the simplest and cheapest, consisting of a fixed metal frame. Latch needles are more complex and self-acting, using needle depth and reciprocation to control stitch formation. Compound needles have two independently controlled parts - an open hook and closing element - allowing for higher knitting speeds in warp machines.
The document discusses various methods for manufacturing gears and threads. It describes casting, metal forming, powder metallurgy, and metal removal as common methods for making gears. Metal forming techniques include roll forming, extrusion, stamping, and coining. Metal removal techniques involve gear cutting, shaping, planing, hobbing, and broaching. The document also outlines various threading manufacturing methods such as lathe cutting, chasing, die threading, tapping, milling, rolling, grinding, casting, and whirling.
gear and thread manufacturing,metal cutting,manufacturing processes,Productio...Prof.Mayur Modi
The document discusses various methods for manufacturing gears and threads. It describes casting, metal forming, powder metallurgy, and metal removal as common methods for making gears. Metal forming techniques include roll forming, extrusion, stamping, and coining. Metal removal techniques involve gear cutting, shaping, planing, hobbing, and broaching. The document also outlines various threading manufacturing methods such as lathe cutting, chasing, die threading, tapping, milling, rolling, grinding, casting, and whirling.
The document is a catalog introducing the Leatherman Leap, a multi-tool designed specifically for younger users. It has features to allow safer use without a knife blade initially, which can be added later. It also has safety locks and an ergonomic grip designed for training proper tool use. The catalog provides specifications on the tool's materials, available colors, included tools, and dimensions.
If you are looking for a company that can provide a wide selection of curtains and blinds Auckland, you have found your partner in Curtain Creations. Call us now and ask for Christmas and New Year special offers.
Orthodontic Pliers Orthodontic Instruments Distal end cutter, ligature cutter...Sajeel Anwar
The document describes Medical Design, a company that manufactures and exports dental implants and orthodontic instruments. It lists over 30 orthodontic instruments that Medical Design produces, including pliers, cutters, band removers, and more. Contact and ordering information is provided at the end.
I make this ppt for engineering students to help us the Hand tool understand about the Hand tool For better understanding we made about hand tools for engineering and fitter trainees. This ppt is on Basics of Mechanical Engineer's Hand Tool. Students and teachers understand basic handling tools and are most effective in style.
This document summarizes three main types of knitting needles: bearded needles, latch needles, and compound needles. It describes the key features and parts of each type. Bearded needles are the simplest and cheapest, consisting of a fixed metal frame. Latch needles are more complex and self-acting, using needle depth and reciprocation to control stitch formation. Compound needles have two independently controlled parts - an open hook and closing element - allowing for higher knitting speeds in warp machines.
The document discusses various methods for manufacturing gears and threads. It describes casting, metal forming, powder metallurgy, and metal removal as common methods for making gears. Metal forming techniques include roll forming, extrusion, stamping, and coining. Metal removal techniques involve gear cutting, shaping, planing, hobbing, and broaching. The document also outlines various threading manufacturing methods such as lathe cutting, chasing, die threading, tapping, milling, rolling, grinding, casting, and whirling.
gear and thread manufacturing,metal cutting,manufacturing processes,Productio...Prof.Mayur Modi
The document discusses various methods for manufacturing gears and threads. It describes casting, metal forming, powder metallurgy, and metal removal as common methods for making gears. Metal forming techniques include roll forming, extrusion, stamping, and coining. Metal removal techniques involve gear cutting, shaping, planing, hobbing, and broaching. The document also outlines various threading manufacturing methods such as lathe cutting, chasing, die threading, tapping, milling, rolling, grinding, casting, and whirling.
The document is a catalog introducing the Leatherman Leap, a multi-tool designed specifically for younger users. It has features to allow safer use without a knife blade initially, which can be added later. It also has safety locks and an ergonomic grip designed for training proper tool use. The catalog provides specifications on the tool's materials, available colors, included tools, and dimensions.
This document discusses three main types of knitting needles: bearded needles, latch needles, and compound needles. Bearded needles are the simplest and cheapest type, made from a single piece of metal with a fixed hook. Latch needles are more complex but self-acting, with a movable latch that opens and closes to form loops. Compound needles have a separate sliding element that works with an open hook to form loops without straining the yarn. The document provides details on the features, parts, advantages, and limitations of each needle type.
This document describes various types of wire bending pliers used in orthodontics. It discusses pliers for bending light wires like standard light wire pliers and Jaraback light wire pliers. It also covers pliers for specific functions like Young's loop bending pliers, Adams pliers for fabricating Adams clasps, angle wire bending pliers, contouring pliers for shaping canines and arches, and turret pliers for bending archwires with different torque specifications. Loop forming pliers are also discussed, including Nance loop forming pliers and Tweed loop forming pliers.
The document summarizes different types of dental instruments used in dentistry. It describes cutting instruments like chisels, hatchets and scalers and non-cutting instruments like mirrors, probes and tweezers. It also discusses various parts of instruments like handles, shanks and blades. The document provides details on different types of chisels, excavators and other instruments along with their functions. It concludes with discussing grips used for holding instruments.
This document discusses rotary instruments used in operative dentistry. It begins by introducing rotary instruments which include handpieces and cutting burs. It then describes different types of handpieces and their uses. The document outlines speed ranges for rotary instruments and discusses factors that influence the efficiency of cutting burs such as design, shape, material. It also summarizes diamond abrasive instruments and other abrasives used for shaping, finishing and polishing restorations. In summary, the document provides an overview of rotary instruments and burs used in restorative dentistry and factors affecting their cutting efficiency.
You find here basic knowledge about Ring and Ring Traveller of ring frame machine.This also help you to understand the role of ring and traveller in ring spinning.
This document provides an overview of various hand tools that may be encountered in a workshop. It describes different types of striking tools like hammers, mallets and sledges and their proper uses. Turning tools such as wrenches, pliers and screwdrivers are also outlined. Other tool categories summarized include bladed woodworking tools, saws, abrasives, measuring tools and fasteners. The document stresses the importance of using tools as intended and keeping them well maintained.
Centre lathe, constructional features, specification, operations – taper turning methods, thread cutting methods, special attachments, machining time and power estimation. Capstan and turret lathes- tool layout – automatic lathes: semi automatic – single spindle : Swiss type, automatic screw type – multi spindle:
Centre lathe, constructional features, various operations and specifications, taper turning methods, thread cutting methods, special attachments, machining time and power estimation. Capstan and turret lathes – Automatic lathe: single spindle, swiss type, screw type, multi spindle - Turret Indexing mechanism - Bar feed mechanism
This document discusses the design and function of surgical screws. It defines what a screw is, describes the different types of screws including cortex screws and cancellous bone screws. It explains how screws work through turning rotational forces into linear motion. The key functions of screws are compression, both between a plate and bone and between two bone fragments. The lag screw technique provides interfragmentary compression and absolute stability by allowing the screw to glide through the near cortex while threading into the far cortex. Countersinking creates a seat for the screw head to maximize contact and minimize stress. Different screw functions include lag screws, compression screws, position screws, and more.
The document discusses common tools used in CNC milling, including end mills, face mills, drills, taps, and reamers. It describes the different types of each tool as well as factors to consider like material, coatings, flutes, and holders. End mills are the most versatile cutting tools and come in various styles for different milling applications. Tool coatings can increase hardness and wear resistance for better performance. Proper tool holders are also important for secure and accurate mounting of cutters.
The document identifies and describes common electrical tools needed for installing electrical wiring, including:
- Screwdrivers (standard, Philips, stubby, Allen), hammers (claw, mallet, ballpeen), and pliers (combination, side cutting, long nose) for fastening screws and nuts or holding/bending wires.
- Other tools are wire strippers for removing insulation from wires, electrician's knives for stripping high voltage cables, portable electric drills for making holes, and hacksaws for cutting metal conduit and armored cable.
- These tools enable electricians to systematically complete wiring installation tasks by hand that could not otherwise be accomplished without assistance.
Harvey Tool manufactures several types of thread milling cutters for internal and external threading. Their single form cutters can machine any pitch thread in hardened steels up to 68Rc. Their multi-form cutters are designed for maximum chip ejection, deep threading applications, cutting National Pipe Taper threads, UN threads, and metric threads. The cutters are available in various coatings and styles to machine a wide range of thread types and sizes in various materials.
This document provides information on various types of expansion screws, including standard, mini, medium, and maxi sizes. The screws are made of stainless steel or titanium and are used for transverse expansion and tooth movement in the upper and lower jaws. They have cone-shaped or wide screw holders, skeleton designs, and built-in stops. The document lists the indications, expansions, references, and quantities available for each type of screw.
This document provides information about common electrical tools and devices, including various types of screwdrivers for different screw heads, hammers for driving or pulling out nails, pliers for gripping and cutting wires, knives for stripping insulation, drills for making holes, hacksaws for cutting metal conduit, soldering irons for joining metals, and multimeters for measuring voltage, resistance and current. Screwdrivers come in standard, Philips, stubby and Allen styles. Hammers include claw hammers, ballpeen hammers and mallets. Pliers include combination pliers, side cutters, long nose pliers and wire strippers.
The document discusses basic tools and equipment used for repair and troubleshooting. It defines tools and equipment, and classifies them into types such as driving tools, soldering tools, splicing tools, boring tools, cutting tools, and auxiliary tools. Specific tools are described within each type. The document also discusses proper care and maintenance of tools to avoid common faults, such as overtightening screws, using tools improperly, or failing to clean tools. A quiz is provided to test understanding.
This document provides an overview of the special products and custom measurement solutions offered by Bowers Metrology, including 3-point and 2-point heads for measuring grooves, threads, splines, spherical diameters, and other complex geometries. It describes heads for various applications such as deep hole inspection up to 15 meters, large diameters up to 18.45 inches, cannon grooves, tin can internal diameters, and more. Specifications and examples are given for many of the solutions.
The document provides information about tools available for purchase from a hardware store or warehouse. It lists over 67,000 items under categories such as routers, sanders, grinders, planers, drills, saws, and more. It describes the features of sample tools in each category and provides the stock keeping unit number and price for each. The document encourages customers to shop in-store, online, or call to order if an item is needed but not in stock in the store.
This document summarizes different types of endodontic instruments used in root canal treatment. It describes broaches, K-files, Hedstrom files and Gates-Glidden drills which are used for cleaning and shaping the root canal. It also discusses nickel-titanium rotary instruments, their manufacturing processes, surface properties, use with different systems like ProTaper Universal and factors that can cause instrument fracture during use.
Think Outside the AMS - Getter & Zimek.pdfNovi AMS
Member expectations continue to rise while association staff time is stretched thin. Join us for an interactive session exploring how to automate your digital ecosystem so that staff can deliver more member value in less time.
No matter how hard an AMS tries, it can’t be all things to all people. That’s ok. With the explosion of cloud technology, there have never been more options for organizations to streamline their operations while enhancing the member experience. The ASAE tech community calls this the “best in class” approach - finding software that fits your needs and integrating it in a seamless way with your AMS.
This session isn’t just for the techies… it’s designed to empower anyone who is thinking that “there must be a better way.”
Building Member Value in a Post Pandemic WorldNovi AMS
Pete Zimek, CEO of Novi AMS held a deep dive into how the pandemic has affected our organizations… and how associations are emerging from the pandemic to serve members in smarter, leaner, and more mission-focused ways. We started with an examination of membership trends and finished with a group discussion of the paradigm shifts needed to create the future.
More Related Content
Similar to Building a Best-in-Class Digital Ecosystem
This document discusses three main types of knitting needles: bearded needles, latch needles, and compound needles. Bearded needles are the simplest and cheapest type, made from a single piece of metal with a fixed hook. Latch needles are more complex but self-acting, with a movable latch that opens and closes to form loops. Compound needles have a separate sliding element that works with an open hook to form loops without straining the yarn. The document provides details on the features, parts, advantages, and limitations of each needle type.
This document describes various types of wire bending pliers used in orthodontics. It discusses pliers for bending light wires like standard light wire pliers and Jaraback light wire pliers. It also covers pliers for specific functions like Young's loop bending pliers, Adams pliers for fabricating Adams clasps, angle wire bending pliers, contouring pliers for shaping canines and arches, and turret pliers for bending archwires with different torque specifications. Loop forming pliers are also discussed, including Nance loop forming pliers and Tweed loop forming pliers.
The document summarizes different types of dental instruments used in dentistry. It describes cutting instruments like chisels, hatchets and scalers and non-cutting instruments like mirrors, probes and tweezers. It also discusses various parts of instruments like handles, shanks and blades. The document provides details on different types of chisels, excavators and other instruments along with their functions. It concludes with discussing grips used for holding instruments.
This document discusses rotary instruments used in operative dentistry. It begins by introducing rotary instruments which include handpieces and cutting burs. It then describes different types of handpieces and their uses. The document outlines speed ranges for rotary instruments and discusses factors that influence the efficiency of cutting burs such as design, shape, material. It also summarizes diamond abrasive instruments and other abrasives used for shaping, finishing and polishing restorations. In summary, the document provides an overview of rotary instruments and burs used in restorative dentistry and factors affecting their cutting efficiency.
You find here basic knowledge about Ring and Ring Traveller of ring frame machine.This also help you to understand the role of ring and traveller in ring spinning.
This document provides an overview of various hand tools that may be encountered in a workshop. It describes different types of striking tools like hammers, mallets and sledges and their proper uses. Turning tools such as wrenches, pliers and screwdrivers are also outlined. Other tool categories summarized include bladed woodworking tools, saws, abrasives, measuring tools and fasteners. The document stresses the importance of using tools as intended and keeping them well maintained.
Centre lathe, constructional features, specification, operations – taper turning methods, thread cutting methods, special attachments, machining time and power estimation. Capstan and turret lathes- tool layout – automatic lathes: semi automatic – single spindle : Swiss type, automatic screw type – multi spindle:
Centre lathe, constructional features, various operations and specifications, taper turning methods, thread cutting methods, special attachments, machining time and power estimation. Capstan and turret lathes – Automatic lathe: single spindle, swiss type, screw type, multi spindle - Turret Indexing mechanism - Bar feed mechanism
This document discusses the design and function of surgical screws. It defines what a screw is, describes the different types of screws including cortex screws and cancellous bone screws. It explains how screws work through turning rotational forces into linear motion. The key functions of screws are compression, both between a plate and bone and between two bone fragments. The lag screw technique provides interfragmentary compression and absolute stability by allowing the screw to glide through the near cortex while threading into the far cortex. Countersinking creates a seat for the screw head to maximize contact and minimize stress. Different screw functions include lag screws, compression screws, position screws, and more.
The document discusses common tools used in CNC milling, including end mills, face mills, drills, taps, and reamers. It describes the different types of each tool as well as factors to consider like material, coatings, flutes, and holders. End mills are the most versatile cutting tools and come in various styles for different milling applications. Tool coatings can increase hardness and wear resistance for better performance. Proper tool holders are also important for secure and accurate mounting of cutters.
The document identifies and describes common electrical tools needed for installing electrical wiring, including:
- Screwdrivers (standard, Philips, stubby, Allen), hammers (claw, mallet, ballpeen), and pliers (combination, side cutting, long nose) for fastening screws and nuts or holding/bending wires.
- Other tools are wire strippers for removing insulation from wires, electrician's knives for stripping high voltage cables, portable electric drills for making holes, and hacksaws for cutting metal conduit and armored cable.
- These tools enable electricians to systematically complete wiring installation tasks by hand that could not otherwise be accomplished without assistance.
Harvey Tool manufactures several types of thread milling cutters for internal and external threading. Their single form cutters can machine any pitch thread in hardened steels up to 68Rc. Their multi-form cutters are designed for maximum chip ejection, deep threading applications, cutting National Pipe Taper threads, UN threads, and metric threads. The cutters are available in various coatings and styles to machine a wide range of thread types and sizes in various materials.
This document provides information on various types of expansion screws, including standard, mini, medium, and maxi sizes. The screws are made of stainless steel or titanium and are used for transverse expansion and tooth movement in the upper and lower jaws. They have cone-shaped or wide screw holders, skeleton designs, and built-in stops. The document lists the indications, expansions, references, and quantities available for each type of screw.
This document provides information about common electrical tools and devices, including various types of screwdrivers for different screw heads, hammers for driving or pulling out nails, pliers for gripping and cutting wires, knives for stripping insulation, drills for making holes, hacksaws for cutting metal conduit, soldering irons for joining metals, and multimeters for measuring voltage, resistance and current. Screwdrivers come in standard, Philips, stubby and Allen styles. Hammers include claw hammers, ballpeen hammers and mallets. Pliers include combination pliers, side cutters, long nose pliers and wire strippers.
The document discusses basic tools and equipment used for repair and troubleshooting. It defines tools and equipment, and classifies them into types such as driving tools, soldering tools, splicing tools, boring tools, cutting tools, and auxiliary tools. Specific tools are described within each type. The document also discusses proper care and maintenance of tools to avoid common faults, such as overtightening screws, using tools improperly, or failing to clean tools. A quiz is provided to test understanding.
This document provides an overview of the special products and custom measurement solutions offered by Bowers Metrology, including 3-point and 2-point heads for measuring grooves, threads, splines, spherical diameters, and other complex geometries. It describes heads for various applications such as deep hole inspection up to 15 meters, large diameters up to 18.45 inches, cannon grooves, tin can internal diameters, and more. Specifications and examples are given for many of the solutions.
The document provides information about tools available for purchase from a hardware store or warehouse. It lists over 67,000 items under categories such as routers, sanders, grinders, planers, drills, saws, and more. It describes the features of sample tools in each category and provides the stock keeping unit number and price for each. The document encourages customers to shop in-store, online, or call to order if an item is needed but not in stock in the store.
This document summarizes different types of endodontic instruments used in root canal treatment. It describes broaches, K-files, Hedstrom files and Gates-Glidden drills which are used for cleaning and shaping the root canal. It also discusses nickel-titanium rotary instruments, their manufacturing processes, surface properties, use with different systems like ProTaper Universal and factors that can cause instrument fracture during use.
Similar to Building a Best-in-Class Digital Ecosystem (20)
Think Outside the AMS - Getter & Zimek.pdfNovi AMS
Member expectations continue to rise while association staff time is stretched thin. Join us for an interactive session exploring how to automate your digital ecosystem so that staff can deliver more member value in less time.
No matter how hard an AMS tries, it can’t be all things to all people. That’s ok. With the explosion of cloud technology, there have never been more options for organizations to streamline their operations while enhancing the member experience. The ASAE tech community calls this the “best in class” approach - finding software that fits your needs and integrating it in a seamless way with your AMS.
This session isn’t just for the techies… it’s designed to empower anyone who is thinking that “there must be a better way.”
Building Member Value in a Post Pandemic WorldNovi AMS
Pete Zimek, CEO of Novi AMS held a deep dive into how the pandemic has affected our organizations… and how associations are emerging from the pandemic to serve members in smarter, leaner, and more mission-focused ways. We started with an examination of membership trends and finished with a group discussion of the paradigm shifts needed to create the future.
Remote Work: How to Create Happier Employees Who Get More DoneNovi AMS
Working remotely can be an amazing opportunity for organizations and their employees. However, working at home isn't for everyone. Pete Zimek, CEO of Novi AMS, has been working remotely for over two decades, and he shared his thoughts with the Florida Society of Association Executives at their 2019 Education Conference.
Tech Tools for Associations that Make You Immediately More ProductiveNovi AMS
The document discusses tech tools that can immediately improve productivity for organizations. It recommends using cloud-based services for accounting software, Google Analytics, email communications, credit card processing, membership databases, and surveys. Using these tools provides a single source of truth and can improve internal productivity in areas like scheduling. The tools allow organizations to begin improving productivity now without facing barriers like lack of resources or knowledge.
QuickBooks Desktop: Going Out of Style Like VHS TapesNovi AMS
The document summarizes Intuit's reasons for moving accounting software from QuickBooks Desktop to QuickBooks Online. The three main forcing functions that left Intuit no choice are technical debt in the outdated desktop platform, an unsustainable business model for desktop, and changing consumer expectations around cloud and mobile access. While some features are still only available on desktop like job costing and inventory, the benefits of QuickBooks Online include automatic updates, mobile access, third party integration, and a more viable financial model for Intuit. The document provides tips for a successful transition such as backing up desktop data, verifying the conversion, and understanding new Online features.
Remote Work: How to Create Happier Employees Who Get More DoneNovi AMS
Pete Zimek, CEO of Novi AMS, led a roundtable discussion for the Florida Society of Association Executives on remote work. We discussed reasons to work remotely, the digital infrastructure needed to create a successful remote work environment, best practices for managing remote teams, and ways to lead staff when they're not in person. Presented May 9, 2019.
How to Get CNIC Information System with Paksim Ga.pptxdanishmna97
Pakdata Cf is a groundbreaking system designed to streamline and facilitate access to CNIC information. This innovative platform leverages advanced technology to provide users with efficient and secure access to their CNIC details.
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdfMalak Abu Hammad
Discover how MongoDB Atlas and vector search technology can revolutionize your application's search capabilities. This comprehensive presentation covers:
* What is Vector Search?
* Importance and benefits of vector search
* Practical use cases across various industries
* Step-by-step implementation guide
* Live demos with code snippets
* Enhancing LLM capabilities with vector search
* Best practices and optimization strategies
Perfect for developers, AI enthusiasts, and tech leaders. Learn how to leverage MongoDB Atlas to deliver highly relevant, context-aware search results, transforming your data retrieval process. Stay ahead in tech innovation and maximize the potential of your applications.
#MongoDB #VectorSearch #AI #SemanticSearch #TechInnovation #DataScience #LLM #MachineLearning #SearchTechnology
Threats to mobile devices are more prevalent and increasing in scope and complexity. Users of mobile devices desire to take full advantage of the features
available on those devices, but many of the features provide convenience and capability but sacrifice security. This best practices guide outlines steps the users can take to better protect personal devices and information.
TrustArc Webinar - 2024 Global Privacy SurveyTrustArc
How does your privacy program stack up against your peers? What challenges are privacy teams tackling and prioritizing in 2024?
In the fifth annual Global Privacy Benchmarks Survey, we asked over 1,800 global privacy professionals and business executives to share their perspectives on the current state of privacy inside and outside of their organizations. This year’s report focused on emerging areas of importance for privacy and compliance professionals, including considerations and implications of Artificial Intelligence (AI) technologies, building brand trust, and different approaches for achieving higher privacy competence scores.
See how organizational priorities and strategic approaches to data security and privacy are evolving around the globe.
This webinar will review:
- The top 10 privacy insights from the fifth annual Global Privacy Benchmarks Survey
- The top challenges for privacy leaders, practitioners, and organizations in 2024
- Key themes to consider in developing and maintaining your privacy program
Alt. GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using ...James Anderson
Effective Application Security in Software Delivery lifecycle using Deployment Firewall and DBOM
The modern software delivery process (or the CI/CD process) includes many tools, distributed teams, open-source code, and cloud platforms. Constant focus on speed to release software to market, along with the traditional slow and manual security checks has caused gaps in continuous security as an important piece in the software supply chain. Today organizations feel more susceptible to external and internal cyber threats due to the vast attack surface in their applications supply chain and the lack of end-to-end governance and risk management.
The software team must secure its software delivery process to avoid vulnerability and security breaches. This needs to be achieved with existing tool chains and without extensive rework of the delivery processes. This talk will present strategies and techniques for providing visibility into the true risk of the existing vulnerabilities, preventing the introduction of security issues in the software, resolving vulnerabilities in production environments quickly, and capturing the deployment bill of materials (DBOM).
Speakers:
Bob Boule
Robert Boule is a technology enthusiast with PASSION for technology and making things work along with a knack for helping others understand how things work. He comes with around 20 years of solution engineering experience in application security, software continuous delivery, and SaaS platforms. He is known for his dynamic presentations in CI/CD and application security integrated in software delivery lifecycle.
Gopinath Rebala
Gopinath Rebala is the CTO of OpsMx, where he has overall responsibility for the machine learning and data processing architectures for Secure Software Delivery. Gopi also has a strong connection with our customers, leading design and architecture for strategic implementations. Gopi is a frequent speaker and well-known leader in continuous delivery and integrating security into software delivery.
In his public lecture, Christian Timmerer provides insights into the fascinating history of video streaming, starting from its humble beginnings before YouTube to the groundbreaking technologies that now dominate platforms like Netflix and ORF ON. Timmerer also presents provocative contributions of his own that have significantly influenced the industry. He concludes by looking at future challenges and invites the audience to join in a discussion.
Dr. Sean Tan, Head of Data Science, Changi Airport Group
Discover how Changi Airport Group (CAG) leverages graph technologies and generative AI to revolutionize their search capabilities. This session delves into the unique search needs of CAG’s diverse passengers and customers, showcasing how graph data structures enhance the accuracy and relevance of AI-generated search results, mitigating the risk of “hallucinations” and improving the overall customer journey.
GraphSummit Singapore | The Future of Agility: Supercharging Digital Transfor...Neo4j
Leonard Jayamohan, Partner & Generative AI Lead, Deloitte
This keynote will reveal how Deloitte leverages Neo4j’s graph power for groundbreaking digital twin solutions, achieving a staggering 100x performance boost. Discover the essential role knowledge graphs play in successful generative AI implementations. Plus, get an exclusive look at an innovative Neo4j + Generative AI solution Deloitte is developing in-house.
UiPath Test Automation using UiPath Test Suite series, part 6DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 6. In this session, we will cover Test Automation with generative AI and Open AI.
UiPath Test Automation with generative AI and Open AI webinar offers an in-depth exploration of leveraging cutting-edge technologies for test automation within the UiPath platform. Attendees will delve into the integration of generative AI, a test automation solution, with Open AI advanced natural language processing capabilities.
Throughout the session, participants will discover how this synergy empowers testers to automate repetitive tasks, enhance testing accuracy, and expedite the software testing life cycle. Topics covered include the seamless integration process, practical use cases, and the benefits of harnessing AI-driven automation for UiPath testing initiatives. By attending this webinar, testers, and automation professionals can gain valuable insights into harnessing the power of AI to optimize their test automation workflows within the UiPath ecosystem, ultimately driving efficiency and quality in software development processes.
What will you get from this session?
1. Insights into integrating generative AI.
2. Understanding how this integration enhances test automation within the UiPath platform
3. Practical demonstrations
4. Exploration of real-world use cases illustrating the benefits of AI-driven test automation for UiPath
Topics covered:
What is generative AI
Test Automation with generative AI and Open AI.
UiPath integration with generative AI
Speaker:
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
A tale of scale & speed: How the US Navy is enabling software delivery from l...sonjaschweigert1
Rapid and secure feature delivery is a goal across every application team and every branch of the DoD. The Navy’s DevSecOps platform, Party Barge, has achieved:
- Reduction in onboarding time from 5 weeks to 1 day
- Improved developer experience and productivity through actionable findings and reduction of false positives
- Maintenance of superior security standards and inherent policy enforcement with Authorization to Operate (ATO)
Development teams can ship efficiently and ensure applications are cyber ready for Navy Authorizing Officials (AOs). In this webinar, Sigma Defense and Anchore will give attendees a look behind the scenes and demo secure pipeline automation and security artifacts that speed up application ATO and time to production.
We will cover:
- How to remove silos in DevSecOps
- How to build efficient development pipeline roles and component templates
- How to deliver security artifacts that matter for ATO’s (SBOMs, vulnerability reports, and policy evidence)
- How to streamline operations with automated policy checks on container images
GraphSummit Singapore | The Art of the Possible with Graph - Q2 2024Neo4j
Neha Bajwa, Vice President of Product Marketing, Neo4j
Join us as we explore breakthrough innovations enabled by interconnected data and AI. Discover firsthand how organizations use relationships in data to uncover contextual insights and solve our most pressing challenges – from optimizing supply chains, detecting fraud, and improving customer experiences to accelerating drug discoveries.
“An Outlook of the Ongoing and Future Relationship between Blockchain Technologies and Process-aware Information Systems.” Invited talk at the joint workshop on Blockchain for Information Systems (BC4IS) and Blockchain for Trusted Data Sharing (B4TDS), co-located with with the 36th International Conference on Advanced Information Systems Engineering (CAiSE), 3 June 2024, Limassol, Cyprus.
Generative AI Deep Dive: Advancing from Proof of Concept to ProductionAggregage
Join Maher Hanafi, VP of Engineering at Betterworks, in this new session where he'll share a practical framework to transform Gen AI prototypes into impactful products! He'll delve into the complexities of data collection and management, model selection and optimization, and ensuring security, scalability, and responsible use.
Unlocking Productivity: Leveraging the Potential of Copilot in Microsoft 365, a presentation by Christoforos Vlachos, Senior Solutions Manager – Modern Workplace, Uni Systems
8. • 2.5" 60% Serrated locking blade
• Nail file, nail cleaner
• Corkscrew
• Adjustable pliers with wire crimper and cutter
• Removable screwdriver bit adapter
• 2.5" Blade for Official World Scout Knife
• Spring-loaded, locking needle-nose pliers with wire
cutter
• Removable screwdriver bit holder
• Phillips head screwdriver bit 0
• Phillips head screwdriver bit 1
• Phillips head screwdriver bit 2
• Flat head screwdriver bit 0.5mm x 3.5mm
• Flat head screwdriver bit 0.6mm x 4.0mm
• Flat head screwdriver bit 1.0mm x 6.5mm
• Magnetized recessed bit holder
• Double-cut wood saw with ruler (inch & cm)
• Bike chain rivet setter, removable 5mm allen
wrench, screwdriver for slotted and philips head
screws
• Removable tool for adjusting bike spokes, 10mm
hexagonal key for nuts
• Removable 4mm curved allen wrench with philips
head screwdriver
• Removable 10mm hexagonal key
• Patented locking philips head screwdriver
• Universal wrench
• 2.4" Springless scissors with serrated, self-
sharpening design
• 1.65" Clip point utility blade
• Philips head screwdriver
• 2.5" Clip point blade
• Golf club face cleaner
• 2.4" Round tip blade
• Patented locking screwdriver, cap lifter, can opener
• Golf shoe spike wrench
• Golf divot repair tool
• 4mm allen wrench
• 2.5" blade
• Fine metal file with precision screwdriver
• Double-cut wood saw
• Cupped cigar cutter with double-honed edges
• 12/20-Guage choke tube tool
• Watch caseback opening tool
• Snap shackle
• Mineral crystal magnifier with precision screwdriver
• Compass, straight edge, ruler (in./cm)
• Telescopic pointer
• Fish scaler, hook disgorger, line guide
• Shortix laboratory key
• Micro tool holder
• Micro tool adapter
• Micro scraper - straight
• Micro scraper - curved
• Laser pointer with 300 ft. range
• Metal saw, metal file
• Flashlight
• Micro tool holder
• Philips head screwdriver 1.5mm
• Screwdriver 1.2mm
• Screwdriver .8mm
• Fine fork for watch spring bars
• Reamer
• Pin punch 1.2mm
• Pin punch .8mm
• Round needle file
• Removable tool holder with expandable receptacle
• Removable tool holder
• Special self-centering screwdriver for gunsights
• Flat philips head screwdriver
• Chisel-point reamer
• Mineral crystal magnifier, fork for watch spring bars,
small ruler
• Extension tool
• Spring-loaded, locking flat nose-nose pliers with wire
cutter
• Removable screwdriver bit holder
• Phillips head screwdriver bit 0
• Phillips head screwdriver bit 1
• Phillips head screwdriver bit 2
• Flat head screwdriver bit 0.5mm x 3.5mm
• Flat head screwdriver bit 0.6mm x 4.0mm
• Flat head screwdriver bit 1.0mm x 6.5mm
• Magnetized recessed bit holder
• Tire tread gauge
• Fiber optic tool holder
• Can opener
• Patented locking screwdriver, cap lifter, wire stripper
• Reamer/awl
• Toothpick
• Tweezers
23. Why Build a Digital Ecosystem?
1. Use the right tool for the job
2. Automate manual work
3. Deliver member benefits
faster
4. Live up to modern
expectations
-----
You said that editing your website was cumbersome and you spend extra time each week doing ___. So did the association staff that helped us develop novi. They told us that it needed to be really easy and simple to use.
-----
You said that editing your website was cumbersome and you spend extra time each week doing ___. So did the association staff that helped us develop novi. They told us that it needed to be really easy and simple to use.
-----
You said that editing your website was cumbersome and you spend extra time each week doing ___. So did the association staff that helped us develop novi. They told us that it needed to be really easy and simple to use.
-----
You said that editing your website was cumbersome and you spend extra time each week doing ___. So did the association staff that helped us develop novi. They told us that it needed to be really easy and simple to use.