Brijmani Kumar has over 8 years of experience in RF optimization for LTE and CDMA networks. He currently works as an RF LTE Optimizer for Reliance Jio, where he is responsible for deployment and optimization of LTE networks in Delhi. Previously he worked for Ericsson as an RF Optimizer, where he optimized CDMA and LTE networks in the US. He is proficient in various RF optimization tools and has expertise in improving network KPIs.

1. BRIJMANI KUMAR
RF LTE Optimizer
Email: brij.mani@gmail.com
Contact no: +919582805078
OBJECTIVE
To pursue a highly challenging and creative career in the field of Telecom, where I can apply my existing
knowledge and creativity, acquire new skills and contribute effectively to the organization.
Total Experience: 8 years’ experience in RF.
A) RF Manager – Reliance Jio March 2015 to Present
Designation : RF LTE Optimizer
Project : Deployment & optimizing for LTE on 1800 & 2300 MHz.
Location : Delhi-Gurgaon
Scope of Work: LTE 1800 & 2300 MHz Pre-launch and Post launch for Delhi & NCR region
LTE 2300/ 1800 MHz: - PRE Optimization Process
• Currently working on deployment for VoLTE in Reliance JIO
• Working on recommending optimization changes by analysis of coverage, pilot pollution for LTE.
• Analyzed data on problem areas such as call drops, and attach failure, volte set up time.
• Understanding of the Access Technologies LTE air interface
• Responsible for improving LTE network KPIs like Retainability / Accessibility etc.
• Perform Parameter tuning for network optimization
• Undertake neighbor optimization activities for network performance improvement (KPIs) and
optimization tasks
• MRO testing with the help of grid testing to analysis of RSRP & Throughput value.

2. B) Lead RF Optimizer – Ericsson Global India pvt.ltd. March 2010 to Present
Designation : Senior Engineer
Project : Deployment & optimizing for CDMA & LTE on 800 MHz (Sprint)
Location : Noida, UP
Scope of Work: CDMA & LTE 800 MHz Pre-launch and Post launch for Houston & Kansas Market
CDMA 800MHz: - PRE Process:- (Ericsson system)
1. Parameter Audit (Like Switch, Market, Frequency Band, SID, NID, TPTLO, CBTH, PAGEG, SYNG,
PILOTG, PERPOWER, MPTTR
2. Tilt Audit (initially we need to Set according to the design tilt)
3. NOA Tag Audit (Initially whenever the site integrates, there is NOA tag with it in CACP, then after
Approval of sprint, sites need to be launched and launched sites shouldn’t have NOA tag in CACP. )
4. Non Approved on Air Audit (if the cluster is not approved by sprint then all the sites in that clusters
Should be wilted i.e. not taking traffic)
5. Data fill in CACP.
6. As per integrated sites status (if the sites more than 95% integrated) need to send the cluster for the
Approval of Sprint.
7. If the cluster is approved, need to make the cluster alarm free to launch the cluster. Need to provide the
list of sites lying in the approved cluster to the NIC to check the alarms.
8. NIC will revert the updated report for the cluster and after looking into the alarms provided by the NIC;
we need to raise the tickets in ERTT and takes follow up and track daily the status of ERTT.
9. Need to create logical neighbors in CACP
10. Need to check neighbor in CACP.
11. MMTA & HHO (Hard Handover)
12. Need to check the hardware from NIC.(If any issue persisting need to raise the ERTT ticket).
13. Daily need to plot the integrated sites on the MapInfo to check the current scenario.
14. Database should need to update without any fail.
Post Process:-
1. Need to work on Top offenders of the cluster (Top offender is decided on basis of drop raw count)
2. NLTA (NEWTUN RUN), By NEWTUN we can check swap sector and coverage hole, PN overshoot
sectors etc.
3. ACO/PCO for CDMA 800MHz & Rx Delta check
LTE 800MHz: - PRE & POST Process
• Currently working on optimizing Data networks for LTE
• Working on recommending optimization changes by analysis of coverage, pilot pollution for LTE.
• Analyzed data on problem areas such as call drops, and call set up failure.

3. • Understanding of the Access Technologies LTE air interface
• LTE Basic Call flow, mobile operations, Ability to use Network Performance tools
• Responsible for improving LTE network KPIs like Retainability / Accessibility etc.
• Perform Parameter tuning for network optimization
• Undertake neighbor optimization activities for network performance improvement (KPIs) and
optimization tasks
• Experienced with performing LTE new site ATP.
Previous Experience in Ericsson India Global services
Designation : Engineer Engineering
Project : Sprint Nextel Corporation (Vendor Lucent)
Location : Noida (India)
Worked on Sprint project for EVDO & 3G1X (CDMA) on 1900MHz planning &optimization
• Providing an excellent customer experience, by anticipating and resolving customer issues in a manner
that exceeds the customer expectations.
• Communicating regularly with the customer to evaluate satisfaction and proactively identify upcoming
Needs.
• Coordinating with product teams to meet customer needs, while managing customer expectations to
Prevent overload or missed deadlines.
• Analyzing SLA and KPI on a regular basis to raise issues proactively and getting them corrected.
• Neighbor List tuning by generating periodic Homax and MapInfo for new and existing sites.
• Kpi’s improvement through search window optimization & various Lucent forms like OMCR-RAN, OMP
SHELL, ECP, CELL2, FCI, GUI, BTSEQP, CDHFL, CDHNL & CEQFACE
• Identification of correct handoff targets for sites on all major & secondary traffic.
• Monitoring KPI’s and Performance analysis by % block call, %Call drop, soft handoff, hard handoff,
semi-soft handoff (Target & Request), Peak TCE, Carrier MOU, cell CE blocking etc.
• Responsible for Pre & Post Optimization by verify the factors like-RxThroughput, TX Throughput, DRC,
SINR, Interference, Pilot Pollution, fringe sector etc.
• Report analyses for kpi’s improvement are Distance banding report, Translation report, Trending
Report, RF SM report.
• Working on Daily SLA Report to meet the KPI of the Existing network.
• Analysis of sites due to CEs, Packet Pipes and Walsh code blocks etc.
• Report analyses i.e., T1 ADD/REMOVAL, CARRIER ADD/REMOVAL & CEs CARD
• ADD/REMOVAL for kpi’s
Improvement by using deployment tracker, translation report, trending report etc.
• Working on ACO & PCO to meet threshold value of network i.e. ACO is less than 20% and PCO is less
than 72%.
Ericsson Training
• Training(1 month) on 3G1X CDMA containing single carrier optimization & multicarrier optimization,
RTD & DBOT concept, CDHFL & CDHNL tuning, neighbors list & combined neighbor list concept.(Mr.
Telex by sprint trainer)
• Training on LTE Basic Call flow, mobile operations, Ability to use Network Performance tools,

4. Understanding of the Access Technologies LTE air interface.
• Training (1 month) on CDMA & EVDO & multicarrier optimization, IFHO Concept (Mr. Anirban Ghosh
by sprint trainer).
• Fluency & Expression training duration 2 weeks (Mrs. Vandana by Evolv trainer )
Achievements
• Got ACE award for meeting the majority KPI’s of the network for my market.
• Got POWER award for taking initiatives, doing Zone Splitting & Rezoning and also for handling
customer complaints in real time.
• Cleared TOEIC similar to TOFEL.
Tools Used
 Citrix tool
• Tems Discovery, Neat Pass tool, Site handler, ACTIX, Netwatch Live, Reveal, Falcon, Ntac mobility,
Rop filter, RCV log filter, DO-NL, iTune-NL, Cockpit optimization tool.
• Windcatcher, Vertex tool, and Flux evdo.
• MapInfo 6.5, 7.5, 8.5, 10.0, MapWindow GIS, Quantum GIS 1.0, Google earth.
B) RF Engineer – Prithvi Information Solutions Ltd January 2008 to March 2010
Designation : RF Engineer (Optimizer)
Project : Reliance EVDO
Location : Gurgaon
Job Profile
• Worked on ALU (EVDO) in Delhi as Analyzer & optimizer.
• Co-ordinate the drive test team
• Analysis of Drive Test log files using ACTIX Post Processing Tool to resolve the problem.
• Neighbor List tuning by generating periodic Homx and MapInfo for new and existing sites.
• KPI improvement through various Lucent forms like FCI, GUI, and CEQFACE.
• Identification of correct Handover Targets for sites on all major & secondary traffic.
• Monitoring KPI and Performance analysis by Call drop, soft handoff, CSSR etc.
• Verify network performance factors like site locations, antenna heights, azimuths, antenna
Tilts (MT&ET)
• Responsible for Pre & Post Optimization by verify the factors like-RxThroughput, TX Throughput, DRC,
SINR, Interference, Pilot Pollution etc.
• Preparations of cluster reports and plot based on cluster acceptance signoff with Reliance customer.
Tools Used
• ACTIX(Spotlight)
• LDAT 3G1X
• MAPINFO PROFESSIONAL 6.5,7.5,8.5,10.0

5. • AGILENT E6474A nitro 9.3,12.1,14.0
• NET TERM & GUI
Previous Employer
C) RF Engineer – Aircom International India LTD. June 2007 to December 2008
Designation : RF Engineer
Project -1 : Worked on Alcatel-Lucent 600 new sites project for Reliance Communications carried out
In Rajasthan and 200 new sites in Maharashtra.
Job Profile
• Drive test on Agilent E6474A version nitro 9.3 & Tems investigation 8.1 and physical optimization.
• Solving RF problems through Physical optimization of network according to coverage and capacity
requirement.
• Monitoring KPI and Performance analysis by Call drop, HOSR, CSSR. Etc.
• Responsible for Pre & Post Optimization and verify network performance factors like- Rx level, TX level,
FER, EcIo, Interference, Pilot Pollution etc.
• Processing of data collected from sites on LDAT4.11.030.
• ECP Form updating (FCI)
• Verify network performance factors like site locations, antenna heights, azimuths, antenna
Tilts (MT&ET)
• Able to relate problems faced by subscribers to RF optimization.
• Done VSWR by site master.
Relevant Tools and Software proficiency:
Design Tool: MapInfo 7.5, 8.5, 10.0
Post Processing Tool: MAPINFO 7.5, LDAT 3G CDMA.Actix
Drive Testing Tool: Agilent Nitro9.3 12.1, Tems6.1, Neptune.
Other Tools: VSWR meter (Anritsu & Bird), & GPS
Software/OS: windows 2000/XP and office 2000/XP
Relevant Tools and Software Proficiency
Design Tool : MapInfo Version 6.5, 8.5, RL Tool, Google earth
Post Processing Tool : Global Mapper8, MAPINFO 7.5, LDAT 3G CDMA, MIPT
Drive Testing Tool : Agilent Nitro 9.3, 12.0, 12.1, Tems Investigation 6.1
Other Tools : VSWR meter (Anritsu & Bird), & GPS
Software/OS : C & C++, Dos, Windows XP
Packages : Excel, power point, word
Training and Workshop

6. • One month training on GSM & CDMA at Infinite softcom solution (ISS), Gurgaon
• Done Drive test for TTSL in Rajasthan, Madhya Pradesh, and Gujrat.
Professional Qualification
• B.Tech in Electronics with First Division from Bhagwant Institute of Technology, Muzaffarnagar
Affiliated to U.P.Technical University, Lucknow (U.P).
Personal Information
Father’s Name : Shri Dwarika Prasad
Date of Birth : 25th
Dec 1984
Marital Status : Married
Languages Know : English and Hindi
Nationality : Indian
Permanent address : R-Z-A/150 Dabri Extension (EAST)
New Delhi-45
Date: (Brijmani Kumar)

7. • One month training on GSM & CDMA at Infinite softcom solution (ISS), Gurgaon
• Done Drive test for TTSL in Rajasthan, Madhya Pradesh, and Gujrat.
Professional Qualification
• B.Tech in Electronics with First Division from Bhagwant Institute of Technology, Muzaffarnagar
Affiliated to U.P.Technical University, Lucknow (U.P).
Personal Information
Father’s Name : Shri Dwarika Prasad
Date of Birth : 25th
Dec 1984
Marital Status : Married
Languages Know : English and Hindi
Nationality : Indian
Permanent address : R-Z-A/150 Dabri Extension (EAST)
New Delhi-45
Date: (Brijmani Kumar)