Lakshman Rao is a telecom engineer seeking a position to utilize his 3 years of experience in the telecom industry. He has skills in network planning, optimization, and troubleshooting for technologies including GSM, CDMA, and WCDMA. He is proficient with various drive test and post-processing software tools used for network monitoring, optimization, and issue resolution. His experience includes projects with BSNL, Idea, MTS, and Tata focusing on tasks like drive testing, data analysis, parameter tuning, capacity planning and issue management.
1. CURRICULAM VITAE
VATADA LAKSHMAN RAO
Email Id:lakshman.nutekindia@gmail.com
Mobile no : +91-8977879745.
Carrier Objective :
Seeking a better position and to utilize my skills and abilities to render my services to the
organization in a most effective mode, innovative and flexible.
Executive Synopsis:
Having an Experience of 3 Years in Telecom Industry.
Proficientin Post Processing Software likeTEMS,NEMO,XCAL,ZXPOSCNA,ZXOPSCNT,ZXPOS
CNO2 software ,Discovery andGPS tool like Map Info Professional.
Proficient in Wireless Network Planning and simulation software like Discovery.
Proficient in Drive Test Software likeTEMS,XCAL,ZXPOSCNT.
Network Optimization of 3G/ 2G technology by analyzing KPI’s, Drive Test & physical
optimization like antenna tilt, antenna azimuth changes & checking and changing the Cell RF
Parameters.
RNC Parameter Audit, Cell Parameter Audit, Database and Neighbor planning for the network,
testing new features for latest RAN versions.
Analyze Drive Test log for signal strength, pilot pollution, interference, coverage lacking,
handover, neighbor cell relation, cell selection/reselection.
Neighbor planning (Neighbor addition & deletion) &Neighbor tuning to overcome overshooting
problems in the network.
Analyzing the worst performing cells based on PDP context activation time (i.e. ping test), call
drop rate, Poor CS & PS Handover success rate, and High Access failure rate, Low call set up
success rate, Poor uplink and downlinks Quality in Network/RNC to improve the overall KPIs.
Based upon the analysis suggest the various changes that are need to be the reason for KP I
degradation.
Pre and Post Drive test for the Clusters.
Familiar with the launch strategy of 2nd and 3rd carriers for WCDMA. Also worked on UMTS at
900 Mhz band. Traffic balancing with hybrid technologies and different carriers.
Prepare presentations for client regarding site with the help of post processing tools.
WCDMA fundamentals, Spreading codes (Channelization & Scrambling), Power control,
Admission Control, Load control, Soft/Softer handover, Capacity limitation, Cell breathing.
Drive test data post-processing, map plots and report generation, frequency planning and
interference analysis, and site database maintenance.
Perform design criteria, system dimensioning and traffic analysis (growth and trending).
Making radio network parameters retuning in order to improve major KPI performance (Basic
parameters, handover parameters, idle mode parameters and radio channel management).
Wireless Network Planning, Optimization and Troubleshooting for technologies including
GSM,CDMA.
Radio Network Performance management of GSM network.
Post Processing of Drive Test log files to extract the network related information to assist in
troubleshooting and Optimization.
Performance management for the wireless network with aid of the Daily Performance Reports.
Handling technical aspect of project from design stage through implementation.
Network dimensioning, Network parameter and KPI optimization.
Coverage and data throughput analysis through data drive.
2. RF drive test analyzing drive test data, Post processing.
RF Drive test for Interference analysis.
Customer interaction for resolving the complaints.
Comparative Drive test, Neighbor list & Physical optimization recommendation.
Suggestions giving for any field work issues.
Professional Experience.1:
ZTE Telecom India Pvt.Ltd(NU TEK).[May 216 to Till now]
Sr.RNO
ZTE-BSNL-SLA Base Project,Karnataka.
Responsibility:
I am working in BSNL Projectas a Team Lead inZTE Telecom India Pvt. Ltd at Hyderabad
for ZTE-BSNL 2G & 3G project.
• Project Planning, Review of Daily Progress of sites and meetings with customers and Clients.
• Team Management and Interaction with Clients, Supply and Contract Management of the Sites
Issues so as to achieve Site Progress as per projected Plans.
• Monitoring the daily KPI report of the network, analyzing the same and plan for the activities if
required.
• Responsible for implementing and integration of the network and meeting the SLA of escalated
technical issues.
• Planning of Acceptance Testing of Sites Equipments and Liasoning with Nutek for Acceptance
Testing of Equipments for completion of AT as per target plan
• Collection of Provisional Acceptance Certificate/Work Completion certificate based on the agreed
contract with customer and handing over it to finance team for Invoicing.
Professional Experience.2:
ZTE Telecom India Pvt.Ltd(NU TEK).[Otc2015 to April 216]
RNO
ZTE-Idea GlobalProjectKTK,Bangalore.
Responsibility:
I was workedin IdeaGlobal Project as a RNO at ZTE Telecom India Pvt. Ltd in Bangalore
for ZTE-Idea 2G project.
Able to generate & prepare the reports on daily & weekly basis by using
TEMS,NEMO,DISCOVERY software.
Idea KPI reports followed Throughput, DRC.
Drive test Data Analyzing of call drops, call failures, handoff failures, Poor coverage holes of
Qul, C/I& FER.
Verifying and optimize the high utilization sites and trying to share load by other nearby sites
by optimization or height increase, If not suggesting capacity site near to poor coverage holes.
If needed Giving Proposal for new site or Adding additional sector in existing site.
Handling the customer complaints and analyzing the worst performing sectors, giving proper
trouble shooting process to meet the bench marks in MS KPI.
Completed comparison drive test for GSM, Tata CDMA & MTS with TEMSand XCAL tool at
Bangalore.
Comparing radio utilization of site, if any poor utilization sites or Cells observed then changing
the optimization according to Clutter to increase the even utilization.
Providing LAC, CI & PN planning for new sites & additional sector in existing site to BSC Team.
suggestions giving for any field work issues.
3. Verifying of missing Neighbors & configuring Neighbors in BSE As per FER plot in drive test data
&customer complaints.
Configuring neighbors as Inter BSC & Intra BSC handoff for new sites & additional sectors in
BSC.
Maintaining RF Quarterly Drive test New sites, additional sectors & coverage improvement
reports.
Keeping healthy relationship with the Customer.
ZTE Telecom India Pvt.Ltd(NU TEK).[Jan2015 TO Otc2105 ]
RF Engineer
MTS-ZTE Project KTK, Bangalore.
Responsibility:
Attending and solving Customer Complaints by proper solution for EVDO and 1x .Suggesting the
possible solutions. If needed giving proposal for new cell site.
Optimizing cell sites by investigating capacity and coverage problem, Interference Analysis,
Dropped calls, Missing Neighbours, Coverage Holes.
Recommendations making as Defining missing RF parameters, proposing antenna azimuth, tilt.
Site Audit for new site has been done such as Photos of Clutter surrounded by new sites,
Azimuth, Building Height, Tower height ,Antenna Height, Antenna Type, Model, Tilt(Mechanical)&
Feeder cable length.
Conduct Drive Test after the site Integration, optimize if any issues like relevant wrong MSC
parameters definition, Border sector Handovers, Neighbors relation and others.
To find the coverage of the network (1X) & to verify different Parameters e.g. Rx level, TX level,
FER, EC/Io, TXAd&Cell Id.
EVDO Drive test observing parameters of C/I, DRC, SINR, FWD PPP, FWD FTP and REV PPP, REV
FTP.
Making PPT, PRE & POST Reports for new cell sites For 1X & EVDO.
Drive Test Data processing and Analysis and providing suggestion regarding optimization.
Optimizing cell sites by investigating capacity and coverage problem, Interference Analysis,
Dropped calls & Missing neighbors.
Make the analysis report & Comparison report (Pre & Post Comparison of Drive Plot showing the
improvement in the network) from the drive data.
Finding the reasons for any poor RX LEVEL, CALL DROPS & Suggesting the possible solutions.
Verifying the KPI(IP RFS report) before Attending customer complaint.
ZTE Telecom India Pvt.Ltd (IWS)[June 2013 to Nov2014]
Hyderabad,AndhraPradesh,RFEngineer
TATA-ZTE Project.
Responsibility:
I worked as RF drivetest Engineer for ZTE Telecomm India Pvt. Ltd in Andhra Pradesh circle
for Tata (CDMA) project.
Site Audit with verification of tilts, azimuths, height of CDMA antennas.
Performing Drive Test using ZTE CNT and drive test report are analyzed using ZTE CNA
software.
To find the coverage of the network & to verify different Parameters e.g. Rx level,Tx level, FER,
EC/Io, Cell ID as per defined by the operator.
Checking assigned Handoffs and suggesting addition or removal of neighbors.
Finding the reasons for any poor Rx level, Call drops & suggesting the possible solutions.
I Have Completed scft, pre& post drives & Changing the Rx,Tx Cables inside the BTS if any cable
swap will occurred.
4. Tools used :
Drive Test Tools : TEMS,Discovery,XCAL,CNT 5.94, CNT V5.96(HASP Tool,CDT),
Processing Tool : CNA7.0,CNA V11.3,XCAP.
MapInfo Professional : MapInfo 8.5/7.5.
ZTE ZXPOS CNO2 software, Crop FTP lite tool for QOS testing.
Academic Profile :
B. E. in Electronic and Communication engineering with 66% in JNTU University.
Intermediate in Govt Junior College with 83% in hiramandalam, AP.
SSC in Z.P. high School with 80% in AP SSC Board.
Strengths :
Feel Simple & Spirit of innovation.
Punctual & Patience.
PERSONALS DETAILS:
Father’s Name : V.MukundaRao
Date of Birth : 23th
-July -1992
Nationality : Indian
Marital Status : Unmarried
Languages Know : English,Telugu&Hindi.
Declaration:
I hereby declare that all the above details furnished by me are true to the best of my
Knowledge.
Place:
Date:
(V.LAKSHMANRAO)