1) MOLYKOTE BR2 Plus Grease is a premium lithium soap grease including solid lubricants with excellent lubricating capabilities for metal-on-metal friction under heavy loads at slow to fast speeds.
2) It has superior load carrying capability, extended time possible between applications, good oxidation resistance, and can provide lubrication under difficult conditions.
3) The grease reduces wear and corrosion and prevents fretting corrosion, making it ideally suited for applications like roller bearings, slide bearings, and automotive chassis components.
This safety tool is a must if you have a need to move fingers away from the impact zone of a hammer on flogging spanners and from pinch points when using impact wrenches and hydraulic torque equipment.
Please spend 5 minutes to browse through our key products for the drilling rigs segment. We call these the Rig Essentials Line. Please do not hesitate to ask us for more information. Our Sales Support team is ready to send out detailed information on any products that you may require. Thank you again and we look forward to hearing more on our requirements.
Regards
Manju, Inside Sales
Project Sales Corp
28, Founta Plaza I Suryabagh I Visakhapatnam 530020. AP I India
Phone No. +91-891-2566293 I Web www.projectsalescorp.IN
With over 750 products in its stocking range, Project Sales Corp is undoubtedly India’s largest oilfield ropes, soaps, dopes store. We call it the Rig Essentials Line. Take a look inside to see some of the key products that we stock in this category of MRO, Tools, Safety and Rig Essentials. Whether you are a rig operator or an oilfield supplier, you will find consolidating your purchases with us for the items we stock would be the right way to service your end-users requirement the quickest way !
An ideal flanged joint would consist of two, mirror-finish, perfectly flat
and parallel surfaces bolted directly together to create a leak-free seal.
However, manufacturing processes do not allow for perfect sealing surfaces.
Most flange faces have surface irregularities that cannot be sealed without
the use of some type of compressible, resilient material or a combination of
materials between them to seal the fluid being transferred. This is true
even for the most finely machined surfaces as a turbine flange where the
surface asperities can create a leak situation.
Project Sales Corp presents an exhaustive range of sealing and gasketing
material that can be used to effectively seal flanges and in many cases seal
leaks that can develop in operation and can be sealed in-situ without an
outage of the equipment. We stock gasketing compounds, jointing Compounds,
Flange Sealants, Thread Sealants, Pipe Sealants, Form-in-place RTVs, Turbine
Flange Sealing Compounds. Please see attached presentation for more details.
Regards
Anil Tiwari
Project Sales Corp
28, Founta Plaza I Suryabagh I Visakhapatnam 530020. AP I India
Phone No. +91-9866467276 I Web www.projectsalescorp.IN
Project Sales Corp, marketers of leading impact glove brands Kong™, Mechanix®, Ringers and HexArmor® in India now offers a complete hands-off tools portfolio to
include several products to support companies in India with a proactive Hands Free Policy.
While access to data in the India’s offshore industry is not available, one thing, from our sale of impact gloves to almost all O&G companies, is clear – the industry
uses the impact gloves as a last line of defense for impact protection and to reduce/ if not eliminate pinched fingers, bruising blows and hairline fractures. The
first probably is the company’s hands off policy that seeks to identify and document safer methods of handling suspended loads to reduce/ if not eliminate pinch
points, “struck by” , “caught between” and other hand injury situations that occur due to unpredictable or unanticipated movement of suspended/supported loads. We have
seen some company actually list down each specific task - whether hands on or hands off - in activities associated with drilling, running casings, cementing or
logging, etc. Hands Free Lifting refers to personnel not touching a load (with any part of their body) that is connected to a mechanical lifting device and is
a key constituent of the hands-off policy.
Project Sales Corp has brought in products internationally recognized by oil drilling companies as a safer alternative and a key component of the hands off policy on
board drilling rigs. These would includes Shove-it, Fingersaver, Ergonomix, Saf-T-Guider, Helix Taglines, Retriever tool and more.
1. c
d
Product Information
Specialty
Lubricants MOLYKOTE® BR2 Plus
Grease
Premium lithium soap grease including solid lubricants with
excellent lubricating capabilities for metal-on-metal friction
FEATURES under heavy loads at slow to fast speeds
" Superior load carrying capability
" Extended time possible between APPLICATIONS
applications " Ideally suited for roller bearings, slide bearings, guides, roller guides, ball joints,
" Good oxidation resistance
splines, small low-speed gears, and as an automotive chassis grease.
" Can provide lubrication under conditions
where it is difficult to create oil film
" Reduces wear TYPICAL PROPERTIES
" Superior water resistance Specification writers: These values are not intended for use in preparing specifications.
" Superior corrosion resistance Please contact your local Dow Corning sales representative prior to writing specifications on
" Prevents fretting corrosion this product.
COMPOSITION Standard* Parameter Unit Value
" Mineral oil Appearance Black
" Lithium soap JIS K 2220 Penetration (worked 60 times) mm/10 265 to 295
" Solid lubricants NLGI class 2
" EP additives
" Corrosion inhibitor JIS K 2220 Drop point ºC 185
Service temperature range1 ºC -30 to 130
JIS K 2220 Bleed (100ºC 24 hours) % 2.0
JIS K 2220 Evaporation (99ºC 22 hours) % 0.2
JIS K 2220 Oxidation resistance (99ºC 100 hours) MPa 0.03
JIS K 2220 Water washout (38ºC/1 hour) % 1.0
Shell four ball test OK load N 3150
Wear scar (1 hour, 800N) mm 1.2
DIN 51821-02-A FAG bearing test, type FE9
(6000rpm, 130ºC, 4500N) hours 40
DN value mm/min 450,000
Corrosion resistance test
ASTM D1743 Humidity corrosion 1 (None)
SKF Emcor test 0 (None)
1. Up to 150ºC for short periods of time.
*JIS: Japanese Industrial Standard.
ASTM: American Society for Testing and Materials.
DIN:Deutsches Industrie Norm.