Molykote 7514 is a synthetic grease made from PAO/ester base oil and a lithium complex thickener. It has a wide service temperature range from -40 to +180°C and provides long-term lubrication and corrosion protection. The grease is suitable for intermediate transmissions and starter motors. It has been used successfully for lubricating needle bearings in planetary gears.

1. c
d
Product Information
Specialty
Lubricants
MOLYKOTE® 7514
Synthetic Grease
FEATURES Synthetic (PAO/Ester) grease especially for intermediate
" Wide service temperature range transmissions of starter motors
-40 to +180ºC (-40 to 356ºF)
" Suitable for long term lubrication APPLICATION
" Good low temperature performance
" Used successfully for needle bearings in planetary gears.
" Good protection against corrosion
COMPOSITION TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications.
" PAO/Ester base oil Please contact your local Dow Corning sales representative prior to writing specifications on
" Lithium complex thickener this product.
" EP additives
" Corrosion inhibitors Standard* Test Unit Value
Color Light brown
Consistency, density, viscosity
DIN 51 818 NLGI consistency class 1-2
ISO 2137 Worked penetration mm/10 290-320
ISO 2811 Density at 20ºC (68ºF) g/ml 0.9
DIN 51 562 Base oil viscosity at 40ºC (104ºF) mm /s 2
49
Temperature
Service temperature ºC -40 to +180
ºF -40 to +356
ISO 2176 Dropping point ºC >200
ºF >392
DIN 51 805 Kesternich method - flow pressure at -40ºC (-40ºF) mbar <800
Resistance
DIN 51 808 Oxidation resistance, bar 0.1
pressure drop after 100h, 99ºC (210ºF)
Corrosion protection
DIN 51 802 SKF-Emcor method - degree of corrosion 0
* DIN: Deutsche Industrie Norm.
ISO: International Standardisation Organisation.

2. HOW TO USE PACKAGING LIMITED WARRANTY
Clean points of contact. Apply in the This product is available in various INFORMATION - PLEASE
same way as lubricating greases, using container sizes. Detailed information READ CAREFULLY
brush, spatula or automatic lubrication on container size should be obtained The information contained herein is
device. Can be used in central from your nearest Dow Corning sales offered in good faith and is believed to
lubrication systems. office or Dow Corning distributor. be accurate. However, because
conditions and methods of use of our
HANDLING PRECAUTIONS LIMITATIONS products are beyond our control, this
Product safety information required for This product is neither tested nor information should not be used in
safe use is not included. Before represented as suitable for medical or substitution for customers' tests to
handling, read product and safety data pharmaceutical uses. ensure that Dow Corning's products are
sheets and container labels for safe use, safe, effective, and fully satisfactory
physical and health hazard information. HEALTH AND for the intended end use. Suggestions
The material safety data sheet is ENVIRONMENTAL of use shall not be taken as
available on the Dow Corning website INFORMATION inducements to infringe any patent.
at www.dowcorning.com. You can also To support Customers in their product
obtain a copy from your local safety needs, Dow Corning has an Dow Corning's sole warranty is that the
Dow Corning sales representative or extensive Product Stewardship product will meet the Dow Corning
Distributor or by calling your local organization and a team of Product sales specifications in effect at the time
Dow Corning Global Connection. Safety and Regulatory Compliance of shipment.
(PS&RC) specialists available in each
USABLE LIFE AND area. Your exclusive remedy for breach of
STORAGE such warranty is limited to refund of
When stored at or below 20ºC (68ºF) in For further information, please see our purchase price or replacement of any
the original unopened containers, this website, www.dowcorning.com or product shown to be other than as
product has a usable life of 60 months consult your local Dow Corning warranted.
from the date of production. representative.
DOW CORNING SPECIFICALLY
DISCLAIMS ANY OTHER
EXPRESS OR IMPLIED
WARRANTY OF FITNESS FOR A
PARTICULAR PURPOSE OR
MERCHANTABILITY.
DOW CORNING DISCLAIMS
LIABILITY FOR ANY
INCIDENTAL OR
CONSEQUENTIAL DAMAGES.
WE HELP YOU INVENT THE
FUTURE."
www.dowcorning.com
MOLYKOTE 7514 Synthetic Grease WE HELP YOU INVENT THE FUTURE. is a trademark of Dow Corning Corporation.
2 28/08/2002 Dow Corning and MOLYKOTE are registered trademarks of Dow Corning Corporation.
Ref. no. 80-3142-01 DC 4422 ©2002 Dow Corning Corporation. All rights reserved.