MOLYKOTE 7348 is a high temperature silicone grease for rolling-element bearings. It has features such as low evaporation, high oxidation resistance, good long term lubrication, and water resistance. Typical properties include a light beige color, NLGI consistency class of 2, and service temperature range of -20 to +230°C. The grease can be used to lubricate bearings in driers, conveyor chains, and sterilizers.
Derivada de la Acura® manual 825, la línea 826 XS ha sido
diseñada para los científicos de investigación. Los ocho
modelos, más cortos, suaves y ligeros, ofrecen prestaciones clave para lograr la excelencia en el pipeteado.El sistema de calibración por el usuario
Swift-set.
Dématérialisation des factures clients : Fichet-Bauche Télésurveillance chois...ESKER
Fichet-Bauche Télésurveillance, spécialiste des solutions de haute sécurité et de la télésurveillance à distance, choisit Esker pour le traitement et l’envoi de ses 14 000 factures clients annuelles. Grâce à la solution Esker, Fichet-Bauche Télésurveillance a pour objectif d’améliorer la rapidité, la fiabilité et la sécurité tout au long du cycle de facturation.
This safety tool is a must if you have a need to move fingers away from the impact zone of a hammer on flogging spanners and from pinch points when using impact wrenches and hydraulic torque equipment.
Please spend 5 minutes to browse through our key products for the drilling rigs segment. We call these the Rig Essentials Line. Please do not hesitate to ask us for more information. Our Sales Support team is ready to send out detailed information on any products that you may require. Thank you again and we look forward to hearing more on our requirements.
Regards
Manju, Inside Sales
Project Sales Corp
28, Founta Plaza I Suryabagh I Visakhapatnam 530020. AP I India
Phone No. +91-891-2566293 I Web www.projectsalescorp.IN
With over 750 products in its stocking range, Project Sales Corp is undoubtedly India’s largest oilfield ropes, soaps, dopes store. We call it the Rig Essentials Line. Take a look inside to see some of the key products that we stock in this category of MRO, Tools, Safety and Rig Essentials. Whether you are a rig operator or an oilfield supplier, you will find consolidating your purchases with us for the items we stock would be the right way to service your end-users requirement the quickest way !
An ideal flanged joint would consist of two, mirror-finish, perfectly flat
and parallel surfaces bolted directly together to create a leak-free seal.
However, manufacturing processes do not allow for perfect sealing surfaces.
Most flange faces have surface irregularities that cannot be sealed without
the use of some type of compressible, resilient material or a combination of
materials between them to seal the fluid being transferred. This is true
even for the most finely machined surfaces as a turbine flange where the
surface asperities can create a leak situation.
Project Sales Corp presents an exhaustive range of sealing and gasketing
material that can be used to effectively seal flanges and in many cases seal
leaks that can develop in operation and can be sealed in-situ without an
outage of the equipment. We stock gasketing compounds, jointing Compounds,
Flange Sealants, Thread Sealants, Pipe Sealants, Form-in-place RTVs, Turbine
Flange Sealing Compounds. Please see attached presentation for more details.
Regards
Anil Tiwari
Project Sales Corp
28, Founta Plaza I Suryabagh I Visakhapatnam 530020. AP I India
Phone No. +91-9866467276 I Web www.projectsalescorp.IN
Project Sales Corp, marketers of leading impact glove brands Kong™, Mechanix®, Ringers and HexArmor® in India now offers a complete hands-off tools portfolio to
include several products to support companies in India with a proactive Hands Free Policy.
While access to data in the India’s offshore industry is not available, one thing, from our sale of impact gloves to almost all O&G companies, is clear – the industry
uses the impact gloves as a last line of defense for impact protection and to reduce/ if not eliminate pinched fingers, bruising blows and hairline fractures. The
first probably is the company’s hands off policy that seeks to identify and document safer methods of handling suspended loads to reduce/ if not eliminate pinch
points, “struck by” , “caught between” and other hand injury situations that occur due to unpredictable or unanticipated movement of suspended/supported loads. We have
seen some company actually list down each specific task - whether hands on or hands off - in activities associated with drilling, running casings, cementing or
logging, etc. Hands Free Lifting refers to personnel not touching a load (with any part of their body) that is connected to a mechanical lifting device and is
a key constituent of the hands-off policy.
Project Sales Corp has brought in products internationally recognized by oil drilling companies as a safer alternative and a key component of the hands off policy on
board drilling rigs. These would includes Shove-it, Fingersaver, Ergonomix, Saf-T-Guider, Helix Taglines, Retriever tool and more.
1. Product Information
Specialty
Lubricants MOLYKOTE® 7348
Silicone Grease
FEATURES High temperature silicone grease for rolling-element bearings
• Low evaporation
• High oxidation resistance APPLICATION
• Good long term lubrication • Used successfully on bearings in driers and on conveyor chains of wood
• High drop point coatings plants. Also suitable for sterilizers.
• Water resistant
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications.
COMPOSITION Please contact your local Dow Corning sales representative prior to writing specifications
• Silicone oil on this product.
• Lithium complex thickener Standard* Test Unit Result
• Anti-oxidant Color Light beige
• Solid lubricants Consistency, density, viscosity
DIN 51 818 NLGI consistency class 2
ISO 2137 Worked penetration mm/10 265-295
ISO 2811 Density at 20°C g/ml 1.09
DIN 51 562 Base oil viscosity at 25°C mm²/s 500
Temperature
Service temperature °C -20 to +230; +250
for short periods
ISO 2176 Drop point °C >290
Load-carrying capacity
Four-ball tester
DIN 51 350 pt.4 Weld load N 1500
Resistance
DIN 51 807 pt.1 Water resistance, static 1-90
DIN 51 808 Oxidation resistance, pressure drop 100h, bar 0.1
99°C
Oil separation
Oil separation
DIN 51 817 Standard test % 1.9
* ISO: International Standardisation Organisation.
DIN: Deutsche Industrie Norm.
HOW TO USE HANDLING PRECAUTIONS
How to apply PRODUCT SAFETY
Clean bearing surfaces. Apply grease INFORMATION REQUIRED FOR
in the normal way using a brush, SAFE USE IS NOT INCLUDED.
grease gun or automatic lubricating BEFORE HANDLING, READ
system. MOLYKOTE 7348 Grease PRODUCT AND SAFETY DATA
can be used in centralised lubrication SHEETS AND CONTAINER
systems. LABELS FOR SAFE USE,
PHYSICAL AND HEALTH
HAZARD INFORMATION. THE
SAFETY DATA SHEET IS