Shanghai Bogvik Wear Material Co., Ltd (BOGVIK)is one of the most professional crusher parts manufacturer and distributor. We major supply crusher wear parts from 5kgs to 10000kgs in a broad variety of high managnese steel crusher wear parts and heat resistant steel alloys and iron, and crusher spare parts of famous crusher brand .
Our advantage: "Three Goods " --Good Quality. We adopt advance ALKALI PHENOLIC RESIN SAND production line ensure casting quality, Supply stable, good quality parts for any customers. Our foundry is located in Sichuan province, foundry area: 25000 square meter, 150 professional workers, productions capacity: 20000tons per year, whole production line adopts the international most advanced ALKALI PHENOLIC RESIN SAND molding process, completely solve the traditional production process which is difficult to overcome the blowhole, impacted sand and surface micro crack problems, greatly improve the product quality of wear parts. --Good Service ;
We could measure and design parts which customer enquiry. And customers could benefit from parts wear life, with lower processing costs. We have quality track system for sales parts, if parts happened to any quality problem, customers only tell us casting NO. And we could track parts quickly and solve problem at the first time. --Good Delivery ; Advanced production line greatly improves production efficiency, Shorts the delivery time, ensure the delivery time in time. Above advantages helps us to become increasingly competitive in the provision of crusher wear spare parts and services for domestic and international customers. Now introduce our foundry simply as follows, welcome to visit our foundry warmly and hope to build cooperation with you .
Thank you in advance for your attention to the certainty of good business.
Shanghai Bogvik Wear Material Co., Ltd (BOGVIK)is one of the most professional crusher parts manufacturer and distributor. We major supply crusher wear parts from 5kgs to 10000kgs in a broad variety of high managnese steel crusher wear parts and heat resistant steel alloys and iron, and crusher spare parts of famous crusher brand .
Our advantage: "Three Goods " --Good Quality. We adopt advance ALKALI PHENOLIC RESIN SAND production line ensure casting quality, Supply stable, good quality parts for any customers. Our foundry is located in Sichuan province, foundry area: 25000 square meter, 150 professional workers, productions capacity: 20000tons per year, whole production line adopts the international most advanced ALKALI PHENOLIC RESIN SAND molding process, completely solve the traditional production process which is difficult to overcome the blowhole, impacted sand and surface micro crack problems, greatly improve the product quality of wear parts. --Good Service ;
We could measure and design parts which customer enquiry. And customers could benefit from parts wear life, with lower processing costs. We have quality track system for sales parts, if parts happened to any quality problem, customers only tell us casting NO. And we could track parts quickly and solve problem at the first time. --Good Delivery ; Advanced production line greatly improves production efficiency, Shorts the delivery time, ensure the delivery time in time. Above advantages helps us to become increasingly competitive in the provision of crusher wear spare parts and services for domestic and international customers. Now introduce our foundry simply as follows, welcome to visit our foundry warmly and hope to build cooperation with you .
Thank you in advance for your attention to the certainty of good business.
www.bogvik.com
Stainless steel hardware from Reede displayKaren Chen
Reede International Ltd is a company located in Xiamen, China that produces stainless steel hardware. The document provides the company's name in Chinese and English, address, phone number, fax number, website, and specifies they produce stainless steel hardware.
Shanghai Bogvik Wear Material Co., Ltd (BOGVIK)is one of the most professional crusher parts manufacturer and distributor. We major supply crusher wear parts from 5kgs to 10000kgs in a broad variety of high managnese steel crusher wear parts and heat resistant steel alloys and iron, and crusher spare parts of famous crusher brand .
Our advantage: "Three Goods " --Good Quality. We adopt advance ALKALI PHENOLIC RESIN SAND production line ensure casting quality, Supply stable, good quality parts for any customers. Our foundry is located in Sichuan province, foundry area: 25000 square meter, 150 professional workers, productions capacity: 20000tons per year, whole production line adopts the international most advanced ALKALI PHENOLIC RESIN SAND molding process, completely solve the traditional production process which is difficult to overcome the blowhole, impacted sand and surface micro crack problems, greatly improve the product quality of wear parts. --Good Service ;
We could measure and design parts which customer enquiry. And customers could benefit from parts wear life, with lower processing costs. We have quality track system for sales parts, if parts happened to any quality problem, customers only tell us casting NO. And we could track parts quickly and solve problem at the first time. --Good Delivery ; Advanced production line greatly improves production efficiency, Shorts the delivery time, ensure the delivery time in time. Above advantages helps us to become increasingly competitive in the provision of crusher wear spare parts and services for domestic and international customers. Now introduce our foundry simply as follows, welcome to visit our foundry warmly and hope to build cooperation with you .
Thank you in advance for your attention to the certainty of good business.
This document lists color codes for Copic Sketch Markers. It includes color codes for various shades ranging from light to dark of blue, red, yellow, green, brown, black, gray and other colors. The codes are organized from light to dark with over 100 shades listed for most colors.
Shanghai Bogvik Wear Material Co., Ltd (BOGVIK)is one of the most professional crusher parts manufacturer and distributor. We major supply crusher wear parts from 5kgs to 10000kgs in a broad variety of high managnese steel crusher wear parts and heat resistant steel alloys and iron, and crusher spare parts of famous crusher brand .
Our advantage: "Three Goods " --Good Quality. We adopt advance ALKALI PHENOLIC RESIN SAND production line ensure casting quality, Supply stable, good quality parts for any customers. Our foundry is located in Sichuan province, foundry area: 25000 square meter, 150 professional workers, productions capacity: 20000tons per year, whole production line adopts the international most advanced ALKALI PHENOLIC RESIN SAND molding process, completely solve the traditional production process which is difficult to overcome the blowhole, impacted sand and surface micro crack problems, greatly improve the product quality of wear parts. --Good Service ;
We could measure and design parts which customer enquiry. And customers could benefit from parts wear life, with lower processing costs. We have quality track system for sales parts, if parts happened to any quality problem, customers only tell us casting NO. And we could track parts quickly and solve problem at the first time. --Good Delivery ; Advanced production line greatly improves production efficiency, Shorts the delivery time, ensure the delivery time in time. Above advantages helps us to become increasingly competitive in the provision of crusher wear spare parts and services for domestic and international customers. Now introduce our foundry simply as follows, welcome to visit our foundry warmly and hope to build cooperation with you .
Thank you in advance for your attention to the certainty of good business.
Shanghai Bogvik Wear Material Co., Ltd (BOGVIK)is one of the most professional crusher parts manufacturer and distributor. We major supply crusher wear parts from 5kgs to 10000kgs in a broad variety of high managnese steel crusher wear parts and heat resistant steel alloys and iron, and crusher spare parts of famous crusher brand .
Our advantage: "Three Goods " --Good Quality. We adopt advance ALKALI PHENOLIC RESIN SAND production line ensure casting quality, Supply stable, good quality parts for any customers. Our foundry is located in Sichuan province, foundry area: 25000 square meter, 150 professional workers, productions capacity: 20000tons per year, whole production line adopts the international most advanced ALKALI PHENOLIC RESIN SAND molding process, completely solve the traditional production process which is difficult to overcome the blowhole, impacted sand and surface micro crack problems, greatly improve the product quality of wear parts. --Good Service ;
We could measure and design parts which customer enquiry. And customers could benefit from parts wear life, with lower processing costs. We have quality track system for sales parts, if parts happened to any quality problem, customers only tell us casting NO. And we could track parts quickly and solve problem at the first time. --Good Delivery ; Advanced production line greatly improves production efficiency, Shorts the delivery time, ensure the delivery time in time. Above advantages helps us to become increasingly competitive in the provision of crusher wear spare parts and services for domestic and international customers. Now introduce our foundry simply as follows, welcome to visit our foundry warmly and hope to build cooperation with you .
Thank you in advance for your attention to the certainty of good business.
Global Mining Equipments is a one-stop solution for handheld pneumatic tools and accessories for the underground mining & construction industries. Over the years, our seasoned employees with decades of experience have adapted ourselves to be a leading supplier of rockdrills & spares for the growing mining &construction industry.
Shanghai Bogvik Wear Material Co., Ltd (BOGVIK)is one of the most professional crusher parts manufacturer and distributor. We major supply crusher wear parts from 5kgs to 10000kgs in a broad variety of high managnese steel crusher wear parts and heat resistant steel alloys and iron, and crusher spare parts of famous crusher brand .
Our advantage: "Three Goods " --Good Quality. We adopt advance ALKALI PHENOLIC RESIN SAND production line ensure casting quality, Supply stable, good quality parts for any customers. Our foundry is located in Sichuan province, foundry area: 25000 square meter, 150 professional workers, productions capacity: 20000tons per year, whole production line adopts the international most advanced ALKALI PHENOLIC RESIN SAND molding process, completely solve the traditional production process which is difficult to overcome the blowhole, impacted sand and surface micro crack problems, greatly improve the product quality of wear parts. --Good Service ;
We could measure and design parts which customer enquiry. And customers could benefit from parts wear life, with lower processing costs. We have quality track system for sales parts, if parts happened to any quality problem, customers only tell us casting NO. And we could track parts quickly and solve problem at the first time. --Good Delivery ; Advanced production line greatly improves production efficiency, Shorts the delivery time, ensure the delivery time in time. Above advantages helps us to become increasingly competitive in the provision of crusher wear spare parts and services for domestic and international customers. Now introduce our foundry simply as follows, welcome to visit our foundry warmly and hope to build cooperation with you .
Thank you in advance for your attention to the certainty of good business.
www.bogvik.com
Stainless steel hardware from Reede displayKaren Chen
Reede International Ltd is a company located in Xiamen, China that produces stainless steel hardware. The document provides the company's name in Chinese and English, address, phone number, fax number, website, and specifies they produce stainless steel hardware.
Shanghai Bogvik Wear Material Co., Ltd (BOGVIK)is one of the most professional crusher parts manufacturer and distributor. We major supply crusher wear parts from 5kgs to 10000kgs in a broad variety of high managnese steel crusher wear parts and heat resistant steel alloys and iron, and crusher spare parts of famous crusher brand .
Our advantage: "Three Goods " --Good Quality. We adopt advance ALKALI PHENOLIC RESIN SAND production line ensure casting quality, Supply stable, good quality parts for any customers. Our foundry is located in Sichuan province, foundry area: 25000 square meter, 150 professional workers, productions capacity: 20000tons per year, whole production line adopts the international most advanced ALKALI PHENOLIC RESIN SAND molding process, completely solve the traditional production process which is difficult to overcome the blowhole, impacted sand and surface micro crack problems, greatly improve the product quality of wear parts. --Good Service ;
We could measure and design parts which customer enquiry. And customers could benefit from parts wear life, with lower processing costs. We have quality track system for sales parts, if parts happened to any quality problem, customers only tell us casting NO. And we could track parts quickly and solve problem at the first time. --Good Delivery ; Advanced production line greatly improves production efficiency, Shorts the delivery time, ensure the delivery time in time. Above advantages helps us to become increasingly competitive in the provision of crusher wear spare parts and services for domestic and international customers. Now introduce our foundry simply as follows, welcome to visit our foundry warmly and hope to build cooperation with you .
Thank you in advance for your attention to the certainty of good business.
This document lists color codes for Copic Sketch Markers. It includes color codes for various shades ranging from light to dark of blue, red, yellow, green, brown, black, gray and other colors. The codes are organized from light to dark with over 100 shades listed for most colors.
Shanghai Bogvik Wear Material Co., Ltd (BOGVIK)is one of the most professional crusher parts manufacturer and distributor. We major supply crusher wear parts from 5kgs to 10000kgs in a broad variety of high managnese steel crusher wear parts and heat resistant steel alloys and iron, and crusher spare parts of famous crusher brand .
Our advantage: "Three Goods " --Good Quality. We adopt advance ALKALI PHENOLIC RESIN SAND production line ensure casting quality, Supply stable, good quality parts for any customers. Our foundry is located in Sichuan province, foundry area: 25000 square meter, 150 professional workers, productions capacity: 20000tons per year, whole production line adopts the international most advanced ALKALI PHENOLIC RESIN SAND molding process, completely solve the traditional production process which is difficult to overcome the blowhole, impacted sand and surface micro crack problems, greatly improve the product quality of wear parts. --Good Service ;
We could measure and design parts which customer enquiry. And customers could benefit from parts wear life, with lower processing costs. We have quality track system for sales parts, if parts happened to any quality problem, customers only tell us casting NO. And we could track parts quickly and solve problem at the first time. --Good Delivery ; Advanced production line greatly improves production efficiency, Shorts the delivery time, ensure the delivery time in time. Above advantages helps us to become increasingly competitive in the provision of crusher wear spare parts and services for domestic and international customers. Now introduce our foundry simply as follows, welcome to visit our foundry warmly and hope to build cooperation with you .
Thank you in advance for your attention to the certainty of good business.
Shanghai Bogvik Wear Material Co., Ltd (BOGVIK)is one of the most professional crusher parts manufacturer and distributor. We major supply crusher wear parts from 5kgs to 10000kgs in a broad variety of high managnese steel crusher wear parts and heat resistant steel alloys and iron, and crusher spare parts of famous crusher brand .
Our advantage: "Three Goods " --Good Quality. We adopt advance ALKALI PHENOLIC RESIN SAND production line ensure casting quality, Supply stable, good quality parts for any customers. Our foundry is located in Sichuan province, foundry area: 25000 square meter, 150 professional workers, productions capacity: 20000tons per year, whole production line adopts the international most advanced ALKALI PHENOLIC RESIN SAND molding process, completely solve the traditional production process which is difficult to overcome the blowhole, impacted sand and surface micro crack problems, greatly improve the product quality of wear parts. --Good Service ;
We could measure and design parts which customer enquiry. And customers could benefit from parts wear life, with lower processing costs. We have quality track system for sales parts, if parts happened to any quality problem, customers only tell us casting NO. And we could track parts quickly and solve problem at the first time. --Good Delivery ; Advanced production line greatly improves production efficiency, Shorts the delivery time, ensure the delivery time in time. Above advantages helps us to become increasingly competitive in the provision of crusher wear spare parts and services for domestic and international customers. Now introduce our foundry simply as follows, welcome to visit our foundry warmly and hope to build cooperation with you .
Thank you in advance for your attention to the certainty of good business.
Global Mining Equipments is a one-stop solution for handheld pneumatic tools and accessories for the underground mining & construction industries. Over the years, our seasoned employees with decades of experience have adapted ourselves to be a leading supplier of rockdrills & spares for the growing mining &construction industry.
Shanghai Bogvik Wear Material Co., Ltd is one of the most professional crusher parts manufacturer and distributor. We major supply crusher wear parts from 5kgs to 10000kgs in a broad variety of Managnese steel crusher wear parts and alloys steel and chromium iron, Ceramic Insert hammers or blow bars ,Titanium Carbide Insert Liners and crusher spare parts of famous crusher brand .
Wear and spare parts are at the heart of BOGVIK business and we are continually driven to find new and improved ways to optimize component life and equipment performance.
Depending on the application & our clients requirements we offer a range of manganese steel wear parts including Manganese13%, Manganese18% and Manganese22% all with or without chrome & / or molybdenum additions. All manganese liners supplied by BOGVIK are made to our own internal material specifications which are for more stringent than “standard” foundry material specifications.
BOGVIK has in excess of 10000 wear part patterns to fit the world’s most popular crushers. Our patterns cover jaw crushers, cone crushers, gyratory crushers, roll crushers, hammer crushers, horizontal shaft impactors and vertical shaft impactors. No matter what your requirements are, BOGVIK probably already has existing patterns for the wear parts.
We believe in collaboration and work hand-in-hand with our customers to develop solutions that leverages our practical experience, in-house engineering & metallurgical capabilities and manufacturing capacity to provide a complete solution that meets our customer needs.
Contact us today to see how we can help extend service life, improve throughput, optimize supply chain and reduce the total cost of ownership.
sales@bogvik.com
中文:
上海勃格维克耐磨材料有限公司是国内最专业的破碎机配件制造商和经销商之一。我们主要供应从 5 公斤到 10000 公斤的各种锰钢破碎机磨损件和合金钢和铬铁、陶瓷插入锤或板锤、碳化钛插入衬板和著名破碎机品牌的破碎机备件。
磨损和备件是勃格维克 业务的核心,我们不断寻求新的和改进的方法来优化部件寿命和设备性能。
根据应用和我们客户的要求,我们提供一系列锰钢耐磨部件,包括锰13%、锰18% 和锰22%,均添加或不添加铬和/或钼。勃格维克 提供的所有锰衬板均按照我们自己的内部材料规格制造,这些规格比“标准”铸造材料规格更严格。
勃格维克 拥有超过 10000 种磨损零件的模具,以适合世界上最受欢迎的破碎机。我们的模具涵盖颚式破碎机、圆锥破碎机、旋回破碎机、辊式破碎机、锤式破碎机、卧式冲击破碎机和立轴式冲击破碎机。无论您需求什么类型的易损件,勃格维克可能已经有此零件的模具。
我们相信与客户携手合作,开发解决方案,利用我们的实践经验、内部工程和冶金能力以及制造能力,提供满足客户需求的完整解决方案。
立即联系我们,了解我们如何帮助延长使用寿命、提高吞吐量、优化供应链并降低总拥有成本。
Suitable for SANDVIK Crusher Liners
Shanghai Bogvik Wear Material Co., Ltd is one of the most professional crusher parts manufacturer and distributor. We major supply crusher wear parts from 5kgs to 10000kgs in a broad variety of Managnese steel crusher wear parts and alloys steel and chromium iron, Ceramic Insert hammers or blow bars ,Titanium Carbide Insert Liners and crusher spare parts of famous crusher brand .
Wear and spare parts are at the heart of BOGVIK business and we are continually driven to find new and improved ways to optimize component life and equipment performance.
Depending on the application & our clients requirements we offer a range of manganese steel wear parts including Manganese13%, Manganese18% and Manganese22% all with or without chrome & / or molybdenum additions. All manganese liners supplied by BOGVIK are made to our own internal material specifications which are for more stringent than “standard” foundry material specifications.
BOGVIK has in excess of 10000 wear part patterns to fit the world’s most popular crushers. Our patterns cover jaw crushers, cone crushers, gyratory crushers, roll crushers, hammer crushers, horizontal shaft impactors and vertical shaft impactors. No matter what your requirements are, BOGVIK probably already has existing patterns for the wear parts.
We believe in collaboration and work hand-in-hand with our customers to develop solutions that leverages our practical experience, in-house engineering & metallurgical capabilities and manufacturing capacity to provide a complete solution that meets our customer needs.
Contact us today to see how we can help extend service life, improve throughput, optimize supply chain and reduce the total cost of ownership.
sales@bogvik.com
中文:
上海勃格维克耐磨材料有限公司是国内最专业的破碎机配件制造商和经销商之一。我们主要供应从 5 公斤到 10000 公斤的各种锰钢破碎机磨损件和合金钢和铬铁、陶瓷插入锤或板锤、碳化钛插入衬板和著名破碎机品牌的破碎机备件。
磨损和备件是勃格维克 业务的核心,我们不断寻求新的和改进的方法来优化部件寿命和设备性能。
根据应用和我们客户的要求,我们提供一系列锰钢耐磨部件,包括锰13%、锰18% 和锰22%,均添加或不添加铬和/或钼。勃格维克 提供的所有锰衬板均按照我们自己的内部材料规格制造,这些规格比“标准”铸造材料规格更严格。
勃格维克 拥有超过 10000 种磨损零件的模具,以适合世界上最受欢迎的破碎机。我们的模具涵盖颚式破碎机、圆锥破碎机、旋回破碎机、辊式破碎机、锤式破碎机、卧式冲击破碎机和立轴式冲击破碎机。无论您需求什么类型的易损件,勃格维克可能已经有此零件的模具。
我们相信与客户携手合作,开发解决方案,利用我们的实践经验、内部工程和冶金能力以及制造能力,提供满足客户需求的完整解决方案。
立即联系我们,了解我们如何帮助延长使用寿命、提高吞吐量、优化供应链并降低总拥有成本。
12 tic insert liners double the service lifeFernando Zhang
Why is TIC Liner more wearable?
A. The structure and properties of the matrix of the parts have changed. We have increased the content of Mn, Mo, and rare earth.
Therefore, the metallographic grain size of Hadfield steel is refined and the strength is enhanced.
B. The hardness of TIC Insert exceeds HRC60, and the hardness is about 3 times that of Hadfield steel!
The arrangement of Fine Chamber is almost the same as that of rough Chamber. According to the structure of the casting, Feed Size, make some small adjustments, there is no major change.
C. TIC Insert is a mesh-like structure, which is divided into points on the wear part, so as to achieve the purpose of improving the wear resistance of the part as a whole.
For TIC design, our engineers once again improved the design based on the wear curve of the parts you provided.
The size of the ore entering the Fine Chamber is very small, so we reduced the diameter and arrangement spacing of the TIC in order to obtain the best wear effect.
I share these ideas with you to let you fully understand the in-depth research we have done in this project.
Every new project is full of challenges and unknowns, but we are willing to challenge some interesting & valuable projects together with new customer.
How to solve the problem of excessive wear on both ends of Jaw liners? This is a classic case
One of our customers is in Shandong Province, China, and they have 2 crushers to crush iron ore.
One is 36X48 Jaw Crusher
One is 42X54 Jaw Crusher
We are told by customers that when they use OEM Liners, both ends of the Liners wear out very quickly! So productivity quickly dropped.
We filled the two ends of the teeth for our customers, and inlaid a lot of TIC Inserts at both ends.
The service life of the improved Liners is 3.68 times that of OEM Liners!
The customer was very satisfied with this and gave BOGVIK all their orders for Liners from dozens of sites in China
10 one of bogvik’s strongest product categories is plates made of manganese s...Fernando Zhang
One of Bogvik’s strongest product categories is plates made of manganese steel for jaw crushers.
This year, BOGVIK launched a new product — BOGVIK TIC plates. These are linings made of the standard alloys C, D and D1 but are reinforced with titanium carbide inserts. They show higher resistance to shock loads and cracking. This effect is achieved by special casting processes and heat treatment of the finished product, and the base alloy is selected in accordance with a rock type.
During the tests, the linings with inserts boasted an operating time that was 1.5 to 4 times more than that of classic manganese steel wear parts without inserts.
If you seek solutions to increase the intervals between plate replacement, reduce the number of maintenance stops, and lower your unit production costs — BOGVIK is what you need.
Contact our crushing&screening department to request individual solutions at: sales@bogvik.com
Ready to ship to the U.S.
Ready to ship to the U.S.
A reliable manufacturer of spare and wear parts and a supplier of engineering solutions for mining and construction equipment
sales@bogvik.com
Jaquess 36X48 Jaw
Our Customer would like to fill both ends to 18" F.I.E.
Just like in the photo, this design will be more durable。
If the crusher operates in very abrasive conditions at a very tight css then bottom of the jaws wear very quickly, fill jaw at both ends will help. But when you crush rock it expands by volume, corrugations allow this to occur, with this type of jaw enormous stress is transferred into the lower jaw frame and pitman/ bearings.
If rock is abrasive and soft no big deal, if its abrasive and tough, it can cause big issues.
We saw this problem with 50X60 Jaw at Huzhou quarry outside Shanghai.
So if possible good to know actual application and type of rock to decide best option.
Nip angle in crushing chamber is very important, smaller the better which is why thicker jaws with curve are requested by many people.
Kleemann Crusher Liners
MCO9 Crusher Liners
Crushing cone standard Cone S Part No. 2450546
Crushing shell standard fine Shell SF Part No. 2450551
MCO9 Crusher Liners
Crushing cone standard Cone S Part No. 2295672
Crushing shell standard medium Shell SM 2295649
C125 1P Quarry Type Jaw Plate
N11954343 JAW, FIXED QUARRY 1P 40mm Thick
N11954353 JAW MVBL QUARRY 1P Standard
It is suitable for quarry, and the use time is longer than OEM standard!
Contact BOGVIK for a quote: sales@bogvik.com
Shanghai Bogvik Wear Material Co., Ltd is one of the most professional crusher parts manufacturer and distributor. We major supply crusher wear parts from 5kgs to 10000kgs in a broad variety of Managnese steel crusher wear parts and alloys steel and chromium iron, Ceramic Insert hammers or blow bars ,Titanium Carbide Insert Liners and crusher spare parts of famous crusher brand .
Wear and spare parts are at the heart of BOGVIK business and we are continually driven to find new and improved ways to optimize component life and equipment performance.
Depending on the application & our clients requirements we offer a range of manganese steel wear parts including Manganese13%, Manganese18% and Manganese22% all with or without chrome & / or molybdenum additions. All manganese liners supplied by BOGVIK are made to our own internal material specifications which are for more stringent than “standard” foundry material specifications.
BOGVIK has in excess of 10000 wear part patterns to fit the world’s most popular crushers. Our patterns cover jaw crushers, cone crushers, gyratory crushers, roll crushers, hammer crushers, horizontal shaft impactors and vertical shaft impactors. No matter what your requirements are, BOGVIK probably already has existing patterns for the wear parts.
We believe in collaboration and work hand-in-hand with our customers to develop solutions that leverages our practical experience, in-house engineering & metallurgical capabilities and manufacturing capacity to provide a complete solution that meets our customer needs.
Contact us today to see how we can help extend service life, improve throughput, optimize supply chain and reduce the total cost of ownership.
sales@bogvik.com
上海勃格维克耐磨材料有限公司是国内最专业的破碎机配件制造商和经销商之一。我们主要供应从 5 公斤到 10000 公斤的各种锰钢破碎机磨损件和合金钢和铬铁、陶瓷插入锤或板锤、碳化钛插入衬板和著名破碎机品牌的破碎机备件。
磨损和备件是勃格维克 业务的核心,我们不断寻求新的和改进的方法来优化部件寿命和设备性能。
根据应用和我们客户的要求,我们提供一系列锰钢耐磨部件,包括锰13%、锰18% 和锰22%,均添加或不添加铬和/或钼。勃格维克 提供的所有锰衬板均按照我们自己的内部材料规格制造,这些规格比“标准”铸造材料规格更严格。
勃格维克 拥有超过 10000 种磨损零件的模具,以适合世界上最受欢迎的破碎机。我们的模具涵盖颚式破碎机、圆锥破碎机、旋回破碎机、辊式破碎机、锤式破碎机、卧式冲击破碎机和立轴式冲击破碎机。无论您需求什么类型的易损件,勃格维克可能已经有此零件的模具。
我们相信与客户携手合作,开发解决方案,利用我们的实践经验、内部工程和冶金能力以及制造能力,提供满足客户需求的完整解决方案。
立即联系我们,了解我们如何帮助延长使用寿命、提高吞吐量、优化供应链并降低总拥有成本。
MP1000 New Design
Mantle SPE STD F OS MX2 MM1564689 6284KG/PCS
Bowl Liners STD F MM1603957 5912KG/PCS
Original Equipment Replacement MP1000 Cone Crusher Parts
High quality cone crusher parts are a perfect fit
TIC Insert Jaw Crusher Wear Parts Manufacturer
BOGVIK has improved our customer Crusher Liners by TIC (titanium carbide) insert. BOGVIK TIC insert Crusher Liners are designed to improve efficiency and reduce costs by extending wear life and minimizing downtime. Compare with normal manganese crusher liners, our TIC insert wear parts span life can be 2-3 times. Based on our customer feedback, the more hard material to crush, the longer span life.
Benefits
2-3 times span life than normal manganese Crusher Liners
TIC insert Crusher Liners can decrease your plant downtime
Higher cost performance compare with normal manganese Crusher Liners
More easily to install
Original equipment replacement MP1000 cone crusher parts ensure proper fit, form and function to reduce maintenance issues and increase longevity. If your equipment fails, productivity of your entire plant is at risk. To avoid such losses, you must be sure critical replacement parts are readily available when you need them.
BOGVIK provides a complete offering, for both standard and engineered-to-order parts, ensuring you have the availability and support required. We provide flexible options to secure parts on a one-time basis, as a turn-key service, or anywhere in between.
Wear parts
Feed cone
Main frame liners
Mantle liners
Bowl liners
Protection cones
Arm guards
This document provides part numbers, descriptions, and weights for various components of mining and quarry equipment. It lists movable and fixed jaw plates for a quarry, as well as assemblies, belts, seals, pipes, screws, pins and other parts with specifications. The total number of parts listed is over 500.
01 bogvik customizes the sandvik ch550 for customers with different chamber l...Fernando Zhang
BOGVIK customizes the CH550 for customers with different Chamber liners
CH550 CONCAVE F 452.8600-001
CH550 MANTLE B 452.8602-001
CH550 CONCAVE EC TOP GRIP 452.7843-001
CH550 MANTLE A 452.7626-001
CH550 CONCAVE C 452.8500-001
CH550 FILLER RING C 452.7388-001
CH550 CONCAVE MC 452.8496-001
CH550 CONCAVE M 452.8601-001
CH550 FILLER RING M 452.7386-001
CH550 MANTLE FF BG00133846-01
Hi Morning!
BOGVIK has in excess of 10000 wear part patterns to fit the world’s most popular crushers. Our patterns cover jaw crushers, cone crushers, gyratory crushers, roll crushers, hammer crushers, horizontal shaft impactors and vertical shaft impactors. No matter what your requirements are, BOGVIK probably already has existing patterns for the wear parts.
Depending on the application & our clients requirements we offer a range of manganese steel wear parts including Mn13%, Mn18% and Mn22% all with or without chrome & / or molybdenum additions. All manganese liners supplied by BOGVIK are made to our own internal material specifications which are for more stringent than “standard” foundry material specifications.
Dear Valued BOGVIK Customers,
We have already come back to the office after enjoying a pleasant CNY holiday. All orders can be proceeded as scheduled.
Any new inquiry, Kindly feel free to contact me.
Looking forward to further cooperation in 2021.
Rgeards
Fernando
Bogvik is a major supplier of crusher wear parts since 1996, with over 10,000 patterns to fit most popular crushers including jaw, cone, gyratory, roll, hammer, horizontal shaft and vertical shaft impactors. They offer manganese steel wear parts in various compositions to meet application and client requirements. Bogvik prides itself on collaborating with customers to develop customized solutions that optimize component life and equipment performance by leveraging their engineering expertise and manufacturing capabilities.
Wear and spare parts are at the heart of BOGVIK business and we are continually driven to find new and improved ways to optimize component life and equipment performance.
We believe in collaboration and work hand-in-hand with our customers to develop solutions that leverages our practical experience, in-house engineering & metallurgical capabilities and manufacturing capacity to provide a complete solution that meets our customer needs.
Contact us today to see how we can help extend service life, improve throughput, optimize supply chain and reduce the total cost of ownership.
Wear and spare parts are at the heart of BOGVIK business and we are continually driven to find new and improved ways to optimize component life and equipment performance.
We believe in collaboration and work hand-in-hand with our customers to develop solutions that leverages our practical experience, in-house engineering & metallurgical capabilities and manufacturing capacity to provide a complete solution that meets our customer needs.
Contact us today to see how we can help extend service life, improve throughput, optimize supply chain and reduce the total cost of ownership.
Wear and spare parts are at the heart of BOGVIK business and we are continually driven to find new and improved ways to optimize component life and equipment performance.
We believe in collaboration and work hand-in-hand with our customers to develop solutions that leverages our practical experience, in-house engineering & metallurgical capabilities and manufacturing capacity to provide a complete solution that meets our customer needs.
Contact us today to see how we can help extend service life, improve throughput, optimize supply chain and reduce the total cost of ownership.
Embedded machine learning-based road conditions and driving behavior monitoringIJECEIAES
Car accident rates have increased in recent years, resulting in losses in human lives, properties, and other financial costs. An embedded machine learning-based system is developed to address this critical issue. The system can monitor road conditions, detect driving patterns, and identify aggressive driving behaviors. The system is based on neural networks trained on a comprehensive dataset of driving events, driving styles, and road conditions. The system effectively detects potential risks and helps mitigate the frequency and impact of accidents. The primary goal is to ensure the safety of drivers and vehicles. Collecting data involved gathering information on three key road events: normal street and normal drive, speed bumps, circular yellow speed bumps, and three aggressive driving actions: sudden start, sudden stop, and sudden entry. The gathered data is processed and analyzed using a machine learning system designed for limited power and memory devices. The developed system resulted in 91.9% accuracy, 93.6% precision, and 92% recall. The achieved inference time on an Arduino Nano 33 BLE Sense with a 32-bit CPU running at 64 MHz is 34 ms and requires 2.6 kB peak RAM and 139.9 kB program flash memory, making it suitable for resource-constrained embedded systems.
Shanghai Bogvik Wear Material Co., Ltd is one of the most professional crusher parts manufacturer and distributor. We major supply crusher wear parts from 5kgs to 10000kgs in a broad variety of Managnese steel crusher wear parts and alloys steel and chromium iron, Ceramic Insert hammers or blow bars ,Titanium Carbide Insert Liners and crusher spare parts of famous crusher brand .
Wear and spare parts are at the heart of BOGVIK business and we are continually driven to find new and improved ways to optimize component life and equipment performance.
Depending on the application & our clients requirements we offer a range of manganese steel wear parts including Manganese13%, Manganese18% and Manganese22% all with or without chrome & / or molybdenum additions. All manganese liners supplied by BOGVIK are made to our own internal material specifications which are for more stringent than “standard” foundry material specifications.
BOGVIK has in excess of 10000 wear part patterns to fit the world’s most popular crushers. Our patterns cover jaw crushers, cone crushers, gyratory crushers, roll crushers, hammer crushers, horizontal shaft impactors and vertical shaft impactors. No matter what your requirements are, BOGVIK probably already has existing patterns for the wear parts.
We believe in collaboration and work hand-in-hand with our customers to develop solutions that leverages our practical experience, in-house engineering & metallurgical capabilities and manufacturing capacity to provide a complete solution that meets our customer needs.
Contact us today to see how we can help extend service life, improve throughput, optimize supply chain and reduce the total cost of ownership.
sales@bogvik.com
中文:
上海勃格维克耐磨材料有限公司是国内最专业的破碎机配件制造商和经销商之一。我们主要供应从 5 公斤到 10000 公斤的各种锰钢破碎机磨损件和合金钢和铬铁、陶瓷插入锤或板锤、碳化钛插入衬板和著名破碎机品牌的破碎机备件。
磨损和备件是勃格维克 业务的核心,我们不断寻求新的和改进的方法来优化部件寿命和设备性能。
根据应用和我们客户的要求,我们提供一系列锰钢耐磨部件,包括锰13%、锰18% 和锰22%,均添加或不添加铬和/或钼。勃格维克 提供的所有锰衬板均按照我们自己的内部材料规格制造,这些规格比“标准”铸造材料规格更严格。
勃格维克 拥有超过 10000 种磨损零件的模具,以适合世界上最受欢迎的破碎机。我们的模具涵盖颚式破碎机、圆锥破碎机、旋回破碎机、辊式破碎机、锤式破碎机、卧式冲击破碎机和立轴式冲击破碎机。无论您需求什么类型的易损件,勃格维克可能已经有此零件的模具。
我们相信与客户携手合作,开发解决方案,利用我们的实践经验、内部工程和冶金能力以及制造能力,提供满足客户需求的完整解决方案。
立即联系我们,了解我们如何帮助延长使用寿命、提高吞吐量、优化供应链并降低总拥有成本。
Suitable for SANDVIK Crusher Liners
Shanghai Bogvik Wear Material Co., Ltd is one of the most professional crusher parts manufacturer and distributor. We major supply crusher wear parts from 5kgs to 10000kgs in a broad variety of Managnese steel crusher wear parts and alloys steel and chromium iron, Ceramic Insert hammers or blow bars ,Titanium Carbide Insert Liners and crusher spare parts of famous crusher brand .
Wear and spare parts are at the heart of BOGVIK business and we are continually driven to find new and improved ways to optimize component life and equipment performance.
Depending on the application & our clients requirements we offer a range of manganese steel wear parts including Manganese13%, Manganese18% and Manganese22% all with or without chrome & / or molybdenum additions. All manganese liners supplied by BOGVIK are made to our own internal material specifications which are for more stringent than “standard” foundry material specifications.
BOGVIK has in excess of 10000 wear part patterns to fit the world’s most popular crushers. Our patterns cover jaw crushers, cone crushers, gyratory crushers, roll crushers, hammer crushers, horizontal shaft impactors and vertical shaft impactors. No matter what your requirements are, BOGVIK probably already has existing patterns for the wear parts.
We believe in collaboration and work hand-in-hand with our customers to develop solutions that leverages our practical experience, in-house engineering & metallurgical capabilities and manufacturing capacity to provide a complete solution that meets our customer needs.
Contact us today to see how we can help extend service life, improve throughput, optimize supply chain and reduce the total cost of ownership.
sales@bogvik.com
中文:
上海勃格维克耐磨材料有限公司是国内最专业的破碎机配件制造商和经销商之一。我们主要供应从 5 公斤到 10000 公斤的各种锰钢破碎机磨损件和合金钢和铬铁、陶瓷插入锤或板锤、碳化钛插入衬板和著名破碎机品牌的破碎机备件。
磨损和备件是勃格维克 业务的核心,我们不断寻求新的和改进的方法来优化部件寿命和设备性能。
根据应用和我们客户的要求,我们提供一系列锰钢耐磨部件,包括锰13%、锰18% 和锰22%,均添加或不添加铬和/或钼。勃格维克 提供的所有锰衬板均按照我们自己的内部材料规格制造,这些规格比“标准”铸造材料规格更严格。
勃格维克 拥有超过 10000 种磨损零件的模具,以适合世界上最受欢迎的破碎机。我们的模具涵盖颚式破碎机、圆锥破碎机、旋回破碎机、辊式破碎机、锤式破碎机、卧式冲击破碎机和立轴式冲击破碎机。无论您需求什么类型的易损件,勃格维克可能已经有此零件的模具。
我们相信与客户携手合作,开发解决方案,利用我们的实践经验、内部工程和冶金能力以及制造能力,提供满足客户需求的完整解决方案。
立即联系我们,了解我们如何帮助延长使用寿命、提高吞吐量、优化供应链并降低总拥有成本。
12 tic insert liners double the service lifeFernando Zhang
Why is TIC Liner more wearable?
A. The structure and properties of the matrix of the parts have changed. We have increased the content of Mn, Mo, and rare earth.
Therefore, the metallographic grain size of Hadfield steel is refined and the strength is enhanced.
B. The hardness of TIC Insert exceeds HRC60, and the hardness is about 3 times that of Hadfield steel!
The arrangement of Fine Chamber is almost the same as that of rough Chamber. According to the structure of the casting, Feed Size, make some small adjustments, there is no major change.
C. TIC Insert is a mesh-like structure, which is divided into points on the wear part, so as to achieve the purpose of improving the wear resistance of the part as a whole.
For TIC design, our engineers once again improved the design based on the wear curve of the parts you provided.
The size of the ore entering the Fine Chamber is very small, so we reduced the diameter and arrangement spacing of the TIC in order to obtain the best wear effect.
I share these ideas with you to let you fully understand the in-depth research we have done in this project.
Every new project is full of challenges and unknowns, but we are willing to challenge some interesting & valuable projects together with new customer.
How to solve the problem of excessive wear on both ends of Jaw liners? This is a classic case
One of our customers is in Shandong Province, China, and they have 2 crushers to crush iron ore.
One is 36X48 Jaw Crusher
One is 42X54 Jaw Crusher
We are told by customers that when they use OEM Liners, both ends of the Liners wear out very quickly! So productivity quickly dropped.
We filled the two ends of the teeth for our customers, and inlaid a lot of TIC Inserts at both ends.
The service life of the improved Liners is 3.68 times that of OEM Liners!
The customer was very satisfied with this and gave BOGVIK all their orders for Liners from dozens of sites in China
10 one of bogvik’s strongest product categories is plates made of manganese s...Fernando Zhang
One of Bogvik’s strongest product categories is plates made of manganese steel for jaw crushers.
This year, BOGVIK launched a new product — BOGVIK TIC plates. These are linings made of the standard alloys C, D and D1 but are reinforced with titanium carbide inserts. They show higher resistance to shock loads and cracking. This effect is achieved by special casting processes and heat treatment of the finished product, and the base alloy is selected in accordance with a rock type.
During the tests, the linings with inserts boasted an operating time that was 1.5 to 4 times more than that of classic manganese steel wear parts without inserts.
If you seek solutions to increase the intervals between plate replacement, reduce the number of maintenance stops, and lower your unit production costs — BOGVIK is what you need.
Contact our crushing&screening department to request individual solutions at: sales@bogvik.com
Ready to ship to the U.S.
Ready to ship to the U.S.
A reliable manufacturer of spare and wear parts and a supplier of engineering solutions for mining and construction equipment
sales@bogvik.com
Jaquess 36X48 Jaw
Our Customer would like to fill both ends to 18" F.I.E.
Just like in the photo, this design will be more durable。
If the crusher operates in very abrasive conditions at a very tight css then bottom of the jaws wear very quickly, fill jaw at both ends will help. But when you crush rock it expands by volume, corrugations allow this to occur, with this type of jaw enormous stress is transferred into the lower jaw frame and pitman/ bearings.
If rock is abrasive and soft no big deal, if its abrasive and tough, it can cause big issues.
We saw this problem with 50X60 Jaw at Huzhou quarry outside Shanghai.
So if possible good to know actual application and type of rock to decide best option.
Nip angle in crushing chamber is very important, smaller the better which is why thicker jaws with curve are requested by many people.
Kleemann Crusher Liners
MCO9 Crusher Liners
Crushing cone standard Cone S Part No. 2450546
Crushing shell standard fine Shell SF Part No. 2450551
MCO9 Crusher Liners
Crushing cone standard Cone S Part No. 2295672
Crushing shell standard medium Shell SM 2295649
C125 1P Quarry Type Jaw Plate
N11954343 JAW, FIXED QUARRY 1P 40mm Thick
N11954353 JAW MVBL QUARRY 1P Standard
It is suitable for quarry, and the use time is longer than OEM standard!
Contact BOGVIK for a quote: sales@bogvik.com
Shanghai Bogvik Wear Material Co., Ltd is one of the most professional crusher parts manufacturer and distributor. We major supply crusher wear parts from 5kgs to 10000kgs in a broad variety of Managnese steel crusher wear parts and alloys steel and chromium iron, Ceramic Insert hammers or blow bars ,Titanium Carbide Insert Liners and crusher spare parts of famous crusher brand .
Wear and spare parts are at the heart of BOGVIK business and we are continually driven to find new and improved ways to optimize component life and equipment performance.
Depending on the application & our clients requirements we offer a range of manganese steel wear parts including Manganese13%, Manganese18% and Manganese22% all with or without chrome & / or molybdenum additions. All manganese liners supplied by BOGVIK are made to our own internal material specifications which are for more stringent than “standard” foundry material specifications.
BOGVIK has in excess of 10000 wear part patterns to fit the world’s most popular crushers. Our patterns cover jaw crushers, cone crushers, gyratory crushers, roll crushers, hammer crushers, horizontal shaft impactors and vertical shaft impactors. No matter what your requirements are, BOGVIK probably already has existing patterns for the wear parts.
We believe in collaboration and work hand-in-hand with our customers to develop solutions that leverages our practical experience, in-house engineering & metallurgical capabilities and manufacturing capacity to provide a complete solution that meets our customer needs.
Contact us today to see how we can help extend service life, improve throughput, optimize supply chain and reduce the total cost of ownership.
sales@bogvik.com
上海勃格维克耐磨材料有限公司是国内最专业的破碎机配件制造商和经销商之一。我们主要供应从 5 公斤到 10000 公斤的各种锰钢破碎机磨损件和合金钢和铬铁、陶瓷插入锤或板锤、碳化钛插入衬板和著名破碎机品牌的破碎机备件。
磨损和备件是勃格维克 业务的核心,我们不断寻求新的和改进的方法来优化部件寿命和设备性能。
根据应用和我们客户的要求,我们提供一系列锰钢耐磨部件,包括锰13%、锰18% 和锰22%,均添加或不添加铬和/或钼。勃格维克 提供的所有锰衬板均按照我们自己的内部材料规格制造,这些规格比“标准”铸造材料规格更严格。
勃格维克 拥有超过 10000 种磨损零件的模具,以适合世界上最受欢迎的破碎机。我们的模具涵盖颚式破碎机、圆锥破碎机、旋回破碎机、辊式破碎机、锤式破碎机、卧式冲击破碎机和立轴式冲击破碎机。无论您需求什么类型的易损件,勃格维克可能已经有此零件的模具。
我们相信与客户携手合作,开发解决方案,利用我们的实践经验、内部工程和冶金能力以及制造能力,提供满足客户需求的完整解决方案。
立即联系我们,了解我们如何帮助延长使用寿命、提高吞吐量、优化供应链并降低总拥有成本。
MP1000 New Design
Mantle SPE STD F OS MX2 MM1564689 6284KG/PCS
Bowl Liners STD F MM1603957 5912KG/PCS
Original Equipment Replacement MP1000 Cone Crusher Parts
High quality cone crusher parts are a perfect fit
TIC Insert Jaw Crusher Wear Parts Manufacturer
BOGVIK has improved our customer Crusher Liners by TIC (titanium carbide) insert. BOGVIK TIC insert Crusher Liners are designed to improve efficiency and reduce costs by extending wear life and minimizing downtime. Compare with normal manganese crusher liners, our TIC insert wear parts span life can be 2-3 times. Based on our customer feedback, the more hard material to crush, the longer span life.
Benefits
2-3 times span life than normal manganese Crusher Liners
TIC insert Crusher Liners can decrease your plant downtime
Higher cost performance compare with normal manganese Crusher Liners
More easily to install
Original equipment replacement MP1000 cone crusher parts ensure proper fit, form and function to reduce maintenance issues and increase longevity. If your equipment fails, productivity of your entire plant is at risk. To avoid such losses, you must be sure critical replacement parts are readily available when you need them.
BOGVIK provides a complete offering, for both standard and engineered-to-order parts, ensuring you have the availability and support required. We provide flexible options to secure parts on a one-time basis, as a turn-key service, or anywhere in between.
Wear parts
Feed cone
Main frame liners
Mantle liners
Bowl liners
Protection cones
Arm guards
This document provides part numbers, descriptions, and weights for various components of mining and quarry equipment. It lists movable and fixed jaw plates for a quarry, as well as assemblies, belts, seals, pipes, screws, pins and other parts with specifications. The total number of parts listed is over 500.
01 bogvik customizes the sandvik ch550 for customers with different chamber l...Fernando Zhang
BOGVIK customizes the CH550 for customers with different Chamber liners
CH550 CONCAVE F 452.8600-001
CH550 MANTLE B 452.8602-001
CH550 CONCAVE EC TOP GRIP 452.7843-001
CH550 MANTLE A 452.7626-001
CH550 CONCAVE C 452.8500-001
CH550 FILLER RING C 452.7388-001
CH550 CONCAVE MC 452.8496-001
CH550 CONCAVE M 452.8601-001
CH550 FILLER RING M 452.7386-001
CH550 MANTLE FF BG00133846-01
Hi Morning!
BOGVIK has in excess of 10000 wear part patterns to fit the world’s most popular crushers. Our patterns cover jaw crushers, cone crushers, gyratory crushers, roll crushers, hammer crushers, horizontal shaft impactors and vertical shaft impactors. No matter what your requirements are, BOGVIK probably already has existing patterns for the wear parts.
Depending on the application & our clients requirements we offer a range of manganese steel wear parts including Mn13%, Mn18% and Mn22% all with or without chrome & / or molybdenum additions. All manganese liners supplied by BOGVIK are made to our own internal material specifications which are for more stringent than “standard” foundry material specifications.
Dear Valued BOGVIK Customers,
We have already come back to the office after enjoying a pleasant CNY holiday. All orders can be proceeded as scheduled.
Any new inquiry, Kindly feel free to contact me.
Looking forward to further cooperation in 2021.
Rgeards
Fernando
Bogvik is a major supplier of crusher wear parts since 1996, with over 10,000 patterns to fit most popular crushers including jaw, cone, gyratory, roll, hammer, horizontal shaft and vertical shaft impactors. They offer manganese steel wear parts in various compositions to meet application and client requirements. Bogvik prides itself on collaborating with customers to develop customized solutions that optimize component life and equipment performance by leveraging their engineering expertise and manufacturing capabilities.
Wear and spare parts are at the heart of BOGVIK business and we are continually driven to find new and improved ways to optimize component life and equipment performance.
We believe in collaboration and work hand-in-hand with our customers to develop solutions that leverages our practical experience, in-house engineering & metallurgical capabilities and manufacturing capacity to provide a complete solution that meets our customer needs.
Contact us today to see how we can help extend service life, improve throughput, optimize supply chain and reduce the total cost of ownership.
Wear and spare parts are at the heart of BOGVIK business and we are continually driven to find new and improved ways to optimize component life and equipment performance.
We believe in collaboration and work hand-in-hand with our customers to develop solutions that leverages our practical experience, in-house engineering & metallurgical capabilities and manufacturing capacity to provide a complete solution that meets our customer needs.
Contact us today to see how we can help extend service life, improve throughput, optimize supply chain and reduce the total cost of ownership.
Wear and spare parts are at the heart of BOGVIK business and we are continually driven to find new and improved ways to optimize component life and equipment performance.
We believe in collaboration and work hand-in-hand with our customers to develop solutions that leverages our practical experience, in-house engineering & metallurgical capabilities and manufacturing capacity to provide a complete solution that meets our customer needs.
Contact us today to see how we can help extend service life, improve throughput, optimize supply chain and reduce the total cost of ownership.
Embedded machine learning-based road conditions and driving behavior monitoringIJECEIAES
Car accident rates have increased in recent years, resulting in losses in human lives, properties, and other financial costs. An embedded machine learning-based system is developed to address this critical issue. The system can monitor road conditions, detect driving patterns, and identify aggressive driving behaviors. The system is based on neural networks trained on a comprehensive dataset of driving events, driving styles, and road conditions. The system effectively detects potential risks and helps mitigate the frequency and impact of accidents. The primary goal is to ensure the safety of drivers and vehicles. Collecting data involved gathering information on three key road events: normal street and normal drive, speed bumps, circular yellow speed bumps, and three aggressive driving actions: sudden start, sudden stop, and sudden entry. The gathered data is processed and analyzed using a machine learning system designed for limited power and memory devices. The developed system resulted in 91.9% accuracy, 93.6% precision, and 92% recall. The achieved inference time on an Arduino Nano 33 BLE Sense with a 32-bit CPU running at 64 MHz is 34 ms and requires 2.6 kB peak RAM and 139.9 kB program flash memory, making it suitable for resource-constrained embedded systems.
Using recycled concrete aggregates (RCA) for pavements is crucial to achieving sustainability. Implementing RCA for new pavement can minimize carbon footprint, conserve natural resources, reduce harmful emissions, and lower life cycle costs. Compared to natural aggregate (NA), RCA pavement has fewer comprehensive studies and sustainability assessments.
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECTjpsjournal1
The rivalry between prominent international actors for dominance over Central Asia's hydrocarbon
reserves and the ancient silk trade route, along with China's diplomatic endeavours in the area, has been
referred to as the "New Great Game." This research centres on the power struggle, considering
geopolitical, geostrategic, and geoeconomic variables. Topics including trade, political hegemony, oil
politics, and conventional and nontraditional security are all explored and explained by the researcher.
Using Mackinder's Heartland, Spykman Rimland, and Hegemonic Stability theories, examines China's role
in Central Asia. This study adheres to the empirical epistemological method and has taken care of
objectivity. This study analyze primary and secondary research documents critically to elaborate role of
china’s geo economic outreach in central Asian countries and its future prospect. China is thriving in trade,
pipeline politics, and winning states, according to this study, thanks to important instruments like the
Shanghai Cooperation Organisation and the Belt and Road Economic Initiative. According to this study,
China is seeing significant success in commerce, pipeline politics, and gaining influence on other
governments. This success may be attributed to the effective utilisation of key tools such as the Shanghai
Cooperation Organisation and the Belt and Road Economic Initiative.
Batteries -Introduction – Types of Batteries – discharging and charging of battery - characteristics of battery –battery rating- various tests on battery- – Primary battery: silver button cell- Secondary battery :Ni-Cd battery-modern battery: lithium ion battery-maintenance of batteries-choices of batteries for electric vehicle applications.
Fuel Cells: Introduction- importance and classification of fuel cells - description, principle, components, applications of fuel cells: H2-O2 fuel cell, alkaline fuel cell, molten carbonate fuel cell and direct methanol fuel cells.
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...IJECEIAES
Climate change's impact on the planet forced the United Nations and governments to promote green energies and electric transportation. The deployments of photovoltaic (PV) and electric vehicle (EV) systems gained stronger momentum due to their numerous advantages over fossil fuel types. The advantages go beyond sustainability to reach financial support and stability. The work in this paper introduces the hybrid system between PV and EV to support industrial and commercial plants. This paper covers the theoretical framework of the proposed hybrid system including the required equation to complete the cost analysis when PV and EV are present. In addition, the proposed design diagram which sets the priorities and requirements of the system is presented. The proposed approach allows setup to advance their power stability, especially during power outages. The presented information supports researchers and plant owners to complete the necessary analysis while promoting the deployment of clean energy. The result of a case study that represents a dairy milk farmer supports the theoretical works and highlights its advanced benefits to existing plants. The short return on investment of the proposed approach supports the paper's novelty approach for the sustainable electrical system. In addition, the proposed system allows for an isolated power setup without the need for a transmission line which enhances the safety of the electrical network
Understanding Inductive Bias in Machine LearningSUTEJAS
This presentation explores the concept of inductive bias in machine learning. It explains how algorithms come with built-in assumptions and preferences that guide the learning process. You'll learn about the different types of inductive bias and how they can impact the performance and generalizability of machine learning models.
The presentation also covers the positive and negative aspects of inductive bias, along with strategies for mitigating potential drawbacks. We'll explore examples of how bias manifests in algorithms like neural networks and decision trees.
By understanding inductive bias, you can gain valuable insights into how machine learning models work and make informed decisions when building and deploying them.
Comparative analysis between traditional aquaponics and reconstructed aquapon...bijceesjournal
The aquaponic system of planting is a method that does not require soil usage. It is a method that only needs water, fish, lava rocks (a substitute for soil), and plants. Aquaponic systems are sustainable and environmentally friendly. Its use not only helps to plant in small spaces but also helps reduce artificial chemical use and minimizes excess water use, as aquaponics consumes 90% less water than soil-based gardening. The study applied a descriptive and experimental design to assess and compare conventional and reconstructed aquaponic methods for reproducing tomatoes. The researchers created an observation checklist to determine the significant factors of the study. The study aims to determine the significant difference between traditional aquaponics and reconstructed aquaponics systems propagating tomatoes in terms of height, weight, girth, and number of fruits. The reconstructed aquaponics system’s higher growth yield results in a much more nourished crop than the traditional aquaponics system. It is superior in its number of fruits, height, weight, and girth measurement. Moreover, the reconstructed aquaponics system is proven to eliminate all the hindrances present in the traditional aquaponics system, which are overcrowding of fish, algae growth, pest problems, contaminated water, and dead fish.
Manufacturing Process of molasses based distillery ppt.pptx
Bogvik pattern list 26 lim
1. MANTLE HPT300.07-01
MANTLE HPT300.05-01B
MANTLE
MANTLE
MANTLE HPT300.07-01c1
MANTLE HPT300.05-01B
JAW PLATE HJ110.00-03
JAW PLATE HJ110.00-13
Ling
Ling
JAW PLATE HJ125.00-03
JAW PLATE HJ125.00-13
Ling HJ125.00-10
Ling HJ125.00-5
JAW PLATE
JAW PLATE
MANTLE HST315.02.06.01
MANTLE HST315.03.05
MANTLE HST315.02.06.04
MANTLE HST315.03.05
MANTLE HST315S.02.05
MANTLE HST315S 02-02
MANTLE HST315S-03-01
MANTLE HST315.02.06
MANTLE HST315.02.06
MANTLE HST315S-03-01
MANTLE HST250S 02-06
MANTLE HST250S 02-03
MANTLE HST250S 03-01
JAW PLATE PE900X1200.01-16
JAW PLATE PE900X1200.01-22
JAW PLATE PE900X1200.02-07
JAW PLATE PE900X1200.02-08
JAW PLATE
JAW PLATE
MANTLE
parts name Parts No.
PE900X1200
PE600X900
HST160S2
750x1060
HST315H1
HST315H2
HST315S1
HST315S2
HST250s2
Machine Type
HPT300C2老300
HPT300C2A新30
HPT300.07-01C1
HJ110
HJ125
SHANGHAI BOGVIK WEAR MATERIAL CO., LTD.
WWW.BOGVIK.COM
All manufacturers brands, names, part numbers, model numbers and descriptions are used for reference and
identification purposes only, they are owned by the respective manufacturers. BOGVIK has no affiliation with the
OEM.
w
w
w
.bogvik.com
E:sales@
bogvik.com
M
:+86
15851989372
2. MANTLE
MANTLE
MANTLE hst160.02-011
MANTLE hst160.03-05
MANTLE HPC220-08-01
MANTLE HPC220-04-01
JAW PLATE CJ1103-01-2
JAW PLATE CJ1103-02-2
Ling CJ1103-01-5/6
Ling CJ1103-01-3/4
固定压条 CJ1103-01-7
活动压条 CJ1103-02-7
动鄂护板 CJ1103-02-8
MANTLE HPT 500.05-01
MANTLE HPT 500.07-01
PEW860 JAW PLATE CJ0911-01-2
JAW PLATE CJ0911-02-1
压条1
压条2
上边护板
下边护板
1520 板锤 CI5X1520.01.04-15
HPT500C2
HST160S2
HST160h1
HPC220
PEW1100X1200
SHANGHAI BOGVIK WEAR MATERIAL CO., LTD.
WWW.BOGVIK.COM
All manufacturers brands, names, part numbers, model numbers and descriptions are used for reference and
identification purposes only, they are owned by the respective manufacturers. BOGVIK has no affiliation with the
OEM.
w
w
w
.bogvik.com
E:sales@
bogvik.com
M
:+86
15851989372
3. SHANGHAI BOGVIK WEAR MATERIAL CO., LTD.
WWW.BOGVIK.COM
All manufacturers brands, names, part numbers, model numbers and descriptions are used for reference and
identification purposes only, they are owned by the respective manufacturers. BOGVIK has no affiliation with the
OEM.
w
w
w
.bogvik.com
E:sales@
bogvik.com
M
:+86
15851989372
4. SHANGHAI BOGVIK WEAR MATERIAL CO., LTD.
WWW.BOGVIK.COM
All manufacturers brands, names, part numbers, model numbers and descriptions are used for reference and
identification purposes only, they are owned by the respective manufacturers. BOGVIK has no affiliation with the
OEM.
w
w
w
.bogvik.com
E:sales@
bogvik.com
M
:+86
15851989372
5. SHANGHAI BOGVIK WEAR MATERIAL CO., LTD.
WWW.BOGVIK.COM
All manufacturers brands, names, part numbers, model numbers and descriptions are used for reference and
identification purposes only, they are owned by the respective manufacturers. BOGVIK has no affiliation with the
OEM.
w
w
w
.bogvik.com
E:sales@
bogvik.com
M
:+86
15851989372
6. SHANGHAI BOGVIK WEAR MATERIAL CO., LTD.
WWW.BOGVIK.COM
All manufacturers brands, names, part numbers, model numbers and descriptions are used for reference and
identification purposes only, they are owned by the respective manufacturers. BOGVIK has no affiliation with the
OEM.
w
w
w
.bogvik.com
E:sales@
bogvik.com
M
:+86
15851989372
7. SHANGHAI BOGVIK WEAR MATERIAL CO., LTD.
WWW.BOGVIK.COM
All manufacturers brands, names, part numbers, model numbers and descriptions are used for reference and
identification purposes only, they are owned by the respective manufacturers. BOGVIK has no affiliation with the
OEM.
w
w
w
.bogvik.com
E:sales@
bogvik.com
M
:+86
15851989372
8. SHANGHAI BOGVIK WEAR MATERIAL CO., LTD.
WWW.BOGVIK.COM
All manufacturers brands, names, part numbers, model numbers and descriptions are used for reference and
identification purposes only, they are owned by the respective manufacturers. BOGVIK has no affiliation with the
OEM.
w
w
w
.bogvik.com
E:sales@
bogvik.com
M
:+86
15851989372
9. SHANGHAI BOGVIK WEAR MATERIAL CO., LTD.
WWW.BOGVIK.COM
All manufacturers brands, names, part numbers, model numbers and descriptions are used for reference and
identification purposes only, they are owned by the respective manufacturers. BOGVIK has no affiliation with the
OEM.
w
w
w
.bogvik.com
E:sales@
bogvik.com
M
:+86
15851989372
10. SHANGHAI BOGVIK WEAR MATERIAL CO., LTD.
WWW.BOGVIK.COM
All manufacturers brands, names, part numbers, model numbers and descriptions are used for reference and
identification purposes only, they are owned by the respective manufacturers. BOGVIK has no affiliation with the
OEM.
w
w
w
.bogvik.com
E:sales@
bogvik.com
M
:+86
15851989372
11. SHANGHAI BOGVIK WEAR MATERIAL CO., LTD.
WWW.BOGVIK.COM
All manufacturers brands, names, part numbers, model numbers and descriptions are used for reference and
identification purposes only, they are owned by the respective manufacturers. BOGVIK has no affiliation with the
OEM.
w
w
w
.bogvik.com
E:sales@
bogvik.com
M
:+86
15851989372
12. SHANGHAI BOGVIK WEAR MATERIAL CO., LTD.
WWW.BOGVIK.COM
All manufacturers brands, names, part numbers, model numbers and descriptions are used for reference and
identification purposes only, they are owned by the respective manufacturers. BOGVIK has no affiliation with the
OEM.
w
w
w
.bogvik.com
E:sales@
bogvik.com
M
:+86
15851989372
13. SHANGHAI BOGVIK WEAR MATERIAL CO., LTD.
WWW.BOGVIK.COM
All manufacturers brands, names, part numbers, model numbers and descriptions are used for reference and
identification purposes only, they are owned by the respective manufacturers. BOGVIK has no affiliation with the
OEM.
w
w
w
.bogvik.com
E:sales@
bogvik.com
M
:+86
15851989372
14. SHANGHAI BOGVIK WEAR MATERIAL CO., LTD.
WWW.BOGVIK.COM
All manufacturers brands, names, part numbers, model numbers and descriptions are used for reference and
identification purposes only, they are owned by the respective manufacturers. BOGVIK has no affiliation with the
OEM.
w
w
w
.bogvik.com
E:sales@
bogvik.com
M
:+86
15851989372
15. SHANGHAI BOGVIK WEAR MATERIAL CO., LTD.
WWW.BOGVIK.COM
All manufacturers brands, names, part numbers, model numbers and descriptions are used for reference and
identification purposes only, they are owned by the respective manufacturers. BOGVIK has no affiliation with the
OEM.
w
w
w
.bogvik.com
E:sales@
bogvik.com
M
:+86
15851989372
16. SHANGHAI BOGVIK WEAR MATERIAL CO., LTD.
WWW.BOGVIK.COM
All manufacturers brands, names, part numbers, model numbers and descriptions are used for reference and
identification purposes only, they are owned by the respective manufacturers. BOGVIK has no affiliation with the
OEM.
w
w
w
.bogvik.com
E:sales@
bogvik.com
M
:+86
15851989372
17. SHANGHAI BOGVIK WEAR MATERIAL CO., LTD.
WWW.BOGVIK.COM
All manufacturers brands, names, part numbers, model numbers and descriptions are used for reference and
identification purposes only, they are owned by the respective manufacturers. BOGVIK has no affiliation with the
OEM.
w
w
w
.bogvik.com
E:sales@
bogvik.com
M
:+86
15851989372
18. SHANGHAI BOGVIK WEAR MATERIAL CO., LTD.
WWW.BOGVIK.COM
All manufacturers brands, names, part numbers, model numbers and descriptions are used for reference and
identification purposes only, they are owned by the respective manufacturers. BOGVIK has no affiliation with the
OEM.
w
w
w
.bogvik.com
E:sales@
bogvik.com
M
:+86
15851989372
19. SHANGHAI BOGVIK WEAR MATERIAL CO., LTD.
WWW.BOGVIK.COM
All manufacturers brands, names, part numbers, model numbers and descriptions are used for reference and
identification purposes only, they are owned by the respective manufacturers. BOGVIK has no affiliation with the
OEM.
w
w
w
.bogvik.com
E:sales@
bogvik.com
M
:+86
15851989372
20. SHANGHAI BOGVIK WEAR MATERIAL CO., LTD.
WWW.BOGVIK.COM
All manufacturers brands, names, part numbers, model numbers and descriptions are used for reference and
identification purposes only, they are owned by the respective manufacturers. BOGVIK has no affiliation with the
OEM.
w
w
w
.bogvik.com
E:sales@
bogvik.com
M
:+86
15851989372
21. SHANGHAI BOGVIK WEAR MATERIAL CO., LTD.
WWW.BOGVIK.COM
All manufacturers brands, names, part numbers, model numbers and descriptions are used for reference and
identification purposes only, they are owned by the respective manufacturers. BOGVIK has no affiliation with the
OEM.
w
w
w
.bogvik.com
E:sales@
bogvik.com
M
:+86
15851989372
22. SHANGHAI BOGVIK WEAR MATERIAL CO., LTD.
WWW.BOGVIK.COM
All manufacturers brands, names, part numbers, model numbers and descriptions are used for reference and
identification purposes only, they are owned by the respective manufacturers. BOGVIK has no affiliation with the
OEM.
w
w
w
.bogvik.com
E:sales@
bogvik.com
M
:+86
15851989372
23. SHANGHAI BOGVIK WEAR MATERIAL CO., LTD.
WWW.BOGVIK.COM
All manufacturers brands, names, part numbers, model numbers and descriptions are used for reference and
identification purposes only, they are owned by the respective manufacturers. BOGVIK has no affiliation with the
OEM.
w
w
w
.bogvik.com
E:sales@
bogvik.com
M
:+86
15851989372
24. SHANGHAI BOGVIK WEAR MATERIAL CO., LTD.
WWW.BOGVIK.COM
All manufacturers brands, names, part numbers, model numbers and descriptions are used for reference and
identification purposes only, they are owned by the respective manufacturers. BOGVIK has no affiliation with the
OEM.
w
w
w
.bogvik.com
E:sales@
bogvik.com
M
:+86
15851989372
25. SHANGHAI BOGVIK WEAR MATERIAL CO., LTD.
WWW.BOGVIK.COM
All manufacturers brands, names, part numbers, model numbers and descriptions are used for reference and
identification purposes only, they are owned by the respective manufacturers. BOGVIK has no affiliation with the
OEM.
w
w
w
.bogvik.com
E:sales@
bogvik.com
M
:+86
15851989372
26. SHANGHAI BOGVIK WEAR MATERIAL CO., LTD.
WWW.BOGVIK.COM
All manufacturers brands, names, part numbers, model numbers and descriptions are used for reference and
identification purposes only, they are owned by the respective manufacturers. BOGVIK has no affiliation with the
OEM.
w
w
w
.bogvik.com
E:sales@
bogvik.com
M
:+86
15851989372
27. SHANGHAI BOGVIK WEAR MATERIAL CO., LTD.
WWW.BOGVIK.COM
All manufacturers brands, names, part numbers, model numbers and descriptions are used for reference and
identification purposes only, they are owned by the respective manufacturers. BOGVIK has no affiliation with the
OEM.
w
w
w
.bogvik.com
E:sales@
bogvik.com
M
:+86
15851989372
28. SHANGHAI BOGVIK WEAR MATERIAL CO., LTD.
WWW.BOGVIK.COM
All manufacturers brands, names, part numbers, model numbers and descriptions are used for reference and
identification purposes only, they are owned by the respective manufacturers. BOGVIK has no affiliation with the
OEM.
w
w
w
.bogvik.com
E:sales@
bogvik.com
M
:+86
15851989372
29. SHANGHAI BOGVIK WEAR MATERIAL CO., LTD.
WWW.BOGVIK.COM
All manufacturers brands, names, part numbers, model numbers and descriptions are used for reference and
identification purposes only, they are owned by the respective manufacturers. BOGVIK has no affiliation with the
OEM.
w
w
w
.bogvik.com
E:sales@
bogvik.com
M
:+86
15851989372
30. SHANGHAI BOGVIK WEAR MATERIAL CO., LTD.
WWW.BOGVIK.COM
All manufacturers brands, names, part numbers, model numbers and descriptions are used for reference and
identification purposes only, they are owned by the respective manufacturers. BOGVIK has no affiliation with the
OEM.
w
w
w
.bogvik.com
E:sales@
bogvik.com
M
:+86
15851989372
31. SHANGHAI BOGVIK WEAR MATERIAL CO., LTD.
WWW.BOGVIK.COM
All manufacturers brands, names, part numbers, model numbers and descriptions are used for reference and
identification purposes only, they are owned by the respective manufacturers. BOGVIK has no affiliation with the
OEM.
w
w
w
.bogvik.com
E:sales@
bogvik.com
M
:+86
15851989372
32. SHANGHAI BOGVIK WEAR MATERIAL CO., LTD.
WWW.BOGVIK.COM
All manufacturers brands, names, part numbers, model numbers and descriptions are used for reference and
identification purposes only, they are owned by the respective manufacturers. BOGVIK has no affiliation with the
OEM.
w
w
w
.bogvik.com
E:sales@
bogvik.com
M
:+86
15851989372
33. SHANGHAI BOGVIK WEAR MATERIAL CO., LTD.
WWW.BOGVIK.COM
All manufacturers brands, names, part numbers, model numbers and descriptions are used for reference and
identification purposes only, they are owned by the respective manufacturers. BOGVIK has no affiliation with the
OEM.
w
w
w
.bogvik.com
E:sales@
bogvik.com
M
:+86
15851989372
34. SHANGHAI BOGVIK WEAR MATERIAL CO., LTD.
WWW.BOGVIK.COM
All manufacturers brands, names, part numbers, model numbers and descriptions are used for reference and
identification purposes only, they are owned by the respective manufacturers. BOGVIK has no affiliation with the
OEM.
w
w
w
.bogvik.com
E:sales@
bogvik.com
M
:+86
15851989372
35. SHANGHAI BOGVIK WEAR MATERIAL CO., LTD.
WWW.BOGVIK.COM
All manufacturers brands, names, part numbers, model numbers and descriptions are used for reference and
identification purposes only, they are owned by the respective manufacturers. BOGVIK has no affiliation with the
OEM.
w
w
w
.bogvik.com
E:sales@
bogvik.com
M
:+86
15851989372
36. SHANGHAI BOGVIK WEAR MATERIAL CO., LTD.
WWW.BOGVIK.COM
All manufacturers brands, names, part numbers, model numbers and descriptions are used for reference and
identification purposes only, they are owned by the respective manufacturers. BOGVIK has no affiliation with the
OEM.
w
w
w
.bogvik.com
E:sales@
bogvik.com
M
:+86
15851989372
37. SHANGHAI BOGVIK WEAR MATERIAL CO., LTD.
WWW.BOGVIK.COM
All manufacturers brands, names, part numbers, model numbers and descriptions are used for reference and
identification purposes only, they are owned by the respective manufacturers. BOGVIK has no affiliation with the
OEM.
w
w
w
.bogvik.com
E:sales@
bogvik.com
M
:+86
15851989372
38. SHANGHAI BOGVIK WEAR MATERIAL CO., LTD.
WWW.BOGVIK.COM
All manufacturers brands, names, part numbers, model numbers and descriptions are used for reference and
identification purposes only, they are owned by the respective manufacturers. BOGVIK has no affiliation with the
OEM.
w
w
w
.bogvik.com
E:sales@
bogvik.com
M
:+86
15851989372
39. SHANGHAI BOGVIK WEAR MATERIAL CO., LTD.
WWW.BOGVIK.COM
All manufacturers brands, names, part numbers, model numbers and descriptions are used for reference and
identification purposes only, they are owned by the respective manufacturers. BOGVIK has no affiliation with the
OEM.
w
w
w
.bogvik.com
E:sales@
bogvik.com
M
:+86
15851989372
40. SHANGHAI BOGVIK WEAR MATERIAL CO., LTD.
WWW.BOGVIK.COM
All manufacturers brands, names, part numbers, model numbers and descriptions are used for reference and
identification purposes only, they are owned by the respective manufacturers. BOGVIK has no affiliation with the
OEM.
w
w
w
.bogvik.com
E:sales@
bogvik.com
M
:+86
15851989372
41. SHANGHAI BOGVIK WEAR MATERIAL CO., LTD.
WWW.BOGVIK.COM
All manufacturers brands, names, part numbers, model numbers and descriptions are used for reference and
identification purposes only, they are owned by the respective manufacturers. BOGVIK has no affiliation with the
OEM.
w
w
w
.bogvik.com
E:sales@
bogvik.com
M
:+86
15851989372
42. SHANGHAI BOGVIK WEAR MATERIAL CO., LTD.
WWW.BOGVIK.COM
All manufacturers brands, names, part numbers, model numbers and descriptions are used for reference and
identification purposes only, they are owned by the respective manufacturers. BOGVIK has no affiliation with the
OEM.
w
w
w
.bogvik.com
E:sales@
bogvik.com
M
:+86
15851989372
43. SHANGHAI BOGVIK WEAR MATERIAL CO., LTD.
WWW.BOGVIK.COM
All manufacturers brands, names, part numbers, model numbers and descriptions are used for reference and
identification purposes only, they are owned by the respective manufacturers. BOGVIK has no affiliation with the
OEM.
w
w
w
.bogvik.com
E:sales@
bogvik.com
M
:+86
15851989372
44. SHANGHAI BOGVIK WEAR MATERIAL CO., LTD.
WWW.BOGVIK.COM
All manufacturers brands, names, part numbers, model numbers and descriptions are used for reference and
identification purposes only, they are owned by the respective manufacturers. BOGVIK has no affiliation with the
OEM.
w
w
w
.bogvik.com
E:sales@
bogvik.com
M
:+86
15851989372
45. SHANGHAI BOGVIK WEAR MATERIAL CO., LTD.
WWW.BOGVIK.COM
All manufacturers brands, names, part numbers, model numbers and descriptions are used for reference and
identification purposes only, they are owned by the respective manufacturers. BOGVIK has no affiliation with the
OEM.
w
w
w
.bogvik.com
E:sales@
bogvik.com
M
:+86
15851989372
46. SHANGHAI BOGVIK WEAR MATERIAL CO., LTD.
WWW.BOGVIK.COM
All manufacturers brands, names, part numbers, model numbers and descriptions are used for reference and
identification purposes only, they are owned by the respective manufacturers. BOGVIK has no affiliation with the
OEM.
w
w
w
.bogvik.com
E:sales@
bogvik.com
M
:+86
15851989372
47. SHANGHAI BOGVIK WEAR MATERIAL CO., LTD.
WWW.BOGVIK.COM
All manufacturers brands, names, part numbers, model numbers and descriptions are used for reference and
identification purposes only, they are owned by the respective manufacturers. BOGVIK has no affiliation with the
OEM.
w
w
w
.bogvik.com
E:sales@
bogvik.com
M
:+86
15851989372
48. SHANGHAI BOGVIK WEAR MATERIAL CO., LTD.
WWW.BOGVIK.COM
All manufacturers brands, names, part numbers, model numbers and descriptions are used for reference and
identification purposes only, they are owned by the respective manufacturers. BOGVIK has no affiliation with the
OEM.
w
w
w
.bogvik.com
E:sales@
bogvik.com
M
:+86
15851989372
49. SHANGHAI BOGVIK WEAR MATERIAL CO., LTD.
WWW.BOGVIK.COM
All manufacturers brands, names, part numbers, model numbers and descriptions are used for reference and
identification purposes only, they are owned by the respective manufacturers. BOGVIK has no affiliation with the
OEM.
w
w
w
.bogvik.com
E:sales@
bogvik.com
M
:+86
15851989372
50. SHANGHAI BOGVIK WEAR MATERIAL CO., LTD.
WWW.BOGVIK.COM
All manufacturers brands, names, part numbers, model numbers and descriptions are used for reference and
identification purposes only, they are owned by the respective manufacturers. BOGVIK has no affiliation with the
OEM.
w
w
w
.bogvik.com
E:sales@
bogvik.com
M
:+86
15851989372
51. SHANGHAI BOGVIK WEAR MATERIAL CO., LTD.
WWW.BOGVIK.COM
All manufacturers brands, names, part numbers, model numbers and descriptions are used for reference and
identification purposes only, they are owned by the respective manufacturers. BOGVIK has no affiliation with the
OEM.
w
w
w
.bogvik.com
E:sales@
bogvik.com
M
:+86
15851989372
52. SHANGHAI BOGVIK WEAR MATERIAL CO., LTD.
WWW.BOGVIK.COM
All manufacturers brands, names, part numbers, model numbers and descriptions are used for reference and
identification purposes only, they are owned by the respective manufacturers. BOGVIK has no affiliation with the
OEM.
w
w
w
.bogvik.com
E:sales@
bogvik.com
M
:+86
15851989372
53. SHANGHAI BOGVIK WEAR MATERIAL CO., LTD.
WWW.BOGVIK.COM
All manufacturers brands, names, part numbers, model numbers and descriptions are used for reference and
identification purposes only, they are owned by the respective manufacturers. BOGVIK has no affiliation with the
OEM.
w
w
w
.bogvik.com
E:sales@
bogvik.com
M
:+86
15851989372
54. SHANGHAI BOGVIK WEAR MATERIAL CO., LTD.
WWW.BOGVIK.COM
All manufacturers brands, names, part numbers, model numbers and descriptions are used for reference and
identification purposes only, they are owned by the respective manufacturers. BOGVIK has no affiliation with the
OEM.
w
w
w
.bogvik.com
E:sales@
bogvik.com
M
:+86
15851989372
55. SHANGHAI BOGVIK WEAR MATERIAL CO., LTD.
WWW.BOGVIK.COM
All manufacturers brands, names, part numbers, model numbers and descriptions are used for reference and
identification purposes only, they are owned by the respective manufacturers. BOGVIK has no affiliation with the
OEM.
w
w
w
.bogvik.com
E:sales@
bogvik.com
M
:+86
15851989372
56. SHANGHAI BOGVIK WEAR MATERIAL CO., LTD.
WWW.BOGVIK.COM
All manufacturers brands, names, part numbers, model numbers and descriptions are used for reference and
identification purposes only, they are owned by the respective manufacturers. BOGVIK has no affiliation with the
OEM.
w
w
w
.bogvik.com
E:sales@
bogvik.com
M
:+86
15851989372
57. 0
0
SHANGHAI BOGVIK WEAR MATERIAL CO., LTD.
WWW.BOGVIK.COM
All manufacturers brands, names, part numbers, model numbers and descriptions are used for reference and
identification purposes only, they are owned by the respective manufacturers. BOGVIK has no affiliation with the
OEM.
w
w
w
.bogvik.com
E:sales@
bogvik.com
M
:+86
15851989372