Jaquess 36X48 Jaw
Our Customer would like to fill both ends to 18" F.I.E.
Just like in the photo, this design will be more durable。
If the crusher operates in very abrasive conditions at a very tight css then bottom of the jaws wear very quickly, fill jaw at both ends will help. But when you crush rock it expands by volume, corrugations allow this to occur, with this type of jaw enormous stress is transferred into the lower jaw frame and pitman/ bearings.
If rock is abrasive and soft no big deal, if its abrasive and tough, it can cause big issues.
We saw this problem with 50X60 Jaw at Huzhou quarry outside Shanghai.
So if possible good to know actual application and type of rock to decide best option.
Nip angle in crushing chamber is very important, smaller the better which is why thicker jaws with curve are requested by many people.
10 one of bogvik’s strongest product categories is plates made of manganese s...Fernando Zhang
One of Bogvik’s strongest product categories is plates made of manganese steel for jaw crushers.
This year, BOGVIK launched a new product — BOGVIK TIC plates. These are linings made of the standard alloys C, D and D1 but are reinforced with titanium carbide inserts. They show higher resistance to shock loads and cracking. This effect is achieved by special casting processes and heat treatment of the finished product, and the base alloy is selected in accordance with a rock type.
During the tests, the linings with inserts boasted an operating time that was 1.5 to 4 times more than that of classic manganese steel wear parts without inserts.
If you seek solutions to increase the intervals between plate replacement, reduce the number of maintenance stops, and lower your unit production costs — BOGVIK is what you need.
Contact our crushing&screening department to request individual solutions at: sales@bogvik.com
Jys casting for metso hp400 cone crusher partsTomas Chien
We design and metso hp400 cone crusher parts castings for mining, crushing, grinding, shredding, and custom applications for industrial clients worldwide.
Outros Produtos Dessa Linha
Especif. Técnicas
código 90315060
motor BD-13.0
partida Elétrica
tipo de combustível Diesel, monocilíndrico, 4 tempos, refrigerado a ar
sucção e recalque 3"
número de rotores 1
tipo de rotor Fechado
diâmetro do rotor 180 mm
altura manométrica máxima 66
vazão máxima 37,5 m³/h
sucção máxima 7 m
outros Carcaça e rotor de ferro fundido
peso líquido 83 Kg
capacidade do tanque 10 l
altura manométrica (mca) 66
Jys casting for metso hp200 cone crusher partsTomas Chien
We design and metso hp200 cone crusher parts castings for mining, crushing, grinding, shredding, and custom applications for industrial clients worldwide.
10 one of bogvik’s strongest product categories is plates made of manganese s...Fernando Zhang
One of Bogvik’s strongest product categories is plates made of manganese steel for jaw crushers.
This year, BOGVIK launched a new product — BOGVIK TIC plates. These are linings made of the standard alloys C, D and D1 but are reinforced with titanium carbide inserts. They show higher resistance to shock loads and cracking. This effect is achieved by special casting processes and heat treatment of the finished product, and the base alloy is selected in accordance with a rock type.
During the tests, the linings with inserts boasted an operating time that was 1.5 to 4 times more than that of classic manganese steel wear parts without inserts.
If you seek solutions to increase the intervals between plate replacement, reduce the number of maintenance stops, and lower your unit production costs — BOGVIK is what you need.
Contact our crushing&screening department to request individual solutions at: sales@bogvik.com
Jys casting for metso hp400 cone crusher partsTomas Chien
We design and metso hp400 cone crusher parts castings for mining, crushing, grinding, shredding, and custom applications for industrial clients worldwide.
Outros Produtos Dessa Linha
Especif. Técnicas
código 90315060
motor BD-13.0
partida Elétrica
tipo de combustível Diesel, monocilíndrico, 4 tempos, refrigerado a ar
sucção e recalque 3"
número de rotores 1
tipo de rotor Fechado
diâmetro do rotor 180 mm
altura manométrica máxima 66
vazão máxima 37,5 m³/h
sucção máxima 7 m
outros Carcaça e rotor de ferro fundido
peso líquido 83 Kg
capacidade do tanque 10 l
altura manométrica (mca) 66
Jys casting for metso hp200 cone crusher partsTomas Chien
We design and metso hp200 cone crusher parts castings for mining, crushing, grinding, shredding, and custom applications for industrial clients worldwide.
Kleemann Crusher Liners
MCO9 Crusher Liners
Crushing cone standard Cone S Part No. 2450546
Crushing shell standard fine Shell SF Part No. 2450551
MCO9 Crusher Liners
Crushing cone standard Cone S Part No. 2295672
Crushing shell standard medium Shell SM 2295649
MP1000 New Design
Mantle SPE STD F OS MX2 MM1564689 6284KG/PCS
Bowl Liners STD F MM1603957 5912KG/PCS
Original Equipment Replacement MP1000 Cone Crusher Parts
High quality cone crusher parts are a perfect fit
TIC Insert Jaw Crusher Wear Parts Manufacturer
BOGVIK has improved our customer Crusher Liners by TIC (titanium carbide) insert. BOGVIK TIC insert Crusher Liners are designed to improve efficiency and reduce costs by extending wear life and minimizing downtime. Compare with normal manganese crusher liners, our TIC insert wear parts span life can be 2-3 times. Based on our customer feedback, the more hard material to crush, the longer span life.
Benefits
2-3 times span life than normal manganese Crusher Liners
TIC insert Crusher Liners can decrease your plant downtime
Higher cost performance compare with normal manganese Crusher Liners
More easily to install
Original equipment replacement MP1000 cone crusher parts ensure proper fit, form and function to reduce maintenance issues and increase longevity. If your equipment fails, productivity of your entire plant is at risk. To avoid such losses, you must be sure critical replacement parts are readily available when you need them.
BOGVIK provides a complete offering, for both standard and engineered-to-order parts, ensuring you have the availability and support required. We provide flexible options to secure parts on a one-time basis, as a turn-key service, or anywhere in between.
Wear parts
Feed cone
Main frame liners
Mantle liners
Bowl liners
Protection cones
Arm guards
Jys casting for metso hp5 cone crusher partsTomas Chien
We design and manufacture replacement metso hp5 cone crusher wear parts castings for mining, crushing, grinding, shredding, and custom applications for industrial clients worldwide.
CARACTERÍSTICAS E ESPECIFICAÇÕES
Embreagem PermaClutch II®: longa vida útil e custos reduzidos ao longo da vida do tratorTransmissão PowrQuad®: excelente para terrenos irregularesChassi integralOpções de agricultura de precisão direto de fábrica
Kleemann Crusher Liners
MCO9 Crusher Liners
Crushing cone standard Cone S Part No. 2450546
Crushing shell standard fine Shell SF Part No. 2450551
MCO9 Crusher Liners
Crushing cone standard Cone S Part No. 2295672
Crushing shell standard medium Shell SM 2295649
MP1000 New Design
Mantle SPE STD F OS MX2 MM1564689 6284KG/PCS
Bowl Liners STD F MM1603957 5912KG/PCS
Original Equipment Replacement MP1000 Cone Crusher Parts
High quality cone crusher parts are a perfect fit
TIC Insert Jaw Crusher Wear Parts Manufacturer
BOGVIK has improved our customer Crusher Liners by TIC (titanium carbide) insert. BOGVIK TIC insert Crusher Liners are designed to improve efficiency and reduce costs by extending wear life and minimizing downtime. Compare with normal manganese crusher liners, our TIC insert wear parts span life can be 2-3 times. Based on our customer feedback, the more hard material to crush, the longer span life.
Benefits
2-3 times span life than normal manganese Crusher Liners
TIC insert Crusher Liners can decrease your plant downtime
Higher cost performance compare with normal manganese Crusher Liners
More easily to install
Original equipment replacement MP1000 cone crusher parts ensure proper fit, form and function to reduce maintenance issues and increase longevity. If your equipment fails, productivity of your entire plant is at risk. To avoid such losses, you must be sure critical replacement parts are readily available when you need them.
BOGVIK provides a complete offering, for both standard and engineered-to-order parts, ensuring you have the availability and support required. We provide flexible options to secure parts on a one-time basis, as a turn-key service, or anywhere in between.
Wear parts
Feed cone
Main frame liners
Mantle liners
Bowl liners
Protection cones
Arm guards
Jys casting for metso hp5 cone crusher partsTomas Chien
We design and manufacture replacement metso hp5 cone crusher wear parts castings for mining, crushing, grinding, shredding, and custom applications for industrial clients worldwide.
CARACTERÍSTICAS E ESPECIFICAÇÕES
Embreagem PermaClutch II®: longa vida útil e custos reduzidos ao longo da vida do tratorTransmissão PowrQuad®: excelente para terrenos irregularesChassi integralOpções de agricultura de precisão direto de fábrica
Shanghai Bogvik Wear Material Co., Ltd (BOGVIK)is one of the most professional crusher parts manufacturer and distributor. We major supply crusher wear parts from 5kgs to 10000kgs in a broad variety of high managnese steel crusher wear parts and heat resistant steel alloys and iron, and crusher spare parts of famous crusher brand .
Our advantage: "Three Goods " --Good Quality. We adopt advance ALKALI PHENOLIC RESIN SAND production line ensure casting quality, Supply stable, good quality parts for any customers. Our foundry is located in Sichuan province, foundry area: 25000 square meter, 150 professional workers, productions capacity: 20000tons per year, whole production line adopts the international most advanced ALKALI PHENOLIC RESIN SAND molding process, completely solve the traditional production process which is difficult to overcome the blowhole, impacted sand and surface micro crack problems, greatly improve the product quality of wear parts. --Good Service ;
We could measure and design parts which customer enquiry. And customers could benefit from parts wear life, with lower processing costs. We have quality track system for sales parts, if parts happened to any quality problem, customers only tell us casting NO. And we could track parts quickly and solve problem at the first time. --Good Delivery ; Advanced production line greatly improves production efficiency, Shorts the delivery time, ensure the delivery time in time. Above advantages helps us to become increasingly competitive in the provision of crusher wear spare parts and services for domestic and international customers. Now introduce our foundry simply as follows, welcome to visit our foundry warmly and hope to build cooperation with you .
Thank you in advance for your attention to the certainty of good business.
Shanghai Bogvik Wear Material Co., Ltd (BOGVIK)is one of the most professional crusher parts manufacturer and distributor. We major supply crusher wear parts from 5kgs to 10000kgs in a broad variety of high managnese steel crusher wear parts and heat resistant steel alloys and iron, and crusher spare parts of famous crusher brand .
Our advantage: "Three Goods " --Good Quality. We adopt advance ALKALI PHENOLIC RESIN SAND production line ensure casting quality, Supply stable, good quality parts for any customers. Our foundry is located in Sichuan province, foundry area: 25000 square meter, 150 professional workers, productions capacity: 20000tons per year, whole production line adopts the international most advanced ALKALI PHENOLIC RESIN SAND molding process, completely solve the traditional production process which is difficult to overcome the blowhole, impacted sand and surface micro crack problems, greatly improve the product quality of wear parts. --Good Service ;
We could measure and design parts which customer enquiry. And customers could benefit from parts wear life, with lower processing costs. We have quality track system for sales parts, if parts happened to any quality problem, customers only tell us casting NO. And we could track parts quickly and solve problem at the first time. --Good Delivery ; Advanced production line greatly improves production efficiency, Shorts the delivery time, ensure the delivery time in time. Above advantages helps us to become increasingly competitive in the provision of crusher wear spare parts and services for domestic and international customers. Now introduce our foundry simply as follows, welcome to visit our foundry warmly and hope to build cooperation with you .
Thank you in advance for your attention to the certainty of good business.
Shanghai Bogvik Wear Material Co., Ltd is one of the most professional crusher parts manufacturer and distributor. We major supply crusher wear parts from 5kgs to 10000kgs in a broad variety of Managnese steel crusher wear parts and alloys steel and chromium iron, Ceramic Insert hammers or blow bars ,Titanium Carbide Insert Liners and crusher spare parts of famous crusher brand .
Wear and spare parts are at the heart of BOGVIK business and we are continually driven to find new and improved ways to optimize component life and equipment performance.
Depending on the application & our clients requirements we offer a range of manganese steel wear parts including Manganese13%, Manganese18% and Manganese22% all with or without chrome & / or molybdenum additions. All manganese liners supplied by BOGVIK are made to our own internal material specifications which are for more stringent than “standard” foundry material specifications.
BOGVIK has in excess of 10000 wear part patterns to fit the world’s most popular crushers. Our patterns cover jaw crushers, cone crushers, gyratory crushers, roll crushers, hammer crushers, horizontal shaft impactors and vertical shaft impactors. No matter what your requirements are, BOGVIK probably already has existing patterns for the wear parts.
We believe in collaboration and work hand-in-hand with our customers to develop solutions that leverages our practical experience, in-house engineering & metallurgical capabilities and manufacturing capacity to provide a complete solution that meets our customer needs.
Contact us today to see how we can help extend service life, improve throughput, optimize supply chain and reduce the total cost of ownership.
sales@bogvik.com
中文:
上海勃格维克耐磨材料有限公司是国内最专业的破碎机配件制造商和经销商之一。我们主要供应从 5 公斤到 10000 公斤的各种锰钢破碎机磨损件和合金钢和铬铁、陶瓷插入锤或板锤、碳化钛插入衬板和著名破碎机品牌的破碎机备件。
磨损和备件是勃格维克 业务的核心,我们不断寻求新的和改进的方法来优化部件寿命和设备性能。
根据应用和我们客户的要求,我们提供一系列锰钢耐磨部件,包括锰13%、锰18% 和锰22%,均添加或不添加铬和/或钼。勃格维克 提供的所有锰衬板均按照我们自己的内部材料规格制造,这些规格比“标准”铸造材料规格更严格。
勃格维克 拥有超过 10000 种磨损零件的模具,以适合世界上最受欢迎的破碎机。我们的模具涵盖颚式破碎机、圆锥破碎机、旋回破碎机、辊式破碎机、锤式破碎机、卧式冲击破碎机和立轴式冲击破碎机。无论您需求什么类型的易损件,勃格维克可能已经有此零件的模具。
我们相信与客户携手合作,开发解决方案,利用我们的实践经验、内部工程和冶金能力以及制造能力,提供满足客户需求的完整解决方案。
立即联系我们,了解我们如何帮助延长使用寿命、提高吞吐量、优化供应链并降低总拥有成本。
Suitable for SANDVIK Crusher Liners
Shanghai Bogvik Wear Material Co., Ltd is one of the most professional crusher parts manufacturer and distributor. We major supply crusher wear parts from 5kgs to 10000kgs in a broad variety of Managnese steel crusher wear parts and alloys steel and chromium iron, Ceramic Insert hammers or blow bars ,Titanium Carbide Insert Liners and crusher spare parts of famous crusher brand .
Wear and spare parts are at the heart of BOGVIK business and we are continually driven to find new and improved ways to optimize component life and equipment performance.
Depending on the application & our clients requirements we offer a range of manganese steel wear parts including Manganese13%, Manganese18% and Manganese22% all with or without chrome & / or molybdenum additions. All manganese liners supplied by BOGVIK are made to our own internal material specifications which are for more stringent than “standard” foundry material specifications.
BOGVIK has in excess of 10000 wear part patterns to fit the world’s most popular crushers. Our patterns cover jaw crushers, cone crushers, gyratory crushers, roll crushers, hammer crushers, horizontal shaft impactors and vertical shaft impactors. No matter what your requirements are, BOGVIK probably already has existing patterns for the wear parts.
We believe in collaboration and work hand-in-hand with our customers to develop solutions that leverages our practical experience, in-house engineering & metallurgical capabilities and manufacturing capacity to provide a complete solution that meets our customer needs.
Contact us today to see how we can help extend service life, improve throughput, optimize supply chain and reduce the total cost of ownership.
sales@bogvik.com
中文:
上海勃格维克耐磨材料有限公司是国内最专业的破碎机配件制造商和经销商之一。我们主要供应从 5 公斤到 10000 公斤的各种锰钢破碎机磨损件和合金钢和铬铁、陶瓷插入锤或板锤、碳化钛插入衬板和著名破碎机品牌的破碎机备件。
磨损和备件是勃格维克 业务的核心,我们不断寻求新的和改进的方法来优化部件寿命和设备性能。
根据应用和我们客户的要求,我们提供一系列锰钢耐磨部件,包括锰13%、锰18% 和锰22%,均添加或不添加铬和/或钼。勃格维克 提供的所有锰衬板均按照我们自己的内部材料规格制造,这些规格比“标准”铸造材料规格更严格。
勃格维克 拥有超过 10000 种磨损零件的模具,以适合世界上最受欢迎的破碎机。我们的模具涵盖颚式破碎机、圆锥破碎机、旋回破碎机、辊式破碎机、锤式破碎机、卧式冲击破碎机和立轴式冲击破碎机。无论您需求什么类型的易损件,勃格维克可能已经有此零件的模具。
我们相信与客户携手合作,开发解决方案,利用我们的实践经验、内部工程和冶金能力以及制造能力,提供满足客户需求的完整解决方案。
立即联系我们,了解我们如何帮助延长使用寿命、提高吞吐量、优化供应链并降低总拥有成本。
12 tic insert liners double the service lifeFernando Zhang
Why is TIC Liner more wearable?
A. The structure and properties of the matrix of the parts have changed. We have increased the content of Mn, Mo, and rare earth.
Therefore, the metallographic grain size of Hadfield steel is refined and the strength is enhanced.
B. The hardness of TIC Insert exceeds HRC60, and the hardness is about 3 times that of Hadfield steel!
The arrangement of Fine Chamber is almost the same as that of rough Chamber. According to the structure of the casting, Feed Size, make some small adjustments, there is no major change.
C. TIC Insert is a mesh-like structure, which is divided into points on the wear part, so as to achieve the purpose of improving the wear resistance of the part as a whole.
For TIC design, our engineers once again improved the design based on the wear curve of the parts you provided.
The size of the ore entering the Fine Chamber is very small, so we reduced the diameter and arrangement spacing of the TIC in order to obtain the best wear effect.
I share these ideas with you to let you fully understand the in-depth research we have done in this project.
Every new project is full of challenges and unknowns, but we are willing to challenge some interesting & valuable projects together with new customer.
How to solve the problem of excessive wear on both ends of Jaw liners? This is a classic case
One of our customers is in Shandong Province, China, and they have 2 crushers to crush iron ore.
One is 36X48 Jaw Crusher
One is 42X54 Jaw Crusher
We are told by customers that when they use OEM Liners, both ends of the Liners wear out very quickly! So productivity quickly dropped.
We filled the two ends of the teeth for our customers, and inlaid a lot of TIC Inserts at both ends.
The service life of the improved Liners is 3.68 times that of OEM Liners!
The customer was very satisfied with this and gave BOGVIK all their orders for Liners from dozens of sites in China
Some stock order parts from BOGVIK
Stock parts can be shipped at any time
If you have any specific needs, please feel free to contact me sales@bogvik.com
Ready to ship to the U.S.
Ready to ship to the U.S.
A reliable manufacturer of spare and wear parts and a supplier of engineering solutions for mining and construction equipment
sales@bogvik.com
C125 1P Quarry Type Jaw Plate
N11954343 JAW, FIXED QUARRY 1P 40mm Thick
N11954353 JAW MVBL QUARRY 1P Standard
It is suitable for quarry, and the use time is longer than OEM standard!
Contact BOGVIK for a quote: sales@bogvik.com
Shanghai Bogvik Wear Material Co., Ltd is one of the most professional crusher parts manufacturer and distributor. We major supply crusher wear parts from 5kgs to 10000kgs in a broad variety of Managnese steel crusher wear parts and alloys steel and chromium iron, Ceramic Insert hammers or blow bars ,Titanium Carbide Insert Liners and crusher spare parts of famous crusher brand .
Wear and spare parts are at the heart of BOGVIK business and we are continually driven to find new and improved ways to optimize component life and equipment performance.
Depending on the application & our clients requirements we offer a range of manganese steel wear parts including Manganese13%, Manganese18% and Manganese22% all with or without chrome & / or molybdenum additions. All manganese liners supplied by BOGVIK are made to our own internal material specifications which are for more stringent than “standard” foundry material specifications.
BOGVIK has in excess of 10000 wear part patterns to fit the world’s most popular crushers. Our patterns cover jaw crushers, cone crushers, gyratory crushers, roll crushers, hammer crushers, horizontal shaft impactors and vertical shaft impactors. No matter what your requirements are, BOGVIK probably already has existing patterns for the wear parts.
We believe in collaboration and work hand-in-hand with our customers to develop solutions that leverages our practical experience, in-house engineering & metallurgical capabilities and manufacturing capacity to provide a complete solution that meets our customer needs.
Contact us today to see how we can help extend service life, improve throughput, optimize supply chain and reduce the total cost of ownership.
sales@bogvik.com
上海勃格维克耐磨材料有限公司是国内最专业的破碎机配件制造商和经销商之一。我们主要供应从 5 公斤到 10000 公斤的各种锰钢破碎机磨损件和合金钢和铬铁、陶瓷插入锤或板锤、碳化钛插入衬板和著名破碎机品牌的破碎机备件。
磨损和备件是勃格维克 业务的核心,我们不断寻求新的和改进的方法来优化部件寿命和设备性能。
根据应用和我们客户的要求,我们提供一系列锰钢耐磨部件,包括锰13%、锰18% 和锰22%,均添加或不添加铬和/或钼。勃格维克 提供的所有锰衬板均按照我们自己的内部材料规格制造,这些规格比“标准”铸造材料规格更严格。
勃格维克 拥有超过 10000 种磨损零件的模具,以适合世界上最受欢迎的破碎机。我们的模具涵盖颚式破碎机、圆锥破碎机、旋回破碎机、辊式破碎机、锤式破碎机、卧式冲击破碎机和立轴式冲击破碎机。无论您需求什么类型的易损件,勃格维克可能已经有此零件的模具。
我们相信与客户携手合作,开发解决方案,利用我们的实践经验、内部工程和冶金能力以及制造能力,提供满足客户需求的完整解决方案。
立即联系我们,了解我们如何帮助延长使用寿命、提高吞吐量、优化供应链并降低总拥有成本。
01 bogvik customizes the sandvik ch550 for customers with different chamber l...Fernando Zhang
BOGVIK customizes the CH550 for customers with different Chamber liners
CH550 CONCAVE F 452.8600-001
CH550 MANTLE B 452.8602-001
CH550 CONCAVE EC TOP GRIP 452.7843-001
CH550 MANTLE A 452.7626-001
CH550 CONCAVE C 452.8500-001
CH550 FILLER RING C 452.7388-001
CH550 CONCAVE MC 452.8496-001
CH550 CONCAVE M 452.8601-001
CH550 FILLER RING M 452.7386-001
CH550 MANTLE FF BG00133846-01
Hi Morning!
BOGVIK has in excess of 10000 wear part patterns to fit the world’s most popular crushers. Our patterns cover jaw crushers, cone crushers, gyratory crushers, roll crushers, hammer crushers, horizontal shaft impactors and vertical shaft impactors. No matter what your requirements are, BOGVIK probably already has existing patterns for the wear parts.
Depending on the application & our clients requirements we offer a range of manganese steel wear parts including Mn13%, Mn18% and Mn22% all with or without chrome & / or molybdenum additions. All manganese liners supplied by BOGVIK are made to our own internal material specifications which are for more stringent than “standard” foundry material specifications.
Dear Valued BOGVIK Customers,
We have already come back to the office after enjoying a pleasant CNY holiday. All orders can be proceeded as scheduled.
Any new inquiry, Kindly feel free to contact me.
Looking forward to further cooperation in 2021.
Rgeards
Fernando
Customized solutions for wear parts
Since establishment in 1996, BOGVIK has become a major supplier of Crusher wear parts. Our wear parts are known for their guaranteed outstanding performance and are widely accepted by original equipment manufacturers, major mining houses and aggregate producing companies worldwide.
BOGVIK has in excess of 10000 wear part patterns to fit the world’s most popular crushers. Our patterns cover jaw crushers, cone crushers, gyratory crushers, roll crushers, hammer crushers, horizontal shaft impactors and vertical shaft impactors. No matter what your requirements are, BOGVIK probably already has existing patterns for the wear parts.
Depending on the application & our clients requirements we offer a range of manganese steel wear parts including Mn13%, Mn18% and Mn22% all with or without chrome & / or molybdenum additions. All manganese liners supplied by BOGVIK are made to our own internal material specifications which are for more stringent than “standard” foundry material specifications.
Here are some of our recent excellent work for your reference:
Wear and spare parts are at the heart of BOGVIK business and we are continually driven to find new and improved ways to optimize component life and equipment performance.
We believe in collaboration and work hand-in-hand with our customers to develop solutions that leverages our practical experience, in-house engineering & metallurgical capabilities and manufacturing capacity to provide a complete solution that meets our customer needs.
Contact us today to see how we can help extend service life, improve throughput, optimize supply chain and reduce the total cost of ownership.
Wear and spare parts are at the heart of BOGVIK business and we are continually driven to find new and improved ways to optimize component life and equipment performance.
We believe in collaboration and work hand-in-hand with our customers to develop solutions that leverages our practical experience, in-house engineering & metallurgical capabilities and manufacturing capacity to provide a complete solution that meets our customer needs.
Contact us today to see how we can help extend service life, improve throughput, optimize supply chain and reduce the total cost of ownership.
Wear and spare parts are at the heart of BOGVIK business and we are continually driven to find new and improved ways to optimize component life and equipment performance.
We believe in collaboration and work hand-in-hand with our customers to develop solutions that leverages our practical experience, in-house engineering & metallurgical capabilities and manufacturing capacity to provide a complete solution that meets our customer needs.
Contact us today to see how we can help extend service life, improve throughput, optimize supply chain and reduce the total cost of ownership.
Wear and spare parts are at the heart of BOGVIK business and we are continually driven to find new and improved ways to optimize component life and equipment performance.
We believe in collaboration and work hand-in-hand with our customers to develop solutions that leverages our practical experience, in-house engineering & metallurgical capabilities and manufacturing capacity to provide a complete solution that meets our customer needs.
Contact us today to see how we can help extend service life, improve throughput, optimize supply chain and reduce the total cost of ownership.
Wear and spare parts are at the heart of BOGVIK business and we are continually driven to find new and improved ways to optimize component life and equipment performance.
We believe in collaboration and work hand-in-hand with our customers to develop solutions that leverages our practical experience, in-house engineering & metallurgical capabilities and manufacturing capacity to provide a complete solution that meets our customer needs.
Contact us today to see how we can help extend service life, improve throughput, optimize supply chain and reduce the total cost of ownership.
Wear and spare parts are at the heart of BOGVIK business and we are continually driven to find new and improved ways to optimize component life and equipment performance.
We believe in collaboration and work hand-in-hand with our customers to develop solutions that leverages our practical experience, in-house engineering & metallurgical capabilities and manufacturing capacity to provide a complete solution that meets our customer needs.
Contact us today to see how we can help extend service life, improve throughput, optimize supply chain and reduce the total cost of ownership.
Wear and spare parts are at the heart of BOGVIK business and we are continually driven to find new and improved ways to optimize component life and equipment performance.
We believe in collaboration and work hand-in-hand with our customers to develop solutions that leverages our practical experience, in-house engineering & metallurgical capabilities and manufacturing capacity to provide a complete solution that meets our customer needs.
Contact us today to see how we can help extend service life, improve throughput, optimize supply chain and reduce the total cost of ownership.
Final project report on grocery store management system..pdfKamal Acharya
In today’s fast-changing business environment, it’s extremely important to be able to respond to client needs in the most effective and timely manner. If your customers wish to see your business online and have instant access to your products or services.
Online Grocery Store is an e-commerce website, which retails various grocery products. This project allows viewing various products available enables registered users to purchase desired products instantly using Paytm, UPI payment processor (Instant Pay) and also can place order by using Cash on Delivery (Pay Later) option. This project provides an easy access to Administrators and Managers to view orders placed using Pay Later and Instant Pay options.
In order to develop an e-commerce website, a number of Technologies must be studied and understood. These include multi-tiered architecture, server and client-side scripting techniques, implementation technologies, programming language (such as PHP, HTML, CSS, JavaScript) and MySQL relational databases. This is a project with the objective to develop a basic website where a consumer is provided with a shopping cart website and also to know about the technologies used to develop such a website.
This document will discuss each of the underlying technologies to create and implement an e- commerce website.
Welcome to WIPAC Monthly the magazine brought to you by the LinkedIn Group Water Industry Process Automation & Control.
In this month's edition, along with this month's industry news to celebrate the 13 years since the group was created we have articles including
A case study of the used of Advanced Process Control at the Wastewater Treatment works at Lleida in Spain
A look back on an article on smart wastewater networks in order to see how the industry has measured up in the interim around the adoption of Digital Transformation in the Water Industry.
Forklift Classes Overview by Intella PartsIntella Parts
Discover the different forklift classes and their specific applications. Learn how to choose the right forklift for your needs to ensure safety, efficiency, and compliance in your operations.
For more technical information, visit our website https://intellaparts.com
Hybrid optimization of pumped hydro system and solar- Engr. Abdul-Azeez.pdffxintegritypublishin
Advancements in technology unveil a myriad of electrical and electronic breakthroughs geared towards efficiently harnessing limited resources to meet human energy demands. The optimization of hybrid solar PV panels and pumped hydro energy supply systems plays a pivotal role in utilizing natural resources effectively. This initiative not only benefits humanity but also fosters environmental sustainability. The study investigated the design optimization of these hybrid systems, focusing on understanding solar radiation patterns, identifying geographical influences on solar radiation, formulating a mathematical model for system optimization, and determining the optimal configuration of PV panels and pumped hydro storage. Through a comparative analysis approach and eight weeks of data collection, the study addressed key research questions related to solar radiation patterns and optimal system design. The findings highlighted regions with heightened solar radiation levels, showcasing substantial potential for power generation and emphasizing the system's efficiency. Optimizing system design significantly boosted power generation, promoted renewable energy utilization, and enhanced energy storage capacity. The study underscored the benefits of optimizing hybrid solar PV panels and pumped hydro energy supply systems for sustainable energy usage. Optimizing the design of solar PV panels and pumped hydro energy supply systems as examined across diverse climatic conditions in a developing country, not only enhances power generation but also improves the integration of renewable energy sources and boosts energy storage capacities, particularly beneficial for less economically prosperous regions. Additionally, the study provides valuable insights for advancing energy research in economically viable areas. Recommendations included conducting site-specific assessments, utilizing advanced modeling tools, implementing regular maintenance protocols, and enhancing communication among system components.
TECHNICAL TRAINING MANUAL GENERAL FAMILIARIZATION COURSEDuvanRamosGarzon1
AIRCRAFT GENERAL
The Single Aisle is the most advanced family aircraft in service today, with fly-by-wire flight controls.
The A318, A319, A320 and A321 are twin-engine subsonic medium range aircraft.
The family offers a choice of engines
Immunizing Image Classifiers Against Localized Adversary Attacksgerogepatton
This paper addresses the vulnerability of deep learning models, particularly convolutional neural networks
(CNN)s, to adversarial attacks and presents a proactive training technique designed to counter them. We
introduce a novel volumization algorithm, which transforms 2D images into 3D volumetric representations.
When combined with 3D convolution and deep curriculum learning optimization (CLO), itsignificantly improves
the immunity of models against localized universal attacks by up to 40%. We evaluate our proposed approach
using contemporary CNN architectures and the modified Canadian Institute for Advanced Research (CIFAR-10
and CIFAR-100) and ImageNet Large Scale Visual Recognition Challenge (ILSVRC12) datasets, showcasing
accuracy improvements over previous techniques. The results indicate that the combination of the volumetric
input and curriculum learning holds significant promise for mitigating adversarial attacks without necessitating
adversary training.
Event Management System Vb Net Project Report.pdfKamal Acharya
In present era, the scopes of information technology growing with a very fast .We do not see any are untouched from this industry. The scope of information technology has become wider includes: Business and industry. Household Business, Communication, Education, Entertainment, Science, Medicine, Engineering, Distance Learning, Weather Forecasting. Carrier Searching and so on.
My project named “Event Management System” is software that store and maintained all events coordinated in college. It also helpful to print related reports. My project will help to record the events coordinated by faculties with their Name, Event subject, date & details in an efficient & effective ways.
In my system we have to make a system by which a user can record all events coordinated by a particular faculty. In our proposed system some more featured are added which differs it from the existing system such as security.
Explore the innovative world of trenchless pipe repair with our comprehensive guide, "The Benefits and Techniques of Trenchless Pipe Repair." This document delves into the modern methods of repairing underground pipes without the need for extensive excavation, highlighting the numerous advantages and the latest techniques used in the industry.
Learn about the cost savings, reduced environmental impact, and minimal disruption associated with trenchless technology. Discover detailed explanations of popular techniques such as pipe bursting, cured-in-place pipe (CIPP) lining, and directional drilling. Understand how these methods can be applied to various types of infrastructure, from residential plumbing to large-scale municipal systems.
Ideal for homeowners, contractors, engineers, and anyone interested in modern plumbing solutions, this guide provides valuable insights into why trenchless pipe repair is becoming the preferred choice for pipe rehabilitation. Stay informed about the latest advancements and best practices in the field.
The Benefits and Techniques of Trenchless Pipe Repair.pdf
08 jaw cedarapids 3648
1. JAW CEDARAPIDS 3648
Jaquess 36X48 Jaw
Our Customer would like to fill both ends to 18" F.I.E.
Just like in the photo, this design will be more durable。
If the crusher operates in very abrasive conditions at a very tight css then bottom of the jaws wear very quickly, fill jaw at both ends will
help. But when you crush rock it expands by volume, corrugations allow this to occur, with this type of jaw enormous stress is transferred
into the lower jaw frame and pitman/ bearings.
If rock is abrasive and soft no big deal, if its abrasive and tough, it can cause big issues.
We saw this problem with 50X60 Jaw at Huzhou quarry outside Shanghai.
So if possible good to know actual application and type of rock to decide best option.
Nip angle in crushing chamber is very important, smaller the better which is why thicker jaws with curve are requested by many people.
19. CH860I(CH860) CONCAVE MC 452.8239-001 452.8239-002
CH860I(CH860) FILLER RING 452.7883-001 452.7883-001
CH860I(CH860) CONCAVE M 452.8240-001 452.8240-002
CH860I(CH860) MANTLE FF 452.8243-001 452.8243-002
CH865I(CH865) CONCAVE F 452.8242-001 452.8242-002
CH865I(CH865) MANTLE EF 452.8236-001 452.8236-002
CH865I(CH865) CONCAVE EF 452.8235-001 452.8235-002
CH865I(CH865) MANTLE OB 452.8244-001 452.8244-002
CH865I(CH865) CONCAVE HR 452.8446-001 452.8446-002
CH870I(CH870) CONCAVE EC TOP GRIP BG00239713-01 BG00239713-02
CH870I(CH870) CONCAVE C 452.2255-001 452.2255-002
20. CH870I(CH870) MANTLE A 452.0837-001 452.0837-002
CH870I(CH870) MANTLE B 452.0872-001 452.0872-002
CH870I(CH870) FILLER RING EC 452.0891-901 452.0891-901
CH870I(CH870) FILLER RING C 452.2269-901 452.2269-901
CH870I(CH870) CONCAVE MC 452.2253-001 452.2253-002
CH870I(CH870) CONCAVE M 452.1754-001 452.1754-002
CH870I(CH870) FILLER RING M 452.0898-901 452.0898-901
CH870I(CH870) CONCAVE MF 452.0842-001 452.0842-002
CH870I(CH870) MANTLE EF 452-0844-001 452-0844-002
CH870I(CH870) FILLER RING EF 452.0899-901 452.0899-901
21. CH870I(CH870) CONCAVE F 452.0841-001 452.0841-002
CH870I(CH870) CONCAVE EF 452.0840-001 452.0840-002
CH870I(CH870) MANTLE EF 452.0845-001 452.0845-001
CH870I(CH870) MANTLE FF BG00239981-01 BG00239981-02
CH870I(CH870) MANTLE OB 452.4900-001 452.4900-002
CH870I(CH870) CONCAVE HR BG00401157-01 BG00401157-02
CH870I(CH870) MANTLE B BG00692006-01 BG00692006-02
CH890I(CH890,CH880,H8800) CONCAVE EC 442.9336-001 442.9336-002
CH890I(CH890,CH880,H8800) MANTLE A 442.9314-001 442.9314-002
CH890I(CH890,CH880,H8800) MANTLE B 442.9339-001 442.9339-002
CH890I(CH890,CH880,H8800) CONCAVE C 442.9398-001 442.9398-002
22. CH890I(CH890,CH880,H8800) CONCAVE MC 442.9471-001 442.9471-002
CH890I(CH890,CH880,H8800) MANTLE HC 442.9758-001 442.9758-002
CH890I(CH890,CH880,H8800) FILLER RING 442.9520-00 442.9520-00
CH890I(CH890,CH880,H8800) CONCAVE MC 442.9337-001 442.9337-002
CH890I(CH890,CH880,H8800) FILLER RING 442.9338-00 442.9338-00
CH890I(CH890,CH880,H8800) CONCAVE MF 442.9312-001 442.9312-002
CH890I(CH890,CH880,H8800) FILLER RING 442.9332-00 442.9332-00
CH890I(CH890,CH880,H8800) CONCAVE F 442.9471-001 442.9471-002
CH890I(CH890,CH880,H8800) MANTLE EF 452.0264-001 452.0264-002
CH890I(CH890,CH880,H8800) FILLER RING 452.9520-00 452.9520-00
23. CH890I(CH890,CH880,H8800) MANTLE FF BG00282784-01 BG00282784-02
CH890I(CH890,CH880,H8800) MANTLE OB 452.4051-001 452.4051-002
CH890I(CH890,CH880,H8800) CONCAVE EFX 452.1067-001 452.1067-002
CH890I(CH890,CH880,H8800) CONCAVE EF 452.0263-001 452.0263-002
CH890I(CH890,CH880,H8800) CONCAVE EEF 452.0579-001 452.0579-002
CH890I(CH890,CH880,H8800) CONCAVE HR BG00284338-01 BG00284338-02
Crusher Part Number Type Chamber Material Unit Weight
(Kg)
H2800 442.6197-01 Mantle B M1 232
H2800 442.6197-02 Mantle B M2 232
H2800 442.9569-01 Concave EC M1 315
H2800 442.9569-02 Concave EC M2 315
H2800 442.9586-01 Concave M M1 305
H2800 442.9586-02 Concave M M2 305
H2800 442.9585-01 Concave MF M1 320
24. H2800 442.9585-02 Concave MF M2 320
H2800 442.9587-01 Mantle
M1 272
H2800 442.9587-02 Mantle
M2 272
H4800 442.7225-01 Mantle A M1 687
H4800 442.7225-02 Mantle A M2 687
H4800 442.7230-01 Mantle B M1 607
H4800 442.7230-02 Mantle B M2 607
H4800 442.9073-01 Mantle HC M1 730
H4800 442.9073-02 Mantle HC M2 730
H4800 442.8039-01 Mantle EF M1 765
H4800 442.8039-02 Mantle EF M2 765
H4800 442.8417-01 Concave F M1 838
H4800 442.8417-02 Concave F M2 838
H4800 442.8419-01 Concave M M1 859
H4800 442.8419-02 Concave M M2 859
H4800 442.8418-01 Concave MF M1 858
H4800 442.8418-02 Concave MF M2 858
H4800 442.8420-01 Concave MC M1 826
H4800 442.8420-02 Concave MC M2 826
103. Parts No. Items
Replace
Quantity
853.0590-00 PIN, SPRING, SLOTTED, HEAVY DUTY ISO8752-8X28-ST-ZNPH 1
442.8772-01 PINION SHAFT H/S600 1
857.0350-00 KEY T 25X14X95 1
857.0336-00 KEY T 28X16X110 SMS 2307 1
900.0022-00 ELBOW ISO49-A4-3/4-FE-A 1
900.2026-00 MAGNETIC PLUG 3/4 1
873.0385-00 RING, SEAL TREDO NR 20 1
442.8778-01 PLUG OIL LEVEL /H6000 1
873.0108-00 O-RING SMS1586-34.20X3.00-NBR70 1
442.7578-01 PIPE 1
855.0132-00 RETAING RING SGA 110 SS1581 1
442.8787-01 WASHER 1
442.8788-01 SPACER 1
104. Parts No. Items
Replace
Quantity
442.8788-01 SPACER 1
840.0066-00 BOLT, HEXAGONAL ISO4014-M16X40-8.8-A3F 1
847.0016-00 SMS-L ACC Washer BRB 3x17/30 1
840.1063-00 SCREW, HEXAGONAL ISO4017-M16X120-8.8-A3A 2
845.0009-00 NUT, HEXAGONAL ISO4032-M16-8-A3A 2
452.4222-901/452.1700-901 /452.1640-
901
MAIN SHAFT ASSEMBLY S6000 1
442.8848-901 /452.3272-901 MAIN SHAFT ASSEMBLY H6000 1
442.8971-01 MAIN SHAFT S6000 / USE ASSY N11852162 1
442.8767-01 MAIN SHAFT H6000 / USE ASSY N11851912 1
BG00325390 MAIN SHAFT SLEEVE TAPERED CH/CS660 / BLOCK U.S.A. 1
442.8792-01 MAIN SHAFT SLEEVE 1
853.0119-00 PIN CP 25m6X60 SMS2374 1
442.8732-01 MAIN SHAFT STEP 1
105. Parts No. Items
Replace
Quantity
855.0026-00 RING, RETAINING, EXTERNAL DIN471-100X3-ST-ZNPH 1
442.8974-01 HEAD S6000 / USE ASSY 1
442.8763-01 HEAD H6000 / USE ASSY N11851912 1
442.8819-03 MANTLE A 21MNCR CH660 1
442.9760-02 MANTLE HC 18MNCR CH660 1
442.8820-02 MANTLE B 18MNCR CH660 1
442.8821-02 MANTLE D 18MNCR CH660 1
442.8819-02 MANTLE A 18MNCR CH660 1
442.8820-03 MANTLE B 18MNCR CH660 1
452.1543-003 MANTLE D SPECIAL 21MNCR CH660 1
442.9760-03 MANTLE HC 21MNCR CH660 1
442.9760-01 MANTLE HC 14MNCR CH660 1
442.8819-01 MANTLE A 14MNCR CH660 1
106. Parts No. Items
Replace
Quantity
442.8820-01 MANTLE B 14MNCR CH660 1
442.8821-03 MANTLE D 21MNCR CH660 1
442.8821-01 MANTLE D 14MNCR CH660 1
442.8983-03 MANTLE B 21MNCR CS660 1
442.8983-02 MANTLE B 18MNCR CS660 1
442.8983-01 MANTLE B 14MNCR CS660 1
442.8800-00 HEAD NUT WITH RING 1
442.8791-01 HEAD NUT INNER 1
452.0269-001 BURNING RING H51/ H6000 1
442.8802-01 DUST SEAL RING 1
442.8801-01 RET RING H/S 6000 1
442.8804-01 RETAINER H/S6000 1
442.8805-01 SCRAPER H/S6000 1
107. Parts No. Items
Replace
Quantity
840.0069-00 SCREW M6S 16X55 8.8 ISO4017 11
840.0071-00 SCREW, HEXAGONAL ISO4017-M16X65-8.8-UNPLTD 1
847.0016-00 SMS-L ACC Washer BRB 3x17/30 12
BG00395290 TOPSHELL PACKAGE, CH660, STD SPIDER BUSHING / XT710 CONCAVE 1
BG00395488/452.4131-901 TOP SHELL ASSY / RAISED ARMS CH660 (NEW STYLE) 1
442.9037-00 TOP SHELL EC2 (OLD STYLE) 1
442.8970-01/452.5837-901 TOP SHELL W/O SPIDER S6800/CS660 1
452.3760-901 TOP SHELL (BARE MACHINING) WITH RAISED ARMS 1
442.8975-01 SPIDER RIM LINER (x12) /S6800/CS660 12
853.0983-00 PIN 2172-00 D40X40 /S6800 24
442.8976-01 SPIDER ARM SHIELD /S6800/CS660 2
442.8812-01 SPIDER ARM SHIELD 14MNCR CH660 2
900.0425-00 PIPE COUPLING 4
120. Parts No. Items Replace Quantity
442.9809-01 WEAR RING 1
442.9808-01 SPACER 1
442.9808-01 SPACER 1
873.0136-00 O-RING 139.3X5.7 SMS 1586 1
873.0136-00 O-RING 139.3X5.7 SMS 1586 1
873.1219-00 RING, SEAL TYPE 4 170X200X15 ISO 1
873.1219-00 RING, SEAL TYPE 4 170X200X15 ISO 1
442.9260-01 BEARING COVER OUTER 1
840.0046-00 BOLT, HEXAGONAL ISO4014-M12X35-8.8-A3F 6
847.0147-00 WASHER, PLAIN ISO7089-12-200HV-A3A 6
840.0078-00 SCREW M6S 20X60 8.8 ISO4017 6
847.0132-00 WASHER BRB 3x21/36 6
442.9365-01 GASKET T=0,8 MM 1
442.9366-02 GASKET T=0,8 MM 1
121. Parts No. Items Replace Quantity
442.9366-01 GASKET T=0,5 MM 1
853.0590-00 PIN, SPRING, SLOTTED, HEAVY DUTY 1
452.0727-001 PINION SHAFT 1
857.0360-00 KEY T 32x18x115 SMS 2307 1
857.0354-00 KEY T 36x20x140 SMS 2307 1
900.0022-00 ELBOW ISO49-A4-3/4-FE-A 1
900.0655-00 ADAPTER R3/4 X R3/4 702-12-12 1
442.9346-01 OIL LEVEL GAUGE 1
873.0387-00 RING, SEAL TREDO NR 26 1
900.0656-00 STRAIGHT ADAPTER 1
873.0386-00 RING, SEAL 1
855.0134-00 RETAINING RING SGA 135 SS 1581 1
840.1063-00 SCREW, HEXAGONAL ISO4017-M16X120-8.8-A3A 2
845.0009-00 NUT, HEXAGONAL ISO4032-M16-8-A3A 2
122. Parts No. Items Replace Quantity
452.0917-901 MAIN SHAFT ASSEMBLY CH870 1
452.1930-901/452.4426-901 MAIN SHAFT & HEAD CENTER ASSY / USE ASSY N11852163 1
452.0505-001 MAIN SHAFT SLEEVE 1
853.0119-00 PIN CP 25m6X60 SMS2374 1
452.2630* MAIN SHAFT STEP / USE ASSEMBLY N11852088 1
855.0026-00 RING, RETAINING, EXTERNAL DIN471-100X3-ST-ZNPH 1
N/A MANTLE SPECIAL C (XT710) 1
452.0845-002 MANTLE EF (XT710) 1
452.0936-901 HEAD NUT WITH RING 1
452.0930-001 HEAD NUT INNER 1
452.0938-001 BURNING RING 1
452.0924-001 DUST SEAL RING 1
452.0921-001 RETAINING RING 1
442.9367-01 RETAINER 1
132. Parts No. Items Replace Quantity
847.0147-00 WASHER, PLAIN ISO7089-12-200HV-A3A 6
840.0078-00 SCREW M6S 20X60 8.8 ISO4017 6
847.0132-00 WASHER BRB 3x21/36 6
442.9365-01 GASKET T=0,8 MM 1
442.9366-01 GASKET T=0,5 MM 1
900.0655-00 ADAPTER R3/4 X R3/4 702-12-12 1
853.0590-00 PIN, SPRING, SLOTTED, HEAVY DUTY 1
442.9807-01 PINION SHAFT NEW STYLE 1
442.9259-01 PINION SHAFT OLD STYLE/OBSOLETE 1
857.0360-00 KEY T 32x18x115 SMS 2307 / FOR NEW SHAFT 1
857.0353-00 KEY T 32x18x120 SMS 2307 / FOR OLD SHAFT 1
857.0354-00 KEY T 36x20x140 SMS 2307 1
900.0022-00 ELBOW ISO49-A4-3/4-FE-A 1
442.9346-01 OIL LEVEL GAUGE, H8000 1
133. Parts No. Items Replace Quantity
873.0387-00 RING, SEAL TREDO NR 26 1
900.0656-00 STRAIGHT ADAPTER 1
873.0386-00 RING, SEAL 1
855.0030-00 RING, RETAINING, EXTERNAL DIN471-140X4-ST-ZNPH 1
442.9343-01 WASHER √∏158/√∏140.5X94 1
840.1063-00 SCREW, HEXAGONAL ISO4017-M16X120-8.8-A3A 2
845.0009-00 NUT, HEXAGONAL ISO4032-M16-8-A3A 2
N/A MAINSHAFT ASSY RE-MACHINED / CYLINDRICAL FIT / H8800 1
452.6195-901 MAIN SHAFT ASSEMBLY CYLINDRICAL H8000/CH880 1
452.0522-901 MAINSHAFT ASSY CONICAL TAPERED HEAD SEATING 1
N/A MAIN SHAFT RE-MACHINED / USE ASSY N11852113 1
452.4291-Shaft MAIN SHAFT CYLINDRICAL / USE ASSY N11852106 1
442.9243-01 MAIN SHAFT CONICAL / USE ASSY N11852105 1
442.9294-01 MAIN SHAFT SLEEVE 1
134. Parts No. Items Replace Quantity
853.0988-00 PIN CP 30M6x70 SMS 2374 1
442.9723-01 MAIN SHAFT STEP 1
855.0026-00 RING, RETAINING, EXTERNAL DIN471-100X3-ST-ZNPH 1
N/A HEAD FOR RE-MACHINED SHAFT / USE ASSY N11852113 1
452.4291-Head HEAD CYLINDRICAL FIT H8000 / USE ASSY N11852106 1
442.9244-01 HEAD CONICAL FIT H8000 / USE ASSY N11852105 1
442.9314-02 MANTLE A (XT710) CH880 1
N/A MANTLE SPECIAL EF (XT710) CH880 1
452.4051-002 MANTLE EEF (XT710) CH880 1
442.9339-02 MANTLE B (XT710) CH880 1
N/A MANTLE SPECIAL EF (XT710) CH880 1
442.9340-02/452.0264-002 MANTLE EF (XT710) CH880 1
442.9270-00 HEAD NUT WITH RING 1
442.9270-01 HEAD NUT W/O RING (ENHANCED) 1
135. Parts No. Items Replace Quantity
442.9269-01 HEAD NUT INNER 1
442.9269-01 HEAD NUT INNER (ENHANCED) 1
442.9306-01 BURNING RING H8000 1
442.9271-01 DUST SEAL RING 1
442.9272-01 RETAINING RING 1
442.9367-01 RETAINER 1
442.9368-01 SCRAPER 1
840.0069-00 SCREW M6S 16X55 8.8 ISO4017 15
840.0074-00 BOLT, HEXAGONAL ISO4014-M16X80-8.8-A3A 1
847.0016-00 SMS-L ACC Washer BRB 3x17/30 16
452.5427-001 TOP SHELL EC2 H8000 1
442.9265-00 SPIDER ARM SHIELD STD 2
452.0266-001/442.9268-01 SPIDER CAP 1
912.0114-00 FILTER, AIR PI 0102 MIC, 77575806 1
136. Parts No. Items Replace Quantity
900.0169-00 NIPPLE, HEXAGONAL ISO49-N8-1/4-FE-A 1
900.0002-00 ELBOW ISO49-A1-1/4-FE-A 1
873.1232-00 O-RING 790,0 x 5,7 SMS 1586 1
840.0653-00 BOLT, HEXAGONAL ISO4014-M20X100-8.8-A3A 4
847.0132-00 WASHER BRB 3x21/36 4
442.9266-MNBR SPIDER BUSHING MNBR 1
442.9266-01 SPIDER BUSHING STD 1
N/A SPIDER BUSHING SPECIAL WITH 56 MM STROKE MNBR 1
840.0652-00 BOLT, HEXAGONAL ISO4014-M20X90-8.8-TZN 8
847.0132-00 WASHER BRB 3x21/36 8
452.0418-001/442.9267-01 SPIDER SEAL RING 2
452.0417-001/452.0417-001 RING 1
452.0419-001/452.0419-001 SUPPORT RING 1
841.0225-00 SCREW, CAP, HEXAGON SOCKET HEAD ISO4762-M6X45-8.8-A3A 8