Shanghai Bogvik Wear Material Co., Ltd (BOGVIK)is one of the most professional crusher parts manufacturer and distributor. We major supply crusher wear parts from 5kgs to 10000kgs in a broad variety of high managnese steel crusher wear parts and heat resistant steel alloys and iron, and crusher spare parts of famous crusher brand .
Our advantage: "Three Goods " --Good Quality. We adopt advance ALKALI PHENOLIC RESIN SAND production line ensure casting quality, Supply stable, good quality parts for any customers. Our foundry is located in Sichuan province, foundry area: 25000 square meter, 150 professional workers, productions capacity: 20000tons per year, whole production line adopts the international most advanced ALKALI PHENOLIC RESIN SAND molding process, completely solve the traditional production process which is difficult to overcome the blowhole, impacted sand and surface micro crack problems, greatly improve the product quality of wear parts. --Good Service ;
We could measure and design parts which customer enquiry. And customers could benefit from parts wear life, with lower processing costs. We have quality track system for sales parts, if parts happened to any quality problem, customers only tell us casting NO. And we could track parts quickly and solve problem at the first time. --Good Delivery ; Advanced production line greatly improves production efficiency, Shorts the delivery time, ensure the delivery time in time. Above advantages helps us to become increasingly competitive in the provision of crusher wear spare parts and services for domestic and international customers. Now introduce our foundry simply as follows, welcome to visit our foundry warmly and hope to build cooperation with you .
Thank you in advance for your attention to the certainty of good business.
www.bogvik.com
Shanghai Bogvik Wear Material Co., Ltd (BOGVIK)is one of the most professional crusher parts manufacturer and distributor. We major supply crusher wear parts from 5kgs to 10000kgs in a broad variety of high managnese steel crusher wear parts and heat resistant steel alloys and iron, and crusher spare parts of famous crusher brand .
Our advantage: "Three Goods " --Good Quality. We adopt advance ALKALI PHENOLIC RESIN SAND production line ensure casting quality, Supply stable, good quality parts for any customers. Our foundry is located in Sichuan province, foundry area: 25000 square meter, 150 professional workers, productions capacity: 20000tons per year, whole production line adopts the international most advanced ALKALI PHENOLIC RESIN SAND molding process, completely solve the traditional production process which is difficult to overcome the blowhole, impacted sand and surface micro crack problems, greatly improve the product quality of wear parts. --Good Service ;
We could measure and design parts which customer enquiry. And customers could benefit from parts wear life, with lower processing costs. We have quality track system for sales parts, if parts happened to any quality problem, customers only tell us casting NO. And we could track parts quickly and solve problem at the first time. --Good Delivery ; Advanced production line greatly improves production efficiency, Shorts the delivery time, ensure the delivery time in time. Above advantages helps us to become increasingly competitive in the provision of crusher wear spare parts and services for domestic and international customers. Now introduce our foundry simply as follows, welcome to visit our foundry warmly and hope to build cooperation with you .
Thank you in advance for your attention to the certainty of good business.
Shanghai Bogvik Wear Material Co., Ltd is one of the most professional crusher parts manufacturer and distributor. We major supply crusher wear parts from 5kgs to 10000kgs in a broad variety of Managnese steel crusher wear parts and alloys steel and chromium iron, Ceramic Insert hammers or blow bars ,Titanium Carbide Insert Liners and crusher spare parts of famous crusher brand .
Wear and spare parts are at the heart of BOGVIK business and we are continually driven to find new and improved ways to optimize component life and equipment performance.
Depending on the application & our clients requirements we offer a range of manganese steel wear parts including Manganese13%, Manganese18% and Manganese22% all with or without chrome & / or molybdenum additions. All manganese liners supplied by BOGVIK are made to our own internal material specifications which are for more stringent than “standard” foundry material specifications.
BOGVIK has in excess of 10000 wear part patterns to fit the world’s most popular crushers. Our patterns cover jaw crushers, cone crushers, gyratory crushers, roll crushers, hammer crushers, horizontal shaft impactors and vertical shaft impactors. No matter what your requirements are, BOGVIK probably already has existing patterns for the wear parts.
We believe in collaboration and work hand-in-hand with our customers to develop solutions that leverages our practical experience, in-house engineering & metallurgical capabilities and manufacturing capacity to provide a complete solution that meets our customer needs.
Contact us today to see how we can help extend service life, improve throughput, optimize supply chain and reduce the total cost of ownership.
sales@bogvik.com
中文:
上海勃格维克耐磨材料有限公司是国内最专业的破碎机配件制造商和经销商之一。我们主要供应从 5 公斤到 10000 公斤的各种锰钢破碎机磨损件和合金钢和铬铁、陶瓷插入锤或板锤、碳化钛插入衬板和著名破碎机品牌的破碎机备件。
磨损和备件是勃格维克 业务的核心,我们不断寻求新的和改进的方法来优化部件寿命和设备性能。
根据应用和我们客户的要求,我们提供一系列锰钢耐磨部件,包括锰13%、锰18% 和锰22%,均添加或不添加铬和/或钼。勃格维克 提供的所有锰衬板均按照我们自己的内部材料规格制造,这些规格比“标准”铸造材料规格更严格。
勃格维克 拥有超过 10000 种磨损零件的模具,以适合世界上最受欢迎的破碎机。我们的模具涵盖颚式破碎机、圆锥破碎机、旋回破碎机、辊式破碎机、锤式破碎机、卧式冲击破碎机和立轴式冲击破碎机。无论您需求什么类型的易损件,勃格维克可能已经有此零件的模具。
我们相信与客户携手合作,开发解决方案,利用我们的实践经验、内部工程和冶金能力以及制造能力,提供满足客户需求的完整解决方案。
立即联系我们,了解我们如何帮助延长使用寿命、提高吞吐量、优化供应链并降低总拥有成本。
Suitable for SANDVIK Crusher Liners
Shanghai Bogvik Wear Material Co., Ltd is one of the most professional crusher parts manufacturer and distributor. We major supply crusher wear parts from 5kgs to 10000kgs in a broad variety of Managnese steel crusher wear parts and alloys steel and chromium iron, Ceramic Insert hammers or blow bars ,Titanium Carbide Insert Liners and crusher spare parts of famous crusher brand .
Wear and spare parts are at the heart of BOGVIK business and we are continually driven to find new and improved ways to optimize component life and equipment performance.
Depending on the application & our clients requirements we offer a range of manganese steel wear parts including Manganese13%, Manganese18% and Manganese22% all with or without chrome & / or molybdenum additions. All manganese liners supplied by BOGVIK are made to our own internal material specifications which are for more stringent than “standard” foundry material specifications.
BOGVIK has in excess of 10000 wear part patterns to fit the world’s most popular crushers. Our patterns cover jaw crushers, cone crushers, gyratory crushers, roll crushers, hammer crushers, horizontal shaft impactors and vertical shaft impactors. No matter what your requirements are, BOGVIK probably already has existing patterns for the wear parts.
We believe in collaboration and work hand-in-hand with our customers to develop solutions that leverages our practical experience, in-house engineering & metallurgical capabilities and manufacturing capacity to provide a complete solution that meets our customer needs.
Contact us today to see how we can help extend service life, improve throughput, optimize supply chain and reduce the total cost of ownership.
sales@bogvik.com
中文:
上海勃格维克耐磨材料有限公司是国内最专业的破碎机配件制造商和经销商之一。我们主要供应从 5 公斤到 10000 公斤的各种锰钢破碎机磨损件和合金钢和铬铁、陶瓷插入锤或板锤、碳化钛插入衬板和著名破碎机品牌的破碎机备件。
磨损和备件是勃格维克 业务的核心,我们不断寻求新的和改进的方法来优化部件寿命和设备性能。
根据应用和我们客户的要求,我们提供一系列锰钢耐磨部件,包括锰13%、锰18% 和锰22%,均添加或不添加铬和/或钼。勃格维克 提供的所有锰衬板均按照我们自己的内部材料规格制造,这些规格比“标准”铸造材料规格更严格。
勃格维克 拥有超过 10000 种磨损零件的模具,以适合世界上最受欢迎的破碎机。我们的模具涵盖颚式破碎机、圆锥破碎机、旋回破碎机、辊式破碎机、锤式破碎机、卧式冲击破碎机和立轴式冲击破碎机。无论您需求什么类型的易损件,勃格维克可能已经有此零件的模具。
我们相信与客户携手合作,开发解决方案,利用我们的实践经验、内部工程和冶金能力以及制造能力,提供满足客户需求的完整解决方案。
立即联系我们,了解我们如何帮助延长使用寿命、提高吞吐量、优化供应链并降低总拥有成本。
12 tic insert liners double the service lifeFernando Zhang
Why is TIC Liner more wearable?
A. The structure and properties of the matrix of the parts have changed. We have increased the content of Mn, Mo, and rare earth.
Therefore, the metallographic grain size of Hadfield steel is refined and the strength is enhanced.
B. The hardness of TIC Insert exceeds HRC60, and the hardness is about 3 times that of Hadfield steel!
The arrangement of Fine Chamber is almost the same as that of rough Chamber. According to the structure of the casting, Feed Size, make some small adjustments, there is no major change.
C. TIC Insert is a mesh-like structure, which is divided into points on the wear part, so as to achieve the purpose of improving the wear resistance of the part as a whole.
For TIC design, our engineers once again improved the design based on the wear curve of the parts you provided.
The size of the ore entering the Fine Chamber is very small, so we reduced the diameter and arrangement spacing of the TIC in order to obtain the best wear effect.
I share these ideas with you to let you fully understand the in-depth research we have done in this project.
Every new project is full of challenges and unknowns, but we are willing to challenge some interesting & valuable projects together with new customer.
How to solve the problem of excessive wear on both ends of Jaw liners? This is a classic case
One of our customers is in Shandong Province, China, and they have 2 crushers to crush iron ore.
One is 36X48 Jaw Crusher
One is 42X54 Jaw Crusher
We are told by customers that when they use OEM Liners, both ends of the Liners wear out very quickly! So productivity quickly dropped.
We filled the two ends of the teeth for our customers, and inlaid a lot of TIC Inserts at both ends.
The service life of the improved Liners is 3.68 times that of OEM Liners!
The customer was very satisfied with this and gave BOGVIK all their orders for Liners from dozens of sites in China
Some stock order parts from BOGVIK
Stock parts can be shipped at any time
If you have any specific needs, please feel free to contact me sales@bogvik.com
10 one of bogvik’s strongest product categories is plates made of manganese s...Fernando Zhang
One of Bogvik’s strongest product categories is plates made of manganese steel for jaw crushers.
This year, BOGVIK launched a new product — BOGVIK TIC plates. These are linings made of the standard alloys C, D and D1 but are reinforced with titanium carbide inserts. They show higher resistance to shock loads and cracking. This effect is achieved by special casting processes and heat treatment of the finished product, and the base alloy is selected in accordance with a rock type.
During the tests, the linings with inserts boasted an operating time that was 1.5 to 4 times more than that of classic manganese steel wear parts without inserts.
If you seek solutions to increase the intervals between plate replacement, reduce the number of maintenance stops, and lower your unit production costs — BOGVIK is what you need.
Contact our crushing&screening department to request individual solutions at: sales@bogvik.com
Ready to ship to the U.S.
Ready to ship to the U.S.
A reliable manufacturer of spare and wear parts and a supplier of engineering solutions for mining and construction equipment
sales@bogvik.com
Jaquess 36X48 Jaw
Our Customer would like to fill both ends to 18" F.I.E.
Just like in the photo, this design will be more durable。
If the crusher operates in very abrasive conditions at a very tight css then bottom of the jaws wear very quickly, fill jaw at both ends will help. But when you crush rock it expands by volume, corrugations allow this to occur, with this type of jaw enormous stress is transferred into the lower jaw frame and pitman/ bearings.
If rock is abrasive and soft no big deal, if its abrasive and tough, it can cause big issues.
We saw this problem with 50X60 Jaw at Huzhou quarry outside Shanghai.
So if possible good to know actual application and type of rock to decide best option.
Nip angle in crushing chamber is very important, smaller the better which is why thicker jaws with curve are requested by many people.
Shanghai Bogvik Wear Material Co., Ltd (BOGVIK)is one of the most professional crusher parts manufacturer and distributor. We major supply crusher wear parts from 5kgs to 10000kgs in a broad variety of high managnese steel crusher wear parts and heat resistant steel alloys and iron, and crusher spare parts of famous crusher brand .
Our advantage: "Three Goods " --Good Quality. We adopt advance ALKALI PHENOLIC RESIN SAND production line ensure casting quality, Supply stable, good quality parts for any customers. Our foundry is located in Sichuan province, foundry area: 25000 square meter, 150 professional workers, productions capacity: 20000tons per year, whole production line adopts the international most advanced ALKALI PHENOLIC RESIN SAND molding process, completely solve the traditional production process which is difficult to overcome the blowhole, impacted sand and surface micro crack problems, greatly improve the product quality of wear parts. --Good Service ;
We could measure and design parts which customer enquiry. And customers could benefit from parts wear life, with lower processing costs. We have quality track system for sales parts, if parts happened to any quality problem, customers only tell us casting NO. And we could track parts quickly and solve problem at the first time. --Good Delivery ; Advanced production line greatly improves production efficiency, Shorts the delivery time, ensure the delivery time in time. Above advantages helps us to become increasingly competitive in the provision of crusher wear spare parts and services for domestic and international customers. Now introduce our foundry simply as follows, welcome to visit our foundry warmly and hope to build cooperation with you .
Thank you in advance for your attention to the certainty of good business.
Shanghai Bogvik Wear Material Co., Ltd is one of the most professional crusher parts manufacturer and distributor. We major supply crusher wear parts from 5kgs to 10000kgs in a broad variety of Managnese steel crusher wear parts and alloys steel and chromium iron, Ceramic Insert hammers or blow bars ,Titanium Carbide Insert Liners and crusher spare parts of famous crusher brand .
Wear and spare parts are at the heart of BOGVIK business and we are continually driven to find new and improved ways to optimize component life and equipment performance.
Depending on the application & our clients requirements we offer a range of manganese steel wear parts including Manganese13%, Manganese18% and Manganese22% all with or without chrome & / or molybdenum additions. All manganese liners supplied by BOGVIK are made to our own internal material specifications which are for more stringent than “standard” foundry material specifications.
BOGVIK has in excess of 10000 wear part patterns to fit the world’s most popular crushers. Our patterns cover jaw crushers, cone crushers, gyratory crushers, roll crushers, hammer crushers, horizontal shaft impactors and vertical shaft impactors. No matter what your requirements are, BOGVIK probably already has existing patterns for the wear parts.
We believe in collaboration and work hand-in-hand with our customers to develop solutions that leverages our practical experience, in-house engineering & metallurgical capabilities and manufacturing capacity to provide a complete solution that meets our customer needs.
Contact us today to see how we can help extend service life, improve throughput, optimize supply chain and reduce the total cost of ownership.
sales@bogvik.com
中文:
上海勃格维克耐磨材料有限公司是国内最专业的破碎机配件制造商和经销商之一。我们主要供应从 5 公斤到 10000 公斤的各种锰钢破碎机磨损件和合金钢和铬铁、陶瓷插入锤或板锤、碳化钛插入衬板和著名破碎机品牌的破碎机备件。
磨损和备件是勃格维克 业务的核心,我们不断寻求新的和改进的方法来优化部件寿命和设备性能。
根据应用和我们客户的要求,我们提供一系列锰钢耐磨部件,包括锰13%、锰18% 和锰22%,均添加或不添加铬和/或钼。勃格维克 提供的所有锰衬板均按照我们自己的内部材料规格制造,这些规格比“标准”铸造材料规格更严格。
勃格维克 拥有超过 10000 种磨损零件的模具,以适合世界上最受欢迎的破碎机。我们的模具涵盖颚式破碎机、圆锥破碎机、旋回破碎机、辊式破碎机、锤式破碎机、卧式冲击破碎机和立轴式冲击破碎机。无论您需求什么类型的易损件,勃格维克可能已经有此零件的模具。
我们相信与客户携手合作,开发解决方案,利用我们的实践经验、内部工程和冶金能力以及制造能力,提供满足客户需求的完整解决方案。
立即联系我们,了解我们如何帮助延长使用寿命、提高吞吐量、优化供应链并降低总拥有成本。
Suitable for SANDVIK Crusher Liners
Shanghai Bogvik Wear Material Co., Ltd is one of the most professional crusher parts manufacturer and distributor. We major supply crusher wear parts from 5kgs to 10000kgs in a broad variety of Managnese steel crusher wear parts and alloys steel and chromium iron, Ceramic Insert hammers or blow bars ,Titanium Carbide Insert Liners and crusher spare parts of famous crusher brand .
Wear and spare parts are at the heart of BOGVIK business and we are continually driven to find new and improved ways to optimize component life and equipment performance.
Depending on the application & our clients requirements we offer a range of manganese steel wear parts including Manganese13%, Manganese18% and Manganese22% all with or without chrome & / or molybdenum additions. All manganese liners supplied by BOGVIK are made to our own internal material specifications which are for more stringent than “standard” foundry material specifications.
BOGVIK has in excess of 10000 wear part patterns to fit the world’s most popular crushers. Our patterns cover jaw crushers, cone crushers, gyratory crushers, roll crushers, hammer crushers, horizontal shaft impactors and vertical shaft impactors. No matter what your requirements are, BOGVIK probably already has existing patterns for the wear parts.
We believe in collaboration and work hand-in-hand with our customers to develop solutions that leverages our practical experience, in-house engineering & metallurgical capabilities and manufacturing capacity to provide a complete solution that meets our customer needs.
Contact us today to see how we can help extend service life, improve throughput, optimize supply chain and reduce the total cost of ownership.
sales@bogvik.com
中文:
上海勃格维克耐磨材料有限公司是国内最专业的破碎机配件制造商和经销商之一。我们主要供应从 5 公斤到 10000 公斤的各种锰钢破碎机磨损件和合金钢和铬铁、陶瓷插入锤或板锤、碳化钛插入衬板和著名破碎机品牌的破碎机备件。
磨损和备件是勃格维克 业务的核心,我们不断寻求新的和改进的方法来优化部件寿命和设备性能。
根据应用和我们客户的要求,我们提供一系列锰钢耐磨部件,包括锰13%、锰18% 和锰22%,均添加或不添加铬和/或钼。勃格维克 提供的所有锰衬板均按照我们自己的内部材料规格制造,这些规格比“标准”铸造材料规格更严格。
勃格维克 拥有超过 10000 种磨损零件的模具,以适合世界上最受欢迎的破碎机。我们的模具涵盖颚式破碎机、圆锥破碎机、旋回破碎机、辊式破碎机、锤式破碎机、卧式冲击破碎机和立轴式冲击破碎机。无论您需求什么类型的易损件,勃格维克可能已经有此零件的模具。
我们相信与客户携手合作,开发解决方案,利用我们的实践经验、内部工程和冶金能力以及制造能力,提供满足客户需求的完整解决方案。
立即联系我们,了解我们如何帮助延长使用寿命、提高吞吐量、优化供应链并降低总拥有成本。
12 tic insert liners double the service lifeFernando Zhang
Why is TIC Liner more wearable?
A. The structure and properties of the matrix of the parts have changed. We have increased the content of Mn, Mo, and rare earth.
Therefore, the metallographic grain size of Hadfield steel is refined and the strength is enhanced.
B. The hardness of TIC Insert exceeds HRC60, and the hardness is about 3 times that of Hadfield steel!
The arrangement of Fine Chamber is almost the same as that of rough Chamber. According to the structure of the casting, Feed Size, make some small adjustments, there is no major change.
C. TIC Insert is a mesh-like structure, which is divided into points on the wear part, so as to achieve the purpose of improving the wear resistance of the part as a whole.
For TIC design, our engineers once again improved the design based on the wear curve of the parts you provided.
The size of the ore entering the Fine Chamber is very small, so we reduced the diameter and arrangement spacing of the TIC in order to obtain the best wear effect.
I share these ideas with you to let you fully understand the in-depth research we have done in this project.
Every new project is full of challenges and unknowns, but we are willing to challenge some interesting & valuable projects together with new customer.
How to solve the problem of excessive wear on both ends of Jaw liners? This is a classic case
One of our customers is in Shandong Province, China, and they have 2 crushers to crush iron ore.
One is 36X48 Jaw Crusher
One is 42X54 Jaw Crusher
We are told by customers that when they use OEM Liners, both ends of the Liners wear out very quickly! So productivity quickly dropped.
We filled the two ends of the teeth for our customers, and inlaid a lot of TIC Inserts at both ends.
The service life of the improved Liners is 3.68 times that of OEM Liners!
The customer was very satisfied with this and gave BOGVIK all their orders for Liners from dozens of sites in China
Some stock order parts from BOGVIK
Stock parts can be shipped at any time
If you have any specific needs, please feel free to contact me sales@bogvik.com
10 one of bogvik’s strongest product categories is plates made of manganese s...Fernando Zhang
One of Bogvik’s strongest product categories is plates made of manganese steel for jaw crushers.
This year, BOGVIK launched a new product — BOGVIK TIC plates. These are linings made of the standard alloys C, D and D1 but are reinforced with titanium carbide inserts. They show higher resistance to shock loads and cracking. This effect is achieved by special casting processes and heat treatment of the finished product, and the base alloy is selected in accordance with a rock type.
During the tests, the linings with inserts boasted an operating time that was 1.5 to 4 times more than that of classic manganese steel wear parts without inserts.
If you seek solutions to increase the intervals between plate replacement, reduce the number of maintenance stops, and lower your unit production costs — BOGVIK is what you need.
Contact our crushing&screening department to request individual solutions at: sales@bogvik.com
Ready to ship to the U.S.
Ready to ship to the U.S.
A reliable manufacturer of spare and wear parts and a supplier of engineering solutions for mining and construction equipment
sales@bogvik.com
Jaquess 36X48 Jaw
Our Customer would like to fill both ends to 18" F.I.E.
Just like in the photo, this design will be more durable。
If the crusher operates in very abrasive conditions at a very tight css then bottom of the jaws wear very quickly, fill jaw at both ends will help. But when you crush rock it expands by volume, corrugations allow this to occur, with this type of jaw enormous stress is transferred into the lower jaw frame and pitman/ bearings.
If rock is abrasive and soft no big deal, if its abrasive and tough, it can cause big issues.
We saw this problem with 50X60 Jaw at Huzhou quarry outside Shanghai.
So if possible good to know actual application and type of rock to decide best option.
Nip angle in crushing chamber is very important, smaller the better which is why thicker jaws with curve are requested by many people.
Kleemann Crusher Liners
MCO9 Crusher Liners
Crushing cone standard Cone S Part No. 2450546
Crushing shell standard fine Shell SF Part No. 2450551
MCO9 Crusher Liners
Crushing cone standard Cone S Part No. 2295672
Crushing shell standard medium Shell SM 2295649
C125 1P Quarry Type Jaw Plate
N11954343 JAW, FIXED QUARRY 1P 40mm Thick
N11954353 JAW MVBL QUARRY 1P Standard
It is suitable for quarry, and the use time is longer than OEM standard!
Contact BOGVIK for a quote: sales@bogvik.com
Shanghai Bogvik Wear Material Co., Ltd is one of the most professional crusher parts manufacturer and distributor. We major supply crusher wear parts from 5kgs to 10000kgs in a broad variety of Managnese steel crusher wear parts and alloys steel and chromium iron, Ceramic Insert hammers or blow bars ,Titanium Carbide Insert Liners and crusher spare parts of famous crusher brand .
Wear and spare parts are at the heart of BOGVIK business and we are continually driven to find new and improved ways to optimize component life and equipment performance.
Depending on the application & our clients requirements we offer a range of manganese steel wear parts including Manganese13%, Manganese18% and Manganese22% all with or without chrome & / or molybdenum additions. All manganese liners supplied by BOGVIK are made to our own internal material specifications which are for more stringent than “standard” foundry material specifications.
BOGVIK has in excess of 10000 wear part patterns to fit the world’s most popular crushers. Our patterns cover jaw crushers, cone crushers, gyratory crushers, roll crushers, hammer crushers, horizontal shaft impactors and vertical shaft impactors. No matter what your requirements are, BOGVIK probably already has existing patterns for the wear parts.
We believe in collaboration and work hand-in-hand with our customers to develop solutions that leverages our practical experience, in-house engineering & metallurgical capabilities and manufacturing capacity to provide a complete solution that meets our customer needs.
Contact us today to see how we can help extend service life, improve throughput, optimize supply chain and reduce the total cost of ownership.
sales@bogvik.com
上海勃格维克耐磨材料有限公司是国内最专业的破碎机配件制造商和经销商之一。我们主要供应从 5 公斤到 10000 公斤的各种锰钢破碎机磨损件和合金钢和铬铁、陶瓷插入锤或板锤、碳化钛插入衬板和著名破碎机品牌的破碎机备件。
磨损和备件是勃格维克 业务的核心,我们不断寻求新的和改进的方法来优化部件寿命和设备性能。
根据应用和我们客户的要求,我们提供一系列锰钢耐磨部件,包括锰13%、锰18% 和锰22%,均添加或不添加铬和/或钼。勃格维克 提供的所有锰衬板均按照我们自己的内部材料规格制造,这些规格比“标准”铸造材料规格更严格。
勃格维克 拥有超过 10000 种磨损零件的模具,以适合世界上最受欢迎的破碎机。我们的模具涵盖颚式破碎机、圆锥破碎机、旋回破碎机、辊式破碎机、锤式破碎机、卧式冲击破碎机和立轴式冲击破碎机。无论您需求什么类型的易损件,勃格维克可能已经有此零件的模具。
我们相信与客户携手合作,开发解决方案,利用我们的实践经验、内部工程和冶金能力以及制造能力,提供满足客户需求的完整解决方案。
立即联系我们,了解我们如何帮助延长使用寿命、提高吞吐量、优化供应链并降低总拥有成本。
MP1000 New Design
Mantle SPE STD F OS MX2 MM1564689 6284KG/PCS
Bowl Liners STD F MM1603957 5912KG/PCS
Original Equipment Replacement MP1000 Cone Crusher Parts
High quality cone crusher parts are a perfect fit
TIC Insert Jaw Crusher Wear Parts Manufacturer
BOGVIK has improved our customer Crusher Liners by TIC (titanium carbide) insert. BOGVIK TIC insert Crusher Liners are designed to improve efficiency and reduce costs by extending wear life and minimizing downtime. Compare with normal manganese crusher liners, our TIC insert wear parts span life can be 2-3 times. Based on our customer feedback, the more hard material to crush, the longer span life.
Benefits
2-3 times span life than normal manganese Crusher Liners
TIC insert Crusher Liners can decrease your plant downtime
Higher cost performance compare with normal manganese Crusher Liners
More easily to install
Original equipment replacement MP1000 cone crusher parts ensure proper fit, form and function to reduce maintenance issues and increase longevity. If your equipment fails, productivity of your entire plant is at risk. To avoid such losses, you must be sure critical replacement parts are readily available when you need them.
BOGVIK provides a complete offering, for both standard and engineered-to-order parts, ensuring you have the availability and support required. We provide flexible options to secure parts on a one-time basis, as a turn-key service, or anywhere in between.
Wear parts
Feed cone
Main frame liners
Mantle liners
Bowl liners
Protection cones
Arm guards
01 bogvik customizes the sandvik ch550 for customers with different chamber l...Fernando Zhang
BOGVIK customizes the CH550 for customers with different Chamber liners
CH550 CONCAVE F 452.8600-001
CH550 MANTLE B 452.8602-001
CH550 CONCAVE EC TOP GRIP 452.7843-001
CH550 MANTLE A 452.7626-001
CH550 CONCAVE C 452.8500-001
CH550 FILLER RING C 452.7388-001
CH550 CONCAVE MC 452.8496-001
CH550 CONCAVE M 452.8601-001
CH550 FILLER RING M 452.7386-001
CH550 MANTLE FF BG00133846-01
Hi Morning!
BOGVIK has in excess of 10000 wear part patterns to fit the world’s most popular crushers. Our patterns cover jaw crushers, cone crushers, gyratory crushers, roll crushers, hammer crushers, horizontal shaft impactors and vertical shaft impactors. No matter what your requirements are, BOGVIK probably already has existing patterns for the wear parts.
Depending on the application & our clients requirements we offer a range of manganese steel wear parts including Mn13%, Mn18% and Mn22% all with or without chrome & / or molybdenum additions. All manganese liners supplied by BOGVIK are made to our own internal material specifications which are for more stringent than “standard” foundry material specifications.
Dear Valued BOGVIK Customers,
We have already come back to the office after enjoying a pleasant CNY holiday. All orders can be proceeded as scheduled.
Any new inquiry, Kindly feel free to contact me.
Looking forward to further cooperation in 2021.
Rgeards
Fernando
Customized solutions for wear parts
Since establishment in 1996, BOGVIK has become a major supplier of Crusher wear parts. Our wear parts are known for their guaranteed outstanding performance and are widely accepted by original equipment manufacturers, major mining houses and aggregate producing companies worldwide.
BOGVIK has in excess of 10000 wear part patterns to fit the world’s most popular crushers. Our patterns cover jaw crushers, cone crushers, gyratory crushers, roll crushers, hammer crushers, horizontal shaft impactors and vertical shaft impactors. No matter what your requirements are, BOGVIK probably already has existing patterns for the wear parts.
Depending on the application & our clients requirements we offer a range of manganese steel wear parts including Mn13%, Mn18% and Mn22% all with or without chrome & / or molybdenum additions. All manganese liners supplied by BOGVIK are made to our own internal material specifications which are for more stringent than “standard” foundry material specifications.
Here are some of our recent excellent work for your reference:
Wear and spare parts are at the heart of BOGVIK business and we are continually driven to find new and improved ways to optimize component life and equipment performance.
We believe in collaboration and work hand-in-hand with our customers to develop solutions that leverages our practical experience, in-house engineering & metallurgical capabilities and manufacturing capacity to provide a complete solution that meets our customer needs.
Contact us today to see how we can help extend service life, improve throughput, optimize supply chain and reduce the total cost of ownership.
Wear and spare parts are at the heart of BOGVIK business and we are continually driven to find new and improved ways to optimize component life and equipment performance.
We believe in collaboration and work hand-in-hand with our customers to develop solutions that leverages our practical experience, in-house engineering & metallurgical capabilities and manufacturing capacity to provide a complete solution that meets our customer needs.
Contact us today to see how we can help extend service life, improve throughput, optimize supply chain and reduce the total cost of ownership.
Wear and spare parts are at the heart of BOGVIK business and we are continually driven to find new and improved ways to optimize component life and equipment performance.
We believe in collaboration and work hand-in-hand with our customers to develop solutions that leverages our practical experience, in-house engineering & metallurgical capabilities and manufacturing capacity to provide a complete solution that meets our customer needs.
Contact us today to see how we can help extend service life, improve throughput, optimize supply chain and reduce the total cost of ownership.
Wear and spare parts are at the heart of BOGVIK business and we are continually driven to find new and improved ways to optimize component life and equipment performance.
We believe in collaboration and work hand-in-hand with our customers to develop solutions that leverages our practical experience, in-house engineering & metallurgical capabilities and manufacturing capacity to provide a complete solution that meets our customer needs.
Contact us today to see how we can help extend service life, improve throughput, optimize supply chain and reduce the total cost of ownership.
Wear and spare parts are at the heart of BOGVIK business and we are continually driven to find new and improved ways to optimize component life and equipment performance.
We believe in collaboration and work hand-in-hand with our customers to develop solutions that leverages our practical experience, in-house engineering & metallurgical capabilities and manufacturing capacity to provide a complete solution that meets our customer needs.
Contact us today to see how we can help extend service life, improve throughput, optimize supply chain and reduce the total cost of ownership.
Wear and spare parts are at the heart of BOGVIK business and we are continually driven to find new and improved ways to optimize component life and equipment performance.
We believe in collaboration and work hand-in-hand with our customers to develop solutions that leverages our practical experience, in-house engineering & metallurgical capabilities and manufacturing capacity to provide a complete solution that meets our customer needs.
Contact us today to see how we can help extend service life, improve throughput, optimize supply chain and reduce the total cost of ownership.
Wear and spare parts are at the heart of BOGVIK business and we are continually driven to find new and improved ways to optimize component life and equipment performance.
We believe in collaboration and work hand-in-hand with our customers to develop solutions that leverages our practical experience, in-house engineering & metallurgical capabilities and manufacturing capacity to provide a complete solution that meets our customer needs.
Contact us today to see how we can help extend service life, improve throughput, optimize supply chain and reduce the total cost of ownership.
Shanghai Bogvik Wear Material Co., Ltd (BOGVIK)is one of the most professional crusher parts manufacturer and distributor. We major supply crusher wear parts from 5kgs to 10000kgs in a broad variety of high managnese steel crusher wear parts and heat resistant steel alloys and iron, and crusher spare parts of famous crusher brand .
Our advantage: "Three Goods " --Good Quality. We adopt advance ALKALI PHENOLIC RESIN SAND production line ensure casting quality, Supply stable, good quality parts for any customers. Our foundry is located in Sichuan province, foundry area: 25000 square meter, 150 professional workers, productions capacity: 20000tons per year, whole production line adopts the international most advanced ALKALI PHENOLIC RESIN SAND molding process, completely solve the traditional production process which is difficult to overcome the blowhole, impacted sand and surface micro crack problems, greatly improve the product quality of wear parts. --Good Service ;
We could measure and design parts which customer enquiry. And customers could benefit from parts wear life, with lower processing costs. We have quality track system for sales parts, if parts happened to any quality problem, customers only tell us casting NO. And we could track parts quickly and solve problem at the first time. --Good Delivery ; Advanced production line greatly improves production efficiency, Shorts the delivery time, ensure the delivery time in time. Above advantages helps us to become increasingly competitive in the provision of crusher wear spare parts and services for domestic and international customers. Now introduce our foundry simply as follows, welcome to visit our foundry warmly and hope to build cooperation with you .
Thank you in advance for your attention to the certainty of good business.
Shanghai Bogvik Wear Material Co., Ltd (BOGVIK)is one of the most professional crusher parts manufacturer and distributor. We major supply crusher wear parts from 5kgs to 10000kgs in a broad variety of high managnese steel crusher wear parts and heat resistant steel alloys and iron, and crusher spare parts of famous crusher brand .
Our advantage: "Three Goods " --Good Quality. We adopt advance ALKALI PHENOLIC RESIN SAND production line ensure casting quality, Supply stable, good quality parts for any customers. Our foundry is located in Sichuan province, foundry area: 25000 square meter, 150 professional workers, productions capacity: 20000tons per year, whole production line adopts the international most advanced ALKALI PHENOLIC RESIN SAND molding process, completely solve the traditional production process which is difficult to overcome the blowhole, impacted sand and surface micro crack problems, greatly improve the product quality of wear parts. --Good Service ;
We could measure and design parts which customer enquiry. And customers could benefit from parts wear life, with lower processing costs. We have quality track system for sales parts, if parts happened to any quality problem, customers only tell us casting NO. And we could track parts quickly and solve problem at the first time. --Good Delivery ; Advanced production line greatly improves production efficiency, Shorts the delivery time, ensure the delivery time in time. Above advantages helps us to become increasingly competitive in the provision of crusher wear spare parts and services for domestic and international customers. Now introduce our foundry simply as follows, welcome to visit our foundry warmly and hope to build cooperation with you .
Thank you in advance for your attention to the certainty of good business.
Shanghai Bogvik Wear Material Co., Ltd (BOGVIK)is one of the most professional crusher parts manufacturer and distributor. We major supply crusher wear parts from 5kgs to 10000kgs in a broad variety of high managnese steel crusher wear parts and heat resistant steel alloys and iron, and crusher spare parts of famous crusher brand .
Our advantage: "Three Goods " --Good Quality. We adopt advance ALKALI PHENOLIC RESIN SAND production line ensure casting quality, Supply stable, good quality parts for any customers. Our foundry is located in Sichuan province, foundry area: 25000 square meter, 150 professional workers, productions capacity: 20000tons per year, whole production line adopts the international most advanced ALKALI PHENOLIC RESIN SAND molding process, completely solve the traditional production process which is difficult to overcome the blowhole, impacted sand and surface micro crack problems, greatly improve the product quality of wear parts. --Good Service ;
We could measure and design parts which customer enquiry. And customers could benefit from parts wear life, with lower processing costs. We have quality track system for sales parts, if parts happened to any quality problem, customers only tell us casting NO. And we could track parts quickly and solve problem at the first time. --Good Delivery ; Advanced production line greatly improves production efficiency, Shorts the delivery time, ensure the delivery time in time. Above advantages helps us to become increasingly competitive in the provision of crusher wear spare parts and services for domestic and international customers. Now introduce our foundry simply as follows, welcome to visit our foundry warmly and hope to build cooperation with you .
Thank you in advance for your attention to the certainty of good business.
ACEP Magazine edition 4th launched on 05.06.2024Rahul
This document provides information about the third edition of the magazine "Sthapatya" published by the Association of Civil Engineers (Practicing) Aurangabad. It includes messages from current and past presidents of ACEP, memories and photos from past ACEP events, information on life time achievement awards given by ACEP, and a technical article on concrete maintenance, repairs and strengthening. The document highlights activities of ACEP and provides a technical educational article for members.
HEAP SORT ILLUSTRATED WITH HEAPIFY, BUILD HEAP FOR DYNAMIC ARRAYS.
Heap sort is a comparison-based sorting technique based on Binary Heap data structure. It is similar to the selection sort where we first find the minimum element and place the minimum element at the beginning. Repeat the same process for the remaining elements.
Kleemann Crusher Liners
MCO9 Crusher Liners
Crushing cone standard Cone S Part No. 2450546
Crushing shell standard fine Shell SF Part No. 2450551
MCO9 Crusher Liners
Crushing cone standard Cone S Part No. 2295672
Crushing shell standard medium Shell SM 2295649
C125 1P Quarry Type Jaw Plate
N11954343 JAW, FIXED QUARRY 1P 40mm Thick
N11954353 JAW MVBL QUARRY 1P Standard
It is suitable for quarry, and the use time is longer than OEM standard!
Contact BOGVIK for a quote: sales@bogvik.com
Shanghai Bogvik Wear Material Co., Ltd is one of the most professional crusher parts manufacturer and distributor. We major supply crusher wear parts from 5kgs to 10000kgs in a broad variety of Managnese steel crusher wear parts and alloys steel and chromium iron, Ceramic Insert hammers or blow bars ,Titanium Carbide Insert Liners and crusher spare parts of famous crusher brand .
Wear and spare parts are at the heart of BOGVIK business and we are continually driven to find new and improved ways to optimize component life and equipment performance.
Depending on the application & our clients requirements we offer a range of manganese steel wear parts including Manganese13%, Manganese18% and Manganese22% all with or without chrome & / or molybdenum additions. All manganese liners supplied by BOGVIK are made to our own internal material specifications which are for more stringent than “standard” foundry material specifications.
BOGVIK has in excess of 10000 wear part patterns to fit the world’s most popular crushers. Our patterns cover jaw crushers, cone crushers, gyratory crushers, roll crushers, hammer crushers, horizontal shaft impactors and vertical shaft impactors. No matter what your requirements are, BOGVIK probably already has existing patterns for the wear parts.
We believe in collaboration and work hand-in-hand with our customers to develop solutions that leverages our practical experience, in-house engineering & metallurgical capabilities and manufacturing capacity to provide a complete solution that meets our customer needs.
Contact us today to see how we can help extend service life, improve throughput, optimize supply chain and reduce the total cost of ownership.
sales@bogvik.com
上海勃格维克耐磨材料有限公司是国内最专业的破碎机配件制造商和经销商之一。我们主要供应从 5 公斤到 10000 公斤的各种锰钢破碎机磨损件和合金钢和铬铁、陶瓷插入锤或板锤、碳化钛插入衬板和著名破碎机品牌的破碎机备件。
磨损和备件是勃格维克 业务的核心,我们不断寻求新的和改进的方法来优化部件寿命和设备性能。
根据应用和我们客户的要求,我们提供一系列锰钢耐磨部件,包括锰13%、锰18% 和锰22%,均添加或不添加铬和/或钼。勃格维克 提供的所有锰衬板均按照我们自己的内部材料规格制造,这些规格比“标准”铸造材料规格更严格。
勃格维克 拥有超过 10000 种磨损零件的模具,以适合世界上最受欢迎的破碎机。我们的模具涵盖颚式破碎机、圆锥破碎机、旋回破碎机、辊式破碎机、锤式破碎机、卧式冲击破碎机和立轴式冲击破碎机。无论您需求什么类型的易损件,勃格维克可能已经有此零件的模具。
我们相信与客户携手合作,开发解决方案,利用我们的实践经验、内部工程和冶金能力以及制造能力,提供满足客户需求的完整解决方案。
立即联系我们,了解我们如何帮助延长使用寿命、提高吞吐量、优化供应链并降低总拥有成本。
MP1000 New Design
Mantle SPE STD F OS MX2 MM1564689 6284KG/PCS
Bowl Liners STD F MM1603957 5912KG/PCS
Original Equipment Replacement MP1000 Cone Crusher Parts
High quality cone crusher parts are a perfect fit
TIC Insert Jaw Crusher Wear Parts Manufacturer
BOGVIK has improved our customer Crusher Liners by TIC (titanium carbide) insert. BOGVIK TIC insert Crusher Liners are designed to improve efficiency and reduce costs by extending wear life and minimizing downtime. Compare with normal manganese crusher liners, our TIC insert wear parts span life can be 2-3 times. Based on our customer feedback, the more hard material to crush, the longer span life.
Benefits
2-3 times span life than normal manganese Crusher Liners
TIC insert Crusher Liners can decrease your plant downtime
Higher cost performance compare with normal manganese Crusher Liners
More easily to install
Original equipment replacement MP1000 cone crusher parts ensure proper fit, form and function to reduce maintenance issues and increase longevity. If your equipment fails, productivity of your entire plant is at risk. To avoid such losses, you must be sure critical replacement parts are readily available when you need them.
BOGVIK provides a complete offering, for both standard and engineered-to-order parts, ensuring you have the availability and support required. We provide flexible options to secure parts on a one-time basis, as a turn-key service, or anywhere in between.
Wear parts
Feed cone
Main frame liners
Mantle liners
Bowl liners
Protection cones
Arm guards
01 bogvik customizes the sandvik ch550 for customers with different chamber l...Fernando Zhang
BOGVIK customizes the CH550 for customers with different Chamber liners
CH550 CONCAVE F 452.8600-001
CH550 MANTLE B 452.8602-001
CH550 CONCAVE EC TOP GRIP 452.7843-001
CH550 MANTLE A 452.7626-001
CH550 CONCAVE C 452.8500-001
CH550 FILLER RING C 452.7388-001
CH550 CONCAVE MC 452.8496-001
CH550 CONCAVE M 452.8601-001
CH550 FILLER RING M 452.7386-001
CH550 MANTLE FF BG00133846-01
Hi Morning!
BOGVIK has in excess of 10000 wear part patterns to fit the world’s most popular crushers. Our patterns cover jaw crushers, cone crushers, gyratory crushers, roll crushers, hammer crushers, horizontal shaft impactors and vertical shaft impactors. No matter what your requirements are, BOGVIK probably already has existing patterns for the wear parts.
Depending on the application & our clients requirements we offer a range of manganese steel wear parts including Mn13%, Mn18% and Mn22% all with or without chrome & / or molybdenum additions. All manganese liners supplied by BOGVIK are made to our own internal material specifications which are for more stringent than “standard” foundry material specifications.
Dear Valued BOGVIK Customers,
We have already come back to the office after enjoying a pleasant CNY holiday. All orders can be proceeded as scheduled.
Any new inquiry, Kindly feel free to contact me.
Looking forward to further cooperation in 2021.
Rgeards
Fernando
Customized solutions for wear parts
Since establishment in 1996, BOGVIK has become a major supplier of Crusher wear parts. Our wear parts are known for their guaranteed outstanding performance and are widely accepted by original equipment manufacturers, major mining houses and aggregate producing companies worldwide.
BOGVIK has in excess of 10000 wear part patterns to fit the world’s most popular crushers. Our patterns cover jaw crushers, cone crushers, gyratory crushers, roll crushers, hammer crushers, horizontal shaft impactors and vertical shaft impactors. No matter what your requirements are, BOGVIK probably already has existing patterns for the wear parts.
Depending on the application & our clients requirements we offer a range of manganese steel wear parts including Mn13%, Mn18% and Mn22% all with or without chrome & / or molybdenum additions. All manganese liners supplied by BOGVIK are made to our own internal material specifications which are for more stringent than “standard” foundry material specifications.
Here are some of our recent excellent work for your reference:
Wear and spare parts are at the heart of BOGVIK business and we are continually driven to find new and improved ways to optimize component life and equipment performance.
We believe in collaboration and work hand-in-hand with our customers to develop solutions that leverages our practical experience, in-house engineering & metallurgical capabilities and manufacturing capacity to provide a complete solution that meets our customer needs.
Contact us today to see how we can help extend service life, improve throughput, optimize supply chain and reduce the total cost of ownership.
Wear and spare parts are at the heart of BOGVIK business and we are continually driven to find new and improved ways to optimize component life and equipment performance.
We believe in collaboration and work hand-in-hand with our customers to develop solutions that leverages our practical experience, in-house engineering & metallurgical capabilities and manufacturing capacity to provide a complete solution that meets our customer needs.
Contact us today to see how we can help extend service life, improve throughput, optimize supply chain and reduce the total cost of ownership.
Wear and spare parts are at the heart of BOGVIK business and we are continually driven to find new and improved ways to optimize component life and equipment performance.
We believe in collaboration and work hand-in-hand with our customers to develop solutions that leverages our practical experience, in-house engineering & metallurgical capabilities and manufacturing capacity to provide a complete solution that meets our customer needs.
Contact us today to see how we can help extend service life, improve throughput, optimize supply chain and reduce the total cost of ownership.
Wear and spare parts are at the heart of BOGVIK business and we are continually driven to find new and improved ways to optimize component life and equipment performance.
We believe in collaboration and work hand-in-hand with our customers to develop solutions that leverages our practical experience, in-house engineering & metallurgical capabilities and manufacturing capacity to provide a complete solution that meets our customer needs.
Contact us today to see how we can help extend service life, improve throughput, optimize supply chain and reduce the total cost of ownership.
Wear and spare parts are at the heart of BOGVIK business and we are continually driven to find new and improved ways to optimize component life and equipment performance.
We believe in collaboration and work hand-in-hand with our customers to develop solutions that leverages our practical experience, in-house engineering & metallurgical capabilities and manufacturing capacity to provide a complete solution that meets our customer needs.
Contact us today to see how we can help extend service life, improve throughput, optimize supply chain and reduce the total cost of ownership.
Wear and spare parts are at the heart of BOGVIK business and we are continually driven to find new and improved ways to optimize component life and equipment performance.
We believe in collaboration and work hand-in-hand with our customers to develop solutions that leverages our practical experience, in-house engineering & metallurgical capabilities and manufacturing capacity to provide a complete solution that meets our customer needs.
Contact us today to see how we can help extend service life, improve throughput, optimize supply chain and reduce the total cost of ownership.
Wear and spare parts are at the heart of BOGVIK business and we are continually driven to find new and improved ways to optimize component life and equipment performance.
We believe in collaboration and work hand-in-hand with our customers to develop solutions that leverages our practical experience, in-house engineering & metallurgical capabilities and manufacturing capacity to provide a complete solution that meets our customer needs.
Contact us today to see how we can help extend service life, improve throughput, optimize supply chain and reduce the total cost of ownership.
Shanghai Bogvik Wear Material Co., Ltd (BOGVIK)is one of the most professional crusher parts manufacturer and distributor. We major supply crusher wear parts from 5kgs to 10000kgs in a broad variety of high managnese steel crusher wear parts and heat resistant steel alloys and iron, and crusher spare parts of famous crusher brand .
Our advantage: "Three Goods " --Good Quality. We adopt advance ALKALI PHENOLIC RESIN SAND production line ensure casting quality, Supply stable, good quality parts for any customers. Our foundry is located in Sichuan province, foundry area: 25000 square meter, 150 professional workers, productions capacity: 20000tons per year, whole production line adopts the international most advanced ALKALI PHENOLIC RESIN SAND molding process, completely solve the traditional production process which is difficult to overcome the blowhole, impacted sand and surface micro crack problems, greatly improve the product quality of wear parts. --Good Service ;
We could measure and design parts which customer enquiry. And customers could benefit from parts wear life, with lower processing costs. We have quality track system for sales parts, if parts happened to any quality problem, customers only tell us casting NO. And we could track parts quickly and solve problem at the first time. --Good Delivery ; Advanced production line greatly improves production efficiency, Shorts the delivery time, ensure the delivery time in time. Above advantages helps us to become increasingly competitive in the provision of crusher wear spare parts and services for domestic and international customers. Now introduce our foundry simply as follows, welcome to visit our foundry warmly and hope to build cooperation with you .
Thank you in advance for your attention to the certainty of good business.
Shanghai Bogvik Wear Material Co., Ltd (BOGVIK)is one of the most professional crusher parts manufacturer and distributor. We major supply crusher wear parts from 5kgs to 10000kgs in a broad variety of high managnese steel crusher wear parts and heat resistant steel alloys and iron, and crusher spare parts of famous crusher brand .
Our advantage: "Three Goods " --Good Quality. We adopt advance ALKALI PHENOLIC RESIN SAND production line ensure casting quality, Supply stable, good quality parts for any customers. Our foundry is located in Sichuan province, foundry area: 25000 square meter, 150 professional workers, productions capacity: 20000tons per year, whole production line adopts the international most advanced ALKALI PHENOLIC RESIN SAND molding process, completely solve the traditional production process which is difficult to overcome the blowhole, impacted sand and surface micro crack problems, greatly improve the product quality of wear parts. --Good Service ;
We could measure and design parts which customer enquiry. And customers could benefit from parts wear life, with lower processing costs. We have quality track system for sales parts, if parts happened to any quality problem, customers only tell us casting NO. And we could track parts quickly and solve problem at the first time. --Good Delivery ; Advanced production line greatly improves production efficiency, Shorts the delivery time, ensure the delivery time in time. Above advantages helps us to become increasingly competitive in the provision of crusher wear spare parts and services for domestic and international customers. Now introduce our foundry simply as follows, welcome to visit our foundry warmly and hope to build cooperation with you .
Thank you in advance for your attention to the certainty of good business.
Shanghai Bogvik Wear Material Co., Ltd (BOGVIK)is one of the most professional crusher parts manufacturer and distributor. We major supply crusher wear parts from 5kgs to 10000kgs in a broad variety of high managnese steel crusher wear parts and heat resistant steel alloys and iron, and crusher spare parts of famous crusher brand .
Our advantage: "Three Goods " --Good Quality. We adopt advance ALKALI PHENOLIC RESIN SAND production line ensure casting quality, Supply stable, good quality parts for any customers. Our foundry is located in Sichuan province, foundry area: 25000 square meter, 150 professional workers, productions capacity: 20000tons per year, whole production line adopts the international most advanced ALKALI PHENOLIC RESIN SAND molding process, completely solve the traditional production process which is difficult to overcome the blowhole, impacted sand and surface micro crack problems, greatly improve the product quality of wear parts. --Good Service ;
We could measure and design parts which customer enquiry. And customers could benefit from parts wear life, with lower processing costs. We have quality track system for sales parts, if parts happened to any quality problem, customers only tell us casting NO. And we could track parts quickly and solve problem at the first time. --Good Delivery ; Advanced production line greatly improves production efficiency, Shorts the delivery time, ensure the delivery time in time. Above advantages helps us to become increasingly competitive in the provision of crusher wear spare parts and services for domestic and international customers. Now introduce our foundry simply as follows, welcome to visit our foundry warmly and hope to build cooperation with you .
Thank you in advance for your attention to the certainty of good business.
ACEP Magazine edition 4th launched on 05.06.2024Rahul
This document provides information about the third edition of the magazine "Sthapatya" published by the Association of Civil Engineers (Practicing) Aurangabad. It includes messages from current and past presidents of ACEP, memories and photos from past ACEP events, information on life time achievement awards given by ACEP, and a technical article on concrete maintenance, repairs and strengthening. The document highlights activities of ACEP and provides a technical educational article for members.
HEAP SORT ILLUSTRATED WITH HEAPIFY, BUILD HEAP FOR DYNAMIC ARRAYS.
Heap sort is a comparison-based sorting technique based on Binary Heap data structure. It is similar to the selection sort where we first find the minimum element and place the minimum element at the beginning. Repeat the same process for the remaining elements.
Water billing management system project report.pdfKamal Acharya
Our project entitled “Water Billing Management System” aims is to generate Water bill with all the charges and penalty. Manual system that is employed is extremely laborious and quite inadequate. It only makes the process more difficult and hard.
The aim of our project is to develop a system that is meant to partially computerize the work performed in the Water Board like generating monthly Water bill, record of consuming unit of water, store record of the customer and previous unpaid record.
We used HTML/PHP as front end and MYSQL as back end for developing our project. HTML is primarily a visual design environment. We can create a android application by designing the form and that make up the user interface. Adding android application code to the form and the objects such as buttons and text boxes on them and adding any required support code in additional modular.
MySQL is free open source database that facilitates the effective management of the databases by connecting them to the software. It is a stable ,reliable and the powerful solution with the advanced features and advantages which are as follows: Data Security.MySQL is free open source database that facilitates the effective management of the databases by connecting them to the software.
A review on techniques and modelling methodologies used for checking electrom...nooriasukmaningtyas
The proper function of the integrated circuit (IC) in an inhibiting electromagnetic environment has always been a serious concern throughout the decades of revolution in the world of electronics, from disjunct devices to today’s integrated circuit technology, where billions of transistors are combined on a single chip. The automotive industry and smart vehicles in particular, are confronting design issues such as being prone to electromagnetic interference (EMI). Electronic control devices calculate incorrect outputs because of EMI and sensors give misleading values which can prove fatal in case of automotives. In this paper, the authors have non exhaustively tried to review research work concerned with the investigation of EMI in ICs and prediction of this EMI using various modelling methodologies and measurement setups.
We have compiled the most important slides from each speaker's presentation. This year’s compilation, available for free, captures the key insights and contributions shared during the DfMAy 2024 conference.
Online aptitude test management system project report.pdfKamal Acharya
The purpose of on-line aptitude test system is to take online test in an efficient manner and no time wasting for checking the paper. The main objective of on-line aptitude test system is to efficiently evaluate the candidate thoroughly through a fully automated system that not only saves lot of time but also gives fast results. For students they give papers according to their convenience and time and there is no need of using extra thing like paper, pen etc. This can be used in educational institutions as well as in corporate world. Can be used anywhere any time as it is a web based application (user Location doesn’t matter). No restriction that examiner has to be present when the candidate takes the test.
Every time when lecturers/professors need to conduct examinations they have to sit down think about the questions and then create a whole new set of questions for each and every exam. In some cases the professor may want to give an open book online exam that is the student can take the exam any time anywhere, but the student might have to answer the questions in a limited time period. The professor may want to change the sequence of questions for every student. The problem that a student has is whenever a date for the exam is declared the student has to take it and there is no way he can take it at some other time. This project will create an interface for the examiner to create and store questions in a repository. It will also create an interface for the student to take examinations at his convenience and the questions and/or exams may be timed. Thereby creating an application which can be used by examiners and examinee’s simultaneously.
Examination System is very useful for Teachers/Professors. As in the teaching profession, you are responsible for writing question papers. In the conventional method, you write the question paper on paper, keep question papers separate from answers and all this information you have to keep in a locker to avoid unauthorized access. Using the Examination System you can create a question paper and everything will be written to a single exam file in encrypted format. You can set the General and Administrator password to avoid unauthorized access to your question paper. Every time you start the examination, the program shuffles all the questions and selects them randomly from the database, which reduces the chances of memorizing the questions.
Harnessing WebAssembly for Real-time Stateless Streaming PipelinesChristina Lin
Traditionally, dealing with real-time data pipelines has involved significant overhead, even for straightforward tasks like data transformation or masking. However, in this talk, we’ll venture into the dynamic realm of WebAssembly (WASM) and discover how it can revolutionize the creation of stateless streaming pipelines within a Kafka (Redpanda) broker. These pipelines are adept at managing low-latency, high-data-volume scenarios.
1. SHANGHAI BOGVIK WEAR MATERIAL CO., LTD.
WWW.BOGVIK.COM
All manufacturers brands, names, part numbers, model numbers and descriptions are used for reference and
identification purposes only, they are owned by the respective manufacturers. BOGVIK has no affiliation with the
OEM.
w
w
w
.bogvik.com
E:sales@
bogvik.com
M
:+86
15851989372
2. SHANGHAI BOGVIK WEAR MATERIAL CO., LTD.
WWW.BOGVIK.COM
All manufacturers brands, names, part numbers, model numbers and descriptions are used for reference and
identification purposes only, they are owned by the respective manufacturers. BOGVIK has no affiliation with the
OEM.
w
w
w
.bogvik.com
E:sales@
bogvik.com
M
:+86
15851989372
3. Dear firend,
SHANGHAI BOGVIK WEAR MATERIAL CO., LTD.
WWW.BOGVIK.COM
All manufacturers brands, names, part numbers, model numbers and descriptions are used for reference and
identification purposes only, they are owned by the respective manufacturers. BOGVIK has no affiliation with the
OEM.
w
w
w
.bogvik.com
E:sales@
bogvik.com
M
:+86
15851989372
4. Good day to you and all in your company.
Do you have any crusher parts purchase orders in December? I can ship before
the Chinese New Year.(January 25, 2020)
If you have any needs, please let me know.
This is Fernando from SHANGHAI BOGVIK WEAR MATERIAL CO., LTD. As usual,
last week our production department has also produced lots of new finished products
about well-known crusher wear parts. Please kindly look through the following
presentation in case you have similar demands in this moment.
BOGVIK Products Presentation ---
METSO
SHANGHAI BOGVIK WEAR MATERIAL CO., LTD.
WWW.BOGVIK.COM
All manufacturers brands, names, part numbers, model numbers and descriptions are used for reference and
identification purposes only, they are owned by the respective manufacturers. BOGVIK has no affiliation with the
OEM.
w
w
w
.bogvik.com
E:sales@
bogvik.com
M
:+86
15851989372
5. SHANGHAI BOGVIK WEAR MATERIAL CO., LTD.
WWW.BOGVIK.COM
All manufacturers brands, names, part numbers, model numbers and descriptions are used for reference and
identification purposes only, they are owned by the respective manufacturers. BOGVIK has no affiliation with the
OEM.
w
w
w
.bogvik.com
E:sales@
bogvik.com
M
:+86
15851989372
6. SHANGHAI BOGVIK WEAR MATERIAL CO., LTD.
WWW.BOGVIK.COM
All manufacturers brands, names, part numbers, model numbers and descriptions are used for reference and
identification purposes only, they are owned by the respective manufacturers. BOGVIK has no affiliation with the
OEM.
w
w
w
.bogvik.com
E:sales@
bogvik.com
M
:+86
15851989372
7. Mn22%Cr2% + TiC Insert HP500 Bowl liner and
Mantle
C160 Jaw Plate
Our latest TiC parts with 2-3 times longer service life have been shipped to our
Australian client who signed the second orders about TiC Cone liners from us.
SHANGHAI BOGVIK WEAR MATERIAL CO., LTD.
WWW.BOGVIK.COM
All manufacturers brands, names, part numbers, model numbers and descriptions are used for reference and
identification purposes only, they are owned by the respective manufacturers. BOGVIK has no affiliation with the
OEM.
w
w
w
.bogvik.com
E:sales@
bogvik.com
M
:+86
15851989372
8. SHANGHAI BOGVIK WEAR MATERIAL CO., LTD.
WWW.BOGVIK.COM
All manufacturers brands, names, part numbers, model numbers and descriptions are used for reference and
identification purposes only, they are owned by the respective manufacturers. BOGVIK has no affiliation with the
OEM.
w
w
w
.bogvik.com
E:sales@
bogvik.com
M
:+86
15851989372
9. HP300
BOGVIK Products Presentation ---
EXTEC
SHANGHAI BOGVIK WEAR MATERIAL CO., LTD.
WWW.BOGVIK.COM
All manufacturers brands, names, part numbers, model numbers and descriptions are used for reference and
identification purposes only, they are owned by the respective manufacturers. BOGVIK has no affiliation with the
OEM.
w
w
w
.bogvik.com
E:sales@
bogvik.com
M
:+86
15851989372
10. SHANGHAI BOGVIK WEAR MATERIAL CO., LTD.
WWW.BOGVIK.COM
All manufacturers brands, names, part numbers, model numbers and descriptions are used for reference and
identification purposes only, they are owned by the respective manufacturers. BOGVIK has no affiliation with the
OEM.
w
w
w
.bogvik.com
E:sales@
bogvik.com
M
:+86
15851989372
11. SHANGHAI BOGVIK WEAR MATERIAL CO., LTD.
WWW.BOGVIK.COM
All manufacturers brands, names, part numbers, model numbers and descriptions are used for reference and
identification purposes only, they are owned by the respective manufacturers. BOGVIK has no affiliation with the
OEM.
w
w
w
.bogvik.com
E:sales@
bogvik.com
M
:+86
15851989372
12. C10 / C12 Machinery Wear Parts Fixed/Swing jaw
plate
Part No. J4700000/J4710000
We can provide our clients with OEM Service about SANDVIK Parts.
BOGVIK Products Presentation ---
TEREX
SHANGHAI BOGVIK WEAR MATERIAL CO., LTD.
WWW.BOGVIK.COM
All manufacturers brands, names, part numbers, model numbers and descriptions are used for reference and
identification purposes only, they are owned by the respective manufacturers. BOGVIK has no affiliation with the
OEM.
w
w
w
.bogvik.com
E:sales@
bogvik.com
M
:+86
15851989372
13. CEDAREPIDS
SHANGHAI BOGVIK WEAR MATERIAL CO., LTD.
WWW.BOGVIK.COM
All manufacturers brands, names, part numbers, model numbers and descriptions are used for reference and
identification purposes only, they are owned by the respective manufacturers. BOGVIK has no affiliation with the
OEM.
w
w
w
.bogvik.com
E:sales@
bogvik.com
M
:+86
15851989372
14. SHANGHAI BOGVIK WEAR MATERIAL CO., LTD.
WWW.BOGVIK.COM
All manufacturers brands, names, part numbers, model numbers and descriptions are used for reference and
identification purposes only, they are owned by the respective manufacturers. BOGVIK has no affiliation with the
OEM.
w
w
w
.bogvik.com
E:sales@
bogvik.com
M
:+86
15851989372
15. SHANGHAI BOGVIK WEAR MATERIAL CO., LTD.
WWW.BOGVIK.COM
All manufacturers brands, names, part numbers, model numbers and descriptions are used for reference and
identification purposes only, they are owned by the respective manufacturers. BOGVIK has no affiliation with the
OEM.
w
w
w
.bogvik.com
E:sales@
bogvik.com
M
:+86
15851989372
16. SHANGHAI BOGVIK WEAR MATERIAL CO., LTD.
WWW.BOGVIK.COM
All manufacturers brands, names, part numbers, model numbers and descriptions are used for reference and
identification purposes only, they are owned by the respective manufacturers. BOGVIK has no affiliation with the
OEM.
w
w
w
.bogvik.com
E:sales@
bogvik.com
M
:+86
15851989372
17. SHANGHAI BOGVIK WEAR MATERIAL CO., LTD.
WWW.BOGVIK.COM
All manufacturers brands, names, part numbers, model numbers and descriptions are used for reference and
identification purposes only, they are owned by the respective manufacturers. BOGVIK has no affiliation with the
OEM.
w
w
w
.bogvik.com
E:sales@
bogvik.com
M
:+86
15851989372
18. SHANGHAI BOGVIK WEAR MATERIAL CO., LTD.
WWW.BOGVIK.COM
All manufacturers brands, names, part numbers, model numbers and descriptions are used for reference and
identification purposes only, they are owned by the respective manufacturers. BOGVIK has no affiliation with the
OEM.
w
w
w
.bogvik.com
E:sales@
bogvik.com
M
:+86
15851989372
19. SHANGHAI BOGVIK WEAR MATERIAL CO., LTD.
WWW.BOGVIK.COM
All manufacturers brands, names, part numbers, model numbers and descriptions are used for reference and
identification purposes only, they are owned by the respective manufacturers. BOGVIK has no affiliation with the
OEM.
w
w
w
.bogvik.com
E:sales@
bogvik.com
M
:+86
15851989372
20. SHANGHAI BOGVIK WEAR MATERIAL CO., LTD.
WWW.BOGVIK.COM
All manufacturers brands, names, part numbers, model numbers and descriptions are used for reference and
identification purposes only, they are owned by the respective manufacturers. BOGVIK has no affiliation with the
OEM.
w
w
w
.bogvik.com
E:sales@
bogvik.com
M
:+86
15851989372
21. TEREX CEDARAPIDS EL JAY RC54II C Chamber Bowl
Liner And Mantle
Precision Manganese Castings
Part Number: 02-540-528-8000 / 02-540-527-8000
One of our customers was very satisfied with our product quality and service after the
inspection, and then he has placed second orders for 4 containers about Terex cone
liners.
He said:" The first PO is to make good friends with you , the next orders means
I really trust you. "
SHANGHAI BOGVIK WEAR MATERIAL CO., LTD.
WWW.BOGVIK.COM
All manufacturers brands, names, part numbers, model numbers and descriptions are used for reference and
identification purposes only, they are owned by the respective manufacturers. BOGVIK has no affiliation with the
OEM.
w
w
w
.bogvik.com
E:sales@
bogvik.com
M
:+86
15851989372
22. BOGVIK Products Presentation ---
SYMONS
SHANGHAI BOGVIK WEAR MATERIAL CO., LTD.
WWW.BOGVIK.COM
All manufacturers brands, names, part numbers, model numbers and descriptions are used for reference and
identification purposes only, they are owned by the respective manufacturers. BOGVIK has no affiliation with the
OEM.
w
w
w
.bogvik.com
E:sales@
bogvik.com
M
:+86
15851989372
23. SHANGHAI BOGVIK WEAR MATERIAL CO., LTD.
WWW.BOGVIK.COM
All manufacturers brands, names, part numbers, model numbers and descriptions are used for reference and
identification purposes only, they are owned by the respective manufacturers. BOGVIK has no affiliation with the
OEM.
w
w
w
.bogvik.com
E:sales@
bogvik.com
M
:+86
15851989372
24. SHANGHAI BOGVIK WEAR MATERIAL CO., LTD.
WWW.BOGVIK.COM
All manufacturers brands, names, part numbers, model numbers and descriptions are used for reference and
identification purposes only, they are owned by the respective manufacturers. BOGVIK has no affiliation with the
OEM.
w
w
w
.bogvik.com
E:sales@
bogvik.com
M
:+86
15851989372
25. SHANGHAI BOGVIK WEAR MATERIAL CO., LTD.
WWW.BOGVIK.COM
All manufacturers brands, names, part numbers, model numbers and descriptions are used for reference and
identification purposes only, they are owned by the respective manufacturers. BOGVIK has no affiliation with the
OEM.
w
w
w
.bogvik.com
E:sales@
bogvik.com
M
:+86
15851989372
26. SHANGHAI BOGVIK WEAR MATERIAL CO., LTD.
WWW.BOGVIK.COM
All manufacturers brands, names, part numbers, model numbers and descriptions are used for reference and
identification purposes only, they are owned by the respective manufacturers. BOGVIK has no affiliation with the
OEM.
w
w
w
.bogvik.com
E:sales@
bogvik.com
M
:+86
15851989372
27. Part Number: 4830-5421 / 4830-4699
BOGVIK Products Presentation ---
TAIWAN CHYI
MEANG
SHANGHAI BOGVIK WEAR MATERIAL CO., LTD.
WWW.BOGVIK.COM
All manufacturers brands, names, part numbers, model numbers and descriptions are used for reference and
identification purposes only, they are owned by the respective manufacturers. BOGVIK has no affiliation with the
OEM.
w
w
w
.bogvik.com
E:sales@
bogvik.com
M
:+86
15851989372
28. SHANGHAI BOGVIK WEAR MATERIAL CO., LTD.
WWW.BOGVIK.COM
All manufacturers brands, names, part numbers, model numbers and descriptions are used for reference and
identification purposes only, they are owned by the respective manufacturers. BOGVIK has no affiliation with the
OEM.
w
w
w
.bogvik.com
E:sales@
bogvik.com
M
:+86
15851989372
29. Domestic Brand
BOGVIK Products Presentation ---
CRUSHER SPARE
PARTS
SHANGHAI BOGVIK WEAR MATERIAL CO., LTD.
WWW.BOGVIK.COM
All manufacturers brands, names, part numbers, model numbers and descriptions are used for reference and
identification purposes only, they are owned by the respective manufacturers. BOGVIK has no affiliation with the
OEM.
w
w
w
.bogvik.com
E:sales@
bogvik.com
M
:+86
15851989372
30. SHANGHAI BOGVIK WEAR MATERIAL CO., LTD.
WWW.BOGVIK.COM
All manufacturers brands, names, part numbers, model numbers and descriptions are used for reference and
identification purposes only, they are owned by the respective manufacturers. BOGVIK has no affiliation with the
OEM.
w
w
w
.bogvik.com
E:sales@
bogvik.com
M
:+86
15851989372
31. SHANGHAI BOGVIK WEAR MATERIAL CO., LTD.
WWW.BOGVIK.COM
All manufacturers brands, names, part numbers, model numbers and descriptions are used for reference and
identification purposes only, they are owned by the respective manufacturers. BOGVIK has no affiliation with the
OEM.
w
w
w
.bogvik.com
E:sales@
bogvik.com
M
:+86
15851989372
32. SHANGHAI BOGVIK WEAR MATERIAL CO., LTD.
WWW.BOGVIK.COM
All manufacturers brands, names, part numbers, model numbers and descriptions are used for reference and
identification purposes only, they are owned by the respective manufacturers. BOGVIK has no affiliation with the
OEM.
w
w
w
.bogvik.com
E:sales@
bogvik.com
M
:+86
15851989372
33. Spares: Jaw Wedge / Roller / Apron Feed Pan
Not only for the above parts, we also support the production of Impact /
Hammer/ Roller / Gyratory Crusher / Hammer Mill Parts / Other Spares.
Thank you for patiently reading my email. If you are also interested in establishing a
business relationship with BOGVIK or you have a recent purchase plan for crusher
wear parts & mining parts, please feel free to contact me.
Here expect for your inquiry and feedback with pleasure.
My Kindest Regards,
Fernando
SHANGHAI BOGVIK WEAR MATERIAL CO., LTD.
WWW.BOGVIK.COM
All manufacturers brands, names, part numbers, model numbers and descriptions are used for reference and
identification purposes only, they are owned by the respective manufacturers. BOGVIK has no affiliation with the
OEM.
w
w
w
.bogvik.com
E:sales@
bogvik.com
M
:+86
15851989372