Shanghai Bogvik Wear Material Co., Ltd (BOGVIK)is one of the most professional crusher parts manufacturer and distributor. We major supply crusher wear parts from 5kgs to 10000kgs in a broad variety of high managnese steel crusher wear parts and heat resistant steel alloys and iron, and crusher spare parts of famous crusher brand .
Our advantage: "Three Goods " --Good Quality. We adopt advance ALKALI PHENOLIC RESIN SAND production line ensure casting quality, Supply stable, good quality parts for any customers. Our foundry is located in Sichuan province, foundry area: 25000 square meter, 150 professional workers, productions capacity: 20000tons per year, whole production line adopts the international most advanced ALKALI PHENOLIC RESIN SAND molding process, completely solve the traditional production process which is difficult to overcome the blowhole, impacted sand and surface micro crack problems, greatly improve the product quality of wear parts. --Good Service ;
We could measure and design parts which customer enquiry. And customers could benefit from parts wear life, with lower processing costs. We have quality track system for sales parts, if parts happened to any quality problem, customers only tell us casting NO. And we could track parts quickly and solve problem at the first time. --Good Delivery ; Advanced production line greatly improves production efficiency, Shorts the delivery time, ensure the delivery time in time. Above advantages helps us to become increasingly competitive in the provision of crusher wear spare parts and services for domestic and international customers. Now introduce our foundry simply as follows, welcome to visit our foundry warmly and hope to build cooperation with you .
Thank you in advance for your attention to the certainty of good business.
Shanghai Bogvik Wear Material Co., Ltd (BOGVIK)is one of the most professional crusher parts manufacturer and distributor. We major supply crusher wear parts from 5kgs to 10000kgs in a broad variety of high managnese steel crusher wear parts and heat resistant steel alloys and iron, and crusher spare parts of famous crusher brand .
Our advantage: "Three Goods " --Good Quality. We adopt advance ALKALI PHENOLIC RESIN SAND production line ensure casting quality, Supply stable, good quality parts for any customers. Our foundry is located in Sichuan province, foundry area: 25000 square meter, 150 professional workers, productions capacity: 20000tons per year, whole production line adopts the international most advanced ALKALI PHENOLIC RESIN SAND molding process, completely solve the traditional production process which is difficult to overcome the blowhole, impacted sand and surface micro crack problems, greatly improve the product quality of wear parts. --Good Service ;
We could measure and design parts which customer enquiry. And customers could benefit from parts wear life, with lower processing costs. We have quality track system for sales parts, if parts happened to any quality problem, customers only tell us casting NO. And we could track parts quickly and solve problem at the first time. --Good Delivery ; Advanced production line greatly improves production efficiency, Shorts the delivery time, ensure the delivery time in time. Above advantages helps us to become increasingly competitive in the provision of crusher wear spare parts and services for domestic and international customers. Now introduce our foundry simply as follows, welcome to visit our foundry warmly and hope to build cooperation with you .
Thank you in advance for your attention to the certainty of good business.
This document appears to be a dealer stocking list for parts related to Massey Ferguson combines. It contains 149 items with part numbers, quantities, and brief descriptions. The list spans multiple pages and includes various mechanical and electrical parts like bulbs, fuses, bearings, sensors, and belts.
Gajanan Engineering Works is an ISO certified supplier, manufacturer and exporter of Industrial Radiators and Oil Coolers. This robust range of Automobile Radiators And Radiator Accessories is widely acknowledged in the market by our client.
This document provides an extensive list of profile options for trim, moulding, columns, and railing available from a manufacturer of premium color finished PVC building products. It includes toungue and groove profiles, crown moulds, casings, brickmoulds, columns, pergolas, rails, newels, base trims, caps, sill nose, and specialty and accent products. The manufacturer offers custom fabrication, radii and curved profiles, prefabricated window surround kits, and factory prefinished options in unlimited colors and finishes.
Telsun farming tractor wheel catalogue20170304Telsun Bruce
This document is a farming tractor wheel catalogue from Telsun Wheel Solutions that lists various wheel sizes and specifications. It provides the wheel size, Telsun part number, bolt hole diameter, pitch circle diameter (P.C.D.), and offset for over 30 different wheel options. It also lists contact information for Qingdao Telsun International Trade Co.,Ltd. to inquire about additional wheel sizes.
The document lists product codes, descriptions, list prices, and public prices for various safes and lock boxes from different vehicle manufacturers like Chevrolet, Dodge, Chrysler, and others. It includes over 200 entries with information about safes for specific vehicle models and years. The prices range from around $2,000 to over $26,000.
This document is a repair manual for a CNH Italia S.p.A. 521E Wheel Loader issued in January 2009. It contains sections covering general information like torque specifications and fluids, as well as sections for repair and maintenance of specific systems on the loader like the engine, fuel system, electrical, steering, power train, brakes, hydraulics, and mounted equipment. The document provides removal and installation instructions, specifications, troubleshooting procedures, and other repair information for repairing and maintaining the 521E Wheel Loader.
Jcb 170 170 hf robot service repair manual sn680001 onwardsufsiekdolskek
This document lists service tools used for maintenance and repair of JCB machines. It includes over 30 different tools such as bonded washers, adapters, threadlockers, sealants, activators, blanking caps, and pressure test adapters. The tools are organized numerically and referenced to their appropriate section in the service manual for hydraulic, electrical, and mechanical components.
Shanghai Bogvik Wear Material Co., Ltd (BOGVIK)is one of the most professional crusher parts manufacturer and distributor. We major supply crusher wear parts from 5kgs to 10000kgs in a broad variety of high managnese steel crusher wear parts and heat resistant steel alloys and iron, and crusher spare parts of famous crusher brand .
Our advantage: "Three Goods " --Good Quality. We adopt advance ALKALI PHENOLIC RESIN SAND production line ensure casting quality, Supply stable, good quality parts for any customers. Our foundry is located in Sichuan province, foundry area: 25000 square meter, 150 professional workers, productions capacity: 20000tons per year, whole production line adopts the international most advanced ALKALI PHENOLIC RESIN SAND molding process, completely solve the traditional production process which is difficult to overcome the blowhole, impacted sand and surface micro crack problems, greatly improve the product quality of wear parts. --Good Service ;
We could measure and design parts which customer enquiry. And customers could benefit from parts wear life, with lower processing costs. We have quality track system for sales parts, if parts happened to any quality problem, customers only tell us casting NO. And we could track parts quickly and solve problem at the first time. --Good Delivery ; Advanced production line greatly improves production efficiency, Shorts the delivery time, ensure the delivery time in time. Above advantages helps us to become increasingly competitive in the provision of crusher wear spare parts and services for domestic and international customers. Now introduce our foundry simply as follows, welcome to visit our foundry warmly and hope to build cooperation with you .
Thank you in advance for your attention to the certainty of good business.
This document appears to be a dealer stocking list for parts related to Massey Ferguson combines. It contains 149 items with part numbers, quantities, and brief descriptions. The list spans multiple pages and includes various mechanical and electrical parts like bulbs, fuses, bearings, sensors, and belts.
Gajanan Engineering Works is an ISO certified supplier, manufacturer and exporter of Industrial Radiators and Oil Coolers. This robust range of Automobile Radiators And Radiator Accessories is widely acknowledged in the market by our client.
This document provides an extensive list of profile options for trim, moulding, columns, and railing available from a manufacturer of premium color finished PVC building products. It includes toungue and groove profiles, crown moulds, casings, brickmoulds, columns, pergolas, rails, newels, base trims, caps, sill nose, and specialty and accent products. The manufacturer offers custom fabrication, radii and curved profiles, prefabricated window surround kits, and factory prefinished options in unlimited colors and finishes.
Telsun farming tractor wheel catalogue20170304Telsun Bruce
This document is a farming tractor wheel catalogue from Telsun Wheel Solutions that lists various wheel sizes and specifications. It provides the wheel size, Telsun part number, bolt hole diameter, pitch circle diameter (P.C.D.), and offset for over 30 different wheel options. It also lists contact information for Qingdao Telsun International Trade Co.,Ltd. to inquire about additional wheel sizes.
The document lists product codes, descriptions, list prices, and public prices for various safes and lock boxes from different vehicle manufacturers like Chevrolet, Dodge, Chrysler, and others. It includes over 200 entries with information about safes for specific vehicle models and years. The prices range from around $2,000 to over $26,000.
This document is a repair manual for a CNH Italia S.p.A. 521E Wheel Loader issued in January 2009. It contains sections covering general information like torque specifications and fluids, as well as sections for repair and maintenance of specific systems on the loader like the engine, fuel system, electrical, steering, power train, brakes, hydraulics, and mounted equipment. The document provides removal and installation instructions, specifications, troubleshooting procedures, and other repair information for repairing and maintaining the 521E Wheel Loader.
Jcb 170 170 hf robot service repair manual sn680001 onwardsufsiekdolskek
This document lists service tools used for maintenance and repair of JCB machines. It includes over 30 different tools such as bonded washers, adapters, threadlockers, sealants, activators, blanking caps, and pressure test adapters. The tools are organized numerically and referenced to their appropriate section in the service manual for hydraulic, electrical, and mechanical components.
Jcb 180 t 180thf robot service repair manual sn1162000 onwardsfjjskekkdkoepll
This document lists service tools used for maintenance and repair of JCB machines. It includes over 30 different tools such as bonded washers, adapters, threadlockers, sealants, activators, blanking caps, and pressure test adapters. The tools are organized numerically and referenced to the appropriate section of the service manual for their use.
Jcb 160 robot service repair manual sn680001 onwardsufsikkdjskemds
This document lists service tools used for maintaining JCB machines. It includes over 30 different tools such as bonded washers, adapters, threadlockers, sealants, activators, blanking caps, and pressure test adapters. The tools are organized numerically and referenced to sections in the manual covering body and framework, electrics, hydraulics, and other systems.
This document is a cross reference catalogue for gas springs used in automotive applications. It lists original equipment manufacturer (OEM) part numbers from various car brands and maps them to a standardized coding system. Over 100 car models are referenced, including brands like Fiat, Ford, Honda, Mercedes, and Nissan. For each OEM part number, a corresponding generic "CODE" is provided to allow for interchangeability across manufacturers.
This document is a catalog listing relays and accessories such as fuses for various car manufacturers and models. It includes an index of car producers, technical specifications for mini, standard, and maxi fuses, and cross reference tables matching original relay codes to the codes used in the catalog for Alfa Romeo, Audi, Fiat, Iveco, Lancia, Opel, Seat, Skoda, and Volkswagen models from the 1990s to 2010s. Application guides provide relay code, voltage, amperage, and wattage information for specific Alfa Romeo models.
Massey ferguson 1648 compact tractors parts catalogue manualhhjsekmdmm
This document is a table of contents for the engine, fuel, and exhaust systems of Massey Ferguson 1648, 1652, and 1655 compact tractors. It contains 91 pages listing component part numbers and references for the various engine systems of the different tractor models. The pages are organized by component and sub-component and include items like the cylinder block, heads, manifolds, pumps, nozzles and tanks.
This document provides a cross reference guide for heating control valves for various car models. It lists the original OEM part number, the equivalent Modine Savara part number, and the car manufacturer and specific car models that each part number applies to. The guide includes parts for models from manufacturers such as Alfa Romeo, Audi, Citroen, Fiat, Ford, Iveco, Lancia, Mazda, Mercedes-Benz, Opel, Renault, Saab, Seat, and Volkswagen.
Massey ferguson mf 3350 c fl crawler-type tractor parts catalogue manualufjjsjekkdemd
This document contains parts lists and diagrams for a Massey Ferguson MF 3350 C-FL crawler-type tractor engine. It includes lists of parts with numbers, quantities, and descriptions for the engine assembly, short engine, cylinder block, crankshaft, pistons and connecting rods, cylinder head, rocker shaft, timing gear and camshaft, and balancer unit. Diagrams are provided to show the layout and positioning of parts within the engine.
JCB 1CX BACKHOE LOADER Service Repair Manual SN(806000 Onwards)sjehfd ksejfm
This is the Highly Detailed factory service repair manual for theJCB 1CX BACKHOE LOADER, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.JCB 1CX BACKHOE LOADER Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
General Information
Care and Safety
Routine Maintenance
Attachments
Body and Framework
Electrics
Controls
Hydraulics
Transmission
Brakes
Engine
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveJCB 1CX BACKHOE LOADER Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
Massey ferguson mf5710 tractor (eco3 tier3; br) parts catalogue manualudjjjskekdmdm
This document provides a table of contents and parts lists for a Massey Ferguson MF 5710 tractor engine. The table of contents lists 18 sections that cover various engine systems and components. The parts lists include item numbers, part numbers, quantities, descriptions and comments for components of the engine block, cylinder head, intake manifold, turbocharger, and other engine assemblies.
Shanghai Bogvik Wear Material Co., Ltd is one of the most professional crusher parts manufacturer and distributor. We major supply crusher wear parts from 5kgs to 10000kgs in a broad variety of Managnese steel crusher wear parts and alloys steel and chromium iron, Ceramic Insert hammers or blow bars ,Titanium Carbide Insert Liners and crusher spare parts of famous crusher brand .
Wear and spare parts are at the heart of BOGVIK business and we are continually driven to find new and improved ways to optimize component life and equipment performance.
Depending on the application & our clients requirements we offer a range of manganese steel wear parts including Manganese13%, Manganese18% and Manganese22% all with or without chrome & / or molybdenum additions. All manganese liners supplied by BOGVIK are made to our own internal material specifications which are for more stringent than “standard” foundry material specifications.
BOGVIK has in excess of 10000 wear part patterns to fit the world’s most popular crushers. Our patterns cover jaw crushers, cone crushers, gyratory crushers, roll crushers, hammer crushers, horizontal shaft impactors and vertical shaft impactors. No matter what your requirements are, BOGVIK probably already has existing patterns for the wear parts.
We believe in collaboration and work hand-in-hand with our customers to develop solutions that leverages our practical experience, in-house engineering & metallurgical capabilities and manufacturing capacity to provide a complete solution that meets our customer needs.
Contact us today to see how we can help extend service life, improve throughput, optimize supply chain and reduce the total cost of ownership.
sales@bogvik.com
中文:
上海勃格维克耐磨材料有限公司是国内最专业的破碎机配件制造商和经销商之一。我们主要供应从 5 公斤到 10000 公斤的各种锰钢破碎机磨损件和合金钢和铬铁、陶瓷插入锤或板锤、碳化钛插入衬板和著名破碎机品牌的破碎机备件。
磨损和备件是勃格维克 业务的核心,我们不断寻求新的和改进的方法来优化部件寿命和设备性能。
根据应用和我们客户的要求,我们提供一系列锰钢耐磨部件,包括锰13%、锰18% 和锰22%,均添加或不添加铬和/或钼。勃格维克 提供的所有锰衬板均按照我们自己的内部材料规格制造,这些规格比“标准”铸造材料规格更严格。
勃格维克 拥有超过 10000 种磨损零件的模具,以适合世界上最受欢迎的破碎机。我们的模具涵盖颚式破碎机、圆锥破碎机、旋回破碎机、辊式破碎机、锤式破碎机、卧式冲击破碎机和立轴式冲击破碎机。无论您需求什么类型的易损件,勃格维克可能已经有此零件的模具。
我们相信与客户携手合作,开发解决方案,利用我们的实践经验、内部工程和冶金能力以及制造能力,提供满足客户需求的完整解决方案。
立即联系我们,了解我们如何帮助延长使用寿命、提高吞吐量、优化供应链并降低总拥有成本。
Suitable for SANDVIK Crusher Liners
Shanghai Bogvik Wear Material Co., Ltd is one of the most professional crusher parts manufacturer and distributor. We major supply crusher wear parts from 5kgs to 10000kgs in a broad variety of Managnese steel crusher wear parts and alloys steel and chromium iron, Ceramic Insert hammers or blow bars ,Titanium Carbide Insert Liners and crusher spare parts of famous crusher brand .
Wear and spare parts are at the heart of BOGVIK business and we are continually driven to find new and improved ways to optimize component life and equipment performance.
Depending on the application & our clients requirements we offer a range of manganese steel wear parts including Manganese13%, Manganese18% and Manganese22% all with or without chrome & / or molybdenum additions. All manganese liners supplied by BOGVIK are made to our own internal material specifications which are for more stringent than “standard” foundry material specifications.
BOGVIK has in excess of 10000 wear part patterns to fit the world’s most popular crushers. Our patterns cover jaw crushers, cone crushers, gyratory crushers, roll crushers, hammer crushers, horizontal shaft impactors and vertical shaft impactors. No matter what your requirements are, BOGVIK probably already has existing patterns for the wear parts.
We believe in collaboration and work hand-in-hand with our customers to develop solutions that leverages our practical experience, in-house engineering & metallurgical capabilities and manufacturing capacity to provide a complete solution that meets our customer needs.
Contact us today to see how we can help extend service life, improve throughput, optimize supply chain and reduce the total cost of ownership.
sales@bogvik.com
中文:
上海勃格维克耐磨材料有限公司是国内最专业的破碎机配件制造商和经销商之一。我们主要供应从 5 公斤到 10000 公斤的各种锰钢破碎机磨损件和合金钢和铬铁、陶瓷插入锤或板锤、碳化钛插入衬板和著名破碎机品牌的破碎机备件。
磨损和备件是勃格维克 业务的核心,我们不断寻求新的和改进的方法来优化部件寿命和设备性能。
根据应用和我们客户的要求,我们提供一系列锰钢耐磨部件,包括锰13%、锰18% 和锰22%,均添加或不添加铬和/或钼。勃格维克 提供的所有锰衬板均按照我们自己的内部材料规格制造,这些规格比“标准”铸造材料规格更严格。
勃格维克 拥有超过 10000 种磨损零件的模具,以适合世界上最受欢迎的破碎机。我们的模具涵盖颚式破碎机、圆锥破碎机、旋回破碎机、辊式破碎机、锤式破碎机、卧式冲击破碎机和立轴式冲击破碎机。无论您需求什么类型的易损件,勃格维克可能已经有此零件的模具。
我们相信与客户携手合作,开发解决方案,利用我们的实践经验、内部工程和冶金能力以及制造能力,提供满足客户需求的完整解决方案。
立即联系我们,了解我们如何帮助延长使用寿命、提高吞吐量、优化供应链并降低总拥有成本。
12 tic insert liners double the service lifeFernando Zhang
Why is TIC Liner more wearable?
A. The structure and properties of the matrix of the parts have changed. We have increased the content of Mn, Mo, and rare earth.
Therefore, the metallographic grain size of Hadfield steel is refined and the strength is enhanced.
B. The hardness of TIC Insert exceeds HRC60, and the hardness is about 3 times that of Hadfield steel!
The arrangement of Fine Chamber is almost the same as that of rough Chamber. According to the structure of the casting, Feed Size, make some small adjustments, there is no major change.
C. TIC Insert is a mesh-like structure, which is divided into points on the wear part, so as to achieve the purpose of improving the wear resistance of the part as a whole.
For TIC design, our engineers once again improved the design based on the wear curve of the parts you provided.
The size of the ore entering the Fine Chamber is very small, so we reduced the diameter and arrangement spacing of the TIC in order to obtain the best wear effect.
I share these ideas with you to let you fully understand the in-depth research we have done in this project.
Every new project is full of challenges and unknowns, but we are willing to challenge some interesting & valuable projects together with new customer.
How to solve the problem of excessive wear on both ends of Jaw liners? This is a classic case
One of our customers is in Shandong Province, China, and they have 2 crushers to crush iron ore.
One is 36X48 Jaw Crusher
One is 42X54 Jaw Crusher
We are told by customers that when they use OEM Liners, both ends of the Liners wear out very quickly! So productivity quickly dropped.
We filled the two ends of the teeth for our customers, and inlaid a lot of TIC Inserts at both ends.
The service life of the improved Liners is 3.68 times that of OEM Liners!
The customer was very satisfied with this and gave BOGVIK all their orders for Liners from dozens of sites in China
10 one of bogvik’s strongest product categories is plates made of manganese s...Fernando Zhang
One of Bogvik’s strongest product categories is plates made of manganese steel for jaw crushers.
This year, BOGVIK launched a new product — BOGVIK TIC plates. These are linings made of the standard alloys C, D and D1 but are reinforced with titanium carbide inserts. They show higher resistance to shock loads and cracking. This effect is achieved by special casting processes and heat treatment of the finished product, and the base alloy is selected in accordance with a rock type.
During the tests, the linings with inserts boasted an operating time that was 1.5 to 4 times more than that of classic manganese steel wear parts without inserts.
If you seek solutions to increase the intervals between plate replacement, reduce the number of maintenance stops, and lower your unit production costs — BOGVIK is what you need.
Contact our crushing&screening department to request individual solutions at: sales@bogvik.com
Ready to ship to the U.S.
Ready to ship to the U.S.
A reliable manufacturer of spare and wear parts and a supplier of engineering solutions for mining and construction equipment
sales@bogvik.com
Jaquess 36X48 Jaw
Our Customer would like to fill both ends to 18" F.I.E.
Just like in the photo, this design will be more durable。
If the crusher operates in very abrasive conditions at a very tight css then bottom of the jaws wear very quickly, fill jaw at both ends will help. But when you crush rock it expands by volume, corrugations allow this to occur, with this type of jaw enormous stress is transferred into the lower jaw frame and pitman/ bearings.
If rock is abrasive and soft no big deal, if its abrasive and tough, it can cause big issues.
We saw this problem with 50X60 Jaw at Huzhou quarry outside Shanghai.
So if possible good to know actual application and type of rock to decide best option.
Nip angle in crushing chamber is very important, smaller the better which is why thicker jaws with curve are requested by many people.
Kleemann Crusher Liners
MCO9 Crusher Liners
Crushing cone standard Cone S Part No. 2450546
Crushing shell standard fine Shell SF Part No. 2450551
MCO9 Crusher Liners
Crushing cone standard Cone S Part No. 2295672
Crushing shell standard medium Shell SM 2295649
C125 1P Quarry Type Jaw Plate
N11954343 JAW, FIXED QUARRY 1P 40mm Thick
N11954353 JAW MVBL QUARRY 1P Standard
It is suitable for quarry, and the use time is longer than OEM standard!
Contact BOGVIK for a quote: sales@bogvik.com
Shanghai Bogvik Wear Material Co., Ltd is one of the most professional crusher parts manufacturer and distributor. We major supply crusher wear parts from 5kgs to 10000kgs in a broad variety of Managnese steel crusher wear parts and alloys steel and chromium iron, Ceramic Insert hammers or blow bars ,Titanium Carbide Insert Liners and crusher spare parts of famous crusher brand .
Wear and spare parts are at the heart of BOGVIK business and we are continually driven to find new and improved ways to optimize component life and equipment performance.
Depending on the application & our clients requirements we offer a range of manganese steel wear parts including Manganese13%, Manganese18% and Manganese22% all with or without chrome & / or molybdenum additions. All manganese liners supplied by BOGVIK are made to our own internal material specifications which are for more stringent than “standard” foundry material specifications.
BOGVIK has in excess of 10000 wear part patterns to fit the world’s most popular crushers. Our patterns cover jaw crushers, cone crushers, gyratory crushers, roll crushers, hammer crushers, horizontal shaft impactors and vertical shaft impactors. No matter what your requirements are, BOGVIK probably already has existing patterns for the wear parts.
We believe in collaboration and work hand-in-hand with our customers to develop solutions that leverages our practical experience, in-house engineering & metallurgical capabilities and manufacturing capacity to provide a complete solution that meets our customer needs.
Contact us today to see how we can help extend service life, improve throughput, optimize supply chain and reduce the total cost of ownership.
sales@bogvik.com
上海勃格维克耐磨材料有限公司是国内最专业的破碎机配件制造商和经销商之一。我们主要供应从 5 公斤到 10000 公斤的各种锰钢破碎机磨损件和合金钢和铬铁、陶瓷插入锤或板锤、碳化钛插入衬板和著名破碎机品牌的破碎机备件。
磨损和备件是勃格维克 业务的核心,我们不断寻求新的和改进的方法来优化部件寿命和设备性能。
根据应用和我们客户的要求,我们提供一系列锰钢耐磨部件,包括锰13%、锰18% 和锰22%,均添加或不添加铬和/或钼。勃格维克 提供的所有锰衬板均按照我们自己的内部材料规格制造,这些规格比“标准”铸造材料规格更严格。
勃格维克 拥有超过 10000 种磨损零件的模具,以适合世界上最受欢迎的破碎机。我们的模具涵盖颚式破碎机、圆锥破碎机、旋回破碎机、辊式破碎机、锤式破碎机、卧式冲击破碎机和立轴式冲击破碎机。无论您需求什么类型的易损件,勃格维克可能已经有此零件的模具。
我们相信与客户携手合作,开发解决方案,利用我们的实践经验、内部工程和冶金能力以及制造能力,提供满足客户需求的完整解决方案。
立即联系我们,了解我们如何帮助延长使用寿命、提高吞吐量、优化供应链并降低总拥有成本。
MP1000 New Design
Mantle SPE STD F OS MX2 MM1564689 6284KG/PCS
Bowl Liners STD F MM1603957 5912KG/PCS
Original Equipment Replacement MP1000 Cone Crusher Parts
High quality cone crusher parts are a perfect fit
TIC Insert Jaw Crusher Wear Parts Manufacturer
BOGVIK has improved our customer Crusher Liners by TIC (titanium carbide) insert. BOGVIK TIC insert Crusher Liners are designed to improve efficiency and reduce costs by extending wear life and minimizing downtime. Compare with normal manganese crusher liners, our TIC insert wear parts span life can be 2-3 times. Based on our customer feedback, the more hard material to crush, the longer span life.
Benefits
2-3 times span life than normal manganese Crusher Liners
TIC insert Crusher Liners can decrease your plant downtime
Higher cost performance compare with normal manganese Crusher Liners
More easily to install
Original equipment replacement MP1000 cone crusher parts ensure proper fit, form and function to reduce maintenance issues and increase longevity. If your equipment fails, productivity of your entire plant is at risk. To avoid such losses, you must be sure critical replacement parts are readily available when you need them.
BOGVIK provides a complete offering, for both standard and engineered-to-order parts, ensuring you have the availability and support required. We provide flexible options to secure parts on a one-time basis, as a turn-key service, or anywhere in between.
Wear parts
Feed cone
Main frame liners
Mantle liners
Bowl liners
Protection cones
Arm guards
This document provides part numbers, descriptions, and weights for various components of mining and quarry equipment. It lists movable and fixed jaw plates for a quarry, as well as assemblies, belts, seals, pipes, screws, pins and other parts with specifications. The total number of parts listed is over 500.
01 bogvik customizes the sandvik ch550 for customers with different chamber l...Fernando Zhang
BOGVIK customizes the CH550 for customers with different Chamber liners
CH550 CONCAVE F 452.8600-001
CH550 MANTLE B 452.8602-001
CH550 CONCAVE EC TOP GRIP 452.7843-001
CH550 MANTLE A 452.7626-001
CH550 CONCAVE C 452.8500-001
CH550 FILLER RING C 452.7388-001
CH550 CONCAVE MC 452.8496-001
CH550 CONCAVE M 452.8601-001
CH550 FILLER RING M 452.7386-001
CH550 MANTLE FF BG00133846-01
Jcb 180 t 180thf robot service repair manual sn1162000 onwardsfjjskekkdkoepll
This document lists service tools used for maintenance and repair of JCB machines. It includes over 30 different tools such as bonded washers, adapters, threadlockers, sealants, activators, blanking caps, and pressure test adapters. The tools are organized numerically and referenced to the appropriate section of the service manual for their use.
Jcb 160 robot service repair manual sn680001 onwardsufsikkdjskemds
This document lists service tools used for maintaining JCB machines. It includes over 30 different tools such as bonded washers, adapters, threadlockers, sealants, activators, blanking caps, and pressure test adapters. The tools are organized numerically and referenced to sections in the manual covering body and framework, electrics, hydraulics, and other systems.
This document is a cross reference catalogue for gas springs used in automotive applications. It lists original equipment manufacturer (OEM) part numbers from various car brands and maps them to a standardized coding system. Over 100 car models are referenced, including brands like Fiat, Ford, Honda, Mercedes, and Nissan. For each OEM part number, a corresponding generic "CODE" is provided to allow for interchangeability across manufacturers.
This document is a catalog listing relays and accessories such as fuses for various car manufacturers and models. It includes an index of car producers, technical specifications for mini, standard, and maxi fuses, and cross reference tables matching original relay codes to the codes used in the catalog for Alfa Romeo, Audi, Fiat, Iveco, Lancia, Opel, Seat, Skoda, and Volkswagen models from the 1990s to 2010s. Application guides provide relay code, voltage, amperage, and wattage information for specific Alfa Romeo models.
Massey ferguson 1648 compact tractors parts catalogue manualhhjsekmdmm
This document is a table of contents for the engine, fuel, and exhaust systems of Massey Ferguson 1648, 1652, and 1655 compact tractors. It contains 91 pages listing component part numbers and references for the various engine systems of the different tractor models. The pages are organized by component and sub-component and include items like the cylinder block, heads, manifolds, pumps, nozzles and tanks.
This document provides a cross reference guide for heating control valves for various car models. It lists the original OEM part number, the equivalent Modine Savara part number, and the car manufacturer and specific car models that each part number applies to. The guide includes parts for models from manufacturers such as Alfa Romeo, Audi, Citroen, Fiat, Ford, Iveco, Lancia, Mazda, Mercedes-Benz, Opel, Renault, Saab, Seat, and Volkswagen.
Massey ferguson mf 3350 c fl crawler-type tractor parts catalogue manualufjjsjekkdemd
This document contains parts lists and diagrams for a Massey Ferguson MF 3350 C-FL crawler-type tractor engine. It includes lists of parts with numbers, quantities, and descriptions for the engine assembly, short engine, cylinder block, crankshaft, pistons and connecting rods, cylinder head, rocker shaft, timing gear and camshaft, and balancer unit. Diagrams are provided to show the layout and positioning of parts within the engine.
JCB 1CX BACKHOE LOADER Service Repair Manual SN(806000 Onwards)sjehfd ksejfm
This is the Highly Detailed factory service repair manual for theJCB 1CX BACKHOE LOADER, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.JCB 1CX BACKHOE LOADER Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
General Information
Care and Safety
Routine Maintenance
Attachments
Body and Framework
Electrics
Controls
Hydraulics
Transmission
Brakes
Engine
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveJCB 1CX BACKHOE LOADER Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
Massey ferguson mf5710 tractor (eco3 tier3; br) parts catalogue manualudjjjskekdmdm
This document provides a table of contents and parts lists for a Massey Ferguson MF 5710 tractor engine. The table of contents lists 18 sections that cover various engine systems and components. The parts lists include item numbers, part numbers, quantities, descriptions and comments for components of the engine block, cylinder head, intake manifold, turbocharger, and other engine assemblies.
Shanghai Bogvik Wear Material Co., Ltd is one of the most professional crusher parts manufacturer and distributor. We major supply crusher wear parts from 5kgs to 10000kgs in a broad variety of Managnese steel crusher wear parts and alloys steel and chromium iron, Ceramic Insert hammers or blow bars ,Titanium Carbide Insert Liners and crusher spare parts of famous crusher brand .
Wear and spare parts are at the heart of BOGVIK business and we are continually driven to find new and improved ways to optimize component life and equipment performance.
Depending on the application & our clients requirements we offer a range of manganese steel wear parts including Manganese13%, Manganese18% and Manganese22% all with or without chrome & / or molybdenum additions. All manganese liners supplied by BOGVIK are made to our own internal material specifications which are for more stringent than “standard” foundry material specifications.
BOGVIK has in excess of 10000 wear part patterns to fit the world’s most popular crushers. Our patterns cover jaw crushers, cone crushers, gyratory crushers, roll crushers, hammer crushers, horizontal shaft impactors and vertical shaft impactors. No matter what your requirements are, BOGVIK probably already has existing patterns for the wear parts.
We believe in collaboration and work hand-in-hand with our customers to develop solutions that leverages our practical experience, in-house engineering & metallurgical capabilities and manufacturing capacity to provide a complete solution that meets our customer needs.
Contact us today to see how we can help extend service life, improve throughput, optimize supply chain and reduce the total cost of ownership.
sales@bogvik.com
中文:
上海勃格维克耐磨材料有限公司是国内最专业的破碎机配件制造商和经销商之一。我们主要供应从 5 公斤到 10000 公斤的各种锰钢破碎机磨损件和合金钢和铬铁、陶瓷插入锤或板锤、碳化钛插入衬板和著名破碎机品牌的破碎机备件。
磨损和备件是勃格维克 业务的核心,我们不断寻求新的和改进的方法来优化部件寿命和设备性能。
根据应用和我们客户的要求,我们提供一系列锰钢耐磨部件,包括锰13%、锰18% 和锰22%,均添加或不添加铬和/或钼。勃格维克 提供的所有锰衬板均按照我们自己的内部材料规格制造,这些规格比“标准”铸造材料规格更严格。
勃格维克 拥有超过 10000 种磨损零件的模具,以适合世界上最受欢迎的破碎机。我们的模具涵盖颚式破碎机、圆锥破碎机、旋回破碎机、辊式破碎机、锤式破碎机、卧式冲击破碎机和立轴式冲击破碎机。无论您需求什么类型的易损件,勃格维克可能已经有此零件的模具。
我们相信与客户携手合作,开发解决方案,利用我们的实践经验、内部工程和冶金能力以及制造能力,提供满足客户需求的完整解决方案。
立即联系我们,了解我们如何帮助延长使用寿命、提高吞吐量、优化供应链并降低总拥有成本。
Suitable for SANDVIK Crusher Liners
Shanghai Bogvik Wear Material Co., Ltd is one of the most professional crusher parts manufacturer and distributor. We major supply crusher wear parts from 5kgs to 10000kgs in a broad variety of Managnese steel crusher wear parts and alloys steel and chromium iron, Ceramic Insert hammers or blow bars ,Titanium Carbide Insert Liners and crusher spare parts of famous crusher brand .
Wear and spare parts are at the heart of BOGVIK business and we are continually driven to find new and improved ways to optimize component life and equipment performance.
Depending on the application & our clients requirements we offer a range of manganese steel wear parts including Manganese13%, Manganese18% and Manganese22% all with or without chrome & / or molybdenum additions. All manganese liners supplied by BOGVIK are made to our own internal material specifications which are for more stringent than “standard” foundry material specifications.
BOGVIK has in excess of 10000 wear part patterns to fit the world’s most popular crushers. Our patterns cover jaw crushers, cone crushers, gyratory crushers, roll crushers, hammer crushers, horizontal shaft impactors and vertical shaft impactors. No matter what your requirements are, BOGVIK probably already has existing patterns for the wear parts.
We believe in collaboration and work hand-in-hand with our customers to develop solutions that leverages our practical experience, in-house engineering & metallurgical capabilities and manufacturing capacity to provide a complete solution that meets our customer needs.
Contact us today to see how we can help extend service life, improve throughput, optimize supply chain and reduce the total cost of ownership.
sales@bogvik.com
中文:
上海勃格维克耐磨材料有限公司是国内最专业的破碎机配件制造商和经销商之一。我们主要供应从 5 公斤到 10000 公斤的各种锰钢破碎机磨损件和合金钢和铬铁、陶瓷插入锤或板锤、碳化钛插入衬板和著名破碎机品牌的破碎机备件。
磨损和备件是勃格维克 业务的核心,我们不断寻求新的和改进的方法来优化部件寿命和设备性能。
根据应用和我们客户的要求,我们提供一系列锰钢耐磨部件,包括锰13%、锰18% 和锰22%,均添加或不添加铬和/或钼。勃格维克 提供的所有锰衬板均按照我们自己的内部材料规格制造,这些规格比“标准”铸造材料规格更严格。
勃格维克 拥有超过 10000 种磨损零件的模具,以适合世界上最受欢迎的破碎机。我们的模具涵盖颚式破碎机、圆锥破碎机、旋回破碎机、辊式破碎机、锤式破碎机、卧式冲击破碎机和立轴式冲击破碎机。无论您需求什么类型的易损件,勃格维克可能已经有此零件的模具。
我们相信与客户携手合作,开发解决方案,利用我们的实践经验、内部工程和冶金能力以及制造能力,提供满足客户需求的完整解决方案。
立即联系我们,了解我们如何帮助延长使用寿命、提高吞吐量、优化供应链并降低总拥有成本。
12 tic insert liners double the service lifeFernando Zhang
Why is TIC Liner more wearable?
A. The structure and properties of the matrix of the parts have changed. We have increased the content of Mn, Mo, and rare earth.
Therefore, the metallographic grain size of Hadfield steel is refined and the strength is enhanced.
B. The hardness of TIC Insert exceeds HRC60, and the hardness is about 3 times that of Hadfield steel!
The arrangement of Fine Chamber is almost the same as that of rough Chamber. According to the structure of the casting, Feed Size, make some small adjustments, there is no major change.
C. TIC Insert is a mesh-like structure, which is divided into points on the wear part, so as to achieve the purpose of improving the wear resistance of the part as a whole.
For TIC design, our engineers once again improved the design based on the wear curve of the parts you provided.
The size of the ore entering the Fine Chamber is very small, so we reduced the diameter and arrangement spacing of the TIC in order to obtain the best wear effect.
I share these ideas with you to let you fully understand the in-depth research we have done in this project.
Every new project is full of challenges and unknowns, but we are willing to challenge some interesting & valuable projects together with new customer.
How to solve the problem of excessive wear on both ends of Jaw liners? This is a classic case
One of our customers is in Shandong Province, China, and they have 2 crushers to crush iron ore.
One is 36X48 Jaw Crusher
One is 42X54 Jaw Crusher
We are told by customers that when they use OEM Liners, both ends of the Liners wear out very quickly! So productivity quickly dropped.
We filled the two ends of the teeth for our customers, and inlaid a lot of TIC Inserts at both ends.
The service life of the improved Liners is 3.68 times that of OEM Liners!
The customer was very satisfied with this and gave BOGVIK all their orders for Liners from dozens of sites in China
10 one of bogvik’s strongest product categories is plates made of manganese s...Fernando Zhang
One of Bogvik’s strongest product categories is plates made of manganese steel for jaw crushers.
This year, BOGVIK launched a new product — BOGVIK TIC plates. These are linings made of the standard alloys C, D and D1 but are reinforced with titanium carbide inserts. They show higher resistance to shock loads and cracking. This effect is achieved by special casting processes and heat treatment of the finished product, and the base alloy is selected in accordance with a rock type.
During the tests, the linings with inserts boasted an operating time that was 1.5 to 4 times more than that of classic manganese steel wear parts without inserts.
If you seek solutions to increase the intervals between plate replacement, reduce the number of maintenance stops, and lower your unit production costs — BOGVIK is what you need.
Contact our crushing&screening department to request individual solutions at: sales@bogvik.com
Ready to ship to the U.S.
Ready to ship to the U.S.
A reliable manufacturer of spare and wear parts and a supplier of engineering solutions for mining and construction equipment
sales@bogvik.com
Jaquess 36X48 Jaw
Our Customer would like to fill both ends to 18" F.I.E.
Just like in the photo, this design will be more durable。
If the crusher operates in very abrasive conditions at a very tight css then bottom of the jaws wear very quickly, fill jaw at both ends will help. But when you crush rock it expands by volume, corrugations allow this to occur, with this type of jaw enormous stress is transferred into the lower jaw frame and pitman/ bearings.
If rock is abrasive and soft no big deal, if its abrasive and tough, it can cause big issues.
We saw this problem with 50X60 Jaw at Huzhou quarry outside Shanghai.
So if possible good to know actual application and type of rock to decide best option.
Nip angle in crushing chamber is very important, smaller the better which is why thicker jaws with curve are requested by many people.
Kleemann Crusher Liners
MCO9 Crusher Liners
Crushing cone standard Cone S Part No. 2450546
Crushing shell standard fine Shell SF Part No. 2450551
MCO9 Crusher Liners
Crushing cone standard Cone S Part No. 2295672
Crushing shell standard medium Shell SM 2295649
C125 1P Quarry Type Jaw Plate
N11954343 JAW, FIXED QUARRY 1P 40mm Thick
N11954353 JAW MVBL QUARRY 1P Standard
It is suitable for quarry, and the use time is longer than OEM standard!
Contact BOGVIK for a quote: sales@bogvik.com
Shanghai Bogvik Wear Material Co., Ltd is one of the most professional crusher parts manufacturer and distributor. We major supply crusher wear parts from 5kgs to 10000kgs in a broad variety of Managnese steel crusher wear parts and alloys steel and chromium iron, Ceramic Insert hammers or blow bars ,Titanium Carbide Insert Liners and crusher spare parts of famous crusher brand .
Wear and spare parts are at the heart of BOGVIK business and we are continually driven to find new and improved ways to optimize component life and equipment performance.
Depending on the application & our clients requirements we offer a range of manganese steel wear parts including Manganese13%, Manganese18% and Manganese22% all with or without chrome & / or molybdenum additions. All manganese liners supplied by BOGVIK are made to our own internal material specifications which are for more stringent than “standard” foundry material specifications.
BOGVIK has in excess of 10000 wear part patterns to fit the world’s most popular crushers. Our patterns cover jaw crushers, cone crushers, gyratory crushers, roll crushers, hammer crushers, horizontal shaft impactors and vertical shaft impactors. No matter what your requirements are, BOGVIK probably already has existing patterns for the wear parts.
We believe in collaboration and work hand-in-hand with our customers to develop solutions that leverages our practical experience, in-house engineering & metallurgical capabilities and manufacturing capacity to provide a complete solution that meets our customer needs.
Contact us today to see how we can help extend service life, improve throughput, optimize supply chain and reduce the total cost of ownership.
sales@bogvik.com
上海勃格维克耐磨材料有限公司是国内最专业的破碎机配件制造商和经销商之一。我们主要供应从 5 公斤到 10000 公斤的各种锰钢破碎机磨损件和合金钢和铬铁、陶瓷插入锤或板锤、碳化钛插入衬板和著名破碎机品牌的破碎机备件。
磨损和备件是勃格维克 业务的核心,我们不断寻求新的和改进的方法来优化部件寿命和设备性能。
根据应用和我们客户的要求,我们提供一系列锰钢耐磨部件,包括锰13%、锰18% 和锰22%,均添加或不添加铬和/或钼。勃格维克 提供的所有锰衬板均按照我们自己的内部材料规格制造,这些规格比“标准”铸造材料规格更严格。
勃格维克 拥有超过 10000 种磨损零件的模具,以适合世界上最受欢迎的破碎机。我们的模具涵盖颚式破碎机、圆锥破碎机、旋回破碎机、辊式破碎机、锤式破碎机、卧式冲击破碎机和立轴式冲击破碎机。无论您需求什么类型的易损件,勃格维克可能已经有此零件的模具。
我们相信与客户携手合作,开发解决方案,利用我们的实践经验、内部工程和冶金能力以及制造能力,提供满足客户需求的完整解决方案。
立即联系我们,了解我们如何帮助延长使用寿命、提高吞吐量、优化供应链并降低总拥有成本。
MP1000 New Design
Mantle SPE STD F OS MX2 MM1564689 6284KG/PCS
Bowl Liners STD F MM1603957 5912KG/PCS
Original Equipment Replacement MP1000 Cone Crusher Parts
High quality cone crusher parts are a perfect fit
TIC Insert Jaw Crusher Wear Parts Manufacturer
BOGVIK has improved our customer Crusher Liners by TIC (titanium carbide) insert. BOGVIK TIC insert Crusher Liners are designed to improve efficiency and reduce costs by extending wear life and minimizing downtime. Compare with normal manganese crusher liners, our TIC insert wear parts span life can be 2-3 times. Based on our customer feedback, the more hard material to crush, the longer span life.
Benefits
2-3 times span life than normal manganese Crusher Liners
TIC insert Crusher Liners can decrease your plant downtime
Higher cost performance compare with normal manganese Crusher Liners
More easily to install
Original equipment replacement MP1000 cone crusher parts ensure proper fit, form and function to reduce maintenance issues and increase longevity. If your equipment fails, productivity of your entire plant is at risk. To avoid such losses, you must be sure critical replacement parts are readily available when you need them.
BOGVIK provides a complete offering, for both standard and engineered-to-order parts, ensuring you have the availability and support required. We provide flexible options to secure parts on a one-time basis, as a turn-key service, or anywhere in between.
Wear parts
Feed cone
Main frame liners
Mantle liners
Bowl liners
Protection cones
Arm guards
This document provides part numbers, descriptions, and weights for various components of mining and quarry equipment. It lists movable and fixed jaw plates for a quarry, as well as assemblies, belts, seals, pipes, screws, pins and other parts with specifications. The total number of parts listed is over 500.
01 bogvik customizes the sandvik ch550 for customers with different chamber l...Fernando Zhang
BOGVIK customizes the CH550 for customers with different Chamber liners
CH550 CONCAVE F 452.8600-001
CH550 MANTLE B 452.8602-001
CH550 CONCAVE EC TOP GRIP 452.7843-001
CH550 MANTLE A 452.7626-001
CH550 CONCAVE C 452.8500-001
CH550 FILLER RING C 452.7388-001
CH550 CONCAVE MC 452.8496-001
CH550 CONCAVE M 452.8601-001
CH550 FILLER RING M 452.7386-001
CH550 MANTLE FF BG00133846-01
Hi Morning!
BOGVIK has in excess of 10000 wear part patterns to fit the world’s most popular crushers. Our patterns cover jaw crushers, cone crushers, gyratory crushers, roll crushers, hammer crushers, horizontal shaft impactors and vertical shaft impactors. No matter what your requirements are, BOGVIK probably already has existing patterns for the wear parts.
Depending on the application & our clients requirements we offer a range of manganese steel wear parts including Mn13%, Mn18% and Mn22% all with or without chrome & / or molybdenum additions. All manganese liners supplied by BOGVIK are made to our own internal material specifications which are for more stringent than “standard” foundry material specifications.
Dear Valued BOGVIK Customers,
We have already come back to the office after enjoying a pleasant CNY holiday. All orders can be proceeded as scheduled.
Any new inquiry, Kindly feel free to contact me.
Looking forward to further cooperation in 2021.
Rgeards
Fernando
Bogvik is a major supplier of crusher wear parts since 1996, with over 10,000 patterns to fit most popular crushers including jaw, cone, gyratory, roll, hammer, horizontal shaft and vertical shaft impactors. They offer manganese steel wear parts in various compositions to meet application and client requirements. Bogvik prides itself on collaborating with customers to develop customized solutions that optimize component life and equipment performance by leveraging their engineering expertise and manufacturing capabilities.
Wear and spare parts are at the heart of BOGVIK business and we are continually driven to find new and improved ways to optimize component life and equipment performance.
We believe in collaboration and work hand-in-hand with our customers to develop solutions that leverages our practical experience, in-house engineering & metallurgical capabilities and manufacturing capacity to provide a complete solution that meets our customer needs.
Contact us today to see how we can help extend service life, improve throughput, optimize supply chain and reduce the total cost of ownership.
Wear and spare parts are at the heart of BOGVIK business and we are continually driven to find new and improved ways to optimize component life and equipment performance.
We believe in collaboration and work hand-in-hand with our customers to develop solutions that leverages our practical experience, in-house engineering & metallurgical capabilities and manufacturing capacity to provide a complete solution that meets our customer needs.
Contact us today to see how we can help extend service life, improve throughput, optimize supply chain and reduce the total cost of ownership.
Wear and spare parts are at the heart of BOGVIK business and we are continually driven to find new and improved ways to optimize component life and equipment performance.
We believe in collaboration and work hand-in-hand with our customers to develop solutions that leverages our practical experience, in-house engineering & metallurgical capabilities and manufacturing capacity to provide a complete solution that meets our customer needs.
Contact us today to see how we can help extend service life, improve throughput, optimize supply chain and reduce the total cost of ownership.
Predictably Improve Your B2B Tech Company's Performance by Leveraging DataKiwi Creative
Harness the power of AI-backed reports, benchmarking and data analysis to predict trends and detect anomalies in your marketing efforts.
Peter Caputa, CEO at Databox, reveals how you can discover the strategies and tools to increase your growth rate (and margins!).
From metrics to track to data habits to pick up, enhance your reporting for powerful insights to improve your B2B tech company's marketing.
- - -
This is the webinar recording from the June 2024 HubSpot User Group (HUG) for B2B Technology USA.
Watch the video recording at https://youtu.be/5vjwGfPN9lw
Sign up for future HUG events at https://events.hubspot.com/b2b-technology-usa/
Codeless Generative AI Pipelines
(GenAI with Milvus)
https://ml.dssconf.pl/user.html#!/lecture/DSSML24-041a/rate
Discover the potential of real-time streaming in the context of GenAI as we delve into the intricacies of Apache NiFi and its capabilities. Learn how this tool can significantly simplify the data engineering workflow for GenAI applications, allowing you to focus on the creative aspects rather than the technical complexities. I will guide you through practical examples and use cases, showing the impact of automation on prompt building. From data ingestion to transformation and delivery, witness how Apache NiFi streamlines the entire pipeline, ensuring a smooth and hassle-free experience.
Timothy Spann
https://www.youtube.com/@FLaNK-Stack
https://medium.com/@tspann
https://www.datainmotion.dev/
milvus, unstructured data, vector database, zilliz, cloud, vectors, python, deep learning, generative ai, genai, nifi, kafka, flink, streaming, iot, edge
Learn SQL from basic queries to Advance queriesmanishkhaire30
Dive into the world of data analysis with our comprehensive guide on mastering SQL! This presentation offers a practical approach to learning SQL, focusing on real-world applications and hands-on practice. Whether you're a beginner or looking to sharpen your skills, this guide provides the tools you need to extract, analyze, and interpret data effectively.
Key Highlights:
Foundations of SQL: Understand the basics of SQL, including data retrieval, filtering, and aggregation.
Advanced Queries: Learn to craft complex queries to uncover deep insights from your data.
Data Trends and Patterns: Discover how to identify and interpret trends and patterns in your datasets.
Practical Examples: Follow step-by-step examples to apply SQL techniques in real-world scenarios.
Actionable Insights: Gain the skills to derive actionable insights that drive informed decision-making.
Join us on this journey to enhance your data analysis capabilities and unlock the full potential of SQL. Perfect for data enthusiasts, analysts, and anyone eager to harness the power of data!
#DataAnalysis #SQL #LearningSQL #DataInsights #DataScience #Analytics
Analysis insight about a Flyball dog competition team's performanceroli9797
Insight of my analysis about a Flyball dog competition team's last year performance. Find more: https://github.com/rolandnagy-ds/flyball_race_analysis/tree/main
06-04-2024 - NYC Tech Week - Discussion on Vector Databases, Unstructured Data and AI
Round table discussion of vector databases, unstructured data, ai, big data, real-time, robots and Milvus.
A lively discussion with NJ Gen AI Meetup Lead, Prasad and Procure.FYI's Co-Found
Beyond the Basics of A/B Tests: Highly Innovative Experimentation Tactics You...Aggregage
This webinar will explore cutting-edge, less familiar but powerful experimentation methodologies which address well-known limitations of standard A/B Testing. Designed for data and product leaders, this session aims to inspire the embrace of innovative approaches and provide insights into the frontiers of experimentation!
The Ipsos - AI - Monitor 2024 Report.pdfSocial Samosa
According to Ipsos AI Monitor's 2024 report, 65% Indians said that products and services using AI have profoundly changed their daily life in the past 3-5 years.
Intelligence supported media monitoring in veterinary medicine
Bogvik pattern list 45 oth
1. BOGVIK Cone Crusher Wear Parts Pattern List
QM-1050143800 MANTLE, UPPER 98.0
QM-1050143810 MANTLE SH HD-MED & CSE 2687.0
QM-1050143829 MANTLE SHORT HEAD 2288.0
QM-1050143833 MANTLE SHORT HEAD, MED & COARSE, S/B 10 2695.0
QM-1050143842 MANTLE SHORT HEAD 2572.0
QM-1050143849 MANTLE STANDARD 3075.0
QM-1050143852 MANTLE SHORT HEAD, MEDIUM & FINE 4543.0
QM-1050143900 MANTLE STANDARD 4347.0
QM-1050143950 MANTLE SHORT HEAD 4987.0
QM-1050143953 MANTLE SHORT HEAD MEDIUM INTERMEDIATE 4700.0
QM-7055306754 MANTLE 374.0
QM-7055307010 MANTLE 558.0
QM-7055307256 MANTLE 1030.0
QM-7055308282 MANTLE SH F/M/C 1228.0
QM-7055308381 MANTLE STD F 1270.0
QM-7055308387 MANTLE STD F 1270.0
QM-7055308388 MANTLE SH F/M/C 1228.0
QM-7055308389 MANTLE SH EF 996.0
QM-7055308501 MANTLE STD F/M 1933.0
QM-7055308503 MANTLE STD F/M 1933.0
QM-7055308508 MANTLE STD F/M 1933.0
QM-7055308509 MANTLE SH F/M/C 1798.0
SHANGHAI BOGVIK WEAR MATERIAL CO., LTD.
WWW.BOGVIK.COM
All manufacturers brands, names, part numbers, model numbers and descriptions are used for reference and
identification purposes only, they are owned by the respective manufacturers. BOGVIK has no affiliation with the
OEM.
w
w
w
.bogvik.com
E:sales@
bogvik.com
M
:+86
15851989372
2. QM-7055308510 MANTLE SH EXTRA-FINE 1680.0
QM-814317169500 MANTLE EF/F 494.7
QM-814317177900 MANTLE M/C 414.8
QM-814318607800 MANTLE MF 1184.4
QM-814318836900 MANTLE C/EC 965.0
QM-814318848600 MANTLE EC 560.6
QM-814318940300 MANTLE F 597.6
QM-814320044100 MANTLE M/C 496.9
QM-814328537800 MANTLE F/MF/M/C 256.8
QM-814329548400 MANTLE GP500S, S1000 1950.0
QM-814390336100 MANTLE EC LS 884.0
QM-814390490400 MANTLE EF 271.2
QM-814390727700 MANTLE C/EC 578.0
QM-814390827200 MANTLE M/C OS 576.0
QM-10P1018902 MANTLE MODIFIED, SH HD MEDIUM INTERMEDI 4414.0
QM-MM0203178 MANTLE SPECIAL HP700 SH M-SPECIAL, 0861 2293.0
QM-MM0242240 MANTLE C/EC 625.4
QM-MM0309236 MANTLE F/MF/M/C OS 262.7
QM-MM0335582 MANTLE SPECIAL HP700 SH M-SPECIAL, 0861 2513.0
QM-MM0341717 MANTLE SH HD FINE 2769.0
QM-MM0342658 MANTLE STD F OS 1476.7
QM-N11920192 MANTLE MF/M 753.9
QM-N11920196 MANTLE C/EC 625.4
QM-N11922661 MANTLE SPECIAL MF 785.0
QM-N11922662 MANTLE SPECIAL MF 814.9
QM-N11933947 MANTLE F/M/EC 479.3
QM-N11941326 MANTLE EC 2132.0
SHANGHAI BOGVIK WEAR MATERIAL CO., LTD.
WWW.BOGVIK.COM
All manufacturers brands, names, part numbers, model numbers and descriptions are used for reference and
identification purposes only, they are owned by the respective manufacturers. BOGVIK has no affiliation with the
OEM.
w
w
w
.bogvik.com
E:sales@
bogvik.com
M
:+86
15851989372
3. QM-N11941327 MANTLE C 2315.9
QM-N11942003 MANTLE EF 466.4
QM-N11950666 MANTLE EF/F 494.7
QM-N11951712 MANTLE F/MF/M/C/EC 1218.1
QM-N55308511 MANTLE STD M/C/EC 1190.0
QM-N55308512 MANTLE STD M/C/EC 1190.0
QM-N55308514 MANTLE STD C/EC 1891.0
QM-N55308515 MANTLE STD C/EC 1891.0
QM-N55308516 MANTLE STD C/EC 1891.0
QM-N55308520 MANTLE SH COARSE 2233.0
QM-N55309256 MANTLE EF 1000.0
QM-N55309257 MANTLE F 1026.0
QM-N55309258 MANTLE M 967.0
QM-N55309259 MANTLE C/EC 939.0
QM-N55309500 MANTLE EC 1447.0
QM-N55309501 MANTLE M/C 1635.0
QM-N55309502 MANTLE EF/F 1697.0
QM-MM0528576 Mantle 795.0
QM-MM0528578 Concave 480.0
QM-285388 CONCAVE PROTECTION GP11F EF&F (G411&811 130.7
QM-285968 CONCAVE PROTECTION GP100EF, 285968 55.0
QM-934265 CONCAVE PROTECTION GP200 F 52.5
QM-814317169600 CONCAVE EF 389.1
QM-814317171900 CONCAVE F 417.5
QM-814317177700 CONCAVE M 809.9
QM-814317178300 CONCAVE MF 420.8
QM-814317183600 CONCAVE F 348.4
SHANGHAI BOGVIK WEAR MATERIAL CO., LTD.
WWW.BOGVIK.COM
All manufacturers brands, names, part numbers, model numbers and descriptions are used for reference and
identification purposes only, they are owned by the respective manufacturers. BOGVIK has no affiliation with the
OEM.
w
w
w
.bogvik.com
E:sales@
bogvik.com
M
:+86
15851989372
4. QM-814318675800 CONCAVE C 793.4
QM-814318848700 CONCAVE EC 793.0
QM-814318862000 CONCAVE GP300S C 0861-512 951.1
QM-814318862100 CONCAVE UPPER C 472.4
QM-814318865500 CONCAVE M 392.2
QM-814318921300 CONCAVE MF 1587.3
QM-814328537700 CONCAVE C 356.4
QM-814328546000 CONCAVE C 752.5
QM-814328546200 CONCAVE LOWER GP100S M 0861-512 394.9
QM-814328546300 CONCAVE UPPER M 339.9
QM-814328570600 CONCAVE LOWER GP100S C 0861-512 333.6
QM-814329234600 CONCAVE UPR C 208.1
QM-814329276100 CONCAVE GP300S EC 0861-512 946.0
QM-814329276200 CONCAVE UPPER EC 415.7
QM-814329529300 CONCAVE EF 266.8
QM-814390336200 CONCAVE SPCL EXTEN GP300S EC-LS (G3812- 839.0
QM-814390455800 CONCAVE F 703.9
QM-814390523400 CONCAVE EC LS 780.7
QM-814390727800 CONCAVE GP200SEC 0861-512 436.3
QM-814390727900 CONCAVE UPPER EC 239.5
QM-814390882100 CONCAVE GP500S C 0861-512 1790.0
QM-814390882200 CONCAVE, UPPER GP500S C 0861-512 1425.0
QM-814391704400 CONCAVE GP200S C 0861-512 465.4
QM-814391704500 CONCAVE UPPER C 307.6
QM-MM0242241 CONCAVE EC 816.5
QM-N11905094 CONCAVE MF/C 1097.8
QM-N11920194 CONCAVE MF/C LS 979.2
SHANGHAI BOGVIK WEAR MATERIAL CO., LTD.
WWW.BOGVIK.COM
All manufacturers brands, names, part numbers, model numbers and descriptions are used for reference and
identification purposes only, they are owned by the respective manufacturers. BOGVIK has no affiliation with the
OEM.
w
w
w
.bogvik.com
E:sales@
bogvik.com
M
:+86
15851989372
5. QM-N11920195 CONCAVE M 921.6
QM-N11920197 CONCAVE EC 816.5
QM-N11922731 CONCAVE PROTECTION G1015-SPECIAL 63.0
QM-N11933948 CONCAVE SPECIAL F 481.8
QM-N11933949 CONCAVE M 653.5
QM-N11941328 CONCAVE GP500S C (&EC) 0861-512 1916.3
QM-N11942004 CONCAVE EF 428.2
QM-N11944214 CONCAVE F 569.0
QM-N11944215 CONCAVE EC 619.4
QM-N11947962 CONCAVE UPPER C 1317.3
QM-N11947963 CONCAVE UPPER EC 1079.0
QM-N11950658 CONCAVE C 356.0
QM-N11951220 CONCAVE MC 600.8
QM-N11951715 CONCAVE M 1687.6
QM-N11951717 CONCAVE EC 1559.7
QM-1048300031 BOWL LINER SH C 1177.0
QM-1048300032 BOWL LINER SH M 1151.0
QM-1048300035 BOWL LINER SH M 1151.0
QM-1048300039 BOWL LINER SH C 1177.0
QM-1048300043 BOWL LINER SH EF 1014.0
QM-1048314236 BOWL LINER STD C 2295.0
QM-1048314240 BOWL LINER STD EC 1919.0
QM-1048314241 BOWL LINER SH C 1767.0
QM-1048314242 BOWL LINER SH M 1710.0
QM-1048314243 BOWL LINER STD C 2295.0
QM-1048314244 BOWL LINER STD EC 1919.0
QM-1048314310 BOWL LINER SHORT HEAD MEDIUM 2208.0
SHANGHAI BOGVIK WEAR MATERIAL CO., LTD.
WWW.BOGVIK.COM
All manufacturers brands, names, part numbers, model numbers and descriptions are used for reference and
identification purposes only, they are owned by the respective manufacturers. BOGVIK has no affiliation with the
OEM.
w
w
w
.bogvik.com
E:sales@
bogvik.com
M
:+86
15851989372
6. QM-1048314344 BOWL LINER STD X-COARSE 3120.0
QM-1048314349 BOWL LINER SHORT HEAD MEDIUM 2190.0
QM-1048314364 BOWL LINER SHORT HEAD, MEDIUM 4121.0
QM-1048315201 BOWL LINER STANDARD MEDIUM 4132.0
QM-1048315250 BOWL LINER SHORT HEAD - FINE 3908.0
QM-1048315255 BOWL LINER SHORT HEAD - MEDIUM 4451.0
QM-7055206753 BOWL LINER 439.0
QM-7055207010 BOWL LINER 735.0
QM-7055207263 BOWL LINER 1160.0
QM-7055208382 BOWL LINER STD F 1413.0
QM-7055208392 BOWL LINER STD F 1413.0
QM-7055208395 BOWL LINER SH FINE 1159.0
QM-7055208502 BOWL LINER STD F 2074.0
QM-7055208512 BOWL LINER STD M 2090.0
QM-7055208514 BOWL LINER STD C 2295.0
QM-7055208515 BOWL LINER STD M 2090.0
QM-7055208516 BOWL LINER STD F 2074.0
QM-7055208519 BOWL LINER SH F 1850.0
QM-7055208520 BOWL LINER SH EXTRA-FINE 1580.0
QM-10P1018901 BOWL LINER MODIFIED, SH HD MEDIUM 4414.0
QM-MM0203180 BOWL LINER SH HD MEDIUM SPECIAL 2736.0
QM-MM0314033 BOWL LINER SHORT HEAD COARSE 3561.0
QM-MM0341718 BOWL LINER SH HD FINE 2145.0
QM-MM0342657 BOWL LINER STD F OS 1638.0
QM-N55208398 BOWL LINER STD C 1445.0
QM-N55208399 BOWL LINER STD COARSE 1445.0
QM-N55208522 BOWL LINER STD C 1389.0
SHANGHAI BOGVIK WEAR MATERIAL CO., LTD.
WWW.BOGVIK.COM
All manufacturers brands, names, part numbers, model numbers and descriptions are used for reference and
identification purposes only, they are owned by the respective manufacturers. BOGVIK has no affiliation with the
OEM.
w
w
w
.bogvik.com
E:sales@
bogvik.com
M
:+86
15851989372
7. QM-N55208523 BOWL LINER STD EC 1389.0
QM-N55208526 BOWL LINER STD M 1387.0
QM-N55208528 BOWL LINER SH MEDIUM 1608.0
QM-N55208532 BOWL LINER SH COARSE 2045.0
QM-N55209252 BOWL LINER F 1161.0
QM-N55209253 BOWL LINER M 1060.0
QM-N55209254 BOWL LINER EC 949.0
QM-N55209255 BOWL LINER EF 1052.0
QM-N55209501 BOWL LINER EC 1624.0
QM-N55209503 BOWL LINER M 2013.0
QM-N55209504 BOWL LINER F 2249.0
QM-447025 TORCH RING G2215&G1815 6.9
QM-447063 TORCH RING G2211 3.4
QM-495349 TORCH RING GP500EF-MF & GP500S 6.4
QM-1063915505 TORCH RING 8.4
QM-1063915607 TORCH RING 5.5
QM-1063915668 TORCH RING 30.0
QM-1063915673 TORCH RING 24.5
QM-1063915676 TORCH RING 6.2
QM-1063915719 TORCH RING 20.080"OD 4.2
QM-1063915737 TORCH RING 20.0
QM-7012080001 TORCH RING 6.6
QM-N12080203 TORCH RING 5.3
QM-N12080205 TORCH RING 11.0
QM-N12080207 TORCH RING 4.9
QM-N12080210 TORCH RING 5.6
QM-
SHANGHAI BOGVIK WEAR MATERIAL CO., LTD.
WWW.BOGVIK.COM
All manufacturers brands, names, part numbers, model numbers and descriptions are used for reference and
identification purposes only, they are owned by the respective manufacturers. BOGVIK has no affiliation with the
OEM.
w
w
w
.bogvik.com
E:sales@
bogvik.com
M
:+86
15851989372
8. QM-442.6197-01 Mantle 232
QM-442.6197-02 Mantle 232
QM-442.9569-01 Concave 315
QM-442.9569-02 Concave 315
QM-442.9586-01 Concave 305
QM-442.9586-02 Concave 305
QM-442.9585-01 Concave 320
QM-442.9585-02 Concave 320
QM-442.9587-01 Mantle 272
QM-442.9587-02 Mantle 272
QM-442.7225-01 Mantle 687.0
QM-442.7225-02 Mantle 687.0
QM-442.7230-01 Mantle 607.0
QM-442.7230-02 Mantle 607.0
QM-442.9073-01 Mantle 730.0
QM-442.9073-02 Mantle 730.0
QM-442.8039-01 Mantle 765.0
QM-442.8039-02 Mantle 765.0
QM-442.8417-01 Concave 838.0
QM-442.8417-02 Concave 838.0
QM-442.8419-01 Concave 859.0
QM-442.8419-02 Concave 859.0
QM-442.8418-01 Concave 858.0
QM-442.8418-02 Concave 858.0
QM-442.8420-01 Concave 826.0
QM-442.8420-02 Concave 826.0
QM-442.8421-01 Concave 837.0
SHANGHAI BOGVIK WEAR MATERIAL CO., LTD.
WWW.BOGVIK.COM
All manufacturers brands, names, part numbers, model numbers and descriptions are used for reference and
identification purposes only, they are owned by the respective manufacturers. BOGVIK has no affiliation with the
OEM.
w
w
w
.bogvik.com
E:sales@
bogvik.com
M
:+86
15851989372
9. QM-442.8421-02 Concave 837.0
QM-442.8416-01 Concave 850.0
QM-442.8416-02 Concave 850.0
QM-452.3027-01 Concave 811.0
QM-452.3027-02 Concave 811.0
QM-442.8819 MantleA 1192.0
QM-442.8820 MantleB 1100.0
QM-442.8821 MantleD 1170.0
QM-442.9760 MantleHC 1200.0
QM-442.7118 Mantle 1050.0
QM-442.9355 Mantle 1350.0
QM-442.8813 Concave 1280.0
QM-442.8814 Concave 1220.0
QM-442.8815 Concave 1350.0
QM-442.8816 Concave 1292.0
QM-442.8817 Concave 1250.0
QM-442.8818 Concave 1190.0
QM-442.9230 Concave 1400.0
QM-442.9356 Concave 1170.0
QM-442.5679 Concave 1198.0
QM-452.2255 Concave 1870.0
QM-452.0837 Mantle 1970.0
QM-452.0838 Concave 2025.0
QM-452.0842 Concave 1760.0
QM-452.0840 Concave 2100.0
QM-452.0845 Mantle 1970.0
QM-452.0872 Mantle 1600.0
SHANGHAI BOGVIK WEAR MATERIAL CO., LTD.
WWW.BOGVIK.COM
All manufacturers brands, names, part numbers, model numbers and descriptions are used for reference and
identification purposes only, they are owned by the respective manufacturers. BOGVIK has no affiliation with the
OEM.
w
w
w
.bogvik.com
E:sales@
bogvik.com
M
:+86
15851989372
10. QM-442.9337 Concave 3700.0
QM-442.9339 Mantle 3100.0
QM-442.9312 Concave 3980.0
QM-442.9314 Mantle 3700.0
QM-442.9340 Mantle 3680.0
QM-442.9398 Concave 4200.0
QM-442.9471_ Concave 3800.0
QM-452.0264 Mantle 3700.0
QM-452.0263 Concave 3200.0
QM-452.1067 Concave 3200.0
QM-452.4051 Concave 3800.0
QM-442.8470 Concave 755.0
QM-442.8114 Concave 948.0
QM-442.9584 Concave 347.0
QM-452.0273 Concave 893.0
QM-442.8070 Concave 1147.0
QM-442.6789 Concave 407.0
QM-442.8464 Concave 265.0
QM-442.8098 Concave 878.0
QM-442.8089 Concave 1271.0
QM-442.8478 Concave 463.0
QM-442.8471 Concave 665.0
QM-442.8477 Concave 534.0
QM-442.8982 Mantle 2200.0
QM-442.8983 Mantle 1950.0
QM-442.9071 Concave 2100.0
QM-442.9072 Concave 1800.0
SHANGHAI BOGVIK WEAR MATERIAL CO., LTD.
WWW.BOGVIK.COM
All manufacturers brands, names, part numbers, model numbers and descriptions are used for reference and
identification purposes only, they are owned by the respective manufacturers. BOGVIK has no affiliation with the
OEM.
w
w
w
.bogvik.com
E:sales@
bogvik.com
M
:+86
15851989372
11. QM-442.8981 Concave 1400.0
QM-442.8979 Concave 1800.0
QM-
QM-4829 1921 Std. Fine for Coarse & X-Coarse Bowl 104.3
QM-6666 5613 Std. Fine for Coarse & X-Coarse Bowl 104.3
QM-4829 3541 Std. Coarse for Coarse & X-Coarse Bowl 90.7
QM-6666 5614 Std. Coarse for Coarse & X-Coarse Bowl 90.7
QM-4829 3001 Std. X-Coarse for Coarse & X-Coarse Bowl 102.1
QM-6666 5615 Std. X-Coarse for Coarse & X-Coarse Bowl 102.1
QM-4829 4081 SHD. Fine for Coarse Bowl 147.4
QM-6666 5616 SHD. Fine for Coarse Bowl 147.4
QM-4829 4351 SHD. Coarse for Coarse Bowl 131.5
QM-6666 5617 SHD. Coarse for Coarse Bowl 131.5
QM-4829 6646 Std. Fine for Fine & Coarse Bowl 331.1
QM-6666 5618 Std. Fine for Fine & Coarse Bowl 331.1
QM-4829 6544 Std. Fine for X-Coarse Bowl 454.0
QM-6666 5619 Std. Fine for X-Coarse Bowl 454.0
QM-4829 5026 Std. Coarse for Coarse Bowl 310.7
QM-6666 5621 Std. Coarse for Coarse Bowl 310.7
QM-4829 6575 Std. Coarse for X-Coarse Bowl 391.0
QM-6666 5622 Std. Coarse for X-Coarse Bowl 391.0
QM-4829 6530 Std. Coarse for X-Coarse Bowl 474.9
QM-6666 5624 Std. Coarse for X-Coarse Bowl 474.9
QM-4829 5431 SHD. Fine for Fine Bowl 272.2
QM-4829 5701 SHD. Fine for Coarse Bowl 266.7
QM-6666 5626 SHD. Fine for Coarse Bowl 266.7
QM-4829 5296 SHD. Fine for Coarse Bowl 267.6
SHANGHAI BOGVIK WEAR MATERIAL CO., LTD.
WWW.BOGVIK.COM
All manufacturers brands, names, part numbers, model numbers and descriptions are used for reference and
identification purposes only, they are owned by the respective manufacturers. BOGVIK has no affiliation with the
OEM.
w
w
w
.bogvik.com
E:sales@
bogvik.com
M
:+86
15851989372
12. QM-6666 5627 SHD. Fine for Coarse Bowl 267.6
QM-4829 6951 SHD. Fine for Coarse Bowl 376.5
QM-6666 5629 SHD. Fine for Coarse Bowl 376.5
QM-4829 5161 SHD. Medium for Coarse Bowl 281.2
QM-6666 5630 SHD. Medium for Coarse Bowl 281.2
QM-4829 5163 SHD. Medium for Fine Bowl 294.8
QM-6666 5631 SHD. Medium for Fine Bowl 294.8
QM-4829 7591 SHD. Coarse for Coarse Bowl 347.0
QM-6666 5632 SHD. Coarse for Coarse Bowl 347.0
QM-4829 8131 SHD. Coarse for Coarse Bowl 347.0
QM-6666 5633 SHD. Coarse for Coarse Bowl 347.0
QM-4830 1101 Std. Fine for Fine & Coarse Bowl 875.4
QM-6666 5635 Std. Fine for Fine & Coarse Bowl 875.4
QM-4830 3261 Std. Fine for Fine & Coarse Bowl 816.5
QM-6666 5636 Std. Fine for Fine & Coarse Bowl 816.5
QM-4830 0350 Std. Medium for Coarse Bowl 757.5
QM-6666 5637 Std. Medium for Coarse Bowl 757.5
QM-4830 0291 Std. Coarse for Coarse Bowl 722.1
QM-6666 5611 Std. Coarse for Coarse Bowl 722.1
QM-4830 3533 Std. Coarse for Coarse Bowl 793.8
QM-6666 5638 Std. Coarse for Coarse Bowl 793.8
QM- 4830 1151 Std. X-Coarse for X-Coarse Bowl 825.5
QM-6666 5639 Std. X-Coarse for X-Coarse Bowl 825.5
QM-4829 8603 BOWL LINER 648.6
QM-6666 5640 BOWL LINER 648.6
QM-4829 8545 BOWL LINER 635.0
QM-6666 5641 BOWL LINER 635.0
SHANGHAI BOGVIK WEAR MATERIAL CO., LTD.
WWW.BOGVIK.COM
All manufacturers brands, names, part numbers, model numbers and descriptions are used for reference and
identification purposes only, they are owned by the respective manufacturers. BOGVIK has no affiliation with the
OEM.
w
w
w
.bogvik.com
E:sales@
bogvik.com
M
:+86
15851989372
13. QM-4829 8671 BOWL LINER 668.6
QM- 6666 5642 BOWL LINER 668.6
QM-4829 8540 BOWL LINER 560.2
QM-6666 5643 BOWL LINER 560.2
QM-4830 0023 BOWL LINER 630.5
QM-6666 5644 BOWL LINER 630.5
QM-4830 0158 BOWL LINER 739.4
QM-6666 5666 BOWL LINER 739.4
QM-4830 4612 BOWL LINER 870.9
QM- 6666 5646 BOWL LINER 870.9
QM-4830 4341 BOWL LINER 816.5
QM- 6666 5647 BOWL LINER 816.5
QM- 4830 2800 BOWL LINER 1038.7
QM-6666 5648 BOWL LINER 1038.7
QM- 4830 4071 BOWL LINER 839.1
QM-4830 4699 BOWL LINER 1156.7
QM- 6666 5650 BOWL LINER 1156.7
QM-4830 4344 BOWL LINER 850.5
QM-6666 5651 BOWL LINER 850.5
QM-4830 2957 BOWL LINER 907.2
QM- 6666 5652 BOWL LINER 907.2
QM-4830 2958 BOWL LINER 793.8
QM-6666 5653 BOWL LINER 793.8
QM-4830 2957 BOWL LINER 907.2
QM-6666 5652 BOWL LINER 907.2
QM-4830 4881 BOWL LINER 861.8
QM-6666 5655 BOWL LINER 861.8
SHANGHAI BOGVIK WEAR MATERIAL CO., LTD.
WWW.BOGVIK.COM
All manufacturers brands, names, part numbers, model numbers and descriptions are used for reference and
identification purposes only, they are owned by the respective manufacturers. BOGVIK has no affiliation with the
OEM.
w
w
w
.bogvik.com
E:sales@
bogvik.com
M
:+86
15851989372
14. QM- 4830 1826 BOWL LINER 861.8
QM-6666 5656 BOWL LINER 861.8
QM- 4830 2958 BOWL LINER 793.8
QM-6666 5653 BOWL LINER 793.8
QM-4829 8603 BOWL LINER 605.5
QM-6666 5640 BOWL LINER 605.5
QM-4829 9211 BOWL LINER 635.0
QM- 6666 5669 BOWL LINER 635.0
QM- 4829 9751 BOWL LINER 771.1
QM-6666 5660 BOWL LINER 771.1
QM- 4829 8941 BOWL LINER 626.0
QM-6666 5661 BOWL LINER 626.0
QM-4830 0023 BOWL LINER 580.6
QM- 6666 5644 BOWL LINER 580.6
QM-4830 0024 BOWL LINER 587.4
QM-6666 5663 BOWL LINER 587.4
QM-4830 2451 BOWL LINER 966.2
QM-6666 5664 BOWL LINER 966.2
QM- 4829 8671 BOWL LINER 628.2
QM-6666 5642 BOWL LINER 628.2
QM-4830 0158 BOWL LINER 725.7
QM-6666 5666 BOWL LINER 725.7
QM- 4830 1288 BOWL LINER 750.7
QM-6666 5612 BOWL LINER 750.7
QM- 4829 9481 BOWL LINER 771.1
QM-6666 5668 BOWL LINER 771.1
QM-4830 0200 BOWL LINER 857.3
SHANGHAI BOGVIK WEAR MATERIAL CO., LTD.
WWW.BOGVIK.COM
All manufacturers brands, names, part numbers, model numbers and descriptions are used for reference and
identification purposes only, they are owned by the respective manufacturers. BOGVIK has no affiliation with the
OEM.
w
w
w
.bogvik.com
E:sales@
bogvik.com
M
:+86
15851989372
15. QM-6666 5667 BOWL LINER 857.3
QM-4830 1371 BOWL LINER 650.9
QM-6666 5669 BOWL LINER 650.9
QM-4830 6638 BOWL LINER 2177.2
QM-6666 5671 BOWL LINER 2177.2
QM-4830 6501 BOWL LINER 1873.3
QM- 6666 5673 BOWL LINER 1873.3
QM-4830 6771 BOWL LINER 1995.8
QM-6666 5675 BOWL LINER 1995.8
QM- 4830 6772 BOWL LINER 1995.8
QM-6666 5676 BOWL LINER 1995.8
QM-4830 6871 BOWL LINER 1859.7
QM- 6666 5677 BOWL LINER 1859.7
QM-4830 5556 BOWL LINER 1245.1
QM-6666 5679 BOWL LINER 1245.1
QM-4830 5963 BOWL LINER 1292.7
QM-6666 5680 BOWL LINER 1292.7
QM- 4830 6048 BOWL LINER 1660.1
QM- 6666 5681 BOWL LINER 1660.1
QM- 4830 5556 BOWL LINER 1245.1
QM- 6666 5679 BOWL LINER 1245.1
QM-4830 5421 BOWL LINER 1360.8
QM-6666 5683 BOWL LINER 1360.8
QM- 4830 5961 BOWL LINER 1401.6
QM-6666 5684 BOWL LINER 1401.6
QM-4830 5557 BOWL LINER 1179.3
QM-6666 5685 BOWL LINER 1179.3
SHANGHAI BOGVIK WEAR MATERIAL CO., LTD.
WWW.BOGVIK.COM
All manufacturers brands, names, part numbers, model numbers and descriptions are used for reference and
identification purposes only, they are owned by the respective manufacturers. BOGVIK has no affiliation with the
OEM.
w
w
w
.bogvik.com
E:sales@
bogvik.com
M
:+86
15851989372
16. QM-4830 5415 BOWL LINER 1769.0
QM-6666 5686 BOWL LINER 1769.0
QM- 4830 6231 BOWL LINER 1782.6
QM- 6666 5687 BOWL LINER 1782.6
QM- 4830 6430 BOWL LINER 1553.6
QM-6666 5688 BOWL LINER 1553.6
QM-4830 6331 BOWL LINER 1528.6
QM-6666 5689 BOWL LINER 1528.6
QM-4830 9472 BOWL LINER 3719.5
QM- 6666 5691 BOWL LINER 3719.5
QM-4830 9471 BOWL LINER 3719.5
QM-6666 5692 BOWL LINER 3719.5
QM-4830 8608 BOWL LINER 3293.1
QM-4830 8612 BOWL LINER 3293.1
QM-4830 9741 BOWL LINER 3651.4
QM-6666 5609 BOWL LINER 3651.4
QM- 4830 8556 BOWL LINER 3175.1
QM- 6666 5693 BOWL LINER 3175.1
QM- 4830 8846 BOWL LINER 3492.7
QM- 6666 5694 BOWL LINER 3492.7
QM-4830 7581 BOWL LINER 3311.2
QM-6666 5607 BOWL LINER 3311.2
QM-4830 7583 BOWL LINER 3265.9
QM-4830 7592 BOWL LINER 3265.9
QM- 4830 7491 BOWL LINER 2735.2
QM-4830 7499 BOWL LINER 2735.2
QM- 4830 7490 BOWL LINER 2825.9
SHANGHAI BOGVIK WEAR MATERIAL CO., LTD.
WWW.BOGVIK.COM
All manufacturers brands, names, part numbers, model numbers and descriptions are used for reference and
identification purposes only, they are owned by the respective manufacturers. BOGVIK has no affiliation with the
OEM.
w
w
w
.bogvik.com
E:sales@
bogvik.com
M
:+86
15851989372
17. QM-4830 7378 BOWL LINER 2540.1
QM- 6666 5695 BOWL LINER 2540.1
QM-4830 7379 BOWL LINER 2449.4
QM- 6666 5696 BOWL LINER 2449.4
QM-4830 7385 BOWL LINER 3424.6
QM-6666 5697 BOWL LINER 3424.6
QM-4830 7386 BOWL LINER 3356.6
QM- 6666 5698 BOWL LINER 3356.6
4830 8400 BOWL LINER 3129.8
6666 5699 BOWL LINER 3129.8
4830 8494 BOWL LINER 2980.1
6666 5690 BOWL LINER 2980.1
1063418 MANTLE 6124.0
1063416 CON RING 5807.0
1063410 CON RING 7877.0
1056392 MANTLE 7077.0
272-2753 CON RING 1243.0
272-2329 CON RING
272-2769 CON RING 2251.0
BD1-272-2758 CON RING 1550.0
CC-272-2429 CONE RING 639.0
1129890 CONE RING 1800.0
1129882 CONE RING 1971.0
1129847 CONE RING 1945.0
63Z59 CONCAVE RING 2600.0
SHANGHAI BOGVIK WEAR MATERIAL CO., LTD.
WWW.BOGVIK.COM
All manufacturers brands, names, part numbers, model numbers and descriptions are used for reference and
identification purposes only, they are owned by the respective manufacturers. BOGVIK has no affiliation with the
OEM.
w
w
w
.bogvik.com
E:sales@
bogvik.com
M
:+86
15851989372
18. CF272-2755 CONE RING 1016.0
D_-272-2329 CONCAVE RING
HF-272-2769 CONCAVE RING 2500.0
BC-272-2329 CONCAVE RING 891.0
AF-272-2755 CONCAVE RING 903.0
DC-272-2329 CONCAVE RING 1078.0
A-272-2332 CONCAVE RING 817.0
DA-272-2330 CONCAVE RING 1078.0
AA1-272-2329 CONCAVE RING 1120.0
A1-272-2329 CONCAVE RING 1033.0
65J93 CONCAVE RING 810.0
65J96 CONCAVE RING 790.0
63Z59 CONCAVE RING 2600.0
64A60 CONCAVE RING 2050.0
64B10.00 CONCAVE RING 1100.0
64B29.01 CONCAVE RING 610.0
64B47.00 CONCAVE RING 700.0
AE-272-2329 CONCAVE RING 1250.0
BC-272-2329 CONCAVE RING 1100.0
BD1-272-2758 CONCAVE RING 1700.0
BC1-272-2758C CONCAVE RING 1700.0
DA-272-2329 CONCAVE RING 1100.0
DC-272-2329 CONCAVE RING 1090.0
HF-272-2769 CONCAVE RING 2500.0
J-272-2753 CONCAVE RING 1350.0
JF272-2753 CONCAVE RING 1233.0
EE-272-2329 CONCAVE RING 1100.0
SHANGHAI BOGVIK WEAR MATERIAL CO., LTD.
WWW.BOGVIK.COM
All manufacturers brands, names, part numbers, model numbers and descriptions are used for reference and
identification purposes only, they are owned by the respective manufacturers. BOGVIK has no affiliation with the
OEM.
w
w
w
.bogvik.com
E:sales@
bogvik.com
M
:+86
15851989372
19. E-272-2332 Mantle 795.0
E-272-2432 Mantle 597.0
BF-272-2760 Mantle 1168.0
E-272-2329 Bowl Liner 1013.0
1157360 CONCAVE RING 116.0
1139097 CONCAVE RING 1047.0
1139445 CONCAVE RING 1066.0
1158874 CONCAVE RING 1056.0
1158940 CONCAVE RING 1075.0
B-272-432 Mantle 365.0
1122698 Mantle 1140.0
1077600 Mantle 1740.0
1129877 Bowl Liner 2044.0
1128513 Bowl Liner 2060.0
A-272-2134 Mantle 1350.0
PD-272-1629 Bowl Liner 2060.0
AB-272-1529 Bowl Liner 900.0
RXL910-M001 Mantle 4800.0
RXL910-B005 BOWL LINER 4450.0
RXL1010-B001 BOWL LINER 6600.0
BOWL LINER 6300.0
RXL1010-M001 Mantle 5350.0
15050202 Mantle 5900.0
150505203 Mantle 13800.0
150505303 Mantle 14780.0
SHANGHAI BOGVIK WEAR MATERIAL CO., LTD.
WWW.BOGVIK.COM
All manufacturers brands, names, part numbers, model numbers and descriptions are used for reference and
identification purposes only, they are owned by the respective manufacturers. BOGVIK has no affiliation with the
OEM.
w
w
w
.bogvik.com
E:sales@
bogvik.com
M
:+86
15851989372
20. RXL910-B004 BOWL LINER 4400.0
RXL1010-B003 BOWL LINER 4900.0
RXL1010-M004 Mantle 5300.0
RXL1010-B005 BOWL LINER 5980.0
RXL310-B004 Mantle 700.0
RXL310-M001 BOWL LINER 770.0
RXL910-B013 BOWL LINER 3850.0
RXL310-M002 Mantle 860.0
RXL310-B002 BOWL LINER 740.0
RXL910-M009 Mantle
RXL310-0008 Torch Ring 7.0
723005 BOWL LINER 10500.0
715538 Mantle 10800.0
RXL910-0001 Torch Ring 65.0
RXL910-0006 Torch Ring 41.0
RXL910-0011 Torch Ring 160.0
RXL31-B005 BOWL LINER 740.0
1000021787 Torch ring 90.0
RXL610-0001 Torch ring 24.0
RXL910-B002 Bowl Liner 4310.0
RXL910-M002 Mantle 4300.0
683711 Bowl Liner 4250.0
RXL2010-0001 Torch ring 65.0
RXL1010-B011 Bowl Liner 6100.0
RXL1010-M006 Mantle 7000.0
724494 Bowl Liner 6930.0
RXL1010-M001 Mantle 5450.0
SHANGHAI BOGVIK WEAR MATERIAL CO., LTD.
WWW.BOGVIK.COM
All manufacturers brands, names, part numbers, model numbers and descriptions are used for reference and
identification purposes only, they are owned by the respective manufacturers. BOGVIK has no affiliation with the
OEM.
w
w
w
.bogvik.com
E:sales@
bogvik.com
M
:+86
15851989372
21. 1000239181 Bowl Liner 3800.0
1000239182 Mantle 4380.0
2.506355 Mantle 2970.0
1000239180 Torch ring 38.0
RXL410-M004 Mantle 1300.0
RXL410-B014 Bowl Liner 1120.0
19011551-01 Mantle
22000.019011551-02 Mantle
19011551-03 Mantle
NMEF-CSZ-001 Mantle 1035.0
NBEF-CSZ-001 Bowl Liner 1025.0
RXL410-B001 Bowl Liner 1400.0
RXL410-M001 Mantle 1300.0
RXL410-B007 Bowl Liner 1390.0
RXL410-M002 Mantle 1350.0
720-87-4-1009-01 Mantle 2300.0
724558 Mantle 1300.0
724559 Mantle 1120.0
1000165029 Upper concave 530.0
1000164993 Lower concave 530.0
1000165028 Middle concave 520.0
RXL310-B001 BOWL LINER 720.0
RXL310-B003 BOWL LINER 710.0
RXL1010-B001 BOWL LINER 6790.0
1000172115 Mantle, Upper 6100.0
1000172108 Mantle, Lower 13500.0
RXL1010-B102 BOWL LINER 7100.0
SHANGHAI BOGVIK WEAR MATERIAL CO., LTD.
WWW.BOGVIK.COM
All manufacturers brands, names, part numbers, model numbers and descriptions are used for reference and
identification purposes only, they are owned by the respective manufacturers. BOGVIK has no affiliation with the
OEM.
w
w
w
.bogvik.com
E:sales@
bogvik.com
M
:+86
15851989372
22. RXL1010-M100 Mantle 7000.0
1000239161 BOWL LINER 6500.0
1000239160 Mantle 7000.0
2213 1150 MANTLE 880.0
2213 1148 Concave 874.0
TC5A 7701 MANTLE 1370.0
TC5A 7702 Concave 2390.0
TC362-1004 MANTLE 300.0
TC362-1005 MANTLE 13.0
TC362-2002 Concave 470.0
TC686 4601 MANTLE 1550.0
TC686 4802 MANTLE 210.0
TC686 4805 Concave 2020.0
TC687-1005 MANTLE 260.0
TC845 3502 MANTLE 580.0
5613 1148 Concave 780.0
TC481 3202 Concave 2800.0
TC650 3710 Concave 1827.0
TC650 3910 Concave 1950.0
TC682 1005 MANTLE 300.0
TC682 3105 Concave 1640.0
TC682 3303A Concave 1400.0
TC682 3401A Concave 1420.0
TC686 4601 MANTLE 1550.0
TC686 4705 Concave 1780.0
SHANGHAI BOGVIK WEAR MATERIAL CO., LTD.
WWW.BOGVIK.COM
All manufacturers brands, names, part numbers, model numbers and descriptions are used for reference and
identification purposes only, they are owned by the respective manufacturers. BOGVIK has no affiliation with the
OEM.
w
w
w
.bogvik.com
E:sales@
bogvik.com
M
:+86
15851989372
23. TC841 3101A MANTLE 2370.0
TC841 3101A-JC MANTLE 2399.0
TC841 3102A Concave 2730.0
TC845 3610 Concave 3650.0
HPT300.07-01 MANTLE 970.0
HPT300.05-01B MANTLE 900.0
HPT300.07-01c1 MANTLE 1000.0
HPT300.05-01B MANTLE 900.0
HST315.02.06.01 MANTLE 1180.0
HST315.03.05 MANTLE 1100.0
HST315.02.06.04 MANTLE 1170.0
HST315.03.05 MANTLE 1100.0
HST315S.02.05 MANTLE 1597.0
HST315S 02-02 MANTLE 1515.0
HST315S-03-01 MANTLE 1900.0
HST315.02.06 MANTLE 1597.0
HST315.02.06 MANTLE 1515.0
HST315S-03-01 MANTLE 1900.0
HST250S 02-06 MANTLE 950.0
HST250S 02-03 MANTLE 990.0
HST250S 03-01 MANTLE 1290.0
hst160.02-011 MANTLE 614.0
hst160.03-05 MANTLE 500.0
HPC220-08-01 MANTLE 900.0
HPC220-04-01 MANTLE 910.0
SHANGHAI BOGVIK WEAR MATERIAL CO., LTD.
WWW.BOGVIK.COM
All manufacturers brands, names, part numbers, model numbers and descriptions are used for reference and
identification purposes only, they are owned by the respective manufacturers. BOGVIK has no affiliation with the
OEM.
w
w
w
.bogvik.com
E:sales@
bogvik.com
M
:+86
15851989372
24. HPT 500.05-01 MANTLE 2000.0
HPT 500.07-01 MANTLE 2500.0
406051 MANTLE 580.0
406053 MANTLE 660.0
406055 MANTLE 680.0
456396 MANTLE 852.0
456264 MANTLE 850.0
456262 MANTLE 720.0
546034 MANTLE 1020.0
546035 MANTLE 1270.0
546036 MANTLE 1200.0
546038 MANTLE 995.0
546039 MANTLE 950.0
546747 MANTLE 1330.0
546746 MANTLE 1209.0
546748 MANTLE 1320.0
456074 MANTLE 850.0
SHANGHAI BOGVIK WEAR MATERIAL CO., LTD.
WWW.BOGVIK.COM
All manufacturers brands, names, part numbers, model numbers and descriptions are used for reference and
identification purposes only, they are owned by the respective manufacturers. BOGVIK has no affiliation with the
OEM.
w
w
w
.bogvik.com
E:sales@
bogvik.com
M
:+86
15851989372