가장 중요한 마케팅 결정은 브랜드 네이밍입니다. 제대로 된 상표권, 디자인권을 통해서 화장품 업계에서 최고의 브랜드가 될 수 있도록, BLT 특허법률사무소에서 함께합니다.
작성 : 노지혜 변리사 ( JHN@BLT.kr )
www.BLT.kr / 02-514-0104 (무료상담)
Effect of Surface Hardening Technique and Case Depth on Rolling Contact Fatig...Dave Palmer, P.E.
Surface hardening techniques are widely used to improve the rolling contact fatigue resistance of materials. This study investigated the rolling contact fatigue (RCF) resistance of hardened, ground steel rods made from three different aircraft-quality alloy steels (AISI 8620, 9310 and 4140), and hardened using different techniques (atmosphere carburizing, vacuum carburizing, and induction hardening) at different case depths. The fatigue life of the rods was determined using a three ball-on-rod rolling contact fatigue test machine. After testing, the surfaces of the rods were examined using scanning electron microscopy (SEM), and their microstructures were examined using metallographic techniques. In addition, the surface topography of the rods was measured using white-light interferometry. Relationships between surface hardness, case depth, and fatigue life were investigated. The longest lives were observed for the vacuum carburized AISI 9310 specimens, while the shortest lives were observed for the induction hardened AISI 4140 specimens. It was found the depth to a hardness of 613 HV (56 HRC), as opposed to the traditional definition of case depth as the depth to a hardness of 513 HV (50 HRC), provided a somewhat better correlation to RCF life, and the hardness at a depth of 0.254 mm provided a somewhat better correlation than the surface hardness to RCF life.
Effect of Surface Hardening Technique and Case Depth on Rolling Contact Fatig...Dave Palmer, P.E.
Surface hardening techniques are widely used to improve the rolling contact fatigue resistance of materials. This study investigated the rolling contact fatigue (RCF) resistance of hardened, ground steel rods made from three different aircraft-quality alloy steels (AISI 8620, 9310 and 4140), and hardened using different techniques (atmosphere carburizing, vacuum carburizing, and induction hardening) at different case depths. The fatigue life of the rods was determined using a three ball-on-rod rolling contact fatigue test machine. After testing, the surfaces of the rods were examined using scanning electron microscopy (SEM), and their microstructures were examined using metallographic techniques. In addition, the surface topography of the rods was measured using white-light interferometry. Relationships between surface hardness, case depth, and fatigue life were investigated. The longest lives were observed for the vacuum carburized AISI 9310 specimens, while the shortest lives were observed for the induction hardened AISI 4140 specimens. It was found the depth to a hardness of 613 HV (56 HRC), as opposed to the traditional definition of case depth as the depth to a hardness of 513 HV (50 HRC), provided a somewhat better correlation to RCF life, and the hardness at a depth of 0.254 mm provided a somewhat better correlation than the surface hardness to RCF life.
Introduction to Non ferrous metal extraction, extraction of copper, zink, plumbum, Nickel, Magnesium, Aluminium, Zirconium,Titanium, Stansium, Niobium, Uranium in pyrometallurgical routes.
its include testing of property of metal and alloy like tensile strength, hardness test,compression and torsion test, surface effect,impact test,fatigue test,creep test, mettalography, non-destructive test,etc.
Indian Rail Steel- Pearlitic and Bainitic Rails and comparisionMukuldev Khunte
This is the comparative analysis of composition and microstructure of Indian rail steel. In which the method of hardening of material has been studied.
Guided By
Prof. CB Singh
요즘 인터넷을 통해서 광고가 많아지고 또 효과적인 수단이 되고 있습니다. 이런 가운데 특정 제품에 대해 이야기를 하면 자칫 잘못하면 상표권 침해나 광고법 위반이 될 수 있다고 합니다. 이부분에 대해 간단히 분석해 보았습니다.
문의 : jhn@BLT.kr / www.BLT.kr
안녕하세요. BLT특허법률사무소 엄정한 변리사입니다.
2020년 특허청에서 제공하는 22가지 정부지원사업에 대한 총정리 설명자료입니다.
물론, 중소기업들을 위한 사업들 중심으로 정리했으며, 특허청 산하의 한국발명진흥회, 한국특허전략개발원, 한국지식재산보호원, 지역지식재산센터에서는 이보다 더 많은 내용의 지원사업들이 있습니다.
사업하시는 분들은 특허출원, 상표출원, 미국출원, 중국출원 등 각종 출원비용 지원사업이 많이 필요하실 겁니다. 본 영상은 2020년 기준으로 특허청 산하기관들이 어떤 지원사업으로 기업들을 지원하는지 30분만에 쉽게 설명한 영상입니다.
많은 기업, 스타트업들에게 도움이 되었으면 합니다.
또, 다른 기업인들을 위해서 많이 공유해주셨으면 합니다.
설명영상 https://youtu.be/2iab-Al3TWI
감사합니다.
문의 : 엄정한 변리사 (02-514-0104 / shawn@BLT.kr)
카카오톡 : @비엘티
홈페이지 : www.BLT.kr
Introduction to Non ferrous metal extraction, extraction of copper, zink, plumbum, Nickel, Magnesium, Aluminium, Zirconium,Titanium, Stansium, Niobium, Uranium in pyrometallurgical routes.
its include testing of property of metal and alloy like tensile strength, hardness test,compression and torsion test, surface effect,impact test,fatigue test,creep test, mettalography, non-destructive test,etc.
Indian Rail Steel- Pearlitic and Bainitic Rails and comparisionMukuldev Khunte
This is the comparative analysis of composition and microstructure of Indian rail steel. In which the method of hardening of material has been studied.
Guided By
Prof. CB Singh
요즘 인터넷을 통해서 광고가 많아지고 또 효과적인 수단이 되고 있습니다. 이런 가운데 특정 제품에 대해 이야기를 하면 자칫 잘못하면 상표권 침해나 광고법 위반이 될 수 있다고 합니다. 이부분에 대해 간단히 분석해 보았습니다.
문의 : jhn@BLT.kr / www.BLT.kr
안녕하세요. BLT특허법률사무소 엄정한 변리사입니다.
2020년 특허청에서 제공하는 22가지 정부지원사업에 대한 총정리 설명자료입니다.
물론, 중소기업들을 위한 사업들 중심으로 정리했으며, 특허청 산하의 한국발명진흥회, 한국특허전략개발원, 한국지식재산보호원, 지역지식재산센터에서는 이보다 더 많은 내용의 지원사업들이 있습니다.
사업하시는 분들은 특허출원, 상표출원, 미국출원, 중국출원 등 각종 출원비용 지원사업이 많이 필요하실 겁니다. 본 영상은 2020년 기준으로 특허청 산하기관들이 어떤 지원사업으로 기업들을 지원하는지 30분만에 쉽게 설명한 영상입니다.
많은 기업, 스타트업들에게 도움이 되었으면 합니다.
또, 다른 기업인들을 위해서 많이 공유해주셨으면 합니다.
설명영상 https://youtu.be/2iab-Al3TWI
감사합니다.
문의 : 엄정한 변리사 (02-514-0104 / shawn@BLT.kr)
카카오톡 : @비엘티
홈페이지 : www.BLT.kr
(Letsee) Company Introduction ver 2019_06_17JEONG HAN Eom
Letsee is AR startup from S.Korea. You can enjoy AR contents with out App install.
please contact LetSee ( mail : intnoma@letsee.io )
http://www.letsee.io/
[BLT] 수출바우처 - 수출기업이 알아야 할 지식재산권JEONG HAN Eom
[BLT] 수출바우처 - 수출기업이 알아야 할 지식재산권
해외 특허권, 해외 상표권, 해외 디자인권은 스타트업, 기업들에게 너무나 중요한 IP라고 할 수 있습니다. 수출바우처 사업을 통해서, 여러분들의 지식재산권을 탄탄하게 지키고, 해외수출에 초석을 단단하게 세우시길 바랍니다.
언제든지 무료상담이 가능하며
더 자세한 사항은 BLT특허법률사무소 (02-514-0104) 로 전화 하거나,
info@BLT.kr 로 메일 부탁드립니다. ^-^
www.BLT.kr
2017년 세법 개정으로 인한 액셀러레이터 세제혜택 요약입니다.
1. 개인이 액셀러레이터에 출자한 주식의 양도차익에 대한 비과세
-> 현재 컴퍼니비에 출자한 주주들의 주식 양도시 양도차익 비과세
2. 액셀러레이터가 직접투자 또는 투자조합을 통한 간접투자시 주식의 양도차익 및 배당소득에 대해 법인세 면세
3. 액셀러레이터가 투자 기업에 대한 주식 양도시 증권거래세 면제
4. 내국법인이 벤처기업 등에 출자시 세액공제 신설 (출자금액의 5% 법인세 세액공제)
정철영 컴퍼니비(주)
본부장| 투자심사역
met702@companyb.kr
a 경기도 성남시 분당구 대왕판교로 645번길 12 경기창조경제혁신센터 9층 R34
59. www.BLT.kr
59
국가 인정여부 Grace period 공지형태의 제한
한국 O 12개월 제한없음
미국 O 12개월 제한없음
유럽연합 O 12개월
중국 △ 6개월 중국정부인정박람회
일본 O 12개월
베트남 O 6개월
인도네시아 O 6개월
국가별신규성상실예외제도인정여부