This document contains the resume of Syed Ibrahim Bathusa, an electrical engineer with 7 years of experience. He currently works as a project supervisor for Federal Electricity & Water Authority in the UAE. Previously he has worked as an electrical engineer in Saudi Arabia and India. His responsibilities have included inspecting energy meters, issuing violation notices, replacing meters, solving problems, and answering emergencies. He also has experience operating and maintaining power plants and their equipment such as boilers, turbines, and generators.

1. SYED IBRAHIM BATHUSA s
+971 509285953
Fujairah
bathusasyed@gmail.com
Professional Summary
 Outsourcing (Dulsco) as a Project Supervisor in Federal Electricity & Water Authority,
UAE since June 2015 to present.
 Outsourced (Sharz Trading LLC) as an Electrical Engineer in Ministry Of Health, KSA
from Feb 2012 to Apr 2014.
 Worked as a Junior Electrical Engineer in Operational Energy Group India Private Ltd
(Power Plant), from Mar 2011 to Jan 2012.
 Worked as a Junior Electrical Engineer in Sunvik Steel India Private Ltd (Power Plant),
from May 2009 to Feb 2011.
Achievements
Below Some listed violations has been penalized on my observation at different areas;
 Improper connection (V10) – Fujairah Rock & Aggregate, Fujairah
 Illegal connection (V4) – Fathima Shopping Centre, Fujairah
 Tampering with meter / connection in an attempt to change the reading (V6) – Fresh &
More Hyper Market, Fujairah
 Others (V11), Defected CT – Century Mall, Fujairah
 Tampering with meter / connection in an attempt to change the reading (V6) – Shobra
Shopping Center, Fujairah
Education Qualification
 Bachelor of Engineering in Sethu Institute of Technology under Anna University, India
(2005-2009)
ELECTRICAL ENGINEER – 7 YEARS EXPERIENCE

2. Project Experience
Federal Electricity & Water Authority, UAE June 2015 to Present
Roles and Responsibilities
 Inspecting the energy meter (1ph, 3ph, CT, TMC & BMC) on daily basis for various accounts
at all over FEWA coverage areas. (Fujairah,Dibba)
 Issuing violation / observation notice to consumers if any violation is found.
 Replacing the energy meters and CT at the time of requirement.
 Solving the problems analytically and making decisions.
 Updating the daily work progress reports on SAP (System Application and Products)
 Accessing and meeting the various accounts through GIS (Geographic Information systems)
 Answering emergencies on a 24/7 basis.
Ministry Of health, Saudi Arabia Feb 2012 to Apr 2014
Roles and Responsibilities
 The oil level in oil cap under silica gel breather must be checked in one month interval. if it
is found the transformer oil inside the cup comes below the specified level, oil to be top up
as specified level.
 Breathing holes in silica gel breather should also be checked monthly and properly cleaned
if required, for proper breathing action.
 Reading of MOG (MAGNETIC OIL GAGE) of main tank and conservator.
 If the transformer has oil filled bushing the oil level of transformer oil inside the bushing
must be visually checked in the oil gage attached to those bushing. This action also to be
done monthly basis.
 Inspect alternator connections. These should be clean and free of corrosion. Clean or
replace as needed. Inspect all ground wires. Maintain clean and functioning grounds.
Application of anti-corrosion spray is desirable.
 Inspect the water pump front end for leakage. Replace as needed. Check the cooling system
coolant level and condition. Replace or add as needed. Inspect the cooling system belt
condition and tension. Pay close attention to any cracks or tears. Replace as needed.
 Check for any leaks in your fuel system. Drain and repair as needed. Check the condition of
fuel filters and replace them as needed.
 The air blast circuit breaker there is some special cares to be taken in addition to general
instruction of maintenance of operating mechanism. Actually for operating mechanism and
for other some features the maintenance process and schedule are same for all oil circuit
breaker, air circuit breaker,SF6 circuit breaker, the air leakage should be checked as when
it is required. If leakage found, plug the leakage.

3. OEG India P( Ltd )Mar 2011 to Jan 2012
Roles and Responsibilities
Capacity : 85MW
 Ensure maintenance and efficient day to day operations of all plant boilers, feed water
pumps, turbine, generators, electrical distribution system, air compressors, etc.
 Develop and implement preventive and predictive maintenance programs for all key utility
equipment such as boilers, feed water pumps, turbine generators, electrical distribution
system, air compressors, etc.
 Identify and quantify potential savings associated with efficient use of steam, power and
water.
 Synchronizing the two side’s voltage and frequency (Grid and TG).
 To find out fault identification of earth fault, over load fault.
 Making daily reports of power generation in import and export
 Monitoring the apparent power, active power, reactive power, frequency, voltage, winding
temperature and motor amps.
 Erection and commissioning in panels, motors and transformers.
 Examines machinery or mechanical equipment and identifies reason for malfunction.
 Ability to perform inspections and make necessary adjustments to conform to job
specifications.
 Operates controls and adjusts machinery to generate electric power, using control boards
or semiautomatic equipment; monitors control and switchboard gauges to determine if
electrical power distribution meets specifications.
 Ability to operate and maintain utility plant equipment.
 Ability to test systems and log results.
Sunvik Steel P (Ltd), India May 2009 to Feb 2011
Roles and Responsibilities
Capacity : 10MW
 Operates, cleans and performs preventative maintenance on rotating and stationary
equipment, to include high pressure boilers and auxiliary equipment.

4.  Operates boilers and auxiliary equipment and controls the generation of steam, chilled
water, electricity, and compressed air through the use of programmable logic controllers or
desktop computer based controls.
 Operates controls and adjusts machinery to generate electric power, using control boards
or semiautomatic equipment; monitors control and switchboard gauges to determine if
electrical power distribution meets specifications.
 Continuously monitors various gauges and automatic recording devices at specified times
to assess operating conditions.
 Tests, operates, and performs preventative maintenance on emergency generators.
 Examines machinery or mechanical equipment and identifies reason for malfunction.
 Ensures proper care in the use and maintenance of equipment and supplies.
 Knowledge of high pressure boilers, compressors, turbines, generating units.
 Ability to operate and maintain utility plant equipment.
 Ability to test systems and log results.
 Ability to perform inspections and make necessary adjustments to conform to job
specifications.
Personal Details
Name : Syed Ibrahim Bathusa. A
Sex : Male
Marital status : Single.
Language known : English, Hindi, Arabic, Malayalam and Tamil.
Passport No : H6210549
UAE Driving License No : 188350
DECLARATION
I hereby declare that the above written particulars are true to the best of my Knowledge and belief.
(SYED IBRAHIM BATHUSA)