BATCH 2(AAGCVM).pptx
•Download as PPTX, PDF•
0 likes•12 views
This document describes the fabrication of an automatic adjusting ground clearance vehicle model. It includes definitions of ground clearance, diagrams of how ground clearance works, and descriptions of how ground clearance sensors function to determine the distance between a vehicle's undercarriage and the road based on environmental data. Applications are discussed such as integrating this system into military, construction, and planetary rover vehicles to allow for travel over rough and uneven terrain while preventing damage.
Report
Share
Report
Share
Recommended
Design of expressway
The document discusses the design of an expressway in India. It includes sections on the need for expressways to reduce travel time and improve safety. Traffic data was collected including average daily volumes of different vehicle types. Geometric design considerations are outlined for the expressway such as a design speed of 120 kmph, lane width of 21m, and sight distances. Pavement design was conducted using a traffic volume of 7.2 million standard axles over 15 years, determining a pavement thickness of 660mm. The layout and future scope of increasing expressway construction to reduce congestion are also mentioned.
Construction of multi storied machanised (semi-automatic) car
The document proposes the construction of a parking lot in Srinagar, Jammu and Kashmir to address traffic congestion issues. Currently, the main issues are inadequate parking space leading to on-street parking that clogs roads. Surveys found that 44% of parking is on-street. The proposed parking lot would be a 5-level semi-automatic puzzle parking structure located near Lal Chowk providing over 1000 square meters of parking space. This would help reduce traffic and improve circulation in the congested downtown area.
Roads & bridges
This document provides information on roads and bridges construction standards in India. It discusses the classification of roads from national highways to rural roads and the design standards prescribed by the Indian Road Congress. It outlines the key factors considered in road design like traffic volume projections, growth rates, design life, soil strength parameters. Design of flexible pavements is based on guidelines in IRC 37:2001 which requires data on initial traffic, terrain, vehicle damage factor to compute the cumulative standard axles over the design life. Subgrade strength is crucial and is assessed using the California Bearing Ratio test. Preparation of subgrade and use of sub-base materials like gravel or stabilized soil is also specified.
road-asset-management-survey-services.pdf
Lion Engineering Consultants Private Limited is an engineering consulting firm established in 2002 that provides various infrastructure consulting services. It has over 945 employees working across 55 offices in India. The company works with various government agencies on projects related to roads, bridges, urban planning, and more. It uses specialized equipment and technologies like automatic traffic counters, network survey vehicles, falling weight deflectometers, and mobile bridge inspection units to conduct surveys and assess infrastructure assets.
3. HIGHWAY GEOMETRIC DESIGN.pdf
This document discusses the geometric design of highways. It describes how the geometric design deals with elements like the cross section, sight distances, horizontal and vertical alignments, and intersections. It emphasizes that the geometric design is important to plan initially since it is difficult and expensive to alter later. The key factors that influence the geometric design are then outlined, including topography, design speed, traffic factors, and environmental considerations. Specific aspects of the cross section design like the pavement width, camber, and types of medians and kerbs are also covered.
Transportation Engineering -21CV52- Module 2
The document discusses the key elements of highway geometric design, including cross-section elements, sight distance considerations, horizontal and vertical alignment details, and intersection elements. It outlines several design factors that control geometric design, such as design speed, topography, traffic factors, and environmental factors. Specific cross-section elements covered include pavement surface type and properties, cross slope or camber to drain water, and recommended camber values.
Recommended
Design of expressway
The document discusses the design of an expressway in India. It includes sections on the need for expressways to reduce travel time and improve safety. Traffic data was collected including average daily volumes of different vehicle types. Geometric design considerations are outlined for the expressway such as a design speed of 120 kmph, lane width of 21m, and sight distances. Pavement design was conducted using a traffic volume of 7.2 million standard axles over 15 years, determining a pavement thickness of 660mm. The layout and future scope of increasing expressway construction to reduce congestion are also mentioned.
Construction of multi storied machanised (semi-automatic) car
The document proposes the construction of a parking lot in Srinagar, Jammu and Kashmir to address traffic congestion issues. Currently, the main issues are inadequate parking space leading to on-street parking that clogs roads. Surveys found that 44% of parking is on-street. The proposed parking lot would be a 5-level semi-automatic puzzle parking structure located near Lal Chowk providing over 1000 square meters of parking space. This would help reduce traffic and improve circulation in the congested downtown area.
Roads & bridges
This document provides information on roads and bridges construction standards in India. It discusses the classification of roads from national highways to rural roads and the design standards prescribed by the Indian Road Congress. It outlines the key factors considered in road design like traffic volume projections, growth rates, design life, soil strength parameters. Design of flexible pavements is based on guidelines in IRC 37:2001 which requires data on initial traffic, terrain, vehicle damage factor to compute the cumulative standard axles over the design life. Subgrade strength is crucial and is assessed using the California Bearing Ratio test. Preparation of subgrade and use of sub-base materials like gravel or stabilized soil is also specified.
road-asset-management-survey-services.pdf
Lion Engineering Consultants Private Limited is an engineering consulting firm established in 2002 that provides various infrastructure consulting services. It has over 945 employees working across 55 offices in India. The company works with various government agencies on projects related to roads, bridges, urban planning, and more. It uses specialized equipment and technologies like automatic traffic counters, network survey vehicles, falling weight deflectometers, and mobile bridge inspection units to conduct surveys and assess infrastructure assets.
3. HIGHWAY GEOMETRIC DESIGN.pdf
This document discusses the geometric design of highways. It describes how the geometric design deals with elements like the cross section, sight distances, horizontal and vertical alignments, and intersections. It emphasizes that the geometric design is important to plan initially since it is difficult and expensive to alter later. The key factors that influence the geometric design are then outlined, including topography, design speed, traffic factors, and environmental considerations. Specific aspects of the cross section design like the pavement width, camber, and types of medians and kerbs are also covered.
Transportation Engineering -21CV52- Module 2
The document discusses the key elements of highway geometric design, including cross-section elements, sight distance considerations, horizontal and vertical alignment details, and intersection elements. It outlines several design factors that control geometric design, such as design speed, topography, traffic factors, and environmental factors. Specific cross-section elements covered include pavement surface type and properties, cross slope or camber to drain water, and recommended camber values.
Chapter 3 geometric design
This document discusses key aspects of highway geometric design, including:
- Highway geometric design involves designing elements like cross-sections, horizontal and vertical alignments, sight distances, and intersections within economic limitations and traffic requirements.
- Design controls and criteria are influenced by factors such as road classification, terrain, traffic volumes, design vehicle, design speed, sight distance, and land use.
- Elements of road cross-sections include traffic lanes, shoulders, medians, barriers, curbs, gutters, and sidewalks. Lane and shoulder widths vary based on road type and conditions.
- Horizontal alignment connects straight sections and uses circular curves, which are classified as simple, compound, reverse, or broken back curves based on curvature
1 geometric design elements of road by malyar talash
This document provides guidelines for road geometric design. It discusses key elements like design speed, sight distance, horizontal and vertical alignment. Design speed determines other elements and impacts safety, mobility and efficiency. Sight distance requirements include stopping sight distance, decision sight distance and intersection sight distance. Horizontal alignment discusses curve types like simple, compound, spiral curves. It provides controls for curvature based on deflection angles and radii.
IRJET- Design and Analysis of Flexible Pavement in Amaravati Governemnt C...
This document summarizes the design and analysis of flexible pavements for a government complex in Amravati, India. It describes surveying the site using drones and GPS, testing the soil properties including moisture content and bearing capacity, and estimating traffic levels of 5 million standard axles over the design life. The flexible pavement design was performed using IRC code guidelines based on the soil test results and traffic estimate. Key layers of the flexible pavement include granular sub-base and bituminous surface.
Integrate with AGVs - Webinar Presentation by FlexQube
- What is an AGV?
- History of the AGV
- AGV tasks in material handling
- Why use AGVs?
- Different types of AGVs
- AGV guidance methods
- Designing carts for AGV
Proving grounds(Automobile)
This document discusses vehicle testing at proving grounds. It begins by defining a proving ground as an area where vehicle performance is tested, often over hundreds of acres with various road conditions. It then describes different types of test tracks at proving grounds for evaluating vehicles at high speeds, slow speeds, off-road, and custom conditions. Specific tests are outlined for each track type to gather data on braking, engine performance, durability, and more. Sensors are used to record data which is analyzed to assess the vehicle. Finally, a general layout of a proving ground is shown along with facilities commonly available.
guidelines for design of flexible pavementpresentation.pptx
its a guideline for desgin of flexible pavement .
Roads design as per IRC 37
The document discusses different types of roads in India and their geometric design elements. It provides details on calculating the pavement thickness for water bound macadam roads based on traffic volume data and soil strength. The summary construction involves spreading aggregates in layers, rolling, adding screenings, sprinkling water and binding material to fill voids, and allowing it to dry before further construction. Proper drainage is emphasized to prevent water damage to the road pavement.
IRJET- Design of Parking Area and Traffic Signal for Moodbidri Town based...
This document summarizes a study on designing a parking area and traffic signal for Moodbidri Town, India based on traffic studies. Traffic surveys were conducted to study vehicle volumes during peak and non-peak hours. Based on the results, a multi-storey parking facility was designed and parking demand was estimated. Traffic volume counts were converted to passenger car units to design a signalized intersection near Hanuman Temple. Using standard methods from the Indian Road Congress, the optimal traffic signal cycle time was calculated as 50 seconds with green times of 29 seconds and 14 seconds for the two approaches.
Horizontal curve- IRC 38
The document discusses the geometric design of roads, specifically horizontal curves. It covers key elements of geometric design like alignment, profile, and cross-section. Horizontal curve design is an important part that influences safety and efficiency. Parameters like design speed, superelevation, extra widening, and minimum radius are discussed in detail according to Indian Road Congress standards. Methods for building superelevation and effecting widening on curves are also summarized.
Overview of the RSACRP Project
The RSACRP project involved conducting road safety audits and crash reduction programs on roads in Indonesia. It delivered 16 road safety audit reports on EINRIP projects and crash reduction reports and engineering drawings for 30 sites. The project aimed to improve road safety through proactive measures like road safety audits during planning and design, and reactive measures like black spot management. It provided guidance on implementing road safety audit recommendations and definitions for black spots. Key issues addressed included shoulder widths, delineation, and end wall protections.
Analysis of Traffic Congestion Characteristics for M.G. Road, AGRA
This document analyzes traffic congestion characteristics on M.G. Road in Agra, India. Data was collected through video recordings and field surveys at three sections: Diwani crossing to Sursadan Tirtha, Sursadan Tiraha to Hariparvat Crossing, and Hariparvat Crossing to St. Johns Crossing. Traffic flow, speed, travel time, and geometric characteristics were measured. Speed and vehicle data is presented in tables for three junctions: Diwani Chaouraha, St. Johns Chaouraha, and Hariparvat Chaouraha. The analysis aims to understand traffic patterns to improve traffic management facilities on the congested M.G. Road
Formula 1 Track Design & Safety
Formula One is the highest class of single-seater auto racing sanctioned by the Fédération Internationale de l'Automobile and owned by the Formula One Group. To Organize such a sporting event with high risk of death is a big challenge and to face and overcome such challenge Science & Engineering come forward.
Parking geometry
This document discusses considerations for parking area design, including needs analysis, physical requirements, and aesthetics. It outlines factors to consider in a parking study such as inventorying existing spaces and analyzing problems. Physical design considerations include siting parking areas, orientation, grading, drainage, radius curves, and types of parking areas like perpendicular, angled, and special vehicle spaces. The goal is to design aesthetically pleasing and functional parking areas that meet user needs.
parking problems in metro cities
presentation contain different problems related to parking aspects in metro cities and its ongoing solution including modern ways to reduce parking problems in metro cities.
IRJET- Study of Multilevel Vehicular Parking
This document discusses a study of multilevel vehicular parking. It begins with an introduction that outlines the growing automobile industry in India and resulting parking problems like traffic congestion. It then describes the methodology used, which involved dividing the 3-level parking area into sections and collecting data on vehicle inflow and outflow over 12-hour periods on two days. The data is then analyzed to determine parking statistics such as accumulation, volume, load, duration, and turnover. Finally, a table compares the peak parking demand to the total parking capacity.
Unit- 3 Highway Geometric design
The document discusses various elements of highway geometric design including cross-section elements, sight distance considerations, horizontal and vertical alignment details, and intersection elements. It provides guidelines for elements like pavement width, super elevation, horizontal curve radius, and transition curves based on factors such as design speed, terrain, and traffic volume. The key objectives of geometric design elements are to ensure safety, comfort, and efficient traffic flow.
Studying parking policies and proposing solutions for illegally parked vehicl...
This document summarizes a research paper that studied parking issues and proposed solutions in the North and East zones of Surat City, India. The researchers conducted surveys at various parking sites over 15 days to analyze parking demand and supply. They found that some areas like Mansarovar Road and VIP Circle lacked sufficient road width for on-street parking. Other busy areas like Baroda Prestige Market and Maruti Chowk required multi-level parking structures due to high demand. The researchers proposed on-street and off-street parking solutions for 5 specific locations to address parking shortages and reduce illegal parking. These solutions included increasing road widths for on-street spaces and constructing off-street lots and multi-level structures. However,
group 1.pptx
This document presents the project of analyzing and designing a multi-storey parking building in Varanasi, India. It was presented by 5 students under the supervision of Prof. Pratyush. The project aims to reduce traffic congestion and parking issues in Varanasi by constructing a G+3 multi-storey parking building with separate floors for cars and bikes. The students used software like Staad Pro, AutoCAD, and Revit to plan, model, analyze, and design the building and its structural components according to codes like NBC and IS standards. The conclusion is that the multi-storey parking building can effectively reduce traffic issues if constructed in Varanasi.
Chapter 2 Road geometrics
This document discusses the key elements of highway geometric design including cross-section elements, sight distance considerations, horizontal and vertical alignment details, and intersection elements. It covers factors that affect highway geometric design such as design speed, topography, traffic, capacity, and environmental factors. It provides details on cross-section components, sight distance requirements, horizontal and vertical curves, and overtaking sight distance calculations. The objective of highway geometric design is to provide efficient traffic operation with maximum safety at reasonable cost.
Village networking ppt
Here are the key steps for designing the flexible pavement:
1. Design life = 15 years (as per guidelines for highways)
2. Traffic growth rate = 5% per annum (assumed)
3. Calculate design traffic in msa using traffic growth rate and design life
4. Conduct soil tests to determine CBR value of subgrade soil
5. Select pavement layers and their thicknesses using design charts as per IRC guidelines based on design traffic and CBR value.
6. Check stability and serviceability requirements are satisfied.
7. Specify materials, compaction requirements and construction methods for each pavement layer.
8. Prepare detailed cost estimate and drawings for construction.
Presentation on Food Delivery Systems
This presentation is about Food Delivery Systems and how they are developed using the Software Development Life Cycle (SDLC) and other methods. It explains the steps involved in creating a food delivery app, from planning and designing to testing and launching. The slide also covers different tools and technologies used to make these systems work efficiently.
More Related Content
Similar to BATCH 2(AAGCVM).pptx
Chapter 3 geometric design
This document discusses key aspects of highway geometric design, including:
- Highway geometric design involves designing elements like cross-sections, horizontal and vertical alignments, sight distances, and intersections within economic limitations and traffic requirements.
- Design controls and criteria are influenced by factors such as road classification, terrain, traffic volumes, design vehicle, design speed, sight distance, and land use.
- Elements of road cross-sections include traffic lanes, shoulders, medians, barriers, curbs, gutters, and sidewalks. Lane and shoulder widths vary based on road type and conditions.
- Horizontal alignment connects straight sections and uses circular curves, which are classified as simple, compound, reverse, or broken back curves based on curvature
1 geometric design elements of road by malyar talash
This document provides guidelines for road geometric design. It discusses key elements like design speed, sight distance, horizontal and vertical alignment. Design speed determines other elements and impacts safety, mobility and efficiency. Sight distance requirements include stopping sight distance, decision sight distance and intersection sight distance. Horizontal alignment discusses curve types like simple, compound, spiral curves. It provides controls for curvature based on deflection angles and radii.
IRJET- Design and Analysis of Flexible Pavement in Amaravati Governemnt C...
This document summarizes the design and analysis of flexible pavements for a government complex in Amravati, India. It describes surveying the site using drones and GPS, testing the soil properties including moisture content and bearing capacity, and estimating traffic levels of 5 million standard axles over the design life. The flexible pavement design was performed using IRC code guidelines based on the soil test results and traffic estimate. Key layers of the flexible pavement include granular sub-base and bituminous surface.
Integrate with AGVs - Webinar Presentation by FlexQube
- What is an AGV?
- History of the AGV
- AGV tasks in material handling
- Why use AGVs?
- Different types of AGVs
- AGV guidance methods
- Designing carts for AGV
Proving grounds(Automobile)
This document discusses vehicle testing at proving grounds. It begins by defining a proving ground as an area where vehicle performance is tested, often over hundreds of acres with various road conditions. It then describes different types of test tracks at proving grounds for evaluating vehicles at high speeds, slow speeds, off-road, and custom conditions. Specific tests are outlined for each track type to gather data on braking, engine performance, durability, and more. Sensors are used to record data which is analyzed to assess the vehicle. Finally, a general layout of a proving ground is shown along with facilities commonly available.
guidelines for design of flexible pavementpresentation.pptx
its a guideline for desgin of flexible pavement .
Roads design as per IRC 37
The document discusses different types of roads in India and their geometric design elements. It provides details on calculating the pavement thickness for water bound macadam roads based on traffic volume data and soil strength. The summary construction involves spreading aggregates in layers, rolling, adding screenings, sprinkling water and binding material to fill voids, and allowing it to dry before further construction. Proper drainage is emphasized to prevent water damage to the road pavement.
IRJET- Design of Parking Area and Traffic Signal for Moodbidri Town based...
This document summarizes a study on designing a parking area and traffic signal for Moodbidri Town, India based on traffic studies. Traffic surveys were conducted to study vehicle volumes during peak and non-peak hours. Based on the results, a multi-storey parking facility was designed and parking demand was estimated. Traffic volume counts were converted to passenger car units to design a signalized intersection near Hanuman Temple. Using standard methods from the Indian Road Congress, the optimal traffic signal cycle time was calculated as 50 seconds with green times of 29 seconds and 14 seconds for the two approaches.
Horizontal curve- IRC 38
The document discusses the geometric design of roads, specifically horizontal curves. It covers key elements of geometric design like alignment, profile, and cross-section. Horizontal curve design is an important part that influences safety and efficiency. Parameters like design speed, superelevation, extra widening, and minimum radius are discussed in detail according to Indian Road Congress standards. Methods for building superelevation and effecting widening on curves are also summarized.
Overview of the RSACRP Project
The RSACRP project involved conducting road safety audits and crash reduction programs on roads in Indonesia. It delivered 16 road safety audit reports on EINRIP projects and crash reduction reports and engineering drawings for 30 sites. The project aimed to improve road safety through proactive measures like road safety audits during planning and design, and reactive measures like black spot management. It provided guidance on implementing road safety audit recommendations and definitions for black spots. Key issues addressed included shoulder widths, delineation, and end wall protections.
Analysis of Traffic Congestion Characteristics for M.G. Road, AGRA
This document analyzes traffic congestion characteristics on M.G. Road in Agra, India. Data was collected through video recordings and field surveys at three sections: Diwani crossing to Sursadan Tirtha, Sursadan Tiraha to Hariparvat Crossing, and Hariparvat Crossing to St. Johns Crossing. Traffic flow, speed, travel time, and geometric characteristics were measured. Speed and vehicle data is presented in tables for three junctions: Diwani Chaouraha, St. Johns Chaouraha, and Hariparvat Chaouraha. The analysis aims to understand traffic patterns to improve traffic management facilities on the congested M.G. Road
Formula 1 Track Design & Safety
Formula One is the highest class of single-seater auto racing sanctioned by the Fédération Internationale de l'Automobile and owned by the Formula One Group. To Organize such a sporting event with high risk of death is a big challenge and to face and overcome such challenge Science & Engineering come forward.
Parking geometry
This document discusses considerations for parking area design, including needs analysis, physical requirements, and aesthetics. It outlines factors to consider in a parking study such as inventorying existing spaces and analyzing problems. Physical design considerations include siting parking areas, orientation, grading, drainage, radius curves, and types of parking areas like perpendicular, angled, and special vehicle spaces. The goal is to design aesthetically pleasing and functional parking areas that meet user needs.
parking problems in metro cities
presentation contain different problems related to parking aspects in metro cities and its ongoing solution including modern ways to reduce parking problems in metro cities.
IRJET- Study of Multilevel Vehicular Parking
This document discusses a study of multilevel vehicular parking. It begins with an introduction that outlines the growing automobile industry in India and resulting parking problems like traffic congestion. It then describes the methodology used, which involved dividing the 3-level parking area into sections and collecting data on vehicle inflow and outflow over 12-hour periods on two days. The data is then analyzed to determine parking statistics such as accumulation, volume, load, duration, and turnover. Finally, a table compares the peak parking demand to the total parking capacity.
Unit- 3 Highway Geometric design
The document discusses various elements of highway geometric design including cross-section elements, sight distance considerations, horizontal and vertical alignment details, and intersection elements. It provides guidelines for elements like pavement width, super elevation, horizontal curve radius, and transition curves based on factors such as design speed, terrain, and traffic volume. The key objectives of geometric design elements are to ensure safety, comfort, and efficient traffic flow.
Studying parking policies and proposing solutions for illegally parked vehicl...
This document summarizes a research paper that studied parking issues and proposed solutions in the North and East zones of Surat City, India. The researchers conducted surveys at various parking sites over 15 days to analyze parking demand and supply. They found that some areas like Mansarovar Road and VIP Circle lacked sufficient road width for on-street parking. Other busy areas like Baroda Prestige Market and Maruti Chowk required multi-level parking structures due to high demand. The researchers proposed on-street and off-street parking solutions for 5 specific locations to address parking shortages and reduce illegal parking. These solutions included increasing road widths for on-street spaces and constructing off-street lots and multi-level structures. However,
group 1.pptx
This document presents the project of analyzing and designing a multi-storey parking building in Varanasi, India. It was presented by 5 students under the supervision of Prof. Pratyush. The project aims to reduce traffic congestion and parking issues in Varanasi by constructing a G+3 multi-storey parking building with separate floors for cars and bikes. The students used software like Staad Pro, AutoCAD, and Revit to plan, model, analyze, and design the building and its structural components according to codes like NBC and IS standards. The conclusion is that the multi-storey parking building can effectively reduce traffic issues if constructed in Varanasi.
Chapter 2 Road geometrics
This document discusses the key elements of highway geometric design including cross-section elements, sight distance considerations, horizontal and vertical alignment details, and intersection elements. It covers factors that affect highway geometric design such as design speed, topography, traffic, capacity, and environmental factors. It provides details on cross-section components, sight distance requirements, horizontal and vertical curves, and overtaking sight distance calculations. The objective of highway geometric design is to provide efficient traffic operation with maximum safety at reasonable cost.
Village networking ppt
Here are the key steps for designing the flexible pavement:
1. Design life = 15 years (as per guidelines for highways)
2. Traffic growth rate = 5% per annum (assumed)
3. Calculate design traffic in msa using traffic growth rate and design life
4. Conduct soil tests to determine CBR value of subgrade soil
5. Select pavement layers and their thicknesses using design charts as per IRC guidelines based on design traffic and CBR value.
6. Check stability and serviceability requirements are satisfied.
7. Specify materials, compaction requirements and construction methods for each pavement layer.
8. Prepare detailed cost estimate and drawings for construction.
Similar to BATCH 2(AAGCVM).pptx (20)
1 geometric design elements of road by malyar talash
1 geometric design elements of road by malyar talash
IRJET- Design and Analysis of Flexible Pavement in Amaravati Governemnt C...
IRJET- Design and Analysis of Flexible Pavement in Amaravati Governemnt C...
Integrate with AGVs - Webinar Presentation by FlexQube
Integrate with AGVs - Webinar Presentation by FlexQube
guidelines for design of flexible pavementpresentation.pptx
guidelines for design of flexible pavementpresentation.pptx
IRJET- Design of Parking Area and Traffic Signal for Moodbidri Town based...
IRJET- Design of Parking Area and Traffic Signal for Moodbidri Town based...
Analysis of Traffic Congestion Characteristics for M.G. Road, AGRA
Analysis of Traffic Congestion Characteristics for M.G. Road, AGRA
Studying parking policies and proposing solutions for illegally parked vehicl...
Studying parking policies and proposing solutions for illegally parked vehicl...
Recently uploaded
Presentation on Food Delivery Systems
This presentation is about Food Delivery Systems and how they are developed using the Software Development Life Cycle (SDLC) and other methods. It explains the steps involved in creating a food delivery app, from planning and designing to testing and launching. The slide also covers different tools and technologies used to make these systems work efficiently.
Call For Paper -3rd International Conference on Artificial Intelligence Advan...
* Registration is currently open *
Call for Research Papers!!!
Free – Extended Paper will be published as free of cost.
3rd International Conference on Artificial Intelligence Advances (AIAD 2024)
July 13 ~ 14, 2024, Virtual Conference
Webpage URL: https://aiad2024.org/index
Submission Deadline: June 22, 2024
Submission System URL:
https://aiad2024.org/submission/index.php
Contact Us:
Here's where you can reach us : aiad@aiad2024.org (or) aiadconference@yahoo.com
WikiCFP URL: http://wikicfp.com/cfp/servlet/event.showcfp?eventid=180509©ownerid=171656
#artificialintelligence #softcomputing #machinelearning #technology #datascience #python #deeplearning #tech #robotics #innovation #bigdata #coding #iot #computerscience #data #dataanalytics #engineering #robot #datascientist #software #automation #analytics #ml #pythonprogramming #programmer #digitaltransformation #developer #promptengineering #generativeai #genai #chatgpt #artificial #intelligence #datamining #networkscommunications #robotics #callforsubmission #submissionsopen #deadline #opencall #virtual #conference
Impartiality as per ISO /IEC 17025:2017 Standard
This document provides basic guidelines for imparitallity requirement of ISO 17025. It defines in detial how it is met and wiudhwdih jdhsjdhwudjwkdbjwkdddddddddddkkkkkkkkkkkkkkkkkkkkkkkwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwioiiiiiiiiiiiii uwwwwwwwwwwwwwwwwhe wiqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq gbbbbbbbbbbbbb owdjjjjjjjjjjjjjjjjjjjj widhi owqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq uwdhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhwqiiiiiiiiiiiiiiiiiiiiiiiiiiiiw0pooooojjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj whhhhhhhhhhh wheeeeeeee wihieiiiiii wihe
e qqqqqqqqqqeuwiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiqw dddddddddd cccccccccccccccv s w c r
cdf cb bicbsad ishd d qwkbdwiur e wetwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwww w
dddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddfffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffw
uuuuhhhhhhhhhhhhhhhhhhhhhhhhe qiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii iqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccc ccccccccccccccccccccccccccccccccccc bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbu uuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuum
m
m mmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmm m i
g i dijsd sjdnsjd ndjajsdnnsa adjdnawddddddddddddd uw
Open Channel Flow: fluid flow with a free surface
Open Channel Flow: This topic focuses on fluid flow with a free surface, such as in rivers, canals, and drainage ditches. Key concepts include the classification of flow types (steady vs. unsteady, uniform vs. non-uniform), hydraulic radius, flow resistance, Manning's equation, critical flow conditions, and energy and momentum principles. It also covers flow measurement techniques, gradually varied flow analysis, and the design of open channels. Understanding these principles is vital for effective water resource management and engineering applications.
FULL STACK PROGRAMMING - Both Front End and Back End
This ppt gives details about Full Stack Programming and its basics.
AI + Data Community Tour - Build the Next Generation of Apps with the Einstei...
AI + Data Community Tour - Build the Next Generation of Apps with the Einstei...Paris Salesforce Developer Group
Build the Next Generation of Apps with the Einstein 1 Platform.
Rejoignez Philippe Ozil pour une session de workshops qui vous guidera à travers les détails de la plateforme Einstein 1, l'importance des données pour la création d'applications d'intelligence artificielle et les différents outils et technologies que Salesforce propose pour vous apporter tous les bénéfices de l'IA.一比一原版(USF毕业证)旧金山大学毕业证如何办理
原件一模一样【微信：95270640】【旧金山大学毕业证USF学位证成绩单】【微信：95270640】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：95270640】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：95270640】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份【微信：95270640】
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
办理旧金山大学毕业证毕业证学位证USF学位证【微信：95270640 】外观非常精致，由特殊纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理旧金山大学毕业证USF学位证毕业证学位证【微信：95270640 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理旧金山大学毕业证毕业证学位证USF学位证【微信：95270640 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理旧金山大学毕业证毕业证学位证USF学位证【微信：95270640 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
Sri Guru Hargobind Ji - Bandi Chor Guru.pdf
Sri Guru Hargobind Ji (19 June 1595 - 3 March 1644) is revered as the Sixth Nanak.
• On 25 May 1606 Guru Arjan nominated his son Sri Hargobind Ji as his successor. Shortly
afterwards, Guru Arjan was arrested, tortured and killed by order of the Mogul Emperor
Jahangir.
• Guru Hargobind's succession ceremony took place on 24 June 1606. He was barely
eleven years old when he became 6th Guru.
• As ordered by Guru Arjan Dev Ji, he put on two swords, one indicated his spiritual
authority (PIRI) and the other, his temporal authority (MIRI). He thus for the first time
initiated military tradition in the Sikh faith to resist religious persecution, protect
people’s freedom and independence to practice religion by choice. He transformed
Sikhs to be Saints and Soldier.
• He had a long tenure as Guru, lasting 37 years, 9 months and 3 days
A high-Speed Communication System is based on the Design of a Bi-NoC Router, ...
The Network on Chip (NoC) has emerged as an effective
solution for intercommunication infrastructure within System on
Chip (SoC) designs, overcoming the limitations of traditional
methods that face significant bottlenecks. However, the complexity
of NoC design presents numerous challenges related to
performance metrics such as scalability, latency, power
consumption, and signal integrity. This project addresses the
issues within the router's memory unit and proposes an enhanced
memory structure. To achieve efficient data transfer, FIFO buffers
are implemented in distributed RAM and virtual channels for
FPGA-based NoC. The project introduces advanced FIFO-based
memory units within the NoC router, assessing their performance
in a Bi-directional NoC (Bi-NoC) configuration. The primary
objective is to reduce the router's workload while enhancing the
FIFO internal structure. To further improve data transfer speed,
a Bi-NoC with a self-configurable intercommunication channel is
suggested. Simulation and synthesis results demonstrate
guaranteed throughput, predictable latency, and equitable
network access, showing significant improvement over previous
designs
DESIGN AND MANUFACTURE OF CEILING BOARD USING SAWDUST AND WASTE CARTON MATERI...
The need for ecofriendly materials as building materials in this century cannot be overemphasized
Digital Twins Computer Networking Paper Presentation.pptx
A Digital Twin in computer networking is a virtual representation of a physical network, used to simulate, analyze, and optimize network performance and reliability. It leverages real-time data to enhance network management, predict issues, and improve decision-making processes.
Butterfly Valves Manufacturer (LBF Series).pdf
We have designed & manufacture the Lubi Valves LBF series type of Butterfly Valves for General Utility Water applications as well as for HVAC applications.
一比一原版(osu毕业证书)美国俄勒冈州立大学毕业证如何办理
原版一模一样【微信：741003700 】【(osu毕业证书)美国俄勒冈州立大学毕业证成绩单】【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
办理(osu毕业证书)美国俄勒冈州立大学毕业证【微信：741003700 】外观非常简单，由纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理(osu毕业证书)美国俄勒冈州立大学毕业证【微信：741003700 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理(osu毕业证书)美国俄勒冈州立大学毕业证【微信：741003700 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理(osu毕业证书)美国俄勒冈州立大学毕业证【微信：741003700 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
Determination of Equivalent Circuit parameters and performance characteristic...
Includes the testing of induction motor to draw the circle diagram of induction motor with step wise procedure and calculation for the same. Also explains the working and application of Induction generator
原版制作(Humboldt毕业证书)柏林大学毕业证学位证一模一样
原件一模一样【微信：bwp0011】《(Humboldt毕业证书)柏林大学毕业证学位证》【微信：bwp0011】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问微bwp0011
【主营项目】
一.毕业证【微bwp0011】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【微bwp0011】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Recently uploaded (20)
1FIDIC-CONSTRUCTION-CONTRACT-2ND-ED-2017-RED-BOOK.pdf
1FIDIC-CONSTRUCTION-CONTRACT-2ND-ED-2017-RED-BOOK.pdf
Call For Paper -3rd International Conference on Artificial Intelligence Advan...
Call For Paper -3rd International Conference on Artificial Intelligence Advan...
FULL STACK PROGRAMMING - Both Front End and Back End
FULL STACK PROGRAMMING - Both Front End and Back End
AI + Data Community Tour - Build the Next Generation of Apps with the Einstei...
AI + Data Community Tour - Build the Next Generation of Apps with the Einstei...
A high-Speed Communication System is based on the Design of a Bi-NoC Router, ...
A high-Speed Communication System is based on the Design of a Bi-NoC Router, ...
DESIGN AND MANUFACTURE OF CEILING BOARD USING SAWDUST AND WASTE CARTON MATERI...
DESIGN AND MANUFACTURE OF CEILING BOARD USING SAWDUST AND WASTE CARTON MATERI...
Digital Twins Computer Networking Paper Presentation.pptx
Digital Twins Computer Networking Paper Presentation.pptx
SENTIMENT ANALYSIS ON PPT AND Project template_.pptx
SENTIMENT ANALYSIS ON PPT AND Project template_.pptx
Determination of Equivalent Circuit parameters and performance characteristic...
Determination of Equivalent Circuit parameters and performance characteristic...
BATCH 2(AAGCVM).pptx
- 1. FABRICATION OF AUTOMATIC ADJUSTING GROUND CLEARANCE VEHICLE MODEL • A .AKSHAY – REG.No : 19TB0102 • A .DINESH – REG.No : 19TB0116 • S .SAIBALAJI – REG.No : 19TB0175 • J .SANJAI – REG.No : 19TB0176 Under the Guidance of I . GIRIPRASATH, B.Tech.,ME., ASSOCIATE PROFESSOR Department of Mechanical engineering SMVEC
- 2. CONTENTS • Definition Of GROUND CLEARANCE • Basic Diagram of GROUND CLEARANCE • Working of GROUND CLEARANCE SENSOR • Applications of AUTOMATIC ADJUSTING GROUND CLEARANCE of vehicle • Hand drawn diagram representing the working of the model • Reference
- 3. DEFINITION OF GROUND CLEARANCE •Ground clearance means the distance between your car's undercarriage and the road. Higher ground clearance not only allows you easy rides on unlevelled roads in the city, but it also helps you greatly when you cruise through rough terrains on your adventurous trips.
- 4. BASIC DIAGRAM OF GROUND CLEARANCE
- 5. Working of GROUND CLEARANCE SENSORS • Ground clearance assistant for motor vehicle, has sensor unit for detecting environmental data and evaluation unit, by which ground clearance of motor vehicle is determined on basis of environmental data. • The ground clearance assistant (2) has a sensor unit (3) for detecting environmental data and an evaluation unit (4), by which a ground clearance (D1) of the motor vehicle (1) is determined on the basis of environmental data. A compression path of a damper unit of a chassis (5) is restricted by a mechanical locking device (6). The sensor unit is arranged in the front or rear bumper unit. An independent claim is also included for a method for operating a ground clearance assistant.
- 7. APPLICATIONS OF AUTOMATIC ADJUSTING GROUND CLEARANACE OF VEHICLES 1)We can integrate this system in military vehicles that need to travel on off roads quite often. 2)This system traces its use in various construction vehicles which are peculiarly subjected to rough roads and cause many accidents due to obstacle hitting. 3)The low ground clearance vehicles can have this system to counter bumpers or speed breaker to ensure that vehicle does not get damaged on the chassis. 4)This system can briefly be used on rovers that are sent on other planets like mars rover so that it can operate on clingy roads.
- 8. REFERENCES •|| Volume 4 || Special Issue 9 || ICCEME 2019-2020 || ISSN (Online) 2456-0774 INTERNATIONAL JOURNAL OF ADVANCE SCIENTIFIC RESEARCH AND ENGINEERING TRENDS •https://patents.google.com/patent/DE102011108218A1 /en
- 9. THANK YOU…🙏