This test report from SGS Testing Korea Co., Ltd. summarizes the results of safety testing on a baby play mat. The mat was tested for mechanical and physical properties, flammability, and migration of certain elements. It passed all tests for compliance with International Standards ISO 8124-1, ISO 8124-2, and ISO 8124-3. Samples of the mat in different colors were analyzed and found to contain no detectable heavy metals such as lead, antimony, arsenic, or cadmium above the method detection limits.
This test report from SGS Korea Co., Ltd. summarizes the results of safety testing on a baby play mat. The mat was tested according to European toy safety standards and passed all tests for mechanical properties, flammability, and migration of certain elements. Testing was conducted for mechanical properties, flammability, and levels of restricted substances between April 28 and May 4, 2011 on samples of the mat in various colors. All test results indicated the mat complied with the relevant toy safety standards.
En71 part1 safety of toy mechanical & physical propertiespbsuser
SGS Testing Korea tested a kids' playmat ("Dwinguler Kid’s Playmat") submitted by I&S. The playmat passed all tests for mechanical and physical properties under the European Standard EN71 Part 1. This included tests for sharp edges, small parts, impact resistance, and other safety requirements. SGS recommends the toy include the manufacturer name and address as well as a CE marking to indicate conformity with European safety standards. The playmat was determined to be safe for all ages.
This test report from SGS Testing Korea provides the results of flammability testing on a Dwinguler Kids' Playmat. The playmat passed testing according to the EN71 Part 2 standard. Testing showed no surface flash occurred when tested under clause 4.1. Clause 4.5 testing for burning rate was not applicable since the toy is less than 150mm in dimension. In conclusion, the playmat was found to pass flammability testing requirements.
This document is an approval sheet from HT-TECH CORPORATION for a power inductor. It includes:
1. Specifications for the part number HNT2512MT1R0-E, including electrical characteristics, mechanical dimensions, and test conditions.
2. A coil inspection report with test data showing the part meets specifications for inductance, DC resistance, and physical dimensions.
3. Reliability test conditions and results for environmental and physical characteristic tests to ensure product quality and reliability.
The test report provides results for a sample of polyolefin shrink film submitted by Shandong Zhongsu Taifu Technology Co.,Ltd. Testing was conducted to determine total extractives when immersed in n-hexane at 50°C for 2 hours and in xylene at 25°C for 2 hours, as well as the density of the sample, in accordance with FDA regulation 21 CFR 177.1520. The total extractives were 0.88% in n-hexane and 0.22% in xylene, and the density was 0.913 g/cm3, all within specified limits. A photograph of the sample is also included.
The audit summary report is for Dongguan changsheng silicone products CO.,LTD. The full audit was conducted on June 24, 2015 and found areas of improvement were needed in some areas and good compliance in others. Key areas needing improvement included ensuring workers are aware of their legal rights, limiting monthly overtime hours to 36 hours or less, establishing a worker representative election process, conducting risk assessments for transmittable/non-transmittable diseases, providing occupational health checks to all workers exposed to hazards, and displaying accident procedures. Corrective action plans with deadlines were agreed to address the issues.
This document provides information about product certification and certification marks for retailers considering purchasing plumbing products. It explains that product certification ensures products have met regulatory requirements and provides assurance to retailers. It details which products require certification marks and that certification is mandatory for market entry in North America. The benefits of certification for retailers include protection from liability and verification that supplier safety claims are valid. It also summarizes the key attributes and acceptance of Intertek's WH certification mark.
SBM-Investor-Presentation-April-2022
Sirona Biochem was founded in 2009 by its current Chairman and CEO, Dr. Howard Verrico. The Company’s first transaction was to acquire an exclusive global license to TFChem’s proprietary diabetes drug, the SGLT2 Inhibitor.
This test report from SGS Korea Co., Ltd. summarizes the results of safety testing on a baby play mat. The mat was tested according to European toy safety standards and passed all tests for mechanical properties, flammability, and migration of certain elements. Testing was conducted for mechanical properties, flammability, and levels of restricted substances between April 28 and May 4, 2011 on samples of the mat in various colors. All test results indicated the mat complied with the relevant toy safety standards.
En71 part1 safety of toy mechanical & physical propertiespbsuser
SGS Testing Korea tested a kids' playmat ("Dwinguler Kid’s Playmat") submitted by I&S. The playmat passed all tests for mechanical and physical properties under the European Standard EN71 Part 1. This included tests for sharp edges, small parts, impact resistance, and other safety requirements. SGS recommends the toy include the manufacturer name and address as well as a CE marking to indicate conformity with European safety standards. The playmat was determined to be safe for all ages.
This test report from SGS Testing Korea provides the results of flammability testing on a Dwinguler Kids' Playmat. The playmat passed testing according to the EN71 Part 2 standard. Testing showed no surface flash occurred when tested under clause 4.1. Clause 4.5 testing for burning rate was not applicable since the toy is less than 150mm in dimension. In conclusion, the playmat was found to pass flammability testing requirements.
This document is an approval sheet from HT-TECH CORPORATION for a power inductor. It includes:
1. Specifications for the part number HNT2512MT1R0-E, including electrical characteristics, mechanical dimensions, and test conditions.
2. A coil inspection report with test data showing the part meets specifications for inductance, DC resistance, and physical dimensions.
3. Reliability test conditions and results for environmental and physical characteristic tests to ensure product quality and reliability.
The test report provides results for a sample of polyolefin shrink film submitted by Shandong Zhongsu Taifu Technology Co.,Ltd. Testing was conducted to determine total extractives when immersed in n-hexane at 50°C for 2 hours and in xylene at 25°C for 2 hours, as well as the density of the sample, in accordance with FDA regulation 21 CFR 177.1520. The total extractives were 0.88% in n-hexane and 0.22% in xylene, and the density was 0.913 g/cm3, all within specified limits. A photograph of the sample is also included.
The audit summary report is for Dongguan changsheng silicone products CO.,LTD. The full audit was conducted on June 24, 2015 and found areas of improvement were needed in some areas and good compliance in others. Key areas needing improvement included ensuring workers are aware of their legal rights, limiting monthly overtime hours to 36 hours or less, establishing a worker representative election process, conducting risk assessments for transmittable/non-transmittable diseases, providing occupational health checks to all workers exposed to hazards, and displaying accident procedures. Corrective action plans with deadlines were agreed to address the issues.
This document provides information about product certification and certification marks for retailers considering purchasing plumbing products. It explains that product certification ensures products have met regulatory requirements and provides assurance to retailers. It details which products require certification marks and that certification is mandatory for market entry in North America. The benefits of certification for retailers include protection from liability and verification that supplier safety claims are valid. It also summarizes the key attributes and acceptance of Intertek's WH certification mark.
SBM-Investor-Presentation-April-2022
Sirona Biochem was founded in 2009 by its current Chairman and CEO, Dr. Howard Verrico. The Company’s first transaction was to acquire an exclusive global license to TFChem’s proprietary diabetes drug, the SGLT2 Inhibitor.
En71 part3 safety of toy migration of certain elementspbsuser
This test report from SGS Testing Korea Co., Ltd summarizes the results of testing samples of a children's playmat for migration of certain elements according to European standard EN 71 Part 3. Testing found no detectable levels of lead, antimony, arsenic, barium, cadmium, chromium, mercury, or selenium in samples of the playmat's red, green, orange, blue, brown, yellow, and black PVC materials. The playmat was determined to pass all requirements for safety of toys regarding migration of elements.
Us cpsia(consumer product safety improvement act) reportpbsuser
SGS Testing Korea tested a Dwinguler (Green Play Mat) for lead and phthalates content. Test results found:
1) Lead content was not detected in any of the 9 substrate materials tested and was below the required limit.
2) Phthalate content was not detected in the 2 materials tested and was below individual component limits.
3) The product was found to comply with lead and phthalate restrictions of the Consumer Product Safety Improvement Act.
This CV summarizes Mahender Singh's professional experience and qualifications. He has over 15 years of experience in administration and HR roles at various schools and companies in India and Dubai. His most recent role was as Admin Officer at CD International School from 2012-2015, where he oversaw facilities, transportation, admissions, and staff management. He has strong computer skills and the ability to manage multiple tasks.
NES Global Talent is an experienced global talent provider that offers various staffing solutions tailored to clients' needs. They have over 35 years of experience in industries like oil and gas, power, infrastructure, and engineering. Their solutions include permanent hire, contingency hire, search and selection, retained search, project direct hire, and multi-national deployment. They have a global network of over 500 consultants and 40 offices worldwide to source candidates. They guarantee to find clients the right talent through their expertise and access to the global talent pool.
This document discusses NES Global Talent's expertise in providing research and consultancy services to clients. It offers industry research, management of legislation and contractual risk, and recruitment process consultancy. Services include producing bespoke reports on staffing trends, salaries, talent availability and projects. Consultants have expertise placing over 5,000 staff annually globally. The company helps clients understand legislation, ensure compliance, and manage risk. It also advises on streamlining recruitment and onboarding processes. Case studies provide examples of tailored solutions and positive outcomes for clients.
Makalah ini membahas tentang pembelajaran berbasis komputer, meliputi pengertian, bentuk, model, fungsi, serta kelebihan dan kekururangannya. Pembelajaran berbasis komputer adalah sistem pengajaran yang menghubungkan muatan akademik dengan teknologi untuk menghasilkan makna bagi siswa. Ada beberapa modelnya seperti drill and practice, tutorial, simulasi, dan computer manajemen instruction. Komputer bermanfaat untuk tujuan kognit
The document discusses various recruitment outsourcing solutions offered by NES Global Talent, including:
1) Managed services that allow clients to outsource all or part of their recruitment processes to improve performance and quality.
2) Contingent workforce solutions that manage a client's entire contract staffing activity under a single operation.
3) Permanent recruitment process outsourcing (RPO) that allows clients to outsource direct hiring to access a global talent pool.
4) Fully integrated RPO that incorporates a client's contract, permanent, graduate, and executive hiring into a single outsourced solution.
The initial team of Riga Powerhouse.
The mission of the Riga Powerhouse is to unite creative cells of Riga city (city’s creative and intellectual potential) under one roof and in a collaborative working environment jointly implement crucial ideas for the development of Latvia.
Marketing Project with Pfizer Inc. Italia (Milan) and Università Cattolica del Sacro Cuore.
Developed an innovative online platform aimed at boosting company/patients relation and the exchange of reliable information, all in strict accordance with the Italian regulations.
The project was supervised by Matteo Cervellati, country brand leader of Pfizer Italy.
Modul ini membahas tentang mencangkok sebagai salah satu cara perkembangbiakan vegetatif tumbuhan. Definisi mencangkok adalah memperbanyak tanaman dengan cara menghilangkan kambium pada batang dan membiarkan akar tumbuh. Langkah-langkah mencangkok meliputi memilih batang, menghilangkan kambium, memberi pupuk, dan membalut dengan media tanam. Keuntungan mencangkok antara lain tanaman hasilnya sama dengan induk
This document discusses how the author will address the 7 evaluation questions using different presentation technologies. For question 1, the author will use SlideShare to creatively kickstart the evaluation. For question 2, PowToon will allow the author to express creativity in representing social groups. Emaze will give question 3 a professional appearance through its illustrations. Prezi will make question 4 more enjoyable given its length. SlideShare will visually explain how the author attracted their audience for question 5. SlideShare again will clearly address what the author has learned about technologies for question 6. And Prezi will engage the audience in the author's progression from their preliminary task for question 7.
The document outlines the preliminary planning for a school film project, including using a room near the school hall for filming, props needed like chairs and a table, and a basic timeline showing a character walking in and sitting down opposite another character before they start talking and one runs away screaming. It also mentions overhead plans and camera angles, and costumes including the protagonist wearing a shirt, jumper and tie to look smarter while the other character will dress more casually in an untucked shirt to seem tougher.
Lynn Daley is an administrative assistant and clerical worker with over 25 years of experience in customer service, clerical work, and administrative support. She has strong skills in Microsoft Office, accounting, budgeting, scheduling, training, and problem-solving. Her work experience includes roles as an administrative assistant, clerical worker, cashier, and residential aide. She is accurate, organized, and able to multi-task and meet deadlines.
This short document promotes creating presentations using Haiku Deck, a tool for making slideshows. It encourages the reader to get started making their own Haiku Deck presentation and sharing it on SlideShare. In just one sentence, it pitches the idea of using Haiku Deck to easily create engaging slideshows.
This is a promotional campaign made to re-market Utica Club to a newer, younger, more professional market. The campaign includes a number of different promotions including: consumer promotions, trade promotions, sales force promotions, and others designed to appeal to our researched target market.
Hvad betyder et godt porteføljeoverblik for forretningen?, Keld Ellesgaard - ...Mediehuset Ingeniøren Live
Arla IT PMO's Senior Manager Keld Ellesgaard fortæller om mulighederne og gevinsterne ved at have en PPM løsning.
Baggrund for at se på ny PPM-løsning, og Arla ITs målsætning med et ny værktøj
PMO behov og værktøjsunderstøttelse vs. forretningens behov for gennemsigtighed, hastighed og fleksibilitet.
Kritiske succesfaktorer og fik vi dem opfyldt
The document discusses the GRID Extra Dimensions Theory, which proposes that:
- Space and time are quantized into discrete units called quantum cells around the size of the Planck length.
- New non-local dimensions called the GRID exist between these quantum cells and are responsible for quantum phenomena like entanglement.
- These extra dimensions allow for instantaneous "spooky action at a distance" by enabling immediate signaling between quantum cells, bypassing the speed of light.
Slide per gli workshop sull'openness tenuti all'Università di studi di Perugia
a cura di Cristiano Donato e Tommaso Vicarelli (Assegnisti di ricerca dell'Università di Perugia)
Test Report of Rhinestone from SGS for Heavy metal contentCharles Kay
This test report from SGS Testing Korea provides results of lead testing on a sample submitted by Amazing Co., Ltd. The sample consisted of one rhinestone crystal piece (A) and metal stud (B) with glue. Testing found 60.4 mg/kg of lead in part A but lead was not detected in part B above the 5 mg/kg detection limit. The report provides details of the testing methodology and concludes with a picture of the sample as received.
Test Report of Rhinestone from SGS for Appearance after washingCharles Kay
This test report from SGS Testing Korea summarizes the results of tests conducted on a sample of hotfix stone crystal submitted by Amazing Co., Ltd. The sample showed no noticeable change in appearance after 30 wash cycles. Specifically, washing the sample using the standard hand wash cold and line dry method left its general appearance satisfactory. The report provides details of the testing period, procedures, and results, concluding that the sample meets the specified requirements.
En71 part3 safety of toy migration of certain elementspbsuser
This test report from SGS Testing Korea Co., Ltd summarizes the results of testing samples of a children's playmat for migration of certain elements according to European standard EN 71 Part 3. Testing found no detectable levels of lead, antimony, arsenic, barium, cadmium, chromium, mercury, or selenium in samples of the playmat's red, green, orange, blue, brown, yellow, and black PVC materials. The playmat was determined to pass all requirements for safety of toys regarding migration of elements.
Us cpsia(consumer product safety improvement act) reportpbsuser
SGS Testing Korea tested a Dwinguler (Green Play Mat) for lead and phthalates content. Test results found:
1) Lead content was not detected in any of the 9 substrate materials tested and was below the required limit.
2) Phthalate content was not detected in the 2 materials tested and was below individual component limits.
3) The product was found to comply with lead and phthalate restrictions of the Consumer Product Safety Improvement Act.
This CV summarizes Mahender Singh's professional experience and qualifications. He has over 15 years of experience in administration and HR roles at various schools and companies in India and Dubai. His most recent role was as Admin Officer at CD International School from 2012-2015, where he oversaw facilities, transportation, admissions, and staff management. He has strong computer skills and the ability to manage multiple tasks.
NES Global Talent is an experienced global talent provider that offers various staffing solutions tailored to clients' needs. They have over 35 years of experience in industries like oil and gas, power, infrastructure, and engineering. Their solutions include permanent hire, contingency hire, search and selection, retained search, project direct hire, and multi-national deployment. They have a global network of over 500 consultants and 40 offices worldwide to source candidates. They guarantee to find clients the right talent through their expertise and access to the global talent pool.
This document discusses NES Global Talent's expertise in providing research and consultancy services to clients. It offers industry research, management of legislation and contractual risk, and recruitment process consultancy. Services include producing bespoke reports on staffing trends, salaries, talent availability and projects. Consultants have expertise placing over 5,000 staff annually globally. The company helps clients understand legislation, ensure compliance, and manage risk. It also advises on streamlining recruitment and onboarding processes. Case studies provide examples of tailored solutions and positive outcomes for clients.
Makalah ini membahas tentang pembelajaran berbasis komputer, meliputi pengertian, bentuk, model, fungsi, serta kelebihan dan kekururangannya. Pembelajaran berbasis komputer adalah sistem pengajaran yang menghubungkan muatan akademik dengan teknologi untuk menghasilkan makna bagi siswa. Ada beberapa modelnya seperti drill and practice, tutorial, simulasi, dan computer manajemen instruction. Komputer bermanfaat untuk tujuan kognit
The document discusses various recruitment outsourcing solutions offered by NES Global Talent, including:
1) Managed services that allow clients to outsource all or part of their recruitment processes to improve performance and quality.
2) Contingent workforce solutions that manage a client's entire contract staffing activity under a single operation.
3) Permanent recruitment process outsourcing (RPO) that allows clients to outsource direct hiring to access a global talent pool.
4) Fully integrated RPO that incorporates a client's contract, permanent, graduate, and executive hiring into a single outsourced solution.
The initial team of Riga Powerhouse.
The mission of the Riga Powerhouse is to unite creative cells of Riga city (city’s creative and intellectual potential) under one roof and in a collaborative working environment jointly implement crucial ideas for the development of Latvia.
Marketing Project with Pfizer Inc. Italia (Milan) and Università Cattolica del Sacro Cuore.
Developed an innovative online platform aimed at boosting company/patients relation and the exchange of reliable information, all in strict accordance with the Italian regulations.
The project was supervised by Matteo Cervellati, country brand leader of Pfizer Italy.
Modul ini membahas tentang mencangkok sebagai salah satu cara perkembangbiakan vegetatif tumbuhan. Definisi mencangkok adalah memperbanyak tanaman dengan cara menghilangkan kambium pada batang dan membiarkan akar tumbuh. Langkah-langkah mencangkok meliputi memilih batang, menghilangkan kambium, memberi pupuk, dan membalut dengan media tanam. Keuntungan mencangkok antara lain tanaman hasilnya sama dengan induk
This document discusses how the author will address the 7 evaluation questions using different presentation technologies. For question 1, the author will use SlideShare to creatively kickstart the evaluation. For question 2, PowToon will allow the author to express creativity in representing social groups. Emaze will give question 3 a professional appearance through its illustrations. Prezi will make question 4 more enjoyable given its length. SlideShare will visually explain how the author attracted their audience for question 5. SlideShare again will clearly address what the author has learned about technologies for question 6. And Prezi will engage the audience in the author's progression from their preliminary task for question 7.
The document outlines the preliminary planning for a school film project, including using a room near the school hall for filming, props needed like chairs and a table, and a basic timeline showing a character walking in and sitting down opposite another character before they start talking and one runs away screaming. It also mentions overhead plans and camera angles, and costumes including the protagonist wearing a shirt, jumper and tie to look smarter while the other character will dress more casually in an untucked shirt to seem tougher.
Lynn Daley is an administrative assistant and clerical worker with over 25 years of experience in customer service, clerical work, and administrative support. She has strong skills in Microsoft Office, accounting, budgeting, scheduling, training, and problem-solving. Her work experience includes roles as an administrative assistant, clerical worker, cashier, and residential aide. She is accurate, organized, and able to multi-task and meet deadlines.
This short document promotes creating presentations using Haiku Deck, a tool for making slideshows. It encourages the reader to get started making their own Haiku Deck presentation and sharing it on SlideShare. In just one sentence, it pitches the idea of using Haiku Deck to easily create engaging slideshows.
This is a promotional campaign made to re-market Utica Club to a newer, younger, more professional market. The campaign includes a number of different promotions including: consumer promotions, trade promotions, sales force promotions, and others designed to appeal to our researched target market.
Hvad betyder et godt porteføljeoverblik for forretningen?, Keld Ellesgaard - ...Mediehuset Ingeniøren Live
Arla IT PMO's Senior Manager Keld Ellesgaard fortæller om mulighederne og gevinsterne ved at have en PPM løsning.
Baggrund for at se på ny PPM-løsning, og Arla ITs målsætning med et ny værktøj
PMO behov og værktøjsunderstøttelse vs. forretningens behov for gennemsigtighed, hastighed og fleksibilitet.
Kritiske succesfaktorer og fik vi dem opfyldt
The document discusses the GRID Extra Dimensions Theory, which proposes that:
- Space and time are quantized into discrete units called quantum cells around the size of the Planck length.
- New non-local dimensions called the GRID exist between these quantum cells and are responsible for quantum phenomena like entanglement.
- These extra dimensions allow for instantaneous "spooky action at a distance" by enabling immediate signaling between quantum cells, bypassing the speed of light.
Slide per gli workshop sull'openness tenuti all'Università di studi di Perugia
a cura di Cristiano Donato e Tommaso Vicarelli (Assegnisti di ricerca dell'Università di Perugia)
Test Report of Rhinestone from SGS for Heavy metal contentCharles Kay
This test report from SGS Testing Korea provides results of lead testing on a sample submitted by Amazing Co., Ltd. The sample consisted of one rhinestone crystal piece (A) and metal stud (B) with glue. Testing found 60.4 mg/kg of lead in part A but lead was not detected in part B above the 5 mg/kg detection limit. The report provides details of the testing methodology and concludes with a picture of the sample as received.
Test Report of Rhinestone from SGS for Appearance after washingCharles Kay
This test report from SGS Testing Korea summarizes the results of tests conducted on a sample of hotfix stone crystal submitted by Amazing Co., Ltd. The sample showed no noticeable change in appearance after 30 wash cycles. Specifically, washing the sample using the standard hand wash cold and line dry method left its general appearance satisfactory. The report provides details of the testing period, procedures, and results, concluding that the sample meets the specified requirements.
SGS Testing Korea Co., Ltd. conducted testing on ink samples submitted by SAMYOUNG INK & PAINT MFG CO., LTD. The testing screened for substances of very high concern according to the REACH regulation and found no substances above reporting limits. The report provides details on test methods, substances screened for, and results.
This document is a test report from SGS Taiwan Ltd. that summarizes the results of tests conducted on a sample of CORNING GORILLA® GLASS Style/Item No. GORILLA® 2319 provided by CORNING DISPLAY TECHNOLOGIES TAIWAN CO., LTD. The report details that testing was performed between December 10, 2015 and December 17, 2015 to analyze the sample for substances including cadmium, lead, mercury, hexavalent chromium, polybrominated biphenyls, polybrominated diphenyl ethers, and phthalates. The test results indicated that all measured substances were not detected in the sample.
This test report provides results for samples of silica gel granules submitted by Tej Chemical Industries. Testing was conducted from September 6-12, 2013 at the Consumer Testing Services Laboratory. The samples were found to contain non-detectable levels of penta chloro phenol and dimethyl fumarate, below the detection limits of 0.5 ppm and 0.1 mg/kg respectively. The report provides details of the test methods and results for quality control purposes.
The test report provides the results of chemical analysis of a sample received from DING OIL International Trade Co.,Ltd between October 5-15, 2015. The report details the testing methods used and findings for various properties such as specific gravity, viscosity, flash point, pour point, and levels of elements like sulfur, lead, cadmium and mercury. The sample was found to meet specifications for these characteristics and elements were either not detected or within allowed limits.
The document is a product specification sheet for SMD chip common mode chokes. It includes:
1. Product name, specifications, customer information, and contact details.
2. Description of the product shape, size, applications, features, and test equipment.
3. Standard electrical specifications including impedance, DC resistance, current rating, and tolerance.
4. Recommended PCB layout pattern, tape and reel specifications, common mode performance curve, and electrical performance test procedures.
5. Material safety data sheet.
The Report issued by supervising inspectorate(SGS-CSTC Standards Technical Services CO. Ltd) confirm that:
Company name: Guangzhou Zhilitong Electromechanical Co.,Ltd
Showroom: Http://zhilitong.en.made-in-china.com
Address: 1/F, 2nd Building, 287 Longxi Road, Liwan District, Guangzhou, Guangdong, China
Product: Testing Equipment
has been on site audited for the following scope of activity
1. General Information
2. Production Capacity & Quality Control
3. Photos
General Comments:
Guangzhou Zhilitong Electromechanical Co., Ltd is a manufacturer with 19 employees; it was established in 1991, located in 1/F, 2nd Building, 287 Longxi Road, Liwan District, Guangzhou, Guangdong, China; The workshops occupy an area of more than 600 square
meters, and the main product is testing equipment, the company has its own brand
Sign for and on behalf of
SGS-CSTC Standards Technical Services Co,Ltd
This document is an approval sheet from HT-TECH CORPORATION for a customer. It includes:
1. Specification sheets describing the product specifications, dimensions, electrical characteristics, and reliability test conditions.
2. Inspection reports with test data for electrical characteristics and dimensions, as well as results within specifications.
3. SGS REPORT providing results of tests for various substances like lead, cadmium, mercury, and others, all of which were not detected above the method detection limits.
He Bei Cheng Da FRP Co., Ltd. is a Chinese manufacturer of GRP tanks, FRP pressure vessels, and plastic pipes and fittings located in Hengshui, Hebei. The report summarizes an on-site audit conducted of the company by SGS on March 25, 2016. Key details include:
1) The company was established in 2002 and has 104 employees. It has passed ISO, ISO 14001, and OHSAS certifications.
2) The audit assessed the company's management systems, production capacity, quality control, and other areas.
3) The company produces FRP tanks, pressure vessels, and other products on machinery like fiberglass winding machines in
This document discusses various topics related to purchasing products from Alibaba and China, including:
- What Alibaba is and whether it is trustworthy
- Whether products from China are good
- How to contact potential suppliers on Alibaba
- Tips for safe purchasing on Alibaba such as using trade assurance
- Different shipping options like air vs sea freight
The document provides advice and answers frequently asked questions for importing products from China using Alibaba.
This test report summarizes the results of an overall migration test conducted on samples of "Viro Synthetic Rattan" submitted by Viro Fiber. The samples were tested for migration into various food simulants, including water, acetic acid, ethanol and olive oil, in accordance with European standards. The test results showed that the migration levels for all simulants were below the overall migration limit of 10 mg/dm2 set by European Commission Directive 2002/72/EC. Therefore, the "Viro Synthetic Rattan" sample was found to meet the overall migration requirements of the Directive.
The document provides an overview of new testing and certification requirements under the Consumer Product Safety Improvement Act (CPSIA) as amended by recent legislation. It discusses key provisions including:
- Certification will now be required for products subject to CPSC standards, as enforcement stays have lifted.
- The Component Testing Rule allows certification based on component part testing, but requires extensive documentation.
- The new Testing and Certification Rule establishes recordkeeping and periodic testing requirements to provide a "high degree of assurance" of ongoing compliance for children's products. It outlines three options for periodic testing.
- Material changes will require retesting and recertification. Undue influence policies and training are also required.
This two-page test report from SGS Testing Korea Co., Ltd summarizes the results of testing samples of NEW MDK K INK BASE submitted by SAMYOUNG INK & PAINT MFG CO., LTD. The samples were tested for levels of perfluorooctanoic acid and perfluorooctane sulfonates and found to be not detected above the method detection limit of 1 mg/kg for both substances. The report provides details of the testing performed, samples analyzed, test methods used, and results obtained.
Kingdom of Bahrain | Single Use Plastic Products Licensing GuideRashed Isa
The document summarizes the plastic products licensing procedure in Bahrain, including:
- Applicants must submit an application form and documents like ISO 14001 certification and lab test reports to the Environmental Licensing Section at the Supreme Council for Environment.
- Plastic product licenses are valid for one year, and the council issues a serial number for each product.
- Manufacturers must affix the conformity marking on products and print the serial number with the marking at a clear, readable resolution according to standards.
The document then provides application forms, license templates, and appendices specifying requirements like marking dimensions, permitted heavy metal limits, and labeling information.
This audit report summarizes an on-site audit of Shida Battery Technology Co., Ltd. located in Foshan, China. The company manufactures batteries including RC batteries, UAV batteries, drone batteries, and jump starter batteries. It has 1,134 employees, owns its brand in China, and has passed ISO9001 certification. The report evaluates the company's production capacity, quality control systems, management systems, trade capacity, and R&D capabilities.
SPLC 2018 Summit: Strategies for specifying sustainable products services SPLCouncil
Slides from Anastasia O'Rourke, Special Consultant, Industrial Economics, Inc., Stacey Foreman, Manager Sustainable Procurement Program, City of Portland & Holly Elwood, Senior Advisor, US EPA presented at the Sustainable Purchasing Leadership Council's 2018 Summit in Minneapolis, MN.
Australia medical device registration and approval process - EMERGOEMERGO
1. To register a medical device in Australia, manufacturers must first determine the device's classification using Australia's regulations and submit an application through an Australian sponsor.
2. The sponsor will submit the application along with supporting documents to the Therapeutic Goods Administration (TGA) for review and approval.
3. If approved, the TGA will provide an Australian Register of Therapeutic Goods (ARTG) listing number allowing marketing in Australia. Listings do not expire as long as annual fees are paid and the device is not changed.
HMIRA Trade Secret Registrations in CanadaDell Tech
How to register for an exemption to disclose confidential business information otherwise required by Hazard Products Regulations (HPR) on your Safety Data Sheet (SDS) or Label.
ECO32 Analytical Report - Hydrocarbon RefrigerantMiel Van Opstal
ECO-32 is a blend of high purity propane R290 and ethane R170. It is a reduced global-warming-potential (GWP) refrigerant. It is designed to replace R410a and R32 in most stationary residential and commercial air conditioning systems.
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...University of Maribor
Slides from talk presenting:
Aleš Zamuda: Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapter and Networking.
Presentation at IcETRAN 2024 session:
"Inter-Society Networking Panel GRSS/MTT-S/CIS
Panel Session: Promoting Connection and Cooperation"
IEEE Slovenia GRSS
IEEE Serbia and Montenegro MTT-S
IEEE Slovenia CIS
11TH INTERNATIONAL CONFERENCE ON ELECTRICAL, ELECTRONIC AND COMPUTING ENGINEERING
3-6 June 2024, Niš, Serbia
Advanced control scheme of doubly fed induction generator for wind turbine us...IJECEIAES
This paper describes a speed control device for generating electrical energy on an electricity network based on the doubly fed induction generator (DFIG) used for wind power conversion systems. At first, a double-fed induction generator model was constructed. A control law is formulated to govern the flow of energy between the stator of a DFIG and the energy network using three types of controllers: proportional integral (PI), sliding mode controller (SMC) and second order sliding mode controller (SOSMC). Their different results in terms of power reference tracking, reaction to unexpected speed fluctuations, sensitivity to perturbations, and resilience against machine parameter alterations are compared. MATLAB/Simulink was used to conduct the simulations for the preceding study. Multiple simulations have shown very satisfying results, and the investigations demonstrate the efficacy and power-enhancing capabilities of the suggested control system.
Using recycled concrete aggregates (RCA) for pavements is crucial to achieving sustainability. Implementing RCA for new pavement can minimize carbon footprint, conserve natural resources, reduce harmful emissions, and lower life cycle costs. Compared to natural aggregate (NA), RCA pavement has fewer comprehensive studies and sustainability assessments.
Literature Review Basics and Understanding Reference Management.pptxDr Ramhari Poudyal
Three-day training on academic research focuses on analytical tools at United Technical College, supported by the University Grant Commission, Nepal. 24-26 May 2024
Harnessing WebAssembly for Real-time Stateless Streaming PipelinesChristina Lin
Traditionally, dealing with real-time data pipelines has involved significant overhead, even for straightforward tasks like data transformation or masking. However, in this talk, we’ll venture into the dynamic realm of WebAssembly (WASM) and discover how it can revolutionize the creation of stateless streaming pipelines within a Kafka (Redpanda) broker. These pipelines are adept at managing low-latency, high-data-volume scenarios.
A SYSTEMATIC RISK ASSESSMENT APPROACH FOR SECURING THE SMART IRRIGATION SYSTEMSIJNSA Journal
The smart irrigation system represents an innovative approach to optimize water usage in agricultural and landscaping practices. The integration of cutting-edge technologies, including sensors, actuators, and data analysis, empowers this system to provide accurate monitoring and control of irrigation processes by leveraging real-time environmental conditions. The main objective of a smart irrigation system is to optimize water efficiency, minimize expenses, and foster the adoption of sustainable water management methods. This paper conducts a systematic risk assessment by exploring the key components/assets and their functionalities in the smart irrigation system. The crucial role of sensors in gathering data on soil moisture, weather patterns, and plant well-being is emphasized in this system. These sensors enable intelligent decision-making in irrigation scheduling and water distribution, leading to enhanced water efficiency and sustainable water management practices. Actuators enable automated control of irrigation devices, ensuring precise and targeted water delivery to plants. Additionally, the paper addresses the potential threat and vulnerabilities associated with smart irrigation systems. It discusses limitations of the system, such as power constraints and computational capabilities, and calculates the potential security risks. The paper suggests possible risk treatment methods for effective secure system operation. In conclusion, the paper emphasizes the significant benefits of implementing smart irrigation systems, including improved water conservation, increased crop yield, and reduced environmental impact. Additionally, based on the security analysis conducted, the paper recommends the implementation of countermeasures and security approaches to address vulnerabilities and ensure the integrity and reliability of the system. By incorporating these measures, smart irrigation technology can revolutionize water management practices in agriculture, promoting sustainability, resource efficiency, and safeguarding against potential security threats.
Introduction- e - waste – definition - sources of e-waste– hazardous substances in e-waste - effects of e-waste on environment and human health- need for e-waste management– e-waste handling rules - waste minimization techniques for managing e-waste – recycling of e-waste - disposal treatment methods of e- waste – mechanism of extraction of precious metal from leaching solution-global Scenario of E-waste – E-waste in India- case studies.
ACEP Magazine edition 4th launched on 05.06.2024Rahul
This document provides information about the third edition of the magazine "Sthapatya" published by the Association of Civil Engineers (Practicing) Aurangabad. It includes messages from current and past presidents of ACEP, memories and photos from past ACEP events, information on life time achievement awards given by ACEP, and a technical article on concrete maintenance, repairs and strengthening. The document highlights activities of ACEP and provides a technical educational article for members.
1. Test Report No. F690501/LF-CTSAYSA11-05703 Issued Date : MAY 04, 2011 Page 1 of 4
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents,
subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this
document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its
Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior
written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law.
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 180 days only.
F052 Version3 SGS Testing Korea Co.,Ltd. 322, The O valley, 555-9, Hogye-dong, Dongan-gu, Anyang-si, Gyeonggi-do, Korea 431-080
t +82 (0)31 4608 000 f +82 (0)31 4608 059 http://www.sgslab.co.kr,www.kr.sgs.com/greenlab
Member of the SGS Group (Société Générale de Surveillance)
To: I&S
136-1 HOJUK-RI, OKSANMYEON,
CHEONGWONGUN,
CHUNGBUK, KOREA
The following merchandise was (were) submitted and identified by the client as: -
SAMPLE DESCRIPTION : BABYCARE BABY PLAY MAT
DETAILS OF SAMPLE : Play mat
COLOR : -
STYLE NO./ITEM NO. : -
ORDER NO. : -
BUYER NAME : -
COUNTRY OF ORIGIN : South Korea
COUNTRY OF DESTINATION : -
LABELED AGE GRADING : None
REQUESTED AGE GRADING : None
TESTED AGE GRADING : All ages
SAMPLE RECEIVING DATE : APR. 27, 2011
TESTING PERIOD : APR. 28, 2011 TO MAY. 04, 2011
TEST PERFORMED : SGS Korea tested the sample(s) selected by applicant with following result.
TEST RESULTS : For further details, please refer to following page.
RESULT SUMMARY :
TEST REQUESTED Result
For compliance with the International Standard Safety of Toys : -
- ISO 8124-1:2009 – Mechanical and Physical Properties PASS
- ISO 8124-1:2009 – Mechanical and Physical Properties – Annex B
(this annex is for information and guideline only)
PASS
- ISO 8124-2:2007 – Flammability PASS
- ISO 8124-3:1997 – Migration of Certain Elements PASS
******** For further details, please refer to the following page(s). ********
Minok Lee / Testing Person
SGS Testing Korea Co., Ltd.
Tommy Oh / Technical Manager
2. Test Report No. F690501/LF-CTSAYSA11-05703 Issued Date : MAY 04, 2011 Page 2 of 4
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents,
subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this
document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its
Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior
written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law.
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 180 days only.
F052 Version3 SGS Testing Korea Co.,Ltd. 322, The O valley, 555-9, Hogye-dong, Dongan-gu, Anyang-si, Gyeonggi-do, Korea 431-080
t +82 (0)31 4608 000 f +82 (0)31 4608 059 http://www.sgslab.co.kr,www.kr.sgs.com/greenlab
Member of the SGS Group (Société Générale de Surveillance)
SAMPLE DESCRIPTION: BABYCARE BABY PLAY MAT
Results :
- ISO 8124-1:2009
As specified in ISO 8124.1:2009 International Standard Safety of toys Part 1: Safety aspects related to mechanical and
physical properties
Clause Description Result
4 Requirements -
4.1 Normal use Pass
4.2 Reasonably foreseeable abuse Pass
4.3 Material Pass
4.3.1 Material quality (Visual examination) Pass
4.4 Small parts -
4.4.1 For children under 36 months Pass
4.6 Edges -
4.6.4 Edges on molded toys Pass
4.7 Points -
4.7.1 Accessible sharp points Pass
4.10 Plastic film or plastic bags in packaging and toys Pass
5 Test methods
5.24 Reasonably foreseeable abuse tests
5.24.2 Drop test Pass
5.24.5 Torque test Pass
5.24.6 Tension test Pass
5.24.6.1 General Pass
5.24.7 Compression test Pass
Annex B Safety-labelling guidelines and manufacturer’s markings
(this annex is for information and guideline only)
-
B.2.2 Age grading Pass
B.4 Manufacturer’s markings N/A (See Remark*)
Remark* : A principal component of the toy, the packaging, a label or a leaflet accompanying the toy shou
ld be marked with the name and address of the manufacturer or the distributor, or with a trade
mark and/or mark which clearly identifies the manufacturer / distributor. All these markings shoul
d be visible and easily legible by the consumer and should resist normal use conditions
- ISO 8124-2:2007
As specified in ISO 8124-2:2007 International Standard Safety of toys Part 2: Flammability
Clause Description Result
4.1 General requirements Pass
Remark : Only applicable clauses were shown.
3. Test Report No. F690501/LF-CTSAYSA11-05703 Issued Date : MAY 04, 2011 Page 3 of 4
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents,
subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this
document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its
Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior
written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law.
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 180 days only.
F052 Version3 SGS Testing Korea Co.,Ltd. 322, The O valley, 555-9, Hogye-dong, Dongan-gu, Anyang-si, Gyeonggi-do, Korea 431-080
t +82 (0)31 4608 000 f +82 (0)31 4608 059 http://www.sgslab.co.kr,www.kr.sgs.com/greenlab
Member of the SGS Group (Société Générale de Surveillance)
SAMPLE DESCRIPTION: BABYCARE BABY PLAY MAT
Results :
- ISO 8124-3:1997
As specified in ISO 8124-2:1997 International Standard Safety of toys Part 3 : Migration of certain element were
performed by Atomic Absorption or Inductively Coupled Argon Plasma Spectrometry.
Results (Unit : mg/kg)
Element Lead
(Pb)
Antimony
(Sb)
Arsenic
(As)
Barium
(Ba)
Cadmium
(Cd)
Chromium
(Cr)
Mercury
(Hg)
Selenium
(Se)
Limit 90 60 25 1000 75 60 60 500
MDL 5 5 2.5 10 5 2.5 2.5 10
1 N. D. N. D. N. D. N. D. N. D. N. D. N. D. N. D.
2 N. D. N. D. N. D. N. D. N. D. N. D. N. D. N. D.
3 N. D. N. D. N. D. N. D. N. D. N. D. N. D. N. D.
4 N. D. N. D. N. D. N. D. N. D. N. D. N. D. N. D.
5 N. D. N. D. N. D. N. D. N. D. N. D. N. D. N. D.
6 N. D. N. D. N. D. N. D. N. D. N. D. N. D. N. D.
7 N. D. N. D. N. D. N. D. N. D. N. D. N. D. N. D.
Description :
1. Mat (Red) 2. Mat (Orange)
3. Mat (Yellow) 4. Mat (Yellow green)
5. Mat (Blue) 6. Mat (Purple)
7. Mat (White)
Note:(1) N. D. = Not detected (< MDL)
(2) MDL = Method Detection Limit
(3) Results shown are of the adjusted analytical result.
(4) Only applicable clauses were shown.
4. Test Report No. F690501/LF-CTSAYSA11-05703 Issued Date : MAY 04, 2011 Page 4 of 4
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents,
subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this
document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its
Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior
written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law.
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 180 days only.
F052 Version3 SGS Testing Korea Co.,Ltd. 322, The O valley, 555-9, Hogye-dong, Dongan-gu, Anyang-si, Gyeonggi-do, Korea 431-080
t +82 (0)31 4608 000 f +82 (0)31 4608 059 http://www.sgslab.co.kr,www.kr.sgs.com/greenlab
Member of the SGS Group (Société Générale de Surveillance)
Picture of Sample as Received :
*** End of Report ***