engine
•Download as PPTX, PDF•
1 like•289 views
This document summarizes and compares two-stroke and four-stroke engines. It explains that two-stroke engines complete the combustion cycle in one crankshaft revolution while four-stroke engines take four strokes. Two-stroke engines are lighter and cheaper to make but are less efficient and more polluting. Four-stroke engines are heavier but run more efficiently and produce less pollution.
Report
Share
Report
Share
Recommended
Rotary Engines
This document compares piston engines and rotary engines. It discusses their design differences, performance, fuel consumption, and emissions. While rotary engines can provide good performance in compact designs, they typically consume more fuel than piston engines due to their combustion chamber shape and lower compression ratio. Rotary engines also emit more carbon monoxide and unburnt hydrocarbons, making them difficult to regulate under emission standards. Therefore, the document concludes that rotary engines are best suited for applications requiring high performance or a lightweight design, but are less optimal for fuel efficiency or meeting emission regulations compared to piston engines.
Wankel engine
The Wankel engine uses an eccentric rotary design instead of pistons, where the four-stroke cycle occurs inside an oval housing and triangle-shaped rotor. It functions as a variable-volume progressing-cavity system with three cavities repeating the cycle. Wankel engines are lighter, simpler, and have fewer moving parts than equivalent piston engines. They provide high reliability, smooth power delivery, and a high power-to-weight ratio, but consume more fuel and produce more unburnt hydrocarbons than four-stroke engines. Wankel engines are used in cars, motorcycles, and aircraft for their light weight, small size, and durability in all weather. Mazda has designed some of the best Wankel
Wankel engine
The document summarizes the Wankel rotary engine. It describes the main parts of the engine including the rotor, housing, eccentric shaft, and apex seal. It explains the four-stroke working principle of intake, compression, power, and exhaust. The Wankel engine offers benefits like simplicity and high power but has disadvantages such as oil leakage and high fuel consumption. Applications include use in automotive racing, motorcycles, and aircraft.
Wankel engine
The document discusses the Wankel rotary engine, including:
- Its invention in 1954 by German engineer Felix Wankel and use in cars like the Mazda RX-8.
- How it works using a spinning rotor and three chambers instead of pistons, making it lighter and smoother.
- The challenges in designing it, such as getting measurements correct, preventing interference, and assembling the complex parts.
1 wankel engine assaignment
The document summarizes the Wankel rotary combustion engine. It describes the engine's design which uses an eccentric rotary motion rather than reciprocating pistons. This allows for advantages like simplicity, compactness, and high power-to-weight ratio. The engine uses three rotor tips moving inside an oval housing to produce three power pulses per revolution. It operates on a four-stroke cycle like a piston engine. The Wankel engine has fewer moving parts than piston engines and no valves, allowing it to run more smoothly with less vibration at high RPMs. It can achieve high performance at high speeds due to lower friction and longer intake/exhaust strokes without valves restricting airflow.
Wankel
The Wankel engine is a type of internal combustion engine that uses a rotary design instead of pistons. It was developed in 1951 by Felix Wankel and uses a four-stroke combustion cycle. The key components are a triangular rotor that rotates inside an oval-shaped housing, with the rotor acting like a piston in a traditional engine. The rotor spins on an eccentric output shaft, turning three times for every one revolution to power the vehicle. Benefits include simplicity, high power-to-weight ratio, and smooth operation, though fuel efficiency is reduced compared to piston engines. It has seen limited automotive use primarily in Mazda vehicles.
Wankle rotary engine by mrityunjaya chauhan
The document discusses the Wankel rotary engine, including its history, advantages, disadvantages, and applications. It was designed by Felix Wankel in the 1920s and primarily manufactured by Mazda. Key advantages include high power-to-weight ratio, small size, and ability to reach high RPMs with little vibration. Main disadvantages are lower fuel efficiency than piston engines and difficult emissions control. Applications include automobiles, motorcycles, aircraft, range extenders, and personal watercraft.
Wankel engine
The Wankel engine uses an eccentric rotary design where the four strokes of a piston engine occur in the space between a three-sided rotor and a housing, rather than using pistons. It delivers advantages like simplicity, compactness, and high power-to-weight ratio over piston engines. Early prototypes were developed in the 1950s, and companies have since licensed the design and improved it. While it has better power density than pistons, Wankel engines face challenges with sealing and emissions that have limited their widespread adoption.
Recommended
Rotary Engines
This document compares piston engines and rotary engines. It discusses their design differences, performance, fuel consumption, and emissions. While rotary engines can provide good performance in compact designs, they typically consume more fuel than piston engines due to their combustion chamber shape and lower compression ratio. Rotary engines also emit more carbon monoxide and unburnt hydrocarbons, making them difficult to regulate under emission standards. Therefore, the document concludes that rotary engines are best suited for applications requiring high performance or a lightweight design, but are less optimal for fuel efficiency or meeting emission regulations compared to piston engines.
Wankel engine
The Wankel engine uses an eccentric rotary design instead of pistons, where the four-stroke cycle occurs inside an oval housing and triangle-shaped rotor. It functions as a variable-volume progressing-cavity system with three cavities repeating the cycle. Wankel engines are lighter, simpler, and have fewer moving parts than equivalent piston engines. They provide high reliability, smooth power delivery, and a high power-to-weight ratio, but consume more fuel and produce more unburnt hydrocarbons than four-stroke engines. Wankel engines are used in cars, motorcycles, and aircraft for their light weight, small size, and durability in all weather. Mazda has designed some of the best Wankel
Wankel engine
The document summarizes the Wankel rotary engine. It describes the main parts of the engine including the rotor, housing, eccentric shaft, and apex seal. It explains the four-stroke working principle of intake, compression, power, and exhaust. The Wankel engine offers benefits like simplicity and high power but has disadvantages such as oil leakage and high fuel consumption. Applications include use in automotive racing, motorcycles, and aircraft.
Wankel engine
The document discusses the Wankel rotary engine, including:
- Its invention in 1954 by German engineer Felix Wankel and use in cars like the Mazda RX-8.
- How it works using a spinning rotor and three chambers instead of pistons, making it lighter and smoother.
- The challenges in designing it, such as getting measurements correct, preventing interference, and assembling the complex parts.
1 wankel engine assaignment
The document summarizes the Wankel rotary combustion engine. It describes the engine's design which uses an eccentric rotary motion rather than reciprocating pistons. This allows for advantages like simplicity, compactness, and high power-to-weight ratio. The engine uses three rotor tips moving inside an oval housing to produce three power pulses per revolution. It operates on a four-stroke cycle like a piston engine. The Wankel engine has fewer moving parts than piston engines and no valves, allowing it to run more smoothly with less vibration at high RPMs. It can achieve high performance at high speeds due to lower friction and longer intake/exhaust strokes without valves restricting airflow.
Wankel
The Wankel engine is a type of internal combustion engine that uses a rotary design instead of pistons. It was developed in 1951 by Felix Wankel and uses a four-stroke combustion cycle. The key components are a triangular rotor that rotates inside an oval-shaped housing, with the rotor acting like a piston in a traditional engine. The rotor spins on an eccentric output shaft, turning three times for every one revolution to power the vehicle. Benefits include simplicity, high power-to-weight ratio, and smooth operation, though fuel efficiency is reduced compared to piston engines. It has seen limited automotive use primarily in Mazda vehicles.
Wankle rotary engine by mrityunjaya chauhan
The document discusses the Wankel rotary engine, including its history, advantages, disadvantages, and applications. It was designed by Felix Wankel in the 1920s and primarily manufactured by Mazda. Key advantages include high power-to-weight ratio, small size, and ability to reach high RPMs with little vibration. Main disadvantages are lower fuel efficiency than piston engines and difficult emissions control. Applications include automobiles, motorcycles, aircraft, range extenders, and personal watercraft.
Wankel engine
The Wankel engine uses an eccentric rotary design where the four strokes of a piston engine occur in the space between a three-sided rotor and a housing, rather than using pistons. It delivers advantages like simplicity, compactness, and high power-to-weight ratio over piston engines. Early prototypes were developed in the 1950s, and companies have since licensed the design and improved it. While it has better power density than pistons, Wankel engines face challenges with sealing and emissions that have limited their widespread adoption.
Two stroke engines
this ppt explains the complete working ,parts and all process in 2 stroke engine .for futher details watch videos in youtube.
for engineering students please refer foreign author book to develope knowledge .from this 11 slides a complete engine is explained
Rotary Engines
The document summarizes the key aspects of a Wankel rotary engine. It describes how a rotary engine works differently than a piston engine by having each step of the combustion process occur in a dedicated section of the oval-shaped housing as the rotor continuously rotates. It also notes that rotary engines have fewer moving parts, provide smoother power delivery, and have parts that move more slowly compared to piston engines. However, rotary engines can be more difficult to design to meet emissions regulations and typically have lower thermodynamic efficiency.
Rotary wankel engine
This lab report discusses the rotary Wankel engine. It provides details on the objective to study the rotary Wankel engine. It describes the basic working principle of the rotary Wankel engine, including its four strokes of intake, compression, ignition, and exhaust that occur around an oval shape rather than a piston. It discusses the design parameters, types, parts, cycle, and concludes that the rotary Wankel engine is better than an Otto engine and is widely used in automobiles.
2stroke
The document describes the four stages of the combustion cycle in a four-stroke engine: intake, compression, power, and exhaust. During intake, the piston moves downward and draws in the fuel-air mixture. In compression, the piston rises and compresses the mixture. At top of compression, the spark plug ignites the fuel. During power, the burning fuel expands and drives the piston downward. In exhaust, the exhaust valve opens and the spent gases are driven out.
Quasi Turbine Engine
The Quasiturbine engine was developed as an improvement on the standard Wankel or rotary engine. Unlike piston or standard rotary engines, the Quasiturbine's four-element rotor and carriages allow it to withstand the high pressures needed for photo-detonation combustion. This makes the Quasiturbine more efficient than piston or standard rotary engines. The Quasiturbine engine arranges the four strokes of combustion sequentially around an oval housing without needing a crankshaft. This produces power with each revolution rather than every other revolution as in piston engines. While still in development, the Quasiturbine engine aims to be simpler and more efficient than conventional engines.
Difference between 4-stroke Petrol Engine and 4-stroke Diesel Engine
Diesel engines and petrol engines have several key differences. Diesel fuel is more dense and viscous than petrol fuel and has a lower self-ignition temperature. Diesel engines are heavier, larger, and more durable than petrol engines. They have higher compression ratios and thermal efficiencies up to 40%, producing more power and torque than petrol engines. While diesel engines are more fuel efficient, they are more expensive initially and have higher maintenance costs than petrol engines.
Quasi-turbine- The very efficient rotary engine in Mechanical field.
The document presents the quasi-turbine (QURBINE) as the next generation rotary engine. It summarizes that piston engines are inefficient due to intermittent combustion and many reciprocating parts. The Wankel rotary engine also has issues with sealing and emissions. The QURBINE uses a four-sided rotor in an oval housing to achieve continuous combustion via photo-detonation, resulting in higher power, zero vibration, less noise and pollution compared to piston and Wankel engines. While construction of the rotor presents challenges, the QURBINE has applications in aircraft, power tools, and vehicles due to its efficiency.
Icengines
This document discusses internal combustion engines. It defines internal combustion engines as engines that combust fuel inside the engine cylinder. It classifies internal combustion engines based on fuel type, thermodynamic cycle, number of strokes, ignition method, cooling method, engine speed, cylinder number and position. It describes the four stroke cycles of Otto and diesel engines. It compares petrol and diesel engines and two stroke and four stroke engines. It defines indicated power and mechanical, thermal, brake and relative efficiencies of internal combustion engines.
Quasi turbine
The document discusses the quasi turbine engine, a pistonless rotary engine. It has a deformable rotor made of blades hinged at the vertices that is enclosed in an oval housing. The rotor undergoes compression and expansion similar to the Wankel engine. There are two types - one without a carriage where the rotor seals directly to the housing, and one with a carriage that has ports for spark plugs, intake, and exhaust. The quasi turbine operates on the same four stroke cycle as an internal combustion engine but does not require pistons or a crankshaft. It provides advantages like simplicity, reduced vibration, higher torque at lower RPMs, and increased fuel efficiency. However, it is still in development and not yet
Engines
The document discusses different types of engines including four-stroke gasoline, two-stroke gasoline, diesel, and rotary engines. It describes the basic components of internal combustion engines including cylinders, pistons, valves, camshafts, connecting rods, and crankshafts. The document provides details on the configuration of engines such as inline, V-shaped, and flat designs as well as the function of key parts like the cylinder head, engine block, flywheel, and piston rings.
2 Stroke Engines
Two stroke engines complete the intake, compression, power, and exhaust strokes in one revolution of the crankshaft, using the crankcase as a pumping device. They are lighter and simpler than four stroke engines but are less efficient and more polluting. Common applications of two stroke engines include dirt bikes, lawnmowers, outboard engines, chain saws, jet skis, and snowmobiles.
presentation on Diseal engine
Rudolf Diesel invented the compression-ignition engine in the late 1800s in response to the low efficiencies of gasoline and steam engines at the time; the diesel engine operates using the heat of compressed air to ignite fuel injected into the cylinder, rather than a spark plug, and comes in both two-stroke and four-stroke varieties that differ in their power output, efficiency, and emissions.
Presentation1 hemm
This document provides an introduction to two stroke diesel engines. It discusses the diesel cycle combustion process where fuel is ignited by heat from compressed air. It describes the basic working of a two stroke diesel engine, which completes the intake, compression, power, and exhaust strokes in only two piston strokes per revolution. The key parts of a two stroke diesel engine are identified as the injector, piston, connecting rod, inlet port, exhaust port, and transfer port. Advantages include high engine speeds up to 3000 rpm and lighter weight, while disadvantages are a high compression ratio and higher fuel costs. Applications mentioned are in automobiles, mopeds, and generators.
Quasi turbine engine
The Saint-Hilaire family patented the Quasi turbine engine in 1996 as an improvement on the standard Wankel or rotary engine. The Quasi turbine uses a four-element rotor within a housing to divide the space into four combustion chambers. It operates on a continuous combustion principle with no vibrations or dead times. The engine aims to be compact, efficient, and able to run on multiple fuel types with high torque at low RPM.
Quasiturbine engine2
The document describes a quasiturbine engine invented in 1996 by Dr. Gilles Saint-Hilaire and three other researchers. There are two models of the quasiturbine engine: one without carriages that uses an oval housing, four-sided rotor, and inlet/exhaust ports; and one with carriages that uses wheels and blades with filler tips and traction slots. The quasiturbine engine is said to have advantages over traditional internal combustion engines like fewer vibrations, less noise, lower pollution, and more effective energy conversion. Potential applications include aviation, racing cars, pumps, and hydrogen engines.
Duke engines
This document discusses the Duke engine, which is a type of reciprocating engine with pistons arranged around an output shaft parallel to the shaft. The key advantage is the compact, cylindrical design with cylinders arranged parallel to the crank shaft. The main elements are the barrel, which refers to the cylindrical shape, and the swash plate, which translates rotating shaft motion to reciprocating piston motion. Testing has shown the Duke engine can be up to 19% lighter and 36% smaller than conventional engines while maintaining comparable performance. It can run on various fuels and has applications in vehicles, marine uses, and power generation due to its advantages of high efficiency, low vibration, and compact size.
Quasi turbine engine
The document describes the Quasi Turbine engine, a proposed pistonless rotary engine. It has a rhomboidal rotor with hinged sides that allow for increased compression and expansion ratios compared to the Wankel engine. The Quasi Turbine has fewer parts than pistons engines, is more efficient, produces high torque at low RPM, and has potential applications in aviation, power tools, vehicles and pumps due to its compact size, lack of vibration, and mechanical simplicity. The engine works through intake, compression, combustion and exhaust cycles without the use of pistons or crankshafts.
Engine Presentation
The document discusses different types of engines including flat-4, inline-4, and V-6 configurations for internal combustion engines as well as external combustion steam engines and Stirling engines. It also mentions 2-stroke gasoline engines and describes the 4-stroke engine process.
Forced induction ms office 2013 format
Hi, guys this FORCED INDUCTION office 2013 format. If you want to present your presentation with some videos this is the one. But this presentation will work only with MS OFFICE 2013 . If you want to present your presentation in OFFICE 2007 I already provided it. Hope you like it.
thank you
Quasi Turbine
The document summarizes a quasi turbine engine, which is a rotary engine invented in 1996 that has a 4-sided articulated rotor. It produces strong torque at low RPM without vibrations. The objectives are to combine the compressor and turbine into one unit for low noise and perfect balance. There are two models - one without carriages that has an oval housing and one with carriages that uses wheels and traction slots. It has advantages over traditional engines like fewer moving parts, less pollution, and better torque continuity. Potential applications include aviation, racing cars, and hydrogen engines.
Informe sectorial Metal 2014 de CESCE
El documento resume las industrias del metal, siderurgia, fabricación de automóviles, distribución de automóviles, industria ferroviaria, industria naval, industria aeroespacial y aeronáutica en España. China es el principal productor mundial de acero y la industria siderúrgica representa el 4.6% del PIB español. La industria automovilística supone el 10% del PIB español y exporta el 86.9% de su producción. Las industrias ferroviaria, naval, aeroesp
19 06-14. acta pleno nº 12
Este documento presenta el acta de una sesión extraordinaria del pleno del Ayuntamiento de Novelda. En el orden del día se discute la modificación de las condiciones financieras de los préstamos obtenidos por el Ayuntamiento a través de un mecanismo de financiación para pagar a proveedores. Tras el debate, los diferentes grupos políticos apoyan la propuesta al suponer un ahorro de 1 millón de euros, aunque piden una reforma de la financiación local. Finalmente, el pleno aprueba adherirse a las nuevas condiciones
More Related Content
What's hot
Two stroke engines
this ppt explains the complete working ,parts and all process in 2 stroke engine .for futher details watch videos in youtube.
for engineering students please refer foreign author book to develope knowledge .from this 11 slides a complete engine is explained
Rotary Engines
The document summarizes the key aspects of a Wankel rotary engine. It describes how a rotary engine works differently than a piston engine by having each step of the combustion process occur in a dedicated section of the oval-shaped housing as the rotor continuously rotates. It also notes that rotary engines have fewer moving parts, provide smoother power delivery, and have parts that move more slowly compared to piston engines. However, rotary engines can be more difficult to design to meet emissions regulations and typically have lower thermodynamic efficiency.
Rotary wankel engine
This lab report discusses the rotary Wankel engine. It provides details on the objective to study the rotary Wankel engine. It describes the basic working principle of the rotary Wankel engine, including its four strokes of intake, compression, ignition, and exhaust that occur around an oval shape rather than a piston. It discusses the design parameters, types, parts, cycle, and concludes that the rotary Wankel engine is better than an Otto engine and is widely used in automobiles.
2stroke
The document describes the four stages of the combustion cycle in a four-stroke engine: intake, compression, power, and exhaust. During intake, the piston moves downward and draws in the fuel-air mixture. In compression, the piston rises and compresses the mixture. At top of compression, the spark plug ignites the fuel. During power, the burning fuel expands and drives the piston downward. In exhaust, the exhaust valve opens and the spent gases are driven out.
Quasi Turbine Engine
The Quasiturbine engine was developed as an improvement on the standard Wankel or rotary engine. Unlike piston or standard rotary engines, the Quasiturbine's four-element rotor and carriages allow it to withstand the high pressures needed for photo-detonation combustion. This makes the Quasiturbine more efficient than piston or standard rotary engines. The Quasiturbine engine arranges the four strokes of combustion sequentially around an oval housing without needing a crankshaft. This produces power with each revolution rather than every other revolution as in piston engines. While still in development, the Quasiturbine engine aims to be simpler and more efficient than conventional engines.
Difference between 4-stroke Petrol Engine and 4-stroke Diesel Engine
Diesel engines and petrol engines have several key differences. Diesel fuel is more dense and viscous than petrol fuel and has a lower self-ignition temperature. Diesel engines are heavier, larger, and more durable than petrol engines. They have higher compression ratios and thermal efficiencies up to 40%, producing more power and torque than petrol engines. While diesel engines are more fuel efficient, they are more expensive initially and have higher maintenance costs than petrol engines.
Quasi-turbine- The very efficient rotary engine in Mechanical field.
The document presents the quasi-turbine (QURBINE) as the next generation rotary engine. It summarizes that piston engines are inefficient due to intermittent combustion and many reciprocating parts. The Wankel rotary engine also has issues with sealing and emissions. The QURBINE uses a four-sided rotor in an oval housing to achieve continuous combustion via photo-detonation, resulting in higher power, zero vibration, less noise and pollution compared to piston and Wankel engines. While construction of the rotor presents challenges, the QURBINE has applications in aircraft, power tools, and vehicles due to its efficiency.
Icengines
This document discusses internal combustion engines. It defines internal combustion engines as engines that combust fuel inside the engine cylinder. It classifies internal combustion engines based on fuel type, thermodynamic cycle, number of strokes, ignition method, cooling method, engine speed, cylinder number and position. It describes the four stroke cycles of Otto and diesel engines. It compares petrol and diesel engines and two stroke and four stroke engines. It defines indicated power and mechanical, thermal, brake and relative efficiencies of internal combustion engines.
Quasi turbine
The document discusses the quasi turbine engine, a pistonless rotary engine. It has a deformable rotor made of blades hinged at the vertices that is enclosed in an oval housing. The rotor undergoes compression and expansion similar to the Wankel engine. There are two types - one without a carriage where the rotor seals directly to the housing, and one with a carriage that has ports for spark plugs, intake, and exhaust. The quasi turbine operates on the same four stroke cycle as an internal combustion engine but does not require pistons or a crankshaft. It provides advantages like simplicity, reduced vibration, higher torque at lower RPMs, and increased fuel efficiency. However, it is still in development and not yet
Engines
The document discusses different types of engines including four-stroke gasoline, two-stroke gasoline, diesel, and rotary engines. It describes the basic components of internal combustion engines including cylinders, pistons, valves, camshafts, connecting rods, and crankshafts. The document provides details on the configuration of engines such as inline, V-shaped, and flat designs as well as the function of key parts like the cylinder head, engine block, flywheel, and piston rings.
2 Stroke Engines
Two stroke engines complete the intake, compression, power, and exhaust strokes in one revolution of the crankshaft, using the crankcase as a pumping device. They are lighter and simpler than four stroke engines but are less efficient and more polluting. Common applications of two stroke engines include dirt bikes, lawnmowers, outboard engines, chain saws, jet skis, and snowmobiles.
presentation on Diseal engine
Rudolf Diesel invented the compression-ignition engine in the late 1800s in response to the low efficiencies of gasoline and steam engines at the time; the diesel engine operates using the heat of compressed air to ignite fuel injected into the cylinder, rather than a spark plug, and comes in both two-stroke and four-stroke varieties that differ in their power output, efficiency, and emissions.
Presentation1 hemm
This document provides an introduction to two stroke diesel engines. It discusses the diesel cycle combustion process where fuel is ignited by heat from compressed air. It describes the basic working of a two stroke diesel engine, which completes the intake, compression, power, and exhaust strokes in only two piston strokes per revolution. The key parts of a two stroke diesel engine are identified as the injector, piston, connecting rod, inlet port, exhaust port, and transfer port. Advantages include high engine speeds up to 3000 rpm and lighter weight, while disadvantages are a high compression ratio and higher fuel costs. Applications mentioned are in automobiles, mopeds, and generators.
Quasi turbine engine
The Saint-Hilaire family patented the Quasi turbine engine in 1996 as an improvement on the standard Wankel or rotary engine. The Quasi turbine uses a four-element rotor within a housing to divide the space into four combustion chambers. It operates on a continuous combustion principle with no vibrations or dead times. The engine aims to be compact, efficient, and able to run on multiple fuel types with high torque at low RPM.
Quasiturbine engine2
The document describes a quasiturbine engine invented in 1996 by Dr. Gilles Saint-Hilaire and three other researchers. There are two models of the quasiturbine engine: one without carriages that uses an oval housing, four-sided rotor, and inlet/exhaust ports; and one with carriages that uses wheels and blades with filler tips and traction slots. The quasiturbine engine is said to have advantages over traditional internal combustion engines like fewer vibrations, less noise, lower pollution, and more effective energy conversion. Potential applications include aviation, racing cars, pumps, and hydrogen engines.
Duke engines
This document discusses the Duke engine, which is a type of reciprocating engine with pistons arranged around an output shaft parallel to the shaft. The key advantage is the compact, cylindrical design with cylinders arranged parallel to the crank shaft. The main elements are the barrel, which refers to the cylindrical shape, and the swash plate, which translates rotating shaft motion to reciprocating piston motion. Testing has shown the Duke engine can be up to 19% lighter and 36% smaller than conventional engines while maintaining comparable performance. It can run on various fuels and has applications in vehicles, marine uses, and power generation due to its advantages of high efficiency, low vibration, and compact size.
Quasi turbine engine
The document describes the Quasi Turbine engine, a proposed pistonless rotary engine. It has a rhomboidal rotor with hinged sides that allow for increased compression and expansion ratios compared to the Wankel engine. The Quasi Turbine has fewer parts than pistons engines, is more efficient, produces high torque at low RPM, and has potential applications in aviation, power tools, vehicles and pumps due to its compact size, lack of vibration, and mechanical simplicity. The engine works through intake, compression, combustion and exhaust cycles without the use of pistons or crankshafts.
Engine Presentation
The document discusses different types of engines including flat-4, inline-4, and V-6 configurations for internal combustion engines as well as external combustion steam engines and Stirling engines. It also mentions 2-stroke gasoline engines and describes the 4-stroke engine process.
Forced induction ms office 2013 format
Hi, guys this FORCED INDUCTION office 2013 format. If you want to present your presentation with some videos this is the one. But this presentation will work only with MS OFFICE 2013 . If you want to present your presentation in OFFICE 2007 I already provided it. Hope you like it.
thank you
Quasi Turbine
The document summarizes a quasi turbine engine, which is a rotary engine invented in 1996 that has a 4-sided articulated rotor. It produces strong torque at low RPM without vibrations. The objectives are to combine the compressor and turbine into one unit for low noise and perfect balance. There are two models - one without carriages that has an oval housing and one with carriages that uses wheels and traction slots. It has advantages over traditional engines like fewer moving parts, less pollution, and better torque continuity. Potential applications include aviation, racing cars, and hydrogen engines.
What's hot (20)
Difference between 4-stroke Petrol Engine and 4-stroke Diesel Engine
Difference between 4-stroke Petrol Engine and 4-stroke Diesel Engine
Quasi-turbine- The very efficient rotary engine in Mechanical field.
Quasi-turbine- The very efficient rotary engine in Mechanical field.
Viewers also liked
Informe sectorial Metal 2014 de CESCE
El documento resume las industrias del metal, siderurgia, fabricación de automóviles, distribución de automóviles, industria ferroviaria, industria naval, industria aeroespacial y aeronáutica en España. China es el principal productor mundial de acero y la industria siderúrgica representa el 4.6% del PIB español. La industria automovilística supone el 10% del PIB español y exporta el 86.9% de su producción. Las industrias ferroviaria, naval, aeroesp
19 06-14. acta pleno nº 12
Este documento presenta el acta de una sesión extraordinaria del pleno del Ayuntamiento de Novelda. En el orden del día se discute la modificación de las condiciones financieras de los préstamos obtenidos por el Ayuntamiento a través de un mecanismo de financiación para pagar a proveedores. Tras el debate, los diferentes grupos políticos apoyan la propuesta al suponer un ahorro de 1 millón de euros, aunque piden una reforma de la financiación local. Finalmente, el pleno aprueba adherirse a las nuevas condiciones
Hidróxido
Los hidróxidos son compuestos químicos formados por un metal y uno o más iones hidroxilo en lugar de oxígeno. Las disoluciones acuosas de los hidróxidos tienen carácter básico ya que se disocian en cationes metálicos e iones hidroxilo. Los hidróxidos se clasifican como básicos, anfóteros o ácidos dependiendo de cómo reaccionan con ácidos y bases.
Education is an illusion if it only disseminates information - A university-w...
Our presentation from ALT-C about how we have struggled to find the third way between individual and institutional technology strategy
TJ-Rondônia mantém condenação de sindicalista que achacou empresa
Este documento descreve um caso de extorsão ocorrido em 2012. Um homem constrangeu funcionários de uma empresa sob grave ameaça para obter dinheiro. Ele foi denunciado e levado a julgamento. O juiz rejeitou o argumento da defesa de que o crime era atípico devido à preparação do flagrante e condenou o réu com base nas provas apresentadas.
Desarrollo sustentable
El documento habla sobre el concepto de desarrollo sustentable. Explica que la sustentabilidad se refiere al equilibrio entre las especies y los recursos del entorno para satisfacer las necesidades actuales sin comprometer las futuras. Luego describe cinco principios de sustentabilidad como el precautorio, la interdependencia, la eficiencia y el equilibrio. Finalmente discute tres dimensiones de sustentabilidad como la ecológica, social y económica y la importancia de una visión sistémica para enfocar el cambio hacia la sustentabilidad en
Cyber Warfare Systems
A game in which the player has to protect a given network of servers which is being attacked by a virus.
Features:
- Designing AI for virus so that it can attack high priority nodes
- Addition of random edges in a graph
- Disable a node and all its edges
- Enable IPSs / firewall on nodes to prevent it from being attacked
Poster anabell parque palacios
El documento discute las ventajas y desventajas del ámbito laboral, incluyendo mejorar la eficiencia como una ventaja y el riesgo de robo de información como una desventaja. También define la competitividad como la capacidad de satisfacer a los consumidores. Además, menciona que las entidades de negocios internacionales apoyan a los profesionales y que el despacho aduanero verifica la exactitud de los datos declarados por los importadores.
Sistemas de informacion y las tics
Los sistemas de información están constituidos por personas, datos, actividades y recursos que usan tecnología para apoyar los objetivos de una organización. El desarrollo de sistemas de información es complejo y requiere una reingeniería de procesos en lugar de enfocarse solo en la tecnología o usuarios. Un sistema de información efectivo está centrado en los objetivos de negocio más que en la tecnología y su gestión ha evolucionado para requerir conocimiento del negocio y una perspectiva estratégica.
Clasificación de los elementos químicos
Dimitri Mendeleev y Julio Meyer ordenaron de forma independiente los elementos químicos basándose en sus propiedades físicas y químicas, estableciendo que estas propiedades son funciones periódicas de sus pesos atómicos. Mendeleev predijo las propiedades de 10 elementos no descubiertos en ese momento. Posteriormente, Henry Moseley propuso que el número atómico, y no el peso atómico, determina el orden de los elementos en la tabla periódica. La clasificación más reciente es la cuántica,
E commerce
E-commerce refers to the buying and selling of goods and services over electronic systems. There are three main types of e-commerce: business-to-business (B2B) where companies sell to other companies, business-to-consumer (B2C) where companies sell directly to individual consumers, and consumer-to-consumer (C2C) where individuals sell to other individuals. Examples of each type are provided.
okoroafor catem fidelis cv5
This document contains personal and employment details of Okoroafor Catem Uche, including contact information, education history, skills, certifications, and professional experience as a pipefitter working on various oil and gas projects in Nigeria since 2006. Key roles held include Fitter, Fitter Leader Man, Fitter Foreman 2, and Fitter General Foreman. Projects have been with companies such as RIVOC, Addax PDNL, SNIG Nig. Ltd, Brown Rock Nig. Ltd, and Kaztec Engineering Ltd.
Viewers also liked (13)
Education is an illusion if it only disseminates information - A university-w...
Education is an illusion if it only disseminates information - A university-w...
TJ-Rondônia mantém condenação de sindicalista que achacou empresa
TJ-Rondônia mantém condenação de sindicalista que achacou empresa
Similar to engine
Four stroke engine
The document discusses the four-stroke and two-stroke internal combustion engine cycles. The four-stroke cycle involves intake, compression, power, and exhaust strokes in two revolutions, while the two-stroke cycle completes these strokes in one revolution. Two-stroke engines are lighter, more powerful, and less expensive but are less efficient and more polluting than four-stroke engines. Four-stroke engines are more complicated with more parts but are more efficient, last longer, and pollute less. Internal combustion engines are widely used in vehicles, locomotives, aircraft, marine applications, lawn equipment, and industrial stationary equipment.
Basic of engine
introduction
engine terminology
otto and diesel cycle
four stroke and two stroke
efficiency
fuel calculation
marine ic engine
Introduction to i c engine
The document provides an overview of internal combustion engines. It discusses the classification of I.C. engines based on fuel type, thermodynamic cycle, number of strokes, ignition method, cooling method, and cylinder configuration. It also describes the basic components and workings of 4-stroke petrol and diesel engines, as well as 2-stroke engines. The key differences between petrol and diesel engines, and between 2-stroke and 4-stroke engines are outlined.
presention-150806044916-lva1-app6891.pdf
The document provides an overview of internal combustion engines, including:
- Common engine classifications such as two-stroke vs four-stroke engines and differences between petrol and diesel engines.
- Explanations of engine terminology like compression ratio, swept volume, indicated power, brake power, and thermal efficiency.
- Descriptions of the Otto and diesel thermodynamic cycles that spark ignition and compression ignition engines are based on.
- Comparisons of key engine parameters and how they relate to performance metrics like power, torque, and fuel consumption.
2-stroke cycle gasoline engine
1. The document discusses the two-stroke cycle gasoline engine, describing its basic parts and principle of operation. It has several key advantages over the four-stroke engine, including higher power density and simpler design.
2. The basic parts are the piston, cylinder block, crankshaft, connecting rod, flywheel, spark plug, inlet port, exhaust port, and transfer port. Each downward piston stroke is a power stroke, and each upward stroke is a compression stroke.
3. It intakes and exhausts on the same stroke, achieving two cycles per revolution compared to one cycle per two revolutions for a four-stroke. However, its scavenging is less efficient, resulting in lower thermal
Duke axial engine
The Duke engine is a four-stroke axial reciprocating engine where the cylinders are aligned with the central crankshaft. It is lightweight, compact, valveless, and vibration-free with high power density. The Duke engine can run on various fuels including gasoline, ethanol, diesel, and kerosene. It is well-suited for aerospace, marine, and light aircraft applications due to its small size, low weight and vibration, and ability to run on multiple fuels.
ET Presentation Petrol Engine.pptx
This document provides an overview of petrol engines, including their basic operation and types. It begins by defining an engine as a machine that converts heat energy into mechanical energy. It then describes a petrol engine as an internal combustion engine that uses spark ignition and gasoline as fuel. The document explains that petrol engines operate based on the Otto cycle. It notes there are two main types of petrol engines: 4-stroke and 2-stroke. The 4-stroke petrol engine is then described in more detail, outlining the intake, compression, power, and exhaust strokes in its cycle. Key components like the piston, valves, and spark plug are also identified. Advantages and disadvantages of petrol engines are listed at the end.
6 stroke engine
This document describes two 6-stroke engine designs that aim to improve fuel efficiency over traditional 4-stroke engines. The first is Bruce Crower's 6-stroke engine, which captures wasted heat from the 4-stroke cycle to power an additional steam stroke. The second is the Beare dual opposed piston 6-stroke engine, which replaces the cylinder head with an overhead piston arrangement, combining a 4-stroke bottom end with a 2-stroke head cycle. Both designs are analyzed against traditional 4-stroke engines and are found to increase power and torque output while improving fuel economy.
Ice d-1 to 15 fundamentals
The document compares the characteristics of four-stroke and two-stroke engines. Four-stroke engines have more moving parts, run cooler, are heavier, use separate fuel and oil, produce less power per revolution, and require less maintenance than two-stroke engines. However, two-stroke engines are smaller, lighter, more powerful per revolution, and more fuel efficient.
I.C.ENGINE PPT
The document provides an overview of internal combustion engines, including their classification, operation, and differences between engine types. It discusses four-stroke petrol and diesel engines in detail, describing the four strokes of each cycle. The key differences between petrol and diesel engines are outlined. Two-stroke engines are also summarized and compared to four-stroke engines. Various engine efficiencies are defined.
Icengine ppt
This document provides an overview of internal combustion engines. It discusses the classification of IC engines based on fuel used, thermodynamic cycle, number of strokes, ignition method, cooling method, speed, number of cylinders, and cylinder position. It describes the four-stroke cycles of Otto petrol and diesel engines. The key differences between petrol and diesel engines are outlined. The document also compares two-stroke and four-stroke engines, discussing their cycles, revolutions, power strokes, flywheels, ports/valves, lubrication, efficiencies, and applications. Indicated power, mechanical efficiency, thermal efficiency, and specific fuel consumption are defined.
Internal combustion engine
The document provides information on various types of internal combustion engines including their components, operation principles, advantages and disadvantages. It discusses key aspects of gasoline/petrol engines like 2-stroke and 4-stroke cycles and diesel engines. Other topics covered include engine materials, nomenclature, cooling methods, turbocharging and alternative rotary engines like the Wankel engine. Diagrams are included to illustrate the engine cycles and configurations.
Multi valve technology
The presentation includes the information about multi valve engine technology. The presentation include the types of multi valve engine with pictures, advantages and disadvantages.
Presentation on Petrol Engine
An engine converts heat energy from fuel into mechanical energy. A petrol/gasoline engine uses an internal combustion process where fuel is ignited by a spark plug. It has four strokes - intake, compression, power, and exhaust. In a four-stroke petrol engine, these four strokes are completed in two revolutions of the crankshaft. A two-stroke petrol engine completes the four strokes in one revolution, making it simpler but less efficient. The major components of an engine include the cylinder, piston, crankshaft, valves, connecting rod, and camshaft.
2 stroke petrol engine
A two-stroke petrol engine completes the combustion cycle in two strokes of the piston rather than four as in a four-stroke engine. In a two-stroke engine, the intake and exhaust strokes are eliminated and ports instead of valves are used, with the exhaust gases driven out by the fresh fuel charge entering near the end of the power stroke. Everything a four-stroke engine does over two revolutions, a two-stroke engine accomplishes in one crankshaft revolution. Two-stroke engines are smaller, lighter, cheaper to produce but wear out faster and are less fuel efficient than four-stroke engines due to their greater pollution output.
2 stroke petrol engine
A two-stroke petrol engine completes the combustion cycle in two strokes of the piston rather than four as in a four-stroke engine. In a two-stroke engine, the intake and exhaust strokes are eliminated and ports instead of valves are used, with the exhaust gases driven out by the fresh fuel charge entering near the end of the power stroke. Everything a four-stroke engine does over two revolutions, a two-stroke engine accomplishes in one revolution, with the fuel-air mixture entering the crankcase and being compressed and ignited directly in the cylinder. While smaller, lighter and cheaper than a four-stroke engine, two-stroke engines wear parts faster, are less fuel efficient, and more polluting.
Diesel engine
The document discusses diesel engines and how they work. It explains that diesel engines ignite fuel through heat of compressed air rather than a spark plug. It provides details on the 4-stroke diesel engine cycle including intake, compression, power, and exhaust strokes. It also describes the simpler 2-stroke engine cycle and discusses advantages and disadvantages of each.
Internal Combustion Engines - Construction and Working (All you need to know,...
The document discusses various components and systems of internal combustion engines, including:
- The crankshaft, connecting rod, camshaft, spark plug, drivetrain, turbochargers, carburetors, fuel injection systems, engine lubrication systems, rotary engines, two-stroke engines, and experimental five-stroke and six-stroke engines. It provides brief descriptions of how each component or system functions within an engine.
Two stroke diesel engin
The document discusses two-stroke diesel engines. A two-stroke diesel engine completes a power cycle in two strokes of the piston during one crankshaft revolution, in contrast to a four-stroke engine which takes four strokes. In a two-stroke diesel engine, intake and exhaust occur simultaneously. The engine has five basic events - intake, compression, ignition, power, and exhaust - all completed in two strokes, making it more compact than a four-stroke engine. Two-stroke diesel engines are commonly used in large ships and generators due to their efficiency.
Ic engines
This document provides an overview of internal combustion engines. It begins with an introduction that defines engines and heat engines. It then covers the history and classification of IC engines. The main parts of an IC engine are described along with advancements like direct fuel injection. Performance parameters and the operation of 2-stroke and 4-stroke engines are explained. Emerging technologies like digital triple spark ignition and nano engines are also discussed.
Similar to engine (20)
Internal Combustion Engines - Construction and Working (All you need to know,...
Internal Combustion Engines - Construction and Working (All you need to know,...
engine
- 1. MAKTAB KEJURUTERAAN JEFRI BOLKIAH
- 4. What is two-stroke engine? internal combustion engine that completes the process cycle in one revolution of the crankshaft. What is four-stroke engine? known as four-cycle Internal combustion engine in which the piston completes four separate strokes cycle
- 6. Spark Combustion plug chamber Piston Exhaust Reed outlet valve Fuel Crankcase intake Fuel
- 9. Spark Intake plug valve Exhaust Intake valve port Cooling Exhaust fins port Piston Connecting rod Crankcase Crankshaft
- 11. Do not have valves, simplifying their construction. Fire once every revolution. Lighter, and cost less to manufacture. Potential for about twice the power in the same size
- 12. Don't live as long Oil can be expensive. Produce more pollution. Do not use fuel efficiently, yielding fewer miles per gallon.
Editor's Notes
- Internal combustion engine in which the piston completes four separate strokes cycle which include:-Intake CompressionPower exhaust
- "Stroke" refers to the movement of the piston in the engine.2 Stroke means one stroke in each direction. A 2 stoke engine will have a compression stroke followed by an explosion of the compressed fuel.
- One compression stroke and one exhaust stoke.Distributor that supplies a spark to the cylinder only when its piston is near TDC on the fuel compression stroke.TDC (Top dead center)
- Two-stroke engines fire once every revolution. (four-stroke engines fire once every other revolution).Potential for about twice the power in the same size because there are twice as many power strokes per revolution.