Automatic trolley
•Download as DOC, PDF•
0 likes•58 views
This document describes an automatic trolley system for material handling in industries. It discusses how material handling equipment is used to move, store, and control materials throughout the manufacturing process. It then introduces an automatic trolley system that uses electric motors, a power transmission system, and sensors to carry and drop off materials autonomously on rough surfaces. The trolley system provides benefits like increased accuracy, reduced lead times, and eliminated manual labor compared to manual handling methods, though it has higher maintenance costs and risk of electronic failures.
Report
Share
Report
Share
Recommended
Automatic trolley
ECWAY TECHNOLOGIES
IEEE PROJECTS,HARDWARE & SOFTWARE DEVELOPMENTS
OUR OFFICES @ CHENNAI / TRICHY / KARUR / ERODE / MADURAI / SALEM / COIMBATORE
BANGALORE / HYDRABAD
CELL: +91 98949 17187, +91 875487 1111 / 2111 / 3111 / 4111 / 5111 / 6111 / 8111
Mail to: ecwaytechnologies@gmail.com | ecwayembedded@gmail.com
VISIT: www.ecwaytechnologies.com | www.ecwayprojects.com
(XIMB) Sustainability - Machine Tools Industry
This document discusses sustainability practices in the machine tools industry in India. It outlines key sustainability focuses in India including energy efficiency, capacity enhancement, process optimization, scrap reduction, and emission reduction. It also discusses best practices followed by companies in India like Kannametal India and initiatives by IMTMA. Sustainability practices in other parts of the world by organizations like DMG MORI, Amada, and under the European Project DESIGN-MTS are also summarized. Key challenges for the industry and the way forward in terms of sustainability are highlighted.
Proposal of industry factory
This document contains a student's project proposal for designing a cable factory in Ethiopia. The proposal discusses selecting the Kilinto Industrial Park site for its existing infrastructure and industrial zoning. Improving the country's cable industry is important to support Ethiopia's transformation and compete globally through quality service, production efficiency, and environmental standards. The project aims to provide better design solutions for ventilation, material storage, recycling, and product distribution across cities and towns.
Resume
Actively seeking a Co-op in the field of Mechanical Engineering beginning in Fall 2016 / Spring 2017.
Modelling Of E-Hara Machine
In agricultural implements - The plough tool is a very important tool to help break down the soil or control weeds. It is difficult to remove weeds by using tractors and ox in narrow spaced crops like spinach, potato, cauliflower, tomato etc. To overcome this problem, we proposed a new modern Agricultural Machine called E- HARA. It helps to remove the weeds in narrow spaced crops for small farmers in agriculture. E- HARA is to be affordable with low cost and lighter weight to carry.
link fo reports: https://bit.ly/2WA4ncd
Schools of technology+forestry and rural industries
Rovaniemi University of Applied Sciences has three campuses focused on forestry, technology, business, health care, sports, tourism and hospitality. Its strategy focuses on supporting the tourism industry through cold climate technology, services, health and wellness, and sustainable environmental management. The university has expertise in snow and ice construction, landscape management, and renewable natural resources in Northern environments. Its cold climate technology research focuses on multidisciplinary products, systems and services used in cold conditions, in cooperation with industry partners. This includes areas like Arctic testing, infrastructure, snow and ice production, and applications for winter tourism.
Unit 3 55
This document provides an overview of automated material handling systems, including automated guided vehicle systems (AGVS) and industrial robots. It describes the key components of AGVS, including different types of vehicles, guidance systems, and routing. Industrial robots are also introduced, covering their anatomy, classifications, control systems, and applications in industry. The objectives are to understand the importance of AGVS in manufacturing and the role of robots, as well as alternatives for automated material handling.
Material handling equipment from Godrej
Godrej Material Handling provides a range of material handling solutions such as electric, diesel forklifts, custom forklifts, pallets and stackers, mast lifts, scissor lifts, and industrial floor cleaning solutions. Click on the link to read more.
Recommended
Automatic trolley
ECWAY TECHNOLOGIES
IEEE PROJECTS,HARDWARE & SOFTWARE DEVELOPMENTS
OUR OFFICES @ CHENNAI / TRICHY / KARUR / ERODE / MADURAI / SALEM / COIMBATORE
BANGALORE / HYDRABAD
CELL: +91 98949 17187, +91 875487 1111 / 2111 / 3111 / 4111 / 5111 / 6111 / 8111
Mail to: ecwaytechnologies@gmail.com | ecwayembedded@gmail.com
VISIT: www.ecwaytechnologies.com | www.ecwayprojects.com
(XIMB) Sustainability - Machine Tools Industry
This document discusses sustainability practices in the machine tools industry in India. It outlines key sustainability focuses in India including energy efficiency, capacity enhancement, process optimization, scrap reduction, and emission reduction. It also discusses best practices followed by companies in India like Kannametal India and initiatives by IMTMA. Sustainability practices in other parts of the world by organizations like DMG MORI, Amada, and under the European Project DESIGN-MTS are also summarized. Key challenges for the industry and the way forward in terms of sustainability are highlighted.
Proposal of industry factory
This document contains a student's project proposal for designing a cable factory in Ethiopia. The proposal discusses selecting the Kilinto Industrial Park site for its existing infrastructure and industrial zoning. Improving the country's cable industry is important to support Ethiopia's transformation and compete globally through quality service, production efficiency, and environmental standards. The project aims to provide better design solutions for ventilation, material storage, recycling, and product distribution across cities and towns.
Resume
Actively seeking a Co-op in the field of Mechanical Engineering beginning in Fall 2016 / Spring 2017.
Modelling Of E-Hara Machine
In agricultural implements - The plough tool is a very important tool to help break down the soil or control weeds. It is difficult to remove weeds by using tractors and ox in narrow spaced crops like spinach, potato, cauliflower, tomato etc. To overcome this problem, we proposed a new modern Agricultural Machine called E- HARA. It helps to remove the weeds in narrow spaced crops for small farmers in agriculture. E- HARA is to be affordable with low cost and lighter weight to carry.
link fo reports: https://bit.ly/2WA4ncd
Schools of technology+forestry and rural industries
Rovaniemi University of Applied Sciences has three campuses focused on forestry, technology, business, health care, sports, tourism and hospitality. Its strategy focuses on supporting the tourism industry through cold climate technology, services, health and wellness, and sustainable environmental management. The university has expertise in snow and ice construction, landscape management, and renewable natural resources in Northern environments. Its cold climate technology research focuses on multidisciplinary products, systems and services used in cold conditions, in cooperation with industry partners. This includes areas like Arctic testing, infrastructure, snow and ice production, and applications for winter tourism.
Unit 3 55
This document provides an overview of automated material handling systems, including automated guided vehicle systems (AGVS) and industrial robots. It describes the key components of AGVS, including different types of vehicles, guidance systems, and routing. Industrial robots are also introduced, covering their anatomy, classifications, control systems, and applications in industry. The objectives are to understand the importance of AGVS in manufacturing and the role of robots, as well as alternatives for automated material handling.
Material handling equipment from Godrej
Godrej Material Handling provides a range of material handling solutions such as electric, diesel forklifts, custom forklifts, pallets and stackers, mast lifts, scissor lifts, and industrial floor cleaning solutions. Click on the link to read more.
Abengoa Water in Asia and Pacific
Discover the business of Abengoa Water in Asia and Pacific, going through the past, the present and the future.
Material Handling Equipment by Besto Handling System Company, Chennai, Chennai
Material Handling Equipment by Besto Handling System Company, Chennai, Chennai IndiaMART InterMESH Limited
Started to create milestones, we, Besto Handling System Company, Chennai marked our presence in the year 2001 and operate in the manufacturing / servicing of Paper Roll Pallet Truck,Manual Operated Lift Table,Industrial Dock Levelers,Fork Stacker,Battery Operated Pallet Truck since 11 years. Our quality services / products have been always appreciated by our clients. Our spontaneous attitude and confident approach in offering an excellent range of Paper Roll Pallet Truck,Manual Operated Lift Table,Industrial Dock Levelers,Fork Stacker,Battery Operated Pallet Truck, Material Handling Equipment has deepened our roots in the market. We, Besto Handling System Company, Chennai breathe with the aim of fully satisfying our clients with our high-quality products / services. We are a unit of highly experienced professionals, all of them contributing at the best of their potentials to offer the highest degree of efficiency and client satisfaction.
Jyri Arponen: Circular economy playbook
A presentation on the circular economy playbook by Sitra, Technology Industries Finland and Accenture for international journalists visiting Finland on 31 October 2018. Presented by Leading specialist Jyri Arponen.
Culligan Industrial Water Filtration
Untreated water can damage expensive industrial equipment, but filtration systems from Culligan Industrial Water can mitigate these risks. Their custom systems use technologies like activated carbon filters, water softeners, deionizers and multi-media filters to provide benefits such as reduced maintenance and effluent costs, more efficient equipment, and less exposure to hazards. Culligan designs filtration solutions for industries like automotive, food and beverage, medical, electronics, and oil and gas.
Kari Herlevi: The circular economy and WCEF2018 in Japan
The circular economy aims to decouple economic activity from the consumption of finite resources by designing waste out of systems and keeping products and materials in use. Globally, demand for raw materials is increasing substantially while much of what is produced is wasted. Many countries and regions are now pioneering circular economy approaches and business models that focus on renewable energy, recycling, product life extension, and product-as-a-service models. Finland has developed a unique roadmap to become a global leader in the circular economy with the potential to create over 75,000 new jobs and reduce greenhouse gas emissions by 13-66% across sectors.
Maruti suzuki india limited
This document summarizes information about Maruti Suzuki India Limited, an automobile company based in Delhi. It discusses Maruti Suzuki's green manufacturing initiatives like using natural gas in plants and recycling over 12 lacs cubic meters of water annually. It also describes Maruti Suzuki's use of lean manufacturing techniques like the Maruti Production System and Kaizen for continuous improvement, which have helped reduce vehicle lead times from 57 to 13 days in 10 years. Kaizen is applied through employee KPAs and automation to ensure quality control and drive improvements within 30 days.
Circle Assessment
Continued investment in a linear economy results in long-term, system-wide impacts and risks. Moving to a circular economy is increasingly recognized as an opportunity to reduce risk and uncover new growth opportunities. However, while a variety of tools exist for measuring and quantifying sustainability topics and Environmental, Social, and Governance (ESG) factors, no tool currently exists that provides a comprehensive framework for circularity and specifically quantify how circular organisations are.
To address this, Circle Economy developed the Circle Assessment to establish a global standard to help investors and companies assess where organizations can create value by following the principles of a circular economy. Via an online survey, the Circle Assessment measures organisations against circular objectives and provides recommendations for how to capitalise on opportunities to adopt circular focused business practices.
Presentatie 3 coreman net @ circle economy seminar 2015
show you how reverse logistics (a.k.a. after market logistics) can be organized to be easy and effective, and explains how it can be applied in different sectors.
WSCP Energy presentation by Julie Bankes of Interserve
This document summarizes the sustainability strategy and initiatives of an organization called SustainAbilities. The strategy focuses on achieving positive social, environmental, financial, and knowledge outcomes through 15 goals across 4 capitals. Key environmental goals include halving carbon emissions by 2020 and reducing emissions from business travel and on-site energy generation. Initiatives to meet these goals include increasing efficient vehicles, generator sizing, renewable energy use, materials sourcing, building design, and workforce engagement through training and recognition programs. Progress to date includes reductions in absolute carbon, business travel emissions, and on-site energy emissions.
Future of manufacturing: a new era of opportunity and challenge for the UK - ...
Foresight project looking at the long-term picture for the UK manufacturing sector between now and 2050.
Read the summary report here: http://www.slideshare.net/bis_foresight/13-810futuremanufacturingsummaryreport
For more information, see: http://bit.ly/FoMn
(Ximb)sustainability auto ancilliary industry
The document discusses sustainable practices in the Indian auto ancillary industry. It profiles three major companies - Bosch Limited, Exide Industries Limited, and Amara Raja Batteries - and their approaches to sustainability. Bosch takes a systematic approach, using renewable energy sources, reducing emissions and waste, and promoting social responsibility. Exide focuses on responsible recycling of batteries, producing electric vehicle batteries, and maintaining pollution controls. Amara Raja emphasizes economic, social, and environmental responsibilities through various initiatives. The auto industry is working to develop more sustainable technologies and meet global development goals on reducing fossil fuel dependence.
Introduction to mechanical engineering
Mechanical engineering applies principles of physics and materials science to design, manufacture, and maintain mechanical systems. It involves production and use of heat and mechanical power. Some foundations include mathematics, physics, thermodynamics, materials science, gears and systems, fluid mechanics, and structural analysis. Mechanical engineering finds application in many industries like automotive, power, manufacturing, aerospace, and more. Skills useful for mechanical engineering include strong math and science skills, communication, teamwork, and a desire to apply ideas.
How industries benefit from pneumatic components
Manufacturing industries use pneumatic components because they are easy to use, clean, safe, and creates a better working environment and saves energy. Pneumatic components are the best choice for many applications in industries because they can provide a simple and safe solution. Pneumatic components use pressurised gas to power machines and tools.
http://pneumatictechnology.weebly.com/blog/how-industries-benefit-from-pneumatic-components
Design and development of farm power and machinery system
This PPT include about the modern trends, fundamentals principles and economic consideration for design and development of farm power and machinery systems
Proyecto interjabv
Este documento presenta información sobre hojas de cálculo. Cubre temas como cambios en la estructura como ajustar el alto de filas y anchos de columnas, insertar y eliminar elementos como filas y hojas, y aplicar formatos avanzados. También describe tipos de gráficos como de barras, circulares y de área para visualizar datos.
Corrientes teorias y enfoques del aprendizaje copia
Este documento presenta un resumen de las principales teorías del aprendizaje en psicología desde el conductismo hasta los enfoques cognitivos y socioculturales. Describe teorías como el condicionamiento operante de Pavlov y Skinner, el enfoque cognitivo de Piaget, el aprendizaje significativo de Ausubel, el descubrimiento de Bruner, y los enfoques socioculturales de Vygotsky y Feuerstein, entre otros. También examina conceptos como los estilos de aprendizaje, las inteligencias múltiples y la
Automatic pneumatic clutch and braking system
This document describes an automatic pneumatic clutch and braking system. It uses infrared sensors and a pneumatic braking circuit. When an obstacle is detected by the IR sensors, a control signal activates a solenoid valve which engages the pneumatic cylinder and air tank to stop the vehicle within 2-3 seconds from 50 km/h. It has applications for automobiles and industry. The system offers advantages like lower costs, less wear and simpler operation compared to other braking methods. The main disadvantage is the additional cost of automating the system.
Reintegros intensivos 2015
El documento anuncia dos fechas únicas para la entrega de reintegros a estudiantes que depositaron dinero pero no se inscribieron o depositaron una cantidad mayor a la requerida para cursos intensivos de agosto de 2015. La entrega se realizará en la oficina A7 de la Dirección del Programa de Análisis de Sistemas el 2 y 5 de febrero de 2016 en horarios específicos.
Android scalable and secure sharing of personal health records in cloud comp...
This document summarizes a research paper that proposes a novel framework for scalable and secure sharing of personal health records in cloud computing using attribute-based encryption. The framework aims to address issues like privacy exposure, scalability in key management, flexible access control and efficient user revocation. It leverages attribute-based encryption techniques to encrypt each patient's health records and divides users into multiple security domains to reduce complexity. The scheme guarantees patient privacy, enables dynamic modification of policies, and supports revocation and emergency access, as shown through analytical and experimental results.
Universaidad tecnológica equinoccial
El documento describe los objetivos del Plan Decenal de Educación de Ecuador entre 2006-2015 para lograr la universalización de la educación. Los objetivos incluyen aumentar la matrícula en educación inicial y básica, reducir el analfabetismo y el trabajo infantil, y mejorar la infraestructura escolar. El plan también busca mejorar la calidad de la educación a través de la formación docente y vincular la educación superior con la investigación y comunidades.
More Related Content
What's hot
Abengoa Water in Asia and Pacific
Discover the business of Abengoa Water in Asia and Pacific, going through the past, the present and the future.
Material Handling Equipment by Besto Handling System Company, Chennai, Chennai
Material Handling Equipment by Besto Handling System Company, Chennai, Chennai IndiaMART InterMESH Limited
Started to create milestones, we, Besto Handling System Company, Chennai marked our presence in the year 2001 and operate in the manufacturing / servicing of Paper Roll Pallet Truck,Manual Operated Lift Table,Industrial Dock Levelers,Fork Stacker,Battery Operated Pallet Truck since 11 years. Our quality services / products have been always appreciated by our clients. Our spontaneous attitude and confident approach in offering an excellent range of Paper Roll Pallet Truck,Manual Operated Lift Table,Industrial Dock Levelers,Fork Stacker,Battery Operated Pallet Truck, Material Handling Equipment has deepened our roots in the market. We, Besto Handling System Company, Chennai breathe with the aim of fully satisfying our clients with our high-quality products / services. We are a unit of highly experienced professionals, all of them contributing at the best of their potentials to offer the highest degree of efficiency and client satisfaction.
Jyri Arponen: Circular economy playbook
A presentation on the circular economy playbook by Sitra, Technology Industries Finland and Accenture for international journalists visiting Finland on 31 October 2018. Presented by Leading specialist Jyri Arponen.
Culligan Industrial Water Filtration
Untreated water can damage expensive industrial equipment, but filtration systems from Culligan Industrial Water can mitigate these risks. Their custom systems use technologies like activated carbon filters, water softeners, deionizers and multi-media filters to provide benefits such as reduced maintenance and effluent costs, more efficient equipment, and less exposure to hazards. Culligan designs filtration solutions for industries like automotive, food and beverage, medical, electronics, and oil and gas.
Kari Herlevi: The circular economy and WCEF2018 in Japan
The circular economy aims to decouple economic activity from the consumption of finite resources by designing waste out of systems and keeping products and materials in use. Globally, demand for raw materials is increasing substantially while much of what is produced is wasted. Many countries and regions are now pioneering circular economy approaches and business models that focus on renewable energy, recycling, product life extension, and product-as-a-service models. Finland has developed a unique roadmap to become a global leader in the circular economy with the potential to create over 75,000 new jobs and reduce greenhouse gas emissions by 13-66% across sectors.
Maruti suzuki india limited
This document summarizes information about Maruti Suzuki India Limited, an automobile company based in Delhi. It discusses Maruti Suzuki's green manufacturing initiatives like using natural gas in plants and recycling over 12 lacs cubic meters of water annually. It also describes Maruti Suzuki's use of lean manufacturing techniques like the Maruti Production System and Kaizen for continuous improvement, which have helped reduce vehicle lead times from 57 to 13 days in 10 years. Kaizen is applied through employee KPAs and automation to ensure quality control and drive improvements within 30 days.
Circle Assessment
Continued investment in a linear economy results in long-term, system-wide impacts and risks. Moving to a circular economy is increasingly recognized as an opportunity to reduce risk and uncover new growth opportunities. However, while a variety of tools exist for measuring and quantifying sustainability topics and Environmental, Social, and Governance (ESG) factors, no tool currently exists that provides a comprehensive framework for circularity and specifically quantify how circular organisations are.
To address this, Circle Economy developed the Circle Assessment to establish a global standard to help investors and companies assess where organizations can create value by following the principles of a circular economy. Via an online survey, the Circle Assessment measures organisations against circular objectives and provides recommendations for how to capitalise on opportunities to adopt circular focused business practices.
Presentatie 3 coreman net @ circle economy seminar 2015
show you how reverse logistics (a.k.a. after market logistics) can be organized to be easy and effective, and explains how it can be applied in different sectors.
WSCP Energy presentation by Julie Bankes of Interserve
This document summarizes the sustainability strategy and initiatives of an organization called SustainAbilities. The strategy focuses on achieving positive social, environmental, financial, and knowledge outcomes through 15 goals across 4 capitals. Key environmental goals include halving carbon emissions by 2020 and reducing emissions from business travel and on-site energy generation. Initiatives to meet these goals include increasing efficient vehicles, generator sizing, renewable energy use, materials sourcing, building design, and workforce engagement through training and recognition programs. Progress to date includes reductions in absolute carbon, business travel emissions, and on-site energy emissions.
Future of manufacturing: a new era of opportunity and challenge for the UK - ...
Foresight project looking at the long-term picture for the UK manufacturing sector between now and 2050.
Read the summary report here: http://www.slideshare.net/bis_foresight/13-810futuremanufacturingsummaryreport
For more information, see: http://bit.ly/FoMn
(Ximb)sustainability auto ancilliary industry
The document discusses sustainable practices in the Indian auto ancillary industry. It profiles three major companies - Bosch Limited, Exide Industries Limited, and Amara Raja Batteries - and their approaches to sustainability. Bosch takes a systematic approach, using renewable energy sources, reducing emissions and waste, and promoting social responsibility. Exide focuses on responsible recycling of batteries, producing electric vehicle batteries, and maintaining pollution controls. Amara Raja emphasizes economic, social, and environmental responsibilities through various initiatives. The auto industry is working to develop more sustainable technologies and meet global development goals on reducing fossil fuel dependence.
Introduction to mechanical engineering
Mechanical engineering applies principles of physics and materials science to design, manufacture, and maintain mechanical systems. It involves production and use of heat and mechanical power. Some foundations include mathematics, physics, thermodynamics, materials science, gears and systems, fluid mechanics, and structural analysis. Mechanical engineering finds application in many industries like automotive, power, manufacturing, aerospace, and more. Skills useful for mechanical engineering include strong math and science skills, communication, teamwork, and a desire to apply ideas.
How industries benefit from pneumatic components
Manufacturing industries use pneumatic components because they are easy to use, clean, safe, and creates a better working environment and saves energy. Pneumatic components are the best choice for many applications in industries because they can provide a simple and safe solution. Pneumatic components use pressurised gas to power machines and tools.
http://pneumatictechnology.weebly.com/blog/how-industries-benefit-from-pneumatic-components
Design and development of farm power and machinery system
This PPT include about the modern trends, fundamentals principles and economic consideration for design and development of farm power and machinery systems
What's hot (14)
Material Handling Equipment by Besto Handling System Company, Chennai, Chennai
Material Handling Equipment by Besto Handling System Company, Chennai, Chennai
Kari Herlevi: The circular economy and WCEF2018 in Japan
Kari Herlevi: The circular economy and WCEF2018 in Japan
Presentatie 3 coreman net @ circle economy seminar 2015
Presentatie 3 coreman net @ circle economy seminar 2015
WSCP Energy presentation by Julie Bankes of Interserve
WSCP Energy presentation by Julie Bankes of Interserve
Future of manufacturing: a new era of opportunity and challenge for the UK - ...
Future of manufacturing: a new era of opportunity and challenge for the UK - ...
Design and development of farm power and machinery system
Design and development of farm power and machinery system
Viewers also liked
Proyecto interjabv
Este documento presenta información sobre hojas de cálculo. Cubre temas como cambios en la estructura como ajustar el alto de filas y anchos de columnas, insertar y eliminar elementos como filas y hojas, y aplicar formatos avanzados. También describe tipos de gráficos como de barras, circulares y de área para visualizar datos.
Corrientes teorias y enfoques del aprendizaje copia
Este documento presenta un resumen de las principales teorías del aprendizaje en psicología desde el conductismo hasta los enfoques cognitivos y socioculturales. Describe teorías como el condicionamiento operante de Pavlov y Skinner, el enfoque cognitivo de Piaget, el aprendizaje significativo de Ausubel, el descubrimiento de Bruner, y los enfoques socioculturales de Vygotsky y Feuerstein, entre otros. También examina conceptos como los estilos de aprendizaje, las inteligencias múltiples y la
Automatic pneumatic clutch and braking system
This document describes an automatic pneumatic clutch and braking system. It uses infrared sensors and a pneumatic braking circuit. When an obstacle is detected by the IR sensors, a control signal activates a solenoid valve which engages the pneumatic cylinder and air tank to stop the vehicle within 2-3 seconds from 50 km/h. It has applications for automobiles and industry. The system offers advantages like lower costs, less wear and simpler operation compared to other braking methods. The main disadvantage is the additional cost of automating the system.
Reintegros intensivos 2015
El documento anuncia dos fechas únicas para la entrega de reintegros a estudiantes que depositaron dinero pero no se inscribieron o depositaron una cantidad mayor a la requerida para cursos intensivos de agosto de 2015. La entrega se realizará en la oficina A7 de la Dirección del Programa de Análisis de Sistemas el 2 y 5 de febrero de 2016 en horarios específicos.
Android scalable and secure sharing of personal health records in cloud comp...
This document summarizes a research paper that proposes a novel framework for scalable and secure sharing of personal health records in cloud computing using attribute-based encryption. The framework aims to address issues like privacy exposure, scalability in key management, flexible access control and efficient user revocation. It leverages attribute-based encryption techniques to encrypt each patient's health records and divides users into multiple security domains to reduce complexity. The scheme guarantees patient privacy, enables dynamic modification of policies, and supports revocation and emergency access, as shown through analytical and experimental results.
Universaidad tecnológica equinoccial
El documento describe los objetivos del Plan Decenal de Educación de Ecuador entre 2006-2015 para lograr la universalización de la educación. Los objetivos incluyen aumentar la matrícula en educación inicial y básica, reducir el analfabetismo y el trabajo infantil, y mejorar la infraestructura escolar. El plan también busca mejorar la calidad de la educación a través de la formación docente y vincular la educación superior con la investigación y comunidades.
Examining the appeal of music videos to audience
The document discusses important elements for music videos including showcasing an artist's talents through dance and instrumentation, maintaining eye contact to connect with audiences, and using visual elements like locations and fashion to reflect the music genre and appeal to target demographics, especially younger viewers. Eye contact and connecting with audiences is especially important for new artists. The overall goal is to effectively promote the artist and their music through entertaining and engaging music videos.
Burnout
Este documento presenta un caso de estrés laboral asistencial o burnout en el que se pide analizar las emociones, pensamientos y conductas de la persona afectada, así como recomendar estrategias de afrontamiento y medidas preventivas. También incluye una guía con los principales temas asociados a diferentes emociones.
Lisbeth arevalo
Este documento describe qué son los virus informáticos, sus formas de contagio y cómo prevenirlos. Explica que un virus es un programa que se introduce discretamente en un sistema para activarse bajo ciertas condiciones y causar daños. Detalla los tipos de virus según los daños que causan y cómo infectan dispositivos a través de redes sociales, correos, sitios web y USBs. Además, indica señales de infección y la importancia de usar software antivirus actualizado para prevenir virus.
Pendidik
Dokumen tersebut berisi informasi mengenai standar pendidik dan tenaga kependidikan di sebuah SMP/MTs. Terdapat 18 guru dengan berbagai latar belakang pendidikan. Semua guru memiliki kesesuaian latar belakang pendidikan dengan mata pelajaran yang diampu kecuali 3 orang. Kepala sekolah berlatar belakang S2 dan memiliki pengalaman mengajar lebih dari 5 tahun. Terdapat juga tenaga administrasi, perpustakaan, labor
Anonymization of centralized and distributed social networks by sequential cl...
This document summarizes an algorithm for anonymizing centralized and distributed social networks through sequential clustering. It presents two variants of an anonymization algorithm that significantly outperform the leading SaNGreeA algorithm. The algorithms are then adapted into secure distributed versions to anonymize networks where data is split between multiple data holders, preserving privacy without revealing links between nodes controlled by other data holders. This is presented as the first study of privacy preservation in distributed social networks.
Bobbio majail
Este documento resume las teorías de varios pensadores políticos como Platón, Aristóteles, Polibio, Maquiavelo, Bodino, Hobbes, Montesquieu, Hegel y Marx sobre las diferentes formas de gobierno a lo largo de la historia. Explica brevemente las ideas principales de cada autor sobre monarquía, aristocracia, democracia y otras formas de gobierno, y cómo estas teorías han influenciado el desarrollo político.
Trabajo grupal informatica
La Web 2.0 facilita el compartir información y la colaboración entre usuarios a través de comunidades en línea, redes sociales, wikis y blogs. Permite mejorar el trabajo en el aula y la empresa mediante herramientas como los servicios de video y etiquetado social. Surge como evolución de la tecnología que permite una web más participativa y centrada en el usuario.
Teoria y psicologia del color
El documento presenta información sobre los significados y asociaciones simbólicas de diferentes colores. Explica que el negro representa oscuridad y poder, pero también elegancia; el blanco representa luz, pureza e inocencia; y el verde representa naturaleza, vida y salud. También describe las asociaciones del amarillo con la felicidad, el sol y la energía; del rojo con la pasión, el peligro y la fuerza; y del rosa y naranja con sentimientos como el amor y la juventud.
Eugene Lamonova
This document provides biographical information about Russian fencer Yevgeniya Lamonova. It details her date of birth, place of birth, height, weight, and career achievements including an individual gold medal at the 2008 Olympics in Beijing and multiple medals at World and European Championships. It also lists her current world ranking of 8th and awards received including the Order of Friendship from Russia.
Reham Ashry cv
With over three years experience in architectural design, I have exceptional skills and experience in planning, detailing and interior design . In addition to excellent communication, public relations, problem-solving and leadership skills.
Marketing de contenidos
El marketing de contenidos es una estrategia de marketing que implica la creación y distribución de contenido valioso y relevante para los clientes con el objetivo de atraer nuevos leads, construir la autoridad de la marca y generar confianza. Al crear contenido de alta calidad en forma de artículos, videos, infografías u otros formatos, las empresas pueden establecerse como expertas en su industria y atraer a nuevos clientes orgánicamente a través de los motores de búsqueda y redes sociales. Un programa de marketing de contenidos bien
Viewers also liked (20)
Corrientes teorias y enfoques del aprendizaje copia
Corrientes teorias y enfoques del aprendizaje copia
Android scalable and secure sharing of personal health records in cloud comp...
Android scalable and secure sharing of personal health records in cloud comp...
Anonymization of centralized and distributed social networks by sequential cl...
Anonymization of centralized and distributed social networks by sequential cl...
Similar to Automatic trolley
IRJET- Six Axis Pneumatic Materials Handling Robotic Arm
This document describes the design of a six-axis pneumatic robotic arm for materials handling. It begins with an abstract that outlines the goals of reducing costs associated with materials handling through automation. It then provides background on pneumatic systems and their suitability for automation in manufacturing. The document describes the design methodology, including a flow chart, and provides details on the proposed robotic arm system, including definitions of key parameters like workspace, payload capacity, accuracy and repeatability. It also defines the problems the robotic arm aims to address in materials handling. The document gives objectives to reduce time and costs of materials handling. It provides details on materials selection, frame design, selection of standard pneumatic components like cylinders and control valves. Calculations are shown
IRJET- Design and Development of Sensor Operated Walking Beam Conveyor Sy...
1. The document describes the design and development of a sensor-operated walking beam conveyor system for automated material handling.
2. Key features of the system include sensors that detect objects placed on the conveyor and activate gear motors to move objects forward one step at a time, and a display that counts the number of objects handled.
3. The automated system is intended to reduce power consumption by only operating the conveyor when an object is sensed, as well as increase efficiency and safety.
Robots
The upcoming generation may have the chances of using more robotics and this advancement is taking a rapid fire glow among the heavy work culture and monotonous jobs.
Robotics in operations management for mbant
This presentation is mainly focused on robotics in manufacturing sector
TRANING REPORT ON PLC SCADA and AUTOMATION
This document provides information about a training report on PLC, SCADA, and automation submitted by Vikash Ranjan. It includes an index, acknowledgements, information about the company Kaizen Robeonics Pvt. Ltd., introductions to automation, PLCs, and SCADA. It also discusses the architecture and programming of PLCs and SCADA software, as well as applications of PLCs, SCADA, industrial automation, and home automation. Limitations of automation are also addressed.
Training Report on PLC SCADA and AUTOMATION
This document provides information about programmable logic controllers (PLCs), including:
- PLCs were developed in the 1960s to replace relay control systems and reduce costs for automakers. They allow flexible control without rewiring.
- PLCs have a CPU that runs a user program to monitor inputs and control outputs based on logic. Ladder logic is a common programming method that resembles electrical diagrams.
- The document discusses PLC components, architecture, programming methods like ladder logic, common instructions, timers, counters and their applications in automation. It also provides an introduction to supervisory control and data acquisition (SCADA) systems.
3 axis modern trailer
This document provides information about Ecway Technologies, an engineering company located in multiple cities in India that specializes in projects and software development. It includes their contact information and addresses their fabrication of a flexible tipper system for modern trailers using 3-axis pneumatic control. The system allows unloading on the left, right, or back sides using separate pneumatic cylinders and control valves to activate the airflow to each cylinder one at a time. This provides more efficient unloading than traditional trailers that only allow unloading from the back. The only listed disadvantage is potential low stability.
3 axis modern trailer
This document provides information about Ecway Technologies, an engineering company located in multiple cities in India. It includes their contact information and websites. It then summarizes a project to design a flexible tipper system for a modern trailer using 3-axis pneumatic control. The system allows unloading on the left, right, or back sides using separate pneumatic cylinders and control valves. It provides a diagram of the system and discusses advantages like efficient power transmission and easy holding process, with the single disadvantage of potential low stability.
Creative Engineering
The document provides an overview of the author's experience in creative engineering. It summarizes 3 projects the author has worked on: 1) Developing a system for placing carrying handles on PET bottles that reduces cycle time to 2 handles per second. 2) Minimizing costs and improving efficiency through re-engineering projects. 3) Designing an industrial reciprocating bread slicer with unique cooling, wear resistance, and hygienic features.
Conveyor System- A backbone of industrial operations.pdf
A conveyor system is indeed considered the backbone of many industrial operations, playing a vital role in the efficient movement of materials, products, and goods within a manufacturing or distribution facility. Here are some reasons why conveyor systems are regarded as essential components in industrial settings:
Conveyor System- A backbone of industrial operations.docx
A conveyor system is indeed considered the backbone of many industrial operations, playing a vital role in the efficient movement of materials, products, and goods within a manufacturing or distribution facility. Here are some reasons why conveyor systems are regarded as essential components in industrial settings:
Applications of Industry4.0
Drop by drop the ocean builds up. Similarly, small innovations build up to count in implementing Industrie 4.0 across the world.Presently there are more examples in German Factories but the other countries are fast catching up. All these small examples give a remarkable picture of how the world is changing. And also gives us a direction to how we should change our skill sets to meet the ever growing Knowledge Economy. For students, you get an idea where research work is headed. The examples of Applications of Industrie 4.0 will give an idea of how small drops of technology changes is building into an ocean of Innovative ideas across the Industrial Spectrum.
Development of Bottle Unscramble Machine
This document describes the development of a bottle unscramble machine. The machine was designed to automatically position bottles vertically on a conveyor belt to increase efficiency and reduce manual labor. It consists of a drum that feeds bottles to a conveyor belt. The belt is rotated via a gearing mechanism connected to a DC motor. As the bottles move on the belt, a wooden scrapper helps guide them into a vertical position. The positioning accuracy of the machine is 95% due to the wooden construction. It has applications in bottle filling and packaging plants to further automate processing. The overall aim was to create an inexpensive and maintenance-free solution to automatically organize bottles on a conveyor line.
Conveyor Belts_ Industry Efficiency Revolution.pptx
Conveyor belts may seem like a mundane aspect of industrial infrastructure, but their impact on efficiency and productivity cannot be overstated. From manufacturing plants to distribution centers, these humble mechanisms quietly power the engines of production, enabling businesses to operate more effectively and sustainably. For more information, visit: https://www.shibambelting.com/food-conveyor-belts-uae/
Material Handling equipment.docx
Material handling involves the movement, storage, and control of materials throughout the supply chain, from manufacturing to disposal. It incorporates manual, semi-automated, and automated equipment to support logistics and improve processes like forecasting, production planning, and inventory management. A company's material handling system is designed to improve customer service, reduce costs, and streamline operations. There are many types of material handling equipment available, from conveyors and lift trucks to automated storage and retrieval systems and industrial robots, that can aid in the efficient movement of materials. When designing a system, it is important to consider best practices to ensure all elements work as a unified whole.
Conveyor Belts_ Industry Efficiency Revolution.pdf
Conveyor belts may seem like a mundane aspect of industrial infrastructure, but their impact on efficiency and productivity cannot be overstated. From manufacturing plants to distribution centers, these humble mechanisms quietly power the engines of production, enabling businesses to operate more effectively and sustainably. For more information, visit: https://www.shibambelting.com/food-conveyor-belts-uae/
IRJET- Automatic Reverse Breaking System for Trolley
This document describes a proposed automatic reverse braking system for vehicles. The system uses sensors to detect obstacles behind a vehicle in reverse and automatically applies the brakes to prevent collisions. It is meant to address the problem of accidents that occur during reversing due to difficulties detecting objects or careless driving. The system would process sensor data and control the vehicle brakes to maintain a safe distance from any detected objects. It proposes implementing the control logic on an FPGA (field programmable gate array) microcontroller. The goal is to design a reliable automatic braking system that prevents injuries from reversing collisions by quickly detecting obstacles and braking the vehicle.
SEWAGE TREATMENT PLANTS WITH MESSUNG'S NX-ERA XPRESS SERIES.pptx
SEWAGE TREATMENT PLANTS WITH MESSUNG'S NX-ERA XPRESS SERIES.pptxMessung Industrial Automation & Controls
ABOUT SEWAGE TREATMENT PLANTS
Sewage is the waste generated from residential, institutional, commercial and industrial establishments.
Due to the hazardous impacts of municipal, industrial and hospital wastewater on water, soil, air and agricultural products, wastewater treatment and the proper disposal of the sludge produced are indispensable from an environmental safety point of view.
Moreover, reuse of sewage is the most sustainable and long-term solution to the problem of water scarcity.
Sewage Treatment Plants (STP) treat the sewage and waste water to produce a cleaner, more environmentally friendly effluent that is safe for disposal, gardening/agricultural use or domestic use in toilets, etc.
Physical, chemical, and biological processes are used to remove contaminants and produce treated wastewater (or treated effluent) that is safer for discharge into the environment.MODELING (mechanical) AND ANALYSIS OF ROBO-ARM FOR PICK AND PLACE OPERATION I...
Robo- arm is assembly of number of joints which can work in 180 degree direction that allows the object to 'move' in its require direction, and is commonly used in mechanical industry where pick and place operation are carried out .It consists of a pair of hinges located close together, oriented at maximum 90° to each other, connected by a pin joint .Now, this project is based from ceramic industry in which the robo-arm perform its operation for pick and place activity very quickly. Here, I design the mechanical structure of robo-arm. Robo-arm can work at which places where, human can't work continuously in ceramic industry. For example at Furnace division .Robo-arm has its own end effectors. with the help of it, rob-arm can pick the object easily and safely. Basic design concept is taken from ceramic industry at the furnace division where, the working temperature is more than ambient temperature .With the help robo -arm we can save the time and cost, as compare to crane operated loading system and manual belt conveyor system, because robo-arm can place the component at particular place of the part storage area.
IRMHS.pptx
Pick and place robots are automated systems that use grippers and vision systems to efficiently handle objects in manufacturing. They increase production speed and accuracy while reducing human labor. Advancements in sensors and programming have made robots more versatile and capable of handling diverse tasks. Popular pick and place robots provide high payloads, speeds, and precision needed for applications in industries like electronics, food, and pharmaceuticals. Continued improvements in areas like artificial intelligence and machine learning are expected to further enhance robots' capabilities.
Similar to Automatic trolley (20)
IRJET- Six Axis Pneumatic Materials Handling Robotic Arm
IRJET- Six Axis Pneumatic Materials Handling Robotic Arm
IRJET- Design and Development of Sensor Operated Walking Beam Conveyor Sy...
IRJET- Design and Development of Sensor Operated Walking Beam Conveyor Sy...
Conveyor System- A backbone of industrial operations.pdf
Conveyor System- A backbone of industrial operations.pdf
Conveyor System- A backbone of industrial operations.docx
Conveyor System- A backbone of industrial operations.docx
Conveyor Belts_ Industry Efficiency Revolution.pptx
Conveyor Belts_ Industry Efficiency Revolution.pptx
Conveyor Belts_ Industry Efficiency Revolution.pdf
Conveyor Belts_ Industry Efficiency Revolution.pdf
IRJET- Automatic Reverse Breaking System for Trolley
IRJET- Automatic Reverse Breaking System for Trolley
SEWAGE TREATMENT PLANTS WITH MESSUNG'S NX-ERA XPRESS SERIES.pptx
SEWAGE TREATMENT PLANTS WITH MESSUNG'S NX-ERA XPRESS SERIES.pptx
MODELING (mechanical) AND ANALYSIS OF ROBO-ARM FOR PICK AND PLACE OPERATION I...
MODELING (mechanical) AND ANALYSIS OF ROBO-ARM FOR PICK AND PLACE OPERATION I...
More from Ecwaytechnoz
Wheelztracker.pptx
WHEELZ TRACKER is a provider of GPS based vehicle tracking system for transportation, Utility vehicles, Public transit, Logistics and delivery. Our GPS technology solution designed for vehicle owners and managers with a personalized digital dashboard with live-tracking, Fuel monitoring and alert features.
Coloring based inter-wban scheduling for mobile wireless body area networks
This document describes a study on inter-WBAN scheduling for mobile wireless body area networks. The study proposes a random incomplete coloring algorithm with low time complexity and high spatial reuse to overcome interference between wireless body area networks. Simulation results show that the proposed coloring algorithm effectively overcomes inter-WBAN interference and supports higher system throughput in various mobile WBAN scenarios compared to conventional coloring methods.
Code modulation based encryption & decryption technique for secure communicat...
This document describes a code modulation based encryption and decryption technique for secure wireless communication. The system has a transmitter section and receiver section, each designed around a microcontroller. At the transmitter, data typed into a PC is encrypted using the microcontroller and transmitted via RF. At the receiver, the encrypted data is received, decoded by the microcontroller, and displayed on the PC. To view the actual data, a password must be entered which decrypts the cipher text into plaintext. The block diagram shows the transmitter components include an encoder, microcontroller, MAX232, and RF transmitter. The receiver components include a decoder, microcontroller, MAX232, and RF receiver.
Clustering sentence level text using a novel fuzzy relational clustering algo...
Ecway Technologies is a software development company with offices in multiple cities in Tamil Nadu, India. They can be contacted via phone or email.
The paper presents a novel fuzzy clustering algorithm that operates on relational input data in the form of a pairwise similarity matrix between objects. The algorithm uses a graph representation and models centrality as likelihood in an Expectation-Maximization framework. Results show the algorithm can identify overlapping clusters of semantically related sentences, demonstrating potential use in text mining tasks. It was also applied successfully to benchmark datasets in other domains.
Clustering large probabilistic graphs
This document summarizes a study on clustering probabilistic graphs. The study extends the definition of graph clustering to probabilistic graphs using an edit-distance-based objective function. It connects this objective function to correlation clustering to develop practical approximation algorithms. The algorithms discover the correct number of clusters in a probabilistic protein-protein interaction network and identify established protein relationships. The techniques also proved practical on a large social network with one billion edges.
Cloudsim t-drive enhancing driving directions with taxi drivers’ intelligence
This paper presents a smart driving direction system that leverages taxi drivers' intelligence and experience. GPS-equipped taxis act as mobile sensors to model the dynamic traffic patterns of a city. A time-dependent landmark graph models traffic patterns and experienced drivers' route choices to provide users with the practically fastest route to a destination at a given departure time. A clustering approach estimates travel times between landmarks in different time slots. A two-stage routing algorithm then computes a customized, practically fastest route for the user based on this graph and real-world trajectory data from over 33,000 taxis over three months. Evaluation found that 60-70% of routes suggested were faster than alternatives, with 20% sharing results, and on average routes
Cloudsim ranking on data manifold with sink points
This document provides an abstract for a paper on a novel ranking approach called Manifold Ranking with Sink Points (MRSP). MRSP addresses diversity, relevance, and importance in ranking by using manifold ranking over a data manifold to find relevant and important objects, while turning already ranked objects into "sink points" to prevent redundant objects from receiving a high rank. Experimental results on update summarization and query recommendation tasks showed MRSP performed better than existing ranking approaches by better addressing the importance of diversity in ranking.
Cloudsim quality-differentiated video multicast in multirate wireless networks
This document summarizes a research paper on providing differentiated quality video multicast in multirate wireless networks. It proposes a rate scheduling model that selects the optimal transmission bitrate for each video frame to maximize total visual quality while guaranteeing a minimum quality. It also presents a practical protocol called QDM that constructs cluster-based groups, adapts transmission rates based on quality perceived by cluster heads, and is suitable for real-time streaming. Simulation results show QDM can efficiently adapt to network dynamics and variable video bitrates, producing a 2-5 dB gain in average video quality over leader-based approaches.
Cloudsim power allocation for statistical qo s provisioning in opportunistic...
The document proposes a power allocation scheme for statistical quality-of-service provisioning in multi-relay cognitive networks. The scheme first chooses between direct transmission or relay transmission based on channel state information. It then performs efficient power allocation according to the transmission mode and given constraints like quality-of-service requirements, average transmit power limits, and peak interference limits. Simulations show the proposed scheme outperforms max-min criterion and equal power allocation policies by achieving higher throughput while involving at most two relays for transmission.
Cloudsim distributed web systems performance forecasting using turning bands...
The document discusses using the Turning Bands method to forecast the performance of distributed web systems. Real-life data was obtained from an experiment monitoring a group of web servers worldwide using an agent system called MWING located in different parts of Poland. The results showed good quality in predicting web performance when European web servers were monitored from an agent in Gliwice, Poland using the Turning Bands method.
Cloudsim distributed processing of probabilistic top-k queries in wireless s...
This document summarizes a paper on distributed processing of probabilistic top-k queries in wireless sensor networks. It introduces the concepts of sufficient and necessary sets, which can facilitate localized data pruning in clusters. It then describes three algorithms - sufficient set-based, necessary set-based, and boundary-based - for intercluster query processing with bounded communication rounds. Finally, it presents an adaptive algorithm that dynamically switches between the three algorithms to minimize transmission cost, and experimental results showing the algorithms significantly reduce data transmission with small constant communication rounds, with the adaptive algorithm performing near-optimally under various conditions.
Civil 2013 titles
This document contains 15 titles for civil engineering projects related to structural analysis. The titles cover topics like analyzing beams, trusses, bridges, dams, storage racks, and auditorium seating under various loads and conditions using techniques like finite element analysis, static analysis, and blast/dynamic analysis. The analyses will determine factors like deflection, stresses, and performance in applications like buildings, transportation, and temporary structures.
Chopper based dc motor speed control
This document discusses using a chopper circuit to control the speed of a DC motor. A chopper circuit uses MOSFETs to vary the voltage applied to the motor, allowing for remote speed control. This method is more efficient and compact than previous variable resistor and transformer-based controls. Pressing buttons on the chopper circuit varies the MOSFET firing angle, decreasing motor speed as the firing angle increases. The chopper control reduces motor current, losses, temperature, noise, and increases motor lifetime compared to DC operation.
Channel assignment for throughput optimization in multichannel multiradio wir...
ECWAY Technologies provides IEEE projects and software development services from its offices in multiple cities across India. The document discusses channel assignment for throughput optimization in ultichannel multiradio wireless mesh networks using network coding. It formulates the joint problem of random network coding, channel assignment, and broadcast link scheduling taking into account factors like opportunistic overhearing, interference constraints, coding constraints, number of channels, radios per node, and fairness among unicast connections. An auction-based suboptimal solution is developed for overall network throughput optimization. Evaluation shows the algorithm can effectively exploit multiple radios and channels and cope with fairness issues from auctions, with promising gains over traditional routing solutions.
Channel allocation and routing in hybrid multichannel multiradio wireless mes...
The document discusses channel allocation and routing in hybrid multichannel multiradio wireless mesh networks. It proposes an Adaptive Dynamic Channel Allocation (ADCA) protocol that considers both throughput and delay optimization in channel assignment. It also proposes an Interference and Congestion Aware Routing (ICAR) protocol for hybrid networks with static and dynamic links that balances channel usage. Simulation results show that ADCA reduces packet delay significantly without degrading throughput, and the hybrid architecture adapts better to changing traffic than static-only architectures with lower overhead and delay than existing hybrid network approaches.
Casual stereoscopic photo authoring
Ecway Technologies provides software development and IEEE projects services from offices located in multiple cities across India. They can be contacted via phone or email on their website at www.ecwayprojects.com.
The paper presents a method for easy stereoscopic photo authoring using a regular monocular camera. It takes two input images or video frames and transforms them into a stereoscopic image pair for pleasant 3D viewing. This is done through a perceptual-plausible image rectification algorithm that warps the input pairs to meet stereoscopic geometric constraints while avoiding visual distortion. The warping uses spatially-varying mesh-based warps that encode various constraints to best meet the stereoscopic geometry and minimize distortion. Experiments show the
Casual stereoscopic photo authoring
Ecway Technologies provides software development and IEEE projects services from offices located in multiple cities across India. They can be contacted via phone or email on their website at www.ecwayprojects.com.
The paper presents a method for easy stereoscopic photo authoring using a regular monocular camera. It takes two input images or video frames and transforms them into a stereoscopic image pair for pleasant 3D viewing. This is done through a perceptual-plausible image rectification algorithm that warps the input pairs to meet stereoscopic geometric constraints while avoiding visual distortion. The warping uses spatially-varying mesh-based warps that encode various constraints to best meet the stereoscopic geometry and minimize distortion. Experiments show the
Capacity of hybrid wireless mesh networks with random a ps
This paper proposes a hybrid wireless mesh network (WMN) architecture that allows the backbone to utilize random connections to access points (APs) in a wireless local area network (WLAN). Theoretical analysis shows that the capacity of a three-tier hybrid WMN is affected by the number of mesh router cells connected to APs, the ratio of access link bandwidth to backbone link bandwidth, and traffic balance among routers with AP access. Simulation results demonstrate that configuring APs and balancing traffic can significantly improve network capacity in the proposed hybrid architecture by taking advantage of wired connections through APs.
Bomb detection robot with wireless camera
This prototype robot is designed to help bomb squads by remotely detecting bombs and obstacles. It uses sensors to detect metals and obstacles as it moves through an area, sending that information back to operators via a wireless camera and computer. The robot is navigated and directed remotely using the camera while its metal detection, obstacle detection, and location data are sent to a base station for operators to monitor on LED displays and sounds.
Bed side patients monitoring system with emergency alert
The document describes a bedside patient monitoring system that measures temperature data using a portable medical monitoring unit. The unit contains a microcontroller, sensor board, and processing system to manage information, analyze data in real-time, and provide warnings for emergencies or abnormal diagnoses. The system takes a patient's temperature, converts it to digital using an ADC, and sends it to the microcontroller for processing. If the temperature exceeds a threshold, the system sounds a buzzer for notification.
More from Ecwaytechnoz (20)
Coloring based inter-wban scheduling for mobile wireless body area networks
Coloring based inter-wban scheduling for mobile wireless body area networks
Code modulation based encryption & decryption technique for secure communicat...
Code modulation based encryption & decryption technique for secure communicat...
Clustering sentence level text using a novel fuzzy relational clustering algo...
Clustering sentence level text using a novel fuzzy relational clustering algo...
Cloudsim t-drive enhancing driving directions with taxi drivers’ intelligence
Cloudsim t-drive enhancing driving directions with taxi drivers’ intelligence
Cloudsim ranking on data manifold with sink points
Cloudsim ranking on data manifold with sink points
Cloudsim quality-differentiated video multicast in multirate wireless networks
Cloudsim quality-differentiated video multicast in multirate wireless networks
Cloudsim power allocation for statistical qo s provisioning in opportunistic...
Cloudsim power allocation for statistical qo s provisioning in opportunistic...
Cloudsim distributed web systems performance forecasting using turning bands...
Cloudsim distributed web systems performance forecasting using turning bands...
Cloudsim distributed processing of probabilistic top-k queries in wireless s...
Cloudsim distributed processing of probabilistic top-k queries in wireless s...
Channel assignment for throughput optimization in multichannel multiradio wir...
Channel assignment for throughput optimization in multichannel multiradio wir...
Channel allocation and routing in hybrid multichannel multiradio wireless mes...
Channel allocation and routing in hybrid multichannel multiradio wireless mes...
Capacity of hybrid wireless mesh networks with random a ps
Capacity of hybrid wireless mesh networks with random a ps
Bed side patients monitoring system with emergency alert
Bed side patients monitoring system with emergency alert
Recently uploaded
Business storytelling: key ingredients to a story
Storytelling is an incredibly valuable tool to share data and information. To get the most impact from stories there are a number of key ingredients. These are based on science and human nature. Using these elements in a story you can deliver information impactfully, ensure action and drive change.
The latest Heat Pump Manual from Newentide
𝐔𝐧𝐯𝐞𝐢𝐥 𝐭𝐡𝐞 𝐅𝐮𝐭𝐮𝐫𝐞 𝐨𝐟 𝐄𝐧𝐞𝐫𝐠𝐲 𝐄𝐟𝐟𝐢𝐜𝐢𝐞𝐧𝐜𝐲 𝐰𝐢𝐭𝐡 𝐍𝐄𝐖𝐍𝐓𝐈𝐃𝐄’𝐬 𝐋𝐚𝐭𝐞𝐬𝐭 𝐎𝐟𝐟𝐞𝐫𝐢𝐧𝐠𝐬
Explore the details in our newly released product manual, which showcases NEWNTIDE's advanced heat pump technologies. Delve into our energy-efficient and eco-friendly solutions tailored for diverse global markets.
Best Forex Brokers Comparison in INDIA 2024
Navigating the world of forex trading can be challenging, especially for beginners. To help you make an informed decision, we have comprehensively compared the best forex brokers in India for 2024. This article, reviewed by Top Forex Brokers Review, will cover featured award winners, the best forex brokers, featured offers, the best copy trading platforms, the best forex brokers for beginners, the best MetaTrader brokers, and recently updated reviews. We will focus on FP Markets, Black Bull, EightCap, IC Markets, and Octa.
How to Buy an Engagement Ring.pcffbhfbfghfhptx
Dive into this presentation and learn about the ways in which you can buy an engagement ring. This guide will help you choose the perfect engagement rings for women.
❼❷⓿❺❻❷❽❷❼❽ Dpboss Matka Result Satta Matka Guessing Satta Fix jodi Kalyan Fin...
❼❷⓿❺❻❷❽❷❼❽ Dpboss Matka Result Satta Matka Guessing Satta Fix jodi Kalyan Fin...❼❷⓿❺❻❷❽❷❼❽ Dpboss Kalyan Satta Matka Guessing Matka Result Main Bazar chart
❼❷⓿❺❻❷❽❷❼❽ Dpboss Matka Result Satta Matka Guessing Satta Fix jodi Kalyan Final ank Satta Matka Dpbos Final ank Satta Matta Matka 143 Kalyan Matka Guessing Final Matka Final ank Today Matka 420 Satta Batta Satta 143 Kalyan Chart Main Bazar Chart vip Matka Guessing Dpboss 143 Guessing Kalyan night Satta Matka Dpboss Matka Guessing Kalyan Chart Indian Matka Kalyan panel Chart
Satta Matka Dpboss Matka Guessing Kalyan Chart Indian Matka Kalyan panel Chart➒➌➎➏➑➐➋➑➐➐Dpboss Matka Guessing Satta Matka Kalyan Chart Indian Matka
SATTA MATKA SATTA FAST RESULT KALYAN TOP MATKA RESULT KALYAN SATTA MATKA FAST RESULT MILAN RATAN RAJDHANI MAIN BAZAR MATKA FAST TIPS RESULT MATKA CHART JODI CHART PANEL CHART FREE FIX GAME SATTAMATKA ! MATKA MOBI SATTA 143 spboss.in TOP NO1 RESULT FULL RATE MATKA ONLINE GAME PLAY BY APP SPBOSS2024-6-01-IMPACTSilver-Corp-Presentation.pdf
IMPACT Silver is a pure silver zinc producer with over $260 million in revenue since 2008 and a large 100% owned 210km Mexico land package - 2024 catalysts includes new 14% grade zinc Plomosas mine and 20,000m of fully funded exploration drilling.
Best Competitive Marble Pricing in Dubai - ☎ 9928909666
Stone Art Hub offers the best competitive Marble Pricing in Dubai, ensuring affordability without compromising quality. With a wide range of exquisite marble options to choose from, you can enhance your spaces with elegance and sophistication. For inquiries or orders, contact us at ☎ 9928909666. Experience luxury at unbeatable prices.
一比一原版(QMUE毕业证书)英国爱丁堡玛格丽特女王大学毕业证文凭如何办理
永久可查学历认证【微信：A575476】【(QMUE毕业证书)英国爱丁堡玛格丽特女王大学毕业证成绩单Offer】【微信：A575476】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：A575476】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：A575476】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
Zodiac Signs and Food Preferences_ What Your Sign Says About Your Taste
Know what your zodiac sign says about your taste in food! Explore how the 12 zodiac signs influence your culinary preferences with insights from MyPandit. Dive into astrology and flavors!
Innovative Uses of Revit in Urban Planning and Design
Discover innovative uses of Revit in urban planning and design, enhancing city landscapes with advanced architectural solutions. Understand how architectural firms are using Revit to transform how processes and outcomes within urban planning and design fields look. They are supplementing work and putting in value through speed and imagination that the architects and planners are placing into composing progressive urban areas that are not only colorful but also pragmatic.
Innovation Management Frameworks: Your Guide to Creativity & Innovation
Innovation Management Frameworks: Your Guide to Creativity & InnovationOperational Excellence Consulting
[To download this presentation, visit:
https://www.oeconsulting.com.sg/training-presentations]
This PowerPoint compilation offers a comprehensive overview of 20 leading innovation management frameworks and methodologies, selected for their broad applicability across various industries and organizational contexts. These frameworks are valuable resources for a wide range of users, including business professionals, educators, and consultants.
Each framework is presented with visually engaging diagrams and templates, ensuring the content is both informative and appealing. While this compilation is thorough, please note that the slides are intended as supplementary resources and may not be sufficient for standalone instructional purposes.
This compilation is ideal for anyone looking to enhance their understanding of innovation management and drive meaningful change within their organization. Whether you aim to improve product development processes, enhance customer experiences, or drive digital transformation, these frameworks offer valuable insights and tools to help you achieve your goals.
INCLUDED FRAMEWORKS/MODELS:
1. Stanford’s Design Thinking
2. IDEO’s Human-Centered Design
3. Strategyzer’s Business Model Innovation
4. Lean Startup Methodology
5. Agile Innovation Framework
6. Doblin’s Ten Types of Innovation
7. McKinsey’s Three Horizons of Growth
8. Customer Journey Map
9. Christensen’s Disruptive Innovation Theory
10. Blue Ocean Strategy
11. Strategyn’s Jobs-To-Be-Done (JTBD) Framework with Job Map
12. Design Sprint Framework
13. The Double Diamond
14. Lean Six Sigma DMAIC
15. TRIZ Problem-Solving Framework
16. Edward de Bono’s Six Thinking Hats
17. Stage-Gate Model
18. Toyota’s Six Steps of Kaizen
19. Microsoft’s Digital Transformation Framework
20. Design for Six Sigma (DFSS)
To download this presentation, visit:
https://www.oeconsulting.com.sg/training-presentations2022 Vintage Roman Numerals Men Rings
Discover timeless style with the 2022 Vintage Roman Numerals Men's Ring. Crafted from premium stainless steel, this 6mm wide ring embodies elegance and durability. Perfect as a gift, it seamlessly blends classic Roman numeral detailing with modern sophistication, making it an ideal accessory for any occasion.
https://rb.gy/usj1a2
How HR Search Helps in Company Success.pdf
HR search is critical to a company's success because it ensures the correct people are in place. HR search integrates workforce capabilities with company goals by painstakingly identifying, screening, and employing qualified candidates, supporting innovation, productivity, and growth. Efficient talent acquisition improves teamwork while encouraging collaboration. Also, it reduces turnover, saves money, and ensures consistency. Furthermore, HR search discovers and develops leadership potential, resulting in a strong pipeline of future leaders. Finally, this strategic approach to recruitment enables businesses to respond to market changes, beat competitors, and achieve long-term success.
The Genesis of BriansClub.cm Famous Dark WEb Platform
BriansClub.cm, a famous platform on the dark web, has become one of the most infamous carding marketplaces, specializing in the sale of stolen credit card data.
The Most Inspiring Entrepreneurs to Follow in 2024.pdf
In a world where the potential of youth innovation remains vastly untouched, there emerges a guiding light in the form of Norm Goldstein, the Founder and CEO of EduNetwork Partners. His dedication to this cause has earned him recognition as a Congressional Leadership Award recipient.
Ellen Burstyn: From Detroit Dreamer to Hollywood Legend | CIO Women Magazine
In this article, we will dive into the extraordinary life of Ellen Burstyn, where the curtains rise on a story that's far more attractive than any script.
Anny Serafina Love - Letter of Recommendation by Kellen Harkins, MS.
This letter, written by Kellen Harkins, Course Director at Full Sail University, commends Anny Love's exemplary performance in the Video Sharing Platforms class. It highlights her dedication, willingness to challenge herself, and exceptional skills in production, editing, and marketing across various video platforms like YouTube, TikTok, and Instagram.
Recently uploaded (20)
❼❷⓿❺❻❷❽❷❼❽ Dpboss Matka Result Satta Matka Guessing Satta Fix jodi Kalyan Fin...
❼❷⓿❺❻❷❽❷❼❽ Dpboss Matka Result Satta Matka Guessing Satta Fix jodi Kalyan Fin...
Satta Matka Dpboss Matka Guessing Kalyan Chart Indian Matka Kalyan panel Chart
Satta Matka Dpboss Matka Guessing Kalyan Chart Indian Matka Kalyan panel Chart
Best Competitive Marble Pricing in Dubai - ☎ 9928909666
Best Competitive Marble Pricing in Dubai - ☎ 9928909666
Zodiac Signs and Food Preferences_ What Your Sign Says About Your Taste
Zodiac Signs and Food Preferences_ What Your Sign Says About Your Taste
Innovative Uses of Revit in Urban Planning and Design
Innovative Uses of Revit in Urban Planning and Design
Innovation Management Frameworks: Your Guide to Creativity & Innovation
Innovation Management Frameworks: Your Guide to Creativity & Innovation
The Genesis of BriansClub.cm Famous Dark WEb Platform
The Genesis of BriansClub.cm Famous Dark WEb Platform
The Most Inspiring Entrepreneurs to Follow in 2024.pdf
The Most Inspiring Entrepreneurs to Follow in 2024.pdf
Ellen Burstyn: From Detroit Dreamer to Hollywood Legend | CIO Women Magazine
Ellen Burstyn: From Detroit Dreamer to Hollywood Legend | CIO Women Magazine
Anny Serafina Love - Letter of Recommendation by Kellen Harkins, MS.
Anny Serafina Love - Letter of Recommendation by Kellen Harkins, MS.
Automatic trolley
- 1. ECWAY TECHNOLOGIES IEEE PROJECTS & SOFTWARE DEVELOPMENTS OUR OFFICES @ CHENNAI / TRICHY / KARUR / ERODE / MADURAI / SALEM / COIMBATORE BANGALORE / HYDRABAD CELL: +91 98949 17187, +91 875487 1111 / 2111 / 3111 / 4111 / 5111 / 6111 / 8111 VISIT: www.ecwaytechnologies.com | www.ecwayprojects.com Mail to: ecwaytechnologies@gmail.com | ecwayembedded@gmail.com AUTOMATIC TROLLEY FOR MATERIAL HANDLING SYSTEM IN INDUSTRY SYNOPSIS Material handling equipment is all equipment that relates to the movement, storage, control and protection of materials, goods and products throughout the process of manufacturing, distribution, consumption and disposal. Material handling equipment is the mechanical equipment involved in the complete system. Material handling equipment is generally separated into four main categories: storage and handling equipment, engineered systems, industrial trucks, and bulk material handling. Over the last decade our world has changed dramatically due to the growing phenomenon of globalization and revolution in automation there is tremendous demand on companies to improve the quality and provide reliable delivery dates through effective and efficient coordination of production and distribution activities. Robotics has emerged as an enabling technology. An industrial robot is a reprogrammable multifunctional manipulator designed to move materials, parts, tools or special devices through variable programmed motion and performance of variety tasks. A robot recognizes the need for company to conserve resources while adding value to the product.
- 2. In this project we have been used electric motors and structure, power transmission system for material handling purpose.This trolley can be implanted on rough surface to carry material and drop at a specific area. loading weight Automatic for Automobile industry control unit path finding sensor wheel
- 3. ADVANTAGES This system determines the accurate position than the manual method. This system reduces the manufacturing lead time. This system eliminates the manual work. Highly accurate and more efficient. Compact and quick response. DISADVANTAGE Maintenance cost is higher Electronic system may failure at any time