This document provides information about Art Floor, a company that specializes in flooring solutions. It lists the company's address and contact information. It then summarizes the properties and features of various flooring options including PU concrete, epoxy, EPU, PU, ESD, and other flooring types. It provides details on characteristics like abrasion resistance, chemical resistance, flexibility, adhesion, and more. The document acts as an overview and specification sheet for Art Floor's flooring products and services.

1. WELCOME
Office Address -: Art floor Manisha Housing Society Sector 24 d/3,
Nigdi Pradhikaran, Pune-411044.
: 9689907152 / 8308771241 / 8379025574
: info@artfloor.co.in
: www.artfloor.co.in

2. Art Floor
floorings
unlimited

3. PU Concrete
Polyurethane concrete flooring
High abrasion resistance 
High impact and chemical
resistance 
Water-based and hence VOC
compliant
Short pot life 
Available in limited shade 
•
•
•
•
•

4. EPOXY FLOORINGS
Cipoxy series represent products based on Bisphenol A based epoxide resin and
curing agents like polyamido amines and cyclo aliphatic amines.
Features :
•
•
•
•
•
•
•
Excellent adhesion
Excellent gloss, unmatched so far
Self leveling properties
Good chemical resistance
Food grade, tested at CFTRI, Mysore
Suitable for pharma & food processing industries
Moisture insensitive

5. EPU FLOORINGS
The new generation EPU based floor toppings offer excellent abrasion resistance,
flexibility, chemical resistance and fast curing properties. EPU is a multi polymer,
hybrid of epoxy and PU, where the functional properties of both the products are
combined to impart the optimum properties. It scores over conventional epoxies as
well as polyurethanes in terms of performance. Its end use applications include
automobile plants, pharma, food processing industries, chemical plants etc.
Features :
•
•
•
•
•
•
•
•
Excellent adhesion
Insensitive to moisture
Highly flexible
Excellent abrasion and impact resistance
Excellent gloss and self levelling properties
Good chemical resistance. No cracks on joints
Flexo hard and Fast setting
No bubbles

6. PU FLOORINGS
The PU coatings, aromatic as well as aliphatic to give the best abrasion and
chemical resistant coatings. These are reaction products of NCO terminated
adducts and OH terminated polyols like polyesters and polyethers.
Features :
•
•
•
•
•
•
•
Excellent abrasion resistance
Excellent chemical resistance
Excellent impact resistance
Available in matt finishes
Suitable for engg industries
Suitable as CRF (chemical resistant floorings)
Sensitive to moisture

7. ESD FLOORINGS
Static control flooring is defined as a flooring
charges by grounding personnel, equipment or
floor surface or that controls the generation
system that can drain static
other objects contacting the
and accumulation of static
charges. There are two categories according to ASTM F-150-98 : Conductive &
Static dissipative.
 Conductive Floor has a resistance of 2.5 x 104–106 ohms per 3 ft. It can drain
static charge dissipating a 5000-volt charge to zero in 0.05 seconds.
 Static Dissipative floor has a resistance of 106-109 ohms per 3 ft. It can drain
static charge dissipating a 5000- volt charge to zero in less than 0.2 seconds.

8. ESD FLOORINGS - advantages
•
•
•
•
•
•
•
•
Higher mechanical properties than concrete.
Durable.
Constant level of conductivity.
Low maintenance.
Superior chemical resistance.
Seamless.
Available in attractive shades.
Available in conductive and static-dissipative
forms.
Meets EOS/ESD standard 7.1 or NFPA 99 A
guide.
•

9. Weight loss after 1000 Cycles :
Abrasion resistance (wear & tear)
1 kg load, 1000 revolutions, CS17 wheel
Epoxy floorings 70 – 75 mg loss
EPU floorings 30 – 40 mg loss
PU floorings 20 – 30 mg loss
EP-PU floorings 10 – 15 mg loss
ESD floorings 30 – 40 mg loss
PU concrete floorings 65 – 70 mg loss
Green floors 140-150 mg loss
Poly aspartic floorings 50 – 55 mg loss
One-day floorings 50 – 55 mg loss
Densi Polished floors ---
Deck coatings ---

10. Dirt can easily be rem
Dust proof
oved by normal dry or wet cleaning.
Epoxy floorings Yes
EPU floorings Yes
PU floorings Yes
EP-PU floorings Yes
ESD floorings Yes
PU concrete floorings Yes
Green floors Yes
Poly aspartic floorings Yes
One-day floorings Yes
Densi Polished floors Yes
Deck coatings Yes

11. Chemical resistance
Epoxy floorings Good
EPU floorings Good
PU floorings Very good
EP-PU floorings Fair
ESD floorings Good
PU concrete floorings Very good
Green floors Fair
Poly aspartic floorings Good
One-day floorings Very Good
Densi Polished floors Poor
Deck coatings Good
Cipoxy EPN Excellent