The document describes two 1-part RTV silicone conformal coatings, 1C49LVF and 1C49HVF, designed to protect electronics from moisture and the environment. 1C49LVF has a viscosity of 500 cps and is UL recognized with a V-0 flammability rating and thermal index of 140°C. 1C49HVF has a higher viscosity of 34,000 cps and can withstand high temperatures. Both cure within 10 minutes and provide clear finishes for inspection. The coatings protect sensitive components, cure with ambient moisture, and offer benefits like ease of use and compatibility with automated dispensing systems. Surface cleanliness and proper coating thickness are important for avoiding problems during processing.
1B58 is a new synthetic rubber-based conformal coating from HumiSeal that can operate at temperatures up to 140C. It is a one-part system that is solvent-based, easy to apply and rework, and fluoresces under UV light. 1B58 has properties like increased temperature stability, flexibility, adhesion, moisture resistance, and fungus resistance that make it suitable for coating electronic components with long service lives.
Conformal Coatings and the Impact of VOC and Reach LegislationLee Hitchens
The impact of VOC and Reach Legislation on conformal coatings and conformal coating processing and equipment cannot be underestimated.
Humiseal and SCH are working very closely with the legislation to ensure customers meet the requirements.
This document provides an overview of conformal coatings, including what they are, why they are used, common types, and how to select, apply, and test them. Conformal coatings are thin protective films that conform to electronic circuit assemblies to provide moisture, heat, corrosion and other environmental protections. They are available in acrylic, epoxy, polyurethane, silicone and other types, and can be applied through brushing, dipping, spraying or other methods. Proper surface cleaning and achieving the recommended coating thickness are important to avoid application issues.
Conformal Coating is applied to circuit cards to provide a dielectric layer on an electronic board. This layer functions as a membrane between the board and the environment. With this coating in place, the circuit card can withstand more moisture by increasing the surface resistance or surface insulation resistance (SIR). With a higher SIR board, the risk of problems such as cross talk, electrical leakage, intermittent signal losses, and shorting is reduced.
This reduction in moisture will also help to reduce metallic growth called dendrites and corrosion or oxidation. Conformal coating will also serve to shield a circuit card from dust, dirt and pollutants that can carry moisture and may be acidic or alkaline.
There are several types of conformal coating materials and the selection of one for your application must consider several variables. Silicones, polyurethanes, acrylics, epoxies and some of the newer hydrophilic materials offer many options to the user. However, the incorrect selection can result in huge problems with your CCA. For example, if you use silicone as your conformal coating material in a high sulfur environment, the silicone absorbs the sulfur and enhances the probability of silver migration on chip resistors and other forms of corrosion.
The document discusses different types of conformal coatings, their properties and applications. It defines conformal coating as a thin protective plastic film that conforms to an electronic circuit board. The main types covered are acrylics, polyurethanes, epoxies, silicones and fluorocarbons. Acrylics are most common due to their low cost and ease of application, while silicones are suitable for high temperature uses. Key factors in selecting a coating include chemical resistance, temperature tolerance, and ease of application and repair.
Troubleshooting Your Humiseal Conformal Coating ProcessLee Hitchens
This document discusses common defects that can occur with conformal coatings, including capillary flow, de-wetting, delamination, cracking, corrosion, orange peel, and bubbles. It provides the root causes and solutions for each defect to help troubleshoot conformal coating process failures and prevent issues from reoccurring. Understanding the coating type, application method, curing process, and full coating process is important to identify the root cause of defects.
The document describes two 1-part RTV silicone conformal coatings, 1C49LVF and 1C49HVF, designed to protect electronics from moisture and the environment. 1C49LVF has a viscosity of 500 cps and is UL recognized with a V-0 flammability rating and thermal index of 140°C. 1C49HVF has a higher viscosity of 34,000 cps and can withstand high temperatures. Both cure within 10 minutes and provide clear finishes for inspection. The coatings protect sensitive components, cure with ambient moisture, and offer benefits like ease of use and compatibility with automated dispensing systems. Surface cleanliness and proper coating thickness are important for avoiding problems during processing.
1B58 is a new synthetic rubber-based conformal coating from HumiSeal that can operate at temperatures up to 140C. It is a one-part system that is solvent-based, easy to apply and rework, and fluoresces under UV light. 1B58 has properties like increased temperature stability, flexibility, adhesion, moisture resistance, and fungus resistance that make it suitable for coating electronic components with long service lives.
Conformal Coatings and the Impact of VOC and Reach LegislationLee Hitchens
The impact of VOC and Reach Legislation on conformal coatings and conformal coating processing and equipment cannot be underestimated.
Humiseal and SCH are working very closely with the legislation to ensure customers meet the requirements.
This document provides an overview of conformal coatings, including what they are, why they are used, common types, and how to select, apply, and test them. Conformal coatings are thin protective films that conform to electronic circuit assemblies to provide moisture, heat, corrosion and other environmental protections. They are available in acrylic, epoxy, polyurethane, silicone and other types, and can be applied through brushing, dipping, spraying or other methods. Proper surface cleaning and achieving the recommended coating thickness are important to avoid application issues.
Conformal Coating is applied to circuit cards to provide a dielectric layer on an electronic board. This layer functions as a membrane between the board and the environment. With this coating in place, the circuit card can withstand more moisture by increasing the surface resistance or surface insulation resistance (SIR). With a higher SIR board, the risk of problems such as cross talk, electrical leakage, intermittent signal losses, and shorting is reduced.
This reduction in moisture will also help to reduce metallic growth called dendrites and corrosion or oxidation. Conformal coating will also serve to shield a circuit card from dust, dirt and pollutants that can carry moisture and may be acidic or alkaline.
There are several types of conformal coating materials and the selection of one for your application must consider several variables. Silicones, polyurethanes, acrylics, epoxies and some of the newer hydrophilic materials offer many options to the user. However, the incorrect selection can result in huge problems with your CCA. For example, if you use silicone as your conformal coating material in a high sulfur environment, the silicone absorbs the sulfur and enhances the probability of silver migration on chip resistors and other forms of corrosion.
The document discusses different types of conformal coatings, their properties and applications. It defines conformal coating as a thin protective plastic film that conforms to an electronic circuit board. The main types covered are acrylics, polyurethanes, epoxies, silicones and fluorocarbons. Acrylics are most common due to their low cost and ease of application, while silicones are suitable for high temperature uses. Key factors in selecting a coating include chemical resistance, temperature tolerance, and ease of application and repair.
Troubleshooting Your Humiseal Conformal Coating ProcessLee Hitchens
This document discusses common defects that can occur with conformal coatings, including capillary flow, de-wetting, delamination, cracking, corrosion, orange peel, and bubbles. It provides the root causes and solutions for each defect to help troubleshoot conformal coating process failures and prevent issues from reoccurring. Understanding the coating type, application method, curing process, and full coating process is important to identify the root cause of defects.
UV40 Gel is a new high viscosity UV curable gel conformal coating formulated to provide the same levels of moisture and chemical protection as Humiseal's current UV40 product range. It is designed to be compatible with their suite of UV40 materials. UV40 Gel is a no slump gel suitable for dam and fill applications to prevent wicking. It offers the benefits of dual UV and moisture cure, strong chemical resistance, compatibility with traditional UV40 coatings, and ease of automated or semi-manual application.
Radiation-Cured Components & Their Use in Hard, Scratch Resistant Coating App...Sartomer
This presentation covers the following topics:
- Current and potential hard coat applications
- Description of products tested and their attributes
- Taber haze and Taber abrasion resistance
- Weathering resistance
- Barrier properties of a typical hard coat formulation
- Polyurethane dispersion products (PUDs)
You can visit Sartomer at Sartomer.com and follow them on Twitter @SartomerGlobal and on LinkedIn.
This document provides information on epoxy and acrylate-based UV curing adhesives from Epoxy Technology Inc. It discusses the benefits of their epoxy-based systems including excellent adhesion, low shrinkage, ability to cure in shadows, and the option for thermal post-curing. Tables show recommended UV lamp types and curing times for different adhesive products. Examples of applications include fiber optic assembly, glob top encapsulation, and optical packaging.
VIP Polyurea Germany is a leading high quality polyurea manufacturer in Europe. Their products are excellent & application team is quite experienced...Must see the PPT
The document describes silicone material 1C63, which is a dual-cure silicone designed for electrical insulation applications. It has a viscosity of 3500 +/- 1500 cps, cures with UV irradiation of 1-5 J/cm2 followed by a secondary moisture cure, and provides protection up to 250 mils thick with good elongation, tensile strength, and high volume resistivity. It is a one-part material that applies and cures easily for both manual and automated processes.
Water-based UV coatings cured with LED systems offer several advantages over mercury lamp systems, including being more environmentally friendly and allowing curing of heat-sensitive substrates. However, oxygen inhibition can reduce curing depth and conversion rates for some systems. Using phosphine oxide photoinitiators and minimizing oxygen penetration through physical drying of dispersions can help overcome this. New thiol-modified chemistries also show promise for oxygen inhibition-free curing and shadow area cure. Proper selection of photoinitiator and coating type are important to realize the full benefits of LED curing for water-based UV systems.
High-Performance UV-Curable PUDs With High Renewable Carbon ContentSartomer
This presentation addresses the use of UV-curable polyurethane dispersions for sustainable coatings. Features, properties, effects and project conclusions are discussed. For more information, please visit www.sartomer.com or follow Sartomer on Twitter @SartomerGlobal. Thanks for viewing!
The document summarizes the development history of Ultra-Ever Shield, a durable omni-repellent fabric coating. It describes how the coating was developed over 6 years and $2 million in funding to create a self-cleaning uniform for the Army. Testing showed the coating provided highly repellent and durable properties, resisting water, oil, and debris while maintaining performance after numerous washes. The coating was then licensed for commercial production in 2013.
This document provides an overview of UV ink, including:
- The components of UV inks and the curing process using ultraviolet light.
- The benefits of UV ink such as fast drying, versatility, and lack of VOCs.
- The various substrates and printing applications used for UV inks.
- Factors that influence UV curing efficiency and common equipment used such as lamps, reflectors, and rollers.
- Testing, storage, and troubleshooting considerations for UV ink printing.
The document provides an overview of the induction training process at Universal M/C's Limited. It describes the anodizing and powder coating processes, including bath chemistry, temperatures, immersion times and functions. It also discusses jigging, inspection of anodized materials, defects, standards, dye and spot testing. Other sections cover fabrication processes like cutting, milling, drilling and piercing. The importance of dies for piercing solar frames is explained. Finally, it describes how aluminum extrusion can be used to create frameworks to support solar panels.
Sphera Star T Homojen PVC Zemin Kaplama - Anıl Zemin MarketBurak Yıldız
This document provides specifications for the Sphera StarT homogeneous vinyl flooring product. Some key details include:
- It is a 2mm thick flooring made of high density PVC with a reinforced PUR coating, available in roll widths of 2m up to lengths of 20m.
- It meets the standards for very heavy commercial and heavy industrial use and has excellent durability properties like high abrasion resistance, low indentation, and dimensional stability.
- The reinforced PUR surface resists scratches and dirt well and is easy to clean, maintaining hygienic floors. It has very low VOC emissions.
- It is phthalate-free and helps create a healthy indoor environment. The
Dual cure chemistry (DCC) is a new coating technology that combines the benefits of physical drying, chemical curing, and moisture curing. It provides thin film protection, fast curing within 30 minutes, high gloss retention, quick water resistance, longer recoat intervals, low VOC emissions, and high durability. DCC coatings from PoluRan and UniBar offer superior adhesion, abrasion resistance, flexibility, corrosion resistance, and chemical resistance. They allow for application in a wide temperature range and require less maintenance due to their long-lasting performance.
This document lists various maintenance, repair and overhaul consumables for passive fire protection systems and epoxy coatings. It includes cleaners, insulation and protective coatings, fire protection systems, metal rebuilding and repair epoxies, sealants, and other maintenance products. Specific products are highlighted along with their features, benefits and applications. A wide range of cleaning, coating, sealing and repair materials are provided to suit various industrial maintenance needs.
Ruisen ®hvic high voltageinsulatorcoatingjamie cai
the HVIC RTV hydrophobic silicone coating designed for preventing flash-over tracking and current leakage,which has good water repellency and anti-wheather properties.it can be coated on porcelain,ceramic ,glass insulator and instrument transformer bushing
The document describes hot applied, hot cured ultra high build epoxy coatings called Interzone 954XS and Sigmasheild 880XS. It discusses their automatic application process which includes blasting, pre-heating steel, overlapping spray application and post curing to achieve full hardness in 10 minutes. The coatings provide improved performance through a LongKey process and have a track record of protecting structures for 15 years.
"Utilizing UV Curing in Decorating Plastic Substrates 101" presented by Steve Hatkevich, Director of R&D, American Trim LLC at RadTech UV & EB Technology Expo & Conference 2014. To learn more about UV & EB curing, visit http://www.radtech.org.
Transparent aluminum, also known as aluminum oxynitride, is a man-made transparent ceramic material. It is manufactured through a powder processing technique that involves packing aluminum oxynitride powder into a mold, pressing it, and heating it to fuse it together. The resulting material is crystal clear, extremely hard, durable, and able to transmit light similarly to glass. It has a variety of potential military and commercial applications due to its optical clarity and ballistic resistance.
New products- What's new inside the machine? Humiseal®
UV40 Solar
UV40 SOLAR is the next product extension HumiSeal brings to the industry
Formulated to give high stability to UV light – suitable for outdoor use tested to SAE J-1960 (accelerated Q-UV). Ideal for photovoltaic applications.
UV SOLAR possesses chemical resistance which is ideally suited also for white goods applications
New products - What's new inside the machine? Humiseal®
UV40 Gel
UV40 GEL is a new high viscosity UV curable gel product
Formulated to provide same levels of moisture and chemical protection as current UV40 product range
Designed to be compatible with the HumiSeal suite of UV40 materials
Sunpreme is a solar panel manufacturer that was founded in 2009 and has since expanded to 250 employees worldwide. It produces high-efficiency bifacial solar panels in various sizes from 60 to 96 cells that achieve power outputs from 310W to 510W. Sunpreme validates its panels on five continents and has sold over 40MW of panels. It is committed to delivering the most reliable solar products in the industry through rigorous testing and quality control programs.
PV Option 4- Canadian Solar Max Power data sheetcathexis123
This document provides specifications for the MaxPower CS6X series of solar modules from Canadian Solar. The CS6X modules are robust, all-purpose modules that use 72 mono or multi-crystalline solar cells. They are designed for on-grid solar applications and provide high power output and performance over 25 years. Key features include industry-leading power output, mechanical load resistance, and a comprehensive 25-year warranty and insurance.
What's new inside the machine - New productHumiseal®
This document provides information on two 1-part RTV silicone conformal coatings, 1C49LVF and 1C49HVF, from Humiseal. 1C49LVF has a viscosity of 500 +/- 250 cps and is intended for easy application by dipping or brushing. 1C49HVF has a higher viscosity of 34,000 +/- 6,000 cps and is intended for application by syringe or brushing. Both coatings cure in under 10 minutes at room temperature and provide protection from moisture and environmental factors for electronics.
UV40 Gel is a new high viscosity UV curable gel conformal coating formulated to provide the same levels of moisture and chemical protection as Humiseal's current UV40 product range. It is designed to be compatible with their suite of UV40 materials. UV40 Gel is a no slump gel suitable for dam and fill applications to prevent wicking. It offers the benefits of dual UV and moisture cure, strong chemical resistance, compatibility with traditional UV40 coatings, and ease of automated or semi-manual application.
Radiation-Cured Components & Their Use in Hard, Scratch Resistant Coating App...Sartomer
This presentation covers the following topics:
- Current and potential hard coat applications
- Description of products tested and their attributes
- Taber haze and Taber abrasion resistance
- Weathering resistance
- Barrier properties of a typical hard coat formulation
- Polyurethane dispersion products (PUDs)
You can visit Sartomer at Sartomer.com and follow them on Twitter @SartomerGlobal and on LinkedIn.
This document provides information on epoxy and acrylate-based UV curing adhesives from Epoxy Technology Inc. It discusses the benefits of their epoxy-based systems including excellent adhesion, low shrinkage, ability to cure in shadows, and the option for thermal post-curing. Tables show recommended UV lamp types and curing times for different adhesive products. Examples of applications include fiber optic assembly, glob top encapsulation, and optical packaging.
VIP Polyurea Germany is a leading high quality polyurea manufacturer in Europe. Their products are excellent & application team is quite experienced...Must see the PPT
The document describes silicone material 1C63, which is a dual-cure silicone designed for electrical insulation applications. It has a viscosity of 3500 +/- 1500 cps, cures with UV irradiation of 1-5 J/cm2 followed by a secondary moisture cure, and provides protection up to 250 mils thick with good elongation, tensile strength, and high volume resistivity. It is a one-part material that applies and cures easily for both manual and automated processes.
Water-based UV coatings cured with LED systems offer several advantages over mercury lamp systems, including being more environmentally friendly and allowing curing of heat-sensitive substrates. However, oxygen inhibition can reduce curing depth and conversion rates for some systems. Using phosphine oxide photoinitiators and minimizing oxygen penetration through physical drying of dispersions can help overcome this. New thiol-modified chemistries also show promise for oxygen inhibition-free curing and shadow area cure. Proper selection of photoinitiator and coating type are important to realize the full benefits of LED curing for water-based UV systems.
High-Performance UV-Curable PUDs With High Renewable Carbon ContentSartomer
This presentation addresses the use of UV-curable polyurethane dispersions for sustainable coatings. Features, properties, effects and project conclusions are discussed. For more information, please visit www.sartomer.com or follow Sartomer on Twitter @SartomerGlobal. Thanks for viewing!
The document summarizes the development history of Ultra-Ever Shield, a durable omni-repellent fabric coating. It describes how the coating was developed over 6 years and $2 million in funding to create a self-cleaning uniform for the Army. Testing showed the coating provided highly repellent and durable properties, resisting water, oil, and debris while maintaining performance after numerous washes. The coating was then licensed for commercial production in 2013.
This document provides an overview of UV ink, including:
- The components of UV inks and the curing process using ultraviolet light.
- The benefits of UV ink such as fast drying, versatility, and lack of VOCs.
- The various substrates and printing applications used for UV inks.
- Factors that influence UV curing efficiency and common equipment used such as lamps, reflectors, and rollers.
- Testing, storage, and troubleshooting considerations for UV ink printing.
The document provides an overview of the induction training process at Universal M/C's Limited. It describes the anodizing and powder coating processes, including bath chemistry, temperatures, immersion times and functions. It also discusses jigging, inspection of anodized materials, defects, standards, dye and spot testing. Other sections cover fabrication processes like cutting, milling, drilling and piercing. The importance of dies for piercing solar frames is explained. Finally, it describes how aluminum extrusion can be used to create frameworks to support solar panels.
Sphera Star T Homojen PVC Zemin Kaplama - Anıl Zemin MarketBurak Yıldız
This document provides specifications for the Sphera StarT homogeneous vinyl flooring product. Some key details include:
- It is a 2mm thick flooring made of high density PVC with a reinforced PUR coating, available in roll widths of 2m up to lengths of 20m.
- It meets the standards for very heavy commercial and heavy industrial use and has excellent durability properties like high abrasion resistance, low indentation, and dimensional stability.
- The reinforced PUR surface resists scratches and dirt well and is easy to clean, maintaining hygienic floors. It has very low VOC emissions.
- It is phthalate-free and helps create a healthy indoor environment. The
Dual cure chemistry (DCC) is a new coating technology that combines the benefits of physical drying, chemical curing, and moisture curing. It provides thin film protection, fast curing within 30 minutes, high gloss retention, quick water resistance, longer recoat intervals, low VOC emissions, and high durability. DCC coatings from PoluRan and UniBar offer superior adhesion, abrasion resistance, flexibility, corrosion resistance, and chemical resistance. They allow for application in a wide temperature range and require less maintenance due to their long-lasting performance.
This document lists various maintenance, repair and overhaul consumables for passive fire protection systems and epoxy coatings. It includes cleaners, insulation and protective coatings, fire protection systems, metal rebuilding and repair epoxies, sealants, and other maintenance products. Specific products are highlighted along with their features, benefits and applications. A wide range of cleaning, coating, sealing and repair materials are provided to suit various industrial maintenance needs.
Ruisen ®hvic high voltageinsulatorcoatingjamie cai
the HVIC RTV hydrophobic silicone coating designed for preventing flash-over tracking and current leakage,which has good water repellency and anti-wheather properties.it can be coated on porcelain,ceramic ,glass insulator and instrument transformer bushing
The document describes hot applied, hot cured ultra high build epoxy coatings called Interzone 954XS and Sigmasheild 880XS. It discusses their automatic application process which includes blasting, pre-heating steel, overlapping spray application and post curing to achieve full hardness in 10 minutes. The coatings provide improved performance through a LongKey process and have a track record of protecting structures for 15 years.
"Utilizing UV Curing in Decorating Plastic Substrates 101" presented by Steve Hatkevich, Director of R&D, American Trim LLC at RadTech UV & EB Technology Expo & Conference 2014. To learn more about UV & EB curing, visit http://www.radtech.org.
Transparent aluminum, also known as aluminum oxynitride, is a man-made transparent ceramic material. It is manufactured through a powder processing technique that involves packing aluminum oxynitride powder into a mold, pressing it, and heating it to fuse it together. The resulting material is crystal clear, extremely hard, durable, and able to transmit light similarly to glass. It has a variety of potential military and commercial applications due to its optical clarity and ballistic resistance.
New products- What's new inside the machine? Humiseal®
UV40 Solar
UV40 SOLAR is the next product extension HumiSeal brings to the industry
Formulated to give high stability to UV light – suitable for outdoor use tested to SAE J-1960 (accelerated Q-UV). Ideal for photovoltaic applications.
UV SOLAR possesses chemical resistance which is ideally suited also for white goods applications
New products - What's new inside the machine? Humiseal®
UV40 Gel
UV40 GEL is a new high viscosity UV curable gel product
Formulated to provide same levels of moisture and chemical protection as current UV40 product range
Designed to be compatible with the HumiSeal suite of UV40 materials
Sunpreme is a solar panel manufacturer that was founded in 2009 and has since expanded to 250 employees worldwide. It produces high-efficiency bifacial solar panels in various sizes from 60 to 96 cells that achieve power outputs from 310W to 510W. Sunpreme validates its panels on five continents and has sold over 40MW of panels. It is committed to delivering the most reliable solar products in the industry through rigorous testing and quality control programs.
PV Option 4- Canadian Solar Max Power data sheetcathexis123
This document provides specifications for the MaxPower CS6X series of solar modules from Canadian Solar. The CS6X modules are robust, all-purpose modules that use 72 mono or multi-crystalline solar cells. They are designed for on-grid solar applications and provide high power output and performance over 25 years. Key features include industry-leading power output, mechanical load resistance, and a comprehensive 25-year warranty and insurance.
What's new inside the machine - New productHumiseal®
This document provides information on two 1-part RTV silicone conformal coatings, 1C49LVF and 1C49HVF, from Humiseal. 1C49LVF has a viscosity of 500 +/- 250 cps and is intended for easy application by dipping or brushing. 1C49HVF has a higher viscosity of 34,000 +/- 6,000 cps and is intended for application by syringe or brushing. Both coatings cure in under 10 minutes at room temperature and provide protection from moisture and environmental factors for electronics.
The document discusses KEMET's EMI film capacitors and DC link film capacitors. It provides an overview of their purpose, features, applications, and key product lines. The F862 and F863 EMI film capacitors offer improved stability and safety for noise filtering applications even under harsh conditions. The C4AE and C4AQ boxed DC link capacitors are designed for applications like motor drives, inverters, and electric vehicles due to their long lifetime, stability, and AEC-Q200 qualification.
This document provides information on Huntsman Advanced Materials' insulation solutions for various applications in electrical engineering, including generators and motors, insulators and bushings, switchgears, and dry-type distribution transformers. It describes product lines such as Araldite and Aradur casting and impregnation systems, highlighting their key properties like thermal resistance, flame retardancy, mechanical strength, and chemical resistance. Tables provide details on specific product formulations, their characteristics and recommended manufacturing processes. The document aims to demonstrate Huntsman's expertise and solutions for meeting stringent electrical engineering insulation requirements.
The document discusses KEMET's EMI film capacitors and DC link film capacitors for various applications. It provides an overview of EMI capacitors and their purpose in noise filtering. It then focuses on KEMET's heavy duty F862 and F863 series that offer improved stability and safety performance for harsh environments. The document also introduces KEMET's C4AE and C4AQ boxed DC link capacitors that provide long life and stability up to 105°C, with C4AQ offering additional AEC-Q200 qualification. Common applications discussed include motor drives, inverters, electric vehicles, and charging stations.
The document provides information on Trina Solar's 60-cell multicrystalline photovoltaic modules. The modules have a maximum power output ranging from 270-285W, power density up to 174W/m2, and maximum efficiency of 17.4%. Trina Solar provides a 10-year product warranty and 25-year linear power warranty, guaranteeing at least 97.5% of the module's original output after 25 years. Additional information includes the module's electrical and mechanical specifications, testing and certification compliance, as well as packaging details.
New products-What's new inside the machine? Humiseal®
Silicone 1C63:
A dual cure silicone material specifically developed for electrical insulation applications
UL recognized, one part material, designed for manual and automated dispensing systems
Fast processing and eliminates shadow area concerns with secondary moisture cure
New products-What's new inside the machine?Humiseal®
A dual-cure silicone material specifically developed for electrical insulation applications
UL recognized, one part material, designed for manual and automated dispensing systems
Fast processing and eliminates shadow area concerns with secondary moisture cure
This document provides specifications for Jinko Solar's JKM260P-60 polycrystalline solar photovoltaic module. The module is IEC certified and produces 260 watts of power with a conversion efficiency of up to 15.89%. It has 60 polycrystalline solar cells, measures 1650x992x45mm, and weighs 19.0kg. The module comes with a 10-year warranty on materials and workmanship and 12-25 year linear performance warranty.
The document describes the AOK iR Series LED Recessed Canopy Light. It has a simplistic and recessed design specialized for gas stations. It provides high luminous efficacy up to 130lm/w and long lifespan over 62,000 hours. It uses reliable LED technology and has excellent heat dissipation to control temperature, ensuring long performance. It comes with an 8-year warranty and is available in various wattages and sizes to replace common HID canopy lights.
High-Performance Materials for Laminating AdhesivesSartomer
This document discusses laminating adhesives and evaluates new oligomer materials for these applications. It examines UV/EB curable laminating adhesive formulations containing oligomers, monomers, and photoinitiators. Testing of various oligomers shows that polyester and polycarbonate urethane acrylate materials like NTX12514 and PRO12546 maintain high optical clarity and bond strength after weathering, making them suitable for laminating adhesives requiring durability. Polyether urethane acrylates provide weaker bonding but better retention of properties after aging. Material selection depends on the specific performance needs of laminating adhesive applications.
AOK iR Series LED Canopy Light & Recessed Gas Station Light DatasheetBonnie Lin
The document describes the AOK iR Series LED recessed canopy lights for gas stations. Key features include a simplistic and recessed design optimized for gas stations, luminous efficacy up to 130lm/w and lifespan over 62,000 hours, and models ranging from 80W to 160W output to replace common HID canopy lights. The lights use reliable LED technology and precision temperature control to ensure long lifetime even in varying outdoor conditions.
This document summarizes the specifications of three solar panels from Suunny: the SM280D, SM270D, and SM260D. The panels have high conversion efficiencies and reliability due to innovative photovoltaic technologies. They come with a 25-year power output warranty that is 6.7% higher than industry standards. The panels are suitable for on-grid utility systems, on-grid commercial systems, and off-grid ground mounted systems.
This document provides specifications for a 72-cell polycrystalline solar photovoltaic module with a power output range of 320-340W and maximum efficiency of 17.5%. The module has a 10-year product warranty and 25-year linear power warranty, and meets various international standards. It provides high power output in a lightweight framed module suitable for large-scale solar installations.
The AOK i Series was designed to function as high/low bay lighting, flood lighting, and tunnel lighting for indoor and outdoor applications like warehouses, sports stadiums, and tunnels. It has high luminous efficacy up to 130lm/w and a long lifespan of over 62,000 hours. The LED light fixtures are available in various wattages from 40W to 280W and distribution options of 30, 60, 90x100, and 120 degrees. The i Series is designed for reliable and efficient performance with excellent heat dissipation and protection of the LED components.
This document summarizes the specifications of a 200W solar panel from Suunny's technology. The panel has an improved cell structure and anti-reflective coating that increase conversion efficiency. It provides higher power output through an advanced cell texturing and isolation process. The panel also has a unique frame design that prevents deformation or breaking during freezing weather. It comes with a 25-year power output warranty that is 6.7% higher than competitors.
This document summarizes the specifications of a 200W solar panel from Suunny's technology. The panel has an improved cell structure and anti-reflective coating that increase conversion efficiency. It provides higher power output through an advanced cell texturing and isolation process. The panel also has a unique frame design that prevents deformation or breaking during freezing weather. It comes with a 25-year power output warranty that is 6.7% higher than competitors.
Maruthi Prithivirajan, Head of ASEAN & IN Solution Architecture, Neo4j
Get an inside look at the latest Neo4j innovations that enable relationship-driven intelligence at scale. Learn more about the newest cloud integrations and product enhancements that make Neo4j an essential choice for developers building apps with interconnected data and generative AI.
Pushing the limits of ePRTC: 100ns holdover for 100 daysAdtran
At WSTS 2024, Alon Stern explored the topic of parametric holdover and explained how recent research findings can be implemented in real-world PNT networks to achieve 100 nanoseconds of accuracy for up to 100 days.
Climate Impact of Software Testing at Nordic Testing DaysKari Kakkonen
My slides at Nordic Testing Days 6.6.2024
Climate impact / sustainability of software testing discussed on the talk. ICT and testing must carry their part of global responsibility to help with the climat warming. We can minimize the carbon footprint but we can also have a carbon handprint, a positive impact on the climate. Quality characteristics can be added with sustainability, and then measured continuously. Test environments can be used less, and in smaller scale and on demand. Test techniques can be used in optimizing or minimizing number of tests. Test automation can be used to speed up testing.
Dr. Sean Tan, Head of Data Science, Changi Airport Group
Discover how Changi Airport Group (CAG) leverages graph technologies and generative AI to revolutionize their search capabilities. This session delves into the unique search needs of CAG’s diverse passengers and customers, showcasing how graph data structures enhance the accuracy and relevance of AI-generated search results, mitigating the risk of “hallucinations” and improving the overall customer journey.
“An Outlook of the Ongoing and Future Relationship between Blockchain Technologies and Process-aware Information Systems.” Invited talk at the joint workshop on Blockchain for Information Systems (BC4IS) and Blockchain for Trusted Data Sharing (B4TDS), co-located with with the 36th International Conference on Advanced Information Systems Engineering (CAiSE), 3 June 2024, Limassol, Cyprus.
In the rapidly evolving landscape of technologies, XML continues to play a vital role in structuring, storing, and transporting data across diverse systems. The recent advancements in artificial intelligence (AI) present new methodologies for enhancing XML development workflows, introducing efficiency, automation, and intelligent capabilities. This presentation will outline the scope and perspective of utilizing AI in XML development. The potential benefits and the possible pitfalls will be highlighted, providing a balanced view of the subject.
We will explore the capabilities of AI in understanding XML markup languages and autonomously creating structured XML content. Additionally, we will examine the capacity of AI to enrich plain text with appropriate XML markup. Practical examples and methodological guidelines will be provided to elucidate how AI can be effectively prompted to interpret and generate accurate XML markup.
Further emphasis will be placed on the role of AI in developing XSLT, or schemas such as XSD and Schematron. We will address the techniques and strategies adopted to create prompts for generating code, explaining code, or refactoring the code, and the results achieved.
The discussion will extend to how AI can be used to transform XML content. In particular, the focus will be on the use of AI XPath extension functions in XSLT, Schematron, Schematron Quick Fixes, or for XML content refactoring.
The presentation aims to deliver a comprehensive overview of AI usage in XML development, providing attendees with the necessary knowledge to make informed decisions. Whether you’re at the early stages of adopting AI or considering integrating it in advanced XML development, this presentation will cover all levels of expertise.
By highlighting the potential advantages and challenges of integrating AI with XML development tools and languages, the presentation seeks to inspire thoughtful conversation around the future of XML development. We’ll not only delve into the technical aspects of AI-powered XML development but also discuss practical implications and possible future directions.
UiPath Test Automation using UiPath Test Suite series, part 5DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 5. In this session, we will cover CI/CD with devops.
Topics covered:
CI/CD with in UiPath
End-to-end overview of CI/CD pipeline with Azure devops
Speaker:
Lyndsey Byblow, Test Suite Sales Engineer @ UiPath, Inc.
Unlocking Productivity: Leveraging the Potential of Copilot in Microsoft 365, a presentation by Christoforos Vlachos, Senior Solutions Manager – Modern Workplace, Uni Systems
HCL Notes and Domino License Cost Reduction in the World of DLAUpanagenda
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-and-domino-license-cost-reduction-in-the-world-of-dlau/
The introduction of DLAU and the CCB & CCX licensing model caused quite a stir in the HCL community. As a Notes and Domino customer, you may have faced challenges with unexpected user counts and license costs. You probably have questions on how this new licensing approach works and how to benefit from it. Most importantly, you likely have budget constraints and want to save money where possible. Don’t worry, we can help with all of this!
We’ll show you how to fix common misconfigurations that cause higher-than-expected user counts, and how to identify accounts which you can deactivate to save money. There are also frequent patterns that can cause unnecessary cost, like using a person document instead of a mail-in for shared mailboxes. We’ll provide examples and solutions for those as well. And naturally we’ll explain the new licensing model.
Join HCL Ambassador Marc Thomas in this webinar with a special guest appearance from Franz Walder. It will give you the tools and know-how to stay on top of what is going on with Domino licensing. You will be able lower your cost through an optimized configuration and keep it low going forward.
These topics will be covered
- Reducing license cost by finding and fixing misconfigurations and superfluous accounts
- How do CCB and CCX licenses really work?
- Understanding the DLAU tool and how to best utilize it
- Tips for common problem areas, like team mailboxes, functional/test users, etc
- Practical examples and best practices to implement right away
Goodbye Windows 11: Make Way for Nitrux Linux 3.5.0!SOFTTECHHUB
As the digital landscape continually evolves, operating systems play a critical role in shaping user experiences and productivity. The launch of Nitrux Linux 3.5.0 marks a significant milestone, offering a robust alternative to traditional systems such as Windows 11. This article delves into the essence of Nitrux Linux 3.5.0, exploring its unique features, advantages, and how it stands as a compelling choice for both casual users and tech enthusiasts.
Observability Concepts EVERY Developer Should Know -- DeveloperWeek Europe.pdfPaige Cruz
Monitoring and observability aren’t traditionally found in software curriculums and many of us cobble this knowledge together from whatever vendor or ecosystem we were first introduced to and whatever is a part of your current company’s observability stack.
While the dev and ops silo continues to crumble….many organizations still relegate monitoring & observability as the purview of ops, infra and SRE teams. This is a mistake - achieving a highly observable system requires collaboration up and down the stack.
I, a former op, would like to extend an invitation to all application developers to join the observability party will share these foundational concepts to build on:
Driving Business Innovation: Latest Generative AI Advancements & Success StorySafe Software
Are you ready to revolutionize how you handle data? Join us for a webinar where we’ll bring you up to speed with the latest advancements in Generative AI technology and discover how leveraging FME with tools from giants like Google Gemini, Amazon, and Microsoft OpenAI can supercharge your workflow efficiency.
During the hour, we’ll take you through:
Guest Speaker Segment with Hannah Barrington: Dive into the world of dynamic real estate marketing with Hannah, the Marketing Manager at Workspace Group. Hear firsthand how their team generates engaging descriptions for thousands of office units by integrating diverse data sources—from PDF floorplans to web pages—using FME transformers, like OpenAIVisionConnector and AnthropicVisionConnector. This use case will show you how GenAI can streamline content creation for marketing across the board.
Ollama Use Case: Learn how Scenario Specialist Dmitri Bagh has utilized Ollama within FME to input data, create custom models, and enhance security protocols. This segment will include demos to illustrate the full capabilities of FME in AI-driven processes.
Custom AI Models: Discover how to leverage FME to build personalized AI models using your data. Whether it’s populating a model with local data for added security or integrating public AI tools, find out how FME facilitates a versatile and secure approach to AI.
We’ll wrap up with a live Q&A session where you can engage with our experts on your specific use cases, and learn more about optimizing your data workflows with AI.
This webinar is ideal for professionals seeking to harness the power of AI within their data management systems while ensuring high levels of customization and security. Whether you're a novice or an expert, gain actionable insights and strategies to elevate your data processes. Join us to see how FME and AI can revolutionize how you work with data!
Communications Mining Series - Zero to Hero - Session 1DianaGray10
This session provides introduction to UiPath Communication Mining, importance and platform overview. You will acquire a good understand of the phases in Communication Mining as we go over the platform with you. Topics covered:
• Communication Mining Overview
• Why is it important?
• How can it help today’s business and the benefits
• Phases in Communication Mining
• Demo on Platform overview
• Q/A
Programming Foundation Models with DSPy - Meetup SlidesZilliz
Prompting language models is hard, while programming language models is easy. In this talk, I will discuss the state-of-the-art framework DSPy for programming foundation models with its powerful optimizers and runtime constraint system.
Programming Foundation Models with DSPy - Meetup Slides
New products UV40 Solar
1.
2. WWW.HUMISEAL.COM
• UV40 SOLAR is the next product extension
HumiSeal brings to the industry
• Formulated to give high stability to UV light –
suitable for outdoor use tested to SAE J-1960
(accelerated Q-UV). Ideal for photovoltaic
applications.
• UV SOLAR possesses chemical resistance
which is ideally suited also for white goods
applications
UV40 Solar
UV Curable
3. WWW.HUMISEAL.COM
Performance data
HumiSealUV40 Humiseal
UV40 SOLAR
HumiSeal UV40
250
HumiSeal UV40
HV
UV40 gel
Unique Features
The original UV cure Conformal
Coating, possessing excellent chemical
resistance, surface hardness, flexibility and
moisture resistance.
UV light stabilizer
Suitable for Outdoor application
without discoloration
Low viscosity
Version of UV40
Increased flexibility
High viscosity version of
UV40
No Slump gel suitable for
Dam/Fill
Suitable for needle jet
application
Viscosity, cps 500 to 800 500 to 800 250 to 350 2400 to 2800 No Slump Gel
Qualifications and
Standards
IPC-CC-830
MIL-I-46058C
UL94 V-0
RoHS Directive 2002/95/EC
SAE-J-1960 standard (QUV
accelerated age testing).
RoHS Directive 2002/95/EC
IPC-CC-830
V-0
RoHS Directive 2002/95/EC
RoHS Directive 2002/95/EC RoHS Directive
2002/95/EC
Specific gravity, g/cm3
1.00 to 1.10 1.00 to 1.10 1.05 to 1.15 1.05 to 1.15 1.00 to 1.10
Cure Type UV / secondary moisture cure
Cure condition
1-5 J/cm2 UV cure
Moisture develops full coating properties after 7 Days
Tack free time, min Immediately Following UV exposure
Moisture Insulation
Resistance
4.7 x 1010 Ohms
4. WWW.HUMISEAL.COM
UV40 Solar
Performance Data
• Density 1.06 g/cm3
• Minimum Solids Content 95 %
• Viscosity, per
Fed-Std-141, Meth. 4287 500-800
centipoise
• Recommended Coating
Thickness 25 - 125
microns
• Recommended UV Dose* 1 - 4 J/cm2
• Shelf Life at Room Temperature
from DOM 12 months
5. WWW.HUMISEAL.COM
UV40 Solar
Performance Data • Thermal Shock,
50 cycles per MIL-I-46058C -65 C to 125 C
• Glass Transition Temperature – DSC 45ºC
• Coefficient of Thermal Expansion
- TMA 85 ppm/ C below Tg
197 ppm/ C above Tg
• Modulus - DMA 10364 MPa @ -40 C
4283 MPa @ 25 C
66 MPa @ 80 C
• Dielectric Withstand Voltage, per MIL-I-46058C >1500 volts
• Dielectric Constant, at 1MHz and 25 C
per ASTM D150-98 2.5
• Dissipation Factor, at 1MHz and 25 C
per ASTM D150-98 0.01
• Insulation Resistance, per MIL-I-46058C 8.0 x 1014 ohms (800T)
• Moisture Insulation Resistance,
per MIL-I-46058C 4.7 x 1010 ohms (47G)
• Fungus Resistance, per ASTM G21 Pass
6. WWW.HUMISEAL.COM
UV40 Solar
Features & Benefits
• One-Part system
• Dual Cure UV and Moisture cure
Systems to provide tack free
coating
• UV blocking mechanism to
improve UV stability
• Strong chemical resistance
• Compatible with most dispensing
systems
• Fluoresces under UV light
7. WWW.HUMISEAL.COM
UV40 Solar
Features & Benefits
• Easy of Use
• Allow for rapid processing and
automation
• Suited for external as well as
internal applications exposed to
sunlight
• Suitable for aggressive
environments
• Ease of Implementation
• Ease of Optical Inspection