This document summarizes the products and services of ArmorThane, a manufacturer of polyurethane and polyurea coatings. It describes their various coating product lines including STS and HighLine coatings, ArmorFloor coatings for concrete, ArmorFoam spray foam insulation, and ArmorBlast blast mitigation coatings. It provides details on the characteristics and benefits of each product. It also discusses their equipment and customer service offerings to help customers apply the coatings effectively.

1. A leading manufacturer and supplier of
polyurethane and polyurea coatings and
application equipment.

2. For years, we’ve helped companies build
their business.
• Founded by Garry Froese, CEO, in 1989
• Specializing in the development and manufacturing of top-quality
polyurethane coatings, as well as the design and fabrication of
commercial application equipment
• Expanding product lines as extensive
new product research & development
opens the door to new market
applications
• Multiple product lines available to help
fulfill any specialty coating need
• Ongoing technical and product support

3. Coatings
Because no one product does it all,
ArmorThane develops products with specific
characteristics.
• STS™ Series
• HighLine™ Series
• ArmorFloor™
• ArmorFoam™
• ArmorBlast™

4. Durable
Tough
Flexible
STS™ & HighLine™
Series Coatings

5. Coatings
• STS™ & HighLine™ Series - toughest coatings available
o Selection of polyurethane and polyurea coatings to fit any task
o Withstands the harshest conditions from -80° F to +280° F
o Variety of hardness and elongation characteristics
o Stretches before breaking, allowing settling without cracking
o Water proof, resisting warping or corrosion
o Chemical resistant in corrosive or acidic conditions
o Much more durable than rubber
o Resists denting or scratching for an
attractive, easy-to-maintain surface
o Designed for spraying various
thicknesses from only 1/8” to 4”
depending on the application
o Large selection of colors

6. Unique Look for
Concrete
Easy to Clean
Chemical Resistant
ArmorFloor™

7. Coatings
• STS™ & HighLine™ - toughest coatings available
• ArmorFloor™ - resilient, tough liquid for concrete floors
o Permanent surface protection
o Unique and attractive look for concrete
o Easy-to-clean high gloss floor coating
o Stain and grime resistant
o Chemical resistant for years of endurance
o Withstands heat or cold variations
o Weathering and abrasion resistant
o Easy roll-on application
o Color chip or abrasives added for an interesting look

8. Energy Savings
Healthier Environment
Structural Protection
ArmorFoam™

9. Coatings
• STS™ & HighLine™ - toughest coatings available
• ArmorFloor™ - resilient, tough liquid for concrete floors
• ArmorFoam™ - for maximum protection against the elements
o Energy savings for lower utility costs with one of the highest R-Values
o Sprayed insulation starting as a two-component, closed-cell
polyurethane liquid that forms a rigid foam
o Stronger walls and roof
o Extended life for structures and protect against wind damage
o No air or moisture leaks; leak proof to prevent water damage and mold
o No settling
o Noise reduction from outside and between rooms
o Specifically designed for new structures but also works well for sealing
existing foundations, pipes, attic ceilings and walls, and the underside
of flooring accessed from crawl spaces

10. ArmorFoam™
ArmorFoam Benefits*
ArmorFoam
Spray
Polyurethane
Glass Fiber
Batts Or
Blown-In
Cellulose
R-value of 6 per inch or better X
Lowers utility costs by 20%-40% X
Minimizes chance of mold and mildew by
forming a seamless air barrier that blocks
moisture
X
Prevents leaks when applied seamlessly X
Reduces noise better than others X
Adds protective strength to walls and roofs X
Stays put with no settling X
Enhances resale value X
*Benefits are for a
minimum 2”
application.
Because R-value is
based on air
movement and
ArmorFoam 2.0
prevents all air
movement, actual
values are
expected to be
better than 6 per
1” thick versus 3
for conventional
insulation.
Studies suggest
polyurethane
spray insulation
lowers energy
costs 20%-40%
depending on
lifestyle, location,
and structure
design.

11. ArmorBlast™
Blast Mitigation
Impact Resistance
Casualty Reduction

12. Coatings
• STS™ & HighLine™ - toughest coatings available
• ArmorFloor™ - resilient, tough liquid for concrete floors
• ArmorFoam™ - for maximum protection against the elements
• ArmorBlast™ - reduction in damages from explosive attacks
o Polyurea with high tear resistance
o High tensile strength under massive pressure
o Maximum protection by coating concrete or metal
o Proven in blast testing to have less damage than non-coated concrete
block surfaces – University of Missouri, Rolla (August, 2007)
 2lbs explosives @ 3 ft away for blast equivalent to 52 pounds of force per square
inch
 Control wall - large vertical cracks and a “hinge failure” at the corners, structure
judged unsafe
 1/8” ArmorBlast coating on outside – with and without primer - small vertical
tension cracks on back side of wall. No visible damage to the outside face
 1/8” ArmorBlast coating on outside and inside without primer - no noticeable
damage on inside or outside. No movement of the wall due to deflection
 Blast #2 on wall with 1/8” ArmorBlast coating on outside and inside
without primer: 2lbs explosives @ 1.5 ft away for blast equivalent to 210
pounds of force per square inch. No noticeable damage on inside or
outside. No movement of the wall due to deflection
UMR
Research

13. Uncoated Control Wall
Pre-Blast: Outside View @ 3ft

14. Uncoated Control Wall
Post-Blast Results: Outside View
Severe Damage
- judged unsafe

15. Uncoated Control Wall
Post-Blast Results: Inside View
Severe Damage
- judged unsafe

16. One Side ArmorBlast™
1/8” Coating Post-Blast: Outside View
No Damage

17. One Side ArmorBlast™
1/8” Coating Post-Blast: Inside View
Minimal Damage

18. Two Sides ArmorBlast™
1/8” Coating Pre-Blast @ 1½ ft: Outside View

19. Two Sides ArmorBlast™
1/8” Coating Post-Blast @ 1½ ft: Outside View
No Damage

20. ArmorTuff™
1/8” Coated Two Sides Post-Blast @ 1½ ft: Inside View
No Damage

21. ArmorBlast™
Results show it makes a difference for
protecting people and structures.

22. Applications
Whatever the reason, regardless
of the surface, we have a high
performance product to meet
the needs of your customers.
• Variety of surfaces
• Proactive protection
• Difficult problems
• Safe environments
• Attractive designs and colors

23. Applications:
Coat a variety of surfaces.
• Metal – truck beds, farm & construction equipment, military transport,
pipes, beams, fan blades, tanks, bins, processing tables, ladders,
trailers
• Concrete – factory floors, pillars, patios, walkways, parking lots,
loading docks, pools, fountains, foundations, pits, trenches, tunnels,
stadiums
• Asphalt – parking lots, driveways, walkways
• Fiberglass – commercial boat hulls and decking, trailers, specialty
vehicles, lightweight aircraft, tanks
• Wood – flooring, walls, porches, decking
• Sand, gravel, dirt, or clay with the addition of geotextile material

24. Applications:
Be proactive with surface protection.
• Water and other liquids
o Create secondary containment for protection against spills or
ruptures
o Add years of service with weather-proofing
o Cover material susceptible to warping, rusting, corrosion, water
seepage
• Intense sunlight
o Maintain color and design quality for years
• Corrosion
o Make surface resistant to chemicals
• High wear
o Coat new areas during construction to resist scratching, denting,
and operational wear-and-tear

25. Applications:
Solve difficult problems from adverse conditions.
• Water and other liquids, corrosion
o Seal minor leaks
• Intense sunlight
o Re-color faded areas with longer-
lasting materials
o Rejuvenate weather-worn surfaces
• High wear
o Cover worn areas to extend life
• High energy costs
o Add spray foam insulation to
open areas such as attics, crawl
spaces to block outside air flow

26. Applications:
Provide safe environments.
• Solvent-free so not explosive or an environmental hazard; no
VOCs or CFCs

27. Applications:
Provide safe environments.
• Solvent-free; no VOCs or CFCs
• Secondary containment
o Protect against leaks or spills from chemicals, fuels, waste water, crude
oil, and other liquids and corrosive solids
o Prevent deterioration from constant
exposure to direct sunlight and
extreme weather
o Use for systems with:
 Oil and Gas Well Sites and Facilities
 Tank Farm Dikes
 Sumps and Trenches
 Drum Storage Areas
 Petroleum Storage
 Chemical Storage Areas

28. Applications:
Provide safe environments.
• Solvent-free; no VOCs or CFCs
• Secondary containment
• Compliant with health regulations for
food processing
o Apply to surfaces that require thorough
cleaning
o Will not absorb other materials

29. Applications:
Provide safe environments.
• Solvent-free; no VOCs or CFCs
• Secondary containment
• Compliant with health regulations for food
processing
• Slip and skid resistance
o Give concrete and other flooring and steps a
textured surface
o Cover areas that tend to absorb spills so they are
more easily cleaned
o Add resilience to hard underlayments for more
comfortable standing or walking

30. Applications:
Provide safe environments.
• Solvent-free; no VOCs or CFCs
• Secondary containment
• Compliant with health regulations for food processing
• Slip and skid resistance
• Increased security for military, government, other facilities
o Reduce casualties from hostile explosive attacks
o Prevent or reduce structural damage injury from terrorism in
public buildings, sporting events, VIP residences, and other
high profile areas
o Apply to armored transport vehicles, limousines, bunkers, and
combat equipment
o Create a secure environment for high visibility personal in
political, government, military, and private sector positions

31. Applications:
Add color and design inside or
outdoors.
• Color-coding
o Add permanent color to tanks, pipes, and other pieces
of equipment to distinguish one from another
o Mark walkways and roads with long-lasting colors
• Applications for a variety of surface types and
shapes
o Apply to commercial or residential floors, patios,
lobbies, walls, stairs• Endless decorative ideas
o Coat with colors that last for years even under
extreme environmental conditions
o Turn plain concrete into attractive, easy-to-
clean flooring with high gloss or abrasive finish
o Apply textures and color to plain surfaces to
simulate the look of stucco, brick, or tile
o Use multiple colors to create logos, patterns,
borders, etc using masks, tape or stencils

32. Equipment
ArmorThane has developed and sourced the best
quality and performance equipment available.
• Operator friendly
• Ease of application
• Cost-effective set up
• Easy to maintain
• Long-lasting performance
• Expert results

33. Customer Service
Our customers appreciate the services
we provide to help their jobs run more
smoothly.
• Valuable on-site training
• Phone support and operations manuals
• Cutting-edge product development for new
applications
• 24/7 online access to:
• Tech Data Sheets & MSDS
• Technical bulletins and drawings
• Operations Manuals
• Product Catalogs
• Marketing materials and ideas

34. Call or visit our website to learn how our
selection of products work for you.
© 2007 ArmorThane USA, Inc