2. Is a product
which can be easily assembled and offers high
security. This is ideal concept to setup a warehouse
of up to 30 meters proficiently at one go. Further,
owing to features such as less weight, strength, no
trusses, durability and cost-effectiveness, these are
acknowledged in the market.

3. Arch Roofings uses high grade, 350 Mpa yield strength, pre-painted
Galvalume steel as the basic raw material.
Base metal:
 Cold rolled structural quality steel in coil form
 Steel grade D: Min 350 Mpa Yield strength.
 Steel thickness 0.85mm to 1.6 mm (base metal).
 Available in different color like White, Blue, Orange, Red, Maroon etc..

5. Types of Gutters:
 Center Gutter - Suitable if more than one building.
 Side Gutter - Suitable for all kinds of buildings.
Gutter Properties:
 Gutter concrete strength should be 20 N/MM Sq
 For Gutter dimensions refer the drawings.

7.  It should be perfect line and level through out the length.
 Minimum curing time of 15days.
 600mm projection of Beam at both the Gable Ends.
 Beam should be min 300mm wide and 450 mm in height.
 Center gutter Minimum width should be 750 mm.

8.  Side/End gutter Minimum width should be 450mm
 Gutter must be kept open at both ends.
 Brick wall should not be constructed on the edge of gutter
 Slope should be 43.6 degree & maintained through out the length(holds
good for arch rise span/5).
 Slope angle/gutter should be made of HARD RCC without any type of
plastering or waterproofing.
 Slopping length should not be less than 207mm.
 There should be any projection of extra reinforcement/ RCC column on the
slope beam.

10. It is suitable for:
Warehouses, Manufacturing, Textiles, Food, Chemicals, Pharma, Plastics,
Packaging, Electrical, Electronics, Engineering industries, Logistics,
Automobile workshops, Conventional Centers, Auditoriums, Exhibition
Halls etc…

11.  Self supported structure without trusses, purlins or any ancillary support.
 Zero maintenance and 100% leak proof.
 Free from holes, nuts, bolts & overlaps.
 Resistant to damage and corrosion.
 On site fabrication and installation.
 Sturdy and durable ensuring a long lasting life and aesthetically appealing.
 The best grade of all steels as raw material

12.  We hold expertise in
providing Trussless Roof
for Halls and Auditorium
that is in accordance with
the latest trends. It is light
in weight and well-known
of its durability, perfect
finish & high temperature
resistance. Trussless Roof
offered by us is in great
demand amongst our
clients due to its following
quality attributes:
 Cost saving
 Maintenance free
 Faster installation
 100% leak proof
 More space utilization

13.  We offer Trussless Roof,
which is specially designed
for industrial and
commercial roofing needs.
These are made using
quality material and
reckoned for their high
strength, corrosion
resistance, low maintenance
cost & good aesthetics. Our
range of Trussless Roof can
be availed in varied
dimensions & specifications
and has the following
advantages.
 Maintenance free
 More space utilization
 No spoilage due to bird
nuisance

14.  Why Us
 Timely delivery
 Exclusive Range Of Products
 Customized Solutions
 Highly Competitive Prices
 Capacious Ware Housing & Quality Packing
 A team Rich In industry Experience

15. Thank you

20. ArchRoof

25. TFP PANEL
PROFILE DESIGN
HOOK
24 HEM
17.25
3.75
3.75
8
6.63
CRIMPS
8

26. Roofing Accessories
 Light Hangers
 Sky Lights
 Turbo Ventilators
 Anchor Fastener
 If span 22m then we use 2nos each side.
 If span is more than 22m then we use 3nos each side.

27. Self Supported Roofing work flowchart

30. Roofing Designs
 Elevated Base
 Multiple Bays
 Differential Heights Structures
 Differential Base Structures
 Half Arch
 Ground to Ground
 L section Roofs

31. Major constraints/Requirements
We should obtain the area of the site:
 Ideal size area in and around Bangalore(100km) should be minimum of
500 square meters.
 Apart from Bangalore in and around area, it should be minimum of 800
square meters.
Note: If the max size of the area is less than the size of the ideal size then we
should contact the person whom we are reporting.