Concrete</li></li></ul><li>A division of the Jones-Blair Corporation<br />SUSTAINABLE “GREEN”STRENGTH <br />IN TODAY’S ROOFING<br />POLYURETHANE FOAM & DIRECT BOND ROOF SYSTEMS<br />
Some of our clients: <br />Caesar’s PalaceLOCAL:<br />John Hopkins Hospital- Avila University<br />Rutgers University- Kansas University<br />United States Government-Bonner Springs School District<br />O’Hare International Airport-Miller Distribution Company<br />EDS Travelers - York Label Company<br />Texas A&M University (7 million sq.ft. foam) - Casey’s General Stores<br />Murray Field - American Airlines Maint Bldg<br />University of Kentucky - Clark Enterprises, KC Fairfax area<br />University of West Virginia - Have test patches on Quick Trip<br />New Orleans Superdome warehouse facility in Belton, MO<br />Getty Museum <br />Tandy Corporation <br />Marriott Hotels <br />Bellagio <br />U.S. Department of Navy<br />
Our message is to educate you about......<br />Alternate roofing systems that emphasize: <br />Fiscal Responsibility <br />Environmental Stewardship<br /> with: <br />Roofing products that have been tested and work<br />Licensed Performance Based NEOGARD® contractors that you can trust<br />10, 15 & 20 year warranties<br />
<ul><li>Spray Polyurethane Foam (SPF) roofing consists of an application of specifically designed foam covered with an elastomeric coating to protect the foam from ultraviolet rays.
Specialized equipment mixes two liquid components at the spray gun that applies the SPF to a prepared substrate. The mixed liquid expands many times its original volume in a matter of seconds, forming a rigid foam plastic that chemically bonds to the surface to which it is sprayed.
SPF has a closed cell structure that makes it water resistant. It must, however, be protected by elastomeric coatings to prevent ultra-violet-induced surface degradation.
Since SPF adds little weight (60# per 100 sq.ft.) to existing roof coverings and can build slope to fill in low areas, these systems are used frequently as a retrofit roofing system.</li></li></ul><li>SPF Chemistry Fundamentals<br /> A-Side: MDI - Isocyanate<br />B-Side: Proprietary Polyol Resin Blend polyols , catalysts, fire retardants, blowing agents<br />A+B = polyurethane foam<br />
Base Coat<br />Single component moisture-cured, aromatic, fire retardant, polyurethane coating.<br /><ul><li> 2gal/100 sq.ft.; 26 dry mils; 10-yr warranty
Edison Elementary Roof Coating Project<br />Mangum, OK<br />Project completed by: Washington Companies Inc.<br /> Chuck Carpenter - Owner<br />Chuck,<br />“Thanks for the pictures. Any other pictures that you have would be great as I will use them to put in the newspaper and also present them to our school board members. I am very impressed with the job you guys did and the professionalism of the workers. You have my full recommendation for any job you are seeking”.<br />Micky Lively<br />Superintendent, Mangum Schools<br />
ROOF SYSTEM COST COMPARISON<br />Direct Bond vs. Modified Bitumen<br />10,000 sq.ft. roof used for example:<br />4-PLY MODIFIED BITUMEN<br />DIRECT BOND ROOF SYSTEM<br />*** No tear-off in 95% of retrofit applications ***<br />Performance Requirements for Cured Film:<br /> Base Coat (39 dry mils) Topcoat (21 dry mils)<br /><ul><li> Tensile Strength: 1,000 psi 1,500 psi
Elongation: 375% 360%</li></ul> Total Film Thickness Averages 60 Dry Mils<br />*** Tear-Off required at initial <br />re-roofing and each warranty<br />extension period ***<br />
ROOF SYSTEM COST COMPARISON<br />Direct Bond vs. EPDM (Rubber)<br />10,000 sq.ft. roof used for example:<br />EPDM (Rubber)<br />DIRECT BOND ROOF SYSTEM<br />*** No tear-off in 95% of retrofit applications ***<br />Performance Requirements for Cured Film:<br /> Base Coat (26 dry mils) Topcoat (12 dry mils)<br /><ul><li> Tensile Strength: 1,000 psi 1,500 psi
Elongation: 375% 360%</li></ul> Total Film Thickness Averages 38 Dry Mils<br />*** Tear-Off required at initial <br />re-roofing and each warranty<br />extension period ***<br />
TAX ADVANTAGESFOR DIRECT BOND ROOF SYSTEMS<br />According to Sec. 1.162-4 Repairs of IRS Tax Code:<br />Roof maintenance systems are fully tax deductable as an operating expense. One of the key advantages of a restoration system over a new roof system is in how it is classified by the IRS. Restoration is classified as a maintenance, and in most cases it can be expensed in the accounting period it is incurred. On the other hand a new roof system is a capital asset that must be amortized over a 39 year life.<br />
A division of the Jones-Blair Corporation<br />Why are Cool Roofs Cool?....................<br /><ul><li>Simple Science – dark materials absorb more heat than light materials
Most “Traditional” dark-colored roofs absorb 70% or more of the </li></ul> solar energy striking them – resulting in peak roof temperatures of 150* <br /> to 190* F.<br /><ul><li> By comparison – a white, reflective cool roof will be 50* to 60*F cooler </li></ul> on hot days.<br /><ul><li> The resulting reduction of heat transfer into the air-conditioned spaces can</li></ul> decrease cooling costs by 20% or more. <br />
ENERGY STAR® <br />Reflectivity<br />Solar Reflectance of a Roof is defined as the percentage of solar energy Reflected by the roof’s surface.<br /><ul><li>ENERGY STAR® Reflectance Requirements:
Initial: 77% Aged: 63%</li></ul>LEED<br /><ul><li>Emittance of a Roof is the Percent of Solar Energy Radiated from the Material (how much of the absorbed heat energy is released from the material)
LEED Combines ENERGY STAR® Reflectance Requirements with at least 90% Emittance</li></ul>___________________________________________<br /><ul><li>NEOGARD® White Roof Coatings EXCEED LEED Emissivity Requirements.
Polyurethane (70613) – 95%</li></li></ul><li>Environmental “Green” Advantages of Sustainable Roofing Systems <br />Dade County approved; FM Global; UL rated; Cool Roof rated<br />Products are LEED qualified<br />Low odor, one-part urethane membrane (toughest, most durable fluid-applied membrane on the market)<br />Helps keep your building cooler (lower energy expense)<br />Sustainable and Renewable roof system<br />Bio-Preferred Roofing Systems (36% Bio Content)<br /> USDA website: www.biopreferred.gov<br />Is Foam “Green” & Why?<br />Spray foam insulation has significant impact on reducing the need for fossil fuels through energy savings<br />SPF is environmentally friendly by containing no ozone depleting blowing agents, no CFCs, HCFC, asbestos, formaldehyde and no glass fibers<br />High performance, low maintenance and easily restored to initial performance levels<br />Can be applied directly to existing substrate in 95% of retrofit situations, diverting waste from landfill.<br />
And one of the biggest benefits of a Sustainable Roof System….<br />The vast majority of the time, NO TEAR-OFF and LANDFILL COSTS<br />Nine to 10 million tons of asphalt roofing waste are sent to American landfill sites every year. Every 10,000 square-foot roof tear-off creates an estimated 270 cubic feet of waste and application.<br />The price tag for this disposal amounts to over $400 million.<br />Oak Ridge National Laboratory (ORNL)<br />“Extending the life of an existing roof from 15 to 30 years would reduce the volume of<br />re-roofing debris by a total of 160 million cubic feet (40% of current roofing waste) and 1.6% of the total solid waste landfilled each year.”<br />Oak Ridge National Laboratory (ORNL)<br />
Micro Organisms</li></li></ul><li>Moisture <br /><ul><li>Moisture Drive (MVT)</li></ul>Calcium Chloride Test Method- ASTM F1869. Standard test method for measuring moisture vapor emission rate of a concrete substrate using anhydrous calcium chloride in a given time frame.<br />
Surface Preparation<br />Shot Blast<br />Scarification<br />Sand-Blast<br />Acid Etching(Hydrochloric Acid)<br />Pour Acid into water<br />Never water into acid<br />Dilution 2:1 water-acid<br />Grinding<br />
- CRU 70815/70816 Optional Coat</li></li></ul><li>Tuff Family (Maintenance Options)<br />DustTuff<br />7779/7781 Water base Epoxy<br /> Light traffic warehouses<br /> Storage rooms<br /> Where no build-up membrane is required<br /> Pre-primer for out-gassing conditions<br />due to over porous concrete<br />DFT: 3 mils<br />Recoat: 1.5 mils<br /><ul><li>- One product System
- 70714/70715-09 Primer/Top</li></li></ul><li>Tuff Family(Maintenance Options)<br />FloorTuff<br />High traffic conditions<br />Corrosion resistant environments<br />Mechanical rooms<br />Maintaining Industrial kitchens<br />Maintaining floors<br />Clean rooms<br />Corrosion resistant environments<br />Smooth and Texture<br />Available in 8 colors and clear<br />DFT: 16 mils<br />Recoat: 8 mils<br /><ul><li>- One product System
- 70714/70715 Primer/Top</li></li></ul><li>SkyGard(Aviation Program)<br />First and Complete Program for Aviation Industry<br />Options to “BEST FIT” different requirements<br />Authenticated SkyDrol Resistant<br />Sustainable with Extended Maintenance schedules<br />Maximum durability at the right thickness / investment<br />VOC Compliant (CRU 70815/70816)<br />
SkyGard(Aviation Program)<br />Every Segment is a different group with different requirements<br />Aviation Market<br />Government<br />Navy<br />Sets the standards<br />Air Force<br />Coast Guard<br />Agencies (FBI, CIA, NS)<br />Private<br />Commercial Aviation<br />General<br />Manufacturing<br />MRO (Maintenance, Repair & Overhaul)<br />FBO (Fixed Base Operator)<br />
CRU 70805/7952 or 70815/70816 Top Coat</li></li></ul><li>Over Occupied Space Options<br /><ul><li>Waterproof Rider
Mortar Systems</li></li></ul><li>Maintenance Options<br /><ul><li>Maintenance Guide</li></ul>Extending the life of the flooring system<br /> Educate the customer<br /> The Cleaner the floor is kept<br /> Periodical Inspections<br />
Final Statement<br /><ul><li>NEOGARD®is a Committed Solution Source for the Flooring market
Curt Carpenter Independent Representative</li></li></ul><li>CURTCARPENTER<br />C&G COATINGS <br /> Your NEOGARD® Representative<br />Thank you for your time. Please feel free to contact me for an estimate or more information on the NEOGARD®product and application that’s right for you.<br />8228 Marshall Dr.<br />Lenexa, KS 66214<br />913-438-2412 – office<br />913-634-2588 – cell<br />913-492-4362 – fax<br />email@example.com<br />www.cgcoatings.com<br />www.neogard.com<br />