2. HIGH PRESSURE COATINGS
WITH BROAD SPECTRUM & SPECIFIC BENEFITS
ArmorLiner 1:1 Hybrid Polyurea
HighLine 410 1:1 Aliphatic Pure Polyurea
HighLine 510 1:1 Pure Polyurea
HighLine 510 H 1:1 Pure Polyurea
HighLine 610 1:1 Pure Polyurea
AquaSafe 1:1 Pure Polyurea –NSF Certified
UltraBlast 1:1 Pure Polyurea
UltraTech 1:1 Pure Polyurea
FlexGard 75 1:1 Hybrid Polyurea
SureGrip 1:1 Pure Polyurea
ArmorSeal 100 AL 1:1 Pure Polyurea
HiChem 1:1 Pure Polyurea
EnviroThane 1:1 Hybrid Polyurea
HardCoat 1:1 Polyurethane
ArmorFoam 1:1 Polyurethane Expanding Foam
3. ARMORLINER (1:1, HYBRID POLYUREA)
A medium hardness material, with a quick 5
seconds set time. This is our most useful all
around coating. It has very good physical
properties and is used for all sorts of general
coatings.
4. HIGHLINE 410 (1:1, ALIPHATIC PURE POLYUREA)
This material is a color fast Pure Polyurea, this
material will have no color change or alteration
while still providing the physical strength and
durability of polyurea
5. HIGHLINE 510 (1:1, PURE POLYUREA)
This is an excellent corrosion resistant material with
superior skid resistance even to the ArmorLiner.
The slightly slower set time allows for a smoother
texture application. This material is moisture
resistant during application making it a great choice
for moisture laden environments.
6. HIGHLINE 510H (1:1, PURE POLYUREA)
This material is a harder
version of our moisture
resistant 510. It carriers
a greater abrasion
resistance and greater
overall chemical
resistances
7. HIGHLINE 610 (1:1, PURE POLYUREA)
The HighLine 610 is our greatest temperature range
of application material. This material can be
sprayed at very low temperatures without
experiencing any detriment to the finished coating
and has properties very similar to the HighLine 510
8. AQUASAFE (1:1, PURE POLYUREA)
This material is the Potable Water Certified version of
the HighLine 510 It passes the US ANSI NSF-61.
This material has a very high tensile and tear
strength, coupled with good elongation. This is a
very durable and resistant coating.
9. ULTRABLAST (1:1, PURE POLYUREA)
This is the ultimate in blast protection. Its
exceedingly high tensile and tear strengths allow
this material to survive extreme pressures. This
material also has great adhesion to various
construction substrates, which allow it to hold
together a structure in very adverse conditions
10. ULTRATECH (1:1, PURE POLYUREA)
This is our highest abrasion resistant material. It is
very good for sites where extreme wear resistance
is necessary.
11. FLEXGARD-75 (1:1, HYBRID POLYUREA)
This is a relatively soft high pressure material with
good slip resistance, it has been used to re-cover
conveyor slip rollers at the end of their lifespan.
12. SUREGRIP (1:1, PURE POLYUREA)
This material is a softer
material with the greatest
elongation properties.
Combined with its tensile
and tear strength, this
material adapts very well to
multiple substrates and
substrates with high
movement. The SureGrip
also has the highest
coefficient of friction, maxing
out our slip resistance
testing!
13. ARMORSEAL 100 AL (1:1, PURE POLYUREA)
This softer, more flexible
material is designed to
hold an aluminized leaf
pigment. The result is a
reflective surface not
unlike the backside of tin
foil. This material can
retain its integrity even
when the substrate
needs to move and flex
underneath, and the
reflective surface can
mitigate heat absorption.
14. HICHEM (1:1, PURE POLYUREA)
This material offers the most comprehensive chemical
and corrosion resistances. Physically it has good
skid resistance, and very good impact and abrasion
resistances.
15. ENVIROTHANE (1:1, HYBRID POLYUREA)
This material is our standard secondary containment
material; it has the lowest lineal shrinkage of our
standard lines and works very well when used with
geotextiles or felts for large area containments.
16. HARDCOAT (1:1, POLYURETHANE)
One of the hardest
elastomeric coating we offer.
This extremely rigid coating
can do everything from
coating foam to add rigidity,
to spraying on the inside of
a mold and holding its shape
when released! This
material is also available is a
fire retardant version that is
recommended for use with
signs and displays in public
areas.
17. ARMORFOAM (1:1, POLYURETHANE)
This spray foam insulation is available in closed or
open cell, and in densities varying from 0.5 lbs. to
7+lbs. 2 lb. foam is the standard.
18. Call or visit our website to learn more.
Protecting Your World
