The document contains the resume of Arivazhagan T, a mechanical engineer based in Chennai, India. It summarizes his work experience as a mechanical engineer and HVAC trainee engineer in Qatar and objectives to work for a progressive organization. It also includes his education qualifications and personal details.
Dear Sir/madam,
I would like to introduce myself as a Mechanical engineer with 7 months of experience in designing & site execution of Mechanical works.
Currently I am on a visit visa seeking an opportunity to secure a challenging and competitive position as a Mechanical Engineer in a reputed organization that enables me to share and enrich my knowledge in all possible dimensions.
Please find my attached CV for your consideration, and if there is any vacancy in your firm kindly let me know. For further details about my profile you can contact me on my below given mobile no. or email.
Best Regards,
HAMID ABDUL SAMI
MOBILE: 0559546542
E-MAIL: hamidasami1606@gmail.com
Dear Sir/madam,
I would like to introduce myself as a Mechanical engineer with 7 months of experience in designing & site execution of Mechanical works.
Currently I am on a visit visa seeking an opportunity to secure a challenging and competitive position as a Mechanical Engineer in a reputed organization that enables me to share and enrich my knowledge in all possible dimensions.
Please find my attached CV for your consideration, and if there is any vacancy in your firm kindly let me know. For further details about my profile you can contact me on my below given mobile no. or email.
Best Regards,
HAMID ABDUL SAMI
MOBILE: 0559546542
E-MAIL: hamidasami1606@gmail.com
Atmospheric Exposure to Cr III Powder Causes Genotoxicity in Rattus Norvegicus.inventionjournals
Several chemical elements are responsible for altering the genetic integrity of living beings. The metal Cr stands out in this regard. It exists in two oxidation states, Cr VI and Cr III, and has been investigated as an important environmental and occupational contaminant. Although the former is considered carcinogenic, the latter is classified as safe, even for human use in food supplementation. However, most studies with Cr( III) have been carried out by different routes to how it is occupationally found – in the atmosphere. This study evaluated the genotoxicity of Cr(III) inhaled during 8 hours of exposure to the maximum concentration permitted by ATSDR. Fifteen male Rattus norvegicus were used in this study. There were 3 groups (n=5 per group); these were - group exposed to Cr (III) powder (S), the negative control group (NC) and the positive control group (PC). The animals were exposed to Cr aerosol particles at a flow rate of 9L/min and atmospheric concentration of 500μg/m3 for only 8 hours in this study. An increase in genotoxicity and mutagenicity in the group exposed to the metal powder was observed. These findings suggest that further studies should be carried out in order to establish safe levels of exposure to Cr III in work environments
Pourquoi et comment aller vers un management participatif oct16HUMAN BEING
L’évolution des organisations collectives semble aller de paire avec l’évolution du niveau de conscience humaine et de notre contexte de vie.
Que nous indique donc précisément la vague de « co », comme collaboratif ou communauté de partage (coworking, covoiturage, co-construction, management collaboratif , intelligence collective….)qui nous suggère de nous libérer de l’obsession du bien-être matériel personnel et de la vision pyramidale des organisations pour nous ouvrir à une nouvelle conception du monde et une nouvelle éthique des relations ?
Therapeutic Evaluation of Arsenicum Album (C-200 and C-300) Against Trypanoso...inventionjournals
: In continuation from previous preliminary report on anti-trypanosomal activity of Arsenicum album in our fervent search for efficient, effective and affordable therapeutic agents from medicinal plants and other sources against the menacing disease, trypanosomosis, Arsenicum album pellets (C-200 and C-300) (homeopathic drug) at concentrations ((250-1000 µg mL-1) were screened against Trypanosoma evansi. In this method, two sets of Vero cell line were grown in Dulbecco’s Modified Eagle Medium (DMEM) (Sigma) in 96- well flat bottom micro culture plates (Nunc, Denmark). Each well received 100 µl of DMEM containing 5x105 cells/mL. The plates were incubated at 37๐C under 5% CO2 for 48 h to complete development of monolayer. The suspension (100 mL of medium with trypanosomes) was added at rate of 1:1 to test A. album pellets and the ELISA plates were incubated under the same conditions mentioned above. In vitro cytotoxicity test was performed on the same medium at concentrations (1.56-100 µg/mL) but without supplement of foetal calf serum in triplicate and incubated under the same conditions described previously. Results obtained indicated that at 250 µg/mL of A. album (C-200 and C-300), there was significant reductions in trypanosomes count in corresponding ELISA plate wells (40.±0.0 to 1.667±0.33) at 9th h of incubation and but no trypanosome was detected (40.±0.0 to 0.0±0.0 at 9th h in the second concentration, respectively. However, at 500 µg/ml of A. album (C-200), trypanosomes were completely killed at 7th h of incubation that was statically the same as diminazine aceturate, the reference drug at 50 µg/mL. For in vitro cytotoxic test, A. album at both concentrations was non toxic to the Vero cells, while diminazine aceturate was cytotoxic to Vero cells except at concentrations (6. 2.5-1.56 µg/mL). Trypanocidal activity was concentration-time depended. A. album (C-200 and C-300) pellets did possess significant trypanocidal activity, which could be further investigated to understand their maximal potentials.
Sr. Level Project Consultant with expertise in both EPC firms and as an Owner Representative Managed the E&I activities to meet the required project schedule from detailed design phase through project execution, completion and hand-over to Field Operations Group.
I am submitting to express my keen interest in the position Sr. Electrical & Instrument Engineer
I am currently worked as Sr. Instrument Field Engineer at Egypt Khalda Petroleum Company (Apache) with 10+ years of overall experience at Construction, commissioning, start-up, planning and Engineering and I Expected Monthly Salary As project budget however my last total net salary 6300$
I worked as QA/QC E&I Engineer / Inspector at the world's largest gas to liquids (GTL) Pearl plant in Qatar, The plant a joint development by Qatar Petroleum and Shell, GTL feed about 15% of worldwide gas resources.
I worked as Sr. QA/QC E&I Engineer / Inspector client (SEPOC, SAFER Exploration & Production Operations Company) representative at the largest project at Yemen Central Processing Unit (CPU) LNG plant at Marib area with total and YLNG joint.
I worked as Sr. Electrical and Instrument Engineer /Supervisor at the largest project at Egypt, with Samsung Engineering.
Project Title: Formulation Project (Agro chemical)
Location: Ankleshwar, Gujarat.
Company: UPL-3
• Responsible in project all mechanical work including Strucher, piping & support fabrication and erection.
• Review of all Equipment specification and erection.
• Coordinating with Engineering and Construction and liaise with the detail engineering requirements.
• Existing Equipment, pipeline & structure dismantling and new pipeline equipment erection as per requirement.
• Ensure the Productivity and Quality is maintained by subordinates. Coordinate with other Disciplines in site.
• Preparing Daily & Weekly Project Monitoring Report to the Management.
• Certifying sub-contractors bills and coordinating for preparing the client bills.
• Ensure that hydro test reinstatement is to be done as per procedure.
• Ensure that all punch list items are resolved; client handover is satisfactorily concluded and that there is no prolongation of project.
• Preparation of resources schedule for proper utilization of equipment’s & Preparing Lifting Plan for Heavy Package erections / Installations.
• Manpower handling and stage inspection of mechanical works at site.
• Responsible for the implementation of safety standards at the project site by ensuring that all relevant norms are employed effectively.
• Ensure commissioning work with Production lots.
1. Location-Chennai, India.
Contact- +919787162930
Email-azhagan.mechanical@gmail.com
Skype-Arivazhagan02
ARIVAZHAGAN T
OBJECTIVE To work for a progressive organization in a highly motivating and challenging environment that
provides the best opportunities to grow and utilize my potential to the fullest to achieve the
organization's goal while achieving my personal goals.
EXPERIENCE
TGIEM, Qatar
Position Held - Mechanical Engineer (HVAC).
Organization - Trans Gulf International Electro MechanicalW.L.L. Doha, Qatar.
(http://www.transgulfem.com).
Time Line –10-Mar- 2015 - 13-Oct-2016
Project Description as follows
Project : Msheireb Down Town Doha(MDD) Phase 2,Doha-Qatar.
Client: Msheireb Propertiesss
Main Contractor: Arabtec Construction Company
Consultant: Gensler / CEG
MEP Contractor: Trans Gulf International Electro MechanicalW.L.L. Doha, Qatar.
It’s a Leed Project having Golden certification.
Project Value of 480 Million QAR.
Total Cooling Load capacity of 7000 TONS.
My Roles and Responsibilities as a Mechanical Engineer in TGIEM,
To go through the project specifications, based on project specification preparing schedule for
Equipment Selection, Ducting, Chilled Water Piping.
We are following the standards ASHARE,SMACNA.
Verify the ESP and PUMP Head calculations as per client requirement.
To select the Equipments based on Schedule.
To Prepare Submittal, Reviewing of Submittal based on Specification and Standards and submitting
it for Approval.
To prepare Method Statements Related to HVAC,Reviewing it and submitting it for Approval.
Guiding Draughtsman to Prepare Shop Drawing, Reviewing the Prepared Drawings and Submitting
the Drawings for Approval.
To check approved Shop Drawings and Co-ordination Drawings before Execution.
To prepare schedule and to execute the work as per plan.
To prepare site requisition and to send the requisition to purchase department.
Arranging the materials for execution based on Area clearance and shop drawings.
To take up quantities of Pipes, Pipe fittings, valves, Dampers,Access Door and Grills.
Co-ordination with the Site Supervision consultant at the time of Inspection.
First task, Mock up Installation and Execute the work successfully completed with Client Approval.
2. Email-azhagan.mechanical@gmail.com
Contact- +91 9787162930
ARIVAZHAGAN T
Page | 2 ARIVAZHAGAN T
azhagan.mechanical@gmail.com
To execute Duct and Pipe Works in High Level as well as in Risers and to take part in FCU’s and
AHU’s Installation.
Tracking the progress as well as managing the progress to meet deadlines. Witnessing the final test
results are within the limitation alongside with consultants and clients.
Chilled water pipe installation, testing and flushing process.
Co-ordination with Execution of HVAC,Plumbing, Fire Fighting & Electrical Installation
activities.
Playing a major role as a member in LEED Execution Team for the company in this project.
EXPERIENCE
TGIEM, Qatar
Position Held– HVAC Trainee Engineer.
Organization- Crompton International Trading and Contacting Co.W.L.L,Qatar.
(http://www.cromptonqatar.com).
Time Line –12-Aug 2014 – 08-Feb 2015.
Project : Jk1- Cultural Forum
Client: Msheireb Properties
Main Contractor: HBK Construction Company
Consultant: Gensler / CEG
MEP Contractor: Trans Gulf International Electro MechanicalW.L.L.
My Roles and Responsibilities as a HVAC Trainee Engineer
Reviewed consultant prepared HVAC design for constructability, coordinated with other MEP &
civil/architectural drawings for ease of implementation in terms of cost & time, identifying critical
risks/issues in drawings/designs after understanding the requirements of the project.
Helped design team for data sheet and engineering design approval of various packages.
Oversaw the overall HVAC activities, monitored & guided the sub-ordinates in technical/operation
areas & ensured through on-site supervision that the undertaken jobs were done as per the approved
Technical specification, design intent, drawings, requisite quality &HSE standards
And co-ordination with other departments (Design, commercial, planning, civil, architectural,
quality &HSE) apart from providing timely information to the Project Manager/quantity surveyor
on deviations/ extra jobs in order to take necessary action to do accurate billing.
Monitored the job progress & managed various vendors by providing them with adequate work
fronts and regularly informed project manager/ client with issues related to vendors.
Regularly attended project progress review meetings & job closing meetings with the
client/PMC/consultant on behalf of my organization to understand client/PMC/consultant
requirements apart from addressing their queries.
3. Email-azhagan.mechanical@gmail.com
Contact- +91 9787162930
ARIVAZHAGAN T
Page | 3 ARIVAZHAGAN T
azhagan.mechanical@gmail.com
COMPUTER
PROFICIENCY
Operating System- Windows XP, Windows7, Windows8, Windows10.
Office Apps- MS Word, Excel, Power point, Outlook & Project.
Design Apps-Auto CAD, MC Quay duct & pipe seizer, Pro-E, Solid Works
EDUCATIONAL
QUALIFICATION
Bachelor of Engineering
Mechanical Engineering from Ranganathan Engg. College, Coimbatore. Affiliated to Anna
University of Technology, Coimbatore, Passed out with First Class in 2013.
Higher Secondary: St. Peter’s Higher Secondary school, Trichy (Dt). Passed out in 2009.
S.S.L.C: St. Peter’s Higher Secondary School, Trichy (Dt). Passed out in 2007.
PERSONAL
DETAILS
PERSONAL DETAILS
Name Arivazhagan T
Fathers Name Thenmozhi R
Sex Male
Date of Birth 15-Feb-1992
State & Nationality Tamil Nadu, Indian
Marital Status Single
Passport IssuedDate 28-Oct-2013
Passport Expire Date 27-Oct-2023
Hobbies Listen Music, Playing Cricket, Playing Volley Ball
Languages Tamil, English, Hindi, Malayalam
Permanent Address North Street,Kulamanickam (Po),Ariyalur (Dt), Pin- 621 722
DECLARATION I Appreciate Your Time, For Reviewing My Application and It Will Be a Pleasure for Me to Attend an
Interview with You atYour Convenient Time.
ARIVAZHAGAN T, Chennai