This document is a CV for Shadrach Joseph Siguan, an architect with over 8 years of experience in consulting and contracting roles in the UAE and Qatar. It outlines his education, qualifications, including becoming a licensed architect in 2014. It also provides details of his past work experience with companies like Arabtec Construction and J&P/Conspel, and the roles and responsibilities in each position. His technical skills include AutoCAD, Revit, Primavera P6 and rendering software.
السلام علیکم ورحمۃ اللہ وبرکاتہ
With reference to web search, attached please find the CV for the post of Auto cad Draftsman .I have +9 years (4 years in U.A.E & 5 years in Pakistan) of experience in the field of architect designing. Currently I am working in UAE based company. I can prepare Architectural, Interior, Structural, Plumbing and Electrical drawings consisting of Villa, High-rise Apartment, Multistore Building, Offices, Mosque, Hostels, and Banquet Halls & Swimming Pool etc.
I am looking to have an opportunity at international level to groom and present my all skills.
It is requested to have a look on my CV & Work and give me chance to show my abilities. Waiting for your kind reply.
I have valid UAE Driving License.
_______________________
Regards, ……
Yasir Khan ياسر خان
Architectural Draftsman & 3d Artist
+971-52-9489065 , +971-56-5799417
+92-322-4714071 , +92-333-8663991
Web: khan-studio.wix.com/khanstudio
السلام علیکم ورحمۃ اللہ وبرکاتہ
With reference to web search, attached please find the CV for the post of Auto cad Draftsman .I have +9 years (4 years in U.A.E & 5 years in Pakistan) of experience in the field of architect designing. Currently I am working in UAE based company. I can prepare Architectural, Interior, Structural, Plumbing and Electrical drawings consisting of Villa, High-rise Apartment, Multistore Building, Offices, Mosque, Hostels, and Banquet Halls & Swimming Pool etc.
I am looking to have an opportunity at international level to groom and present my all skills.
It is requested to have a look on my CV & Work and give me chance to show my abilities. Waiting for your kind reply.
I have valid UAE Driving License.
_______________________
Regards, ……
Yasir Khan ياسر خان
Architectural Draftsman & 3d Artist
+971-52-9489065 , +971-56-5799417
+92-322-4714071 , +92-333-8663991
Web: khan-studio.wix.com/khanstudio
Student information management system project report ii.pdfKamal Acharya
Our project explains about the student management. This project mainly explains the various actions related to student details. This project shows some ease in adding, editing and deleting the student details. It also provides a less time consuming process for viewing, adding, editing and deleting the marks of the students.
Saudi Arabia stands as a titan in the global energy landscape, renowned for its abundant oil and gas resources. It's the largest exporter of petroleum and holds some of the world's most significant reserves. Let's delve into the top 10 oil and gas projects shaping Saudi Arabia's energy future in 2024.
Using recycled concrete aggregates (RCA) for pavements is crucial to achieving sustainability. Implementing RCA for new pavement can minimize carbon footprint, conserve natural resources, reduce harmful emissions, and lower life cycle costs. Compared to natural aggregate (NA), RCA pavement has fewer comprehensive studies and sustainability assessments.
About
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Technical Specifications
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
Key Features
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface
• Compatible with MAFI CCR system
• Copatiable with IDM8000 CCR
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
Application
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
NUMERICAL SIMULATIONS OF HEAT AND MASS TRANSFER IN CONDENSING HEAT EXCHANGERS...ssuser7dcef0
Power plants release a large amount of water vapor into the
atmosphere through the stack. The flue gas can be a potential
source for obtaining much needed cooling water for a power
plant. If a power plant could recover and reuse a portion of this
moisture, it could reduce its total cooling water intake
requirement. One of the most practical way to recover water
from flue gas is to use a condensing heat exchanger. The power
plant could also recover latent heat due to condensation as well
as sensible heat due to lowering the flue gas exit temperature.
Additionally, harmful acids released from the stack can be
reduced in a condensing heat exchanger by acid condensation. reduced in a condensing heat exchanger by acid condensation.
Condensation of vapors in flue gas is a complicated
phenomenon since heat and mass transfer of water vapor and
various acids simultaneously occur in the presence of noncondensable
gases such as nitrogen and oxygen. Design of a
condenser depends on the knowledge and understanding of the
heat and mass transfer processes. A computer program for
numerical simulations of water (H2O) and sulfuric acid (H2SO4)
condensation in a flue gas condensing heat exchanger was
developed using MATLAB. Governing equations based on
mass and energy balances for the system were derived to
predict variables such as flue gas exit temperature, cooling
water outlet temperature, mole fraction and condensation rates
of water and sulfuric acid vapors. The equations were solved
using an iterative solution technique with calculations of heat
and mass transfer coefficients and physical properties.
We have compiled the most important slides from each speaker's presentation. This year’s compilation, available for free, captures the key insights and contributions shared during the DfMAy 2024 conference.
block diagram and signal flow graph representation
Archt joseph cv architect2016
1. CV – Shadrach Joseph Siguan
Contact - Mobile: +971 564730834 / Email: shadrachjosephsiguan@yahoo.com
1
AR. SHADRACH JOSEPH SIGUAN, UAP
Registered and Licensed Architect
P.O BOX: 54938 Saadiyat Island Abu Dhabi ,UAE
UAE Mobile No: +971 564730834
Philippine Mobile No. +63 9996798282
Email Address: shadrachjosephsiguan@yahoo.com
SUMMARY OF QUALIFICATION:
Over Eight (8) years’ experience in both Consulting and Contracting like preparing Schematic
Design Plans and 3D presentations (Interior & Exterior), Technical Submittals including
Preparation & Approval of Drawings, Sketch Proposal, Progress Reports, Details, Documentation
and Presentation. Involved in Coordination and Technical Assistance,Participate Site Visits and
Meetings and perform Site Inspection, Proficient in MS Office application (Word, Excel, Power
Point) AutoCad, Photoshop, REVIT, Sketch up 3d and V-ray rendering. Highly dependable, multi-
tasking, hardworking and good communication.
______________________________________________________________________________
EDUCATION & QUALIFICATION:
2001-2007 Bachelor of Science in Architecture
Eulogio “Amang” Rodriguez Institute of Science & Technology, Philippines
OCT. 2014 Passed the Licensure Examination for ARCHITECTS
Government Examination for Architecture - Philippines
www.prc.gov.ph
CARRER OBJECTIVES:
To enhance my knowledge through seeking any opportunities which will fit my qualifications and to
contribute to the company’s success and growth and be an asset of the company through my hard
work, diverse skills and dedication to work.
______________________________________________________________________________
DETAILED SUMMARY OF WORK EXPERIENCE:
Company : ARABTEC CONSTRUCTION L.L.C
DUBAI, UNITED ARAB EMIRATES P.O BOX 3399
TEL: (971-4) 3400700
EMAIL: arabtec@emirates.net.ae
Duties and Responsibilities:
Prepares drawing for progress report, technical submittals and logistic plan.
Prepares Request for Inspection and coordination of architectural, structural MEP plans, shop
drawing and as built plan using REVIT, AutoCAD free hand sketching and sketch up.
Reports to Planning Manager, Technical Manager and Senior Architect.
2. CV – Shadrach Joseph Siguan
Contact - Mobile: +971 564730834 / Email: shadrachjosephsiguan@yahoo.com
2
Prepares design layout for as per site condition and review technical issue.
Review of incoming tender drawings, specifications, and detail drawings.
Perform site visit and meeting.
Position : Architect /CADD
Date : Oct 25, 2011 – Present
Projects : ABU DHABI LOUVRE MUSEUM, AL TAWFIQUE MOSQUE
------------------------------------------------------------------------------------------------------------------------
Company : J&P/CONSPEL W.L.L DOHA QATAR
BUILDING & CIVIL ENGINEERING CONTRACTORS
ELECTROMECHANICAL & PLUMBING SERVICES
P.O.BOX:23100 DOHA, QATAR
TEL: +974-4885190 / 4864127
Duties and Responsibilities:
Prepares architectural, electrical, mechanical & plumbing design plan, tender drawings, shop
drawing and as built plan using REVIT, AutoCAD and free hand sketching.
Performs supervision on-site inspection and Coordination detail plans.
Coordinates to Senior Architect and Engineering consultants on matters about architectural
electrical, plumbing and structural design plans.
Position : Architect / Cadd
Date : Oct 29, 2008 – Feb. 10, 2011
Projects : (THE PEARL QATAR) VILLAS, TOWNHOUSES, APARTMENTS
-----------------------------------------------------------------------------------------------------------------------------------
Company : EX SQUARE Architectural Consultancy Services (Japanese projects)
Rm. 201 AC Bldg. #38 Sct. Ybardolaza St., Timog, Quezon City Philippines
Duties and Responsibilities:
Prepares schematic design plans, site development plans and logistic plan.
Prepare conceptual interior designs and architectural drawings.
Coordinating of Structural & MEP plans.
Provides SPECIFICATION & Material to be used as per approval.
Support tendering process with procurement.
Review and approve all project deliverables and changes.
Report to Senior Head Consultant.
Position : Junior Architect Consultant
3. CV – Shadrach Joseph Siguan
Contact - Mobile: +971 564730834 / Email: shadrachjosephsiguan@yahoo.com
3
Date : May 05, 2006 – Oct. 18, 2008
Projects : HOSPITAL, SHOPPING MALL, LOW RISE CONDOMINIUM, HOTELS
HIGH RISE CONDOMINIUM, RESIDENTIAL & RETAIL.
______________________________________________________________________________
TRAINING PROGRAMS & SEMINARS ATTENTED:
June, 2013 PRIMAVERA P6- R 8.2
May 25, 2013 ESTIDAMA & LEED, SUSTAINABILITY (LEADERSHIP IN ENERGY &
ENVIRONMETAL DESIGN) TRAINING
ASO Louvre Office, Gate-B Saadiyat Island Abu Dhabi, UAE
Oct 25, 2012 DESIGN IDEAS
Al Futtain Center, Dubai, UAE
April, 2005 AUTOCAD TRAINING COURSE
Quezon City, Philippines
Dec. 2005 REVISED NATIONAL BUILDING CODE
Manila, Philippines
Dec. 07, 2005 HEALTH SCIENCE CAMPUS (HOSPITAL PROJECT)
Manila, Philippines
Dec 09, 2004 PLUMBING DESIGN: LAYOUT & DESIGN ON ENGINEERS
Manila, Philippines
______________________________________________________________________________
TECHNICAL SKILLS:
Can prepare project baseline using Primavera P6 R8.2.
Can prepare architectural design and drafting using autoCAD and manuals.
Can prepare 3D designs and render using REVIT, sketch up and v-ray rendering.
Can prepare soft landscaping and irrigation.
Can prepare bill of quantities and estimation.
Can work and prepare in structural, electrical mechanical and plumbing drawings.
Can work in planning team by preparing progress reports drawing.
Can work in logistic team by preparing logistic plan and design solutions.
Career and Goal Oriented, Hardworking and Responsible.
______________________________________________________________________________
PERSONAL INFORMATION:
AGE: 32 SEX: Male
BIRTHDAY: February 27, 1984 BIRTH PLACE: Quezon City, Phil.
NATIONALITY: Filipino STATUS: Married
PASSPORT NO.: EB8783177 NICK NAME: Joseph
4. CV – Shadrach Joseph Siguan
Contact - Mobile: +971 564730834 / Email: shadrachjosephsiguan@yahoo.com
4
SAMPLE OF MY OWN 3D DESIGN PROJECT WORKS PRO
INTERIOR:
EXTERIOR:
ACTUAL: