ANSYS

1. ANSYS
Tutorial

2. Select the static structural option then click on
the engineering data option

3. 1. For adding a new material click on ad
new material and select a option eg.
Isotropic material and define their E and
poisons ratio
2. After defining the material
properties save it and go back to the
projrct page

4. Step 2:- right click on the geometry
option and select New design
modeler geometry option

5. Click on the sketching option and go to
setting, tick on the grid option

6. Click on the draw option
and line option, draw the
sketch with the help on
line tool

7. To fix the dimension click on the
dimension option select general
then slecect line from sketch and
fixed their dimension

8. After drawing the sketch click on
the modelling option then click
on the plane it will show your
sketch

9. 1. Click on the
sketch and go to
the concept and
click on the line
from sketch

10. Click on the generate
option

11. Again go the concep
and create a cross
sections

12. Click on the line
body and go to the
cross section
option and select
the c/s that you
earlier defined.

13. 1. For view the cross
section go the view
option and tick on
cross section solid.
2. Save it and
the page go
back to the
project model

14. Step 3:- click on the model
option

15. Select the Geometry
and click on the line
body and change the
material

16. Click on the
mesh change
the element
size and
generate it

17. 1.Click on static
structural go to the
environment select
the support and
load and applied it

20. Click on
solution
and go to
the probe
select all
the force
and
moment
rxn and
fixed their
boundary
condn

22. Click on solve