(Annexure-62.7) SLIP TRIP FALL CAMPAIGN (1).pptx
•Download as PPTX, PDF•
0 likes•509 views
This document summarizes an incident-based "Slip, Trip, and Fall" safety campaign conducted from June 13 to July 26, 2021 at a pellet plant. The purpose was to increase awareness of slip, trip, and fall hazards and promote safe behaviors. Activities included banner displays, safety sessions, a safety quiz, identifying hazards, slogan and painting competitions, and feedback sessions. Employees were encouraged to find, own, and fix hazards through a "Find It, Own It, Fix It" initiative. As a result of the campaign, hazards were addressed, employee balance and safety awareness improved, and new initiatives like direct interactions between employees and management were implemented. The final message emphasizes the importance of adopting safety today for a
Report
Share
Report
Share
Recommended
New Employee Orientation 05
The document provides an overview of safety policies and procedures for new hires at Control Flow Inc. It outlines proper procedures and personal protective equipment requirements for various machinery, chemical handling, injury reporting, and other potential hazards. Non-compliance with safety rules could result in disciplinary action up to and including termination.
Safe work-at-heights-presentation
Falls from heights are a major cause of injuries and fatalities. This document outlines regulations and best practices for working safely at heights. It defines fall hazards and introduces a new five-level hierarchy of controls. The highest levels involve eliminating falls or using passive fall prevention devices. Lower levels like ladders should only be used as a last resort. The document provides examples of common fall hazards and injuries in the department and recommends control measures like staying off roofs and using long-handled tools to access high areas instead of ladders whenever possible.
Workplace hazards
Accidents can occur anywhere and result from unsafe acts or conditions. Unsafe acts include faulty work habits, careless working, improper handling of materials, and not using proper protective equipment. Unsafe conditions are physical hazards caused by issues like slippery floors, poor housekeeping, unguarded equipment, and lack of safety devices. Hazards are anything that could hurt you or make you sick, such as things that can cut, trip, burn, or crush you, or damage your hearing, eyes, or health. With awareness of hazards and safety precautions, many accidents can be prevented.
working at height
Working at height safety is important to prevent falls which can cause serious injury or death. Fall hazards exist in many work environments and proper precautions should be taken which may include fall protection equipment like harnesses, lanyards, lifelines, barricades, and properly secured ladders. Employers must inspect for fall hazards and provide training to workers on fall prevention methods appropriate for each job. Rescue plans should also be in place in case a fall occurs.
Work at height whose concern.
Safety is Integral part of all projects in Kenya, but the people have an attitude. We should understand that safety is for our own Good. Your Best bodyguard is your own self. Do not take chances, Live life and live abundantly
General Safety Presentationupdated 04842993 1
The document outlines various workplace safety guidelines and procedures. It discusses the importance of working safely, proper personal protective equipment, emergency evacuation plans, safe operation of equipment like forklifts, identifying and avoiding death zones, lockout/tagout procedures, hazard communication, and medical emergencies. Disciplinary action may result from disregarding safety rules.
Working at heights training powerpoint
This document outlines requirements and safety procedures for working at heights. It discusses proper fall protection equipment like harnesses and lifelines, as well as safety protocols like hazard identification checklists and permits. Temporary anchor points must be approved and capable of withstanding significant loads. Proper PPE like hard hats is required, and workers must be trained before working alone or using fall arrest vs. restraint systems.
A Part 1 Safety Induction
Three key points from the document:
1. Safety is important to prevent accidents in the workplace caused by negligence, poor training, unsafe equipment or behaviors. Most accidents follow a pattern of lack of management controls, unsafe acts or conditions, and result in losses.
2. Employers and employees have legal duties under health and safety laws to protect workers and others from risks. This includes conducting risk assessments, implementing controls, providing training, and following safe systems of work.
3. Ignoring safety risks and procedures is against the law and can lead to prosecution, fines, injuries or even death for those involved and affected. All workers are responsible for keeping themselves and others safe by raising concerns and following safety rules.
Recommended
New Employee Orientation 05
The document provides an overview of safety policies and procedures for new hires at Control Flow Inc. It outlines proper procedures and personal protective equipment requirements for various machinery, chemical handling, injury reporting, and other potential hazards. Non-compliance with safety rules could result in disciplinary action up to and including termination.
Safe work-at-heights-presentation
Falls from heights are a major cause of injuries and fatalities. This document outlines regulations and best practices for working safely at heights. It defines fall hazards and introduces a new five-level hierarchy of controls. The highest levels involve eliminating falls or using passive fall prevention devices. Lower levels like ladders should only be used as a last resort. The document provides examples of common fall hazards and injuries in the department and recommends control measures like staying off roofs and using long-handled tools to access high areas instead of ladders whenever possible.
Workplace hazards
Accidents can occur anywhere and result from unsafe acts or conditions. Unsafe acts include faulty work habits, careless working, improper handling of materials, and not using proper protective equipment. Unsafe conditions are physical hazards caused by issues like slippery floors, poor housekeeping, unguarded equipment, and lack of safety devices. Hazards are anything that could hurt you or make you sick, such as things that can cut, trip, burn, or crush you, or damage your hearing, eyes, or health. With awareness of hazards and safety precautions, many accidents can be prevented.
working at height
Working at height safety is important to prevent falls which can cause serious injury or death. Fall hazards exist in many work environments and proper precautions should be taken which may include fall protection equipment like harnesses, lanyards, lifelines, barricades, and properly secured ladders. Employers must inspect for fall hazards and provide training to workers on fall prevention methods appropriate for each job. Rescue plans should also be in place in case a fall occurs.
Work at height whose concern.
Safety is Integral part of all projects in Kenya, but the people have an attitude. We should understand that safety is for our own Good. Your Best bodyguard is your own self. Do not take chances, Live life and live abundantly
General Safety Presentationupdated 04842993 1
The document outlines various workplace safety guidelines and procedures. It discusses the importance of working safely, proper personal protective equipment, emergency evacuation plans, safe operation of equipment like forklifts, identifying and avoiding death zones, lockout/tagout procedures, hazard communication, and medical emergencies. Disciplinary action may result from disregarding safety rules.
Working at heights training powerpoint
This document outlines requirements and safety procedures for working at heights. It discusses proper fall protection equipment like harnesses and lifelines, as well as safety protocols like hazard identification checklists and permits. Temporary anchor points must be approved and capable of withstanding significant loads. Proper PPE like hard hats is required, and workers must be trained before working alone or using fall arrest vs. restraint systems.
A Part 1 Safety Induction
Three key points from the document:
1. Safety is important to prevent accidents in the workplace caused by negligence, poor training, unsafe equipment or behaviors. Most accidents follow a pattern of lack of management controls, unsafe acts or conditions, and result in losses.
2. Employers and employees have legal duties under health and safety laws to protect workers and others from risks. This includes conducting risk assessments, implementing controls, providing training, and following safe systems of work.
3. Ignoring safety risks and procedures is against the law and can lead to prosecution, fines, injuries or even death for those involved and affected. All workers are responsible for keeping themselves and others safe by raising concerns and following safety rules.
Safety Week Activity Report
Safety Week 2015 was held from May 4-8 at MLC-WH. Activities included:
1) An opening address and presentation on warehouse safety.
2) Training sessions on back safety, fire safety, ergonomics, and 5S housekeeping.
3) Practical drills like a fire drill and fire hydrant drill.
4) A safety talk and competition where Muhammad Sajid Khan was named Safety Champion.
5) Site visits and sessions to promote safety leadership and awareness.
A Complete Guide to Working at Height Regulations by At-Height
The document provides an overview of UK regulations for working at height. It defines working at height as any work where a person could fall and risk injury. The Work at Height Regulations 2005 establish guidelines for employers to prevent falls from height and ensure safety. These include assessing risks, having appropriate safety measures like PPE, ensuring workers are competent, and not working on fragile surfaces. A hierarchy of control measures is also outlined, ranging from avoiding working at height to properly training workers. The responsibilities of both employers and employees are defined to maintain a safe working environment.
Haad height aware - eng
This manual provides guidance on working safely at heights for occupational health and safety professionals and supervisors. It covers definitions of working at heights, common risks such as falls from heights and falling objects, and best practices for prevention. The manual aims to help raise awareness of the dangers of working at heights and provide information on procedures and controls to prevent falls and injuries from working at heights. It addresses a variety of sectors where working at heights is common, such as construction, agriculture, industrial and commercial settings.
Working at-height
The document defines work at height as any work performed 1.8 meters or more above ground level, including below ground. Work above 1.8 meters requires a permit and safety checklist. Fall distances increase rapidly with time, emphasizing the need for fall protection like railings, safety harnesses attached to lifelines, and safety nets. Proper planning, equipment, and rescue procedures are required for working at heights.
Safe operating of forklift
The document discusses forklift operation safety. It begins by describing how a forklift operates and some of its key components. It then discusses potential hazards of forklift operation, including workplace hazards, load hazards, and pedestrians. The document provides guidance on safely operating forklifts, such as only allowing trained operators, controlling forklift speed, ensuring stability of loads, and using caution around other workers. It emphasizes the importance of forklift inspections and maintenance to identify any issues.
Moving equipment around the site
This document provides training on safety requirements for spotters assisting with heavy equipment operation on construction sites. It outlines that spotters are needed when operators do not have full visibility and to help prevent accidents that are a leading cause of death. The training covers OSHA regulations for spotters, including using visual aids and effective communication. It also details requirements such as spotters wearing high-visibility vests and using standardized hand signals to direct equipment operators. The goal is to ensure spotters and operators work together closely to follow safety practices and prevent injuries or deaths from heavy machinery.
A Part 6 Lifting Operations
This document outlines regulations and guidelines for safe lifting operations and the use of lifting appliances. It discusses requirements for equipment strength and stability, prevention of injuries, thorough inspections and examinations. Various types of cranes and their safety devices are described. Factors to consider when selecting cranes include load size, lift heights and durations. Proper planning, supervision and safe practices are required for all lifting operations.
Forklift safety
Forklift operators must be properly trained and licensed. They should conduct routine checks of equipment like brakes, steering, controls, and for potential leaks. Personal protective equipment like safety shoes, helmets, ear plugs, and reflective jackets must be worn. When operating the forklift, drivers should follow all site rules and guidelines, go slowly around corners and turns, and not exceed the speed limit. Loads must be checked for stability before moving and damages items should not be lifted. The forklift should be parked in designated areas with forks lowered and brake applied.
Staff safety hand book
This document provides an introduction and contents for a health and safety training. The introduction discusses how accidents can cause suffering and how all hazardous situations must be identified and corrected. It emphasizes employees' responsibility to comply with health and safety requirements.
The contents section lists 28 topics that will be covered in the training, including health and safety policies, duties and responsibilities, personal protective equipment, permits to work, first aid, and fire prevention. The training aims to help employees fulfill their obligation to work safely.
10 Forklift Safety Rules - A Review
We all know that many companies employ forklifts and that forklift operators do the main bulk of this kind of labor. These machines are powerful and there is always risk involved when they are used by people who have not been trained on operating them safely.
The National Traumatic Occupational Surveillance System registered 1530 worker deaths from forklift accidents between the years 1980 and 2001. Of these accidents, the biggest portion at 22%, most were caused by a forklift overturn.
Collisions between workers on the ground where the ground worker died accounted for 20% of deaths. Another 16% of deaths were caused by someone being crushed by the forklift and 9% by an operator falling from the forklift.
In fact, each year almost 100 people are killed and another 20,000 injured from forklift accidents. With proper training and diligent safety practices most of these deaths could have been prevented.
If you work around forklifts or are a forklift operator you should learn all you can about using these machines safely to prevent injury or death. All forklifts fall under the category of ‘powered industrial trucks,’ but they are not all the same. Forklifts can be either battery powered or run on gas or diesel fuel.
They also come in different sizes and have different functions according to the kind of work in which they will be used. Each type of lift is characterized by a class. Knowing which class of forklift you will work with should help you to understand its safety features and potential hazards.
We encourage you to ask your forklift drivers to take a look at these 10 easy-to-remember rules and to do their best to follow them at all times.
More forklift safety resources:
https://www.creativesafetysupply.com/articles/forklift-safetytips/
https://www.creativesafetysupply.com/infographics/forklift-accidents-causes-prevention/
https://www.creativesafetysupply.com/resources/forklift-safety
https://www.forkliftsafety101.com/
Ladder Safety- Safety First!
This document provides an overview of ladder safety. It discusses that over 1 death and 65,000 injuries occur per year from ladder falls. It outlines OSHA regulations for fixed ladders and portable wood, metal, and reinforced plastic ladders. Portable ladders can be single, extension, stepladders, and are selected based on the work surface and load capacity. Ladders must be inspected before each use and stored properly to prevent damage. Proper climbing and carrying techniques are also covered.
Health and safety induction
This health and safety induction covers various workplace hazards and safety procedures. It discusses evacuation plans, common accident types, safety signage, hazards like working at heights and with chemicals/electricity. Proper use of ladders, scaffolds, protective equipment and incident reporting are outlined. Manual handling, fire safety and the importance of prevention are also emphasized. The goal is to educate workers and promote a safety-focused culture.
Behavior Based Safety
This document discusses behavior-based safety (BBS) approaches. It begins by outlining the objectives of understanding the benefits of BBS, basic principles for motivating safe behavior, assessing organizational readiness, and comparing different BBS systems. It then discusses why traditional safety programs often do not work and explores common "fallacies" regarding safety. Core elements of successful safety programs are outlined, including safety culture and accountability. The rest of the document delves into BBS concepts like antecedents, behaviors, consequences and reinforcement. It examines models for understanding accident causation and human motivation. Benefits of BBS like significant injury reductions are presented. Key aspects of implementing BBS like roles, features, and assessing organizational readiness are covered
Ses safety induction
This induction presentation provides an overview of general safety rules and procedures for workers at S.E.S. Labour Solutions. It discusses obligations under workplace health and safety laws, reporting requirements for incidents and unsafe conditions, fitness for work, unacceptable behaviors, and proper use of personal protective equipment. Specific hazards covered include manual handling, working at heights, electricity, compressed air, chemicals, vehicles, rotating machinery, fire, first aid, and lock out/tag out procedures. The presentation emphasizes taking responsibility for safety, complying with instructions, and identifying hazards in the workplace. It concludes with a reminder to complete the assessment after reviewing the material.
Fall Protection by Osha
This document discusses fall protection in construction. Falls are the leading cause of death in construction. If workers can fall more than 6 feet, fall protection is required. Fall protection options include guardrails, safety nets, and personal fall arrest systems. The document outlines when fall protection is needed for activities like working on roofs, walls, walkways, excavations and other situations where falls of more than 6 feet are possible. Employers must provide training to help workers recognize fall hazards and properly use fall protection devices.
Work At Height Regulations
The document discusses regulations around work at height in the UK. It outlines that falls from height are a major cause of workplace fatalities and injuries. The Work at Height Regulations of 2005 aim to reduce risks by requiring fall prevention plans, risk assessments, proper equipment selection, worker training, and prioritizing collective protection over personal protection. The regulations apply across various industries and seek to avoid work at height if possible and prevent falls through safe work planning, equipment, and procedures.
Man and machine interface
Man and Machine Interface
Working around heavy equipment can be extremely dangerous. Too many workers are killed each year when they are run over or struck by these pieces of machinery. It’s important to know the safety precautions to take when working in the vicinity of heavy equipment such as dump trucks, front-end loaders, cranes, Excavator, Bob Cat, Forklift, Concrete Mixture Truck, other heavy trucks/Equipment's, etc.
Hse alert 43 forklift safety
Forklifts are extremely useful workplace vehicles, as long as they are used safely and properly by operators who have been trained and are deemed competent to use them. Forklifts are dangerous: they account for 25% of injuries at work. Many workplace accidents involve people being hit or run over by forklift trucks (typically when the forklift is reversing). Forklift accidents can cause serious injury, death, property and product damage. Accidents can be prevented if risk assessment are conducted, safe work procedures are followed, regular Tool Box Talks are conducted and HSE continuous surveillance observations of work tasks are performed periodically.
Common Forklift Hazards:
• Overloading
• Unsafe Stacking
• Speeding
• Unauthorized operation of forklift
• Untrained forklift operators.
• Pedestrians and forklifts moving in the same place.
• Obstruction in the path e.g. overhead, uneven ground surfaces, blind corners etc.
• Reversing
Common Safe Practices:
• Prior to use, forklifts must be inspected by a competent person, & inspection sticker should be posted on it.
• Only trained and authorized operators can operate a forklift.
• Carry out daily forklift pre-operation checks using checklist.
• Report to supervisor any forklift damage or problem.
• Don’t use a forklift to lift a worker.
• Check the load loads carefully before moving them for stability and damage.
• Slow down and sound the horn at crossings, and locations where view is blocked.
• Do not authorize anyone to stand or walk under the load or forklift machinery.
• Be aware of the height of the load, mast and overhead guard of the forklift when entering or existing buildings.
• Don’t handle loads that are above the weight capacity of the forklift.
• Follow the speed limit.
• Flagmen must be available while forklift is in operation.
• Focus on the travelling path and keep a clear view of it.
• When leaving a forklift, pull the parking brake, lower the forks and neutralize the controls.
• Don’t drive and raise load at the same time
• Don’t make sudden sharp turns
• Don’t brake suddenly when the forklift is loaded.
• Watch out for overhead structures (e.g. pipes & beams)
• Follow traffic management.
• Use rear view mirrors and camera while reversing.
Health and safety powerpoint complete (1)
This presentation provides an overview of environmental health and safety topics for employees. It begins by explaining the importance of safety training and responsibilities of both employers and employees. It then covers a range of safety issues including vehicle safety, driving hazards, office ergonomics, fire safety, hazardous materials, and more. The document emphasizes that safety is a shared responsibility and provides contact information for the environmental health and safety committee.
Worker safety hand book
This document provides a summary of health and safety guidelines for employees. It begins by emphasizing that accidents can cause suffering and that safety should not be compromised for any reason. The document then outlines various safety policies and procedures for employees to follow, including proper use of personal protective equipment, working at heights, electrical safety, fire prevention, plant and machinery operation, and more. Employees are asked to acknowledge receiving the handbook and agreeing to comply with all health and safety requirements.
Slips trips falls
This document summarizes slip, trip, and fall incident data and costs for a company from 2010 to 2014. It shows that over this period there were 51 total incidents, with slip/trip/fall incidents accounting for 40% of the total. It provides details on each slip/trip/fall incident, including date, occupation, injury description, injured body part, and associated costs. The highest costs were seen in 2010 and 2011. The document emphasizes that safety is everyone's responsibility and provides tips to prevent slip/trip/fall incidents like wearing appropriate footwear and keeping work areas clean and hazard-free.
Job safety analysis
What is JSA?
A Job Safety Analysis is a task-oriented risk assessment used to review the hazards associated with a particular work task, and to verify that adequate safeguards are in place to control those hazards.
JSAs are known by a variety of terms, including Job Hazard Analysis (JHA), Job Risk Assessment (JRA), Task Risk Assessment (TRA), Safe Job Analysis (SJA).
Job Safety Analysis and its Implementation
INVOLVE employees in the development
KEEP written JSA short and simple
ILLUSTRATE safe practices
ASSIGN responsibility of JSA
TRAIN all employees and supervisors
EXPLAIN the use of JSA to employees
IMPLEMENT safe work practices
REVIEW JSA when equipment or process changes or new information becomes available regarding potential hazards associated with the job.
More Related Content
What's hot
Safety Week Activity Report
Safety Week 2015 was held from May 4-8 at MLC-WH. Activities included:
1) An opening address and presentation on warehouse safety.
2) Training sessions on back safety, fire safety, ergonomics, and 5S housekeeping.
3) Practical drills like a fire drill and fire hydrant drill.
4) A safety talk and competition where Muhammad Sajid Khan was named Safety Champion.
5) Site visits and sessions to promote safety leadership and awareness.
A Complete Guide to Working at Height Regulations by At-Height
The document provides an overview of UK regulations for working at height. It defines working at height as any work where a person could fall and risk injury. The Work at Height Regulations 2005 establish guidelines for employers to prevent falls from height and ensure safety. These include assessing risks, having appropriate safety measures like PPE, ensuring workers are competent, and not working on fragile surfaces. A hierarchy of control measures is also outlined, ranging from avoiding working at height to properly training workers. The responsibilities of both employers and employees are defined to maintain a safe working environment.
Haad height aware - eng
This manual provides guidance on working safely at heights for occupational health and safety professionals and supervisors. It covers definitions of working at heights, common risks such as falls from heights and falling objects, and best practices for prevention. The manual aims to help raise awareness of the dangers of working at heights and provide information on procedures and controls to prevent falls and injuries from working at heights. It addresses a variety of sectors where working at heights is common, such as construction, agriculture, industrial and commercial settings.
Working at-height
The document defines work at height as any work performed 1.8 meters or more above ground level, including below ground. Work above 1.8 meters requires a permit and safety checklist. Fall distances increase rapidly with time, emphasizing the need for fall protection like railings, safety harnesses attached to lifelines, and safety nets. Proper planning, equipment, and rescue procedures are required for working at heights.
Safe operating of forklift
The document discusses forklift operation safety. It begins by describing how a forklift operates and some of its key components. It then discusses potential hazards of forklift operation, including workplace hazards, load hazards, and pedestrians. The document provides guidance on safely operating forklifts, such as only allowing trained operators, controlling forklift speed, ensuring stability of loads, and using caution around other workers. It emphasizes the importance of forklift inspections and maintenance to identify any issues.
Moving equipment around the site
This document provides training on safety requirements for spotters assisting with heavy equipment operation on construction sites. It outlines that spotters are needed when operators do not have full visibility and to help prevent accidents that are a leading cause of death. The training covers OSHA regulations for spotters, including using visual aids and effective communication. It also details requirements such as spotters wearing high-visibility vests and using standardized hand signals to direct equipment operators. The goal is to ensure spotters and operators work together closely to follow safety practices and prevent injuries or deaths from heavy machinery.
A Part 6 Lifting Operations
This document outlines regulations and guidelines for safe lifting operations and the use of lifting appliances. It discusses requirements for equipment strength and stability, prevention of injuries, thorough inspections and examinations. Various types of cranes and their safety devices are described. Factors to consider when selecting cranes include load size, lift heights and durations. Proper planning, supervision and safe practices are required for all lifting operations.
Forklift safety
Forklift operators must be properly trained and licensed. They should conduct routine checks of equipment like brakes, steering, controls, and for potential leaks. Personal protective equipment like safety shoes, helmets, ear plugs, and reflective jackets must be worn. When operating the forklift, drivers should follow all site rules and guidelines, go slowly around corners and turns, and not exceed the speed limit. Loads must be checked for stability before moving and damages items should not be lifted. The forklift should be parked in designated areas with forks lowered and brake applied.
Staff safety hand book
This document provides an introduction and contents for a health and safety training. The introduction discusses how accidents can cause suffering and how all hazardous situations must be identified and corrected. It emphasizes employees' responsibility to comply with health and safety requirements.
The contents section lists 28 topics that will be covered in the training, including health and safety policies, duties and responsibilities, personal protective equipment, permits to work, first aid, and fire prevention. The training aims to help employees fulfill their obligation to work safely.
10 Forklift Safety Rules - A Review
We all know that many companies employ forklifts and that forklift operators do the main bulk of this kind of labor. These machines are powerful and there is always risk involved when they are used by people who have not been trained on operating them safely.
The National Traumatic Occupational Surveillance System registered 1530 worker deaths from forklift accidents between the years 1980 and 2001. Of these accidents, the biggest portion at 22%, most were caused by a forklift overturn.
Collisions between workers on the ground where the ground worker died accounted for 20% of deaths. Another 16% of deaths were caused by someone being crushed by the forklift and 9% by an operator falling from the forklift.
In fact, each year almost 100 people are killed and another 20,000 injured from forklift accidents. With proper training and diligent safety practices most of these deaths could have been prevented.
If you work around forklifts or are a forklift operator you should learn all you can about using these machines safely to prevent injury or death. All forklifts fall under the category of ‘powered industrial trucks,’ but they are not all the same. Forklifts can be either battery powered or run on gas or diesel fuel.
They also come in different sizes and have different functions according to the kind of work in which they will be used. Each type of lift is characterized by a class. Knowing which class of forklift you will work with should help you to understand its safety features and potential hazards.
We encourage you to ask your forklift drivers to take a look at these 10 easy-to-remember rules and to do their best to follow them at all times.
More forklift safety resources:
https://www.creativesafetysupply.com/articles/forklift-safetytips/
https://www.creativesafetysupply.com/infographics/forklift-accidents-causes-prevention/
https://www.creativesafetysupply.com/resources/forklift-safety
https://www.forkliftsafety101.com/
Ladder Safety- Safety First!
This document provides an overview of ladder safety. It discusses that over 1 death and 65,000 injuries occur per year from ladder falls. It outlines OSHA regulations for fixed ladders and portable wood, metal, and reinforced plastic ladders. Portable ladders can be single, extension, stepladders, and are selected based on the work surface and load capacity. Ladders must be inspected before each use and stored properly to prevent damage. Proper climbing and carrying techniques are also covered.
Health and safety induction
This health and safety induction covers various workplace hazards and safety procedures. It discusses evacuation plans, common accident types, safety signage, hazards like working at heights and with chemicals/electricity. Proper use of ladders, scaffolds, protective equipment and incident reporting are outlined. Manual handling, fire safety and the importance of prevention are also emphasized. The goal is to educate workers and promote a safety-focused culture.
Behavior Based Safety
This document discusses behavior-based safety (BBS) approaches. It begins by outlining the objectives of understanding the benefits of BBS, basic principles for motivating safe behavior, assessing organizational readiness, and comparing different BBS systems. It then discusses why traditional safety programs often do not work and explores common "fallacies" regarding safety. Core elements of successful safety programs are outlined, including safety culture and accountability. The rest of the document delves into BBS concepts like antecedents, behaviors, consequences and reinforcement. It examines models for understanding accident causation and human motivation. Benefits of BBS like significant injury reductions are presented. Key aspects of implementing BBS like roles, features, and assessing organizational readiness are covered
Ses safety induction
This induction presentation provides an overview of general safety rules and procedures for workers at S.E.S. Labour Solutions. It discusses obligations under workplace health and safety laws, reporting requirements for incidents and unsafe conditions, fitness for work, unacceptable behaviors, and proper use of personal protective equipment. Specific hazards covered include manual handling, working at heights, electricity, compressed air, chemicals, vehicles, rotating machinery, fire, first aid, and lock out/tag out procedures. The presentation emphasizes taking responsibility for safety, complying with instructions, and identifying hazards in the workplace. It concludes with a reminder to complete the assessment after reviewing the material.
Fall Protection by Osha
This document discusses fall protection in construction. Falls are the leading cause of death in construction. If workers can fall more than 6 feet, fall protection is required. Fall protection options include guardrails, safety nets, and personal fall arrest systems. The document outlines when fall protection is needed for activities like working on roofs, walls, walkways, excavations and other situations where falls of more than 6 feet are possible. Employers must provide training to help workers recognize fall hazards and properly use fall protection devices.
Work At Height Regulations
The document discusses regulations around work at height in the UK. It outlines that falls from height are a major cause of workplace fatalities and injuries. The Work at Height Regulations of 2005 aim to reduce risks by requiring fall prevention plans, risk assessments, proper equipment selection, worker training, and prioritizing collective protection over personal protection. The regulations apply across various industries and seek to avoid work at height if possible and prevent falls through safe work planning, equipment, and procedures.
Man and machine interface
Man and Machine Interface
Working around heavy equipment can be extremely dangerous. Too many workers are killed each year when they are run over or struck by these pieces of machinery. It’s important to know the safety precautions to take when working in the vicinity of heavy equipment such as dump trucks, front-end loaders, cranes, Excavator, Bob Cat, Forklift, Concrete Mixture Truck, other heavy trucks/Equipment's, etc.
Hse alert 43 forklift safety
Forklifts are extremely useful workplace vehicles, as long as they are used safely and properly by operators who have been trained and are deemed competent to use them. Forklifts are dangerous: they account for 25% of injuries at work. Many workplace accidents involve people being hit or run over by forklift trucks (typically when the forklift is reversing). Forklift accidents can cause serious injury, death, property and product damage. Accidents can be prevented if risk assessment are conducted, safe work procedures are followed, regular Tool Box Talks are conducted and HSE continuous surveillance observations of work tasks are performed periodically.
Common Forklift Hazards:
• Overloading
• Unsafe Stacking
• Speeding
• Unauthorized operation of forklift
• Untrained forklift operators.
• Pedestrians and forklifts moving in the same place.
• Obstruction in the path e.g. overhead, uneven ground surfaces, blind corners etc.
• Reversing
Common Safe Practices:
• Prior to use, forklifts must be inspected by a competent person, & inspection sticker should be posted on it.
• Only trained and authorized operators can operate a forklift.
• Carry out daily forklift pre-operation checks using checklist.
• Report to supervisor any forklift damage or problem.
• Don’t use a forklift to lift a worker.
• Check the load loads carefully before moving them for stability and damage.
• Slow down and sound the horn at crossings, and locations where view is blocked.
• Do not authorize anyone to stand or walk under the load or forklift machinery.
• Be aware of the height of the load, mast and overhead guard of the forklift when entering or existing buildings.
• Don’t handle loads that are above the weight capacity of the forklift.
• Follow the speed limit.
• Flagmen must be available while forklift is in operation.
• Focus on the travelling path and keep a clear view of it.
• When leaving a forklift, pull the parking brake, lower the forks and neutralize the controls.
• Don’t drive and raise load at the same time
• Don’t make sudden sharp turns
• Don’t brake suddenly when the forklift is loaded.
• Watch out for overhead structures (e.g. pipes & beams)
• Follow traffic management.
• Use rear view mirrors and camera while reversing.
Health and safety powerpoint complete (1)
This presentation provides an overview of environmental health and safety topics for employees. It begins by explaining the importance of safety training and responsibilities of both employers and employees. It then covers a range of safety issues including vehicle safety, driving hazards, office ergonomics, fire safety, hazardous materials, and more. The document emphasizes that safety is a shared responsibility and provides contact information for the environmental health and safety committee.
Worker safety hand book
This document provides a summary of health and safety guidelines for employees. It begins by emphasizing that accidents can cause suffering and that safety should not be compromised for any reason. The document then outlines various safety policies and procedures for employees to follow, including proper use of personal protective equipment, working at heights, electrical safety, fire prevention, plant and machinery operation, and more. Employees are asked to acknowledge receiving the handbook and agreeing to comply with all health and safety requirements.
What's hot (20)
A Complete Guide to Working at Height Regulations by At-Height
A Complete Guide to Working at Height Regulations by At-Height
Similar to (Annexure-62.7) SLIP TRIP FALL CAMPAIGN (1).pptx
Slips trips falls
This document summarizes slip, trip, and fall incident data and costs for a company from 2010 to 2014. It shows that over this period there were 51 total incidents, with slip/trip/fall incidents accounting for 40% of the total. It provides details on each slip/trip/fall incident, including date, occupation, injury description, injured body part, and associated costs. The highest costs were seen in 2010 and 2011. The document emphasizes that safety is everyone's responsibility and provides tips to prevent slip/trip/fall incidents like wearing appropriate footwear and keeping work areas clean and hazard-free.
Job safety analysis
What is JSA?
A Job Safety Analysis is a task-oriented risk assessment used to review the hazards associated with a particular work task, and to verify that adequate safeguards are in place to control those hazards.
JSAs are known by a variety of terms, including Job Hazard Analysis (JHA), Job Risk Assessment (JRA), Task Risk Assessment (TRA), Safe Job Analysis (SJA).
Job Safety Analysis and its Implementation
INVOLVE employees in the development
KEEP written JSA short and simple
ILLUSTRATE safe practices
ASSIGN responsibility of JSA
TRAIN all employees and supervisors
EXPLAIN the use of JSA to employees
IMPLEMENT safe work practices
REVIEW JSA when equipment or process changes or new information becomes available regarding potential hazards associated with the job.
Risk assessment
The document discusses risk assessment considerations for filming a music video. It identifies potential hazards from props, liquids, food, costumes, technical equipment, tripods, location, and performers. Props, liquids, food, costumes and equipment need to be stored carefully when not in use to prevent damage, loss or injury. Tripods require proper bags for transport and flat surfaces for stability. Locations need to be checked for safety hazards. Performers must be aware of their environment and properly warm up.
Preventing Falls, Slips and Trips by MGSU
This document discusses preventing falls, slips, and trips (FSTs) in the workplace. It notes that FSTs accounted for over $5 million in workers' compensation costs in Georgia in 2011 and were the leading cause of injuries. It identifies common causes of FSTs like wet or slippery surfaces, uneven walking areas, clutter, and poor lighting. The document provides guidance on prevention strategies like maintaining good housekeeping, wearing appropriate footwear, fixing hazards, and paying attention while walking. It emphasizes that FSTs can often be prevented through awareness of risks and applying basic safety practices.
Preventing Falls, Slips and Trips by MGSU
This document discusses preventing falls, slips, and trips (FSTs) in the workplace. It notes that FSTs accounted for over $5 million in workers' compensation costs in Georgia in 2011 and were the leading cause of injuries. It identifies common causes of FSTs like wet or slippery surfaces, uneven walking areas, clutter, and poor lighting. The document provides guidance on prevention strategies like maintaining good housekeeping, wearing appropriate footwear, fixing hazards, and paying attention while walking. It emphasizes that FSTs can often be prevented through awareness of risks and applying basic safety practices.
Slips, Trips, and Falls
This document discusses slip, trip, and fall hazards and provides guidance on prevention. It notes that weather conditions like wet floors or ice can cause slipping. Tripping hazards include damaged steps or misplaced items. Falls can result from broken equipment or climbing on unstable surfaces. The document recommends wearing appropriate footwear, cleaning spills, keeping aisles clear, and reporting any issues to supervisors.
Hazard Form
This document provides a template for conducting a risk assessment for filming activities. It lists common hazards that could be present during different scenes, who may be harmed, what property could be damaged, existing risk controls, and a risk assessment level. Hazards addressed include slipping or falling on equipment, camera damage from rain, tripping in the dark, getting stung by nettles, dog attacks, and hair getting caught in equipment. For each hazard, the document suggests further actions that could be taken based on the risk level. The goal is to identify risks and put controls in place to protect people, equipment and property.
Risk Assessment
This document contains 9 risk assessments for potential hazards during the filming of an imagined music video project. Key hazards identified include tripping or falling at various outdoor locations like a lake, woods, and churchyard. Indoor hazards include tripping on furniture and accidental contact during staged fighting scenes. Measures are outlined to prevent injuries like wearing proper footwear and safety gear, rehearsing scenes, and having first aid supplies on hand. Jade is identified as responsible for ensuring all safety protocols are followed.
Risk Management in Premises Liability
Premises Liability and Risk Management
Premises-liability" law covers any type of claim that results from an allegedly "unreasonably dangerous condition" on the property. While commercial facilities such as grocery and retail stores, restaurants and malls are the most common targets due to the large volume of customers that enter their stores, all business owners who have a physical business location are at risk. But so are home owners and landlords, when guests or renters get injured because of some property condition.
Premises-liability claims typically are made by customers, employees, guests or tenants who sustain personal injuries as a result of a:
Slip, Trip and Fall Event
Malfunctioning Equipment
Falling Objects
Poor Lighting
Risk assesment for Car Park
This risk assessment summarizes the hazards and control measures for filming a music video in the Ashfield School car park on February 5th at 5:00pm. Key hazards identified include impaired vision from low lighting, moving vehicles in the car park, slippery conditions if weather is poor, and tripping over equipment or bags. Control measures to address these include using additional lighting, wearing high-visibility clothing, choosing appropriate footwear, and securing bags and equipment away from walking areas. The risk assessment rates traffic in the busy car park and moving vehicles as high risks even with controls, requiring continued monitoring during the event.
Risk Mgmnt&Pl 08 Dba Pr
“Risk Management in Premises Liability”
Requires Quality Control in Design, Construction & Maintenance
Slip and Fall Accidents caused by slippery floors, standing water and foreign objects, ice and snow.
Trip and Fall Accidents caused by uneven floor surfaces, faulty steps, poor lighting and house keeping.
Falling objects from store shelves, adjacent construction work, dead or dying trees.
Malfunctioning equipment, including automatic door closures, escalators and elevators.
Lack of security, insufficient lighting and surveillance, lack of access controls and building and grounds features enabling criminal intent or facilitating accidents.
Pool drowning.
Slips, Trips, and Falls - Workplace Safety
This document provides information on how to prevent slips, trips, and falls. It discusses common causes of slips such as wet floors or icy conditions. Trips may be caused by damaged steps or objects left on stairways. Falls can result from hazards like broken chairs or unstable ladders. The document recommends wearing appropriate footwear, keeping walkways clear of clutter, cleaning spills immediately, and reporting any unsafe conditions to a supervisor.
Risk assessment
This document provides a template for assessing risks associated with film production activities. It involves identifying hazards, who or what may be harmed, existing controls, and determining the risk level. Example hazards listed include traveling by train or bus and filming at locations like a dam, locks, and abandoned buildings. For each hazard, the relevant scenes, potential impacts, existing safety measures, and risk assessment level are outlined. Actions are recommended based on whether the risk is extreme, high, moderate, or low.
Risk assessment sarah murray
This document provides a template for assessing risks associated with film production activities. It involves identifying hazards, who or what may be harmed, existing controls, and determining the risk level. Example hazards listed include traveling by train or bus and filming at locations like a dam, locks, and abandoned buildings. For each hazard, the relevant scenes, potential impacts to people and equipment, existing safety measures, and risk level are outlined. Actions may then be identified based on whether a risk is extreme, high, moderate, or low.
Risk Assessment by Sarah murray
This document provides a template for assessing risks associated with film production activities. It involves identifying hazards, who or what may be harmed, existing controls, and determining the risk level. Example hazards listed include traveling by train or bus and filming at locations like a dam, locks, and abandoned buildings. For each hazard, the relevant scenes, potential impacts, existing safety measures, and risk assessment level are outlined. Actions are recommended based on whether the risk is extreme, high, moderate, or low.
Backing Collisions Presentation
This document discusses tips and statistics around backing collisions for vehicles. It notes that one out of four accidents can be blamed on poor backing techniques. Backing collisions cost an average of $7,400 per event. The document provides tips to help avoid backing collisions such as walking completely around the vehicle before backing up, using mirrors properly, backing slowly, and getting out of the vehicle to check clearances when possible. Most backing collisions are preventable if drivers take proper precautions while backing.
Risk assessment
This risk assessment document identifies several potential hazards for a film production called "The Dilemma" including road traffic, weather conditions like rain and wind, bodies of water, fire, and transportation. For each hazard, it lists possible injuries or damage, preventative measures being taken, the number of people at risk, and who is responsible. The producer, Steph Webb, conducted the assessment to help ensure the safety of all those involved in the production.
Film production risk_assessment_ig2_
The document provides a template for conducting a risk assessment for a film production. It involves identifying hazards, who or what may be harmed, existing controls, assigning a risk level, and further actions needed. Hazards identified for an outdoor shoot include slippery wooden platforms and tripping hazards, water and weather conditions like rain and ice increasing slip hazards, the possibility of lightning, wind interfering with filming, disruptions from dogs or people, and injury from climbing trees for shots. High risks require additional controls while low risks may require minimal further action.
Film production risk_assessment_ig2_
The document provides a template for conducting a risk assessment for a film production. It involves identifying hazards, who or what may be harmed, existing controls, assigning a risk level, and additional actions. Hazards identified for the film shoot include wooden platforms throughout the forest posing a high risk, tripping hazards with the risk depending on controls, and water posing a moderate risk. Weather conditions like rain, ice, wind and lightning also present risks that depend on existing controls. Other risks include disruption from dogs or people, and injury from climbing trees to get shots.
Film Production Risk Assessment
The document provides a template for conducting a risk assessment for a film production. It involves identifying hazards, who or what may be harmed, existing controls, assigning a risk level, and further actions needed. Hazards identified for an outdoor shoot include slippery wooden platforms and tripping hazards, water and weather conditions like rain and ice increasing slip hazards, the possibility of lightning, wind interfering with filming, disruptions from dogs or people, and injury from climbing trees for shots. Risk levels range from low to extreme, with further actions including improving controls like non-slip footwear, rescheduling shoots based on weather, and using a dolly rig instead of climbing if needed.
Similar to (Annexure-62.7) SLIP TRIP FALL CAMPAIGN (1).pptx (20)
Recently uploaded
REGULATION FOR COMBINATION PRODUCTS AND MEDICAL DEVICES.pptx
It includes regulation of combination products and medical devices. FDA and industry liaisons.
Hemodialysis: Chapter 5, Dialyzers Overview - Dr.Gawad
- Video recording of this lecture in English language: https://youtu.be/Pt1nA32sdHQ
- Video recording of this lecture in Arabic language: https://youtu.be/uFdc9F0rlP0
- Link to download the book free: https://nephrotube.blogspot.com/p/nephrotube-nephrology-books.html
- Link to NephroTube website: www.NephroTube.com
- Link to NephroTube social media accounts: https://nephrotube.blogspot.com/p/join-nephrotube-on-social-media.html
Ketone bodies and metabolism-biochemistry
This slide consists of all the topics of ketone . This can be used for exam purpose for writing about Diabetic keto acidosis etc . Thank you
Osteoporosis - Definition , Evaluation and Management .pdf
Osteoporosis is an increasing cause of morbidity among the elderly.
In this document , a brief outline of osteoporosis is given , including the risk factors of osteoporosis fractures , the indications for testing bone mineral density and the management of osteoporosis
8 Surprising Reasons To Meditate 40 Minutes A Day That Can Change Your Life.pptx
8 Surprising Reasons To Meditate 40 Minutes A Day That Can Change Your Life.pptxHolistified Wellness
We’re talking about Vedic Meditation, a form of meditation that has been around for at least 5,000 years. Back then, the people who lived in the Indus Valley, now known as India and Pakistan, practised meditation as a fundamental part of daily life. This knowledge that has given us yoga and Ayurveda, was known as Veda, hence the name Vedic. And though there are some written records, the practice has been passed down verbally from generation to generation.Journal Article Review on Rasamanikya
Rasamanikya is a excellent preparation in the field of Rasashastra, it is used in various Kushtha Roga, Shwasa, Vicharchika, Bhagandara, Vatarakta, and Phiranga Roga. In this article Preparation& Comparative analytical profile for both Formulationon i.e Rasamanikya prepared by Kushmanda swarasa & Churnodhaka Shodita Haratala. The study aims to provide insights into the comparative efficacy and analytical aspects of these formulations for enhanced therapeutic outcomes.
Artificial Intelligence Symposium (THAIS)
Artificial Intelligence Symposium (THAIS). Parc Taulí. Sabadell
Top Travel Vaccinations in Manchester
Travel vaccination in Manchester offers comprehensive immunization services for individuals planning international trips. Expert healthcare providers administer vaccines tailored to your destination, ensuring you stay protected against various diseases. Conveniently located clinics and flexible appointment options make it easy to get the necessary shots before your journey. Stay healthy and travel with confidence by getting vaccinated in Manchester. Visit us: www.nxhealthcare.co.uk
Histopathology of Rheumatoid Arthritis: Visual treat
Histopathology of Rheumatoid Arthritis: Visual treat
Integrating Ayurveda into Parkinson’s Management: A Holistic Approach
Explore the benefits of combining Ayurveda with conventional Parkinson's treatments. Learn how a holistic approach can manage symptoms, enhance well-being, and balance body energies. Discover the steps to safely integrate Ayurvedic practices into your Parkinson’s care plan, including expert guidance on diet, herbal remedies, and lifestyle modifications.
Does Over-Masturbation Contribute to Chronic Prostatitis.pptx
In some case, your chronic prostatitis may be related to over-masturbation. Generally, natural medicine Diuretic and Anti-inflammatory Pill can help mee get a cure.
Adhd Medication Shortage Uk - trinexpharmacy.com
The UK is currently facing a Adhd Medication Shortage Uk, which has left many patients and their families grappling with uncertainty and frustration. ADHD, or Attention Deficit Hyperactivity Disorder, is a chronic condition that requires consistent medication to manage effectively. This shortage has highlighted the critical role these medications play in the daily lives of those affected by ADHD. Contact : +1 (747) 209 – 3649 E-mail : sales@trinexpharmacy.com
Post-Menstrual Smell- When to Suspect Vaginitis.pptx
Do you have abnormal smell after periods? It may be vaginitis. Do not worry, herbal medicine Fuyan Pill can help you get a cure.
Recently uploaded (20)
REGULATION FOR COMBINATION PRODUCTS AND MEDICAL DEVICES.pptx
REGULATION FOR COMBINATION PRODUCTS AND MEDICAL DEVICES.pptx
CHEMOTHERAPY_RDP_CHAPTER 6_Anti Malarial Drugs.pdf
CHEMOTHERAPY_RDP_CHAPTER 6_Anti Malarial Drugs.pdf
Hemodialysis: Chapter 5, Dialyzers Overview - Dr.Gawad
Hemodialysis: Chapter 5, Dialyzers Overview - Dr.Gawad
Osteoporosis - Definition , Evaluation and Management .pdf
Osteoporosis - Definition , Evaluation and Management .pdf
8 Surprising Reasons To Meditate 40 Minutes A Day That Can Change Your Life.pptx
8 Surprising Reasons To Meditate 40 Minutes A Day That Can Change Your Life.pptx
Histopathology of Rheumatoid Arthritis: Visual treat
Histopathology of Rheumatoid Arthritis: Visual treat
Integrating Ayurveda into Parkinson’s Management: A Holistic Approach
Integrating Ayurveda into Parkinson’s Management: A Holistic Approach
Does Over-Masturbation Contribute to Chronic Prostatitis.pptx
Does Over-Masturbation Contribute to Chronic Prostatitis.pptx
Post-Menstrual Smell- When to Suspect Vaginitis.pptx
Post-Menstrual Smell- When to Suspect Vaginitis.pptx
(Annexure-62.7) SLIP TRIP FALL CAMPAIGN (1).pptx
- 1. Incident BasedCampaign SLIP ,TRIP & FALL CAMPAIGN 2021 Pellet Plant, BGP. 13TH June 2021 to 26th July 2021 ” रुको , विचार करो , तब फिर काम करो। “
- 2. PURPOSE & BENEFITS OF CONDUCTING SLIP/TRIP/FALL CAMPAIGN • Our campaign focuses on the effects that an injury can have on your personal life outside of work, as well as emphasising that better hazard perception and awareness of your surroundings can prevent a slip, trip or fall. • We aim to promote safe and proactive behaviours, to prevent accidents before they have the opportunity to arise. It’s important we all take time to pause and think before we act.
- 3. Sl. Agenda Discussion Action to be Taken Responsibility Target 1. AWARENESS REGARDING THE CAMPAIGN Awareness regarding Slip, Trip & Fall was given by Safety officer Mr. Shahid raza. Awareness to be improved regularly Safety Supervisor Continuous 2. IDENTIFICATION OF SLIP, TRIP & FALL SITUATIONS Slip, trip & fall situations at site was identified by the supervisors Mr. Nagender Singh Slip, trip & fall conditions identified & closure to be done. Supervisor 30 days 3. CLOUSE OF SLIP TRIP & FALL SITUATIONS Slip, trip & fall situations at site was identified by the supervisors & closure done as per requirements. More improvements to be made Supervisor Continuous 4. SLIP TRIP FALL QUIZ Mr. Suhagi was awarded for excellent performance during slip, trip & fall quiz competition. More awards rewards to be given for campaigns Supervisor Continuous 6. ANY OTHER RELVENT POINTS TO BE DISCUSSED No other relevant points to be discussed Agenda Discussion
- 4. Safety Pause ACCIDENT DETAILS REPORT OF OTHERS On 7th June 2021the injured person was descending from the 9m floor next to the ld#2 ramp from the stairs leading to the desulfurization area. He put his foot on the ground floor after he got down from all steps of the ladder. His heel twisted while keeping his right foot on the ground. On feeling pain on his right leg, He went to west plant first aid center. LEARNING FROM INCIDENT:- Due to the landing point Accident take placed that’s Why we have taken learning from the accident that all the landing areas to be identified & closed. Implementation by M/S. New Vishal Engineering & Co: We had identified a landing point which is in unsafe condition at Pellet Plant, area which could have caused accident/incident.
- 5. SLIP loss of balance caused by too little friction between a person’s foot and a walking surface. Common Causes: – Wet or oily surfaces, – Occasional spills, – Weather hazards, – Loose, unanchored rugs or mats, and – Flooring or other walking surfaces that are worn.
- 6. TRIP A trip occurs when a person’s foot contacts an object in their way or drops to a lower level unexpectedly, causing them to be thrown off- balance. Common Causes: – Obstructed view – Poor lighting – Clutter in your way – Wrinkled carpeting – Uncovered cables – Drawers not being closed – Uneven (steps, thresholds) walking surfaces
- 7. FALL A fall occurs when you are too far off balance. Common Causes: • Falls on the same level – Slip or trip immediately precedes fall to floor or walkway • Falls to lower level – Falls are from platforms, docks, ladders, steps or stairs • Jumps to lower level – An intentional jump from one level to another – Employee jumps off ladder, dock, equipment
- 8. Schedule for slip , trip & fall Campaign Activity Responsibility Remark’s Banner Display in at site Supervisor Done Small Session on S,T,F Safety supervisor Done Quiz Safety supervisor Done Find it ,own it ,Fix it supervisor Continue Slogan and Painting Safety supervisor Done Line walk Proprietor Done Feedback session supervisor Done Award Distribution supervisor Done
- 9. SLOGAN AND PAINTING Slogan and painting competition done in BGP Total 08 employee participate
- 10. SLOGAN AND PAINTING 1. Rajkumar Mishra 2. Bishnu Panda Winner of Slogan And Painting Competition
- 11. DISCUSSED ABOUT FIND IT OWN IT FIX IT IN SLIP TRIP FALL CAMPAIGN Find It , Own It , Fix It
- 12. Improvement Cable found on Surface . Slip ,Trip and Fall Chance is available .No Identification mark . Take preventive Action and cover the uneven surface . Find It , Own It , Fix It
- 13. Find It , Own It , Fix It . We had identified & Correct a landing point which is in unsafe condition at Pellet Plant, area which could have caused accident/incident. Improvement
- 14. IMPROVEMENTS AFTER CONDUCTING SLIP/TRIP/FALL CAMPAIGN • There are various factors that contribute to the risk of slips/Trip/Fall usually occur when there is a loss of grip between the shoe and the floor are noticed and removed/repair on immediate basis. • little slip at work can have a big impact on our life. ... Workers are now able to maintain their balance when performing tasks and be able to recover if they slip/Trip/Fall
- 15. M/S. New Vishal Engineering & Co. OUTCOME OF CAMPAIGN New Initiative has been taken. Safety pause was communicated with all the employee. Employee were motivated by speech given by Mr.Nishan Singh.(MD) Direct Interaction between operational employees and our Md.
- 16. PINALY POWER Pay Attention Be Proactive Be Careful आज सुरक्षा अपनाओगे, तो कल सुरक्षक्षत भविष्य पाओगे।