By Paing Htet Aung
 In 1943, The World first airboat was invented
by Cecil Williams Leo Young, and G.Hortin
Jensen in Utah near Brigham City. The
purpose of this invention of the airboat is to
protect wild life of bird refuge. So, there is
no seat for air boat driver. This air boat was
used 40 horsepower continental aircraft
engine. Another name of the Air Boat is
Swamp Boat.

 The shape of the airboat is flat-bottomed
vessel. The airboat engine must use an
aircraft-type or automotive engine with
aircraft-type propeller. The airboat can drive
on shallow swamps, in canals, lakes, and
river, as well as frozen lakes. The design of
the airboats also makes it that can drive in
ice rescue operation. Airboat is one kind of
transportation vehicle. The airboats are
usually used for ecotourism, fishing, and
hunting.

 flat-bottomed vessel shape
 Aircraft-type or automotive engine
 Aircraft type propeller
 Can drive shallow swamps, in canal, lakes,
frozen lakes and river
 Use for transportation, ecotourism, fishing,
and hunting
 Aim for the USV ( unmanned surface
vehicles).
 Air boat cannot drive backward
 To can drive backward, it change the car
type ESC.
1.Air boat frame
2.Propeller
3.3 cell LIPO battery (3200mah)
4.Brushless motor (2200KV)
5.4 channel transmitter and Receiver
6.ESC (electronic speed controller) 40 Ampere
7. Servo motor
 4 Channel RC Remote and Receiver
This remote frequency have 2.4 Ghz
transmitter. It is aim for the Hobby and student
project. It is also called TX. This transmitter is
transmitting to the receiver RX. The Receiver
RX receiving the signals from the transmitter
TX. This remote power supply is four AA
Batteries. This radio control remote can
control 4 outputs because of it have 4
channels.
Lithium polymer battery and
lithium-ion polymer battery are
abbreviated as LIP, LiPo, Li-poly
and others. This battery is one
kind of rechargeable battery. It
is using the lithium-ion
technology using polymer
electrolyte in it’s of a liquid. In
tablet computers, smart phone,
cellular telephone, and radio-
controlled aircraft or multi-
copter.
 The servo is used for the rudder of the
airboat. It includes small dc motor, angle
sensor, gear for turning, circuit control
sensor, power supply and signal wire.
The brushless motors are suitable for radio
control air boat, the high power and
efficiency. There are two kinds of brushless
motor. There are as following Inrunner and
outrunner.
Airboat Design for manufactuing

Airboat Design for manufactuing

  • 1.
  • 2.
     In 1943,The World first airboat was invented by Cecil Williams Leo Young, and G.Hortin Jensen in Utah near Brigham City. The purpose of this invention of the airboat is to protect wild life of bird refuge. So, there is no seat for air boat driver. This air boat was used 40 horsepower continental aircraft engine. Another name of the Air Boat is Swamp Boat. 
  • 3.
     The shapeof the airboat is flat-bottomed vessel. The airboat engine must use an aircraft-type or automotive engine with aircraft-type propeller. The airboat can drive on shallow swamps, in canals, lakes, and river, as well as frozen lakes. The design of the airboats also makes it that can drive in ice rescue operation. Airboat is one kind of transportation vehicle. The airboats are usually used for ecotourism, fishing, and hunting. 
  • 6.
     flat-bottomed vesselshape  Aircraft-type or automotive engine  Aircraft type propeller  Can drive shallow swamps, in canal, lakes, frozen lakes and river  Use for transportation, ecotourism, fishing, and hunting
  • 7.
     Aim forthe USV ( unmanned surface vehicles).  Air boat cannot drive backward  To can drive backward, it change the car type ESC.
  • 8.
    1.Air boat frame 2.Propeller 3.3cell LIPO battery (3200mah) 4.Brushless motor (2200KV) 5.4 channel transmitter and Receiver 6.ESC (electronic speed controller) 40 Ampere 7. Servo motor
  • 11.
     4 ChannelRC Remote and Receiver This remote frequency have 2.4 Ghz transmitter. It is aim for the Hobby and student project. It is also called TX. This transmitter is transmitting to the receiver RX. The Receiver RX receiving the signals from the transmitter TX. This remote power supply is four AA Batteries. This radio control remote can control 4 outputs because of it have 4 channels.
  • 13.
    Lithium polymer batteryand lithium-ion polymer battery are abbreviated as LIP, LiPo, Li-poly and others. This battery is one kind of rechargeable battery. It is using the lithium-ion technology using polymer electrolyte in it’s of a liquid. In tablet computers, smart phone, cellular telephone, and radio- controlled aircraft or multi- copter.
  • 15.
     The servois used for the rudder of the airboat. It includes small dc motor, angle sensor, gear for turning, circuit control sensor, power supply and signal wire.
  • 18.
    The brushless motorsare suitable for radio control air boat, the high power and efficiency. There are two kinds of brushless motor. There are as following Inrunner and outrunner.