The document provides details of the applicant's work experience as an instrumentation and control engineer working for various companies in Syria, Turkey, and the United Arab Emirates from 2007-2014. It lists his primary tasks in these roles which included predictive maintenance, calibration of instruments, electrical work, PLC and HMI programming. It also outlines his education qualifications and skills in areas like industrial automation, electronics, and computer programming.

1. 2011-2014 2 years and 6 months Lafarge Cement Syria-Menbej
My Job title was Instrumentation Engineer for all the plant from crushers to
packing.
My Primary Tasks are :
-Predictive Maintenance in shut down and emergency maintenace for all
instruments in the plant and in Electrical power station which provide the plant
with 11 KV.
- Make calibration for: belt scales - material weigh feeders -Packer machine spouts
and belts - dust monitor - pressure transmitters- temprature transmitters -
Gamma Ray for detecting level - Gas Analyser.
-Backup all sensors parameters with Heart or By hand.
-Backup all local Plcs and HMI by Laptop.
- last 9 months i worked as Electrical Engineer in addition to Instrumentation
engineer and worked on Motor Drives and Semicode and Siprotec and all power
equipments from Siemens.
- working on Engineering station on plc Sematic Manger for S7-300 and S7-400 PLC
and special scada from FLS.
- I am Responsiple on Fire Alarm System (Maintenece and check list.
- Working on Dcs System wich exists in Power Station.
Work
Experience
2014 25/10/2014 GMS PANO Istanbul Beylikdüzü
GMS PANO is big company in making electric panels , my position is project
Manager and my tasks are :
-Electrical Diagrams drawing with Eplan P8 2.3 , Autocad 2015 .
-study the cost of projects .
-Test panels and make isolation test for it .
-After sales service .
Personal
Information
Nationality: Syrian. Age: 30
Marital status: Married / 1 kid Military Service: Exemption
Temporary Address: Istanbul , Büyükçekmece TC : 99394860468
Mobile: 00905347315569 E-MAIL: Ahmaddhhan@gmail.com
Eng.Ahmad Dhhan
Control And Automation Engineer
2014 1/2/2014 10/6/2014 Smart mak Istanbul,Büyükçekmece
I worked at Smart mak company which manufacture Packing Machines ,bakery and
Production lines.
My Primary Tasks - Study the control and how machine works and draw Diagrams
and make control panel for the machines ( Plc - Hmi - Weighing unit - sensors -
motors ). - Supervise the assembly and operation of the machine and follow-up
after-sales maintenance and provide the necessary support for customers.

2. [2006-2011]: Graduated from Faculty of Electrical & Electronic Engineering
Aleppo University (2/11/2011) , as an Electronic Engineer, with overall
graduation evaluation: Good (68.9%).
Education
Courses &
Activities
2011 1 year Sabbagh Engineering Syria / Aleppo
I worked at Sabbagh engineering company which manufacture Packing Machines
and Production lines. www.iy-sabbagh.com
My Primary Tasks :
- Study the control and how machine works and draw Diagrams and make control
panel for the machines ( Plc - Hmi - Wieghing unit - sensors - motors ).
- Supervise the assembly and operation of the machine and follow-up after-sales
maintenance and provide the necessary support for costomers.
2010-2011 1 Year Syropaper Syria-Aleppo
I have spent one year working for Syro Paper which consider Fifth largest plant in
Syria.
During this year I worked in construction, installing and commissioning all parts of
the plant with Andritz company experts.
My Primary Tasks:
-Install All local panels with good team of technician, and check function for all
motors which driven by inverters or soft starter.
-Check function of all instruments and test it.
-After construction and commissioning finished,my job was maintenance for the
machines.
[2003-2004] : I got Training course In Accad Institute for Power
and Electronics the course inlude : [Basic of electricity-Sensors - Ac motors - Dc
motors- Ac Drives-Drawing Circuits on orcad-Programming moller plc- Sienmens
plc].
2011: Training course from Ventomatic in the Plant (lafarge)
http://www.flsmidth.com/en-US/FLSmidth+Ventomatic.
2011-2013 : I got Many training courses in safety [ Lototo - Work at Hight - Risk
assigsment - confined space -Safety Drive-Permit to work - First aid ----]
Work
Experience
2007-2010 3 Years Syriamica Syria - Aleppo
I have spent three years working for Syriamica which consider the beggest
industry in making Formica.
My Primary Tasks:
-Make maintenace and calibration for all instrumnets (Temperature- weight-
motors-all sensors-inverters-control panels)
-Make maintenace for Air compressors and Boiler.
-Predictive Maintencance for all electrical parts on machines (Inverters- motors -
Sensors-----etc)
-Install new projects in the plant and develop it.

3. Linkedin
https://www.linkedin.com/in/ahmad-dhhan-24434b74
Work Permit
http://www.calismaizni.gov.tr/duyurular/gkk
*Design and implementation of electronic circuits controlled by the computer or micro
* Design and implementation of several projects in the field of industrial control.
*design and implementation of the graduation project robot arm to automate the process
technology.
* programming Atmel AVR micro controllers language Bascom AVR .
*professional electronic circuit design using orcad.
analysis and simulation of electronic circuits using programs Proteus, Pspice ..
*PLC programmable logic controllers using different programming languages and
kinds.
*programming HMI touch screens and now working on SCADA systems.
*knowledge of many types of inverters AC and Dc .
* Servo Drives and motors.
*simulation and design systems using Matlab, Simulink.
*work on the Microsoft Office programs well.
*I have valid driver's license B
Personal
Abilities
Languages
Other Skills
Projects