Sherif Wahba Fayek is seeking a position as an electrical and automation engineer with over 15 years of experience. He has worked in commissioning and maintenance roles for steel mills in Egypt and the UAE, involving the installation and programming of PLCs, drives, sensors and other electrical equipment. He has strong skills in hardware and software troubleshooting, maintenance, and implementing safety procedures.

1. Sherif Wahba Fayek
Al Nahyan Camp, Mouroor Street
Abu Dhabi, UAE Tel: +971501250714
+971558227845
Email: sherif.fayek@esi-steel.com
CAREER
OBJECTIVE
Seeking for a suitable position as electric and automation engineer to provide
my expertise and technical skills developed over fifteen years of working in this
field.
Job Position: -Electrical and Automation Engineer.
WORK
EXPERIENCE
Sep 2001 up till July
2007 Full Time
-Working as electric and automation Engineer in BESHAY STEEL (Egyptian American
Steel Rolling Mills), SIMAC (Member of SMS), the contracted Italian company, designed
and supplied the mill , Capacity 1.2 Million ton / year ,, two lines rebar and one for wire
rode .
-Starting my work in the commissioning period of the factory under supervision of the
Italian engineers and still working in steady state condition to reach the full load capacity.
-Working during this period in the field of hardware equipments and software programs.
Hardware equipment:
#involved in the installing and commission of ABB 33/11 KV.
#involved in the installing and commission of ABB Static Var Compensator (SVC).
#Many types of digital and analog sensors such as proximitys, flow switchs, pressure
switch, photocells, hot metal detector…ext.
#Many types of analog sensors such as flow and pressure transducers, thermocouples,
pyrometers, loop scanners….ext.
#DEMAG overhead cranes.
#D.C motors and its maintenance regarding to brushes, commutator and lubrication.
#A.C motors and its maintenance regarding to greasing.
#Drives of D.C motors (ABB DCS 500) and A.C motors (ABB ACS 600) with strong
dealing with its parameters, control circuit, software programming (CMT) and
communication with PLC.
#Step down transformers 220/11 KV, 11KV/550 V, 11KV/380V with its protections.
Page 1 of 2

2. 12-July 2007 up to now
#Protection panels of transformers which contain circuit brakers, protection relays and
control circuits.
#11 KV power factor and harmonic filters to absorb the third, fifth harmonics.
# # Making tests for medium voltage protection relays (as PR 512) using secondary
injection device.
#Have a strong troubleshooting skills in the hardware and software problems.
#Have a strong maintenance skills in the hardware and software equipments.
Software equipment:
#PLC (Siemens) hardware modules as CPU, communication processor, D/I and A/I
modules, interface modules, repeaters.
#PLC software program (SIMATIC MANAGER step 7), with making a lot of modifications
to improve, stabilize and make full safety to the equipments and operation, these
modifications is made by PLC step 7 ladder diagram and statement list.
-Full installation and commissioning of Siemens Micro-master Drive to control cooling
conveyer with making intercommunication between the drive, PLC and Scada system.
-Full installation and commissioning of many soft-starters to control roller table motors with
making intercommunication between the drive, PLC and Scada system.
#the communication between drives and PLC via profibus modules and fiber optics cables.
#Data transfer from PLC to HMI and vis versa and also making a lot of modifications in
the HMI masks using the Factory Link program.
# Follow up operation parameters at HMI.
# Follow up the sequence using data logger.
-Working as electric and automation supervisor in EMARATE STEEL INDUSTRIES
at UAE responsible of the electrical and automation tasks in rebar and wire rod rolling
mills,
-I was involved in the commissioning of both plants under supervision of the
contracted Italian company “Danilli” which designed and supplied the mills.
-I was involved in commissioning of:
#ABB synchronous motor and ABB ACS 6000.
#SIEMENS MASTER and MICRMASTER DRIVES (hardware and software).
# SIMATIC MANAGER step 7 PLC (hardware and software).
# The PLC and drives networks like profibus and MPI and the interconnection
between it.
# The field devices either digital or analog.
# Cold and hot commissioning.
Page 2 of 2

3. # Preparing the snag lists in the commissioning procedures and highlighting it.
# Preparing the extra modifications which required from Danilli to improve the
process.
After the mill was handed over completely to our company, I took the following
responsibilities:
-I am responsible of taking the periodic backups of PLC projects, HMI masks, drives
parameters and OWS setup pages.
-Making many software modifications using PLC step 7 and HMI win CC and
communicate each other like:
# Making C-Hook HMI project designed by win-CC program which includes 8 pages
describing all the area process, operation and control.
-Making self-improving in step 7 STL (indirect addressing) and SCL for data
managing system and tracking.
-Supervise the preventive and predictive maintenance jobs related to PLC, Drives,
Motors and filed devices.
-Troubleshooting many different types of problem in electrical, automation and
process fields.
- Following up and analyzing the process sequences using graphical programs like FDA.
- Implementing full safety procedures for all types of tasks in PM or CM jobs.
- Appling and filing work standers and procedures which is related to electrical activities.
-Analyzing the data transfer between level 2 and PLC from PLC side.
EDUCATION
2000
Qualification: B. SC of Electric Machine and Power Engineering, Ain Shams University,
Cairo, Egypt.
Accumulated Grade = Fair
Date of Graduation : 15/7/2000
& Project (harmonic filters and power factor correction)
Grade = V. good.
MISC.INFORMA
TION
Computer Skills: Excellent
Office, CCNA certified
Languages: Arabic:- As a mother tongue English:- V. Good ( Written & spoken)
Page 3 of 2

4. PERSONAL DATA
Date of Birth: 22/1/1977 ||| Gender: Male ||| Nationality: Egypt
Military Status: final exempted ||| Marital Status: Married
Thank you for your confidential reading
Page 4 of 2