Advanced/Notes 7.3
•Download as PPTX, PDF•
0 likes•202 views
This document discusses collisions and impulse. It explains that large forces occur during collisions over very short periods of time. Impulse can be measured as the change in momentum, and can be produced by either a large force acting over a short time or a small force over a longer time. The document provides an example of calculating the impulse with and without an airbag during a car collision.
Report
Share
Report
Share
Recommended
Lesson 5 types of machines
This document discusses different types of machines. It describes simple machines like the inclined plane, lever, pulley, wedge, and screw. The inclined plane lifts objects by sliding or rolling. The lever applies a larger force using a smaller force. Pulleys change the direction of forces and can lift weights. Wedges cut or separate things while screws fasten things together. Compound machines are made up of simple machines working together, like cranes which use engines and pulleys to lift heavy loads, or cars which contain engines and gearboxes.
Levers and pulleys g3
This document discusses simple machines including levers, wheels and axles, and pulleys. It explains that these machines make work easier by changing either the direction or amount of force required. Levers are described as having a fulcrum, load, and force. There are three types of levers depending on the arrangement of these components. Wheels and axles use a wheel rotating around a post or axle to change the strength of a turning force. Pulleys use a wheel and rope to lift loads, requiring less force by pulling down to lift up. The objectives are to understand how levers and pulleys are machines that make work easier.
Simple Machines!
This document discusses simple machines and provides examples of six basic types: lever, inclined plane, wheel and axle, screw, wedge, and pulley. Simple machines make work easier by transferring energy from the user to the object being moved or lifted, and they have few or no moving parts. Complex machines are combinations of simple machines that allow for more complex tasks. Examples of simple machines used in everyday life at home are also provided.
Notes 9.1
This document discusses momentum, impulse, and angular momentum. It begins by defining momentum and impulse, and how to calculate impulse from force and time. It then discusses how momentum and impulse are vectors and how their directions are important. Examples are given of calculating momentum and impulse in situations like hitting a baseball or stopping a moving vehicle. The document also introduces angular momentum and how torque is required to change angular velocity. Homework problems are assigned at the end to further understanding of these concepts.
Lever,wheel&axle,pulley
The document discusses three simple machines: levers, wheel and axle, and pulleys. It describes how each machine works and how it provides mechanical advantage. Levers change the direction or amount of force. The wheel and axle increases force or distance depending on where the input is applied. Pulleys can decrease the needed input force and change the direction of force to lift an object.
Simplemachines1
Simple machines make difficult physical tasks easier by changing either the amount of force required or the direction of force. Examples of simple machines include the inclined plane, screw, wedge, lever, wheel and axle, and pulley. Each simple machine allows a smaller force to be exerted over a greater distance to produce the same amount of work as a larger force over a smaller distance. Simple machines have been used for thousands of years to perform tasks from lifting heavy weights to powering boats.
Simple and compound__machines
Simple machines make work easier by changing the amount of force needed or the distance through which force is applied. The six simple machines are the lever, wheel and axle, pulley, inclined plane, wedge, and screw. Compound machines combine two or more simple machines to make work even easier by providing a greater mechanical advantage.
Types of Bike Trainers
There are several types of indoor bike trainers available for cyclists, including wind trainers which are inexpensive but noisy, magnetic trainers which are quieter and offer adjustable resistance, fluid trainers that are very quiet and increase resistance with speed, and rollers that simulate outdoor riding but require balance. The document provides an overview of different bike trainer options and encourages purchasing from Bicycle HQ.
Recommended
Lesson 5 types of machines
This document discusses different types of machines. It describes simple machines like the inclined plane, lever, pulley, wedge, and screw. The inclined plane lifts objects by sliding or rolling. The lever applies a larger force using a smaller force. Pulleys change the direction of forces and can lift weights. Wedges cut or separate things while screws fasten things together. Compound machines are made up of simple machines working together, like cranes which use engines and pulleys to lift heavy loads, or cars which contain engines and gearboxes.
Levers and pulleys g3
This document discusses simple machines including levers, wheels and axles, and pulleys. It explains that these machines make work easier by changing either the direction or amount of force required. Levers are described as having a fulcrum, load, and force. There are three types of levers depending on the arrangement of these components. Wheels and axles use a wheel rotating around a post or axle to change the strength of a turning force. Pulleys use a wheel and rope to lift loads, requiring less force by pulling down to lift up. The objectives are to understand how levers and pulleys are machines that make work easier.
Simple Machines!
This document discusses simple machines and provides examples of six basic types: lever, inclined plane, wheel and axle, screw, wedge, and pulley. Simple machines make work easier by transferring energy from the user to the object being moved or lifted, and they have few or no moving parts. Complex machines are combinations of simple machines that allow for more complex tasks. Examples of simple machines used in everyday life at home are also provided.
Notes 9.1
This document discusses momentum, impulse, and angular momentum. It begins by defining momentum and impulse, and how to calculate impulse from force and time. It then discusses how momentum and impulse are vectors and how their directions are important. Examples are given of calculating momentum and impulse in situations like hitting a baseball or stopping a moving vehicle. The document also introduces angular momentum and how torque is required to change angular velocity. Homework problems are assigned at the end to further understanding of these concepts.
Lever,wheel&axle,pulley
The document discusses three simple machines: levers, wheel and axle, and pulleys. It describes how each machine works and how it provides mechanical advantage. Levers change the direction or amount of force. The wheel and axle increases force or distance depending on where the input is applied. Pulleys can decrease the needed input force and change the direction of force to lift an object.
Simplemachines1
Simple machines make difficult physical tasks easier by changing either the amount of force required or the direction of force. Examples of simple machines include the inclined plane, screw, wedge, lever, wheel and axle, and pulley. Each simple machine allows a smaller force to be exerted over a greater distance to produce the same amount of work as a larger force over a smaller distance. Simple machines have been used for thousands of years to perform tasks from lifting heavy weights to powering boats.
Simple and compound__machines
Simple machines make work easier by changing the amount of force needed or the distance through which force is applied. The six simple machines are the lever, wheel and axle, pulley, inclined plane, wedge, and screw. Compound machines combine two or more simple machines to make work even easier by providing a greater mechanical advantage.
Types of Bike Trainers
There are several types of indoor bike trainers available for cyclists, including wind trainers which are inexpensive but noisy, magnetic trainers which are quieter and offer adjustable resistance, fluid trainers that are very quiet and increase resistance with speed, and rollers that simulate outdoor riding but require balance. The document provides an overview of different bike trainer options and encourages purchasing from Bicycle HQ.
Linear Momentum
Momentum is defined as mass times velocity. It is a vector quantity measured in kg*m/s. Impulse is the change in momentum caused by a force over time. Impulse is equal to force times time. In collisions, momentum is always conserved while kinetic energy may or may not be conserved depending on whether the collision is elastic or inelastic. Explosions also conserve momentum as the total momentum of the system before must equal the total momentum after.
Amusement Park Physics All in One.ppt
1) Amusement park rides are based on two scientific principles - gravity and inertia. Gravity rides like rollercoasters and splash rides use gravity to accelerate riders down hills and drops. Inertia rides like bumper cars and spinning rides use inertia to induce feelings of changes in motion or speed.
2) Rides demonstrate these principles through their design elements. For example, rollercoasters use hills to convert potential to kinetic energy, while bumper cars use electrical energy and collisions to change each other's motion.
3) The principles create exciting experiences for riders through sensations like rapid acceleration, weightlessness, and sudden changes in speed or direction.
Levers
The document discusses the three classes of levers and their characteristics. A first class lever has the fulcrum between the effort force and load. Examples include scissors and a can opener. A second class lever has the load between the effort and fulcrum. Examples are wheelbarrows and nut crackers. A third class lever has the effort between the fulcrum and load. It multiplies speed over force.
Website impulse momentum
Momentum relates to many concepts we have learned in physics:
- It is a measure of an object's motion, combining its mass and velocity.
- Newton's second law tells us that force causes a change in momentum over time. A larger force creates a greater change in momentum.
- In collisions and explosions, momentum is conserved. The total momentum before the interaction equals the total momentum after.
- Impulse is the change in momentum an object experiences due to an applied force over time. It equals the average force times the time interval.
- Increasing or decreasing momentum involves changing an object's velocity over time through the application of forces. Extending the time of an impact reduces the average force.
Lmfr kinetics
This document discusses kinetics of blunt trauma, specifically related to vehicle crashes. It begins by defining concepts like inertia, conservation of energy, and kinetic versus potential energy. It then explains kinetics, force, and the differences between blunt and other types of injuries. The majority of the document discusses types of vehicle crashes, including details on frontal, lateral, rotational, rear-end, and rollover impacts. It explains how modern safety features like seatbelts, airbags, and crumple zones help reduce injury by absorbing and redirecting kinetic energy. The document concludes by emphasizing that serious injuries can still occur even in low-speed crashes and from secondary collisions within the vehicle.
Chapter18
This document provides instructions for building an impulse generator that extracts useful energy from gravity. It summarizes William Skinner's gravity-powered device from 1939 that uses falling weights in a circular motion without the weights reaching the ground. It then describes the design of an impulse generator being built, which uses one large flywheel driven by one or two smaller flywheels through intermittent contact to gain energy from acceleration and inertia. Detailed steps are provided for constructing the flywheels and support structure from steel, including cutting, welding, and fastening bearings to allow rotation.
IMPULSE AND MOMENTUM2.pptx
The document discusses impulse and momentum. It explains that changing an object's motion requires a net force acting over time, known as impulse. Impulse is equal to the change in an object's momentum. The document uses examples like throwing an egg to explain how increasing impact time through cushioning decreases impact force by spreading out the impulse over a longer period. It also provides Newton's second law relating force, mass and acceleration, and gives sample momentum and impulse problems.
Biomechanics 3 2014
This document discusses angular motion and key terminology used in biomechanics. It defines angular motion as when a body moves in a circle around an axis of rotation. It then defines several important terms including centre of gravity, moment of force, angular distance, angular displacement, angular speed, angular velocity, and angular acceleration. It explains Newton's three laws of motion as applied to angular motion. Finally, it discusses the law of conservation of angular momentum and how a figure skater can speed up or slow down spins by changing their moment of inertia without changing their total angular momentum.
Forces and Motion Moments.pptx
The document discusses moments and turning forces. It defines a moment as the turning effect of a force and explains that moments are used to describe how forces cause the rotation of objects. It states that the size of a moment affects how much rotation is produced, with larger moments creating more rotation. The document emphasizes that when calculating moments, the force always acts perpendicular to the measured distance. It also introduces the concept of center of gravity and how an object not pivoted at its center of gravity will experience a turning effect from its weight.
Momentum tmid
Momentum is a measure of how difficult it is to stop a moving object. It is defined by the equation momentum (p) equals mass (m) times velocity (v). In a closed system where no external forces act, the total momentum before an event like a collision will equal the total momentum after the event, according to the principle of conservation of momentum.
Jeopardy review for mfe exam
some of the links from the first page are messed up. I recommend you just go through it in order
I also meant cm squared on the pressure units, slide 23
Advanced/Notes 7.1
This document provides an overview of the key concepts in the chapter on linear momentum including:
- Defining linear momentum as the product of an object's mass and velocity.
- Explaining how momentum is related to force through Newton's second law.
- Describing how the total momentum of an isolated system remains constant through the law of conservation of momentum.
Simple machines power point (2)
The document discusses the six simple machines: lever, inclined plane, wedge, screw, wheel and axle, and pulley. It defines each machine, explains how they provide mechanical advantage by changing the amount of force, distance, or direction of force required to do work. The efficiency and actual vs ideal mechanical advantage of machines is also covered.
Applied physics presentation
Sir Isaac Newton discovered gravity after observing apples falling from a tree. He formulated the Law of Gravity, which states that all objects with mass are attracted to each other with a force proportional to their masses and inversely proportional to the distance between them. Newton went on to develop his Three Laws of Motion through studying how objects interact, laying the foundations for the field of physics. The document then discusses concepts related to forces like G-force and its effects on the human body, as well as simple machines and catapults.
Vibration analysis unit 3
Unit 3 which is a part of a continuing series on education in vibration analysis of live engineering systems operating in both linear and non-linear out of equilibrium zones.
Force-Unit 2 (Class 9 science)
This teaching Material is for Grade - 9 Science. Here we are trying to cover Force from Unit 2. We provide teaching material at no cost. Please don't forget to recommend/reference our teaching Material after use.
Understanding How Flight simulation works
Simple Flight Simulation Knowledge and skills. This material will give some depth to the flight simulation world
Acceleration
This document discusses acceleration and its relationship to displacement, velocity, and time. It defines acceleration as the rate at which an object's velocity changes. Displacement is a change in position, velocity is the rate of change of displacement, and acceleration is the rate of change of velocity. The human body can detect acceleration through changes in speed or direction but not constant velocity. Formulas are provided relating acceleration, change in velocity, and change in time. Free fall acceleration on Earth is 9.81 m/s^2 due to gravity.
Geometry/Notes 11.2
This document provides information on finding the areas of triangles, trapezoids, and rhombi. It gives the formulas for calculating the area of each shape, includes examples of applying the formulas, and provides practice problems for students to work through. The lesson plan is for a two-day unit covering adding the areas of different plane figures, with the first day focused on notes and examples, and the second day devoted to review and assessment.
Geometry/Notes 11.1
This document discusses finding the areas of parallelograms and using coordinate planes to identify parallelograms. It provides examples of calculating perimeters and areas of parallelograms. It also gives applications involving finding the area of yard spaces and floors. Students are asked to plot points on a coordinate plane to identify parallelograms and calculate their areas. The lesson plan is to introduce finding areas of parallelograms over two class periods with notes, examples, and a follow-up quiz.
Geometry/Notes 10.8
This document provides information about writing and graphing equations of circles. It defines a circle as the set of all points equidistant from a given point, called the center. The equation of a circle relates the radius and center point using the form (x - h)2 + (y - k)2 = r2, where (h, k) represents the center and r is the radius. Examples are given of writing equations for circles with specified centers and radii. The lesson plan outlines introducing the key concepts, guided practice examples, and a worksheet for independent practice in writing and graphing circle equations.
General/Notes 11.2
The document discusses the law of conservation of energy and how to use it to solve problems. It explains that energy cannot be created or destroyed, but can change forms, and the total amount of energy in a closed system stays the same. It focuses on mechanical energy, which is the sum of potential and kinetic energy. Several examples are provided of calculating changes in potential and kinetic energy as an object moves, such as a ball being dropped or a person skiing down a slope. Friction is also discussed as it relates to accounting for energy loss.
More Related Content
Similar to Advanced/Notes 7.3
Linear Momentum
Momentum is defined as mass times velocity. It is a vector quantity measured in kg*m/s. Impulse is the change in momentum caused by a force over time. Impulse is equal to force times time. In collisions, momentum is always conserved while kinetic energy may or may not be conserved depending on whether the collision is elastic or inelastic. Explosions also conserve momentum as the total momentum of the system before must equal the total momentum after.
Amusement Park Physics All in One.ppt
1) Amusement park rides are based on two scientific principles - gravity and inertia. Gravity rides like rollercoasters and splash rides use gravity to accelerate riders down hills and drops. Inertia rides like bumper cars and spinning rides use inertia to induce feelings of changes in motion or speed.
2) Rides demonstrate these principles through their design elements. For example, rollercoasters use hills to convert potential to kinetic energy, while bumper cars use electrical energy and collisions to change each other's motion.
3) The principles create exciting experiences for riders through sensations like rapid acceleration, weightlessness, and sudden changes in speed or direction.
Levers
The document discusses the three classes of levers and their characteristics. A first class lever has the fulcrum between the effort force and load. Examples include scissors and a can opener. A second class lever has the load between the effort and fulcrum. Examples are wheelbarrows and nut crackers. A third class lever has the effort between the fulcrum and load. It multiplies speed over force.
Website impulse momentum
Momentum relates to many concepts we have learned in physics:
- It is a measure of an object's motion, combining its mass and velocity.
- Newton's second law tells us that force causes a change in momentum over time. A larger force creates a greater change in momentum.
- In collisions and explosions, momentum is conserved. The total momentum before the interaction equals the total momentum after.
- Impulse is the change in momentum an object experiences due to an applied force over time. It equals the average force times the time interval.
- Increasing or decreasing momentum involves changing an object's velocity over time through the application of forces. Extending the time of an impact reduces the average force.
Lmfr kinetics
This document discusses kinetics of blunt trauma, specifically related to vehicle crashes. It begins by defining concepts like inertia, conservation of energy, and kinetic versus potential energy. It then explains kinetics, force, and the differences between blunt and other types of injuries. The majority of the document discusses types of vehicle crashes, including details on frontal, lateral, rotational, rear-end, and rollover impacts. It explains how modern safety features like seatbelts, airbags, and crumple zones help reduce injury by absorbing and redirecting kinetic energy. The document concludes by emphasizing that serious injuries can still occur even in low-speed crashes and from secondary collisions within the vehicle.
Chapter18
This document provides instructions for building an impulse generator that extracts useful energy from gravity. It summarizes William Skinner's gravity-powered device from 1939 that uses falling weights in a circular motion without the weights reaching the ground. It then describes the design of an impulse generator being built, which uses one large flywheel driven by one or two smaller flywheels through intermittent contact to gain energy from acceleration and inertia. Detailed steps are provided for constructing the flywheels and support structure from steel, including cutting, welding, and fastening bearings to allow rotation.
IMPULSE AND MOMENTUM2.pptx
The document discusses impulse and momentum. It explains that changing an object's motion requires a net force acting over time, known as impulse. Impulse is equal to the change in an object's momentum. The document uses examples like throwing an egg to explain how increasing impact time through cushioning decreases impact force by spreading out the impulse over a longer period. It also provides Newton's second law relating force, mass and acceleration, and gives sample momentum and impulse problems.
Biomechanics 3 2014
This document discusses angular motion and key terminology used in biomechanics. It defines angular motion as when a body moves in a circle around an axis of rotation. It then defines several important terms including centre of gravity, moment of force, angular distance, angular displacement, angular speed, angular velocity, and angular acceleration. It explains Newton's three laws of motion as applied to angular motion. Finally, it discusses the law of conservation of angular momentum and how a figure skater can speed up or slow down spins by changing their moment of inertia without changing their total angular momentum.
Forces and Motion Moments.pptx
The document discusses moments and turning forces. It defines a moment as the turning effect of a force and explains that moments are used to describe how forces cause the rotation of objects. It states that the size of a moment affects how much rotation is produced, with larger moments creating more rotation. The document emphasizes that when calculating moments, the force always acts perpendicular to the measured distance. It also introduces the concept of center of gravity and how an object not pivoted at its center of gravity will experience a turning effect from its weight.
Momentum tmid
Momentum is a measure of how difficult it is to stop a moving object. It is defined by the equation momentum (p) equals mass (m) times velocity (v). In a closed system where no external forces act, the total momentum before an event like a collision will equal the total momentum after the event, according to the principle of conservation of momentum.
Jeopardy review for mfe exam
some of the links from the first page are messed up. I recommend you just go through it in order
I also meant cm squared on the pressure units, slide 23
Advanced/Notes 7.1
This document provides an overview of the key concepts in the chapter on linear momentum including:
- Defining linear momentum as the product of an object's mass and velocity.
- Explaining how momentum is related to force through Newton's second law.
- Describing how the total momentum of an isolated system remains constant through the law of conservation of momentum.
Simple machines power point (2)
The document discusses the six simple machines: lever, inclined plane, wedge, screw, wheel and axle, and pulley. It defines each machine, explains how they provide mechanical advantage by changing the amount of force, distance, or direction of force required to do work. The efficiency and actual vs ideal mechanical advantage of machines is also covered.
Applied physics presentation
Sir Isaac Newton discovered gravity after observing apples falling from a tree. He formulated the Law of Gravity, which states that all objects with mass are attracted to each other with a force proportional to their masses and inversely proportional to the distance between them. Newton went on to develop his Three Laws of Motion through studying how objects interact, laying the foundations for the field of physics. The document then discusses concepts related to forces like G-force and its effects on the human body, as well as simple machines and catapults.
Vibration analysis unit 3
Unit 3 which is a part of a continuing series on education in vibration analysis of live engineering systems operating in both linear and non-linear out of equilibrium zones.
Force-Unit 2 (Class 9 science)
This teaching Material is for Grade - 9 Science. Here we are trying to cover Force from Unit 2. We provide teaching material at no cost. Please don't forget to recommend/reference our teaching Material after use.
Understanding How Flight simulation works
Simple Flight Simulation Knowledge and skills. This material will give some depth to the flight simulation world
Acceleration
This document discusses acceleration and its relationship to displacement, velocity, and time. It defines acceleration as the rate at which an object's velocity changes. Displacement is a change in position, velocity is the rate of change of displacement, and acceleration is the rate of change of velocity. The human body can detect acceleration through changes in speed or direction but not constant velocity. Formulas are provided relating acceleration, change in velocity, and change in time. Free fall acceleration on Earth is 9.81 m/s^2 due to gravity.
Similar to Advanced/Notes 7.3 (18)
More from mrshowellclass
Geometry/Notes 11.2
This document provides information on finding the areas of triangles, trapezoids, and rhombi. It gives the formulas for calculating the area of each shape, includes examples of applying the formulas, and provides practice problems for students to work through. The lesson plan is for a two-day unit covering adding the areas of different plane figures, with the first day focused on notes and examples, and the second day devoted to review and assessment.
Geometry/Notes 11.1
This document discusses finding the areas of parallelograms and using coordinate planes to identify parallelograms. It provides examples of calculating perimeters and areas of parallelograms. It also gives applications involving finding the area of yard spaces and floors. Students are asked to plot points on a coordinate plane to identify parallelograms and calculate their areas. The lesson plan is to introduce finding areas of parallelograms over two class periods with notes, examples, and a follow-up quiz.
Geometry/Notes 10.8
This document provides information about writing and graphing equations of circles. It defines a circle as the set of all points equidistant from a given point, called the center. The equation of a circle relates the radius and center point using the form (x - h)2 + (y - k)2 = r2, where (h, k) represents the center and r is the radius. Examples are given of writing equations for circles with specified centers and radii. The lesson plan outlines introducing the key concepts, guided practice examples, and a worksheet for independent practice in writing and graphing circle equations.
General/Notes 11.2
The document discusses the law of conservation of energy and how to use it to solve problems. It explains that energy cannot be created or destroyed, but can change forms, and the total amount of energy in a closed system stays the same. It focuses on mechanical energy, which is the sum of potential and kinetic energy. Several examples are provided of calculating changes in potential and kinetic energy as an object moves, such as a ball being dropped or a person skiing down a slope. Friction is also discussed as it relates to accounting for energy loss.
Advanced/Notes 9.2
To solve static problems:
1. Make a free-body diagram showing all forces on each object.
2. Choose a coordinate system and resolve forces into components.
3. Write equilibrium equations for the sum of forces in each direction and the sum of torques.
4. Solve the equations to determine the unknown forces.
Advanced/Notes 9.1
The document discusses static equilibrium, which refers to when an object experiences forces but does not move or accelerate. It provides examples of a book sitting on a table and braces on teeth being in equilibrium, as the forces balance out. It also discusses calculating tensions in cords supporting a chandelier and the concept of levers providing mechanical advantage to allow smaller applied forces to move larger objects.
Geometry/Notes 10.6
This document discusses secants, tangents, and angle measures related to circles. It defines a secant as a line that intersects a circle at two points and presents three theorems relating the measures of angles formed by secants and tangents to the measures of the arcs they intercept. Examples demonstrate using the theorems to find measures of angles and arcs. The lesson plan is to take two days, with the first day covering notes and the second reviewing related material and giving a quiz.
Geometry/Notes 10.5
This document discusses tangents to circles and includes several theorems about tangents: a tangent intersects a circle at only one point and is perpendicular to the radius at that point; if a line is perpendicular to a radius it is tangent to the circle; and if two segments from the same exterior point are tangent to a circle they are congruent. Examples applying these theorems to find measures are provided. The document also defines a circumscribed polygon as one where every side is tangent to the enclosed circle. Homework problems from the textbook are assigned.
Geometry/Notes 10.4
This document discusses inscribed angles and theorems related to them. An inscribed angle is an angle whose vertex is on a circle and whose sides are chords of the circle. The intercepted arc is the arc created by the chords of the inscribed angle. Three theorems are presented: if two inscribed angles intercept congruent arcs, the angles are congruent; if an inscribed angle intercepts a semicircle, the angle is a right angle; and if a quadrilateral is inscribed in a circle, its opposite angles are supplementary. The lesson plan is to introduce inscribed angles and develop theorems about them over two class periods with notes, examples, and a quiz.
General/Notes 11.1
The document discusses the relationship between work and energy. It states that work causes a change in the energy of a system, transferring energy between the system and the external world. Energy can exist in different forms and be changed from one form to another. Examples are given of kinetic energy and gravitational potential energy, including the equation PE = mgh. Worksheets and practice problems are provided about calculating gravitational potential energy at different heights and the work done by gravity in lifting objects.
Geometry/Notes 10.3
This document covers geometry concepts related to arcs, chords, and theorems in circles. It discusses the relationship between arcs and chords, and theorem 10.3 which states that if a diameter or radius is perpendicular to a chord, it bisects the chord and its arc. The document provides examples and homework problems, and outlines a lesson plan to introduce rules about the relationship between chords and arcs over two class periods, including notes, examples, and a review quiz.
Goemetry/Notes 10.2
This document discusses angles and arcs in circles. It defines central angles as angles with the center of the circle as the vertex and radii as the sides. The measurement of an arc is equal to the measurement of its central angle. Arcs are classified as minor, semi-circle, or major depending on whether their central angle measures less than, equal to, or greater than 180 degrees, respectively. The document also provides examples of calculating arc measures and lengths using proportions relating the degree measure of the central angle to the arc length and circumference. There are homework problems assigned from the textbook.
Advanced/Notes 8.8
This document discusses angular momentum and its conservation. It provides an example of a mass attached to a string revolving in a circle on a table. Initially, the mass revolves at a radius r1 with a speed of v1 = 2.4 m/s. The string is pulled through a hole, reducing the radius to r2 = 0.48 m. The document asks the reader to calculate the new speed v2 based on the conservation of angular momentum. It also provides homework problems from page 222 problems 51-56 and 57-62 related to angular momentum and its conservation.
Advanced/Notes 8.7
This document discusses rotational kinetic energy and how to calculate it. It notes that both rotational and translational kinetic energy must be considered when using the law of conservation of energy. It provides an example of objects with the same potential energy at the top of an incline, but different times to reach the bottom based on their rotational inertia. Finally, it lists homework problems from page 221, numbers 43 through 48.
Physics/Notes 10.2
This document discusses simple machines including their definitions, examples, and calculations of mechanical advantage and efficiency. It defines a machine as a device that changes the magnitude or direction of a force. Simple machines include levers, pulleys, inclined planes, screws, and wedges. Complex machines combine two or more simple machines. Ideal mechanical advantage is the ratio of output force to input force. Real machines have efficiencies less than 100% due to friction and other losses. Compound machines link two or more simple machines together such as the combination of a pedal, gear, chain, and wheel that makes up part of a bicycle.
Geometry/Notes 10.1
This document provides information about circles and circumference. It defines a circle as all points equidistant from a center point and lists the parts of a circle as the center, radius, diameter, chord, and circumference. It gives examples of naming circle parts and using the circumference formula C=2πr to solve problems finding circumference given radius or diameter or to find radius or diameter given circumference. Students are assigned homework problems from their textbook on these concepts.
Advanced/Notes 8.5
This document discusses rotational dynamics and torque. It defines moment of inertia as relating to how mass is distributed about an axis of rotation. Greater moment of inertia means more mass is farther from the axis. Examples calculate moment of inertia for different axes of rotation for a system with two masses on a rod. Solving rotational dynamics problems involves drawing diagrams, identifying the system and forces, finding the axis of rotation, applying Newton's laws for rotation and translation, and checking units and magnitudes. The associated homework assignments problems 27-32 and 33-37, 42 are also listed.
Advanced/Notes 8.4
Torque is calculated based on the lever arm, which is the perpendicular distance from the axis of rotation to the point where a force is applied. A longer lever arm results in a greater torque. An example calculates the torque on a bicep muscle attached 5 cm from the elbow joint, based on different forces applied. A second example calculates the net torque on two connected wheels from two 50N forces, based on the wheels' radii serving as lever arms. The document concludes by assigning homework problems related to torque calculations.
Advnaced/Notes 8.2
This document discusses rotational motion and angular kinematics. It provides examples of calculating angular acceleration, revolutions, and angular velocity. Key equations for rotational motion are the same as linear motion but with angular quantities substituted. Examples include finding the angular acceleration and revolutions of a centrifuge rotor accelerating from rest to 20,000 rpm, and calculating values like angular velocity and revolutions for a slowing bicycle wheel. Readers are assigned homework problems applying these concepts.
Geometry/Notes 8.6
The document defines a trapezoid as a quadrilateral with one pair of parallel sides. It identifies the key terms used to describe trapezoids, including bases, legs, base angles, and medians. It provides an example problem involving verifying that a shape is a trapezoid and finding the endpoints of its median. Homework problems from the textbook are assigned.
More from mrshowellclass (20)
Recently uploaded
Observability Concepts EVERY Developer Should Know -- DeveloperWeek Europe.pdf
Monitoring and observability aren’t traditionally found in software curriculums and many of us cobble this knowledge together from whatever vendor or ecosystem we were first introduced to and whatever is a part of your current company’s observability stack.
While the dev and ops silo continues to crumble….many organizations still relegate monitoring & observability as the purview of ops, infra and SRE teams. This is a mistake - achieving a highly observable system requires collaboration up and down the stack.
I, a former op, would like to extend an invitation to all application developers to join the observability party will share these foundational concepts to build on:
Pushing the limits of ePRTC: 100ns holdover for 100 days
At WSTS 2024, Alon Stern explored the topic of parametric holdover and explained how recent research findings can be implemented in real-world PNT networks to achieve 100 nanoseconds of accuracy for up to 100 days.
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Discover how MongoDB Atlas and vector search technology can revolutionize your application's search capabilities. This comprehensive presentation covers:
* What is Vector Search?
* Importance and benefits of vector search
* Practical use cases across various industries
* Step-by-step implementation guide
* Live demos with code snippets
* Enhancing LLM capabilities with vector search
* Best practices and optimization strategies
Perfect for developers, AI enthusiasts, and tech leaders. Learn how to leverage MongoDB Atlas to deliver highly relevant, context-aware search results, transforming your data retrieval process. Stay ahead in tech innovation and maximize the potential of your applications.
#MongoDB #VectorSearch #AI #SemanticSearch #TechInnovation #DataScience #LLM #MachineLearning #SearchTechnology
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Discover the seamless integration of RPA (Robotic Process Automation), COMPOSER, and APM with AWS IDP enhanced with Slack notifications. Explore how these technologies converge to streamline workflows, optimize performance, and ensure secure access, all while leveraging the power of AWS IDP and real-time communication via Slack notifications.
Uni Systems Copilot event_05062024_C.Vlachos.pdf
Unlocking Productivity: Leveraging the Potential of Copilot in Microsoft 365, a presentation by Christoforos Vlachos, Senior Solutions Manager – Modern Workplace, Uni Systems
Introducing Milvus Lite: Easy-to-Install, Easy-to-Use vector database for you...
Join us to introduce Milvus Lite, a vector database that can run on notebooks and laptops, share the same API with Milvus, and integrate with every popular GenAI framework. This webinar is perfect for developers seeking easy-to-use, well-integrated vector databases for their GenAI apps.
Communications Mining Series - Zero to Hero - Session 1
This session provides introduction to UiPath Communication Mining, importance and platform overview. You will acquire a good understand of the phases in Communication Mining as we go over the platform with you. Topics covered:
• Communication Mining Overview
• Why is it important?
• How can it help today’s business and the benefits
• Phases in Communication Mining
• Demo on Platform overview
• Q/A
Generative AI Deep Dive: Advancing from Proof of Concept to Production
Join Maher Hanafi, VP of Engineering at Betterworks, in this new session where he'll share a practical framework to transform Gen AI prototypes into impactful products! He'll delve into the complexities of data collection and management, model selection and optimization, and ensuring security, scalability, and responsible use.
Removing Uninteresting Bytes in Software Fuzzing
Imagine a world where software fuzzing, the process of mutating bytes in test seeds to uncover hidden and erroneous program behaviors, becomes faster and more effective. A lot depends on the initial seeds, which can significantly dictate the trajectory of a fuzzing campaign, particularly in terms of how long it takes to uncover interesting behaviour in your code. We introduce DIAR, a technique designed to speedup fuzzing campaigns by pinpointing and eliminating those uninteresting bytes in the seeds. Picture this: instead of wasting valuable resources on meaningless mutations in large, bloated seeds, DIAR removes the unnecessary bytes, streamlining the entire process.
In this work, we equipped AFL, a popular fuzzer, with DIAR and examined two critical Linux libraries -- Libxml's xmllint, a tool for parsing xml documents, and Binutil's readelf, an essential debugging and security analysis command-line tool used to display detailed information about ELF (Executable and Linkable Format). Our preliminary results show that AFL+DIAR does not only discover new paths more quickly but also achieves higher coverage overall. This work thus showcases how starting with lean and optimized seeds can lead to faster, more comprehensive fuzzing campaigns -- and DIAR helps you find such seeds.
- These are slides of the talk given at IEEE International Conference on Software Testing Verification and Validation Workshop, ICSTW 2022.
GraphSummit Singapore | Enhancing Changi Airport Group's Passenger Experience...
Dr. Sean Tan, Head of Data Science, Changi Airport Group
Discover how Changi Airport Group (CAG) leverages graph technologies and generative AI to revolutionize their search capabilities. This session delves into the unique search needs of CAG’s diverse passengers and customers, showcasing how graph data structures enhance the accuracy and relevance of AI-generated search results, mitigating the risk of “hallucinations” and improving the overall customer journey.
20240609 QFM020 Irresponsible AI Reading List May 2024
Everything I found interesting about the irresponsible use of machine intelligence in May 2024
Full-RAG: A modern architecture for hyper-personalization
Mike Del Balso, CEO & Co-Founder at Tecton, presents "Full RAG," a novel approach to AI recommendation systems, aiming to push beyond the limitations of traditional models through a deep integration of contextual insights and real-time data, leveraging the Retrieval-Augmented Generation architecture. This talk will outline Full RAG's potential to significantly enhance personalization, address engineering challenges such as data management and model training, and introduce data enrichment with reranking as a key solution. Attendees will gain crucial insights into the importance of hyperpersonalization in AI, the capabilities of Full RAG for advanced personalization, and strategies for managing complex data integrations for deploying cutting-edge AI solutions.
Presentation of the OECD Artificial Intelligence Review of Germany
Consult the full report at https://www.oecd.org/digital/oecd-artificial-intelligence-review-of-germany-609808d6-en.htm
UiPath Test Automation using UiPath Test Suite series, part 5
Welcome to UiPath Test Automation using UiPath Test Suite series part 5. In this session, we will cover CI/CD with devops.
Topics covered:
CI/CD with in UiPath
End-to-end overview of CI/CD pipeline with Azure devops
Speaker:
Lyndsey Byblow, Test Suite Sales Engineer @ UiPath, Inc.
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...Edge AI and Vision Alliance
For the full video of this presentation, please visit: https://www.edge-ai-vision.com/2024/06/building-and-scaling-ai-applications-with-the-nx-ai-manager-a-presentation-from-network-optix/
Robin van Emden, Senior Director of Data Science at Network Optix, presents the “Building and Scaling AI Applications with the Nx AI Manager,” tutorial at the May 2024 Embedded Vision Summit.
In this presentation, van Emden covers the basics of scaling edge AI solutions using the Nx tool kit. He emphasizes the process of developing AI models and deploying them globally. He also showcases the conversion of AI models and the creation of effective edge AI pipelines, with a focus on pre-processing, model conversion, selecting the appropriate inference engine for the target hardware and post-processing.
van Emden shows how Nx can simplify the developer’s life and facilitate a rapid transition from concept to production-ready applications.He provides valuable insights into developing scalable and efficient edge AI solutions, with a strong focus on practical implementation.TrustArc Webinar - 2024 Global Privacy Survey
How does your privacy program stack up against your peers? What challenges are privacy teams tackling and prioritizing in 2024?
In the fifth annual Global Privacy Benchmarks Survey, we asked over 1,800 global privacy professionals and business executives to share their perspectives on the current state of privacy inside and outside of their organizations. This year’s report focused on emerging areas of importance for privacy and compliance professionals, including considerations and implications of Artificial Intelligence (AI) technologies, building brand trust, and different approaches for achieving higher privacy competence scores.
See how organizational priorities and strategic approaches to data security and privacy are evolving around the globe.
This webinar will review:
- The top 10 privacy insights from the fifth annual Global Privacy Benchmarks Survey
- The top challenges for privacy leaders, practitioners, and organizations in 2024
- Key themes to consider in developing and maintaining your privacy program
Mind map of terminologies used in context of Generative AI
Mind map of common terms used in context of Generative AI.
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...
The choice of an operating system plays a pivotal role in shaping our computing experience. For decades, Microsoft's Windows has dominated the market, offering a familiar and widely adopted platform for personal and professional use. However, as technological advancements continue to push the boundaries of innovation, alternative operating systems have emerged, challenging the status quo and offering users a fresh perspective on computing.
One such alternative that has garnered significant attention and acclaim is Nitrux Linux 3.5.0, a sleek, powerful, and user-friendly Linux distribution that promises to redefine the way we interact with our devices. With its focus on performance, security, and customization, Nitrux Linux presents a compelling case for those seeking to break free from the constraints of proprietary software and embrace the freedom and flexibility of open-source computing.
GraphSummit Singapore | The Future of Agility: Supercharging Digital Transfor...
Leonard Jayamohan, Partner & Generative AI Lead, Deloitte
This keynote will reveal how Deloitte leverages Neo4j’s graph power for groundbreaking digital twin solutions, achieving a staggering 100x performance boost. Discover the essential role knowledge graphs play in successful generative AI implementations. Plus, get an exclusive look at an innovative Neo4j + Generative AI solution Deloitte is developing in-house.
Recently uploaded (20)
Observability Concepts EVERY Developer Should Know -- DeveloperWeek Europe.pdf
Observability Concepts EVERY Developer Should Know -- DeveloperWeek Europe.pdf
Pushing the limits of ePRTC: 100ns holdover for 100 days
Pushing the limits of ePRTC: 100ns holdover for 100 days
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Introducing Milvus Lite: Easy-to-Install, Easy-to-Use vector database for you...
Introducing Milvus Lite: Easy-to-Install, Easy-to-Use vector database for you...
Communications Mining Series - Zero to Hero - Session 1
Communications Mining Series - Zero to Hero - Session 1
Generative AI Deep Dive: Advancing from Proof of Concept to Production
Generative AI Deep Dive: Advancing from Proof of Concept to Production
GraphSummit Singapore | Enhancing Changi Airport Group's Passenger Experience...
GraphSummit Singapore | Enhancing Changi Airport Group's Passenger Experience...
20240609 QFM020 Irresponsible AI Reading List May 2024
20240609 QFM020 Irresponsible AI Reading List May 2024
Full-RAG: A modern architecture for hyper-personalization
Full-RAG: A modern architecture for hyper-personalization
Presentation of the OECD Artificial Intelligence Review of Germany
Presentation of the OECD Artificial Intelligence Review of Germany
UiPath Test Automation using UiPath Test Suite series, part 5
UiPath Test Automation using UiPath Test Suite series, part 5
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...
Mind map of terminologies used in context of Generative AI
Mind map of terminologies used in context of Generative AI
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...
GraphSummit Singapore | The Future of Agility: Supercharging Digital Transfor...
GraphSummit Singapore | The Future of Agility: Supercharging Digital Transfor...
Advanced/Notes 7.3
- 2. • How do measure an impulse? Collisions and Impulse
- 3. • Large forces occur during collisions • These forces deform objects • Deformation occurs because huge jumps in forces happen over a short amount of time Collisions
- 4. • Time of collisions is very short • We need not worry about the exact time dependence of the force • We can use average force Collisions
- 5. • Impulse
- 6. • Can have the same change in momentum • A large force acting for a short time • A small force acting for a longer time • Bend your knees when you land Impulse
- 7. • If I drop an egg… • http://www.youtube.c om/watch?v=C08JBiq 2eJ4 Why does it matter?
- 8. • Driving along, suddenly a brick wall appears in front of you and you crash. Your mass is 60 kg and you were driving 25 m/s. With no airbag, your body comes to rest in 3 x 10-4 s. An airbag can extend the time to rest by a factor of 100. Calculate the two impulses. Why airbags?
- 9. • Read Section 7.3 • Do Problems # 15 – 19, Page 188 • Bonus # 21 • Egg Drop Challenge Homework