The document provides specifications for the DigiFlex® PerformanceTM Servo Drive DPRNLIE-030A800. It can drive brushed and brushless servomotors in torque, velocity, or position mode using space vector modulation. It features 30A peak current, 10.6A continuous current, 200-480VAC input voltage, RS-232/485 communication interface, and 10 programmable digital inputs and 4 outputs. It is CE and RoHS compliant.
Encryption in Microsoft 365 - ExpertsLive Netherlands 2024Albert Hoitingh
In this session I delve into the encryption technology used in Microsoft 365 and Microsoft Purview. Including the concepts of Customer Key and Double Key Encryption.
Key Trends Shaping the Future of Infrastructure.pdfCheryl Hung
Keynote at DIGIT West Expo, Glasgow on 29 May 2024.
Cheryl Hung, ochery.com
Sr Director, Infrastructure Ecosystem, Arm.
The key trends across hardware, cloud and open-source; exploring how these areas are likely to mature and develop over the short and long-term, and then considering how organisations can position themselves to adapt and thrive.
Kubernetes & AI - Beauty and the Beast !?! @KCD Istanbul 2024Tobias Schneck
As AI technology is pushing into IT I was wondering myself, as an “infrastructure container kubernetes guy”, how get this fancy AI technology get managed from an infrastructure operational view? Is it possible to apply our lovely cloud native principals as well? What benefit’s both technologies could bring to each other?
Let me take this questions and provide you a short journey through existing deployment models and use cases for AI software. On practical examples, we discuss what cloud/on-premise strategy we may need for applying it to our own infrastructure to get it to work from an enterprise perspective. I want to give an overview about infrastructure requirements and technologies, what could be beneficial or limiting your AI use cases in an enterprise environment. An interactive Demo will give you some insides, what approaches I got already working for real.
Connector Corner: Automate dynamic content and events by pushing a buttonDianaGray10
Here is something new! In our next Connector Corner webinar, we will demonstrate how you can use a single workflow to:
Create a campaign using Mailchimp with merge tags/fields
Send an interactive Slack channel message (using buttons)
Have the message received by managers and peers along with a test email for review
But there’s more:
In a second workflow supporting the same use case, you’ll see:
Your campaign sent to target colleagues for approval
If the “Approve” button is clicked, a Jira/Zendesk ticket is created for the marketing design team
But—if the “Reject” button is pushed, colleagues will be alerted via Slack message
Join us to learn more about this new, human-in-the-loop capability, brought to you by Integration Service connectors.
And...
Speakers:
Akshay Agnihotri, Product Manager
Charlie Greenberg, Host
Transcript: Selling digital books in 2024: Insights from industry leaders - T...BookNet Canada
The publishing industry has been selling digital audiobooks and ebooks for over a decade and has found its groove. What’s changed? What has stayed the same? Where do we go from here? Join a group of leading sales peers from across the industry for a conversation about the lessons learned since the popularization of digital books, best practices, digital book supply chain management, and more.
Link to video recording: https://bnctechforum.ca/sessions/selling-digital-books-in-2024-insights-from-industry-leaders/
Presented by BookNet Canada on May 28, 2024, with support from the Department of Canadian Heritage.
Software Delivery At the Speed of AI: Inflectra Invests In AI-Powered QualityInflectra
In this insightful webinar, Inflectra explores how artificial intelligence (AI) is transforming software development and testing. Discover how AI-powered tools are revolutionizing every stage of the software development lifecycle (SDLC), from design and prototyping to testing, deployment, and monitoring.
Learn about:
• The Future of Testing: How AI is shifting testing towards verification, analysis, and higher-level skills, while reducing repetitive tasks.
• Test Automation: How AI-powered test case generation, optimization, and self-healing tests are making testing more efficient and effective.
• Visual Testing: Explore the emerging capabilities of AI in visual testing and how it's set to revolutionize UI verification.
• Inflectra's AI Solutions: See demonstrations of Inflectra's cutting-edge AI tools like the ChatGPT plugin and Azure Open AI platform, designed to streamline your testing process.
Whether you're a developer, tester, or QA professional, this webinar will give you valuable insights into how AI is shaping the future of software delivery.
JMeter webinar - integration with InfluxDB and GrafanaRTTS
Watch this recorded webinar about real-time monitoring of application performance. See how to integrate Apache JMeter, the open-source leader in performance testing, with InfluxDB, the open-source time-series database, and Grafana, the open-source analytics and visualization application.
In this webinar, we will review the benefits of leveraging InfluxDB and Grafana when executing load tests and demonstrate how these tools are used to visualize performance metrics.
Length: 30 minutes
Session Overview
-------------------------------------------
During this webinar, we will cover the following topics while demonstrating the integrations of JMeter, InfluxDB and Grafana:
- What out-of-the-box solutions are available for real-time monitoring JMeter tests?
- What are the benefits of integrating InfluxDB and Grafana into the load testing stack?
- Which features are provided by Grafana?
- Demonstration of InfluxDB and Grafana using a practice web application
To view the webinar recording, go to:
https://www.rttsweb.com/jmeter-integration-webinar
Securing your Kubernetes cluster_ a step-by-step guide to success !KatiaHIMEUR1
Today, after several years of existence, an extremely active community and an ultra-dynamic ecosystem, Kubernetes has established itself as the de facto standard in container orchestration. Thanks to a wide range of managed services, it has never been so easy to set up a ready-to-use Kubernetes cluster.
However, this ease of use means that the subject of security in Kubernetes is often left for later, or even neglected. This exposes companies to significant risks.
In this talk, I'll show you step-by-step how to secure your Kubernetes cluster for greater peace of mind and reliability.
GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using Deplo...James Anderson
Effective Application Security in Software Delivery lifecycle using Deployment Firewall and DBOM
The modern software delivery process (or the CI/CD process) includes many tools, distributed teams, open-source code, and cloud platforms. Constant focus on speed to release software to market, along with the traditional slow and manual security checks has caused gaps in continuous security as an important piece in the software supply chain. Today organizations feel more susceptible to external and internal cyber threats due to the vast attack surface in their applications supply chain and the lack of end-to-end governance and risk management.
The software team must secure its software delivery process to avoid vulnerability and security breaches. This needs to be achieved with existing tool chains and without extensive rework of the delivery processes. This talk will present strategies and techniques for providing visibility into the true risk of the existing vulnerabilities, preventing the introduction of security issues in the software, resolving vulnerabilities in production environments quickly, and capturing the deployment bill of materials (DBOM).
Speakers:
Bob Boule
Robert Boule is a technology enthusiast with PASSION for technology and making things work along with a knack for helping others understand how things work. He comes with around 20 years of solution engineering experience in application security, software continuous delivery, and SaaS platforms. He is known for his dynamic presentations in CI/CD and application security integrated in software delivery lifecycle.
Gopinath Rebala
Gopinath Rebala is the CTO of OpsMx, where he has overall responsibility for the machine learning and data processing architectures for Secure Software Delivery. Gopi also has a strong connection with our customers, leading design and architecture for strategic implementations. Gopi is a frequent speaker and well-known leader in continuous delivery and integrating security into software delivery.
Slack (or Teams) Automation for Bonterra Impact Management (fka Social Soluti...Jeffrey Haguewood
Sidekick Solutions uses Bonterra Impact Management (fka Social Solutions Apricot) and automation solutions to integrate data for business workflows.
We believe integration and automation are essential to user experience and the promise of efficient work through technology. Automation is the critical ingredient to realizing that full vision. We develop integration products and services for Bonterra Case Management software to support the deployment of automations for a variety of use cases.
This video focuses on the notifications, alerts, and approval requests using Slack for Bonterra Impact Management. The solutions covered in this webinar can also be deployed for Microsoft Teams.
Interested in deploying notification automations for Bonterra Impact Management? Contact us at sales@sidekicksolutionsllc.com to discuss next steps.
Assuring Contact Center Experiences for Your Customers With ThousandEyes
Advanced motion controls dprnlie 030a800
1. DigiFlex® Performance™ Servo Drive DPRNLIE-030A800
Description
Power Range
The DigiFlex® Performance™ (DP) Series digital servo drives are designed to drive brushed and brushless servomotors. These fully digital drives operate in torque, velocity, or position mode and employ Space Vector Modulation (SVM), which results in higher bus voltage utilization and reduced heat dissipation compared to traditional PWM. The drive can be configured for a variety of external command signals. Commands can also be configured using the drive’s built-in Motion Engine, an internal motion controller used with distributed motion applications. In addition to motor control, these drives feature dedicated and programmable digital and analog inputs and outputs to enhance interfacing with external controllers and devices.
This DP Series drive features a single RS-232/RS-485 interface used for drive configuration and setup. Drive commissioning is accomplished using DriveWare® 7, available for download at www.a-m-c.com.
All drive and motor parameters are stored in non- volatile memory.
Peak Current 30 A (21.2 ARMS)
Continuous Current 15 A (10.6 ARMS)
Supply Voltage 200 - 480 VAC
Features
Four Quadrant Regenerative Operation
Space Vector Modulation (SVM) Technology
Fully Digital State-of-the-art Design
Programmable Gain Settings
Fully Configurable Current, Voltage, Velocity and Position Limits
PIDF Velocity Loop
PID + FF Position Loop
Compact Size, High Power Density
16-bit Analog to Digital Hardware
Built-in brake/shunt regulator
Internal brake/shunt resistor
On-the-Fly Mode Switching
On-the-Fly Gain Set Switching
MODES OF OPERATION
Current
Position
Velocity
Hall Velocity
COMMAND SOURCE
PWM and Direction
Encoder Following
Over the Network
5V Step and Direction
Sequencing
Indexing
Jogging
FEEDBACK SUPPORTED
Halls
Incremental Encoder
±10 VDC Position
Auxiliary Incremental Encoder
Tachometer (±10 VDC)
INPUTS/OUTPUTS
3 Programmable Analog Inputs (12-bit Resolution)
5 Programmable Digital Inputs (Differential)
5 Programmable Digital Inputs (Single-Ended)
4 Programmable Digital Outputs (Single-Ended)
COMPLIANCES & AGENCY APPROVALS
CE Class A (LVD)
CE Class A (EMC)
RoHS
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
Sold & Serviced By:
2. DigiFlex® Performance™ Servo Drive DPRNLIE-030A800
BLOCK DIAGRAM
SELECTTX/TX– I/O InterfaceI/O Interface DriveLogicRS232/485InterfaceCONTROL MODULERX/RX– TX+ RX+ ISO GNDPAI-3 + PA-3 – PDI-1,2,3,5,7INPUT COMMONPDI-4,6,8,9,10 + (PWM+ / STEP+ / DIR+ / AUX ENC A,B,I + / CAP-A,B,C+) PDO-1,2,3,4OUTPUT COMMON5k+5V10k+5V10k2.5k20k20k20kPAI-1,2SGN GNDPAI-1: 33kPAI-2: 500k3.75KPDI-4,6,8,9,10 – (PWM– / STEP– / DIR– / AUX ENC A,B,I – / CAP-A,B,C–) OUTPUT PULL-UP Motor FeedbackMotor Feedback MOT ENC A,B,I + MOT ENC A,B,I – HALL A,B,C + HALL A,B,C – 10k+5V20k+5V20k+5V10k+5V10k5kENC A,B,I + OUTENC A,B,I – OUTDC+ MOTOR AMOTOR BMOTOR CDC– POWER MODULEPower StageLogic PowerL1L2L3LOGIC+ LOGIC– Shunt Reg. InputFilterOutputFilterBR60 (50W)
Information on Approvals and Compliances
Compliant with European CE for both the Class A EMC Directive 2004/108/EC on Electromagnetic Compatibility (specifically EN 61000-6-4:2007 and EN 61000-6-2:2005) and LVD requirements of directive 2006/95/EC (specifically EN 60204-1:2006), a low voltage directive to protect users from electrical shock.
RoHS (Reduction of Hazardous Substances) is intended to prevent hazardous substances such as lead from being manufactured in electrical and electronic equipment.
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
Sold & Serviced By:
3. DigiFlex® Performance™ Servo Drive DPRNLIE-030A800
SPECIFICATIONS
Power Specifications
Description
Units
Value
Rated Voltage
VAC (VDC)
480 (678)
AC Supply Voltage Range
VAC
200 - 480
AC Supply Minimum
VAC
180
AC Supply Maximum
VAC
528
AC Input Phases
-
3
AC Supply Frequency
Hz
50 - 60
DC Supply Voltage Range1
VDC
255 - 747
DC Bus Over Voltage Limit
VDC
850
DC Bus Under Voltage Limit
VDC
230
Logic Supply Voltage
VDC
20 - 30 (@ 850 mA)
Maximum Peak Output Current2
A (Arms)
30 (21.2)
Maximum Continuous Output Current
A (Arms)
15 (10.6)
Max. Continuous Output Power @ Rated Voltage3
W
6840
Max. Continuous Power Dissipation @ Rated Voltage
W
360
Internal Bus Capacitance
μF
330
External Shunt Resistor Minimum Resistance
-
Contact factory before using an external shunt resistor.
Minimum Load Inductance (Line-To-Line)4
μH
3000
Switching Frequency
kHz
10
Maximum Output PWM Duty Cycle
%
100
Low Voltage Supply Outputs
-
+5 VDC (250 mA)
Control Specifications
Description
Units
Value
Communication Interfaces
-
RS-485/232
Command Sources
-
5V Step and Direction, Encoder Following, Over the Network, PWM and Direction, Sequencing, Indexing, Jogging
Feedback Supported
-
±10 VDC Position, Auxiliary Incremental Encoder, Halls, Incremental Encoder, Tachometer (±10 VDC)
Commutation Methods
-
Sinusoidal, Trapezoidal
Modes of Operation
-
Current, Hall Velocity, Position, Velocity
Motors Supported
-
Closed Loop Vector, Single Phase (Brushed, Voice Coil, Inductive Load), Three Phase (Brushless)
Hardware Protection
-
40+ Configurable Functions, Over Current, Over Temperature (Drive & Motor), Over Voltage, Short Circuit (Phase-Phase & Phase-Ground), Under Voltage
Programmable Digital Inputs/Outputs (PDIs/PDOs)
-
10/4
Programmable Analog Inputs/Outputs (PAIs/PAOs)
-
3/0
Primary I/O Logic Level
-
24 VDC
Current Loop Sample Time
μs
100
Velocity Loop Sample Time
μs
200
Position Loop Sample Time
μs
200
Maximum Encoder Frequency
MHz
20 (5 pre-quadrature)
Internal Shunt Regulator
-
Yes
Internal Shunt Resistor
-
Yes
Mechanical Specifications
Description
Units
Value
Agency Approvals
-
CE Class A (EMC), CE Class A (LVD), RoHS
Size (H x W x D)
mm (in)
300.5 x 232.1 x 91.8 (11.8 x 9.1 x 3.6)
Weight
g (oz)
5426 (191.4)
Heatsink (Base) Temperature Range5
°C (°F)
0 - 75 (32 - 167)
Storage Temperature Range
°C (°F)
-40 - 85 (-40 - 185)
Form Factor
-
Panel Mount
Cooling System
-
Natural Convection
IP Rating
-
IP10
+24V LOGIC Connector
-
2-port, 5.08 mm spaced, enclosed, friction lock header
AUX ENCODER Connector
-
15-pin, high-density, male D-sub
COMM Connector
-
9-pin, female D-sub
DC BUS Connector
-
4-port, 7.62 mm spaced, enclosed, friction lock header
FEEDBACK Connector
-
15-pin, high-density, female D-sub
I/O Connector
-
26-pin, high-density, female D-sub
MOTOR POWER Connector
-
4-port, 7.62 mm spaced, enclosed, friction lock header
POWER Connector
-
3-port, 7.62 mm spaced, enclosed, friction lock header
Notes
1. DC supply operation through the L1, L2, or L3 terminals will reduce peak/cont. current ratings by 30%. See installation manual for details.
2. Capable of supplying drive rated peak current for 2 seconds with 10 second foldback to continuous value. Longer times are possible with lower current limits.
3. P = (DC Rated Voltage) * (Cont. RMS Current) * 0.95.
4. Lower inductance is acceptable for bus voltages well below maximum. Use external inductance to meet requirements.
5. Additional cooling and/or heatsink may be required to achieve rated performance.
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
Sold & Serviced By:
4. DigiFlex® Performance™ Servo Drive DPRNLIE-030A800
PIN FUNCTIONS
+24V LOGIC - Logic Power Connector
Pin
Name
Description / Notes
I/O
1
LOGIC PWR
Logic Supply Input
I
2
LOGIC GND
Logic Supply Ground
GND
AUX ENCODER - Auxiliary Feedback Connector
Pin
Name
Description / Notes
I/O
1
RESERVED
Reserved
-
2
RESERVED
Reserved
-
3
RESERVED
Reserved
-
4
PDI-8 + (PWM+ / AUX ENC A+ / CAP-B+)
Programmable Digital Input or PWM or Auxiliary Encoder or High Speed Capture (For Single-Ended Signals Leave Negative Terminal Open)
I
5
PDI-8 - (PWM- / AUX ENC A- / CAP-B-)
I
6
PDI-9 + (DIR+ / AUX ENC B+ / CAP-C+)
Programmable Digital Input or Direction Input or Auxiliary Encoder or High Speed Capture (For Single-Ended Signals Leave Negative Terminal Open)
I
7
PDI-9 - (DIR- / AUX ENC B- / CAP-C-)
I
8
PDI-10 + (AUX ENC I+ / CAP-A+)
Programmable Digital Input or Auxiliary Encoder or High Speed Capture (For Single-Ended Signals Leave Negative Terminal Open)
I
9
PDI-10 - (AUX ENC I- / CAP-A-)
I
10
SGN GND
Signal Ground
SGND
11
SGN GND
Signal Ground
SGND
12
SGN GND
Signal Ground
SGND
13
+5V OUT
+5V Encoder Supply Output (Short Circuit Protected)
O
14
PAI-3 +
Differential Programmable Analog Input (12-bit Resolution)
I
15
PAI-3 -
I
COMM - RS232/RS485 Communication Connector
Pin
Name
Description / Notes
I/O
1
SELECT
RS232/485 selection. Pull to ground (CN1-5) for RS485.
I
2
RS232 TX / RS485 TX-
Transmit Line (RS-232 or RS-485)
O
3
RS232 RX / RS485 RX-
Receive Line (RS-232 or RS-485)
I
4
RESERVED
Reserved
-
5
ISO GND
Isolated Signal Ground
IGND
6
RS485 TX+
Transmit Line (RS-485)
O
7
RESERVED
Reserved
-
8
RS485 RX+
Receive Line (RS-485)
I
9
RESERVED
Reserved
-
DC BUS - Power Connector1
Pin
Name
Description / Notes
I/O
1
DC-
Internal DC Bus Voltage (Can Be Used To Connect External Shunt Regulator)
I/O
2
BR
External Brake Resistor Connection
-
3
DC+
Brake Resistor DC+. Connection for brake resistor.
O
4
DC+
Internal DC Bus Voltage (Can Be Used To Connect External Shunt Regulator)
I/O
1. Contact factory before using an external shunt regulator or brake resistor.
FEEDBACK - Feedback Connector
Pin
Name
Description / Notes
I/O
1
HALL A+
Commutation Sensor Inputs
I
2
HALL B+
I
3
HALL C+
I
4
MOT ENC A+
Differential Encoder A Channel Input (For Single Ended Signals Use Only The Positive Input)
I
5
MOT ENC A-
I
6
MOT ENC B+
Differential Encoder B Channel Input (For Single Ended Signals Use Only The Positive Input)
I
7
MOT ENC B-
I
8
MOT ENC I+
Differential Encoder Index Input (For Single Ended Signals Use Only The Positive Input)
I
9
MOT ENC I-
I
10
HALL A-
Commutation Sensor Input (For Differential Signals Only)
I
11
HALL B-
Commutation Sensor Input (For Differential Signals Only)
I
12
SGN GND
Signal Ground
SGND
13
+5V OUT
+5V Encoder Supply Output (Short Circuit Protected)
O
14
PAI-2
Programmable Analog Input (12-bit Resolution)
I
15
HALL C-
Commutation Sensor Input (For Differential Signals Only)
I ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
Sold & Serviced By:
5. DigiFlex® Performance™ Servo Drive DPRNLIE-030A800
I/O - Signal Connector
Pin
Name
Description / Notes
I/O
1
PDO-1
Isolated Programmable Digital Output
O
2
OUTPUT COMMON
Digital Output Common
OGND
3
PDO-2
Isolated Programmable Digital Output
O
4
PDI-4 - (STEP-)
Programmable Digital Input or Step- (For Differential Signals Only)
I
5
PDI-6 - (DIR-)
Programmable Digital Input or Direction- (For Differential Signals Only)
I
6
PAI-1
Programmable Analog Input (12-bit Resolution)
I
7
SGN GND
Signal Ground
SGND
8
OUTPUT PULL-UP
Digital Output Pull-Up For User Outputs
I
9
PDI-5
Isolated Programmable Digital Input
I
10
PDO-3
Isolated Programmable Digital Output
O
11
PDI-1
Isolated Programmable Digital Input
I
12
PDI-2
Isolated Programmable Digital Input
I
13
PDI-3
Isolated Programmable Digital Input
I
14
PDO-4
Isolated Programmable Digital Output
O
15
INPUT COMMON
Digital Input Common (Can Be Used To Pull-Up Digital Inputs)
IGND
16
SGN GND
Signal Ground
SGND
17
PDI-4 + (STEP+)
Programmable Digital Input or Step+
I
18
PDI-6 + (DIR+)
Programmable Digital Input or Direction+
I
19
PDI-7
Isolated Programmable Digital Input
I
20
ENC A+ OUT
Buffered Encoder Channel A Output
O
21
ENC A- OUT
O
22
ENC B+ OUT
Buffered Encoder Channel B Output
O
23
ENC B- OUT
O
24
ENC I+ OUT
Buffered Encoder Index Output
O
25
ENC I- OUT
O
26
SGN GND
Signal Ground
SGND
MOTOR POWER - Power Connector
Pin
Name
Description / Notes
I/O
1
SHIELD
Motor cable shield. Internally connected to protective earth ground.
-
2
MOTOR C
Motor Phase C
O
3
MOTOR B
Motor Phase B
O
4
MOTOR A
Motor Phase A
O
POWER - Power Connector
Pin
Name
Description / Notes
I/O
1
L3
AC Supply Input (Three Phase)
I
2
L2
I
3
L1
I ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
Sold & Serviced By:
6. DigiFlex® Performance™ Servo Drive DPRNLIE-030A800
HARDWARE SETTINGS
Switch Functions
Switch
Description
Setting
On
Off
1
Bit 0 of binary RS-485 drive address. Does not affect RS-232 settings.
1
0
2
Bit 1 of binary RS-485 drive address. Does not affect RS-232 settings.
1
0
3
Bit 2 of binary RS-485 drive address. Does not affect RS-232 settings.
1
0
4
Bit 3 of binary RS-485 drive address. Does not affect RS-232 settings.
1
0
5
Bit 4 of binary RS-485 drive address. Does not affect RS-232 settings.
1
0
6
Bit 5 of binary RS-485 drive address. Does not affect RS-232 settings.
1
0
7
Bit 0 of drive RS-485 baud rate setting. Does not affect RS-232 settings.
1
0
8
Bit 1 of drive RS-485 baud rate setting. Does not affect RS-232 settings.
1
0
Additional Details
The drive can be configured to use the address and/or bit rate stored in non-volatile memory by setting the address and/or bit rate value to 0. Use the table below to map actual bit rates to a bit rate setting.
Baud Rate (kbps)
Value For Bit Rate Setting
Load from non-volatile memory
0
9.6
1
38.4
2
115.2
3 ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
Sold & Serviced By:
7. DigiFlex® Performance™ Servo Drive DPRNLIE-030A800
MECHANICAL INFORMATION
+24V LOGIC - Logic Power Connector
Connector Information
2-port, 5.08 mm spaced, enclosed, friction lock header
Mating Connector
Details
Phoenix Contact: P/N 1757019
Included with Drive
Yes
LOGIC PWR1LOGIC GND2
AUX ENCODER - Auxiliary Feedback Connector
Connector Information
15-pin, high-density, male D-sub
Mating Connector
Details
TYCO: Plug P/N 1658681-1; Housing P/N 5748677-1; Terminals P/N 1658686-2 (loose) or 1658686-1 (strip)
Included with Drive
No
PDI-8 - (PWM- / AUX ENC A- / CAP-B-)5PDI-8 + (PWM+ / AUX ENC A+ / CAP-B+)4PAI-3 -15PAI-3 +14+5V OUT13SGN GND12SGN GND11SGN GND10PDI-9 + (DIR+ / AUX ENC B+ / CAP-C+)6PDI-10 - (AUX ENC I- / CAP-A-)9PDI-10 + (AUX ENC I+ / CAP-A+)8PDI-9 - (DIR- / AUX ENC B- / CAP-C-)7
COMM - RS232/RS485 Communication Connector
Connector Information
9-pin, female D-sub
Mating Connector
Details
TYCO: Plug P/N 205204-4; Housing P/N 5748677-1; Terminals P/N 1658540-5 (loose) or 1658540-4 (strip)
Included with Drive
No
SELECT1RS232 TX / RS485 TX-2RS232 RX / RS485 RX-3ISO GND5RS485 TX+6RS485 RX+8
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
Sold & Serviced By:
8. DigiFlex® Performance™ Servo Drive DPRNLIE-030A800
DC BUS - Power Connector
Connector Information
4-port, 7.62 mm spaced, enclosed, friction lock header
Mating Connector
Details
Phoenix Contact: P/N 1804920
Included with Drive
Yes
DC-1BR2DC+3DC+4
FEEDBACK - Feedback Connector
Connector Information
15-pin, high-density, female D-sub
Mating Connector
Details
TYCO: Plug P/N 748364-1; Housing P/N 5748677-1; Terminals P/N 1658670-2 (loose) or 1658670-1 (strip)
Included with Drive
No
HALL A+1HALL B+2HALL C+3MOT ENC A+4MOT ENC A-5HALL B-11SGN GND12+5V OUT13PAI-214HALL C-15MOT ENC B+6HALL A-10MOT ENC B-7MOT ENC I+8MOT ENC I-9
I/O - Signal Connector
Connector Information
26-pin, high-density, female D-sub
Mating Connector
Details
TYCO: Plug P/N 1658671-1; Housing P/N 5748677-2; Terminals P/N 1658670-2 (loose) or 1658670-1 (strip)
Included with Drive
No
PDO-1123456897PDO-414PDI-111PDI-212PDI-313PDO-310INPUT COMMON15PDI-4 + (STEP+)17PDI-6 + (DIR+)18SGN GND16OUTPUT COMMONPDI-5OUTPUT PULL-UPSGN GNDPAI-1PDI-6 - (DIR-) PDI-4 - (STEP-) PDO-2PDI-719ENC I+ OUT24ENC B+ OUT22ENC A+ OUT20ENC A-OUT21ENC B-OUT23ENC I-OUT25SGN GND26
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
Sold & Serviced By:
9. DigiFlex® Performance™ Servo Drive DPRNLIE-030A800
MOTOR POWER - Power Connector
Connector Information
4-port, 7.62 mm spaced, enclosed, friction lock header
Mating Connector
Details
Phoenix Contact: P/N 1804920
Included with Drive
Yes
SHIELD1MOTOR C2MOTOR B3MOTOR A4
POWER - Power Connector
Connector Information
3-port, 7.62 mm spaced, enclosed, friction lock header
Mating Connector
Details
Phoenix Contact: P/N 1804917
Included with Drive
Yes
L31L22L13
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
Sold & Serviced By:
11. DigiFlex® Performance™ Servo Drive DPRNLIE-030A800
PART NUMBERING INFORMATION
- Drive SeriesDigiFlex PerformanceCommunicationCommand InputsRPDILNE030A008Example: DPRS232/RS485RCANopen or RS232CEthernet Powerlink or TCP/IPPAnalog (±10V) No Step & DirectionANAnalog (±10V) Low Voltage Step & Direction (5V)ALAnalog (±10V) High Voltage Step & Direction (24V)AHNo AnalogLow Voltage Step & Direction (5V)NLNo Analog, No Step & Direction(Communication Interface Only)NNDigital I/OIsolated (24V)ITTL (5V) Non-IsolatedTMotor FeedbackIncremental Encoder and/or HallsEResolverRAbsolute Sin/Cos (Hiperface & Endat)ASin/Cos with HallsSMax DC Bus Voltage (VDC) 80080200200400400800800AC Input+24VDC User Logic Supply RequiredAAC Input Single Phase Only+24VDC User Logic Supply RequiredSDC InputBoth Logic Supply Options (Internal or User)BDC InputLogic Supply RequiredL15015160162002025025300304004060C060100C100- Code used to identify customer specialsPower and Logic SupplyPeak Current (A0 to Peak) Customer SpecialEtherCATEUniversal (Halls, Inc. Enc., Abs. Enc., 1Vp-p Sin/Cos Enc.)U60060
DigiFlex® Performance™ series of products are available in many configurations. Note that not all possible part number combinations are offered as standard drives. All models listed in the selection tables of the website are readily available, standard product offerings.
ADVANCED Motion Controls also has the capability to promptly develop and deliver specified products for OEMs with volume requests. Our Applications and Engineering Departments will work closely with your design team through all stages of development in order to provide the best servo drive solution for your system. Equipped with on-site manufacturing for quick- turn customs capabilities, ADVANCED Motion Controls utilizes our years of engineering and manufacturing expertise to decrease your costs and time-to-market while increasing system quality and reliability. Feel free to contact Applications Engineering for further information and details.
Examples of Customized Products
Optimized Footprint
Tailored Project File
Private Label Software
Silkscreen Branding
OEM Specified Connectors
Optimized Base Plate
No Outer Case
Increased Current Limits
Increased Current Resolution
Increased Voltage Range
Increased Temperature Range
Conformal Coating
Custom Control Interface
Multi-Axis Configurations
Integrated System I/O
Reduced Profile Size and Weight
Available Accessories
ADVANCED Motion Controls offers a variety of accessories designed to facilitate drive integration into a servo system.
Visit www.a-m-c.com to see which accessories will assist with your application design and implementation.
Drive(s)
Filter Cards
To Motor
All specifications in this document are subject to change without written notice. Actual product may differ from pictures provided in this document.
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
Sold & Serviced By: