The document provides information on the DigiFlex® PerformanceTM Servo Drive DPRAHIE-060A800. It is a fully digital servo drive designed to drive brushed and brushless servomotors in torque, velocity, or position mode. It features space vector modulation, configurable I/O, and compliance with various safety standards. The drive can operate in different modes and accept various command and feedback sources. It provides motor control and interfacing capabilities in a compact package.
Aisling Purcell's presentation from the Google Analytics User Conference in Sydney and Melbourne in 2013. The presentation covers how to optimise your landing pages using Google Analytics and best practices to increase conversions and improve usability.
This is the greatest verse in the bible, it demonstrates the Love of God for man and how God was willing to give the very best thing he had to save us from our sins...
Group #2 Report on "Organizational Behavior" for PA3 - Management in Organizations, College of Public Administration - Tarlac State University. Authored by Omar Navarro Dimarucot
Slack (or Teams) Automation for Bonterra Impact Management (fka Social Soluti...Jeffrey Haguewood
Sidekick Solutions uses Bonterra Impact Management (fka Social Solutions Apricot) and automation solutions to integrate data for business workflows.
We believe integration and automation are essential to user experience and the promise of efficient work through technology. Automation is the critical ingredient to realizing that full vision. We develop integration products and services for Bonterra Case Management software to support the deployment of automations for a variety of use cases.
This video focuses on the notifications, alerts, and approval requests using Slack for Bonterra Impact Management. The solutions covered in this webinar can also be deployed for Microsoft Teams.
Interested in deploying notification automations for Bonterra Impact Management? Contact us at sales@sidekicksolutionsllc.com to discuss next steps.
Accelerate your Kubernetes clusters with Varnish CachingThijs Feryn
A presentation about the usage and availability of Varnish on Kubernetes. This talk explores the capabilities of Varnish caching and shows how to use the Varnish Helm chart to deploy it to Kubernetes.
This presentation was delivered at K8SUG Singapore. See https://feryn.eu/presentations/accelerate-your-kubernetes-clusters-with-varnish-caching-k8sug-singapore-28-2024 for more details.
Securing your Kubernetes cluster_ a step-by-step guide to success !KatiaHIMEUR1
Today, after several years of existence, an extremely active community and an ultra-dynamic ecosystem, Kubernetes has established itself as the de facto standard in container orchestration. Thanks to a wide range of managed services, it has never been so easy to set up a ready-to-use Kubernetes cluster.
However, this ease of use means that the subject of security in Kubernetes is often left for later, or even neglected. This exposes companies to significant risks.
In this talk, I'll show you step-by-step how to secure your Kubernetes cluster for greater peace of mind and reliability.
Encryption in Microsoft 365 - ExpertsLive Netherlands 2024Albert Hoitingh
In this session I delve into the encryption technology used in Microsoft 365 and Microsoft Purview. Including the concepts of Customer Key and Double Key Encryption.
GraphRAG is All You need? LLM & Knowledge GraphGuy Korland
Guy Korland, CEO and Co-founder of FalkorDB, will review two articles on the integration of language models with knowledge graphs.
1. Unifying Large Language Models and Knowledge Graphs: A Roadmap.
https://arxiv.org/abs/2306.08302
2. Microsoft Research's GraphRAG paper and a review paper on various uses of knowledge graphs:
https://www.microsoft.com/en-us/research/blog/graphrag-unlocking-llm-discovery-on-narrative-private-data/
Generating a custom Ruby SDK for your web service or Rails API using Smithyg2nightmarescribd
Have you ever wanted a Ruby client API to communicate with your web service? Smithy is a protocol-agnostic language for defining services and SDKs. Smithy Ruby is an implementation of Smithy that generates a Ruby SDK using a Smithy model. In this talk, we will explore Smithy and Smithy Ruby to learn how to generate custom feature-rich SDKs that can communicate with any web service, such as a Rails JSON API.
Connector Corner: Automate dynamic content and events by pushing a buttonDianaGray10
Here is something new! In our next Connector Corner webinar, we will demonstrate how you can use a single workflow to:
Create a campaign using Mailchimp with merge tags/fields
Send an interactive Slack channel message (using buttons)
Have the message received by managers and peers along with a test email for review
But there’s more:
In a second workflow supporting the same use case, you’ll see:
Your campaign sent to target colleagues for approval
If the “Approve” button is clicked, a Jira/Zendesk ticket is created for the marketing design team
But—if the “Reject” button is pushed, colleagues will be alerted via Slack message
Join us to learn more about this new, human-in-the-loop capability, brought to you by Integration Service connectors.
And...
Speakers:
Akshay Agnihotri, Product Manager
Charlie Greenberg, Host
UiPath Test Automation using UiPath Test Suite series, part 4DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 4. In this session, we will cover Test Manager overview along with SAP heatmap.
The UiPath Test Manager overview with SAP heatmap webinar offers a concise yet comprehensive exploration of the role of a Test Manager within SAP environments, coupled with the utilization of heatmaps for effective testing strategies.
Participants will gain insights into the responsibilities, challenges, and best practices associated with test management in SAP projects. Additionally, the webinar delves into the significance of heatmaps as a visual aid for identifying testing priorities, areas of risk, and resource allocation within SAP landscapes. Through this session, attendees can expect to enhance their understanding of test management principles while learning practical approaches to optimize testing processes in SAP environments using heatmap visualization techniques
What will you get from this session?
1. Insights into SAP testing best practices
2. Heatmap utilization for testing
3. Optimization of testing processes
4. Demo
Topics covered:
Execution from the test manager
Orchestrator execution result
Defect reporting
SAP heatmap example with demo
Speaker:
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
UiPath Test Automation using UiPath Test Suite series, part 3DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 3. In this session, we will cover desktop automation along with UI automation.
Topics covered:
UI automation Introduction,
UI automation Sample
Desktop automation flow
Pradeep Chinnala, Senior Consultant Automation Developer @WonderBotz and UiPath MVP
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
Transcript: Selling digital books in 2024: Insights from industry leaders - T...BookNet Canada
The publishing industry has been selling digital audiobooks and ebooks for over a decade and has found its groove. What’s changed? What has stayed the same? Where do we go from here? Join a group of leading sales peers from across the industry for a conversation about the lessons learned since the popularization of digital books, best practices, digital book supply chain management, and more.
Link to video recording: https://bnctechforum.ca/sessions/selling-digital-books-in-2024-insights-from-industry-leaders/
Presented by BookNet Canada on May 28, 2024, with support from the Department of Canadian Heritage.
Elevating Tactical DDD Patterns Through Object CalisthenicsDorra BARTAGUIZ
After immersing yourself in the blue book and its red counterpart, attending DDD-focused conferences, and applying tactical patterns, you're left with a crucial question: How do I ensure my design is effective? Tactical patterns within Domain-Driven Design (DDD) serve as guiding principles for creating clear and manageable domain models. However, achieving success with these patterns requires additional guidance. Interestingly, we've observed that a set of constraints initially designed for training purposes remarkably aligns with effective pattern implementation, offering a more ‘mechanical’ approach. Let's explore together how Object Calisthenics can elevate the design of your tactical DDD patterns, offering concrete help for those venturing into DDD for the first time!
Essentials of Automations: Optimizing FME Workflows with ParametersSafe Software
Are you looking to streamline your workflows and boost your projects’ efficiency? Do you find yourself searching for ways to add flexibility and control over your FME workflows? If so, you’re in the right place.
Join us for an insightful dive into the world of FME parameters, a critical element in optimizing workflow efficiency. This webinar marks the beginning of our three-part “Essentials of Automation” series. This first webinar is designed to equip you with the knowledge and skills to utilize parameters effectively: enhancing the flexibility, maintainability, and user control of your FME projects.
Here’s what you’ll gain:
- Essentials of FME Parameters: Understand the pivotal role of parameters, including Reader/Writer, Transformer, User, and FME Flow categories. Discover how they are the key to unlocking automation and optimization within your workflows.
- Practical Applications in FME Form: Delve into key user parameter types including choice, connections, and file URLs. Allow users to control how a workflow runs, making your workflows more reusable. Learn to import values and deliver the best user experience for your workflows while enhancing accuracy.
- Optimization Strategies in FME Flow: Explore the creation and strategic deployment of parameters in FME Flow, including the use of deployment and geometry parameters, to maximize workflow efficiency.
- Pro Tips for Success: Gain insights on parameterizing connections and leveraging new features like Conditional Visibility for clarity and simplicity.
We’ll wrap up with a glimpse into future webinars, followed by a Q&A session to address your specific questions surrounding this topic.
Don’t miss this opportunity to elevate your FME expertise and drive your projects to new heights of efficiency.
Essentials of Automations: Optimizing FME Workflows with Parameters
Advanced motion controls dprahie 060a800
1. DigiFlex® Performance™ Servo Drive DPRAHIE-060A800
Description
Power Range
The DigiFlex® Performance™ (DP) Series digital servo drives are designed to drive brushed and brushless servomotors. These fully digital drives operate in torque, velocity, or position mode and employ Space Vector Modulation (SVM), which results in higher bus voltage utilization and reduced heat dissipation compared to traditional PWM. The drive can be configured for a variety of external command signals. Commands can also be configured using the drive’s built-in Motion Engine, an internal motion controller used with distributed motion applications. In addition to motor control, these drives feature dedicated and programmable digital and analog inputs and outputs to enhance interfacing with external controllers and devices.
This DP Series drive features a single RS-232/RS-485 interface used for drive configuration and setup. Drive commissioning is accomplished using DriveWare® 7, available for download at www.a-m-c.com.
All drive and motor parameters are stored in non- volatile memory.
Peak Current 60 A (42.4 ARMS)
Continuous Current 30 A (21.2 ARMS)
Supply Voltage 200 - 480 VAC
Features
Four Quadrant Regenerative Operation
Space Vector Modulation (SVM) Technology
Fully Digital State-of-the-art Design
Programmable Gain Settings
Fully Configurable Current, Voltage, Velocity and Position Limits
PIDF Velocity Loop
PID + FF Position Loop
Compact Size, High Power Density
16-bit Analog to Digital Hardware
Built-in brake/shunt regulator
On-the-Fly Mode Switching
On-the-Fly Gain Set Switching
MODES OF OPERATION
Current
Position
Velocity
Hall Velocity
COMMAND SOURCE
PWM and Direction
Encoder Following
Over the Network
±10 V Analog
24V Step and Direction
Sequencing
Indexing
Jogging
FEEDBACK SUPPORTED
Halls
Incremental Encoder
±10 VDC Position
Auxiliary Incremental Encoder
Tachometer (±10 VDC)
INPUTS/OUTPUTS
3 High Speed Captures
4 Programmable Analog Inputs (16-bit/12-bit Resolution)
3 Programmable Digital Inputs (Differential)
7 Programmable Digital Inputs (Single-Ended)
4 Programmable Digital Outputs (Single-Ended)
COMPLIANCES & AGENCY APPROVALS
CE Class A (LVD)
CE Class A (EMC)
RoHS
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
Sold & Serviced By:
2. DigiFlex® Performance™ Servo Drive DPRAHIE-060A800
BLOCK DIAGRAM
SELECTTX/TX– I/O InterfaceI/O Interface DriveLogicRS232/485InterfaceCONTROL MODULERX/RX– TX+ RX+ ISO GNDPAI-1,4 + (REF+) PAI-1,4 – (REF–) PDI-1,2,3,4,5,6,7 (STEP / DIR / CAP-A) INPUT COMMONPDI-8,9,10 + (PWM+ / DIR+ / AUX ENC A,B + / CAP-B,C+) PDO-1,2,3,4OUTPUT COMMON5k+5V10k+5V10k2.5k20k20k20kPAI-2,3SGN GNDPAI-2: 33kPAI-3: 500k3.75KPDI-8,9,10 – (PWM– / DIR– / AUX ENC A,B – / CAP-B,C–) OUTPUT PULL-UP Motor FeedbackMotor Feedback MOT ENC A,B,I + MOT ENC A,B,I – HALL A,B,C + HALL A,B,C – 10k+5V20k+5V20k+5V10k+5V10k5kENC A,B,I + OUTENC A,B,I – OUTDC+ MOTOR AMOTOR BMOTOR CDC– POWER MODULEPower StageLogic PowerL1L2L3LOGIC+ LOGIC– Shunt Reg. InputFilterOutputFilterBR
Information on Approvals and Compliances
Compliant with European CE for both the Class A EMC Directive 2004/108/EC on Electromagnetic Compatibility (specifically EN 61000-6-4:2007 and EN 61000-6-2:2005) and LVD requirements of directive 2006/95/EC (specifically EN 60204-1:2006), a low voltage directive to protect users from electrical shock.
RoHS (Reduction of Hazardous Substances) is intended to prevent hazardous substances such as lead from being manufactured in electrical and electronic equipment.
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
Sold & Serviced By:
3. DigiFlex® Performance™ Servo Drive DPRAHIE-060A800
SPECIFICATIONS
Power Specifications
Description
Units
Value
Rated Voltage
VAC (VDC)
480 (678)
AC Supply Voltage Range
VAC
200 - 480
AC Supply Minimum
VAC
180
AC Supply Maximum
VAC
528
AC Input Phases
-
3
AC Supply Frequency
Hz
50 - 60
DC Supply Voltage Range1
VDC
255 - 747
DC Bus Over Voltage Limit
VDC
850
DC Bus Under Voltage Limit
VDC
230
Logic Supply Voltage
VDC
20 - 30 (@ 850 mA)
Maximum Peak Output Current2
A (Arms)
60 (42.4)
Maximum Continuous Output Current
A (Arms)
30 (21.2)
Max. Continuous Output Power @ Rated Voltage3
W
13680
Max. Continuous Power Dissipation @ Rated Voltage
W
720
Internal Bus Capacitance
μF
330
External Shunt Resistor Minimum Resistance4
Ω
40
Minimum Load Inductance (Line-To-Line)5
μH
3000
Switching Frequency
kHz
10
Maximum Output PWM Duty Cycle
%
100
Low Voltage Supply Outputs
-
+5 VDC (250 mA)
Control Specifications
Description
Units
Value
Communication Interfaces
-
RS-485/232
Command Sources
-
±10 V Analog, 24V Step and Direction, Encoder Following, Over the Network, PWM and Direction, Sequencing, Indexing, Jogging
Feedback Supported
-
±10 VDC Position, Auxiliary Incremental Encoder, Halls, Incremental Encoder, Tachometer (±10 VDC)
Commutation Methods
-
Sinusoidal, Trapezoidal
Modes of Operation
-
Current, Hall Velocity, Position, Velocity
Motors Supported
-
Closed Loop Vector, Single Phase (Brushed, Voice Coil, Inductive Load), Three Phase (Brushless)
Hardware Protection
-
40+ Configurable Functions, Over Current, Over Temperature (Drive & Motor), Over Voltage, Short Circuit (Phase-Phase & Phase-Ground), Under Voltage
Programmable Digital Inputs/Outputs (PDIs/PDOs)
-
10/4
Programmable Analog Inputs/Outputs (PAIs/PAOs)
-
4/0
Primary I/O Logic Level
-
24 VDC
Current Loop Sample Time
μs
100
Velocity Loop Sample Time
μs
200
Position Loop Sample Time
μs
200
Maximum Encoder Frequency
MHz
20 (5 pre-quadrature)
Internal Shunt Regulator
-
Yes
Internal Shunt Resistor
-
No
Mechanical Specifications
Description
Units
Value
Agency Approvals
-
CE Class A (EMC), CE Class A (LVD), RoHS
Size (H x W x D)
mm (in)
300.5 x 232.1 x 139.3 (11.8 x 9.1 x 5.5)
Weight
g (oz)
6165 (217.5)
Heatsink (Base) Temperature Range6
°C (°F)
0 - 75 (32 - 167)
Storage Temperature Range
°C (°F)
-40 - 85 (-40 - 185)
Form Factor
-
Panel Mount
Cooling System
-
Natural Convection
IP Rating
-
IP10
+24V LOGIC Connector
-
2-port, 5.08 mm spaced, enclosed, friction lock header
AUX ENCODER Connector
-
15-pin, high-density, male D-sub
COMM Connector
-
9-pin, female D-sub
DC BUS Connector
-
4-port, 7.62 mm spaced, enclosed, friction lock header
FEEDBACK Connector
-
15-pin, high-density, female D-sub
I/O Connector
-
26-pin, high-density, female D-sub
MOTOR POWER Connector
-
4-port, 7.62 mm spaced, enclosed, friction lock header
POWER Connector
-
3-port, 7.62 mm spaced, enclosed, friction lock header
Notes
1. DC supply operation through the L1, L2, or L3 terminals will reduce peak/cont. current ratings by 30%. See installation manual for details.
2. Capable of supplying drive rated peak current for 2 seconds with 10 second foldback to continuous value. Longer times are possible with lower current limits.
3. P = (DC Rated Voltage) * (Cont. RMS Current) * 0.95.
4. ADVANCED Motion Controls recommends using an external fuse in series with the shunt resistor. A 3 amp motor delay fuse is typical.
5. Lower inductance is acceptable for bus voltages well below maximum. Use external inductance to meet requirements.
6. Additional cooling and/or heatsink may be required to achieve rated performance.
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
Sold & Serviced By:
4. DigiFlex® Performance™ Servo Drive DPRAHIE-060A800
PIN FUNCTIONS
+24V LOGIC - Logic Power Connector
Pin
Name
Description / Notes
I/O
1
LOGIC PWR
Logic Supply Input
I
2
LOGIC GND
Logic Supply Ground
GND
AUX ENCODER - Auxiliary Feedback Connector
Pin
Name
Description / Notes
I/O
1
RESERVED
Reserved
-
2
RESERVED
Reserved
-
3
RESERVED
Reserved
-
4
PDI-8 + (PWM+ / AUX ENC A+ / CAP-B+)
Programmable Digital Input or PWM or Auxiliary Encoder or High Speed Capture (For Single-Ended Signals Leave Negative Terminal Open)
I
5
PDI-8 - (PWM- / AUX ENC A- / CAP-B-)
I
6
PDI-9 + (DIR+ / AUX ENC B+ / CAP-C+)
Programmable Digital Input or Direction Input or Auxiliary Encoder or High Speed Capture (For Single-Ended Signals Leave Negative Terminal Open)
I
7
PDI-9 - (DIR- / AUX ENC B- / CAP-C-)
I
8
PDI-10 +
Programmable Digital Input (For Single-Ended Signals Leave Negative Terminal Open)
I
9
PDI-10 -
I
10
SGN GND
Signal Ground
SGND
11
SGN GND
Signal Ground
SGND
12
SGN GND
Signal Ground
SGND
13
+5V OUT
+5V Encoder Supply Output (Short Circuit Protected)
O
14
PAI-4 +
Differential Programmable Analog Input (12-bit Resolution)
I
15
PAI-4 -
I
COMM - RS232/RS485 Communication Connector
Pin
Name
Description / Notes
I/O
1
SELECT
RS232/485 selection. Pull to ground (CN1-5) for RS485.
I
2
RS232 TX / RS485 TX-
Transmit Line (RS-232 or RS-485)
O
3
RS232 RX / RS485 RX-
Receive Line (RS-232 or RS-485)
I
4
RESERVED
Reserved
-
5
ISO GND
Isolated Signal Ground
IGND
6
RS485 TX+
Transmit Line (RS-485)
O
7
RESERVED
Reserved
-
8
RS485 RX+
Receive Line (RS-485)
I
9
RESERVED
Reserved
-
DC BUS - Power Connector
Pin
Name
Description / Notes
I/O
1
DC-
Internal DC Bus Voltage (Can Be Used To Connect External Shunt Regulator)
I/O
2
BR
External Brake Resistor Connection
-
3
DC+
Brake Resistor DC+. Connection for brake resistor.
O
4
DC+
Internal DC Bus Voltage (Can Be Used To Connect External Shunt Regulator)
I/O
FEEDBACK - Feedback Connector
Pin
Name
Description / Notes
I/O
1
HALL A+
Commutation Sensor Inputs
I
2
HALL B+
I
3
HALL C+
I
4
MOT ENC A+
Differential Encoder A Channel Input (For Single Ended Signals Use Only The Positive Input)
I
5
MOT ENC A-
I
6
MOT ENC B+
Differential Encoder B Channel Input (For Single Ended Signals Use Only The Positive Input)
I
7
MOT ENC B-
I
8
MOT ENC I+
Differential Encoder Index Input (For Single Ended Signals Use Only The Positive Input)
I
9
MOT ENC I-
I
10
HALL A-
Commutation Sensor Input (For Differential Signals Only)
I
11
HALL B-
Commutation Sensor Input (For Differential Signals Only)
I
12
SGN GND
Signal Ground
SGND
13
+5V OUT
+5V Encoder Supply Output (Short Circuit Protected)
O
14
PAI-3
Programmable Analog Input (12-bit Resolution)
I
15
HALL C-
Commutation Sensor Input (For Differential Signals Only)
I ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
Sold & Serviced By:
5. DigiFlex® Performance™ Servo Drive DPRAHIE-060A800
I/O - Signal Connector
Pin
Name
Description / Notes
I/O
1
PDO-1
Isolated Programmable Digital Output
O
2
OUTPUT COMMON
Digital Output Common
OGND
3
PDO-2
Isolated Programmable Digital Output
O
4
PAI-1 + (REF+)
Differential Programmable Analog Input or Reference Signal Input (16-bit Resolution)
I
5
PAI-1 - (REF-)
I
6
PAI-2
Programmable Analog Input (12-bit Resolution)
I
7
SGN GND
Signal Ground
SGND
8
OUTPUT PULL-UP
Digital Output Pull-Up For User Outputs
I
9
PDI-5
Isolated Programmable Digital Input
I
10
PDO-3
Isolated Programmable Digital Output
O
11
PDI-1
Isolated Programmable Digital Input
I
12
PDI-2
Isolated Programmable Digital Input
I
13
PDI-3
Isolated Programmable Digital Input
I
14
PDO-4
Isolated Programmable Digital Output
O
15
INPUT COMMON
Digital Input Common (Can Be Used To Pull-Up Digital Inputs)
IGND
16
SGN GND
Signal Ground
SGND
17
PDI-4 (STEP)
Isolated Programmable Digital Input or Step
I
18
PDI-6 (DIR)
Isolated Programmable Digital Input or Direction
I
19
PDI-7 (CAP-A)
Isolated Programmable Digital Input or High Speed Capture
I
20
ENC A+ OUT
Buffered Encoder Channel A Output
O
21
ENC A- OUT
O
22
ENC B+ OUT
Buffered Encoder Channel B Output
O
23
ENC B- OUT
O
24
ENC I+ OUT
Buffered Encoder Index Output
O
25
ENC I- OUT
O
26
SGN GND
Signal Ground
SGND
MOTOR POWER - Power Connector
Pin
Name
Description / Notes
I/O
1
SHIELD
Motor cable shield. Internally connected to protective earth ground.
-
2
MOTOR C
Motor Phase C
O
3
MOTOR B
Motor Phase B
O
4
MOTOR A
Motor Phase A
O
POWER - Power Connector
Pin
Name
Description / Notes
I/O
1
L3
AC Supply Input (Three Phase)
I
2
L2
I
3
L1
I ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
Sold & Serviced By:
6. DigiFlex® Performance™ Servo Drive DPRAHIE-060A800
HARDWARE SETTINGS
Switch Functions
Switch
Description
Setting
On
Off
1
Bit 0 of binary RS-485 drive address. Does not affect RS-232 settings.
1
0
2
Bit 1 of binary RS-485 drive address. Does not affect RS-232 settings.
1
0
3
Bit 2 of binary RS-485 drive address. Does not affect RS-232 settings.
1
0
4
Bit 3 of binary RS-485 drive address. Does not affect RS-232 settings.
1
0
5
Bit 4 of binary RS-485 drive address. Does not affect RS-232 settings.
1
0
6
Bit 5 of binary RS-485 drive address. Does not affect RS-232 settings.
1
0
7
Bit 0 of drive RS-485 baud rate setting. Does not affect RS-232 settings.
1
0
8
Bit 1 of drive RS-485 baud rate setting. Does not affect RS-232 settings.
1
0
Additional Details
The drive can be configured to use the address and/or bit rate stored in non-volatile memory by setting the address and/or bit rate value to 0. Use the table below to map actual bit rates to a bit rate setting.
Baud Rate (kbps)
Value For Bit Rate Setting
Load from non-volatile memory
0
9.6
1
38.4
2
115.2
3 ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
Sold & Serviced By:
7. DigiFlex® Performance™ Servo Drive DPRAHIE-060A800
MECHANICAL INFORMATION
+24V LOGIC - Logic Power Connector
Connector Information
2-port, 5.08 mm spaced, enclosed, friction lock header
Mating Connector
Details
Phoenix Contact: P/N 1757019
Included with Drive
Yes
LOGIC PWR1LOGIC GND2
AUX ENCODER - Auxiliary Feedback Connector
Connector Information
15-pin, high-density, male D-sub
Mating Connector
Details
TYCO: Plug P/N 1658681-1; Housing P/N 5748677-1; Terminals P/N 1658686-2 (loose) or 1658686-1 (strip)
Included with Drive
No
PDI-8 - (PWM- / AUX ENC A- / CAP-B-)5PDI-8 + (PWM+ / AUX ENC A+ / CAP-B+)4PAI-4 -15PAI-4 +14+5V OUT13SGN GND12SGN GND11SGN GND10PDI-9 + (DIR+ / AUX ENC B+ / CAP-C+)6PDI-10 -9PDI-10 +8PDI-9 - (DIR- / AUX ENC B- / CAP-C-)7
COMM - RS232/RS485 Communication Connector
Connector Information
9-pin, female D-sub
Mating Connector
Details
TYCO: Plug P/N 205204-4; Housing P/N 5748677-1; Terminals P/N 1658540-5 (loose) or 1658540-4 (strip)
Included with Drive
No
SELECT1RS232 TX / RS485 TX-2RS232 RX / RS485 RX-3ISO GND5RS485 TX+6RS485 RX+8
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
Sold & Serviced By:
8. DigiFlex® Performance™ Servo Drive DPRAHIE-060A800
DC BUS - Power Connector
Connector Information
4-port, 7.62 mm spaced, enclosed, friction lock header
Mating Connector
Details
Phoenix Contact: P/N 1804920
Included with Drive
Yes
DC-1BR2DC+3DC+4
FEEDBACK - Feedback Connector
Connector Information
15-pin, high-density, female D-sub
Mating Connector
Details
TYCO: Plug P/N 748364-1; Housing P/N 5748677-1; Terminals P/N 1658670-2 (loose) or 1658670-1 (strip)
Included with Drive
No
HALL A+1HALL B+2HALL C+3MOT ENC A+4MOT ENC A-5HALL B-11SGN GND12+5V OUT13PAI-314HALL C-15MOT ENC B+6HALL A-10MOT ENC B-7MOT ENC I+8MOT ENC I-9
I/O - Signal Connector
Connector Information
26-pin, high-density, female D-sub
Mating Connector
Details
TYCO: Plug P/N 1658671-1; Housing P/N 5748677-2; Terminals P/N 1658670-2 (loose) or 1658670-1 (strip)
Included with Drive
No
PDO-1123456897PDO-414PDI-111PDI-212PDI-313PDO-310INPUT COMMON15PDI-4 (STEP)17PDI-6 (DIR)18SGN GND16OUTPUT COMMONPDI-5OUTPUT PULL-UPSGN GNDPAI-2PAI-1 - (REF-) PAI-1 + (REF+) PDO-2PDI-7 (CAP-A)19ENC I+ OUT24ENC B+ OUT22ENC A+ OUT20ENC A-OUT21ENC B-OUT23ENC I-OUT25SGN GND26
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
Sold & Serviced By:
9. DigiFlex® Performance™ Servo Drive DPRAHIE-060A800
MOTOR POWER - Power Connector
Connector Information
4-port, 7.62 mm spaced, enclosed, friction lock header
Mating Connector
Details
Phoenix Contact: P/N 1804920
Included with Drive
Yes
SHIELD1MOTOR C2MOTOR B3MOTOR A4
POWER - Power Connector
Connector Information
3-port, 7.62 mm spaced, enclosed, friction lock header
Mating Connector
Details
Phoenix Contact: P/N 1804917
Included with Drive
Yes
L31L22L13
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
Sold & Serviced By:
11. DigiFlex® Performance™ Servo Drive DPRAHIE-060A800
PART NUMBERING INFORMATION
- Drive SeriesDigiFlex PerformanceCommunicationCommand InputsRPDIHAE060A008Example: DPRS232/RS485RCANopen or RS232CEthernet Powerlink or TCP/IPPAnalog (±10V) No Step & DirectionANAnalog (±10V) Low Voltage Step & Direction (5V)ALAnalog (±10V) High Voltage Step & Direction (24V)AHNo AnalogLow Voltage Step & Direction (5V)NLNo Analog, No Step & Direction(Communication Interface Only)NNDigital I/OIsolated (24V)ITTL (5V) Non-IsolatedTMotor FeedbackIncremental Encoder and/or HallsEResolverRAbsolute Sin/Cos (Hiperface & Endat)ASin/Cos with HallsSMax DC Bus Voltage (VDC) 80080200200400400800800AC Input+24VDC User Logic Supply RequiredAAC Input Single Phase Only+24VDC User Logic Supply RequiredSDC InputBoth Logic Supply Options (Internal or User)BDC InputLogic Supply RequiredL15015160162002025025300304004060C060100C100- Code used to identify customer specialsPower and Logic SupplyPeak Current (A0 to Peak) Customer SpecialEtherCATEUniversal (Halls, Inc. Enc., Abs. Enc., 1Vp-p Sin/Cos Enc.)U60060
DigiFlex® Performance™ series of products are available in many configurations. Note that not all possible part number combinations are offered as standard drives. All models listed in the selection tables of the website are readily available, standard product offerings.
ADVANCED Motion Controls also has the capability to promptly develop and deliver specified products for OEMs with volume requests. Our Applications and Engineering Departments will work closely with your design team through all stages of development in order to provide the best servo drive solution for your system. Equipped with on-site manufacturing for quick- turn customs capabilities, ADVANCED Motion Controls utilizes our years of engineering and manufacturing expertise to decrease your costs and time-to-market while increasing system quality and reliability. Feel free to contact Applications Engineering for further information and details.
Examples of Customized Products
Optimized Footprint
Tailored Project File
Private Label Software
Silkscreen Branding
OEM Specified Connectors
Optimized Base Plate
No Outer Case
Increased Current Limits
Increased Current Resolution
Increased Voltage Range
Increased Temperature Range
Conformal Coating
Custom Control Interface
Multi-Axis Configurations
Integrated System I/O
Reduced Profile Size and Weight
Available Accessories
ADVANCED Motion Controls offers a variety of accessories designed to facilitate drive integration into a servo system.
Visit www.a-m-c.com to see which accessories will assist with your application design and implementation.
Drive(s)
Filter Cards
To Motor
All specifications in this document are subject to change without written notice. Actual product may differ from pictures provided in this document.
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
Sold & Serviced By: