Adjustable steel props leaflet
•Download as DOC, PDF•
0 likes•494 views
Adjustable steel props are designed to support floors and beams temporarily. They are manufactured from an outer tube and inner tube welded together to be lightweight. Props come in sizes No.0 to No.4 and are guaranteed to be delivered within 3 days of an order. All props are manufactured according to ISO quality standards.
Report
Share
Report
Share
Recommended
Adjustable steel trench struts leaflet
SCP offers adjustable steel trench struts in sizes No. 0 to No. 3 to support trench linings. The struts feature clawed end plates and are thread rolled for strength without material removal. All SCP trench struts are manufactured according to ISO 9001:2000 quality standards.
Shaking Incubators - SSI2, SSI3
This document summarizes shaking incubators from SHEL LAB, including two benchtop models - the SSI2 Mini Shaker and the larger SSI3 Compact Bench Model. It provides details on their specifications, features, and capacity for holding various flasks and test tubes. Both models offer adjustable temperature and orbital shaking controls and alarms, with the SSI3 having additional adjustable orbit and counterbalance capabilities.
Thomson bronze nut_catalog
This document provides information on bronze nuts and precision lead screws and supernuts. It describes the materials used, including SAE 660 bronze and acetal plastic, as well as their properties. Tables list standard part numbers, dimensions, load ratings and other specifications for bronze nuts in various diameters and for lead screws and accompanying plastic nuts. Design considerations are outlined for factors like temperature limits, load capacity, vibration and noise.
Thomson bsa snab_specsheet
This document provides information on precision lead screws and Supernut assemblies from Ball Screws and Actuators (BS&A). It describes the key features, advantages, design considerations and material properties of BS&A's lead screw and nut assemblies. These include being low cost, customizable, available in a variety of lead sizes and diameters, made from non-corrosive materials, internally lubricated, and capable of operating in various environments and temperatures. It also provides charts specifying dimensional properties, load ratings, temperature limits, and other specifications for BS&A's standard lead screw and nut assembly options.
Zeelander Z44 8 page sales brochure
The document summarizes the Zeelander Z44 yacht. It describes the Z44 as setting new standards in design, quality, and engineering. The interior offers superlative quality and finish with user-friendly amenities like leather, veneers, fabrics, and teak flooring. Specifications include dimensions of 44 feet long, 13 feet wide, drafting 3 feet with a bridge clearance of 12 feet. It can reach speeds of 30-34 knots powered by Volvo Penta engines.
New Nor Fab Cut Pro Natural Tech Data Proof
The document describes fabrics made by NorFab called CUTPRO Natural that are designed for cut protection in industrial work environments. The fabrics combine Kevlar with stainless steel and fiberglass to provide strength, thermal capability, cut resistance, durability, and protection against sharp objects. Garments made from CUTPRO Natural fabrics can provide up to level 4 cut protection, level 5 puncture resistance, and level 3 abrasion resistance. The fabrics have inherent flame resistance and the appearance of natural Kevlar to mask the presence of stainless steel and fiberglass yarns.
Thomson bsa sn_specsheet
This document provides information on precision lead screws and SupernutsTM. It discusses features such as low cost, customization options, variety of lead sizes and diameters, corrosion resistance, lubrication methods, load capacity, temperature limits, length limitations, and material properties. Precision lead screws are presented as an economical solution for linear motion. SupernutTM assemblies are available in plastic or bronze nuts up to 4" diameters.
Thomson bsa veethread_specsheet
This document provides information on precision lead screws and supernuts from Ball Screws and Actuators (BS&A). It lists features such as low cost, customization options, variety of sizes, corrosion resistance, and vibration reduction compared to ball screws. It also provides details on material properties, temperature and load limits, accuracy grades, and self-locking characteristics. The document is intended to help customers understand and select the appropriate lead screw solutions for their linear motion needs.
Recommended
Adjustable steel trench struts leaflet
SCP offers adjustable steel trench struts in sizes No. 0 to No. 3 to support trench linings. The struts feature clawed end plates and are thread rolled for strength without material removal. All SCP trench struts are manufactured according to ISO 9001:2000 quality standards.
Shaking Incubators - SSI2, SSI3
This document summarizes shaking incubators from SHEL LAB, including two benchtop models - the SSI2 Mini Shaker and the larger SSI3 Compact Bench Model. It provides details on their specifications, features, and capacity for holding various flasks and test tubes. Both models offer adjustable temperature and orbital shaking controls and alarms, with the SSI3 having additional adjustable orbit and counterbalance capabilities.
Thomson bronze nut_catalog
This document provides information on bronze nuts and precision lead screws and supernuts. It describes the materials used, including SAE 660 bronze and acetal plastic, as well as their properties. Tables list standard part numbers, dimensions, load ratings and other specifications for bronze nuts in various diameters and for lead screws and accompanying plastic nuts. Design considerations are outlined for factors like temperature limits, load capacity, vibration and noise.
Thomson bsa snab_specsheet
This document provides information on precision lead screws and Supernut assemblies from Ball Screws and Actuators (BS&A). It describes the key features, advantages, design considerations and material properties of BS&A's lead screw and nut assemblies. These include being low cost, customizable, available in a variety of lead sizes and diameters, made from non-corrosive materials, internally lubricated, and capable of operating in various environments and temperatures. It also provides charts specifying dimensional properties, load ratings, temperature limits, and other specifications for BS&A's standard lead screw and nut assembly options.
Zeelander Z44 8 page sales brochure
The document summarizes the Zeelander Z44 yacht. It describes the Z44 as setting new standards in design, quality, and engineering. The interior offers superlative quality and finish with user-friendly amenities like leather, veneers, fabrics, and teak flooring. Specifications include dimensions of 44 feet long, 13 feet wide, drafting 3 feet with a bridge clearance of 12 feet. It can reach speeds of 30-34 knots powered by Volvo Penta engines.
New Nor Fab Cut Pro Natural Tech Data Proof
The document describes fabrics made by NorFab called CUTPRO Natural that are designed for cut protection in industrial work environments. The fabrics combine Kevlar with stainless steel and fiberglass to provide strength, thermal capability, cut resistance, durability, and protection against sharp objects. Garments made from CUTPRO Natural fabrics can provide up to level 4 cut protection, level 5 puncture resistance, and level 3 abrasion resistance. The fabrics have inherent flame resistance and the appearance of natural Kevlar to mask the presence of stainless steel and fiberglass yarns.
Thomson bsa sn_specsheet
This document provides information on precision lead screws and SupernutsTM. It discusses features such as low cost, customization options, variety of lead sizes and diameters, corrosion resistance, lubrication methods, load capacity, temperature limits, length limitations, and material properties. Precision lead screws are presented as an economical solution for linear motion. SupernutTM assemblies are available in plastic or bronze nuts up to 4" diameters.
Thomson bsa veethread_specsheet
This document provides information on precision lead screws and supernuts from Ball Screws and Actuators (BS&A). It lists features such as low cost, customization options, variety of sizes, corrosion resistance, and vibration reduction compared to ball screws. It also provides details on material properties, temperature and load limits, accuracy grades, and self-locking characteristics. The document is intended to help customers understand and select the appropriate lead screw solutions for their linear motion needs.
Perkin elmer-4480
This document provides information about refurbished Perkin-Elmer 4480 sputtering systems. It describes the 4480 as a proven "work horse" system from the 1980s and 1990s that is still used for production and research. It offers checking availability of refurbished and upgraded 4480 systems. It also describes the versatile 4400 series of sputtering deposition systems in general, highlighting their high throughput, high yield, optimum process control, and ability to control critical film characteristics.
Drum manufacturing
The document discusses drum manufacturing for steam boilers. It provides details on:
1) The functions of a boiler drum including steam-water separation, housing equipment for steam purification, and maintaining water level.
2) Standard drum specifications for different MW capacities including plate thickness, length, and weight.
3) Raw material suppliers and plate specifications.
4) Configurations for different MW drums including number of shells and dimensions.
5) The hot forming process including plate heating temperatures and times.
6) Quality checks and non-destructive testing of welds.
7) Other manufacturing steps like circumferential seam welding and hydrotesting.
HBK SF demo report by tuan afaham burah
This document provides instructions for removing weld seams and conditioning surfaces on stainless steel pieces to a satin finish. It describes removing weld seams and imperfections from box columns that are 6 meters long by 1 meter wide and finishing approximately 60 pieces with a total area of 830-900 square meters. Specific abrasives, grinders, and techniques are recommended for removing weld seams on flat surfaces as well as in tight 45 degree angles, and for conditioning the surfaces and achieving a satin finish.
CNP Myszkow - Hot dip galvaning, zink flake plant for fasterns
CNP Centrum Nakładania Powłok has been providing anticorrosive coatings for over 15 years, including hot dip galvanizing, zinc-flake coatings, and shot blasting. They have 4 centrifuges for applying fire-zinc coatings and 2 for low-temperature fire-zinc coatings to fasteners and other small metal elements. CNP also has 1 centrifuge for applying zinc-flake coatings and tests coated products in their salt spray chamber according to ISO standards to ensure high quality anticorrosive coatings.
Lining Concepts for Blast Furnace Stacks
When repairing or re-lining furnace stacks, installation time and the selection of suitable material are decisive criteria for construction site planning.
Qualified consultation by our experienced employees enables the customer to find the best solution for the respective lining requirements from the wide range of material groups. Hereby, the customer's needs and the task on hand are always the central issues: Minimum costs, minimum time, and maximum quality regarding input of labour and product.
Din17175 st35.8 seamless tubes for boilers
This document summarizes the specifications for seamless steel tubes according to DIN17175 St35.8 standards. The tubes are intended for use in boilers, pipelines, pressure vessels and equipment operating up to 600°C. The document outlines the manufacturing process, chemical composition requirements, mechanical properties, dimensions and tolerances, heat treatment processes, packaging details, inspection and certification services, and contact information for the manufacturer.
Exporter a335 gr p91 welded pipe, buy p91 alloy steel seamless pipe & asm...
Exporter a335 gr p91 welded pipe, buy p91 alloy steel seamless pipe & asm...Wuxi xingye special steel Co.,Ltd
This document provides information about ASTM A335 P91 alloy steel pipes produced by Wuxi Xingye Special Steel, including specifications, chemical composition, properties, similar grades, and packaging and inspection services. This type of alloy steel is commonly used in industries like chemical processing and power plants that require withstanding very high heat. The company can produce pipes between 12.7-1200mm in diameter and 1.0-200mm in wall thickness up to 12m in length to meet ASTM A335 P91 Type 2 standards.Seamless steel pipe for lpg gas cylinder
WUXI XINGYE SPECIAL STEEL CO., LTD produces seamless steel pipes for LPG gas cylinders from grades including 37Mn, 34Mn2V, 30CrMo, 35CrMo, 34CrMo4, and 30CrMnSiA. The pipes have outer diameters ranging from 48 to 711mm, wall thicknesses from 3.1 to 38mm, and lengths from 4 to 12m. The company can supply pipes with various heat treatment options and has stock for large gas cylinders. WUXI XINGYE SPECIAL STEEL has experience manufacturing cylinders to client specifications and providing 34CrMo4 steel pipes and other fittings.
Prysmian Bicon Aluminium Claw Cleats - 370 Series Claw Cable Cleat
The Aluminium Claw Cleat is an LUL approved cable cleat manufactured from aluminium alloy. It is suitable for securing cables with diameters between 10-51mm in industrial or outdoor environments. The cleat has a two-piece, single fixing design and can be stacked up to three high. It is resistant to temperatures between -60°C and +105°C.
Prysmian Aluminium Hook Cable Cleats - 371 Series Cable Cleats
The document summarizes an aluminum hook cleat for securing cables. It has the following key details:
- Suitable for cable diameters between 19-76mm
- Manufactured from aluminum alloy and designed for indoor/outdoor industrial use between -60°C to +105°C
- Two-piece, single fixing design that can be double stacked or installed in a temporary open position for single person work
- Meets European safety standards for impact resistance and load limits
Pdf
This document discusses suspended access solutions for challenging work environments. It describes eight types of suspended scaffolding according to OSHA and notes that multi-point systems with rigid platforms consistently outperform other solutions. Choosing the right solution requires considering factors like safety, cost-effectiveness, versatility, and experience working with suspended systems. Flexible decking can be difficult to work on compared to rigid platforms. The document provides examples of using suspended access for bridge and industrial maintenance projects.
Ab9 leaflet
The document summarizes an AB9 Base Jack product from Scaffold & Construction Products. The jack offers strength, quality and efficiency through a rolled thread tubular manufacturing process that reduces weight by 50% while maintaining or exceeding the strength of solid cut bars. All jacks are manufactured according to ISO 9001:2000 standards and are independently tested to comply with British and European scaffolding standards.
Aluminium jack leaflet
The document discusses aluminum base jacks used for scaffold towers. It describes how aluminum jacks are lighter than steel jacks while maintaining strength through a rolled thread tubular manufacturing process pioneered by SCP. This improves handling and lowers transport costs compared to solid cut bars. All SCP jacks are manufactured according to ISO 9001:2000 quality standards and are heat treated to ensure maximum loading.
4 tpi jack leaflet
The document discusses 4TPI Base Jacks manufactured by SCP for scaffolding. The base jacks are made from high grade 5mm steel tube to support a safe working load of 6 tonnes. They have a roll threaded design and independent testing certificates are available. All SCP jacks are manufactured according to ISO 9001:2000 quality standards.
EMF Scaffolding
Scaffolding provides temporary structures to support workers completing jobs. In software, scaffolding brings fast productivity through code generation. Ruby on Rails uses scaffolding to generate code for database entities like classes and data access objects. Scaffolding can be static, generating code on demand, or dynamic, generating code transparently. Model scaffolding aims to enhance modeling by automatically generating partial model structures to reduce modeling effort. Approaches include blind scaffolding that generates elements independently and in-place scaffolding that references generated elements. In-place scaffolding allows customizing generated elements. A rule engine can implement scaffolding by matching conditions and generating new model elements. Scaffolding benefits include accelerated modeling, fast feedback, and flexibility while reducing complexity
Constructability Assessment of Climbing Formwork Systems using Building Infor...
This is the presentation of the conference paper entitled: "Constructability Assessment of Climbing Formwork Systems using Building Information Modeling" by Ramesh Kannan.M & Helen Santhi.M for International Conference on Design and Manufacturing (IConDM 2013) at IIITD&M, Kancheepuram, India on 20th July, 2013.
Teknik-El Formwork Systems
Teknik-El Formwork Systems make it possible to give the desired shape to concrete for any type of construction.
Teknik-El's design and production teams design and manufacture formwork systems for bridges, viaduct constructions, box culverts, underpass buildings, highways and stream tunnels, waste water treatment systems and harbour projects.
Viaduct
This document summarizes the viaduct superstructure construction of Dubai's Red Line metro project. Over 46.5 km of elevated viaduct was constructed using precast concrete segments erected by launching girders, lifting frames, and heavy cranes. Challenges included utility diversions, traffic management during road closures and night work, and coordinating with other infrastructure projects underway. The project involved over 11 million man-hours and up to 3000 workers at its peak to complete the viaduct by August 2008.
Green Metal Formwork for construction of hi-rise building
Environmentally friendly construction method by TLD/Acepac that uses reusable Metal Formwork that shortens construction period due to its ease in setting up and repetitive in nature.
Plastic GMT formwork panel
This document discusses plastic formwork panels that are being used for the Shangrila-UB PH2 project. The panels are lightweight, recyclable, corrosion and impact resistant. They can be reused 25-50 times, cost half as much as plywood, and allow light to pass through without shadows.
Contruction Technology Report (Scaffolding)
This document discusses scaffolding used in construction. It begins by defining scaffolding and its importance for worker safety. It then outlines the key components of scaffolding including standards, ledgers, transoms and fittings. Common scaffolding materials like tubular steel, aluminum alloy and timber are also described. The main types of scaffolding are discussed - supported (e.g. framed, mobile), tube and coupler (e.g. independent, putlog), and suspended. Safety considerations around scaffolding and qualifications for competent persons overseeing scaffolding work are also covered.
Costruction ppt
Formwork is used to mold concrete into desired shapes for slabs, beams, stairs, and other structures. It is made from various materials like wood, plywood, steel, aluminum, and plastics. Proper formwork design and installation is important for quality, safety, and cost-efficiency. Formwork must be assembled correctly, have concrete properly placed, and then stripped at the right time. Different formwork techniques exist for slabs, beams, stairs, and other elements. Factors like reusability, weight, cost, and construction speed influence the choice of formwork material and system.
More Related Content
What's hot
Perkin elmer-4480
This document provides information about refurbished Perkin-Elmer 4480 sputtering systems. It describes the 4480 as a proven "work horse" system from the 1980s and 1990s that is still used for production and research. It offers checking availability of refurbished and upgraded 4480 systems. It also describes the versatile 4400 series of sputtering deposition systems in general, highlighting their high throughput, high yield, optimum process control, and ability to control critical film characteristics.
Drum manufacturing
The document discusses drum manufacturing for steam boilers. It provides details on:
1) The functions of a boiler drum including steam-water separation, housing equipment for steam purification, and maintaining water level.
2) Standard drum specifications for different MW capacities including plate thickness, length, and weight.
3) Raw material suppliers and plate specifications.
4) Configurations for different MW drums including number of shells and dimensions.
5) The hot forming process including plate heating temperatures and times.
6) Quality checks and non-destructive testing of welds.
7) Other manufacturing steps like circumferential seam welding and hydrotesting.
HBK SF demo report by tuan afaham burah
This document provides instructions for removing weld seams and conditioning surfaces on stainless steel pieces to a satin finish. It describes removing weld seams and imperfections from box columns that are 6 meters long by 1 meter wide and finishing approximately 60 pieces with a total area of 830-900 square meters. Specific abrasives, grinders, and techniques are recommended for removing weld seams on flat surfaces as well as in tight 45 degree angles, and for conditioning the surfaces and achieving a satin finish.
CNP Myszkow - Hot dip galvaning, zink flake plant for fasterns
CNP Centrum Nakładania Powłok has been providing anticorrosive coatings for over 15 years, including hot dip galvanizing, zinc-flake coatings, and shot blasting. They have 4 centrifuges for applying fire-zinc coatings and 2 for low-temperature fire-zinc coatings to fasteners and other small metal elements. CNP also has 1 centrifuge for applying zinc-flake coatings and tests coated products in their salt spray chamber according to ISO standards to ensure high quality anticorrosive coatings.
Lining Concepts for Blast Furnace Stacks
When repairing or re-lining furnace stacks, installation time and the selection of suitable material are decisive criteria for construction site planning.
Qualified consultation by our experienced employees enables the customer to find the best solution for the respective lining requirements from the wide range of material groups. Hereby, the customer's needs and the task on hand are always the central issues: Minimum costs, minimum time, and maximum quality regarding input of labour and product.
Din17175 st35.8 seamless tubes for boilers
This document summarizes the specifications for seamless steel tubes according to DIN17175 St35.8 standards. The tubes are intended for use in boilers, pipelines, pressure vessels and equipment operating up to 600°C. The document outlines the manufacturing process, chemical composition requirements, mechanical properties, dimensions and tolerances, heat treatment processes, packaging details, inspection and certification services, and contact information for the manufacturer.
Exporter a335 gr p91 welded pipe, buy p91 alloy steel seamless pipe & asm...
Exporter a335 gr p91 welded pipe, buy p91 alloy steel seamless pipe & asm...Wuxi xingye special steel Co.,Ltd
This document provides information about ASTM A335 P91 alloy steel pipes produced by Wuxi Xingye Special Steel, including specifications, chemical composition, properties, similar grades, and packaging and inspection services. This type of alloy steel is commonly used in industries like chemical processing and power plants that require withstanding very high heat. The company can produce pipes between 12.7-1200mm in diameter and 1.0-200mm in wall thickness up to 12m in length to meet ASTM A335 P91 Type 2 standards.Seamless steel pipe for lpg gas cylinder
WUXI XINGYE SPECIAL STEEL CO., LTD produces seamless steel pipes for LPG gas cylinders from grades including 37Mn, 34Mn2V, 30CrMo, 35CrMo, 34CrMo4, and 30CrMnSiA. The pipes have outer diameters ranging from 48 to 711mm, wall thicknesses from 3.1 to 38mm, and lengths from 4 to 12m. The company can supply pipes with various heat treatment options and has stock for large gas cylinders. WUXI XINGYE SPECIAL STEEL has experience manufacturing cylinders to client specifications and providing 34CrMo4 steel pipes and other fittings.
Prysmian Bicon Aluminium Claw Cleats - 370 Series Claw Cable Cleat
The Aluminium Claw Cleat is an LUL approved cable cleat manufactured from aluminium alloy. It is suitable for securing cables with diameters between 10-51mm in industrial or outdoor environments. The cleat has a two-piece, single fixing design and can be stacked up to three high. It is resistant to temperatures between -60°C and +105°C.
Prysmian Aluminium Hook Cable Cleats - 371 Series Cable Cleats
The document summarizes an aluminum hook cleat for securing cables. It has the following key details:
- Suitable for cable diameters between 19-76mm
- Manufactured from aluminum alloy and designed for indoor/outdoor industrial use between -60°C to +105°C
- Two-piece, single fixing design that can be double stacked or installed in a temporary open position for single person work
- Meets European safety standards for impact resistance and load limits
What's hot (10)
CNP Myszkow - Hot dip galvaning, zink flake plant for fasterns
CNP Myszkow - Hot dip galvaning, zink flake plant for fasterns
Exporter a335 gr p91 welded pipe, buy p91 alloy steel seamless pipe & asm...
Exporter a335 gr p91 welded pipe, buy p91 alloy steel seamless pipe & asm...
Prysmian Bicon Aluminium Claw Cleats - 370 Series Claw Cable Cleat
Prysmian Bicon Aluminium Claw Cleats - 370 Series Claw Cable Cleat
Prysmian Aluminium Hook Cable Cleats - 371 Series Cable Cleats
Prysmian Aluminium Hook Cable Cleats - 371 Series Cable Cleats
Viewers also liked
Pdf
This document discusses suspended access solutions for challenging work environments. It describes eight types of suspended scaffolding according to OSHA and notes that multi-point systems with rigid platforms consistently outperform other solutions. Choosing the right solution requires considering factors like safety, cost-effectiveness, versatility, and experience working with suspended systems. Flexible decking can be difficult to work on compared to rigid platforms. The document provides examples of using suspended access for bridge and industrial maintenance projects.
Ab9 leaflet
The document summarizes an AB9 Base Jack product from Scaffold & Construction Products. The jack offers strength, quality and efficiency through a rolled thread tubular manufacturing process that reduces weight by 50% while maintaining or exceeding the strength of solid cut bars. All jacks are manufactured according to ISO 9001:2000 standards and are independently tested to comply with British and European scaffolding standards.
Aluminium jack leaflet
The document discusses aluminum base jacks used for scaffold towers. It describes how aluminum jacks are lighter than steel jacks while maintaining strength through a rolled thread tubular manufacturing process pioneered by SCP. This improves handling and lowers transport costs compared to solid cut bars. All SCP jacks are manufactured according to ISO 9001:2000 quality standards and are heat treated to ensure maximum loading.
4 tpi jack leaflet
The document discusses 4TPI Base Jacks manufactured by SCP for scaffolding. The base jacks are made from high grade 5mm steel tube to support a safe working load of 6 tonnes. They have a roll threaded design and independent testing certificates are available. All SCP jacks are manufactured according to ISO 9001:2000 quality standards.
EMF Scaffolding
Scaffolding provides temporary structures to support workers completing jobs. In software, scaffolding brings fast productivity through code generation. Ruby on Rails uses scaffolding to generate code for database entities like classes and data access objects. Scaffolding can be static, generating code on demand, or dynamic, generating code transparently. Model scaffolding aims to enhance modeling by automatically generating partial model structures to reduce modeling effort. Approaches include blind scaffolding that generates elements independently and in-place scaffolding that references generated elements. In-place scaffolding allows customizing generated elements. A rule engine can implement scaffolding by matching conditions and generating new model elements. Scaffolding benefits include accelerated modeling, fast feedback, and flexibility while reducing complexity
Constructability Assessment of Climbing Formwork Systems using Building Infor...
This is the presentation of the conference paper entitled: "Constructability Assessment of Climbing Formwork Systems using Building Information Modeling" by Ramesh Kannan.M & Helen Santhi.M for International Conference on Design and Manufacturing (IConDM 2013) at IIITD&M, Kancheepuram, India on 20th July, 2013.
Teknik-El Formwork Systems
Teknik-El Formwork Systems make it possible to give the desired shape to concrete for any type of construction.
Teknik-El's design and production teams design and manufacture formwork systems for bridges, viaduct constructions, box culverts, underpass buildings, highways and stream tunnels, waste water treatment systems and harbour projects.
Viaduct
This document summarizes the viaduct superstructure construction of Dubai's Red Line metro project. Over 46.5 km of elevated viaduct was constructed using precast concrete segments erected by launching girders, lifting frames, and heavy cranes. Challenges included utility diversions, traffic management during road closures and night work, and coordinating with other infrastructure projects underway. The project involved over 11 million man-hours and up to 3000 workers at its peak to complete the viaduct by August 2008.
Green Metal Formwork for construction of hi-rise building
Environmentally friendly construction method by TLD/Acepac that uses reusable Metal Formwork that shortens construction period due to its ease in setting up and repetitive in nature.
Plastic GMT formwork panel
This document discusses plastic formwork panels that are being used for the Shangrila-UB PH2 project. The panels are lightweight, recyclable, corrosion and impact resistant. They can be reused 25-50 times, cost half as much as plywood, and allow light to pass through without shadows.
Contruction Technology Report (Scaffolding)
This document discusses scaffolding used in construction. It begins by defining scaffolding and its importance for worker safety. It then outlines the key components of scaffolding including standards, ledgers, transoms and fittings. Common scaffolding materials like tubular steel, aluminum alloy and timber are also described. The main types of scaffolding are discussed - supported (e.g. framed, mobile), tube and coupler (e.g. independent, putlog), and suspended. Safety considerations around scaffolding and qualifications for competent persons overseeing scaffolding work are also covered.
Costruction ppt
Formwork is used to mold concrete into desired shapes for slabs, beams, stairs, and other structures. It is made from various materials like wood, plywood, steel, aluminum, and plastics. Proper formwork design and installation is important for quality, safety, and cost-efficiency. Formwork must be assembled correctly, have concrete properly placed, and then stripped at the right time. Different formwork techniques exist for slabs, beams, stairs, and other elements. Factors like reusability, weight, cost, and construction speed influence the choice of formwork material and system.
Eta Scaffold Training
Definition
Type of scaffolding system
To familiarize with UAE Legal requirements with respect to Scaffolds
To enhance the skill of scaffold erection and inspection.
Safe Procedure for erection & dismantling
Practical on Scaffold Erection & dismantling
Procedure for Scaffold inspection
Scaffolding
Scaffolding is a temporary structure erected around buildings during construction to support workers and materials. It consists of standards, ledgers, braces, putlogs, transoms, and boarding. The main types are single scaffolding for bricklayers, double scaffolding for masons, cantilever scaffolding, suspended scaffolding where the platform is raised and lowered by ropes or chains, trestle scaffolding on movable bases like ladders, steel scaffolding using tubes for strength and durability, and patented scaffolding available commercially with special couplings and adjustable platforms.
Formwork
This document provides information on formwork used in concrete construction. It defines formwork and lists its common materials as steel and wood. It describes the major objectives in formwork as quality, safety, and economy. It discusses the various types of formwork including temporary and permanent structures. It also provides details on formwork for different structural elements like walls, columns, slabs, beams, stairs, and chimneys. Finally, it covers topics like requirements, loads, design, and maintenance of formwork.
Fromwork
This document provides information about slab formwork, including the types of materials used and the steps for placing formwork. It discusses common materials like timber, steel, plywood, aluminum, and plastic. Timber is described as light weight and economical but other materials like steel and plywood provide better finishes and reusability. The document outlines 11 steps for placing slab formwork, from setting the level marks to applying a shutter oil to prevent concrete sticking. It emphasizes safety, rigidity, and leak-proof joints in the formwork design.
Scaffolding
The document discusses scaffolding language instruction. It begins with an agenda and introduction of the presenter. Scaffolding is then defined as temporary support that helps students develop new language skills, relating it to Vygotsky's zone of proximal development. An example is given of a father scaffolding his son's storytelling about visiting the zoo. Various scaffolding techniques are presented, including reducing degrees of freedom, message abundance, and joint construction of dialogues. The presentation concludes with a discussion of scaffolding activities teachers can use in the classroom.
Scaffolding and zone of proximal development
Scaffolding refers to providing contextual supports for learning through simplified language, modeling, visuals and cooperative learning. It involves guiding a learner's development with focused questions and interactions. Jerome Bruner first introduced the theory of scaffolding in the 1950s to describe how parents facilitate children's language acquisition through informal instruction. Lev Vygotsky introduced the concept of the Zone of Proximal Development (ZPD), defined as the difference between what a learner can do independently and what they can do with guidance. Within the ZPD, learning is most effective when aimed at the learner's potential rather than independent level. Scaffolding helps learners develop skills within their ZPD before the supports are gradually removed.
Scaffolding Software: A Decision Making Tool for Inspections & Material Manag...
Scaffolding Software: A Decision Making Tool for Inspections & Material Manag...ASK EHS Engineering & Consultants
ASK-EHS Scaffolding Management Software (http://www.ask-ehs.com/software/scaffolding-management-software.html) Important Features:
► Extension of Software to Smart (handheld) Devices
The idea of extending the software application to handheld devices was explored. This would help crew members utilize the software from the field itself. They would be able to generate a request for a scaffold from the site while the production supervisor could fill in his production report from the site itself. The Area authority would then approve the request at any time based on information available on his smart device and from anywhere (e.g. airport, during business trip, travelling from home to office). A lot of the user’s time would be saved because of this feature as they would not be required to come at their offices to make entries and/or to access the software.
► Operating in Offline Mode
It was discussed and thought that software would be developed in a manner where it can be operated in offline mode as well. Most of the users on the field would be in places where they would find difficulty in connecting with available networks. Hence software was developed in a way where It didn’t require continuous network connectivity. The user would be able to see the data in offline mode, raise request, approve request, fill production report etc. without any network connectivity. Once the device connects to a network, the data would be synchronized to the server. This was one of the major features as it would negate one of the most persistent and common problems on project sites – unavailability of network (connectivity).
► Simplicity and Ease-of-Use
Forms needed to be simple such that it included only important information. Furthermore, complexities in reporting were also solved by calibrating the software to generate ‘real time’ analytics, graphs, charts & KPIs.
► User Friendly Application
Dropdowns were included in the form at various places such that users can easily make data entries in the software
► Other Value Additions
The Software would be designed with the intention of providing various tools that included visual appearance of the site. Features like area-map tool, image capturing & annotation tool were included for the purpose. Because of these tools, authorities would be able to see the current status of all the scaffolds standing on the site. Additionally, they could see images from various angles for the scaffold requirement and in most of the cases, personal visit to site could be eliminated. While this is mandatory in all cases before approving a request, these features helped in eliminating a major part of the personal visits that would otherwise be taken.Viewers also liked (19)
Constructability Assessment of Climbing Formwork Systems using Building Infor...
Constructability Assessment of Climbing Formwork Systems using Building Infor...
Green Metal Formwork for construction of hi-rise building
Green Metal Formwork for construction of hi-rise building
Scaffolding Software: A Decision Making Tool for Inspections & Material Manag...
Scaffolding Software: A Decision Making Tool for Inspections & Material Manag...
Similar to Adjustable steel props leaflet
Bulb Flats Brochure
Bulb flats are a cost-effective and corrosion-resistant solution for plate stiffening. They have an excellent strength-to-weight ratio and rounded edges that eliminate the need for grinding. This reduces costs during fabrication and extends the life of paint protection against corrosion. British Steel produces bulb flats in various grades and dimensions, with complete traceability. They can be blast cleaned and primed for enhanced fabrication and corrosion protection.
Korean stainless wire & cable b2 k
This document provides information about B2K Wire Co., Ltd., including their contact information, factory locations, product offerings, and specifications. It introduces B2K as an integrated wire drawing specialist that guarantees total process control and manufactures a variety of stainless steel wires and ropes. Product lines mentioned include spring wire, cold heading wire, free machining wire, and stranding/roping wire, along with specifications for each.
2.5.2 Mez Rip Pin
This document discusses welding studs and accessories for fastening insulation material to metal surfaces. It describes MEZ-RIP-PIN welding studs made of galvanized steel with spherical heads and diamond tips in various lengths and packaging. Lock washers and nylon protective caps are also described. Guidelines are provided for inserting the studs using a welding gun, fastening insulation material, and suggested assembly based on insulation thickness and temperature.
Gunung Raja Paksi-Catalogue-2019.pdf
PT. Gunung Raja Paksi commissioned its first hot rolled steel plate in the last quarter of 2000. The document is a product catalogue that provides information on various steel products produced by the company, including flat products like steel plate, hot rolled coil, cold roll coil, and welded beam. It lists specifications, standards, sizes and annual production capacities for these products.
Spec Data Coiled Wire
Southwestern Wire produces various types of coiled tension wire including electric fence wire, vineyard wire, crimped tension wire, and smooth tension wire. The wire comes in gauges from 6 to 14 and can be zinc, aluminized, or PVC coated. The document provides specifications on the manufacturer, various wire types and coatings, mechanical and physical properties, and contact information.
Kiveton Park Steel - Stainless Steel brochure
Kiveton Park Steel is a manufacturer of round and profiled stainless steel bar and wire located in Sheffield, UK. They produce a wide range of stainless steel grades, including 304, 316, and 17-4PH, in various sizes and finishes. Kiveton Park Steel supplies stainless steel products for industrial markets such as petrochemical, engineering, offshore, aerospace, and automotive. They have various processing capabilities including wire drawing, bar drawing, heat treating, grinding, and inspection.
Nuhas Oman LLC brochure
Nuhas is the first and only cable producer in the Middle East to have been certified by DNV, Norway as capable of manufacturing power, control and instrumentation cables for shipboard, high speed/light craft and off-shore cables.
Nuhas Oman LLC
1. Nuhas Oman produces high quality cables and wires using oxygen free copper. It has state-of-the-art manufacturing facilities that meet high standards.
2. The document provides details on the various types of cables produced, including specifications on construction, insulation thickness, diameter, weight and standard lengths. Cable types include single core PVC, flexible cables, fire alarm cables, and flat cables.
3. Nuhas is committed to total quality management to provide best value to customers globally while maintaining environmental protection.
Stainless steel-wires
This document describes Superon Schweisstechnik India Ltd., a leading producer of stainless steel wires and welding consumables in India. It provides details about the company's production facilities and technical collaborations. The company produces a wide range of stainless steel wires for various applications like kitchenware, baskets, springs, and welding. It exports products to over 30 countries worldwide and adheres to international quality and certification standards.
Expinno - Export Catalog
Wire Rod
Reinforcement Steel Bar
Construction Nail
Barbed Wire
Concertina Razor Wire
Cold Drawn Wire
Galvanized Wire Ropes
Black Annealed Wire
Wire Mesh
Hexagonal Wire Mesh
Steel Sheet
Steel in Coil
PVC Coated Wire Mesh
Panel Fence
Metal Profiles
Twisted Wire
Plastic Strip Nails
Concrete Nail
Thomson BSA Bronze Nuts
This document provides information on bronze nuts and precision lead screws and supernuts. It describes the materials used, including SAE 660 bronze and acetal plastic, as well as their properties. Tables list various nut and screw part numbers with corresponding dimensions, load ratings, and other specifications. Application notes discuss design considerations for factors like temperature, load, vibration, and length limitations.
Steelway Brochure Core Products09
Steelway Fensecure manufactures a variety of steel flooring, gratings, and safety products. Their core products include open and solid steel flooring in various depths and load ratings, stair and platform systems, and railings. They offer design, manufacturing, and installation services backed by over 80 years of expertise in steel safety equipment.
Thomson fineline catalog
This document provides information about BS&A FineLine ball screws. It discusses BS&A's proprietary Precision Screw Forming (PSF) Technology, which enables the production of highly accurate ball screws through a rolling process rather than grinding. The technology results in ball screws that achieve accuracies comparable to ground screws but at a lower cost and faster production time. The document also outlines the accuracy and precision classes, preload options, and features of BS&A FineLine ball screws.
Thomson BSA Fineline Ball Screws
This document provides product specifications for BS&A FineLine ball screws in metric unit sizes. It includes tables listing metric part numbers, available assembly configurations, and details on standard ball nut types including flanged, threaded, and end journal options. Engineering specifications are also covered, such as efficiency, torque, life, speed, buckling, and materials.
1.5 fx6cblkflx100
This document provides specifications for single core and multicore flexible cables produced by Finolex for overseas markets. It includes tables listing the technical specifications of various cable types, sizes, and standards they conform to. The cables can be used for applications like UPS cabling, submersible pump wiring, and power distribution. Finolex offers a wide range of cable options that meet various international standards.
BHUSHAN STEEL.pdf BROCHURE FOR STEEL TABLE
This document provides information about the manufacturing process for steel tubes at Bhushan Power and Steel Ltd. It begins with an overview of the company and its products. It then describes the tube manufacturing process which involves forming steel strips into tubular shapes and welding the edges. Various quality tests are conducted including hydraulic testing. Tubes may also be galvanized and threaded. Standards that the company's tubes conform to from various countries are listed. Details on specific tube types including dimensions, tolerances and material properties are provided.
A493 09(2013) standard specification for stainless steel wire and wire rods f...
This document outlines standard specifications for stainless steel wire and wire rods intended for cold heading and forging applications where corrosion resistance is important. It specifies the chemical composition, mechanical properties, manufacturing process requirements, packaging and marking standards for various grades of austenitic, ferritic, and martensitic stainless steel wire. Key information purchasers must provide with orders and supplementary testing requirements are also defined.
As df
Dynamic Forge & Pipe Fitting is an Indian manufacturer and supplier of piping products established in 2011. They produce a wide range of carbon steel, stainless steel, and alloy steel flanges, fittings, pipes, tubes, sheets, and fasteners. Their production facilities allow them to offer prompt delivery of stock and custom orders to meet various international standards and dimensions. They provide fabrication and other services and encourage customers to share their requirements.
Components Corp News: FJ-0603 /FJ-0402 Series of Preform Jumpers suitable for...
New Package Sizes Expand Product Offerings
To accommodate reverse mounting on the circuit board for specific design requirements and optimum use of board real estate, Components’ Corporation offers the FJ-Series of preform jumpers in a variety of package sizes. The FJ-Series is the first true series of printed circuit board jumpers developed specifically for SMT applications.
Copper bonded grounding rod manufacturer
Copper Bonded Grounding Rod AIROD® - Manufacturer, Exporter, Supplier and Wholesaler of Copper Bonded Grounding Rods.
Similar to Adjustable steel props leaflet (20)
A493 09(2013) standard specification for stainless steel wire and wire rods f...
A493 09(2013) standard specification for stainless steel wire and wire rods f...
Components Corp News: FJ-0603 /FJ-0402 Series of Preform Jumpers suitable for...
Components Corp News: FJ-0603 /FJ-0402 Series of Preform Jumpers suitable for...
Adjustable steel props leaflet
- 1. Adjustable Steel Props are designed to support a range of floors and temporary beams. SCP Props are manufactured from an outer tube 60.3mm Dia and an Inner tube of 4.83mm Dia. The threaded portion is friction welded to the outer tube to produce a lighter weight Prop. Adjustable Steel Props are available in sizes No.0 to No.4. Props are guaranteed to be in stock and delivered within 3 days of a order. All SCP Props are manufactured in accordance with ISO 9001:2000 quality system accreditation. Product Description Length (m) Weight (KGs) Code Closed Open 9-270-LWI-00 Standard No. 0 Props 1.041 1.829 11.28 9-270-LWI-01 Standard No. 1 Props 1.753 3.124 16.34 9-270-LWI-02 Standard No. 2 Props 1.981 3.352 17.48 9-270-LWI-03 Standard No. 3 Props 2.590 3.962 20.20 9-270-LWI-04 Standard No. 4 Props 3.200 4.876 23.84 Technical Information All Props are manufactured to BS4074:1982 and tested to Scaffold & Construction Products 1 Station Court BS5507-3:1982. Girton Road Cannock Staffordshire Head and Base Plates 150x150 x 6 mm WS11 OEJ to BS4360 with 38mm Dia hole. Telephone: 01543 467 800 Fax: 01543 467 993 Email: acp@scpburton.co.uk Pin 080M40 BS970. © 2005 Scaffold & Construction Products Finished in one coat air drying. A Division of Alumasc Construction Products Ltd