ABB LV Low Voltage Surge Arresters
ABB LOVOS-5 ABB LOVOS-10
ABB Surge Arresters for Low Voltage Overhead Line Protection
ABB low voltage surge arresters LOVOS-5 and LOVOS-10 are a new generation of LV surge arresters ensuring electrical protection of overhead lines, electric energy receivers, distributing transformers and low voltage electrical equipment. Specify and install ABB LOVOS type surge arresters to protect low voltage power equipment from the effects of lightning and switching overvoltages.
ABB low voltage surge arrester types LOVOS-5 and LOVOS-10 selection criteria : continuous operating voltage Uc, voltage protection level Up and energy absorption capability.
Applications for Low Voltage LV Surge Arresters
The ABB LOVOS range provides protection along LV overhead lines, cables, motors, switches, any equipment connected to the line, from the LV side of distribution transformers up to measuring instruments.
Typical places of installation
Low voltage switchgears, distribution transformers (LV side)
Transition points of insulated and uninsulated, overhead and underground lines and cables
Electricity service entrance locations to buildings (in cabinets or at poles)
At junctions (branching])
Every 500 / 1000 m of overhead line in locations of high lightning activity
At the end of dead-end feeder line
At the sealing ends of inserted cables
At any apparatuses connected to secondary voltage source
ABB LOVOS Low Voltage LV Surge Arresters
ABB LOVOS-5 and ABB LOVOS-10 Low Voltage LV Surge Arresters
The principal active element of ABB LV low voltage LOVOS surge arresters is a metal oxide varistor characterised by high non-linearity - at a working voltage mainly a capacity current flows smaller than 1 mA. Any voltage increase causes a large increase of current flowing through the varistor, leading in turn to immediate limitation of further voltage increase on arrester terminals. When the overvoltage disappears, the surge arrester immediately returns to its basic state. Surge arresters are equipped with a disconnecting device, that disconnects the surge arrester from the low voltage electricity network if it becomes damaged as the result of overvoltage of too high energy or inadmissable voltage increase in the system. If such a situation occurs then the bottom terminal of the disconnecting device is rejected by the spring inside - this terminal remains suspended on an insulation leash.
ABB LOVOS-5 and ABB LOVOS-10 LV Surge Arresters - Advantages
Easy assembly and connection of ABB LOVOS surge arresters
Disconnecting device also fulfills function of damage indicator
Large choice of ABB LOVOS surge arrester accessories
Casing resistant to UV radiation, non-flammable
Maintenance free low voltage surge arresters
All surge arrester accessories are made from corrosion-resistant materials
ABB low voltage surge arresters LOVOS-5 and LOVOS-10 are a new generation of LV surge arresters ensuring electrical protection of overhead lines, electric energy receivers, distributing transformers and low voltage electrical equipment. Specify and install ABB LOVOS type surge arresters to protect low voltage power equipment from the effects of lightning and switching overvoltages.
ABB low voltage surge arrester types LOVOS-5 and LOVOS-10 selection criteria : continuous operating voltage Uc, voltage protection level Up and energy absorption capability.
The ABB LOVOS range provides protection along LV overhead lines, cables, motors, switches, any equipment connected to the line, from the LV side of distribution transformers up to measuring instruments.
Typical places of installation
• low voltage switchgears, distribution transformers (LV side)
• transition points of insulated and uninsulated, overhead and underground lines and cables
• electricity service entrance locations to buildings (in cabinets or at poles)
• at junctions (branching])
• every 500 / 1000 m of overhead line in locations of high lightning activity
• at the end of dead-end feeder line
• at the sealing ends of inserted cables
• at any apparatuses connected to secondary voltage source
ABB Power Products - Low Voltage Capacitators, Low Voltage Surge Arresters, Low Voltage Surge Arresters, Low Voltage Plugs & Sockets ATEX, Medium - High Voltage Fuses (Indoor & Outdoor), Current Transformers, Voltage Transformers, Voltage Surge Arresters, Vacuum Contactors.
ABB Medium Voltage MV Indoor and Outdoor Current Transformers
ABB POWER PRODUCTSABB CT's - Current Transformers
ABB Medium Voltage MV Indoor Bushing Current Transformers CT's, 3.3kV to 11kV/12kV - ABB TTR
ABB Medium Voltage MV Indoor Bushing Current Transformers CT's, up to 25kV - ABB TTR
ABB Medium Voltage MV Indoor Current Transformers CT's, 3.3kV up to 40.5kV - ABB TPU
ABB Medium Voltage MV Indoor Current Transformers CT's, up to 25kV - ABB TPE
ABB Medium Voltage MV Outdoor Current Transformers CT's - ABB KON-17
ABB Medium Voltage MV Outdoor Current Transformers CT's, 17.5kV 24kV 25kV- ABB TPO6
ABB LV Low Voltage Surge Arresters
ABB LOVOS-5 ABB LOVOS-10
ABB Surge Arresters for Low Voltage Overhead Line Protection
ABB low voltage surge arresters LOVOS-5 and LOVOS-10 are a new generation of LV surge arresters ensuring electrical protection of overhead lines, electric energy receivers, distributing transformers and low voltage electrical equipment. Specify and install ABB LOVOS type surge arresters to protect low voltage power equipment from the effects of lightning and switching overvoltages.
ABB low voltage surge arrester types LOVOS-5 and LOVOS-10 selection criteria : continuous operating voltage Uc, voltage protection level Up and energy absorption capability.
Applications for Low Voltage LV Surge Arresters
The ABB LOVOS range provides protection along LV overhead lines, cables, motors, switches, any equipment connected to the line, from the LV side of distribution transformers up to measuring instruments.
Typical places of installation
Low voltage switchgears, distribution transformers (LV side)
Transition points of insulated and uninsulated, overhead and underground lines and cables
Electricity service entrance locations to buildings (in cabinets or at poles)
At junctions (branching])
Every 500 / 1000 m of overhead line in locations of high lightning activity
At the end of dead-end feeder line
At the sealing ends of inserted cables
At any apparatuses connected to secondary voltage source
ABB LOVOS Low Voltage LV Surge Arresters
ABB LOVOS-5 and ABB LOVOS-10 Low Voltage LV Surge Arresters
The principal active element of ABB LV low voltage LOVOS surge arresters is a metal oxide varistor characterised by high non-linearity - at a working voltage mainly a capacity current flows smaller than 1 mA. Any voltage increase causes a large increase of current flowing through the varistor, leading in turn to immediate limitation of further voltage increase on arrester terminals. When the overvoltage disappears, the surge arrester immediately returns to its basic state. Surge arresters are equipped with a disconnecting device, that disconnects the surge arrester from the low voltage electricity network if it becomes damaged as the result of overvoltage of too high energy or inadmissable voltage increase in the system. If such a situation occurs then the bottom terminal of the disconnecting device is rejected by the spring inside - this terminal remains suspended on an insulation leash.
ABB LOVOS-5 and ABB LOVOS-10 LV Surge Arresters - Advantages
Easy assembly and connection of ABB LOVOS surge arresters
Disconnecting device also fulfills function of damage indicator
Large choice of ABB LOVOS surge arrester accessories
Casing resistant to UV radiation, non-flammable
Maintenance free low voltage surge arresters
All surge arrester accessories are made from corrosion-resistant materials
ABB low voltage surge arresters LOVOS-5 and LOVOS-10 are a new generation of LV surge arresters ensuring electrical protection of overhead lines, electric energy receivers, distributing transformers and low voltage electrical equipment. Specify and install ABB LOVOS type surge arresters to protect low voltage power equipment from the effects of lightning and switching overvoltages.
ABB low voltage surge arrester types LOVOS-5 and LOVOS-10 selection criteria : continuous operating voltage Uc, voltage protection level Up and energy absorption capability.
The ABB LOVOS range provides protection along LV overhead lines, cables, motors, switches, any equipment connected to the line, from the LV side of distribution transformers up to measuring instruments.
Typical places of installation
• low voltage switchgears, distribution transformers (LV side)
• transition points of insulated and uninsulated, overhead and underground lines and cables
• electricity service entrance locations to buildings (in cabinets or at poles)
• at junctions (branching])
• every 500 / 1000 m of overhead line in locations of high lightning activity
• at the end of dead-end feeder line
• at the sealing ends of inserted cables
• at any apparatuses connected to secondary voltage source
ABB Power Products - Low Voltage Capacitators, Low Voltage Surge Arresters, Low Voltage Surge Arresters, Low Voltage Plugs & Sockets ATEX, Medium - High Voltage Fuses (Indoor & Outdoor), Current Transformers, Voltage Transformers, Voltage Surge Arresters, Vacuum Contactors.
ABB Medium Voltage MV Indoor and Outdoor Current Transformers
ABB POWER PRODUCTSABB CT's - Current Transformers
ABB Medium Voltage MV Indoor Bushing Current Transformers CT's, 3.3kV to 11kV/12kV - ABB TTR
ABB Medium Voltage MV Indoor Bushing Current Transformers CT's, up to 25kV - ABB TTR
ABB Medium Voltage MV Indoor Current Transformers CT's, 3.3kV up to 40.5kV - ABB TPU
ABB Medium Voltage MV Indoor Current Transformers CT's, up to 25kV - ABB TPE
ABB Medium Voltage MV Outdoor Current Transformers CT's - ABB KON-17
ABB Medium Voltage MV Outdoor Current Transformers CT's, 17.5kV 24kV 25kV- ABB TPO6
Catalog thiết bị đóng cắt Fuji Electric - 07 - ELCB
*********************************************************************
CTY TNHH HẠO PHƯƠNG - Nhà phân phối chính thức các thiết bị điện công nghiệp và tự động hóa của hãng FUJI ELECTRIC JAPAN tại Việt Nam
Xem chi tiết các sản phẩm Fuji Electric tại
http://haophuong.com/b1033533/fuji-electric
ELCB Fuji: thiết bị đóng cắt Fuji
Beeteco.com là trang mua sắm trực tuyến thiết bị điện - Tự động hóa uy tín tại Việt Nam.
Chuyên cung cấp các thiết bị: Đèn báo nút nhấn, Relay, Timer, Contactor, MCCB ELCB, Biến tần, Van, Thiết bị cảm biến, phụ kiện tủ điện, .... Từ các thương hiệu hàng đầu trên thế giới.
www.beeteco.com @ Công ty TNHH TM KT ASTER
Số 7 Đại Lộ Độc Lập, KCN Sóng Thần 1, P. Dĩ An, Tx. Dĩ An, Bình Dương
www.facebook.com/beeteco
Tel: 0650 3617 012
Catalog thiết bị đóng cắt Fuji Electric - 01 - Contactor
*********************************************************************
CTY TNHH HẠO PHƯƠNG - Nhà phân phối chính thức các thiết bị điện công nghiệp và tự động hóa của hãng FUJI ELECTRIC JAPAN tại Việt Nam
Xem chi tiết các sản phẩm Fuji Electric tại
http://haophuong.com/b1033533/fuji-electric
Nobody is save against potential electricity failures. It does not take much for a current that serves us well to bring extreme danger to our everyday life. The most reasonable way to reduce the risk is to use a protection equipment RCCB (residual current device).
Protections:
Nexans Euromold 600 series high voltage bushings feature 5/8" threaded bushings for in air installed HV equipment including transformers, switchgears and capacitors. Nexans Euromold bushings are moulded from epoxy resin in accordance with CENELEC EN 50181.
Nexans Euromold bolted type equipment bushings meet the requirements of IEC137, IEC71 and ANSI/IEEE std. 386.
* Nexans Euromold Bushings 600TBC 11kV 12kV
* Nexans Euromold Bushings K600TBC 24kV
MCCB Fuji - Molded Case Circuit Breakers Fuji
Beeteco.com là trang mua sắm trực tuyến thiết bị điện - Tự động hóa uy tín tại Việt Nam.
Chuyên cung cấp các thiết bị: Đèn báo nút nhấn, Relay, Timer, Contactor, MCCB ELCB, Biến tần, Van, Thiết bị cảm biến, phụ kiện tủ điện, .... Từ các thương hiệu hàng đầu trên thế giới.
www.beeteco.com @ Công ty TNHH TM KT ASTER
Số 7 Đại Lộ Độc Lập, KCN Sóng Thần 1, P. Dĩ An, Tx. Dĩ An, Bình Dương
www.facebook.com/beeteco
Tel: 0650 3617 012
Fuji thiet bi dien-elcbfuji-160413044256Thuan Kieu
Fuji thiet bi dien-elcbfuji-160413044256
Catalog Fuji,
Catalog Thiết Bị Điện Fuji,
Catalog Điện Công Nghiệp Fuji,
http://dienhathe.com,
Xem thêm các sản phẩm khác của Fuji tại https://dienhathe.com
Để nhận báo giá sản phẩm Fuji vui lòng gọi: 0907.764.966
Catalog thiết bị đóng cắt Fuji Electric - 07 - ELCB
*********************************************************************
CTY TNHH HẠO PHƯƠNG - Nhà phân phối chính thức các thiết bị điện công nghiệp và tự động hóa của hãng FUJI ELECTRIC JAPAN tại Việt Nam
Xem chi tiết các sản phẩm Fuji Electric tại
http://haophuong.com/b1033533/fuji-electric
ELCB Fuji: thiết bị đóng cắt Fuji
Beeteco.com là trang mua sắm trực tuyến thiết bị điện - Tự động hóa uy tín tại Việt Nam.
Chuyên cung cấp các thiết bị: Đèn báo nút nhấn, Relay, Timer, Contactor, MCCB ELCB, Biến tần, Van, Thiết bị cảm biến, phụ kiện tủ điện, .... Từ các thương hiệu hàng đầu trên thế giới.
www.beeteco.com @ Công ty TNHH TM KT ASTER
Số 7 Đại Lộ Độc Lập, KCN Sóng Thần 1, P. Dĩ An, Tx. Dĩ An, Bình Dương
www.facebook.com/beeteco
Tel: 0650 3617 012
Catalog thiết bị đóng cắt Fuji Electric - 01 - Contactor
*********************************************************************
CTY TNHH HẠO PHƯƠNG - Nhà phân phối chính thức các thiết bị điện công nghiệp và tự động hóa của hãng FUJI ELECTRIC JAPAN tại Việt Nam
Xem chi tiết các sản phẩm Fuji Electric tại
http://haophuong.com/b1033533/fuji-electric
Nobody is save against potential electricity failures. It does not take much for a current that serves us well to bring extreme danger to our everyday life. The most reasonable way to reduce the risk is to use a protection equipment RCCB (residual current device).
Protections:
Nexans Euromold 600 series high voltage bushings feature 5/8" threaded bushings for in air installed HV equipment including transformers, switchgears and capacitors. Nexans Euromold bushings are moulded from epoxy resin in accordance with CENELEC EN 50181.
Nexans Euromold bolted type equipment bushings meet the requirements of IEC137, IEC71 and ANSI/IEEE std. 386.
* Nexans Euromold Bushings 600TBC 11kV 12kV
* Nexans Euromold Bushings K600TBC 24kV
MCCB Fuji - Molded Case Circuit Breakers Fuji
Beeteco.com là trang mua sắm trực tuyến thiết bị điện - Tự động hóa uy tín tại Việt Nam.
Chuyên cung cấp các thiết bị: Đèn báo nút nhấn, Relay, Timer, Contactor, MCCB ELCB, Biến tần, Van, Thiết bị cảm biến, phụ kiện tủ điện, .... Từ các thương hiệu hàng đầu trên thế giới.
www.beeteco.com @ Công ty TNHH TM KT ASTER
Số 7 Đại Lộ Độc Lập, KCN Sóng Thần 1, P. Dĩ An, Tx. Dĩ An, Bình Dương
www.facebook.com/beeteco
Tel: 0650 3617 012
Fuji thiet bi dien-elcbfuji-160413044256Thuan Kieu
Fuji thiet bi dien-elcbfuji-160413044256
Catalog Fuji,
Catalog Thiết Bị Điện Fuji,
Catalog Điện Công Nghiệp Fuji,
http://dienhathe.com,
Xem thêm các sản phẩm khác của Fuji tại https://dienhathe.com
Để nhận báo giá sản phẩm Fuji vui lòng gọi: 0907.764.966
Fuji thiet bi dien-elcbfuji-160413044256 dienhathe.orgDien Ha The
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.vn
Sensortronics Load Cells from Vishay are some of the highest quality load cells in the market place. Sensortronics is a top manufacturer of sensors used in force-based measurement. The heart of any weighing system is the Sensortronics load cell. While they are not exciting to watch, load cells are highly accurate transducers which provides the user with information not generally obtainable by other technology due to commercial factors. Sensortronics load cells are designed to sense force or weight under a wide range of adverse conditions; they are not only the most essential part of an electronic weighing system, but also the most vulnerable.
In addition, it is imperative that the user selects the correct load cell for the application and provide the necessary care for the load cell during its lifetime. Understanding these important issues and properly maintaining the Sensortronics load cells will ensure trouble free weighing for a long period of time. Load cells may be damaged because of (shock) overloading, lightning strikes or heavy surges in current, chemical or moisture ingress, mishandling (dropping, lifting on cable, etc.), vibration, seismic events or internal component malfunctioning. Also available, great selection of load cells for mixing tanks in a wide variety of styles and capacities.
The cgmcosmos system includes a range of compact (RMU) and modular cubicles with SF6 insulation that allows any electrical configuration for a Medium Voltage Secondary Distribution network of up to 24 kV.
This system has evolved from the CGM-CGC system, and follows the same philosophy developed by Ormazabal 20 years ago.
Catalog thiết bị đóng cắt Fuji Electric - 06 - MCCB & ACB
*********************************************************************
CTY TNHH HẠO PHƯƠNG - Nhà phân phối chính thức các thiết bị điện công nghiệp và tự động hóa của hãng FUJI ELECTRIC JAPAN tại Việt Nam
Xem chi tiết các sản phẩm Fuji Electric tại
http://haophuong.com/b1033533/fuji-electric
We are Manufacturer and Exporter of REAL A Grade Solar Panels in China . Prices are BEST and quality is APPROVED ! Please contact me for your inquiries... ( haldansumer@gmail.com )
Fuji thiet bi dien-cataloguemccbfuji-160413042900Dien Ha The
Fuji thiet bi dien-cataloguemccbfuji-160413042900
Catalog Fuji, Catalog,
Catalog Thiết Bị Điện Fuji, Catalog Thiết Bị Điện,
Catalog Điện Công Nghiệp Fuji, Catalog Điện Công Nghiệp,
http://dienhathe.com,
Xem thêm các sản phẩm khác của Fuji tại https://dienhathe.com
Để nhận báo giá sản phẩm Fuji vui lòng gọi: 0907.764.966
Fuji thiet bi dien-cataloguemccbfuji-160413042900 dienhathe.orgDien Ha The
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.vn
Fuji thiet bi dien-catalogue-mccb-fuji
Catalog Fuji,
Catalog Thiết Bị Điện Fuji,
Catalog Điện Công Nghiệp Fuji,
http://dienhathe.com,
Xem thêm các sản phẩm khác của Fuji tại https://dienhathe.com
Để nhận báo giá sản phẩm Fuji vui lòng gọi: 0907.764.966
Fuji thiet bi dien-catalogue-mccb-fuji dienhathe.orgDien Ha The
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.vn
Fuji thiet bi dien-cataloguemccbfuji-160413042900Thuan Kieu
Fuji thiet bi dien-cataloguemccbfuji-160413042900
Catalog Fuji,
Catalog Thiết Bị Điện Fuji,
Catalog Điện Công Nghiệp Fuji,
http://dienhathe.com,
Xem thêm các sản phẩm khác của Fuji tại https://dienhathe.com
Để nhận báo giá sản phẩm Fuji vui lòng gọi: 0907.764.966
Catalogue mccb doi moi cua hang h yundaiDien Ha The
Catalogue mccb doi moi cua hang h yundai
Catalog Idec, Catalog,
Catalog Thiết Bị Điện Idec, Catalog Thiết Bị Điện,
Catalog Điện Công Nghiệp Idec, Catalog Điện Công Nghiệp,
http://dienhathe.com,
Chi tiết các sản phẩm khác của Idec tại https://dienhathe.com
Xem thêm các Catalog khác của Idec tại https://dienhathe.info
Để nhận báo giá sản phẩm Idec vui lòng gọi: 0907.764.966
Công ty Cổ phần Hạo Phương xin gửi đến quý khách hàng catalog ELCB Fuji dòng G-TWIN mới nhất (2019) đầy đủ thông tin thông số kỹ thuật, kích thước, khối lượng...
Catalog MCCB & ACB Fuji Electric dòng G-TWIN Mới Nhất 2019CTY TNHH HẠO PHƯƠNG
Công ty Cổ phần Hạo Phương xin gửi đến Quý khách hàng Catalog MCCB & ACB Fuji Electric Mới Nhất (2019) gồm
MCCB (Molded case circuit breakers ) dòng G-TWIN
ACB (Air circuit breakers) dòng DH
Quý khách có nhu cầu mua hàng hoặc hợp tác cùng chúng tôi xin vui lòng liên hệ theo địa chỉ :
CÔNG TY CỔ PHẦN HẠO PHƯƠNG
Trụ sở chính:
Địa chỉ: Số 88 đường Vĩnh Phú 40, Kp. Hòa Long, P. Vĩnh Phú, Thuận An, Bình Dương.
Văn phòng Hà Nội:
Địa chỉ: Số 95 TT4 – KĐT Mỹ Đình Sông Đà – Phường Mỹ Đình – Q. Nam Từ Liêm – Hà Nội
Chi nhánh Cambodia:
Địa chỉ: The Park Land SenSok, Borey Chip Mong, House Number 22, P11.Sangkat Phnom Penh Thmey, Khan San Sok, Phnom Penh.
Email: cs@haophuong.com – Website: haophuong.com
Facebook: https://www.facebook.com/haophuongcompany/
HOTLINE: 1800 6547
Similar to ABB POLIM-C..LB Medium Voltage Surge Arresters AC up to 5kV - AC Surge Arresters & Protection for High Voltage Cable Networks (20)
Isolation Procedures for Safe Working on Electrical Systems and Equipment by the JIB | solation Procedures for Safe Working on Electrical Systems and Equipment
This chart shows the safe isolation procedure that you should use when working on electrical systems and equipment.
You'll receive a printed copy of this from your Training Provider, but it's also here as a handy reference to keep electronically.
THE RULES OF SAFE ISOLATION ARE:
Obtain permission to start work (a Permit may be required in some situations)
Identify the source(s) of supply using an approved voltage indicator or test lamp
Prove that the approved voltage indicator or test lamp is functioning correctly
Isolate the supply(s)
Secure the isolation
Prove the system/equipment is DEAD using an approved voltage indicator or test lamp
Prove that the approved voltage indicator or test lamp is functioning correctly
Put up warning signs to tell other people that the electrical installation has been isolated
Once the system/equipment is proved DEAD, work can begin
Uploaded by THORNE & DERRICK LV HV Jointing, Earthing, Substation & Electrical Eqpt | Explosive Atmosphere Experts & ATEX IECEx.
THORNE & DERRICK based in the UK are international distributors of LV, MV & HV Cable Installation, Jointing, Substation & Electrical Equipment.
Since 1985, T&D have established an international reputation based on SERVICE | INTEGRITY | TRUST.
Contact us for 3M, ABB, Alroc, AN Wallis, CATU, Cembre, Centriforce, CMP, CSD, Elastimold, Ellis Patents, Emtelle, Euromold, Filoform , Furse, Lucy Electric & Zodion, Nexans, Pfisterer, Polypipe, Prysmian, Roxtec, Sicame, WT Henley.
Builder.ai Founder Sachin Dev Duggal's Strategic Approach to Create an Innova...Ramesh Iyer
In today's fast-changing business world, Companies that adapt and embrace new ideas often need help to keep up with the competition. However, fostering a culture of innovation takes much work. It takes vision, leadership and willingness to take risks in the right proportion. Sachin Dev Duggal, co-founder of Builder.ai, has perfected the art of this balance, creating a company culture where creativity and growth are nurtured at each stage.
PHP Frameworks: I want to break free (IPC Berlin 2024)Ralf Eggert
In this presentation, we examine the challenges and limitations of relying too heavily on PHP frameworks in web development. We discuss the history of PHP and its frameworks to understand how this dependence has evolved. The focus will be on providing concrete tips and strategies to reduce reliance on these frameworks, based on real-world examples and practical considerations. The goal is to equip developers with the skills and knowledge to create more flexible and future-proof web applications. We'll explore the importance of maintaining autonomy in a rapidly changing tech landscape and how to make informed decisions in PHP development.
This talk is aimed at encouraging a more independent approach to using PHP frameworks, moving towards a more flexible and future-proof approach to PHP development.
Connector Corner: Automate dynamic content and events by pushing a buttonDianaGray10
Here is something new! In our next Connector Corner webinar, we will demonstrate how you can use a single workflow to:
Create a campaign using Mailchimp with merge tags/fields
Send an interactive Slack channel message (using buttons)
Have the message received by managers and peers along with a test email for review
But there’s more:
In a second workflow supporting the same use case, you’ll see:
Your campaign sent to target colleagues for approval
If the “Approve” button is clicked, a Jira/Zendesk ticket is created for the marketing design team
But—if the “Reject” button is pushed, colleagues will be alerted via Slack message
Join us to learn more about this new, human-in-the-loop capability, brought to you by Integration Service connectors.
And...
Speakers:
Akshay Agnihotri, Product Manager
Charlie Greenberg, Host
Search and Society: Reimagining Information Access for Radical FuturesBhaskar Mitra
The field of Information retrieval (IR) is currently undergoing a transformative shift, at least partly due to the emerging applications of generative AI to information access. In this talk, we will deliberate on the sociotechnical implications of generative AI for information access. We will argue that there is both a critical necessity and an exciting opportunity for the IR community to re-center our research agendas on societal needs while dismantling the artificial separation between the work on fairness, accountability, transparency, and ethics in IR and the rest of IR research. Instead of adopting a reactionary strategy of trying to mitigate potential social harms from emerging technologies, the community should aim to proactively set the research agenda for the kinds of systems we should build inspired by diverse explicitly stated sociotechnical imaginaries. The sociotechnical imaginaries that underpin the design and development of information access technologies needs to be explicitly articulated, and we need to develop theories of change in context of these diverse perspectives. Our guiding future imaginaries must be informed by other academic fields, such as democratic theory and critical theory, and should be co-developed with social science scholars, legal scholars, civil rights and social justice activists, and artists, among others.
Epistemic Interaction - tuning interfaces to provide information for AI supportAlan Dix
Paper presented at SYNERGY workshop at AVI 2024, Genoa, Italy. 3rd June 2024
https://alandix.com/academic/papers/synergy2024-epistemic/
As machine learning integrates deeper into human-computer interactions, the concept of epistemic interaction emerges, aiming to refine these interactions to enhance system adaptability. This approach encourages minor, intentional adjustments in user behaviour to enrich the data available for system learning. This paper introduces epistemic interaction within the context of human-system communication, illustrating how deliberate interaction design can improve system understanding and adaptation. Through concrete examples, we demonstrate the potential of epistemic interaction to significantly advance human-computer interaction by leveraging intuitive human communication strategies to inform system design and functionality, offering a novel pathway for enriching user-system engagements.
Let's dive deeper into the world of ODC! Ricardo Alves (OutSystems) will join us to tell all about the new Data Fabric. After that, Sezen de Bruijn (OutSystems) will get into the details on how to best design a sturdy architecture within ODC.
Neuro-symbolic is not enough, we need neuro-*semantic*Frank van Harmelen
Neuro-symbolic (NeSy) AI is on the rise. However, simply machine learning on just any symbolic structure is not sufficient to really harvest the gains of NeSy. These will only be gained when the symbolic structures have an actual semantics. I give an operational definition of semantics as “predictable inference”.
All of this illustrated with link prediction over knowledge graphs, but the argument is general.
JMeter webinar - integration with InfluxDB and GrafanaRTTS
Watch this recorded webinar about real-time monitoring of application performance. See how to integrate Apache JMeter, the open-source leader in performance testing, with InfluxDB, the open-source time-series database, and Grafana, the open-source analytics and visualization application.
In this webinar, we will review the benefits of leveraging InfluxDB and Grafana when executing load tests and demonstrate how these tools are used to visualize performance metrics.
Length: 30 minutes
Session Overview
-------------------------------------------
During this webinar, we will cover the following topics while demonstrating the integrations of JMeter, InfluxDB and Grafana:
- What out-of-the-box solutions are available for real-time monitoring JMeter tests?
- What are the benefits of integrating InfluxDB and Grafana into the load testing stack?
- Which features are provided by Grafana?
- Demonstration of InfluxDB and Grafana using a practice web application
To view the webinar recording, go to:
https://www.rttsweb.com/jmeter-integration-webinar
Kubernetes & AI - Beauty and the Beast !?! @KCD Istanbul 2024Tobias Schneck
As AI technology is pushing into IT I was wondering myself, as an “infrastructure container kubernetes guy”, how get this fancy AI technology get managed from an infrastructure operational view? Is it possible to apply our lovely cloud native principals as well? What benefit’s both technologies could bring to each other?
Let me take this questions and provide you a short journey through existing deployment models and use cases for AI software. On practical examples, we discuss what cloud/on-premise strategy we may need for applying it to our own infrastructure to get it to work from an enterprise perspective. I want to give an overview about infrastructure requirements and technologies, what could be beneficial or limiting your AI use cases in an enterprise environment. An interactive Demo will give you some insides, what approaches I got already working for real.
Slack (or Teams) Automation for Bonterra Impact Management (fka Social Soluti...Jeffrey Haguewood
Sidekick Solutions uses Bonterra Impact Management (fka Social Solutions Apricot) and automation solutions to integrate data for business workflows.
We believe integration and automation are essential to user experience and the promise of efficient work through technology. Automation is the critical ingredient to realizing that full vision. We develop integration products and services for Bonterra Case Management software to support the deployment of automations for a variety of use cases.
This video focuses on the notifications, alerts, and approval requests using Slack for Bonterra Impact Management. The solutions covered in this webinar can also be deployed for Microsoft Teams.
Interested in deploying notification automations for Bonterra Impact Management? Contact us at sales@sidekicksolutionsllc.com to discuss next steps.
Transcript: Selling digital books in 2024: Insights from industry leaders - T...BookNet Canada
The publishing industry has been selling digital audiobooks and ebooks for over a decade and has found its groove. What’s changed? What has stayed the same? Where do we go from here? Join a group of leading sales peers from across the industry for a conversation about the lessons learned since the popularization of digital books, best practices, digital book supply chain management, and more.
Link to video recording: https://bnctechforum.ca/sessions/selling-digital-books-in-2024-insights-from-industry-leaders/
Presented by BookNet Canada on May 28, 2024, with support from the Department of Canadian Heritage.
When stars align: studies in data quality, knowledge graphs, and machine lear...
ABB POLIM-C..LB Medium Voltage Surge Arresters AC up to 5kV - AC Surge Arresters & Protection for High Voltage Cable Networks
1. Data sheet
Surge arrester
POLIM-C..LB
Overvoltage protection of
-Cable sheath
-Motors
Application
-Alternating current (AC)
-Indoor
Technical data
Surge arrester with metal oxide resistors without spark gaps
(MO surge arrester), direct molded silicone housing, grey
color, designed and tested according to IEC 60099-4.
Nominal discharge current In 8/20 µs 10 kA peak
Line discharge class (LD) 2
High current impulse Ihc 4/10 µs 100 kA peak
Long duration current impulse 550 A / 2000 µs
The thermal stability of the MO surge arrester is proved in the
operating duty test according to LD 2, which gives an energy
input of 5.5 kJ/kV (Uc).
Power frequency voltage versus time characteristic (TOV)
with prior energy input
t = 1 s UTOV = 1.31 × Uc
t = 3 s UTOV = 1.28 × Uc
t = 10 s UTOV = 1.25 × Uc
Mechanical loads
Torque moment 30 Nm
Tensile strength axial 1000 N
General data
Ambient air temperature –60 to +40 °C (for higher values
contact manufacturer)
Altitude up to 1800 m (for higher values
contact manufacturer)
Frequency of system voltage 16.7/50/60 Hz
2. 2 POLIM-C..LB | Surge arrester
Electrical data
Uc
Continuous
operating
voltage
Ur
Rated
voltage
Residual voltage Ures in kV peak at specified impulse current
wave 1/…µs wave 8/20 μs wave 30/60 μs
kV kV 5 kA 10 kA 1.0 kA 2.5 kA 5 kA 10 kA 20 kA 125 A 250 A 500 A
rms rms peak peak peak peak peak peak peak peak peak peak
2.3 2.88 8.7 9.7 6.8 7.2 7.5 7.9 9.1 5.9 6.1 6.4
3.0 3.75 11.2 12.3 8.8 9.3 9.8 10.3 11.8 7.7 8.0 8.3
4.0 5.0 14.8 16.1 11.8 12.5 13.1 13.8 15.8 10.3 10.7 11.1
4.8 6.0 17.5 19.0 14.1 14.9 15.6 16.5 18.9 12.3 12.8 13.2
3. Surge arrester | POLIM-C..LB 3
Housing
Dimensions (mm)
Uc
Continuous
operating
voltage
Creepage
distance
Flashover
distance
Recommended
minimum
clearances
Height
A
Height
B
Weight Insulation withstand voltage of empty housing
1.2/50 μs 1 min dry
required values
acc. to IEC
guaranteed required values
acc. to IEC
guaranteed
Emin Fmin
kV rms mm mm mm mm mm mm kg kV peak kV peak kV rms kV rms
2.3 93 93 42 77 85.5 55.5 < 0.62 11.9 60 4.8 14
3.0 93 93 49 77 85.5 55.5 < 0.65 15.4 60 6.3 14
4.0 115 115 60 92 108 78 < 0.87 21.0 60 8.4 14
4.8 115 115 69 104 108 78 < 0.91 25.0 60 9.9 14
Standard dimensions without accessories (may be subject to changes)
Dimensions according outline drawing 1HC0020135
Outline drawings with accessories on request
Structure of type designation
POLIM-C 4.0 LB
Type of arrester
Uc = Continuous operating voltage
Housing