The SIPROTEC 7UT612 differential protection relay are used for fast and selective fault clearing of short-circuits in transformers of all voltage levels and also in rotating electric machines like motors and generators, for short lines and busbars. The protection relay can be parameterized for use with threephase and single-phase transformers.
The SIPROTEC 7UT612 differential protection relay are used for fast and selective fault clearing of short-circuits in transformers of all voltage levels and also in rotating electric machines like motors and generators, for short lines and busbars. The protection relay can be parameterized for use with threephase and single-phase transformers.
EXPERIENCE WITH EQUIPMENT
FOR SERIES AND SHUNT
COMPENSATION SERIES AND SHUNT COMPENSATION SERIES AND SHUNT COMPENSATION SERIES AND SHUNT COMPENSATION SERIES AND SHUNT COMPENSATION SERIES AND SHUNT COMPENSATION SERIES AND SHUNT COMPENSATION SERIES AND SHUNT COMPENSATION SERIES AND SHUNT COMPENSATION SERIES AND SHUNT COMPENSATION SERIES AND SHUNT COMPENSATION SERIES AND SHUNT COMPENSATION SERIES AND SHUNT COMPENSATION SERIES AND SHUNT COMPENSATION SERIES AND SHUNT COMPENSATION SERIES AND SHUNT COMPENSATION SERIES AND SHUNT COMPENSATION
Medium Voltage Terminations- up to 42kV.| AKBAR TRADING EST.| mail@akbartradi...AKBAR TRADING
Cold Applied:
• TFTI-TFTO:
Single Core Polymeric Cable Termination - Pre Expanded on Holdout - up to 42kV
• TFTI-TFTO:
Single Core Polymeric Cable Termination - Push On - up to 42kV
Heat Shrinkable:
• IXSU/OXSU:
Uniterm - Terminations for Polymeric Cables - up to
42kV
Uniterm - Terminations for Polymeric Cables - up to
42kV - Selection Guide
• IXSU/OXSU - EPKT Quick Reference Guide
Heat Shrinkable Elbows:
• EPKT:
Heat Shrinkable Termination System for cables up to 36kV
Heat Shrinkable Termination Selection Guide
• RSRB:
Inline Bushing Boots
• RSRB:
Right Angle Bushing Boots
Inline & Right Angle Bushing Boot Selection Guide
Push On Elbows:
• RCAB:
Elastomeric Flexible Bushing Boot - up to 17.5kV ONLY
• RCAB:
Inline Cold Applied Boot - up to 24kV ONLY
• RICS:
Insulated Elbow Adaptors - up to 24kV
Insulated Elbow Adaptors - up to 24kV - Selection Guide
• RSES/RSSS:
Insulated Screened Elbows - 250A - up to 24kV
• RSTI:
Insulated Screened Elbows - 630A - up to 24kV
• RSTI:
Insulated Screened Elbows - 630A - up to 36kV
• RSTI:
Insulated Screened Elbow - Piggyback Coupling System - up to 36kV
GURO MV:
NEW
GUROFLEX Medium Voltage - Cold pour Insulating Compound
Section 4:
Energy Division
http://energy.tycoelectronics.com
Dear All,
Here i glad to introduced with a basics of Design Electrical which is helpfull to understand the concept of electrical.
I hope you like these concept & prefered the same.
Thanks& Regards,
Pankaj V. Chavan
( 95615 73214 )
ABB Price List of Contactor, Thermal Over load relay, starters, MPCB, Manual Motor Starter, Timers, Auxiliary Blocks, DC Contactor, Capacitor duty contactor, 3 Pole Contactor 4 pole contactor, foru pole, three pole, ac dc combine coil contactor, wide band coil contactors, rail duty contactor
DC SIDE HARMONICS & FILTERING IN HVDC TRANSMISSION SYSTEMS DC SIDE HARMONICS & FILTERING IN HVDC TRANSMISSION SYSTEMS DC SIDE HARMONICS & FILTERING IN HVDC TRANSMISSION SYSTEMS DC SIDE HARMONICS & FILTERING IN HVDC TRANSMISSION SYSTEMS DC SIDE HARMONICS & FILTERING IN HVDC TRANSMISSION SYSTEMS DC SIDE HARMONICS & FILTERING IN HVDC TRANSMISSION SYSTEMS DC SIDE HARMONICS & FILTERING IN HVDC TRANSMISSION SYSTEMS DC SIDE HARMONICS & FILTERING IN HVDC TRANSMISSION SYSTEMS DC SIDE HARMONICS & FILTERING IN HVDC TRANSMISSION SYSTEMS DC SIDE HARMONICS & FILTERING IN HVDC TRANSMISSION SYSTEMS DC SIDE HARMONICS & FILTERING IN HVDC TRANSMISSION SYSTEMS DC SIDE HARMONICS & FILTERING IN HVDC TRANSMISSION SYSTEMS DC SIDE HARMONICS & FILTERING IN HVDC TRANSMISSION SYSTEMS DC SIDE HARMONICS & FILTERING IN HVDC TRANSMISSION SYSTEMS DC SIDE HARMONICS & FILTERING IN HVDC TRANSMISSION SYSTEMS DC SIDE HARMONICS & FILTERING IN HVDC TRANSMISSION SYSTEMS DC SIDE HARMONICS & FILTERING IN HVDC TRANSMISSION SYSTEMS
Comparision Lightning Protection Systems s per IEC 62305-3 and NFC 17-102(2011)/UNE21-1186 India NBC2016 / Project Building and Infra Projects /MEP ,Architect ,Electrical Consultants
What services should a solar project developer expect from solar park & how much each service can be valued.
The ppt clears concept on value add by solar park.
EXPERIENCE WITH EQUIPMENT
FOR SERIES AND SHUNT
COMPENSATION SERIES AND SHUNT COMPENSATION SERIES AND SHUNT COMPENSATION SERIES AND SHUNT COMPENSATION SERIES AND SHUNT COMPENSATION SERIES AND SHUNT COMPENSATION SERIES AND SHUNT COMPENSATION SERIES AND SHUNT COMPENSATION SERIES AND SHUNT COMPENSATION SERIES AND SHUNT COMPENSATION SERIES AND SHUNT COMPENSATION SERIES AND SHUNT COMPENSATION SERIES AND SHUNT COMPENSATION SERIES AND SHUNT COMPENSATION SERIES AND SHUNT COMPENSATION SERIES AND SHUNT COMPENSATION SERIES AND SHUNT COMPENSATION
Medium Voltage Terminations- up to 42kV.| AKBAR TRADING EST.| mail@akbartradi...AKBAR TRADING
Cold Applied:
• TFTI-TFTO:
Single Core Polymeric Cable Termination - Pre Expanded on Holdout - up to 42kV
• TFTI-TFTO:
Single Core Polymeric Cable Termination - Push On - up to 42kV
Heat Shrinkable:
• IXSU/OXSU:
Uniterm - Terminations for Polymeric Cables - up to
42kV
Uniterm - Terminations for Polymeric Cables - up to
42kV - Selection Guide
• IXSU/OXSU - EPKT Quick Reference Guide
Heat Shrinkable Elbows:
• EPKT:
Heat Shrinkable Termination System for cables up to 36kV
Heat Shrinkable Termination Selection Guide
• RSRB:
Inline Bushing Boots
• RSRB:
Right Angle Bushing Boots
Inline & Right Angle Bushing Boot Selection Guide
Push On Elbows:
• RCAB:
Elastomeric Flexible Bushing Boot - up to 17.5kV ONLY
• RCAB:
Inline Cold Applied Boot - up to 24kV ONLY
• RICS:
Insulated Elbow Adaptors - up to 24kV
Insulated Elbow Adaptors - up to 24kV - Selection Guide
• RSES/RSSS:
Insulated Screened Elbows - 250A - up to 24kV
• RSTI:
Insulated Screened Elbows - 630A - up to 24kV
• RSTI:
Insulated Screened Elbows - 630A - up to 36kV
• RSTI:
Insulated Screened Elbow - Piggyback Coupling System - up to 36kV
GURO MV:
NEW
GUROFLEX Medium Voltage - Cold pour Insulating Compound
Section 4:
Energy Division
http://energy.tycoelectronics.com
Dear All,
Here i glad to introduced with a basics of Design Electrical which is helpfull to understand the concept of electrical.
I hope you like these concept & prefered the same.
Thanks& Regards,
Pankaj V. Chavan
( 95615 73214 )
ABB Price List of Contactor, Thermal Over load relay, starters, MPCB, Manual Motor Starter, Timers, Auxiliary Blocks, DC Contactor, Capacitor duty contactor, 3 Pole Contactor 4 pole contactor, foru pole, three pole, ac dc combine coil contactor, wide band coil contactors, rail duty contactor
DC SIDE HARMONICS & FILTERING IN HVDC TRANSMISSION SYSTEMS DC SIDE HARMONICS & FILTERING IN HVDC TRANSMISSION SYSTEMS DC SIDE HARMONICS & FILTERING IN HVDC TRANSMISSION SYSTEMS DC SIDE HARMONICS & FILTERING IN HVDC TRANSMISSION SYSTEMS DC SIDE HARMONICS & FILTERING IN HVDC TRANSMISSION SYSTEMS DC SIDE HARMONICS & FILTERING IN HVDC TRANSMISSION SYSTEMS DC SIDE HARMONICS & FILTERING IN HVDC TRANSMISSION SYSTEMS DC SIDE HARMONICS & FILTERING IN HVDC TRANSMISSION SYSTEMS DC SIDE HARMONICS & FILTERING IN HVDC TRANSMISSION SYSTEMS DC SIDE HARMONICS & FILTERING IN HVDC TRANSMISSION SYSTEMS DC SIDE HARMONICS & FILTERING IN HVDC TRANSMISSION SYSTEMS DC SIDE HARMONICS & FILTERING IN HVDC TRANSMISSION SYSTEMS DC SIDE HARMONICS & FILTERING IN HVDC TRANSMISSION SYSTEMS DC SIDE HARMONICS & FILTERING IN HVDC TRANSMISSION SYSTEMS DC SIDE HARMONICS & FILTERING IN HVDC TRANSMISSION SYSTEMS DC SIDE HARMONICS & FILTERING IN HVDC TRANSMISSION SYSTEMS DC SIDE HARMONICS & FILTERING IN HVDC TRANSMISSION SYSTEMS
Comparision Lightning Protection Systems s per IEC 62305-3 and NFC 17-102(2011)/UNE21-1186 India NBC2016 / Project Building and Infra Projects /MEP ,Architect ,Electrical Consultants
What services should a solar project developer expect from solar park & how much each service can be valued.
The ppt clears concept on value add by solar park.
ABB Medium Voltage MV Indoor and Outdoor Current Transformers
ABB POWER PRODUCTSABB CT's - Current Transformers
ABB Medium Voltage MV Indoor Bushing Current Transformers CT's, 3.3kV to 11kV/12kV - ABB TTR
ABB Medium Voltage MV Indoor Bushing Current Transformers CT's, up to 25kV - ABB TTR
ABB Medium Voltage MV Indoor Current Transformers CT's, 3.3kV up to 40.5kV - ABB TPU
ABB Medium Voltage MV Indoor Current Transformers CT's, up to 25kV - ABB TPE
ABB Medium Voltage MV Outdoor Current Transformers CT's - ABB KON-17
ABB Medium Voltage MV Outdoor Current Transformers CT's, 17.5kV 24kV 25kV- ABB TPO6
ABB are a leading manufacturer of medium voltage (MV) fuses used as main or back up protection elements of systems and apparatus. Fuses (commonly recognized as High Voltage Fuses) are classified as current limiting and non-current limiting (expulsion).
ABB fuses are designed based on wide application experience coming from designing of electrical protection in medium voltage systems and coordination with ABB products where fuses are applicable (air and SF6 insulated switchgears with load break switches, distribution transformers and contactors).
ABB MV HV medium-high voltage fuses protect distribution transformers, motors, switchgear and capacitor banks against overload currents - ABB MV-HV fuses can operate as sole devices or can be combined with air/SF6 insulated switch disconnectors. T&D distribute ABB medium voltage fuses for safe protection of 3.3kV, 6.6kV, 7.2kV, 11kV, 12kV 15kV, 20kV, 22kV, 24kV, 33kV, 36kV and 42kV cable systems.
ABB MV Medium Voltage Transformers - Voltage Transformers VT's
Up to 40.5kV Medium Voltage MV Indoor Transformers VT's
ABB Power Products
ABB MV Medium Voltage Transformers - Voltage Transformer Features
Indoor dry type, cast resin insulated transformers for medium voltages (MV). ABB transformers are suitable for measuring and protection of MV medium voltages with up to 2 secondary windings.
ABB MV Medium Voltage Transformer : Unearthed Double-Pole Voltage Transformer ABB KGUG
ABB KGUG voltage transformer for medium voltage systems has all parts of its primary winding, including terminals, insulated from the earth at a level corresponding to its rated insulation level. ABB KGUG voltage, double-pole insulated transformers are casted in epoxy resin and designed mostly for insulation voltages of 24kV to 36kV.
ABB KGUG Voltage Transformer
ABB MV Medium Voltage Transformer : Indoor Voltage Transformer Double Pole ABB TDC
ABB TDC voltage transformer for medium voltage systems has all parts of its primary winding, including terminals, insulated from the earth at a level corresponding to its rated insulation level . Indoor dry type, cast resin insulated medium voltage (MV) transformer for measuring and protection with up to 2 secondary windings.
ABB TDC Voltage Transformer
ABB MV Indoor Voltage Transformer : Indoor Voltage Transformer ABB TJP
ABB TJP voltage transformer is a single phase voltage transformer which is intended to have one end of its primary winding directly earthed. Indoor dry type, cast resin insulated medium voltage transformer for measuring and protection with up to 2 secondary windings. With or without fuses. Most electrical standards available. Reconnectable MV medium voltage versions available.
ABB TJP Voltage Transformer
ABB MV Indoor Voltage Transformer : Indoor Voltage Transformer Single Pole ABB KGUGI
ABB KGUGI voltage transformer is 36kV indoor dry type, cast resin insulated medium voltage transformers for measuring and protection with up to 2 secondary windings. With or without fuses. Most electrical standards available. Reconnectable versions available.
ABB KGUGI Voltage Transformer
ABB MV Indoor Voltage Transformer : Indoor Voltage Transformer Single Pole ABB TJC
ABB TJC is a single phase voltage transformer which is intended to have one end of its primary winding directly earthed. Indoor dry type, cast resin insulated medium voltage transformer for measuring and protection with up to 2 secondary windings. With or without fuses. Most electrical standards available. Reconnectable MV medium voltage versions available.
400 Series Interface B Nexans Euromold Cable Connectors and Bushings connect and terminate HV cables to Interface B bushings on switchgear and transformers.
Nexans Euromold provide high voltage cable accessories to suit the 7 main bushing interfaces : A, B, C (Compact), C (Symmetrical), D, E and F.
Nexans Euromold cable joints, cable terminations, epoxy bushings, angled (elbow) and straight plug-in or bolted separable connectors for connecting, jointing and terminating high voltage cables.
400 Series Interface C Compact Nexans Euromold Cable Connectors and Bushings connect and terminate HV cables to Interface C bushings on switchgear and transformers.
Nexans Euromold provide high voltage cable accessories to suit the 7 main bushing interfaces : A, B, C (Compact), C (Symmetrical), D, E and F.
Nexans Euromold cable joints, cable terminations, epoxy bushings, angled (elbow) and straight plug-in or bolted separable connectors for connecting, jointing and terminating high voltage cables.
ABB low voltage surge arresters LOVOS-5 and LOVOS-10 are a new generation of LV surge arresters ensuring electrical protection of overhead lines, electric energy receivers, distributing transformers and low voltage electrical equipment. Specify and install ABB LOVOS type surge arresters to protect low voltage power equipment from the effects of lightning and switching overvoltages.
ABB low voltage surge arrester types LOVOS-5 and LOVOS-10 selection criteria : continuous operating voltage Uc, voltage protection level Up and energy absorption capability.
The ABB LOVOS range provides protection along LV overhead lines, cables, motors, switches, any equipment connected to the line, from the LV side of distribution transformers up to measuring instruments.
Typical places of installation
• low voltage switchgears, distribution transformers (LV side)
• transition points of insulated and uninsulated, overhead and underground lines and cables
• electricity service entrance locations to buildings (in cabinets or at poles)
• at junctions (branching])
• every 500 / 1000 m of overhead line in locations of high lightning activity
• at the end of dead-end feeder line
• at the sealing ends of inserted cables
• at any apparatuses connected to secondary voltage source
ABB Power Products - Low Voltage Capacitators, Low Voltage Surge Arresters, Low Voltage Surge Arresters, Low Voltage Plugs & Sockets ATEX, Medium - High Voltage Fuses (Indoor & Outdoor), Current Transformers, Voltage Transformers, Voltage Surge Arresters, Vacuum Contactors.
ABB LV Low Voltage Surge Arresters
ABB LOVOS-5 ABB LOVOS-10
ABB Surge Arresters for Low Voltage Overhead Line Protection
ABB low voltage surge arresters LOVOS-5 and LOVOS-10 are a new generation of LV surge arresters ensuring electrical protection of overhead lines, electric energy receivers, distributing transformers and low voltage electrical equipment. Specify and install ABB LOVOS type surge arresters to protect low voltage power equipment from the effects of lightning and switching overvoltages.
ABB low voltage surge arrester types LOVOS-5 and LOVOS-10 selection criteria : continuous operating voltage Uc, voltage protection level Up and energy absorption capability.
Applications for Low Voltage LV Surge Arresters
The ABB LOVOS range provides protection along LV overhead lines, cables, motors, switches, any equipment connected to the line, from the LV side of distribution transformers up to measuring instruments.
Typical places of installation
Low voltage switchgears, distribution transformers (LV side)
Transition points of insulated and uninsulated, overhead and underground lines and cables
Electricity service entrance locations to buildings (in cabinets or at poles)
At junctions (branching])
Every 500 / 1000 m of overhead line in locations of high lightning activity
At the end of dead-end feeder line
At the sealing ends of inserted cables
At any apparatuses connected to secondary voltage source
ABB LOVOS Low Voltage LV Surge Arresters
ABB LOVOS-5 and ABB LOVOS-10 Low Voltage LV Surge Arresters
The principal active element of ABB LV low voltage LOVOS surge arresters is a metal oxide varistor characterised by high non-linearity - at a working voltage mainly a capacity current flows smaller than 1 mA. Any voltage increase causes a large increase of current flowing through the varistor, leading in turn to immediate limitation of further voltage increase on arrester terminals. When the overvoltage disappears, the surge arrester immediately returns to its basic state. Surge arresters are equipped with a disconnecting device, that disconnects the surge arrester from the low voltage electricity network if it becomes damaged as the result of overvoltage of too high energy or inadmissable voltage increase in the system. If such a situation occurs then the bottom terminal of the disconnecting device is rejected by the spring inside - this terminal remains suspended on an insulation leash.
ABB LOVOS-5 and ABB LOVOS-10 LV Surge Arresters - Advantages
Easy assembly and connection of ABB LOVOS surge arresters
Disconnecting device also fulfills function of damage indicator
Large choice of ABB LOVOS surge arrester accessories
Casing resistant to UV radiation, non-flammable
Maintenance free low voltage surge arresters
All surge arrester accessories are made from corrosion-resistant materials
In this briefing we explore the Phaseo power supplies and transformers offer presentation and application samples.
For more details:
Industrial%20Automation%20and%20Control&parent-category-id=4500&parent-subcategory-id=4510
Underground Cable Accessories
Elastimold® offers the industry's most complete package for managing underground cable connections.
Broad Product Range..
Elastimold accessories, available from 5kV to 138kV, connect, ground, splice, terminate and protect underground cable.
Elastimold Innovation
Elastimold’s long, innovative history includes pioneering such products as extended and repair elbows, jacket seal elbows, and shrink-fit joints.
trader, distributor, wholesaler and supplier of MCCB, RCBO, ABB Range Front Panel Residual Current Relays, Arc Guard System, Breakers & Switches, Current Measurement System, Low Voltage Power Distribution, Manual Moniter Starter, Lightning & Surge Protection, Protection & Monitoring Relays and many more
Magellan Power - High Reliability Australian Technology Innovative, Customise...Magellan Power
We have been supplying highly reliable DC & AC power systems and associated equipment since 1991. Our products can be found supporting critical infrastructure in Hospitals, Substations, Oil & Gas projects, Airports, Mining projects, Stadiums, Utilities & Defence around Australia and overseas
700 Series Interface E Elastimold Cable Connectors and Bushings connect and terminate HV cables to Interface E bushings on switchgear and transformers. Elastimold provide high voltage cable accessories to suit the 7 main bushing interfaces : A, B, C (Compact), C (Symmetrical), D, E and F. Elastimold cable joints, cable terminations, epoxy bushings, angled (elbow) and straight plug-in or bolted separable connectors for connecting, jointing and terminating high voltage cables. 700 Series Interface E, Elastimold Bushings * Bushing Voltage Range 33kV-36kV * Bushing Current Rating 800Amps & 1250Amps * Bushing Type 5/8" Bolted Aluminium Insert Elastimold separable elbow connectors are high voltage cable terminations used to connect polymeric (XLPE or EPR insulated) power cables to HV equipment including transformers, switchgear, capacitors and motors. 700 Series Connectors - 750LR Tee Connectors & 775LR Tee Connectors 800-1250Amps 35-630sqmm Slip on cable connectors - quick to install to high voltage switchgear and transformers (oil, air and gas insulated) Touchproof cable terminations - made from conductive EPDM rubber, fully screened HV termination for safety One part cable termination - built-in stress relief, insulation and outer semi-conductive layers Maintenance friendly - readily disconnectable cable connector for high voltage maintenance work Compact cable connectors - space-saving HV cable terminations for SF6 gas insulated switchgear (GIS) EPDM rubber cable connectors - resistant to ozone, corona, chemicals, water and atmospheric pollutants Flexibility - Elastimold cable connectors are disconnectable and re-useable. Re-use of the Elastimold high voltage cable connector permits site re-location of HV electrical equipment without requiring cable re-termination. HV High Voltage Cable Connectors, Specification - Elastimold dead-break separable cable connectors suit all international high voltage bushing interfaces for the termination of HV cable into switchgear, transformers and motors. Elastimold cable connectors terminate high voltage power cables (typically 11kV, 15kV, 24kV, 33kV, 36kV up to 52kV) into SF6 GIS gas insulated switchgear including Schneider, ABB, Areva and Siemens. Elastimold cable connectors meet the requirements of ANSI/IEEE 386 & 404 and CENELEC EN50180 & EN50181 for high voltage "dead-break" cable connection, i..e connectors installed and terminated onto un-energised high voltage power cable. US specification "load-break" cable connectors for high voltage energised cable termination are available. High Voltage Cable Connectors - Elastimold cable connectors (elbow and straight types) are specified to terminate XLPE or EPR insulated high voltage power cables with copper tape or copper wire screens up to 52kV. Elastimold cable connectors are available to suit and terminate lead covered HV cables for hydro-carbon industries (oil, gas, petrochemicals) with ATEX certification for hazardous area Zones 1 and Zones 2.
Isolation Procedures for Safe Working on Electrical Systems and Equipment by the JIB | solation Procedures for Safe Working on Electrical Systems and Equipment
This chart shows the safe isolation procedure that you should use when working on electrical systems and equipment.
You'll receive a printed copy of this from your Training Provider, but it's also here as a handy reference to keep electronically.
THE RULES OF SAFE ISOLATION ARE:
Obtain permission to start work (a Permit may be required in some situations)
Identify the source(s) of supply using an approved voltage indicator or test lamp
Prove that the approved voltage indicator or test lamp is functioning correctly
Isolate the supply(s)
Secure the isolation
Prove the system/equipment is DEAD using an approved voltage indicator or test lamp
Prove that the approved voltage indicator or test lamp is functioning correctly
Put up warning signs to tell other people that the electrical installation has been isolated
Once the system/equipment is proved DEAD, work can begin
Uploaded by THORNE & DERRICK LV HV Jointing, Earthing, Substation & Electrical Eqpt | Explosive Atmosphere Experts & ATEX IECEx.
THORNE & DERRICK based in the UK are international distributors of LV, MV & HV Cable Installation, Jointing, Substation & Electrical Equipment.
Since 1985, T&D have established an international reputation based on SERVICE | INTEGRITY | TRUST.
Contact us for 3M, ABB, Alroc, AN Wallis, CATU, Cembre, Centriforce, CMP, CSD, Elastimold, Ellis Patents, Emtelle, Euromold, Filoform , Furse, Lucy Electric & Zodion, Nexans, Pfisterer, Polypipe, Prysmian, Roxtec, Sicame, WT Henley.
Epistemic Interaction - tuning interfaces to provide information for AI supportAlan Dix
Paper presented at SYNERGY workshop at AVI 2024, Genoa, Italy. 3rd June 2024
https://alandix.com/academic/papers/synergy2024-epistemic/
As machine learning integrates deeper into human-computer interactions, the concept of epistemic interaction emerges, aiming to refine these interactions to enhance system adaptability. This approach encourages minor, intentional adjustments in user behaviour to enrich the data available for system learning. This paper introduces epistemic interaction within the context of human-system communication, illustrating how deliberate interaction design can improve system understanding and adaptation. Through concrete examples, we demonstrate the potential of epistemic interaction to significantly advance human-computer interaction by leveraging intuitive human communication strategies to inform system design and functionality, offering a novel pathway for enriching user-system engagements.
JMeter webinar - integration with InfluxDB and GrafanaRTTS
Watch this recorded webinar about real-time monitoring of application performance. See how to integrate Apache JMeter, the open-source leader in performance testing, with InfluxDB, the open-source time-series database, and Grafana, the open-source analytics and visualization application.
In this webinar, we will review the benefits of leveraging InfluxDB and Grafana when executing load tests and demonstrate how these tools are used to visualize performance metrics.
Length: 30 minutes
Session Overview
-------------------------------------------
During this webinar, we will cover the following topics while demonstrating the integrations of JMeter, InfluxDB and Grafana:
- What out-of-the-box solutions are available for real-time monitoring JMeter tests?
- What are the benefits of integrating InfluxDB and Grafana into the load testing stack?
- Which features are provided by Grafana?
- Demonstration of InfluxDB and Grafana using a practice web application
To view the webinar recording, go to:
https://www.rttsweb.com/jmeter-integration-webinar
UiPath Test Automation using UiPath Test Suite series, part 3DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 3. In this session, we will cover desktop automation along with UI automation.
Topics covered:
UI automation Introduction,
UI automation Sample
Desktop automation flow
Pradeep Chinnala, Senior Consultant Automation Developer @WonderBotz and UiPath MVP
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
Search and Society: Reimagining Information Access for Radical FuturesBhaskar Mitra
The field of Information retrieval (IR) is currently undergoing a transformative shift, at least partly due to the emerging applications of generative AI to information access. In this talk, we will deliberate on the sociotechnical implications of generative AI for information access. We will argue that there is both a critical necessity and an exciting opportunity for the IR community to re-center our research agendas on societal needs while dismantling the artificial separation between the work on fairness, accountability, transparency, and ethics in IR and the rest of IR research. Instead of adopting a reactionary strategy of trying to mitigate potential social harms from emerging technologies, the community should aim to proactively set the research agenda for the kinds of systems we should build inspired by diverse explicitly stated sociotechnical imaginaries. The sociotechnical imaginaries that underpin the design and development of information access technologies needs to be explicitly articulated, and we need to develop theories of change in context of these diverse perspectives. Our guiding future imaginaries must be informed by other academic fields, such as democratic theory and critical theory, and should be co-developed with social science scholars, legal scholars, civil rights and social justice activists, and artists, among others.
PHP Frameworks: I want to break free (IPC Berlin 2024)Ralf Eggert
In this presentation, we examine the challenges and limitations of relying too heavily on PHP frameworks in web development. We discuss the history of PHP and its frameworks to understand how this dependence has evolved. The focus will be on providing concrete tips and strategies to reduce reliance on these frameworks, based on real-world examples and practical considerations. The goal is to equip developers with the skills and knowledge to create more flexible and future-proof web applications. We'll explore the importance of maintaining autonomy in a rapidly changing tech landscape and how to make informed decisions in PHP development.
This talk is aimed at encouraging a more independent approach to using PHP frameworks, moving towards a more flexible and future-proof approach to PHP development.
Neuro-symbolic is not enough, we need neuro-*semantic*Frank van Harmelen
Neuro-symbolic (NeSy) AI is on the rise. However, simply machine learning on just any symbolic structure is not sufficient to really harvest the gains of NeSy. These will only be gained when the symbolic structures have an actual semantics. I give an operational definition of semantics as “predictable inference”.
All of this illustrated with link prediction over knowledge graphs, but the argument is general.
Let's dive deeper into the world of ODC! Ricardo Alves (OutSystems) will join us to tell all about the new Data Fabric. After that, Sezen de Bruijn (OutSystems) will get into the details on how to best design a sturdy architecture within ODC.
Essentials of Automations: Optimizing FME Workflows with ParametersSafe Software
Are you looking to streamline your workflows and boost your projects’ efficiency? Do you find yourself searching for ways to add flexibility and control over your FME workflows? If so, you’re in the right place.
Join us for an insightful dive into the world of FME parameters, a critical element in optimizing workflow efficiency. This webinar marks the beginning of our three-part “Essentials of Automation” series. This first webinar is designed to equip you with the knowledge and skills to utilize parameters effectively: enhancing the flexibility, maintainability, and user control of your FME projects.
Here’s what you’ll gain:
- Essentials of FME Parameters: Understand the pivotal role of parameters, including Reader/Writer, Transformer, User, and FME Flow categories. Discover how they are the key to unlocking automation and optimization within your workflows.
- Practical Applications in FME Form: Delve into key user parameter types including choice, connections, and file URLs. Allow users to control how a workflow runs, making your workflows more reusable. Learn to import values and deliver the best user experience for your workflows while enhancing accuracy.
- Optimization Strategies in FME Flow: Explore the creation and strategic deployment of parameters in FME Flow, including the use of deployment and geometry parameters, to maximize workflow efficiency.
- Pro Tips for Success: Gain insights on parameterizing connections and leveraging new features like Conditional Visibility for clarity and simplicity.
We’ll wrap up with a glimpse into future webinars, followed by a Q&A session to address your specific questions surrounding this topic.
Don’t miss this opportunity to elevate your FME expertise and drive your projects to new heights of efficiency.
DevOps and Testing slides at DASA ConnectKari Kakkonen
My and Rik Marselis slides at 30.5.2024 DASA Connect conference. We discuss about what is testing, then what is agile testing and finally what is Testing in DevOps. Finally we had lovely workshop with the participants trying to find out different ways to think about quality and testing in different parts of the DevOps infinity loop.
Kubernetes & AI - Beauty and the Beast !?! @KCD Istanbul 2024Tobias Schneck
As AI technology is pushing into IT I was wondering myself, as an “infrastructure container kubernetes guy”, how get this fancy AI technology get managed from an infrastructure operational view? Is it possible to apply our lovely cloud native principals as well? What benefit’s both technologies could bring to each other?
Let me take this questions and provide you a short journey through existing deployment models and use cases for AI software. On practical examples, we discuss what cloud/on-premise strategy we may need for applying it to our own infrastructure to get it to work from an enterprise perspective. I want to give an overview about infrastructure requirements and technologies, what could be beneficial or limiting your AI use cases in an enterprise environment. An interactive Demo will give you some insides, what approaches I got already working for real.
Slack (or Teams) Automation for Bonterra Impact Management (fka Social Soluti...Jeffrey Haguewood
Sidekick Solutions uses Bonterra Impact Management (fka Social Solutions Apricot) and automation solutions to integrate data for business workflows.
We believe integration and automation are essential to user experience and the promise of efficient work through technology. Automation is the critical ingredient to realizing that full vision. We develop integration products and services for Bonterra Case Management software to support the deployment of automations for a variety of use cases.
This video focuses on the notifications, alerts, and approval requests using Slack for Bonterra Impact Management. The solutions covered in this webinar can also be deployed for Microsoft Teams.
Interested in deploying notification automations for Bonterra Impact Management? Contact us at sales@sidekicksolutionsllc.com to discuss next steps.
The Art of the Pitch: WordPress Relationships and SalesLaura Byrne
Clients don’t know what they don’t know. What web solutions are right for them? How does WordPress come into the picture? How do you make sure you understand scope and timeline? What do you do if sometime changes?
All these questions and more will be explored as we talk about matching clients’ needs with what your agency offers without pulling teeth or pulling your hair out. Practical tips, and strategies for successful relationship building that leads to closing the deal.
Accelerate your Kubernetes clusters with Varnish CachingThijs Feryn
A presentation about the usage and availability of Varnish on Kubernetes. This talk explores the capabilities of Varnish caching and shows how to use the Varnish Helm chart to deploy it to Kubernetes.
This presentation was delivered at K8SUG Singapore. See https://feryn.eu/presentations/accelerate-your-kubernetes-clusters-with-varnish-caching-k8sug-singapore-28-2024 for more details.
2. 2 Surge arresters | ABB High Voltage Products
Surge arresters for medium voltage systems 4
Surge arresters for AC traction systems 8
Surge arresters for DC traction systems 10
Surge arresters for SF6 gas-insulated switchgear 12
3. ABB High Voltage Products | Surge arresters 3
Surge arrester from ABB Switzerland
in Wettingen
ABB Switzerland Ltd. produces surge arresters for all
applications. This product overview makes it easy to choose
the right arrester.
We have created a selection table for each of our product
groups. In the left hand column of the selection table you will
find a list of applications, then simply look for the right product
as indicated by the dots. All arrester types are depicted with
an indication of the system voltage, the continuous operating
voltage, the high current impulse and the charge handling capa-
bility. Additional applications not mentioned in this overview
are possible. Make your choice and contact us. We will be happy
to help you to find the right product and submit a detailed offer.
4. 4 Surge arresters | ABB High Voltage Products
Surge arresters
for medium voltage systems
ABB Switzerland Ltd. produces high-grade metal-oxide
surge arresters for use in metal-encapsulated switchgear as
well as for use in distribution networks for the protection of
overhead lines, cables, stations, transformers, generators,
capacitors and for the protection of motors and components
of power electronics and secondary equipment.
The surge arresters limit harmful overvoltages, which are
generated in the network by lightning strikes or switching
actions thus improving the availability of the power supply.
The surge arresters fulfill special high requirements regarding
ambient conditions, energy handling capability, protection level
and stability in service.
5.
6. 6 Surge arresters | ABB High Voltage Products
Surge arresters for medium voltage systems
Type POLIM-D POLIM-D..PI-2 /
PI-3
POLIM-K MWD MWK
Technical data
System voltage Us ≤ 52 kV ≤ 52 kV ≤ 52 kV ≤ 52 kV ≤ 52 kV
Continuous operating voltage Uc ≤ 44 kV ≤ 42 kV ≤ 44 kV ≤ 44 kV ≤ 44 kV
Nominal discharge current In 10 kA 10 kA 10 kA 10 kA 10 kA
High current impulse 100 kA 65 kA 100 kA 100 kA 100 kA
IEC line discharge class 1 1 2 2 2
Application Indoor
and outdoor
Indoor
and outdoor
Indoor
and outdoor
Indoor Indoor
and outdoor
Applications
Recommended for the
overvoltage protection of:
Transformers • • • • •
Overhead lines • • •
Cables • • •
Rotating machines • •
Capacitors, capacitor banks • • • •
Cable sheath protection of HV-cables • •
Switchgear and switching cubicles • •
Metal-encapsulated switchgear •
Inductances, reactors, PLC line traps •
Transformers of arc furnace
Further medium voltage apparatuses • • • •
Component of secondary equipment
Power electronics
7. ABB High Voltage Products | Surge arresters 7
Type POLIM-C..N POLIM-C..LB POLIM-I..N POLIM-S..N POLIM-R..N POLIM-H..N
Technical data
System voltage Us ≤ 7.5 kV ≤ 5 kV ≤ 72 kV ≤ 72 kV ≤ 1 kV ≤ 72 kV
Continuous operating voltage Uc ≤ 7.5 kV ≤ 4.8 kV ≤ 56 kV ≤ 56 kV ≤ 1 kV ≤ 58 kV
Nominal discharge current In 10 kA 10 kA 10 kA 10 kA 20 kA 20 kA
High current impulse 100 kA 100 kA 100 kA 100 kA 100 kA 100 kA
IEC line discharge class 2 2 2 3 4 4
Application Indoor
and outdoor
Indoor Indoor
and outdoor
Indoor
and outdoor
Indoor
and outdoor
Indoor
and outdoor
Applications
Recommended for the
overvoltage protection of:
Transformers • • • •
Overhead lines • • •
Cables • • •
Rotating machines • • • •
Capacitors, capacitor banks • • •
Cable sheath protection of HV-cables • • •
Switchgear and switching cubicles
Metal-encapsulated switchgear
Inductances, reactors, PLC line traps •
Transformers of arc furnace • •
Further medium voltage apparatuses • • • • •
Components of secondary equipment • •
Power electronics • •
8. 8 Surge arresters | ABB High Voltage Products
ABB Switzerland Ltd. is a specialist for metal-oxide
surge arresters for AC traction systems, intended for
fixed installations and for installation on rolling stock.
These arresters fulfill the especially high electrical and
mechanical requirements for use in traction systems.
Their usage increases the availability of the power supply
and of the rail service.
Surge arresters for
AC traction systems
9. ABB High Voltage Products | Surge arresters 9
All ABB railway products can be found at
www.abb.com/railway
Type POLIM-C..N POLIM-K POLIM-I..N POLIM-S..N POLIM-R..N POLIM-H..N
Technical data
System voltage Us ≤ 7,2 kV ≤ 25 kV ≤ 25 kV ≤ 25 kV ≤ 1 kV ≤ 25 kV
Continuous operating voltage Uc ≤ 7,5 kV ≤ 44 kV ≤ 44 kV ≤ 44 kV ≤ 0,78 kV ≤ 44 kV
Nominal discharge current In 10 kA 10 kA 10 kA 10 kA 20 kA 20 kA
High current impulse 100 kA 100 kA 100 kA 100 kA 100 kA 100 kA
IEC line discharge class 2 2 2 3 4 4
Application Outdoor
and indoor
Outdoor
and indoor
Outdoor
and indoor
Outdoor
and indoor
Outdoor
and indoor
Outdoor
and indoor
Application
Rolling stock
• • • •
High speed trains
• •
Fixed installations
• • • •
Secondary equipment
• •
• Primary type, recommended according to required line discharge class
• Alternatively applicable for low electrical or mechanical requirements
10. 10 Surge arresters | ABB High Voltage Products
The metal-oxide surge arresters produced by ABB Switzer-
land Ltd. for DC traction systems are developed and type
tested according to the new European standard EN 50526-1
which is specifically for metal-oxide surge arrester in railway
application up to 3kV nominal voltage. The surge arresters
also meet the requirements for A1/A2 functionality according
to VDV 525 recommendation.
The rails of DC traction systems are isolated from earth
to avoid stray currents in the ground. Voltage limiting devices
are being used to avoid unacceptable touch voltages during
operation and in fault conditions.
The voltage limiting device type HVL is a hybrid composed
by a metal-oxide surge arrester connected in parallel with
thyristors. Dangerous transient over-voltages from lightning
and switching are limited by the surge arrester. Longer lasting
over-voltages from the traction system are limited by the
thyristors after triggering.
Surge arresters for
DC traction systems
11. ABB High Voltage Products | Surge arresters 11
Type POLIM-C..HD POLIM-H..ND POLIM-H..SD POLIM-R..ND POLIM-X..ND POLIM 4,5 ID
Technical data
Nominal voltage Un ≤ 3 kV ≤ 3 kV ≤ 3 kV ≤ 0,75 kV ≤ 3 kV ≤ 3 kV
Continuous operating voltage Uc ≤ 4,7 kV ≤ 4,7 kV ≤ 4,2 kV ≤ 1,0 kV ≤ 4,7 kV 4,5 kV
Nominal discharge current In 10 kA 10 kA 10 kA 10 kA 20 kA 20 kA
High current impulse 100 kA 100 kA 100 kA 100 kA 200 kA 200 kA
Arrester class DC-A DC-B DC-B DC-B DC-C DC-C
Charge transfer capability Qt 1 As 2,5 As 2,5 As 2,5 As 7,5 As > 7,5 As
Application Indoor
and outdoor
Indoor
and outdoor
Indoor
and outdoor
Indoor
and outdoor
Indoor
and outdoor
Indoor
Application
Rolling stock • • •
High speed trains • •
Fixed installations A1 function • • • • •
Fixed installations A2 function • • • • •
Secondary equipment • •
Low-voltage limiter
Type
HVL
Technical data/Application
Nominal voltage Un ≤ 3 kV
Application Indoor
and outdoor
Low-voltage limiter •
• Primary type, recommended according to required charge transfer class
• Alternatively applicable for low electrical or mechanical requirements
All ABB railway products can be found at
www.abb.com/railway
12. 12 Surge arresters | ABB High Voltage Products
Surge arresters for SF6 gas-insulated
high-voltage switchgear
ABB Switzerland Ltd. is a leading manufacturer of
surge arresters in SF6 gas-insulated design for mounting
on all commercial GIS switchgear.
Monitoring devices are available to control the status of the
surge arresters in AC systems. They count and classify surge
events and measure the leakage current of the surge arrester.
13. ABB High Voltage Products | Surge arresters 13
Type AZ041 AZY14 AZ14 AZ14 AZ32M AZ32G AZ32A
Technical data
System voltage Us ≤ 170 kV ≤ 245 kV ≤ 245 kV ≤ 300 kV ≤ 420 kV ≤ 420 kV ≤ 550 kV
Continuous voltage Uc ≤ 154 kV ≤ 174 kV ≤ 174 kV ≤ 202 kV ≤ 317 kV ≤ 317 kV ≤ 374 kV
Nominal discharge current In 10 kA/20 kA 10 kA/20 kA 10 kA/20 kA 10 kA/20 kA 20 kA 20 kA 20 kA
High current impulse 100 kA 100 kA 100 kA 100 kA 100 kA 100 kA 100 kA
Phases per enclosure 3 3 1 1 1 1 1
IEC line discharge class 3/4 3/4 3/4 3/4 5 5 5
Type SAM 3.0
Technical data/Application
Measuring range of leakage current 0–20 mA
Counter for surge events
with amplitudes of
100 A–100 kA
Application Indoor and outdoor
14. 14 Surge arresters | ABB High Voltage Products
As a technology leader, ABB has played a leading role in the
development and production of surge arresters from the
beginning. The initial patents for the metal-oxide technology and
the direct molding of arresters in silicone form the foundation
for today’s surge arresters to cover all energy requirements
around the world.
Basic research, continuous improvement and active participation
in international organizations, such as IEC, CENELC and Cigré,
ensure that ABB will continue to lead the way in the field of
overvoltage protection in the future as well. Our experience and
user-relevant research results are published in our detailed
application guidelines for our customers.
With surge arresters from
ABB Switzerland Ltd.
you are buying the original
15. ABB High Voltage Products | Surge arresters 15
Overvoltage protection
Metal oxide surge arresters
in medium voltage systems
Application guidelines
Overvoltage protection
Metal oxide surge arresters
in railway facilities
Application guidelines
Application Guidelines Overvoltage Protection: Dimensioning, testing and application of
metal-oxide surge arresters in medium voltage systems and railway facilities
Application guidelines Application guidelines
Application guidelines